Merge branch 'for-linus' of git://git.infradead.org/users/sameo/mfd-2.6
[linux-btrfs-devel.git] / drivers / net / 3c505.c
blob88d766ee0e1bc35c89a53effa08d9c41b80fa198
1 /*
2 * Linux Ethernet device driver for the 3Com Etherlink Plus (3C505)
3 * By Craig Southeren, Juha Laiho and Philip Blundell
5 * 3c505.c This module implements an interface to the 3Com
6 * Etherlink Plus (3c505) Ethernet card. Linux device
7 * driver interface reverse engineered from the Linux 3C509
8 * device drivers. Some 3C505 information gleaned from
9 * the Crynwr packet driver. Still this driver would not
10 * be here without 3C505 technical reference provided by
11 * 3Com.
13 * $Id: 3c505.c,v 1.10 1996/04/16 13:06:27 phil Exp $
15 * Authors: Linux 3c505 device driver by
16 * Craig Southeren, <craigs@ineluki.apana.org.au>
17 * Final debugging by
18 * Andrew Tridgell, <tridge@nimbus.anu.edu.au>
19 * Auto irq/address, tuning, cleanup and v1.1.4+ kernel mods by
20 * Juha Laiho, <jlaiho@ichaos.nullnet.fi>
21 * Linux 3C509 driver by
22 * Donald Becker, <becker@super.org>
23 * (Now at <becker@scyld.com>)
24 * Crynwr packet driver by
25 * Krishnan Gopalan and Gregg Stefancik,
26 * Clemson University Engineering Computer Operations.
27 * Portions of the code have been adapted from the 3c505
28 * driver for NCSA Telnet by Bruce Orchard and later
29 * modified by Warren Van Houten and krus@diku.dk.
30 * 3C505 technical information provided by
31 * Terry Murphy, of 3Com Network Adapter Division
32 * Linux 1.3.0 changes by
33 * Alan Cox <Alan.Cox@linux.org>
34 * More debugging, DMA support, currently maintained by
35 * Philip Blundell <philb@gnu.org>
36 * Multicard/soft configurable dma channel/rev 2 hardware support
37 * by Christopher Collins <ccollins@pcug.org.au>
38 * Ethtool support (jgarzik), 11/17/2001
41 #define DRV_NAME "3c505"
42 #define DRV_VERSION "1.10a"
45 /* Theory of operation:
47 * The 3c505 is quite an intelligent board. All communication with it is done
48 * by means of Primary Command Blocks (PCBs); these are transferred using PIO
49 * through the command register. The card has 256k of on-board RAM, which is
50 * used to buffer received packets. It might seem at first that more buffers
51 * are better, but in fact this isn't true. From my tests, it seems that
52 * more than about 10 buffers are unnecessary, and there is a noticeable
53 * performance hit in having more active on the card. So the majority of the
54 * card's memory isn't, in fact, used. Sadly, the card only has one transmit
55 * buffer and, short of loading our own firmware into it (which is what some
56 * drivers resort to) there's nothing we can do about this.
58 * We keep up to 4 "receive packet" commands active on the board at a time.
59 * When a packet comes in, so long as there is a receive command active, the
60 * board will send us a "packet received" PCB and then add the data for that
61 * packet to the DMA queue. If a DMA transfer is not already in progress, we
62 * set one up to start uploading the data. We have to maintain a list of
63 * backlogged receive packets, because the card may decide to tell us about
64 * a newly-arrived packet at any time, and we may not be able to start a DMA
65 * transfer immediately (ie one may already be going on). We can't NAK the
66 * PCB, because then it would throw the packet away.
68 * Trying to send a PCB to the card at the wrong moment seems to have bad
69 * effects. If we send it a transmit PCB while a receive DMA is happening,
70 * it will just NAK the PCB and so we will have wasted our time. Worse, it
71 * sometimes seems to interrupt the transfer. The majority of the low-level
72 * code is protected by one huge semaphore -- "busy" -- which is set whenever
73 * it probably isn't safe to do anything to the card. The receive routine
74 * must gain a lock on "busy" before it can start a DMA transfer, and the
75 * transmit routine must gain a lock before it sends the first PCB to the card.
76 * The send_pcb() routine also has an internal semaphore to protect it against
77 * being re-entered (which would be disastrous) -- this is needed because
78 * several things can happen asynchronously (re-priming the receiver and
79 * asking the card for statistics, for example). send_pcb() will also refuse
80 * to talk to the card at all if a DMA upload is happening. The higher-level
81 * networking code will reschedule a later retry if some part of the driver
82 * is blocked. In practice, this doesn't seem to happen very often.
85 /* This driver may now work with revision 2.x hardware, since all the read
86 * operations on the HCR have been removed (we now keep our own softcopy).
87 * But I don't have an old card to test it on.
89 * This has had the bad effect that the autoprobe routine is now a bit
90 * less friendly to other devices. However, it was never very good.
91 * before, so I doubt it will hurt anybody.
94 /* The driver is a mess. I took Craig's and Juha's code, and hacked it firstly
95 * to make it more reliable, and secondly to add DMA mode. Many things could
96 * probably be done better; the concurrency protection is particularly awful.
99 #include <linux/module.h>
100 #include <linux/kernel.h>
101 #include <linux/string.h>
102 #include <linux/interrupt.h>
103 #include <linux/errno.h>
104 #include <linux/in.h>
105 #include <linux/ioport.h>
106 #include <linux/spinlock.h>
107 #include <linux/ethtool.h>
108 #include <linux/delay.h>
109 #include <linux/bitops.h>
110 #include <linux/gfp.h>
112 #include <asm/uaccess.h>
113 #include <asm/io.h>
114 #include <asm/dma.h>
116 #include <linux/netdevice.h>
117 #include <linux/etherdevice.h>
118 #include <linux/skbuff.h>
119 #include <linux/init.h>
121 #include "3c505.h"
123 /*********************************************************
125 * define debug messages here as common strings to reduce space
127 *********************************************************/
129 #define filename __FILE__
131 #define timeout_msg "*** timeout at %s:%s (line %d) ***\n"
132 #define TIMEOUT_MSG(lineno) \
133 pr_notice(timeout_msg, filename, __func__, (lineno))
135 #define invalid_pcb_msg "*** invalid pcb length %d at %s:%s (line %d) ***\n"
136 #define INVALID_PCB_MSG(len) \
137 pr_notice(invalid_pcb_msg, (len), filename, __func__, __LINE__)
139 #define search_msg "%s: Looking for 3c505 adapter at address %#x..."
141 #define stilllooking_msg "still looking..."
143 #define found_msg "found.\n"
145 #define notfound_msg "not found (reason = %d)\n"
147 #define couldnot_msg "%s: 3c505 not found\n"
149 /*********************************************************
151 * various other debug stuff
153 *********************************************************/
155 #ifdef ELP_DEBUG
156 static int elp_debug = ELP_DEBUG;
157 #else
158 static int elp_debug;
159 #endif
160 #define debug elp_debug
163 * 0 = no messages (well, some)
164 * 1 = messages when high level commands performed
165 * 2 = messages when low level commands performed
166 * 3 = messages when interrupts received
169 /*****************************************************************
171 * List of I/O-addresses we try to auto-sense
172 * Last element MUST BE 0!
173 *****************************************************************/
175 static int addr_list[] __initdata = {0x300, 0x280, 0x310, 0};
177 /* Dma Memory related stuff */
179 static unsigned long dma_mem_alloc(int size)
181 int order = get_order(size);
182 return __get_dma_pages(GFP_KERNEL, order);
186 /*****************************************************************
188 * Functions for I/O (note the inline !)
190 *****************************************************************/
192 static inline unsigned char inb_status(unsigned int base_addr)
194 return inb(base_addr + PORT_STATUS);
197 static inline int inb_command(unsigned int base_addr)
199 return inb(base_addr + PORT_COMMAND);
202 static inline void outb_control(unsigned char val, struct net_device *dev)
204 outb(val, dev->base_addr + PORT_CONTROL);
205 ((elp_device *)(netdev_priv(dev)))->hcr_val = val;
208 #define HCR_VAL(x) (((elp_device *)(netdev_priv(x)))->hcr_val)
210 static inline void outb_command(unsigned char val, unsigned int base_addr)
212 outb(val, base_addr + PORT_COMMAND);
215 static inline unsigned int backlog_next(unsigned int n)
217 return (n + 1) % BACKLOG_SIZE;
220 /*****************************************************************
222 * useful functions for accessing the adapter
224 *****************************************************************/
227 * use this routine when accessing the ASF bits as they are
228 * changed asynchronously by the adapter
231 /* get adapter PCB status */
232 #define GET_ASF(addr) \
233 (get_status(addr)&ASF_PCB_MASK)
235 static inline int get_status(unsigned int base_addr)
237 unsigned long timeout = jiffies + 10*HZ/100;
238 register int stat1;
239 do {
240 stat1 = inb_status(base_addr);
241 } while (stat1 != inb_status(base_addr) && time_before(jiffies, timeout));
242 if (time_after_eq(jiffies, timeout))
243 TIMEOUT_MSG(__LINE__);
244 return stat1;
247 static inline void set_hsf(struct net_device *dev, int hsf)
249 elp_device *adapter = netdev_priv(dev);
250 unsigned long flags;
252 spin_lock_irqsave(&adapter->lock, flags);
253 outb_control((HCR_VAL(dev) & ~HSF_PCB_MASK) | hsf, dev);
254 spin_unlock_irqrestore(&adapter->lock, flags);
257 static bool start_receive(struct net_device *, pcb_struct *);
259 static inline void adapter_reset(struct net_device *dev)
261 unsigned long timeout;
262 elp_device *adapter = netdev_priv(dev);
263 unsigned char orig_hcr = adapter->hcr_val;
265 outb_control(0, dev);
267 if (inb_status(dev->base_addr) & ACRF) {
268 do {
269 inb_command(dev->base_addr);
270 timeout = jiffies + 2*HZ/100;
271 while (time_before_eq(jiffies, timeout) && !(inb_status(dev->base_addr) & ACRF));
272 } while (inb_status(dev->base_addr) & ACRF);
273 set_hsf(dev, HSF_PCB_NAK);
275 outb_control(adapter->hcr_val | ATTN | DIR, dev);
276 mdelay(10);
277 outb_control(adapter->hcr_val & ~ATTN, dev);
278 mdelay(10);
279 outb_control(adapter->hcr_val | FLSH, dev);
280 mdelay(10);
281 outb_control(adapter->hcr_val & ~FLSH, dev);
282 mdelay(10);
284 outb_control(orig_hcr, dev);
285 if (!start_receive(dev, &adapter->tx_pcb))
286 pr_err("%s: start receive command failed\n", dev->name);
289 /* Check to make sure that a DMA transfer hasn't timed out. This should
290 * never happen in theory, but seems to occur occasionally if the card gets
291 * prodded at the wrong time.
293 static inline void check_3c505_dma(struct net_device *dev)
295 elp_device *adapter = netdev_priv(dev);
296 if (adapter->dmaing && time_after(jiffies, adapter->current_dma.start_time + 10)) {
297 unsigned long flags, f;
298 pr_err("%s: DMA %s timed out, %d bytes left\n", dev->name,
299 adapter->current_dma.direction ? "download" : "upload",
300 get_dma_residue(dev->dma));
301 spin_lock_irqsave(&adapter->lock, flags);
302 adapter->dmaing = 0;
303 adapter->busy = 0;
305 f=claim_dma_lock();
306 disable_dma(dev->dma);
307 release_dma_lock(f);
309 if (adapter->rx_active)
310 adapter->rx_active--;
311 outb_control(adapter->hcr_val & ~(DMAE | TCEN | DIR), dev);
312 spin_unlock_irqrestore(&adapter->lock, flags);
316 /* Primitive functions used by send_pcb() */
317 static inline bool send_pcb_slow(unsigned int base_addr, unsigned char byte)
319 unsigned long timeout;
320 outb_command(byte, base_addr);
321 for (timeout = jiffies + 5*HZ/100; time_before(jiffies, timeout);) {
322 if (inb_status(base_addr) & HCRE)
323 return false;
325 pr_warning("3c505: send_pcb_slow timed out\n");
326 return true;
329 static inline bool send_pcb_fast(unsigned int base_addr, unsigned char byte)
331 unsigned int timeout;
332 outb_command(byte, base_addr);
333 for (timeout = 0; timeout < 40000; timeout++) {
334 if (inb_status(base_addr) & HCRE)
335 return false;
337 pr_warning("3c505: send_pcb_fast timed out\n");
338 return true;
341 /* Check to see if the receiver needs restarting, and kick it if so */
342 static inline void prime_rx(struct net_device *dev)
344 elp_device *adapter = netdev_priv(dev);
345 while (adapter->rx_active < ELP_RX_PCBS && netif_running(dev)) {
346 if (!start_receive(dev, &adapter->itx_pcb))
347 break;
351 /*****************************************************************
353 * send_pcb
354 * Send a PCB to the adapter.
356 * output byte to command reg --<--+
357 * wait until HCRE is non zero |
358 * loop until all bytes sent -->--+
359 * set HSF1 and HSF2 to 1
360 * output pcb length
361 * wait until ASF give ACK or NAK
362 * set HSF1 and HSF2 to 0
364 *****************************************************************/
366 /* This can be quite slow -- the adapter is allowed to take up to 40ms
367 * to respond to the initial interrupt.
369 * We run initially with interrupts turned on, but with a semaphore set
370 * so that nobody tries to re-enter this code. Once the first byte has
371 * gone through, we turn interrupts off and then send the others (the
372 * timeout is reduced to 500us).
375 static bool send_pcb(struct net_device *dev, pcb_struct * pcb)
377 int i;
378 unsigned long timeout;
379 elp_device *adapter = netdev_priv(dev);
380 unsigned long flags;
382 check_3c505_dma(dev);
384 if (adapter->dmaing && adapter->current_dma.direction == 0)
385 return false;
387 /* Avoid contention */
388 if (test_and_set_bit(1, &adapter->send_pcb_semaphore)) {
389 if (elp_debug >= 3) {
390 pr_debug("%s: send_pcb entered while threaded\n", dev->name);
392 return false;
395 * load each byte into the command register and
396 * wait for the HCRE bit to indicate the adapter
397 * had read the byte
399 set_hsf(dev, 0);
401 if (send_pcb_slow(dev->base_addr, pcb->command))
402 goto abort;
404 spin_lock_irqsave(&adapter->lock, flags);
406 if (send_pcb_fast(dev->base_addr, pcb->length))
407 goto sti_abort;
409 for (i = 0; i < pcb->length; i++) {
410 if (send_pcb_fast(dev->base_addr, pcb->data.raw[i]))
411 goto sti_abort;
414 outb_control(adapter->hcr_val | 3, dev); /* signal end of PCB */
415 outb_command(2 + pcb->length, dev->base_addr);
417 /* now wait for the acknowledgement */
418 spin_unlock_irqrestore(&adapter->lock, flags);
420 for (timeout = jiffies + 5*HZ/100; time_before(jiffies, timeout);) {
421 switch (GET_ASF(dev->base_addr)) {
422 case ASF_PCB_ACK:
423 adapter->send_pcb_semaphore = 0;
424 return true;
426 case ASF_PCB_NAK:
427 #ifdef ELP_DEBUG
428 pr_debug("%s: send_pcb got NAK\n", dev->name);
429 #endif
430 goto abort;
434 if (elp_debug >= 1)
435 pr_debug("%s: timeout waiting for PCB acknowledge (status %02x)\n",
436 dev->name, inb_status(dev->base_addr));
437 goto abort;
439 sti_abort:
440 spin_unlock_irqrestore(&adapter->lock, flags);
441 abort:
442 adapter->send_pcb_semaphore = 0;
443 return false;
447 /*****************************************************************
449 * receive_pcb
450 * Read a PCB from the adapter
452 * wait for ACRF to be non-zero ---<---+
453 * input a byte |
454 * if ASF1 and ASF2 were not both one |
455 * before byte was read, loop --->---+
456 * set HSF1 and HSF2 for ack
458 *****************************************************************/
460 static bool receive_pcb(struct net_device *dev, pcb_struct * pcb)
462 int i, j;
463 int total_length;
464 int stat;
465 unsigned long timeout;
466 unsigned long flags;
468 elp_device *adapter = netdev_priv(dev);
470 set_hsf(dev, 0);
472 /* get the command code */
473 timeout = jiffies + 2*HZ/100;
474 while (((stat = get_status(dev->base_addr)) & ACRF) == 0 && time_before(jiffies, timeout));
475 if (time_after_eq(jiffies, timeout)) {
476 TIMEOUT_MSG(__LINE__);
477 return false;
479 pcb->command = inb_command(dev->base_addr);
481 /* read the data length */
482 timeout = jiffies + 3*HZ/100;
483 while (((stat = get_status(dev->base_addr)) & ACRF) == 0 && time_before(jiffies, timeout));
484 if (time_after_eq(jiffies, timeout)) {
485 TIMEOUT_MSG(__LINE__);
486 pr_info("%s: status %02x\n", dev->name, stat);
487 return false;
489 pcb->length = inb_command(dev->base_addr);
491 if (pcb->length > MAX_PCB_DATA) {
492 INVALID_PCB_MSG(pcb->length);
493 adapter_reset(dev);
494 return false;
496 /* read the data */
497 spin_lock_irqsave(&adapter->lock, flags);
498 for (i = 0; i < MAX_PCB_DATA; i++) {
499 for (j = 0; j < 20000; j++) {
500 stat = get_status(dev->base_addr);
501 if (stat & ACRF)
502 break;
504 pcb->data.raw[i] = inb_command(dev->base_addr);
505 if ((stat & ASF_PCB_MASK) == ASF_PCB_END || j >= 20000)
506 break;
508 spin_unlock_irqrestore(&adapter->lock, flags);
509 if (i >= MAX_PCB_DATA) {
510 INVALID_PCB_MSG(i);
511 return false;
513 if (j >= 20000) {
514 TIMEOUT_MSG(__LINE__);
515 return false;
517 /* the last "data" byte was really the length! */
518 total_length = pcb->data.raw[i];
520 /* safety check total length vs data length */
521 if (total_length != (pcb->length + 2)) {
522 if (elp_debug >= 2)
523 pr_warning("%s: mangled PCB received\n", dev->name);
524 set_hsf(dev, HSF_PCB_NAK);
525 return false;
528 if (pcb->command == CMD_RECEIVE_PACKET_COMPLETE) {
529 if (test_and_set_bit(0, (void *) &adapter->busy)) {
530 if (backlog_next(adapter->rx_backlog.in) == adapter->rx_backlog.out) {
531 set_hsf(dev, HSF_PCB_NAK);
532 pr_warning("%s: PCB rejected, transfer in progress and backlog full\n", dev->name);
533 pcb->command = 0;
534 return true;
535 } else {
536 pcb->command = 0xff;
540 set_hsf(dev, HSF_PCB_ACK);
541 return true;
544 /******************************************************
546 * queue a receive command on the adapter so we will get an
547 * interrupt when a packet is received.
549 ******************************************************/
551 static bool start_receive(struct net_device *dev, pcb_struct * tx_pcb)
553 bool status;
554 elp_device *adapter = netdev_priv(dev);
556 if (elp_debug >= 3)
557 pr_debug("%s: restarting receiver\n", dev->name);
558 tx_pcb->command = CMD_RECEIVE_PACKET;
559 tx_pcb->length = sizeof(struct Rcv_pkt);
560 tx_pcb->data.rcv_pkt.buf_seg
561 = tx_pcb->data.rcv_pkt.buf_ofs = 0; /* Unused */
562 tx_pcb->data.rcv_pkt.buf_len = 1600;
563 tx_pcb->data.rcv_pkt.timeout = 0; /* set timeout to zero */
564 status = send_pcb(dev, tx_pcb);
565 if (status)
566 adapter->rx_active++;
567 return status;
570 /******************************************************
572 * extract a packet from the adapter
573 * this routine is only called from within the interrupt
574 * service routine, so no cli/sti calls are needed
575 * note that the length is always assumed to be even
577 ******************************************************/
579 static void receive_packet(struct net_device *dev, int len)
581 int rlen;
582 elp_device *adapter = netdev_priv(dev);
583 void *target;
584 struct sk_buff *skb;
585 unsigned long flags;
587 rlen = (len + 1) & ~1;
588 skb = dev_alloc_skb(rlen + 2);
590 if (!skb) {
591 pr_warning("%s: memory squeeze, dropping packet\n", dev->name);
592 target = adapter->dma_buffer;
593 adapter->current_dma.target = NULL;
594 /* FIXME: stats */
595 return;
598 skb_reserve(skb, 2);
599 target = skb_put(skb, rlen);
600 if ((unsigned long)(target + rlen) >= MAX_DMA_ADDRESS) {
601 adapter->current_dma.target = target;
602 target = adapter->dma_buffer;
603 } else {
604 adapter->current_dma.target = NULL;
607 /* if this happens, we die */
608 if (test_and_set_bit(0, (void *) &adapter->dmaing))
609 pr_err("%s: rx blocked, DMA in progress, dir %d\n",
610 dev->name, adapter->current_dma.direction);
612 adapter->current_dma.direction = 0;
613 adapter->current_dma.length = rlen;
614 adapter->current_dma.skb = skb;
615 adapter->current_dma.start_time = jiffies;
617 outb_control(adapter->hcr_val | DIR | TCEN | DMAE, dev);
619 flags=claim_dma_lock();
620 disable_dma(dev->dma);
621 clear_dma_ff(dev->dma);
622 set_dma_mode(dev->dma, 0x04); /* dma read */
623 set_dma_addr(dev->dma, isa_virt_to_bus(target));
624 set_dma_count(dev->dma, rlen);
625 enable_dma(dev->dma);
626 release_dma_lock(flags);
628 if (elp_debug >= 3) {
629 pr_debug("%s: rx DMA transfer started\n", dev->name);
632 if (adapter->rx_active)
633 adapter->rx_active--;
635 if (!adapter->busy)
636 pr_warning("%s: receive_packet called, busy not set.\n", dev->name);
639 /******************************************************
641 * interrupt handler
643 ******************************************************/
645 static irqreturn_t elp_interrupt(int irq, void *dev_id)
647 int len;
648 int dlen;
649 int icount = 0;
650 struct net_device *dev = dev_id;
651 elp_device *adapter = netdev_priv(dev);
652 unsigned long timeout;
654 spin_lock(&adapter->lock);
656 do {
658 * has a DMA transfer finished?
660 if (inb_status(dev->base_addr) & DONE) {
661 if (!adapter->dmaing)
662 pr_warning("%s: phantom DMA completed\n", dev->name);
664 if (elp_debug >= 3)
665 pr_debug("%s: %s DMA complete, status %02x\n", dev->name,
666 adapter->current_dma.direction ? "tx" : "rx",
667 inb_status(dev->base_addr));
669 outb_control(adapter->hcr_val & ~(DMAE | TCEN | DIR), dev);
670 if (adapter->current_dma.direction) {
671 dev_kfree_skb_irq(adapter->current_dma.skb);
672 } else {
673 struct sk_buff *skb = adapter->current_dma.skb;
674 if (skb) {
675 if (adapter->current_dma.target) {
676 /* have already done the skb_put() */
677 memcpy(adapter->current_dma.target, adapter->dma_buffer, adapter->current_dma.length);
679 skb->protocol = eth_type_trans(skb,dev);
680 dev->stats.rx_bytes += skb->len;
681 netif_rx(skb);
684 adapter->dmaing = 0;
685 if (adapter->rx_backlog.in != adapter->rx_backlog.out) {
686 int t = adapter->rx_backlog.length[adapter->rx_backlog.out];
687 adapter->rx_backlog.out = backlog_next(adapter->rx_backlog.out);
688 if (elp_debug >= 2)
689 pr_debug("%s: receiving backlogged packet (%d)\n", dev->name, t);
690 receive_packet(dev, t);
691 } else {
692 adapter->busy = 0;
694 } else {
695 /* has one timed out? */
696 check_3c505_dma(dev);
700 * receive a PCB from the adapter
702 timeout = jiffies + 3*HZ/100;
703 while ((inb_status(dev->base_addr) & ACRF) != 0 && time_before(jiffies, timeout)) {
704 if (receive_pcb(dev, &adapter->irx_pcb)) {
705 switch (adapter->irx_pcb.command)
707 case 0:
708 break;
710 * received a packet - this must be handled fast
712 case 0xff:
713 case CMD_RECEIVE_PACKET_COMPLETE:
714 /* if the device isn't open, don't pass packets up the stack */
715 if (!netif_running(dev))
716 break;
717 len = adapter->irx_pcb.data.rcv_resp.pkt_len;
718 dlen = adapter->irx_pcb.data.rcv_resp.buf_len;
719 if (adapter->irx_pcb.data.rcv_resp.timeout != 0) {
720 pr_err("%s: interrupt - packet not received correctly\n", dev->name);
721 } else {
722 if (elp_debug >= 3) {
723 pr_debug("%s: interrupt - packet received of length %i (%i)\n",
724 dev->name, len, dlen);
726 if (adapter->irx_pcb.command == 0xff) {
727 if (elp_debug >= 2)
728 pr_debug("%s: adding packet to backlog (len = %d)\n",
729 dev->name, dlen);
730 adapter->rx_backlog.length[adapter->rx_backlog.in] = dlen;
731 adapter->rx_backlog.in = backlog_next(adapter->rx_backlog.in);
732 } else {
733 receive_packet(dev, dlen);
735 if (elp_debug >= 3)
736 pr_debug("%s: packet received\n", dev->name);
738 break;
741 * 82586 configured correctly
743 case CMD_CONFIGURE_82586_RESPONSE:
744 adapter->got[CMD_CONFIGURE_82586] = 1;
745 if (elp_debug >= 3)
746 pr_debug("%s: interrupt - configure response received\n", dev->name);
747 break;
750 * Adapter memory configuration
752 case CMD_CONFIGURE_ADAPTER_RESPONSE:
753 adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] = 1;
754 if (elp_debug >= 3)
755 pr_debug("%s: Adapter memory configuration %s.\n", dev->name,
756 adapter->irx_pcb.data.failed ? "failed" : "succeeded");
757 break;
760 * Multicast list loading
762 case CMD_LOAD_MULTICAST_RESPONSE:
763 adapter->got[CMD_LOAD_MULTICAST_LIST] = 1;
764 if (elp_debug >= 3)
765 pr_debug("%s: Multicast address list loading %s.\n", dev->name,
766 adapter->irx_pcb.data.failed ? "failed" : "succeeded");
767 break;
770 * Station address setting
772 case CMD_SET_ADDRESS_RESPONSE:
773 adapter->got[CMD_SET_STATION_ADDRESS] = 1;
774 if (elp_debug >= 3)
775 pr_debug("%s: Ethernet address setting %s.\n", dev->name,
776 adapter->irx_pcb.data.failed ? "failed" : "succeeded");
777 break;
781 * received board statistics
783 case CMD_NETWORK_STATISTICS_RESPONSE:
784 dev->stats.rx_packets += adapter->irx_pcb.data.netstat.tot_recv;
785 dev->stats.tx_packets += adapter->irx_pcb.data.netstat.tot_xmit;
786 dev->stats.rx_crc_errors += adapter->irx_pcb.data.netstat.err_CRC;
787 dev->stats.rx_frame_errors += adapter->irx_pcb.data.netstat.err_align;
788 dev->stats.rx_fifo_errors += adapter->irx_pcb.data.netstat.err_ovrrun;
789 dev->stats.rx_over_errors += adapter->irx_pcb.data.netstat.err_res;
790 adapter->got[CMD_NETWORK_STATISTICS] = 1;
791 if (elp_debug >= 3)
792 pr_debug("%s: interrupt - statistics response received\n", dev->name);
793 break;
796 * sent a packet
798 case CMD_TRANSMIT_PACKET_COMPLETE:
799 if (elp_debug >= 3)
800 pr_debug("%s: interrupt - packet sent\n", dev->name);
801 if (!netif_running(dev))
802 break;
803 switch (adapter->irx_pcb.data.xmit_resp.c_stat) {
804 case 0xffff:
805 dev->stats.tx_aborted_errors++;
806 pr_info("%s: transmit timed out, network cable problem?\n", dev->name);
807 break;
808 case 0xfffe:
809 dev->stats.tx_fifo_errors++;
810 pr_info("%s: transmit timed out, FIFO underrun\n", dev->name);
811 break;
813 netif_wake_queue(dev);
814 break;
817 * some unknown PCB
819 default:
820 pr_debug("%s: unknown PCB received - %2.2x\n",
821 dev->name, adapter->irx_pcb.command);
822 break;
824 } else {
825 pr_warning("%s: failed to read PCB on interrupt\n", dev->name);
826 adapter_reset(dev);
830 } while (icount++ < 5 && (inb_status(dev->base_addr) & (ACRF | DONE)));
832 prime_rx(dev);
835 * indicate no longer in interrupt routine
837 spin_unlock(&adapter->lock);
838 return IRQ_HANDLED;
842 /******************************************************
844 * open the board
846 ******************************************************/
848 static int elp_open(struct net_device *dev)
850 elp_device *adapter = netdev_priv(dev);
851 int retval;
853 if (elp_debug >= 3)
854 pr_debug("%s: request to open device\n", dev->name);
857 * make sure we actually found the device
859 if (adapter == NULL) {
860 pr_err("%s: Opening a non-existent physical device\n", dev->name);
861 return -EAGAIN;
864 * disable interrupts on the board
866 outb_control(0, dev);
869 * clear any pending interrupts
871 inb_command(dev->base_addr);
872 adapter_reset(dev);
875 * no receive PCBs active
877 adapter->rx_active = 0;
879 adapter->busy = 0;
880 adapter->send_pcb_semaphore = 0;
881 adapter->rx_backlog.in = 0;
882 adapter->rx_backlog.out = 0;
884 spin_lock_init(&adapter->lock);
887 * install our interrupt service routine
889 if ((retval = request_irq(dev->irq, elp_interrupt, 0, dev->name, dev))) {
890 pr_err("%s: could not allocate IRQ%d\n", dev->name, dev->irq);
891 return retval;
893 if ((retval = request_dma(dev->dma, dev->name))) {
894 free_irq(dev->irq, dev);
895 pr_err("%s: could not allocate DMA%d channel\n", dev->name, dev->dma);
896 return retval;
898 adapter->dma_buffer = (void *) dma_mem_alloc(DMA_BUFFER_SIZE);
899 if (!adapter->dma_buffer) {
900 pr_err("%s: could not allocate DMA buffer\n", dev->name);
901 free_dma(dev->dma);
902 free_irq(dev->irq, dev);
903 return -ENOMEM;
905 adapter->dmaing = 0;
908 * enable interrupts on the board
910 outb_control(CMDE, dev);
913 * configure adapter memory: we need 10 multicast addresses, default==0
915 if (elp_debug >= 3)
916 pr_debug("%s: sending 3c505 memory configuration command\n", dev->name);
917 adapter->tx_pcb.command = CMD_CONFIGURE_ADAPTER_MEMORY;
918 adapter->tx_pcb.data.memconf.cmd_q = 10;
919 adapter->tx_pcb.data.memconf.rcv_q = 20;
920 adapter->tx_pcb.data.memconf.mcast = 10;
921 adapter->tx_pcb.data.memconf.frame = 20;
922 adapter->tx_pcb.data.memconf.rcv_b = 20;
923 adapter->tx_pcb.data.memconf.progs = 0;
924 adapter->tx_pcb.length = sizeof(struct Memconf);
925 adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] = 0;
926 if (!send_pcb(dev, &adapter->tx_pcb))
927 pr_err("%s: couldn't send memory configuration command\n", dev->name);
928 else {
929 unsigned long timeout = jiffies + TIMEOUT;
930 while (adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] == 0 && time_before(jiffies, timeout));
931 if (time_after_eq(jiffies, timeout))
932 TIMEOUT_MSG(__LINE__);
937 * configure adapter to receive broadcast messages and wait for response
939 if (elp_debug >= 3)
940 pr_debug("%s: sending 82586 configure command\n", dev->name);
941 adapter->tx_pcb.command = CMD_CONFIGURE_82586;
942 adapter->tx_pcb.data.configure = NO_LOOPBACK | RECV_BROAD;
943 adapter->tx_pcb.length = 2;
944 adapter->got[CMD_CONFIGURE_82586] = 0;
945 if (!send_pcb(dev, &adapter->tx_pcb))
946 pr_err("%s: couldn't send 82586 configure command\n", dev->name);
947 else {
948 unsigned long timeout = jiffies + TIMEOUT;
949 while (adapter->got[CMD_CONFIGURE_82586] == 0 && time_before(jiffies, timeout));
950 if (time_after_eq(jiffies, timeout))
951 TIMEOUT_MSG(__LINE__);
954 /* enable burst-mode DMA */
955 /* outb(0x1, dev->base_addr + PORT_AUXDMA); */
958 * queue receive commands to provide buffering
960 prime_rx(dev);
961 if (elp_debug >= 3)
962 pr_debug("%s: %d receive PCBs active\n", dev->name, adapter->rx_active);
965 * device is now officially open!
968 netif_start_queue(dev);
969 return 0;
973 /******************************************************
975 * send a packet to the adapter
977 ******************************************************/
979 static netdev_tx_t send_packet(struct net_device *dev, struct sk_buff *skb)
981 elp_device *adapter = netdev_priv(dev);
982 unsigned long target;
983 unsigned long flags;
986 * make sure the length is even and no shorter than 60 bytes
988 unsigned int nlen = (((skb->len < 60) ? 60 : skb->len) + 1) & (~1);
990 if (test_and_set_bit(0, (void *) &adapter->busy)) {
991 if (elp_debug >= 2)
992 pr_debug("%s: transmit blocked\n", dev->name);
993 return false;
996 dev->stats.tx_bytes += nlen;
999 * send the adapter a transmit packet command. Ignore segment and offset
1000 * and make sure the length is even
1002 adapter->tx_pcb.command = CMD_TRANSMIT_PACKET;
1003 adapter->tx_pcb.length = sizeof(struct Xmit_pkt);
1004 adapter->tx_pcb.data.xmit_pkt.buf_ofs
1005 = adapter->tx_pcb.data.xmit_pkt.buf_seg = 0; /* Unused */
1006 adapter->tx_pcb.data.xmit_pkt.pkt_len = nlen;
1008 if (!send_pcb(dev, &adapter->tx_pcb)) {
1009 adapter->busy = 0;
1010 return false;
1012 /* if this happens, we die */
1013 if (test_and_set_bit(0, (void *) &adapter->dmaing))
1014 pr_debug("%s: tx: DMA %d in progress\n", dev->name, adapter->current_dma.direction);
1016 adapter->current_dma.direction = 1;
1017 adapter->current_dma.start_time = jiffies;
1019 if ((unsigned long)(skb->data + nlen) >= MAX_DMA_ADDRESS || nlen != skb->len) {
1020 skb_copy_from_linear_data(skb, adapter->dma_buffer, nlen);
1021 memset(adapter->dma_buffer+skb->len, 0, nlen-skb->len);
1022 target = isa_virt_to_bus(adapter->dma_buffer);
1024 else {
1025 target = isa_virt_to_bus(skb->data);
1027 adapter->current_dma.skb = skb;
1029 flags=claim_dma_lock();
1030 disable_dma(dev->dma);
1031 clear_dma_ff(dev->dma);
1032 set_dma_mode(dev->dma, 0x48); /* dma memory -> io */
1033 set_dma_addr(dev->dma, target);
1034 set_dma_count(dev->dma, nlen);
1035 outb_control(adapter->hcr_val | DMAE | TCEN, dev);
1036 enable_dma(dev->dma);
1037 release_dma_lock(flags);
1039 if (elp_debug >= 3)
1040 pr_debug("%s: DMA transfer started\n", dev->name);
1042 return true;
1046 * The upper layer thinks we timed out
1049 static void elp_timeout(struct net_device *dev)
1051 int stat;
1053 stat = inb_status(dev->base_addr);
1054 pr_warning("%s: transmit timed out, lost %s?\n", dev->name,
1055 (stat & ACRF) ? "interrupt" : "command");
1056 if (elp_debug >= 1)
1057 pr_debug("%s: status %#02x\n", dev->name, stat);
1058 dev->trans_start = jiffies; /* prevent tx timeout */
1059 dev->stats.tx_dropped++;
1060 netif_wake_queue(dev);
1063 /******************************************************
1065 * start the transmitter
1066 * return 0 if sent OK, else return 1
1068 ******************************************************/
1070 static netdev_tx_t elp_start_xmit(struct sk_buff *skb, struct net_device *dev)
1072 unsigned long flags;
1073 elp_device *adapter = netdev_priv(dev);
1075 spin_lock_irqsave(&adapter->lock, flags);
1076 check_3c505_dma(dev);
1078 if (elp_debug >= 3)
1079 pr_debug("%s: request to send packet of length %d\n", dev->name, (int) skb->len);
1081 netif_stop_queue(dev);
1084 * send the packet at skb->data for skb->len
1086 if (!send_packet(dev, skb)) {
1087 if (elp_debug >= 2) {
1088 pr_debug("%s: failed to transmit packet\n", dev->name);
1090 spin_unlock_irqrestore(&adapter->lock, flags);
1091 return NETDEV_TX_BUSY;
1093 if (elp_debug >= 3)
1094 pr_debug("%s: packet of length %d sent\n", dev->name, (int) skb->len);
1096 prime_rx(dev);
1097 spin_unlock_irqrestore(&adapter->lock, flags);
1098 netif_start_queue(dev);
1099 return NETDEV_TX_OK;
1102 /******************************************************
1104 * return statistics on the board
1106 ******************************************************/
1108 static struct net_device_stats *elp_get_stats(struct net_device *dev)
1110 elp_device *adapter = netdev_priv(dev);
1112 if (elp_debug >= 3)
1113 pr_debug("%s: request for stats\n", dev->name);
1115 /* If the device is closed, just return the latest stats we have,
1116 - we cannot ask from the adapter without interrupts */
1117 if (!netif_running(dev))
1118 return &dev->stats;
1120 /* send a get statistics command to the board */
1121 adapter->tx_pcb.command = CMD_NETWORK_STATISTICS;
1122 adapter->tx_pcb.length = 0;
1123 adapter->got[CMD_NETWORK_STATISTICS] = 0;
1124 if (!send_pcb(dev, &adapter->tx_pcb))
1125 pr_err("%s: couldn't send get statistics command\n", dev->name);
1126 else {
1127 unsigned long timeout = jiffies + TIMEOUT;
1128 while (adapter->got[CMD_NETWORK_STATISTICS] == 0 && time_before(jiffies, timeout));
1129 if (time_after_eq(jiffies, timeout)) {
1130 TIMEOUT_MSG(__LINE__);
1131 return &dev->stats;
1135 /* statistics are now up to date */
1136 return &dev->stats;
1140 static void netdev_get_drvinfo(struct net_device *dev,
1141 struct ethtool_drvinfo *info)
1143 strcpy(info->driver, DRV_NAME);
1144 strcpy(info->version, DRV_VERSION);
1145 sprintf(info->bus_info, "ISA 0x%lx", dev->base_addr);
1148 static u32 netdev_get_msglevel(struct net_device *dev)
1150 return debug;
1153 static void netdev_set_msglevel(struct net_device *dev, u32 level)
1155 debug = level;
1158 static const struct ethtool_ops netdev_ethtool_ops = {
1159 .get_drvinfo = netdev_get_drvinfo,
1160 .get_msglevel = netdev_get_msglevel,
1161 .set_msglevel = netdev_set_msglevel,
1164 /******************************************************
1166 * close the board
1168 ******************************************************/
1170 static int elp_close(struct net_device *dev)
1172 elp_device *adapter = netdev_priv(dev);
1174 if (elp_debug >= 3)
1175 pr_debug("%s: request to close device\n", dev->name);
1177 netif_stop_queue(dev);
1179 /* Someone may request the device statistic information even when
1180 * the interface is closed. The following will update the statistics
1181 * structure in the driver, so we'll be able to give current statistics.
1183 (void) elp_get_stats(dev);
1186 * disable interrupts on the board
1188 outb_control(0, dev);
1191 * release the IRQ
1193 free_irq(dev->irq, dev);
1195 free_dma(dev->dma);
1196 free_pages((unsigned long) adapter->dma_buffer, get_order(DMA_BUFFER_SIZE));
1198 return 0;
1202 /************************************************************
1204 * Set multicast list
1205 * num_addrs==0: clear mc_list
1206 * num_addrs==-1: set promiscuous mode
1207 * num_addrs>0: set mc_list
1209 ************************************************************/
1211 static void elp_set_mc_list(struct net_device *dev)
1213 elp_device *adapter = netdev_priv(dev);
1214 struct netdev_hw_addr *ha;
1215 int i;
1216 unsigned long flags;
1218 if (elp_debug >= 3)
1219 pr_debug("%s: request to set multicast list\n", dev->name);
1221 spin_lock_irqsave(&adapter->lock, flags);
1223 if (!(dev->flags & (IFF_PROMISC | IFF_ALLMULTI))) {
1224 /* send a "load multicast list" command to the board, max 10 addrs/cmd */
1225 /* if num_addrs==0 the list will be cleared */
1226 adapter->tx_pcb.command = CMD_LOAD_MULTICAST_LIST;
1227 adapter->tx_pcb.length = 6 * netdev_mc_count(dev);
1228 i = 0;
1229 netdev_for_each_mc_addr(ha, dev)
1230 memcpy(adapter->tx_pcb.data.multicast[i++],
1231 ha->addr, 6);
1232 adapter->got[CMD_LOAD_MULTICAST_LIST] = 0;
1233 if (!send_pcb(dev, &adapter->tx_pcb))
1234 pr_err("%s: couldn't send set_multicast command\n", dev->name);
1235 else {
1236 unsigned long timeout = jiffies + TIMEOUT;
1237 while (adapter->got[CMD_LOAD_MULTICAST_LIST] == 0 && time_before(jiffies, timeout));
1238 if (time_after_eq(jiffies, timeout)) {
1239 TIMEOUT_MSG(__LINE__);
1242 if (!netdev_mc_empty(dev))
1243 adapter->tx_pcb.data.configure = NO_LOOPBACK | RECV_BROAD | RECV_MULTI;
1244 else /* num_addrs == 0 */
1245 adapter->tx_pcb.data.configure = NO_LOOPBACK | RECV_BROAD;
1246 } else
1247 adapter->tx_pcb.data.configure = NO_LOOPBACK | RECV_PROMISC;
1249 * configure adapter to receive messages (as specified above)
1250 * and wait for response
1252 if (elp_debug >= 3)
1253 pr_debug("%s: sending 82586 configure command\n", dev->name);
1254 adapter->tx_pcb.command = CMD_CONFIGURE_82586;
1255 adapter->tx_pcb.length = 2;
1256 adapter->got[CMD_CONFIGURE_82586] = 0;
1257 if (!send_pcb(dev, &adapter->tx_pcb))
1259 spin_unlock_irqrestore(&adapter->lock, flags);
1260 pr_err("%s: couldn't send 82586 configure command\n", dev->name);
1262 else {
1263 unsigned long timeout = jiffies + TIMEOUT;
1264 spin_unlock_irqrestore(&adapter->lock, flags);
1265 while (adapter->got[CMD_CONFIGURE_82586] == 0 && time_before(jiffies, timeout));
1266 if (time_after_eq(jiffies, timeout))
1267 TIMEOUT_MSG(__LINE__);
1271 /************************************************************
1273 * A couple of tests to see if there's 3C505 or not
1274 * Called only by elp_autodetect
1275 ************************************************************/
1277 static int __init elp_sense(struct net_device *dev)
1279 int addr = dev->base_addr;
1280 const char *name = dev->name;
1281 byte orig_HSR;
1283 if (!request_region(addr, ELP_IO_EXTENT, "3c505"))
1284 return -ENODEV;
1286 orig_HSR = inb_status(addr);
1288 if (elp_debug > 0)
1289 pr_debug(search_msg, name, addr);
1291 if (orig_HSR == 0xff) {
1292 if (elp_debug > 0)
1293 pr_cont(notfound_msg, 1);
1294 goto out;
1297 /* Wait for a while; the adapter may still be booting up */
1298 if (elp_debug > 0)
1299 pr_cont(stilllooking_msg);
1301 if (orig_HSR & DIR) {
1302 /* If HCR.DIR is up, we pull it down. HSR.DIR should follow. */
1303 outb(0, dev->base_addr + PORT_CONTROL);
1304 msleep(300);
1305 if (inb_status(addr) & DIR) {
1306 if (elp_debug > 0)
1307 pr_cont(notfound_msg, 2);
1308 goto out;
1310 } else {
1311 /* If HCR.DIR is down, we pull it up. HSR.DIR should follow. */
1312 outb(DIR, dev->base_addr + PORT_CONTROL);
1313 msleep(300);
1314 if (!(inb_status(addr) & DIR)) {
1315 if (elp_debug > 0)
1316 pr_cont(notfound_msg, 3);
1317 goto out;
1321 * It certainly looks like a 3c505.
1323 if (elp_debug > 0)
1324 pr_cont(found_msg);
1326 return 0;
1327 out:
1328 release_region(addr, ELP_IO_EXTENT);
1329 return -ENODEV;
1332 /*************************************************************
1334 * Search through addr_list[] and try to find a 3C505
1335 * Called only by eplus_probe
1336 *************************************************************/
1338 static int __init elp_autodetect(struct net_device *dev)
1340 int idx = 0;
1342 /* if base address set, then only check that address
1343 otherwise, run through the table */
1344 if (dev->base_addr != 0) { /* dev->base_addr == 0 ==> plain autodetect */
1345 if (elp_sense(dev) == 0)
1346 return dev->base_addr;
1347 } else
1348 while ((dev->base_addr = addr_list[idx++])) {
1349 if (elp_sense(dev) == 0)
1350 return dev->base_addr;
1353 /* could not find an adapter */
1354 if (elp_debug > 0)
1355 pr_debug(couldnot_msg, dev->name);
1357 return 0; /* Because of this, the layer above will return -ENODEV */
1360 static const struct net_device_ops elp_netdev_ops = {
1361 .ndo_open = elp_open,
1362 .ndo_stop = elp_close,
1363 .ndo_get_stats = elp_get_stats,
1364 .ndo_start_xmit = elp_start_xmit,
1365 .ndo_tx_timeout = elp_timeout,
1366 .ndo_set_multicast_list = elp_set_mc_list,
1367 .ndo_change_mtu = eth_change_mtu,
1368 .ndo_set_mac_address = eth_mac_addr,
1369 .ndo_validate_addr = eth_validate_addr,
1372 /******************************************************
1374 * probe for an Etherlink Plus board at the specified address
1376 ******************************************************/
1378 /* There are three situations we need to be able to detect here:
1380 * a) the card is idle
1381 * b) the card is still booting up
1382 * c) the card is stuck in a strange state (some DOS drivers do this)
1384 * In case (a), all is well. In case (b), we wait 10 seconds to see if the
1385 * card finishes booting, and carry on if so. In case (c), we do a hard reset,
1386 * loop round, and hope for the best.
1388 * This is all very unpleasant, but hopefully avoids the problems with the old
1389 * probe code (which had a 15-second delay if the card was idle, and didn't
1390 * work at all if it was in a weird state).
1393 static int __init elplus_setup(struct net_device *dev)
1395 elp_device *adapter = netdev_priv(dev);
1396 int i, tries, tries1, okay;
1397 unsigned long timeout;
1398 unsigned long cookie = 0;
1399 int err = -ENODEV;
1402 * setup adapter structure
1405 dev->base_addr = elp_autodetect(dev);
1406 if (!dev->base_addr)
1407 return -ENODEV;
1409 adapter->send_pcb_semaphore = 0;
1411 for (tries1 = 0; tries1 < 3; tries1++) {
1412 outb_control((adapter->hcr_val | CMDE) & ~DIR, dev);
1413 /* First try to write just one byte, to see if the card is
1414 * responding at all normally.
1416 timeout = jiffies + 5*HZ/100;
1417 okay = 0;
1418 while (time_before(jiffies, timeout) && !(inb_status(dev->base_addr) & HCRE));
1419 if ((inb_status(dev->base_addr) & HCRE)) {
1420 outb_command(0, dev->base_addr); /* send a spurious byte */
1421 timeout = jiffies + 5*HZ/100;
1422 while (time_before(jiffies, timeout) && !(inb_status(dev->base_addr) & HCRE));
1423 if (inb_status(dev->base_addr) & HCRE)
1424 okay = 1;
1426 if (!okay) {
1427 /* Nope, it's ignoring the command register. This means that
1428 * either it's still booting up, or it's died.
1430 pr_err("%s: command register wouldn't drain, ", dev->name);
1431 if ((inb_status(dev->base_addr) & 7) == 3) {
1432 /* If the adapter status is 3, it *could* still be booting.
1433 * Give it the benefit of the doubt for 10 seconds.
1435 pr_cont("assuming 3c505 still starting\n");
1436 timeout = jiffies + 10*HZ;
1437 while (time_before(jiffies, timeout) && (inb_status(dev->base_addr) & 7));
1438 if (inb_status(dev->base_addr) & 7) {
1439 pr_err("%s: 3c505 failed to start\n", dev->name);
1440 } else {
1441 okay = 1; /* It started */
1443 } else {
1444 /* Otherwise, it must just be in a strange
1445 * state. We probably need to kick it.
1447 pr_cont("3c505 is sulking\n");
1450 for (tries = 0; tries < 5 && okay; tries++) {
1453 * Try to set the Ethernet address, to make sure that the board
1454 * is working.
1456 adapter->tx_pcb.command = CMD_STATION_ADDRESS;
1457 adapter->tx_pcb.length = 0;
1458 cookie = probe_irq_on();
1459 if (!send_pcb(dev, &adapter->tx_pcb)) {
1460 pr_err("%s: could not send first PCB\n", dev->name);
1461 probe_irq_off(cookie);
1462 continue;
1464 if (!receive_pcb(dev, &adapter->rx_pcb)) {
1465 pr_err("%s: could not read first PCB\n", dev->name);
1466 probe_irq_off(cookie);
1467 continue;
1469 if ((adapter->rx_pcb.command != CMD_ADDRESS_RESPONSE) ||
1470 (adapter->rx_pcb.length != 6)) {
1471 pr_err("%s: first PCB wrong (%d, %d)\n", dev->name,
1472 adapter->rx_pcb.command, adapter->rx_pcb.length);
1473 probe_irq_off(cookie);
1474 continue;
1476 goto okay;
1478 /* It's broken. Do a hard reset to re-initialise the board,
1479 * and try again.
1481 pr_info("%s: resetting adapter\n", dev->name);
1482 outb_control(adapter->hcr_val | FLSH | ATTN, dev);
1483 outb_control(adapter->hcr_val & ~(FLSH | ATTN), dev);
1485 pr_err("%s: failed to initialise 3c505\n", dev->name);
1486 goto out;
1488 okay:
1489 if (dev->irq) { /* Is there a preset IRQ? */
1490 int rpt = probe_irq_off(cookie);
1491 if (dev->irq != rpt) {
1492 pr_warning("%s: warning, irq %d configured but %d detected\n", dev->name, dev->irq, rpt);
1494 /* if dev->irq == probe_irq_off(cookie), all is well */
1495 } else /* No preset IRQ; just use what we can detect */
1496 dev->irq = probe_irq_off(cookie);
1497 switch (dev->irq) { /* Legal, sane? */
1498 case 0:
1499 pr_err("%s: IRQ probe failed: check 3c505 jumpers.\n",
1500 dev->name);
1501 goto out;
1502 case 1:
1503 case 6:
1504 case 8:
1505 case 13:
1506 pr_err("%s: Impossible IRQ %d reported by probe_irq_off().\n",
1507 dev->name, dev->irq);
1508 goto out;
1511 * Now we have the IRQ number so we can disable the interrupts from
1512 * the board until the board is opened.
1514 outb_control(adapter->hcr_val & ~CMDE, dev);
1517 * copy Ethernet address into structure
1519 for (i = 0; i < 6; i++)
1520 dev->dev_addr[i] = adapter->rx_pcb.data.eth_addr[i];
1522 /* find a DMA channel */
1523 if (!dev->dma) {
1524 if (dev->mem_start) {
1525 dev->dma = dev->mem_start & 7;
1527 else {
1528 pr_warning("%s: warning, DMA channel not specified, using default\n", dev->name);
1529 dev->dma = ELP_DMA;
1534 * print remainder of startup message
1536 pr_info("%s: 3c505 at %#lx, irq %d, dma %d, addr %pM, ",
1537 dev->name, dev->base_addr, dev->irq, dev->dma, dev->dev_addr);
1539 * read more information from the adapter
1542 adapter->tx_pcb.command = CMD_ADAPTER_INFO;
1543 adapter->tx_pcb.length = 0;
1544 if (!send_pcb(dev, &adapter->tx_pcb) ||
1545 !receive_pcb(dev, &adapter->rx_pcb) ||
1546 (adapter->rx_pcb.command != CMD_ADAPTER_INFO_RESPONSE) ||
1547 (adapter->rx_pcb.length != 10)) {
1548 pr_cont("not responding to second PCB\n");
1550 pr_cont("rev %d.%d, %dk\n", adapter->rx_pcb.data.info.major_vers,
1551 adapter->rx_pcb.data.info.minor_vers, adapter->rx_pcb.data.info.RAM_sz);
1554 * reconfigure the adapter memory to better suit our purposes
1556 adapter->tx_pcb.command = CMD_CONFIGURE_ADAPTER_MEMORY;
1557 adapter->tx_pcb.length = 12;
1558 adapter->tx_pcb.data.memconf.cmd_q = 8;
1559 adapter->tx_pcb.data.memconf.rcv_q = 8;
1560 adapter->tx_pcb.data.memconf.mcast = 10;
1561 adapter->tx_pcb.data.memconf.frame = 10;
1562 adapter->tx_pcb.data.memconf.rcv_b = 10;
1563 adapter->tx_pcb.data.memconf.progs = 0;
1564 if (!send_pcb(dev, &adapter->tx_pcb) ||
1565 !receive_pcb(dev, &adapter->rx_pcb) ||
1566 (adapter->rx_pcb.command != CMD_CONFIGURE_ADAPTER_RESPONSE) ||
1567 (adapter->rx_pcb.length != 2)) {
1568 pr_err("%s: could not configure adapter memory\n", dev->name);
1570 if (adapter->rx_pcb.data.configure) {
1571 pr_err("%s: adapter configuration failed\n", dev->name);
1574 dev->netdev_ops = &elp_netdev_ops;
1575 dev->watchdog_timeo = 10*HZ;
1576 dev->ethtool_ops = &netdev_ethtool_ops; /* local */
1578 dev->mem_start = dev->mem_end = 0;
1580 err = register_netdev(dev);
1581 if (err)
1582 goto out;
1584 return 0;
1585 out:
1586 release_region(dev->base_addr, ELP_IO_EXTENT);
1587 return err;
1590 #ifndef MODULE
1591 struct net_device * __init elplus_probe(int unit)
1593 struct net_device *dev = alloc_etherdev(sizeof(elp_device));
1594 int err;
1595 if (!dev)
1596 return ERR_PTR(-ENOMEM);
1598 sprintf(dev->name, "eth%d", unit);
1599 netdev_boot_setup_check(dev);
1601 err = elplus_setup(dev);
1602 if (err) {
1603 free_netdev(dev);
1604 return ERR_PTR(err);
1606 return dev;
1609 #else
1610 static struct net_device *dev_3c505[ELP_MAX_CARDS];
1611 static int io[ELP_MAX_CARDS];
1612 static int irq[ELP_MAX_CARDS];
1613 static int dma[ELP_MAX_CARDS];
1614 module_param_array(io, int, NULL, 0);
1615 module_param_array(irq, int, NULL, 0);
1616 module_param_array(dma, int, NULL, 0);
1617 MODULE_PARM_DESC(io, "EtherLink Plus I/O base address(es)");
1618 MODULE_PARM_DESC(irq, "EtherLink Plus IRQ number(s) (assigned)");
1619 MODULE_PARM_DESC(dma, "EtherLink Plus DMA channel(s)");
1621 int __init init_module(void)
1623 int this_dev, found = 0;
1625 for (this_dev = 0; this_dev < ELP_MAX_CARDS; this_dev++) {
1626 struct net_device *dev = alloc_etherdev(sizeof(elp_device));
1627 if (!dev)
1628 break;
1630 dev->irq = irq[this_dev];
1631 dev->base_addr = io[this_dev];
1632 if (dma[this_dev]) {
1633 dev->dma = dma[this_dev];
1634 } else {
1635 dev->dma = ELP_DMA;
1636 pr_warning("3c505.c: warning, using default DMA channel,\n");
1638 if (io[this_dev] == 0) {
1639 if (this_dev) {
1640 free_netdev(dev);
1641 break;
1643 pr_notice("3c505.c: module autoprobe not recommended, give io=xx.\n");
1645 if (elplus_setup(dev) != 0) {
1646 pr_warning("3c505.c: Failed to register card at 0x%x.\n", io[this_dev]);
1647 free_netdev(dev);
1648 break;
1650 dev_3c505[this_dev] = dev;
1651 found++;
1653 if (!found)
1654 return -ENODEV;
1655 return 0;
1658 void __exit cleanup_module(void)
1660 int this_dev;
1662 for (this_dev = 0; this_dev < ELP_MAX_CARDS; this_dev++) {
1663 struct net_device *dev = dev_3c505[this_dev];
1664 if (dev) {
1665 unregister_netdev(dev);
1666 release_region(dev->base_addr, ELP_IO_EXTENT);
1667 free_netdev(dev);
1672 #endif /* MODULE */
1673 MODULE_LICENSE("GPL");