?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Merge branch 'for-linus' of git://git.infradead.org/users/sameo/mfd-2.6
[linux-btrfs-devel.git] / drivers / net / tulip / interrupt.c
blob5350d753e0fff0c4a089ea091ca5f5121acc6330
1 /*
2 drivers/net/tulip/interrupt.c
3
4 Copyright 2000,2001 The Linux Kernel Team
5 Written/copyright 1994-2001 by Donald Becker.
6
7 This software may be used and distributed according to the terms
8 of the GNU General Public License, incorporated herein by reference.
9
10 Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
11 for more information on this driver.
12 Please submit bugs to http://bugzilla.kernel.org/ .
13
14 */
15
16 #include <linux/pci.h>
17 #include "tulip.h"
18 #include <linux/etherdevice.h>
19
20 int tulip_rx_copybreak;
21 unsigned int tulip_max_interrupt_work;
22
23 #ifdef CONFIG_TULIP_NAPI_HW_MITIGATION
24 #define MIT_SIZE 15
25 #define MIT_TABLE 15 /* We use 0 or max */
26
27 static unsigned int mit_table[MIT_SIZE+1] =
28 {
29 /* CRS11 21143 hardware Mitigation Control Interrupt
30 We use only RX mitigation we other techniques for
31 TX intr. mitigation.
32
33 31 Cycle Size (timer control)
34 30:27 TX timer in 16 * Cycle size
35 26:24 TX No pkts before Int.
36 23:20 RX timer in Cycle size
37 19:17 RX No pkts before Int.
38 16 Continues Mode (CM)
39 */
40
41 0x0, /* IM disabled */
42 0x80150000, /* RX time = 1, RX pkts = 2, CM = 1 */
43 0x80150000,
44 0x80270000,
45 0x80370000,
46 0x80490000,
47 0x80590000,
48 0x80690000,
49 0x807B0000,
50 0x808B0000,
51 0x809D0000,
52 0x80AD0000,
53 0x80BD0000,
54 0x80CF0000,
55 0x80DF0000,
56 // 0x80FF0000 /* RX time = 16, RX pkts = 7, CM = 1 */
57 0x80F10000 /* RX time = 16, RX pkts = 0, CM = 1 */
58 };
59 #endif
60
61
62 int tulip_refill_rx(struct net_device *dev)
63 {
64 struct tulip_private *tp = netdev_priv(dev);
65 int entry;
66 int refilled = 0;
67
68 /* Refill the Rx ring buffers. */
69 for (; tp->cur_rx - tp->dirty_rx > 0; tp->dirty_rx++) {
70 entry = tp->dirty_rx % RX_RING_SIZE;
71 if (tp->rx_buffers[entry].skb == NULL) {
72 struct sk_buff *skb;
73 dma_addr_t mapping;
74
75 skb = tp->rx_buffers[entry].skb = dev_alloc_skb(PKT_BUF_SZ);
76 if (skb == NULL)
77 break;
78
79 mapping = pci_map_single(tp->pdev, skb->data, PKT_BUF_SZ,
80 PCI_DMA_FROMDEVICE);
81 tp->rx_buffers[entry].mapping = mapping;
82
83 skb->dev = dev; /* Mark as being used by this device. */
84 tp->rx_ring[entry].buffer1 = cpu_to_le32(mapping);
85 refilled++;
86 }
87 tp->rx_ring[entry].status = cpu_to_le32(DescOwned);
88 }
89 if(tp->chip_id == LC82C168) {
90 if(((ioread32(tp->base_addr + CSR5)>>17)&0x07) == 4) {
91 /* Rx stopped due to out of buffers,
92 * restart it
93 */
94 iowrite32(0x01, tp->base_addr + CSR2);
95 }
96 }
97 return refilled;
98 }
99
100 #ifdef CONFIG_TULIP_NAPI
101
102 void oom_timer(unsigned long data)
103 {
104 struct net_device *dev = (struct net_device *)data;
105 struct tulip_private *tp = netdev_priv(dev);
106 napi_schedule(&tp->napi);
107 }
108
109 int tulip_poll(struct napi_struct *napi, int budget)
110 {
111 struct tulip_private *tp = container_of(napi, struct tulip_private, napi);
112 struct net_device *dev = tp->dev;
113 int entry = tp->cur_rx % RX_RING_SIZE;
114 int work_done = 0;
115 #ifdef CONFIG_TULIP_NAPI_HW_MITIGATION
116 int received = 0;
117 #endif
118
119 #ifdef CONFIG_TULIP_NAPI_HW_MITIGATION
120
121 /* that one buffer is needed for mit activation; or might be a
122 bug in the ring buffer code; check later -- JHS*/
123
124 if (budget >=RX_RING_SIZE) budget--;
125 #endif
126
127 if (tulip_debug > 4)
128 netdev_dbg(dev, " In tulip_rx(), entry %d %08x\n",
129 entry, tp->rx_ring[entry].status);
130
131 do {
132 if (ioread32(tp->base_addr + CSR5) == 0xffffffff) {
133 netdev_dbg(dev, " In tulip_poll(), hardware disappeared\n");
134 break;
135 }
136 /* Acknowledge current RX interrupt sources. */
137 iowrite32((RxIntr | RxNoBuf), tp->base_addr + CSR5);
138
139
140 /* If we own the next entry, it is a new packet. Send it up. */
141 while ( ! (tp->rx_ring[entry].status & cpu_to_le32(DescOwned))) {
142 s32 status = le32_to_cpu(tp->rx_ring[entry].status);
143 short pkt_len;
144
145 if (tp->dirty_rx + RX_RING_SIZE == tp->cur_rx)
146 break;
147
148 if (tulip_debug > 5)
149 netdev_dbg(dev, "In tulip_rx(), entry %d %08x\n",
150 entry, status);
151
152 if (++work_done >= budget)
153 goto not_done;
154
155 /*
156 * Omit the four octet CRC from the length.
157 * (May not be considered valid until we have
158 * checked status for RxLengthOver2047 bits)
159 */
160 pkt_len = ((status >> 16) & 0x7ff) - 4;
161
162 /*
163 * Maximum pkt_len is 1518 (1514 + vlan header)
164 * Anything higher than this is always invalid
165 * regardless of RxLengthOver2047 bits
166 */
167
168 if ((status & (RxLengthOver2047 |
169 RxDescCRCError |
170 RxDescCollisionSeen |
171 RxDescRunt |
172 RxDescDescErr |
173 RxWholePkt)) != RxWholePkt ||
174 pkt_len > 1518) {
175 if ((status & (RxLengthOver2047 |
176 RxWholePkt)) != RxWholePkt) {
177 /* Ingore earlier buffers. */
178 if ((status & 0xffff) != 0x7fff) {
179 if (tulip_debug > 1)
180 dev_warn(&dev->dev,
181 "Oversized Ethernet frame spanned multiple buffers, status %08x!\n",
182 status);
183 dev->stats.rx_length_errors++;
184 }
185 } else {
186 /* There was a fatal error. */
187 if (tulip_debug > 2)
188 netdev_dbg(dev, "Receive error, Rx status %08x\n",
189 status);
190 dev->stats.rx_errors++; /* end of a packet.*/
191 if (pkt_len > 1518 ||
192 (status & RxDescRunt))
193 dev->stats.rx_length_errors++;
194
195 if (status & 0x0004)
196 dev->stats.rx_frame_errors++;
197 if (status & 0x0002)
198 dev->stats.rx_crc_errors++;
199 if (status & 0x0001)
200 dev->stats.rx_fifo_errors++;
201 }
202 } else {
203 struct sk_buff *skb;
204
205 /* Check if the packet is long enough to accept without copying
206 to a minimally-sized skbuff. */
207 if (pkt_len < tulip_rx_copybreak &&
208 (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
209 skb_reserve(skb, 2); /* 16 byte align the IP header */
210 pci_dma_sync_single_for_cpu(tp->pdev,
211 tp->rx_buffers[entry].mapping,
212 pkt_len, PCI_DMA_FROMDEVICE);
213 #if ! defined(__alpha__)
214 skb_copy_to_linear_data(skb, tp->rx_buffers[entry].skb->data,
215 pkt_len);
216 skb_put(skb, pkt_len);
217 #else
218 memcpy(skb_put(skb, pkt_len),
219 tp->rx_buffers[entry].skb->data,
220 pkt_len);
221 #endif
222 pci_dma_sync_single_for_device(tp->pdev,
223 tp->rx_buffers[entry].mapping,
224 pkt_len, PCI_DMA_FROMDEVICE);
225 } else { /* Pass up the skb already on the Rx ring. */
226 char *temp = skb_put(skb = tp->rx_buffers[entry].skb,
227 pkt_len);
228
229 #ifndef final_version
230 if (tp->rx_buffers[entry].mapping !=
231 le32_to_cpu(tp->rx_ring[entry].buffer1)) {
232 dev_err(&dev->dev,
233 "Internal fault: The skbuff addresses do not match in tulip_rx: %08x vs. %08llx %p / %p\n",
234 le32_to_cpu(tp->rx_ring[entry].buffer1),
235 (unsigned long long)tp->rx_buffers[entry].mapping,
236 skb->head, temp);
237 }
238 #endif
239
240 pci_unmap_single(tp->pdev, tp->rx_buffers[entry].mapping,
241 PKT_BUF_SZ, PCI_DMA_FROMDEVICE);
242
243 tp->rx_buffers[entry].skb = NULL;
244 tp->rx_buffers[entry].mapping = 0;
245 }
246 skb->protocol = eth_type_trans(skb, dev);
247
248 netif_receive_skb(skb);
249
250 dev->stats.rx_packets++;
251 dev->stats.rx_bytes += pkt_len;
252 }
253 #ifdef CONFIG_TULIP_NAPI_HW_MITIGATION
254 received++;
255 #endif
256
257 entry = (++tp->cur_rx) % RX_RING_SIZE;
258 if (tp->cur_rx - tp->dirty_rx > RX_RING_SIZE/4)
259 tulip_refill_rx(dev);
260
261 }
262
263 /* New ack strategy... irq does not ack Rx any longer
264 hopefully this helps */
265
266 /* Really bad things can happen here... If new packet arrives
267 * and an irq arrives (tx or just due to occasionally unset
268 * mask), it will be acked by irq handler, but new thread
269 * is not scheduled. It is major hole in design.
270 * No idea how to fix this if "playing with fire" will fail
271 * tomorrow (night 011029). If it will not fail, we won
272 * finally: amount of IO did not increase at all. */
273 } while ((ioread32(tp->base_addr + CSR5) & RxIntr));
274
275 #ifdef CONFIG_TULIP_NAPI_HW_MITIGATION
276
277 /* We use this simplistic scheme for IM. It's proven by
278 real life installations. We can have IM enabled
279 continuesly but this would cause unnecessary latency.
280 Unfortunely we can't use all the NET_RX_* feedback here.
281 This would turn on IM for devices that is not contributing
282 to backlog congestion with unnecessary latency.
283
284 We monitor the device RX-ring and have:
285
286 HW Interrupt Mitigation either ON or OFF.
287
288 ON: More then 1 pkt received (per intr.) OR we are dropping
289 OFF: Only 1 pkt received
290
291 Note. We only use min and max (0, 15) settings from mit_table */
292
293
294 if( tp->flags & HAS_INTR_MITIGATION) {
295 if( received > 1 ) {
296 if( ! tp->mit_on ) {
297 tp->mit_on = 1;
298 iowrite32(mit_table[MIT_TABLE], tp->base_addr + CSR11);
299 }
300 }
301 else {
302 if( tp->mit_on ) {
303 tp->mit_on = 0;
304 iowrite32(0, tp->base_addr + CSR11);
305 }
306 }
307 }
308
309 #endif /* CONFIG_TULIP_NAPI_HW_MITIGATION */
310
311 tulip_refill_rx(dev);
312
313 /* If RX ring is not full we are out of memory. */
314 if (tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL)
315 goto oom;
316
317 /* Remove us from polling list and enable RX intr. */
318
319 napi_complete(napi);
320 iowrite32(tulip_tbl[tp->chip_id].valid_intrs, tp->base_addr+CSR7);
321
322 /* The last op happens after poll completion. Which means the following:
323 * 1. it can race with disabling irqs in irq handler
324 * 2. it can race with dise/enabling irqs in other poll threads
325 * 3. if an irq raised after beginning loop, it will be immediately
326 * triggered here.
327 *
328 * Summarizing: the logic results in some redundant irqs both
329 * due to races in masking and due to too late acking of already
330 * processed irqs. But it must not result in losing events.
331 */
332
333 return work_done;
334
335 not_done:
336 if (tp->cur_rx - tp->dirty_rx > RX_RING_SIZE/2 ||
337 tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL)
338 tulip_refill_rx(dev);
339
340 if (tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL)
341 goto oom;
342
343 return work_done;
344
345 oom: /* Executed with RX ints disabled */
346
347 /* Start timer, stop polling, but do not enable rx interrupts. */
348 mod_timer(&tp->oom_timer, jiffies+1);
349
350 /* Think: timer_pending() was an explicit signature of bug.
351 * Timer can be pending now but fired and completed
352 * before we did napi_complete(). See? We would lose it. */
353
354 /* remove ourselves from the polling list */
355 napi_complete(napi);
356
357 return work_done;
358 }
359
360 #else /* CONFIG_TULIP_NAPI */
361
362 static int tulip_rx(struct net_device *dev)
363 {
364 struct tulip_private *tp = netdev_priv(dev);
365 int entry = tp->cur_rx % RX_RING_SIZE;
366 int rx_work_limit = tp->dirty_rx + RX_RING_SIZE - tp->cur_rx;
367 int received = 0;
368
369 if (tulip_debug > 4)
370 netdev_dbg(dev, "In tulip_rx(), entry %d %08x\n",
371 entry, tp->rx_ring[entry].status);
372 /* If we own the next entry, it is a new packet. Send it up. */
373 while ( ! (tp->rx_ring[entry].status & cpu_to_le32(DescOwned))) {
374 s32 status = le32_to_cpu(tp->rx_ring[entry].status);
375 short pkt_len;
376
377 if (tulip_debug > 5)
378 netdev_dbg(dev, "In tulip_rx(), entry %d %08x\n",
379 entry, status);
380 if (--rx_work_limit < 0)
381 break;
382
383 /*
384 Omit the four octet CRC from the length.
385 (May not be considered valid until we have
386 checked status for RxLengthOver2047 bits)
387 */
388 pkt_len = ((status >> 16) & 0x7ff) - 4;
389 /*
390 Maximum pkt_len is 1518 (1514 + vlan header)
391 Anything higher than this is always invalid
392 regardless of RxLengthOver2047 bits
393 */
394
395 if ((status & (RxLengthOver2047 |
396 RxDescCRCError |
397 RxDescCollisionSeen |
398 RxDescRunt |
399 RxDescDescErr |
400 RxWholePkt)) != RxWholePkt ||
401 pkt_len > 1518) {
402 if ((status & (RxLengthOver2047 |
403 RxWholePkt)) != RxWholePkt) {
404 /* Ingore earlier buffers. */
405 if ((status & 0xffff) != 0x7fff) {
406 if (tulip_debug > 1)
407 netdev_warn(dev,
408 "Oversized Ethernet frame spanned multiple buffers, status %08x!\n",
409 status);
410 dev->stats.rx_length_errors++;
411 }
412 } else {
413 /* There was a fatal error. */
414 if (tulip_debug > 2)
415 netdev_dbg(dev, "Receive error, Rx status %08x\n",
416 status);
417 dev->stats.rx_errors++; /* end of a packet.*/
418 if (pkt_len > 1518 ||
419 (status & RxDescRunt))
420 dev->stats.rx_length_errors++;
421 if (status & 0x0004)
422 dev->stats.rx_frame_errors++;
423 if (status & 0x0002)
424 dev->stats.rx_crc_errors++;
425 if (status & 0x0001)
426 dev->stats.rx_fifo_errors++;
427 }
428 } else {
429 struct sk_buff *skb;
430
431 /* Check if the packet is long enough to accept without copying
432 to a minimally-sized skbuff. */
433 if (pkt_len < tulip_rx_copybreak &&
434 (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
435 skb_reserve(skb, 2); /* 16 byte align the IP header */
436 pci_dma_sync_single_for_cpu(tp->pdev,
437 tp->rx_buffers[entry].mapping,
438 pkt_len, PCI_DMA_FROMDEVICE);
439 #if ! defined(__alpha__)
440 skb_copy_to_linear_data(skb, tp->rx_buffers[entry].skb->data,
441 pkt_len);
442 skb_put(skb, pkt_len);
443 #else
444 memcpy(skb_put(skb, pkt_len),
445 tp->rx_buffers[entry].skb->data,
446 pkt_len);
447 #endif
448 pci_dma_sync_single_for_device(tp->pdev,
449 tp->rx_buffers[entry].mapping,
450 pkt_len, PCI_DMA_FROMDEVICE);
451 } else { /* Pass up the skb already on the Rx ring. */
452 char *temp = skb_put(skb = tp->rx_buffers[entry].skb,
453 pkt_len);
454
455 #ifndef final_version
456 if (tp->rx_buffers[entry].mapping !=
457 le32_to_cpu(tp->rx_ring[entry].buffer1)) {
458 dev_err(&dev->dev,
459 "Internal fault: The skbuff addresses do not match in tulip_rx: %08x vs. %Lx %p / %p\n",
460 le32_to_cpu(tp->rx_ring[entry].buffer1),
461 (long long)tp->rx_buffers[entry].mapping,
462 skb->head, temp);
463 }
464 #endif
465
466 pci_unmap_single(tp->pdev, tp->rx_buffers[entry].mapping,
467 PKT_BUF_SZ, PCI_DMA_FROMDEVICE);
468
469 tp->rx_buffers[entry].skb = NULL;
470 tp->rx_buffers[entry].mapping = 0;
471 }
472 skb->protocol = eth_type_trans(skb, dev);
473
474 netif_rx(skb);
475
476 dev->stats.rx_packets++;
477 dev->stats.rx_bytes += pkt_len;
478 }
479 received++;
480 entry = (++tp->cur_rx) % RX_RING_SIZE;
481 }
482 return received;
483 }
484 #endif /* CONFIG_TULIP_NAPI */
485
486 static inline unsigned int phy_interrupt (struct net_device *dev)
487 {
488 #ifdef __hppa__
489 struct tulip_private *tp = netdev_priv(dev);
490 int csr12 = ioread32(tp->base_addr + CSR12) & 0xff;
491
492 if (csr12 != tp->csr12_shadow) {
493 /* ack interrupt */
494 iowrite32(csr12 | 0x02, tp->base_addr + CSR12);
495 tp->csr12_shadow = csr12;
496 /* do link change stuff */
497 spin_lock(&tp->lock);
498 tulip_check_duplex(dev);
499 spin_unlock(&tp->lock);
500 /* clear irq ack bit */
501 iowrite32(csr12 & ~0x02, tp->base_addr + CSR12);
502
503 return 1;
504 }
505 #endif
506
507 return 0;
508 }
509
510 /* The interrupt handler does all of the Rx thread work and cleans up
511 after the Tx thread. */
512 irqreturn_t tulip_interrupt(int irq, void *dev_instance)
513 {
514 struct net_device *dev = (struct net_device *)dev_instance;
515 struct tulip_private *tp = netdev_priv(dev);
516 void __iomem *ioaddr = tp->base_addr;
517 int csr5;
518 int missed;
519 int rx = 0;
520 int tx = 0;
521 int oi = 0;
522 int maxrx = RX_RING_SIZE;
523 int maxtx = TX_RING_SIZE;
524 int maxoi = TX_RING_SIZE;
525 #ifdef CONFIG_TULIP_NAPI
526 int rxd = 0;
527 #else
528 int entry;
529 #endif
530 unsigned int work_count = tulip_max_interrupt_work;
531 unsigned int handled = 0;
532
533 /* Let's see whether the interrupt really is for us */
534 csr5 = ioread32(ioaddr + CSR5);
535
536 if (tp->flags & HAS_PHY_IRQ)
537 handled = phy_interrupt (dev);
538
539 if ((csr5 & (NormalIntr|AbnormalIntr)) == 0)
540 return IRQ_RETVAL(handled);
541
542 tp->nir++;
543
544 do {
545
546 #ifdef CONFIG_TULIP_NAPI
547
548 if (!rxd && (csr5 & (RxIntr | RxNoBuf))) {
549 rxd++;
550 /* Mask RX intrs and add the device to poll list. */
551 iowrite32(tulip_tbl[tp->chip_id].valid_intrs&~RxPollInt, ioaddr + CSR7);
552 napi_schedule(&tp->napi);
553
554 if (!(csr5&~(AbnormalIntr|NormalIntr|RxPollInt|TPLnkPass)))
555 break;
556 }
557
558 /* Acknowledge the interrupt sources we handle here ASAP
559 the poll function does Rx and RxNoBuf acking */
560
561 iowrite32(csr5 & 0x0001ff3f, ioaddr + CSR5);
562
563 #else
564 /* Acknowledge all of the current interrupt sources ASAP. */
565 iowrite32(csr5 & 0x0001ffff, ioaddr + CSR5);
566
567
568 if (csr5 & (RxIntr | RxNoBuf)) {
569 rx += tulip_rx(dev);
570 tulip_refill_rx(dev);
571 }
572
573 #endif /* CONFIG_TULIP_NAPI */
574
575 if (tulip_debug > 4)
576 netdev_dbg(dev, "interrupt csr5=%#8.8x new csr5=%#8.8x\n",
577 csr5, ioread32(ioaddr + CSR5));
578
579
580 if (csr5 & (TxNoBuf | TxDied | TxIntr | TimerInt)) {
581 unsigned int dirty_tx;
582
583 spin_lock(&tp->lock);
584
585 for (dirty_tx = tp->dirty_tx; tp->cur_tx - dirty_tx > 0;
586 dirty_tx++) {
587 int entry = dirty_tx % TX_RING_SIZE;
588 int status = le32_to_cpu(tp->tx_ring[entry].status);
589
590 if (status < 0)
591 break; /* It still has not been Txed */
592
593 /* Check for Rx filter setup frames. */
594 if (tp->tx_buffers[entry].skb == NULL) {
595 /* test because dummy frames not mapped */
596 if (tp->tx_buffers[entry].mapping)
597 pci_unmap_single(tp->pdev,
598 tp->tx_buffers[entry].mapping,
599 sizeof(tp->setup_frame),
600 PCI_DMA_TODEVICE);
601 continue;
602 }
603
604 if (status & 0x8000) {
605 /* There was an major error, log it. */
606 #ifndef final_version
607 if (tulip_debug > 1)
608 netdev_dbg(dev, "Transmit error, Tx status %08x\n",
609 status);
610 #endif
611 dev->stats.tx_errors++;
612 if (status & 0x4104)
613 dev->stats.tx_aborted_errors++;
614 if (status & 0x0C00)
615 dev->stats.tx_carrier_errors++;
616 if (status & 0x0200)
617 dev->stats.tx_window_errors++;
618 if (status & 0x0002)
619 dev->stats.tx_fifo_errors++;
620 if ((status & 0x0080) && tp->full_duplex == 0)
621 dev->stats.tx_heartbeat_errors++;
622 } else {
623 dev->stats.tx_bytes +=
624 tp->tx_buffers[entry].skb->len;
625 dev->stats.collisions += (status >> 3) & 15;
626 dev->stats.tx_packets++;
627 }
628
629 pci_unmap_single(tp->pdev, tp->tx_buffers[entry].mapping,
630 tp->tx_buffers[entry].skb->len,
631 PCI_DMA_TODEVICE);
632
633 /* Free the original skb. */
634 dev_kfree_skb_irq(tp->tx_buffers[entry].skb);
635 tp->tx_buffers[entry].skb = NULL;
636 tp->tx_buffers[entry].mapping = 0;
637 tx++;
638 }
639
640 #ifndef final_version
641 if (tp->cur_tx - dirty_tx > TX_RING_SIZE) {
642 dev_err(&dev->dev,
643 "Out-of-sync dirty pointer, %d vs. %d\n",
644 dirty_tx, tp->cur_tx);
645 dirty_tx += TX_RING_SIZE;
646 }
647 #endif
648
649 if (tp->cur_tx - dirty_tx < TX_RING_SIZE - 2)
650 netif_wake_queue(dev);
651
652 tp->dirty_tx = dirty_tx;
653 if (csr5 & TxDied) {
654 if (tulip_debug > 2)
655 dev_warn(&dev->dev,
656 "The transmitter stopped. CSR5 is %x, CSR6 %x, new CSR6 %x\n",
657 csr5, ioread32(ioaddr + CSR6),
658 tp->csr6);
659 tulip_restart_rxtx(tp);
660 }
661 spin_unlock(&tp->lock);
662 }
663
664 /* Log errors. */
665 if (csr5 & AbnormalIntr) { /* Abnormal error summary bit. */
666 if (csr5 == 0xffffffff)
667 break;
668 if (csr5 & TxJabber)
669 dev->stats.tx_errors++;
670 if (csr5 & TxFIFOUnderflow) {
671 if ((tp->csr6 & 0xC000) != 0xC000)
672 tp->csr6 += 0x4000; /* Bump up the Tx threshold */
673 else
674 tp->csr6 |= 0x00200000; /* Store-n-forward. */
675 /* Restart the transmit process. */
676 tulip_restart_rxtx(tp);
677 iowrite32(0, ioaddr + CSR1);
678 }
679 if (csr5 & (RxDied | RxNoBuf)) {
680 if (tp->flags & COMET_MAC_ADDR) {
681 iowrite32(tp->mc_filter[0], ioaddr + 0xAC);
682 iowrite32(tp->mc_filter[1], ioaddr + 0xB0);
683 }
684 }
685 if (csr5 & RxDied) { /* Missed a Rx frame. */
686 dev->stats.rx_missed_errors += ioread32(ioaddr + CSR8) & 0xffff;
687 dev->stats.rx_errors++;
688 tulip_start_rxtx(tp);
689 }
690 /*
691 * NB: t21142_lnk_change() does a del_timer_sync(), so be careful if this
692 * call is ever done under the spinlock
693 */
694 if (csr5 & (TPLnkPass | TPLnkFail | 0x08000000)) {
695 if (tp->link_change)
696 (tp->link_change)(dev, csr5);
697 }
698 if (csr5 & SystemError) {
699 int error = (csr5 >> 23) & 7;
700 /* oops, we hit a PCI error. The code produced corresponds
701 * to the reason:
702 * 0 - parity error
703 * 1 - master abort
704 * 2 - target abort
705 * Note that on parity error, we should do a software reset
706 * of the chip to get it back into a sane state (according
707 * to the 21142/3 docs that is).
708 * -- rmk
709 */
710 dev_err(&dev->dev,
711 "(%lu) System Error occurred (%d)\n",
712 tp->nir, error);
713 }
714 /* Clear all error sources, included undocumented ones! */
715 iowrite32(0x0800f7ba, ioaddr + CSR5);
716 oi++;
717 }
718 if (csr5 & TimerInt) {
719
720 if (tulip_debug > 2)
721 dev_err(&dev->dev,
722 "Re-enabling interrupts, %08x\n",
723 csr5);
724 iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR7);
725 tp->ttimer = 0;
726 oi++;
727 }
728 if (tx > maxtx || rx > maxrx || oi > maxoi) {
729 if (tulip_debug > 1)
730 dev_warn(&dev->dev, "Too much work during an interrupt, csr5=0x%08x. (%lu) (%d,%d,%d)\n",
731 csr5, tp->nir, tx, rx, oi);
732
733 /* Acknowledge all interrupt sources. */
734 iowrite32(0x8001ffff, ioaddr + CSR5);
735 if (tp->flags & HAS_INTR_MITIGATION) {
736 /* Josip Loncaric at ICASE did extensive experimentation
737 to develop a good interrupt mitigation setting.*/
738 iowrite32(0x8b240000, ioaddr + CSR11);
739 } else if (tp->chip_id == LC82C168) {
740 /* the LC82C168 doesn't have a hw timer.*/
741 iowrite32(0x00, ioaddr + CSR7);
742 mod_timer(&tp->timer, RUN_AT(HZ/50));
743 } else {
744 /* Mask all interrupting sources, set timer to
745 re-enable. */
746 iowrite32(((~csr5) & 0x0001ebef) | AbnormalIntr | TimerInt, ioaddr + CSR7);
747 iowrite32(0x0012, ioaddr + CSR11);
748 }
749 break;
750 }
751
752 work_count--;
753 if (work_count == 0)
754 break;
755
756 csr5 = ioread32(ioaddr + CSR5);
757
758 #ifdef CONFIG_TULIP_NAPI
759 if (rxd)
760 csr5 &= ~RxPollInt;
761 } while ((csr5 & (TxNoBuf |
762 TxDied |
763 TxIntr |
764 TimerInt |
765 /* Abnormal intr. */
766 RxDied |
767 TxFIFOUnderflow |
768 TxJabber |
769 TPLnkFail |
770 SystemError )) != 0);
771 #else
772 } while ((csr5 & (NormalIntr|AbnormalIntr)) != 0);
773
774 tulip_refill_rx(dev);
775
776 /* check if the card is in suspend mode */
777 entry = tp->dirty_rx % RX_RING_SIZE;
778 if (tp->rx_buffers[entry].skb == NULL) {
779 if (tulip_debug > 1)
780 dev_warn(&dev->dev,
781 "in rx suspend mode: (%lu) (tp->cur_rx = %u, ttimer = %d, rx = %d) go/stay in suspend mode\n",
782 tp->nir, tp->cur_rx, tp->ttimer, rx);
783 if (tp->chip_id == LC82C168) {
784 iowrite32(0x00, ioaddr + CSR7);
785 mod_timer(&tp->timer, RUN_AT(HZ/50));
786 } else {
787 if (tp->ttimer == 0 || (ioread32(ioaddr + CSR11) & 0xffff) == 0) {
788 if (tulip_debug > 1)
789 dev_warn(&dev->dev,
790 "in rx suspend mode: (%lu) set timer\n",
791 tp->nir);
792 iowrite32(tulip_tbl[tp->chip_id].valid_intrs | TimerInt,
793 ioaddr + CSR7);
794 iowrite32(TimerInt, ioaddr + CSR5);
795 iowrite32(12, ioaddr + CSR11);
796 tp->ttimer = 1;
797 }
798 }
799 }
800 #endif /* CONFIG_TULIP_NAPI */
801
802 if ((missed = ioread32(ioaddr + CSR8) & 0x1ffff)) {
803 dev->stats.rx_dropped += missed & 0x10000 ? 0x10000 : missed;
804 }
805
806 if (tulip_debug > 4)
807 netdev_dbg(dev, "exiting interrupt, csr5=%#04x\n",
808 ioread32(ioaddr + CSR5));
809
810 return IRQ_HANDLED;
811 }
Linux Btrfs Development