1 /******************************************************************************
3 Copyright(c) 2003 - 2006 Intel Corporation. All rights reserved.
5 This program is free software; you can redistribute it and/or modify it
6 under the terms of version 2 of the GNU General Public License as
7 published by the Free Software Foundation.
9 This program is distributed in the hope that it will be useful, but WITHOUT
10 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 You should have received a copy of the GNU General Public License along with
15 this program; if not, write to the Free Software Foundation, Inc., 59
16 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
18 The full GNU General Public License is included in this distribution in the
22 Intel Linux Wireless <ilw@linux.intel.com>
23 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 Portions of this file are based on the sample_* files provided by Wireless
26 Extensions 0.26 package and copyright (c) 1997-2003 Jean Tourrilhes
29 Portions of this file are based on the Host AP project,
30 Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
32 Copyright (c) 2002-2003, Jouni Malinen <j@w1.fi>
34 Portions of ipw2100_mod_firmware_load, ipw2100_do_mod_firmware_load, and
35 ipw2100_fw_load are loosely based on drivers/sound/sound_firmware.c
36 available in the 2.4.25 kernel sources, and are copyright (c) Alan Cox
38 ******************************************************************************/
41 Initial driver on which this is based was developed by Janusz Gorycki,
42 Maciej Urbaniak, and Maciej Sosnowski.
44 Promiscuous mode support added by Jacek Wysoczynski and Maciej Urbaniak.
48 Tx - Commands and Data
50 Firmware and host share a circular queue of Transmit Buffer Descriptors (TBDs)
51 Each TBD contains a pointer to the physical (dma_addr_t) address of data being
52 sent to the firmware as well as the length of the data.
54 The host writes to the TBD queue at the WRITE index. The WRITE index points
55 to the _next_ packet to be written and is advanced when after the TBD has been
58 The firmware pulls from the TBD queue at the READ index. The READ index points
59 to the currently being read entry, and is advanced once the firmware is
62 When data is sent to the firmware, the first TBD is used to indicate to the
63 firmware if a Command or Data is being sent. If it is Command, all of the
64 command information is contained within the physical address referred to by the
65 TBD. If it is Data, the first TBD indicates the type of data packet, number
66 of fragments, etc. The next TBD then refers to the actual packet location.
68 The Tx flow cycle is as follows:
70 1) ipw2100_tx() is called by kernel with SKB to transmit
71 2) Packet is move from the tx_free_list and appended to the transmit pending
73 3) work is scheduled to move pending packets into the shared circular queue.
74 4) when placing packet in the circular queue, the incoming SKB is DMA mapped
75 to a physical address. That address is entered into a TBD. Two TBDs are
76 filled out. The first indicating a data packet, the second referring to the
78 5) the packet is removed from tx_pend_list and placed on the end of the
79 firmware pending list (fw_pend_list)
80 6) firmware is notified that the WRITE index has
81 7) Once the firmware has processed the TBD, INTA is triggered.
82 8) For each Tx interrupt received from the firmware, the READ index is checked
83 to see which TBDs are done being processed.
84 9) For each TBD that has been processed, the ISR pulls the oldest packet
85 from the fw_pend_list.
86 10)The packet structure contained in the fw_pend_list is then used
87 to unmap the DMA address and to free the SKB originally passed to the driver
89 11)The packet structure is placed onto the tx_free_list
91 The above steps are the same for commands, only the msg_free_list/msg_pend_list
92 are used instead of tx_free_list/tx_pend_list
96 Critical Sections / Locking :
98 There are two locks utilized. The first is the low level lock (priv->low_lock)
99 that protects the following:
101 - Access to the Tx/Rx queue lists via priv->low_lock. The lists are as follows:
103 tx_free_list : Holds pre-allocated Tx buffers.
104 TAIL modified in __ipw2100_tx_process()
105 HEAD modified in ipw2100_tx()
107 tx_pend_list : Holds used Tx buffers waiting to go into the TBD ring
108 TAIL modified ipw2100_tx()
109 HEAD modified by ipw2100_tx_send_data()
111 msg_free_list : Holds pre-allocated Msg (Command) buffers
112 TAIL modified in __ipw2100_tx_process()
113 HEAD modified in ipw2100_hw_send_command()
115 msg_pend_list : Holds used Msg buffers waiting to go into the TBD ring
116 TAIL modified in ipw2100_hw_send_command()
117 HEAD modified in ipw2100_tx_send_commands()
119 The flow of data on the TX side is as follows:
121 MSG_FREE_LIST + COMMAND => MSG_PEND_LIST => TBD => MSG_FREE_LIST
122 TX_FREE_LIST + DATA => TX_PEND_LIST => TBD => TX_FREE_LIST
124 The methods that work on the TBD ring are protected via priv->low_lock.
126 - The internal data state of the device itself
127 - Access to the firmware read/write indexes for the BD queues
130 All external entry functions are locked with the priv->action_lock to ensure
131 that only one external action is invoked at a time.
136 #include <linux/compiler.h>
137 #include <linux/errno.h>
138 #include <linux/if_arp.h>
139 #include <linux/in6.h>
140 #include <linux/in.h>
141 #include <linux/ip.h>
142 #include <linux/kernel.h>
143 #include <linux/kmod.h>
144 #include <linux/module.h>
145 #include <linux/netdevice.h>
146 #include <linux/ethtool.h>
147 #include <linux/pci.h>
148 #include <linux/dma-mapping.h>
149 #include <linux/proc_fs.h>
150 #include <linux/skbuff.h>
151 #include <asm/uaccess.h>
153 #include <linux/fs.h>
154 #include <linux/mm.h>
155 #include <linux/slab.h>
156 #include <linux/unistd.h>
157 #include <linux/stringify.h>
158 #include <linux/tcp.h>
159 #include <linux/types.h>
160 #include <linux/time.h>
161 #include <linux/firmware.h>
162 #include <linux/acpi.h>
163 #include <linux/ctype.h>
164 #include <linux/pm_qos_params.h>
166 #include <net/lib80211.h>
170 #define IPW2100_VERSION "git-1.2.2"
172 #define DRV_NAME "ipw2100"
173 #define DRV_VERSION IPW2100_VERSION
174 #define DRV_DESCRIPTION "Intel(R) PRO/Wireless 2100 Network Driver"
175 #define DRV_COPYRIGHT "Copyright(c) 2003-2006 Intel Corporation"
177 static struct pm_qos_request_list ipw2100_pm_qos_req
;
179 /* Debugging stuff */
180 #ifdef CONFIG_IPW2100_DEBUG
181 #define IPW2100_RX_DEBUG /* Reception debugging */
184 MODULE_DESCRIPTION(DRV_DESCRIPTION
);
185 MODULE_VERSION(DRV_VERSION
);
186 MODULE_AUTHOR(DRV_COPYRIGHT
);
187 MODULE_LICENSE("GPL");
189 static int debug
= 0;
190 static int network_mode
= 0;
191 static int channel
= 0;
192 static int associate
= 0;
193 static int disable
= 0;
195 static struct ipw2100_fw ipw2100_firmware
;
198 #include <linux/moduleparam.h>
199 module_param(debug
, int, 0444);
200 module_param_named(mode
, network_mode
, int, 0444);
201 module_param(channel
, int, 0444);
202 module_param(associate
, int, 0444);
203 module_param(disable
, int, 0444);
205 MODULE_PARM_DESC(debug
, "debug level");
206 MODULE_PARM_DESC(mode
, "network mode (0=BSS,1=IBSS,2=Monitor)");
207 MODULE_PARM_DESC(channel
, "channel");
208 MODULE_PARM_DESC(associate
, "auto associate when scanning (default off)");
209 MODULE_PARM_DESC(disable
, "manually disable the radio (default 0 [radio on])");
211 static u32 ipw2100_debug_level
= IPW_DL_NONE
;
213 #ifdef CONFIG_IPW2100_DEBUG
214 #define IPW_DEBUG(level, message...) \
216 if (ipw2100_debug_level & (level)) { \
217 printk(KERN_DEBUG "ipw2100: %c %s ", \
218 in_interrupt() ? 'I' : 'U', __func__); \
223 #define IPW_DEBUG(level, message...) do {} while (0)
224 #endif /* CONFIG_IPW2100_DEBUG */
226 #ifdef CONFIG_IPW2100_DEBUG
227 static const char *command_types
[] = {
229 "unused", /* HOST_ATTENTION */
231 "unused", /* SLEEP */
232 "unused", /* HOST_POWER_DOWN */
235 "unused", /* SET_IMR */
238 "AUTHENTICATION_TYPE",
241 "INTERNATIONAL_MODE",
256 "CLEAR_ALL_MULTICAST",
277 "AP_OR_STATION_TABLE",
281 "unused", /* SAVE_CALIBRATION */
282 "unused", /* RESTORE_CALIBRATION */
286 "HOST_PRE_POWER_DOWN",
287 "unused", /* HOST_INTERRUPT_COALESCING */
289 "CARD_DISABLE_PHY_OFF",
292 "SET_STATION_STAT_BITS",
293 "CLEAR_STATIONS_STAT_BITS",
295 "SET_SECURITY_INFORMATION",
296 "DISASSOCIATION_BSSID",
301 #define WEXT_USECHANNELS 1
303 static const long ipw2100_frequencies
[] = {
304 2412, 2417, 2422, 2427,
305 2432, 2437, 2442, 2447,
306 2452, 2457, 2462, 2467,
310 #define FREQ_COUNT ARRAY_SIZE(ipw2100_frequencies)
312 static const long ipw2100_rates_11b
[] = {
319 static struct ieee80211_rate ipw2100_bg_rates
[] = {
321 { .bitrate
= 20, .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
322 { .bitrate
= 55, .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
323 { .bitrate
= 110, .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
326 #define RATE_COUNT ARRAY_SIZE(ipw2100_rates_11b)
328 /* Pre-decl until we get the code solid and then we can clean it up */
329 static void ipw2100_tx_send_commands(struct ipw2100_priv
*priv
);
330 static void ipw2100_tx_send_data(struct ipw2100_priv
*priv
);
331 static int ipw2100_adapter_setup(struct ipw2100_priv
*priv
);
333 static void ipw2100_queues_initialize(struct ipw2100_priv
*priv
);
334 static void ipw2100_queues_free(struct ipw2100_priv
*priv
);
335 static int ipw2100_queues_allocate(struct ipw2100_priv
*priv
);
337 static int ipw2100_fw_download(struct ipw2100_priv
*priv
,
338 struct ipw2100_fw
*fw
);
339 static int ipw2100_get_firmware(struct ipw2100_priv
*priv
,
340 struct ipw2100_fw
*fw
);
341 static int ipw2100_get_fwversion(struct ipw2100_priv
*priv
, char *buf
,
343 static int ipw2100_get_ucodeversion(struct ipw2100_priv
*priv
, char *buf
,
345 static void ipw2100_release_firmware(struct ipw2100_priv
*priv
,
346 struct ipw2100_fw
*fw
);
347 static int ipw2100_ucode_download(struct ipw2100_priv
*priv
,
348 struct ipw2100_fw
*fw
);
349 static void ipw2100_wx_event_work(struct work_struct
*work
);
350 static struct iw_statistics
*ipw2100_wx_wireless_stats(struct net_device
*dev
);
351 static struct iw_handler_def ipw2100_wx_handler_def
;
353 static inline void read_register(struct net_device
*dev
, u32 reg
, u32
* val
)
355 *val
= readl((void __iomem
*)(dev
->base_addr
+ reg
));
356 IPW_DEBUG_IO("r: 0x%08X => 0x%08X\n", reg
, *val
);
359 static inline void write_register(struct net_device
*dev
, u32 reg
, u32 val
)
361 writel(val
, (void __iomem
*)(dev
->base_addr
+ reg
));
362 IPW_DEBUG_IO("w: 0x%08X <= 0x%08X\n", reg
, val
);
365 static inline void read_register_word(struct net_device
*dev
, u32 reg
,
368 *val
= readw((void __iomem
*)(dev
->base_addr
+ reg
));
369 IPW_DEBUG_IO("r: 0x%08X => %04X\n", reg
, *val
);
372 static inline void read_register_byte(struct net_device
*dev
, u32 reg
, u8
* val
)
374 *val
= readb((void __iomem
*)(dev
->base_addr
+ reg
));
375 IPW_DEBUG_IO("r: 0x%08X => %02X\n", reg
, *val
);
378 static inline void write_register_word(struct net_device
*dev
, u32 reg
, u16 val
)
380 writew(val
, (void __iomem
*)(dev
->base_addr
+ reg
));
381 IPW_DEBUG_IO("w: 0x%08X <= %04X\n", reg
, val
);
384 static inline void write_register_byte(struct net_device
*dev
, u32 reg
, u8 val
)
386 writeb(val
, (void __iomem
*)(dev
->base_addr
+ reg
));
387 IPW_DEBUG_IO("w: 0x%08X =< %02X\n", reg
, val
);
390 static inline void read_nic_dword(struct net_device
*dev
, u32 addr
, u32
* val
)
392 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
393 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
394 read_register(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
397 static inline void write_nic_dword(struct net_device
*dev
, u32 addr
, u32 val
)
399 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
400 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
401 write_register(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
404 static inline void read_nic_word(struct net_device
*dev
, u32 addr
, u16
* val
)
406 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
407 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
408 read_register_word(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
411 static inline void write_nic_word(struct net_device
*dev
, u32 addr
, u16 val
)
413 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
414 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
415 write_register_word(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
418 static inline void read_nic_byte(struct net_device
*dev
, u32 addr
, u8
* val
)
420 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
421 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
422 read_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
425 static inline void write_nic_byte(struct net_device
*dev
, u32 addr
, u8 val
)
427 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
428 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
429 write_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
432 static inline void write_nic_auto_inc_address(struct net_device
*dev
, u32 addr
)
434 write_register(dev
, IPW_REG_AUTOINCREMENT_ADDRESS
,
435 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
438 static inline void write_nic_dword_auto_inc(struct net_device
*dev
, u32 val
)
440 write_register(dev
, IPW_REG_AUTOINCREMENT_DATA
, val
);
443 static void write_nic_memory(struct net_device
*dev
, u32 addr
, u32 len
,
451 /* read first nibble byte by byte */
452 aligned_addr
= addr
& (~0x3);
453 dif_len
= addr
- aligned_addr
;
455 /* Start reading at aligned_addr + dif_len */
456 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
458 for (i
= dif_len
; i
< 4; i
++, buf
++)
459 write_register_byte(dev
,
460 IPW_REG_INDIRECT_ACCESS_DATA
+ i
,
467 /* read DWs through autoincrement registers */
468 write_register(dev
, IPW_REG_AUTOINCREMENT_ADDRESS
, aligned_addr
);
469 aligned_len
= len
& (~0x3);
470 for (i
= 0; i
< aligned_len
; i
+= 4, buf
+= 4, aligned_addr
+= 4)
471 write_register(dev
, IPW_REG_AUTOINCREMENT_DATA
, *(u32
*) buf
);
473 /* copy the last nibble */
474 dif_len
= len
- aligned_len
;
475 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
, aligned_addr
);
476 for (i
= 0; i
< dif_len
; i
++, buf
++)
477 write_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
+ i
,
481 static void read_nic_memory(struct net_device
*dev
, u32 addr
, u32 len
,
489 /* read first nibble byte by byte */
490 aligned_addr
= addr
& (~0x3);
491 dif_len
= addr
- aligned_addr
;
493 /* Start reading at aligned_addr + dif_len */
494 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
496 for (i
= dif_len
; i
< 4; i
++, buf
++)
497 read_register_byte(dev
,
498 IPW_REG_INDIRECT_ACCESS_DATA
+ i
,
505 /* read DWs through autoincrement registers */
506 write_register(dev
, IPW_REG_AUTOINCREMENT_ADDRESS
, aligned_addr
);
507 aligned_len
= len
& (~0x3);
508 for (i
= 0; i
< aligned_len
; i
+= 4, buf
+= 4, aligned_addr
+= 4)
509 read_register(dev
, IPW_REG_AUTOINCREMENT_DATA
, (u32
*) buf
);
511 /* copy the last nibble */
512 dif_len
= len
- aligned_len
;
513 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
, aligned_addr
);
514 for (i
= 0; i
< dif_len
; i
++, buf
++)
515 read_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
+ i
, buf
);
518 static inline int ipw2100_hw_is_adapter_in_system(struct net_device
*dev
)
520 return (dev
->base_addr
&&
522 ((void __iomem
*)(dev
->base_addr
+
523 IPW_REG_DOA_DEBUG_AREA_START
))
524 == IPW_DATA_DOA_DEBUG_VALUE
));
527 static int ipw2100_get_ordinal(struct ipw2100_priv
*priv
, u32 ord
,
528 void *val
, u32
* len
)
530 struct ipw2100_ordinals
*ordinals
= &priv
->ordinals
;
537 if (ordinals
->table1_addr
== 0) {
538 printk(KERN_WARNING DRV_NAME
": attempt to use fw ordinals "
539 "before they have been loaded.\n");
543 if (IS_ORDINAL_TABLE_ONE(ordinals
, ord
)) {
544 if (*len
< IPW_ORD_TAB_1_ENTRY_SIZE
) {
545 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
547 printk(KERN_WARNING DRV_NAME
548 ": ordinal buffer length too small, need %zd\n",
549 IPW_ORD_TAB_1_ENTRY_SIZE
);
554 read_nic_dword(priv
->net_dev
,
555 ordinals
->table1_addr
+ (ord
<< 2), &addr
);
556 read_nic_dword(priv
->net_dev
, addr
, val
);
558 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
563 if (IS_ORDINAL_TABLE_TWO(ordinals
, ord
)) {
565 ord
-= IPW_START_ORD_TAB_2
;
567 /* get the address of statistic */
568 read_nic_dword(priv
->net_dev
,
569 ordinals
->table2_addr
+ (ord
<< 3), &addr
);
571 /* get the second DW of statistics ;
572 * two 16-bit words - first is length, second is count */
573 read_nic_dword(priv
->net_dev
,
574 ordinals
->table2_addr
+ (ord
<< 3) + sizeof(u32
),
577 /* get each entry length */
578 field_len
= *((u16
*) & field_info
);
580 /* get number of entries */
581 field_count
= *(((u16
*) & field_info
) + 1);
583 /* abort if no enough memory */
584 total_length
= field_len
* field_count
;
585 if (total_length
> *len
) {
594 /* read the ordinal data from the SRAM */
595 read_nic_memory(priv
->net_dev
, addr
, total_length
, val
);
600 printk(KERN_WARNING DRV_NAME
": ordinal %d neither in table 1 nor "
601 "in table 2\n", ord
);
606 static int ipw2100_set_ordinal(struct ipw2100_priv
*priv
, u32 ord
, u32
* val
,
609 struct ipw2100_ordinals
*ordinals
= &priv
->ordinals
;
612 if (IS_ORDINAL_TABLE_ONE(ordinals
, ord
)) {
613 if (*len
!= IPW_ORD_TAB_1_ENTRY_SIZE
) {
614 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
615 IPW_DEBUG_INFO("wrong size\n");
619 read_nic_dword(priv
->net_dev
,
620 ordinals
->table1_addr
+ (ord
<< 2), &addr
);
622 write_nic_dword(priv
->net_dev
, addr
, *val
);
624 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
629 IPW_DEBUG_INFO("wrong table\n");
630 if (IS_ORDINAL_TABLE_TWO(ordinals
, ord
))
636 static char *snprint_line(char *buf
, size_t count
,
637 const u8
* data
, u32 len
, u32 ofs
)
642 out
= snprintf(buf
, count
, "%08X", ofs
);
644 for (l
= 0, i
= 0; i
< 2; i
++) {
645 out
+= snprintf(buf
+ out
, count
- out
, " ");
646 for (j
= 0; j
< 8 && l
< len
; j
++, l
++)
647 out
+= snprintf(buf
+ out
, count
- out
, "%02X ",
650 out
+= snprintf(buf
+ out
, count
- out
, " ");
653 out
+= snprintf(buf
+ out
, count
- out
, " ");
654 for (l
= 0, i
= 0; i
< 2; i
++) {
655 out
+= snprintf(buf
+ out
, count
- out
, " ");
656 for (j
= 0; j
< 8 && l
< len
; j
++, l
++) {
657 c
= data
[(i
* 8 + j
)];
658 if (!isascii(c
) || !isprint(c
))
661 out
+= snprintf(buf
+ out
, count
- out
, "%c", c
);
665 out
+= snprintf(buf
+ out
, count
- out
, " ");
671 static void printk_buf(int level
, const u8
* data
, u32 len
)
675 if (!(ipw2100_debug_level
& level
))
679 printk(KERN_DEBUG
"%s\n",
680 snprint_line(line
, sizeof(line
), &data
[ofs
],
681 min(len
, 16U), ofs
));
683 len
-= min(len
, 16U);
687 #define MAX_RESET_BACKOFF 10
689 static void schedule_reset(struct ipw2100_priv
*priv
)
691 unsigned long now
= get_seconds();
693 /* If we haven't received a reset request within the backoff period,
694 * then we can reset the backoff interval so this reset occurs
696 if (priv
->reset_backoff
&&
697 (now
- priv
->last_reset
> priv
->reset_backoff
))
698 priv
->reset_backoff
= 0;
700 priv
->last_reset
= get_seconds();
702 if (!(priv
->status
& STATUS_RESET_PENDING
)) {
703 IPW_DEBUG_INFO("%s: Scheduling firmware restart (%ds).\n",
704 priv
->net_dev
->name
, priv
->reset_backoff
);
705 netif_carrier_off(priv
->net_dev
);
706 netif_stop_queue(priv
->net_dev
);
707 priv
->status
|= STATUS_RESET_PENDING
;
708 if (priv
->reset_backoff
)
709 schedule_delayed_work(&priv
->reset_work
,
710 priv
->reset_backoff
* HZ
);
712 schedule_delayed_work(&priv
->reset_work
, 0);
714 if (priv
->reset_backoff
< MAX_RESET_BACKOFF
)
715 priv
->reset_backoff
++;
717 wake_up_interruptible(&priv
->wait_command_queue
);
719 IPW_DEBUG_INFO("%s: Firmware restart already in progress.\n",
720 priv
->net_dev
->name
);
724 #define HOST_COMPLETE_TIMEOUT (2 * HZ)
725 static int ipw2100_hw_send_command(struct ipw2100_priv
*priv
,
726 struct host_command
*cmd
)
728 struct list_head
*element
;
729 struct ipw2100_tx_packet
*packet
;
733 IPW_DEBUG_HC("Sending %s command (#%d), %d bytes\n",
734 command_types
[cmd
->host_command
], cmd
->host_command
,
735 cmd
->host_command_length
);
736 printk_buf(IPW_DL_HC
, (u8
*) cmd
->host_command_parameters
,
737 cmd
->host_command_length
);
739 spin_lock_irqsave(&priv
->low_lock
, flags
);
741 if (priv
->fatal_error
) {
743 ("Attempt to send command while hardware in fatal error condition.\n");
748 if (!(priv
->status
& STATUS_RUNNING
)) {
750 ("Attempt to send command while hardware is not running.\n");
755 if (priv
->status
& STATUS_CMD_ACTIVE
) {
757 ("Attempt to send command while another command is pending.\n");
762 if (list_empty(&priv
->msg_free_list
)) {
763 IPW_DEBUG_INFO("no available msg buffers\n");
767 priv
->status
|= STATUS_CMD_ACTIVE
;
768 priv
->messages_sent
++;
770 element
= priv
->msg_free_list
.next
;
772 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
773 packet
->jiffy_start
= jiffies
;
775 /* initialize the firmware command packet */
776 packet
->info
.c_struct
.cmd
->host_command_reg
= cmd
->host_command
;
777 packet
->info
.c_struct
.cmd
->host_command_reg1
= cmd
->host_command1
;
778 packet
->info
.c_struct
.cmd
->host_command_len_reg
=
779 cmd
->host_command_length
;
780 packet
->info
.c_struct
.cmd
->sequence
= cmd
->host_command_sequence
;
782 memcpy(packet
->info
.c_struct
.cmd
->host_command_params_reg
,
783 cmd
->host_command_parameters
,
784 sizeof(packet
->info
.c_struct
.cmd
->host_command_params_reg
));
787 DEC_STAT(&priv
->msg_free_stat
);
789 list_add_tail(element
, &priv
->msg_pend_list
);
790 INC_STAT(&priv
->msg_pend_stat
);
792 ipw2100_tx_send_commands(priv
);
793 ipw2100_tx_send_data(priv
);
795 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
798 * We must wait for this command to complete before another
799 * command can be sent... but if we wait more than 3 seconds
800 * then there is a problem.
804 wait_event_interruptible_timeout(priv
->wait_command_queue
,
806 status
& STATUS_CMD_ACTIVE
),
807 HOST_COMPLETE_TIMEOUT
);
810 IPW_DEBUG_INFO("Command completion failed out after %dms.\n",
811 1000 * (HOST_COMPLETE_TIMEOUT
/ HZ
));
812 priv
->fatal_error
= IPW2100_ERR_MSG_TIMEOUT
;
813 priv
->status
&= ~STATUS_CMD_ACTIVE
;
814 schedule_reset(priv
);
818 if (priv
->fatal_error
) {
819 printk(KERN_WARNING DRV_NAME
": %s: firmware fatal error\n",
820 priv
->net_dev
->name
);
824 /* !!!!! HACK TEST !!!!!
825 * When lots of debug trace statements are enabled, the driver
826 * doesn't seem to have as many firmware restart cycles...
828 * As a test, we're sticking in a 1/100s delay here */
829 schedule_timeout_uninterruptible(msecs_to_jiffies(10));
834 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
840 * Verify the values and data access of the hardware
841 * No locks needed or used. No functions called.
843 static int ipw2100_verify(struct ipw2100_priv
*priv
)
848 u32 val1
= 0x76543210;
849 u32 val2
= 0xFEDCBA98;
851 /* Domain 0 check - all values should be DOA_DEBUG */
852 for (address
= IPW_REG_DOA_DEBUG_AREA_START
;
853 address
< IPW_REG_DOA_DEBUG_AREA_END
; address
+= sizeof(u32
)) {
854 read_register(priv
->net_dev
, address
, &data1
);
855 if (data1
!= IPW_DATA_DOA_DEBUG_VALUE
)
859 /* Domain 1 check - use arbitrary read/write compare */
860 for (address
= 0; address
< 5; address
++) {
861 /* The memory area is not used now */
862 write_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x32,
864 write_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x36,
866 read_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x32,
868 read_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x36,
870 if (val1
== data1
&& val2
== data2
)
879 * Loop until the CARD_DISABLED bit is the same value as the
882 * TODO: See if it would be more efficient to do a wait/wake
883 * cycle and have the completion event trigger the wakeup
886 #define IPW_CARD_DISABLE_COMPLETE_WAIT 100 // 100 milli
887 static int ipw2100_wait_for_card_state(struct ipw2100_priv
*priv
, int state
)
891 u32 len
= sizeof(card_state
);
894 for (i
= 0; i
<= IPW_CARD_DISABLE_COMPLETE_WAIT
* 1000; i
+= 50) {
895 err
= ipw2100_get_ordinal(priv
, IPW_ORD_CARD_DISABLED
,
898 IPW_DEBUG_INFO("Query of CARD_DISABLED ordinal "
903 /* We'll break out if either the HW state says it is
904 * in the state we want, or if HOST_COMPLETE command
906 if ((card_state
== state
) ||
907 ((priv
->status
& STATUS_ENABLED
) ?
908 IPW_HW_STATE_ENABLED
: IPW_HW_STATE_DISABLED
) == state
) {
909 if (state
== IPW_HW_STATE_ENABLED
)
910 priv
->status
|= STATUS_ENABLED
;
912 priv
->status
&= ~STATUS_ENABLED
;
920 IPW_DEBUG_INFO("ipw2100_wait_for_card_state to %s state timed out\n",
921 state
? "DISABLED" : "ENABLED");
925 /*********************************************************************
926 Procedure : sw_reset_and_clock
927 Purpose : Asserts s/w reset, asserts clock initialization
928 and waits for clock stabilization
929 ********************************************************************/
930 static int sw_reset_and_clock(struct ipw2100_priv
*priv
)
936 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
937 IPW_AUX_HOST_RESET_REG_SW_RESET
);
939 // wait for clock stabilization
940 for (i
= 0; i
< 1000; i
++) {
941 udelay(IPW_WAIT_RESET_ARC_COMPLETE_DELAY
);
943 // check clock ready bit
944 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, &r
);
945 if (r
& IPW_AUX_HOST_RESET_REG_PRINCETON_RESET
)
950 return -EIO
; // TODO: better error value
952 /* set "initialization complete" bit to move adapter to
954 write_register(priv
->net_dev
, IPW_REG_GP_CNTRL
,
955 IPW_AUX_HOST_GP_CNTRL_BIT_INIT_DONE
);
957 /* wait for clock stabilization */
958 for (i
= 0; i
< 10000; i
++) {
959 udelay(IPW_WAIT_CLOCK_STABILIZATION_DELAY
* 4);
961 /* check clock ready bit */
962 read_register(priv
->net_dev
, IPW_REG_GP_CNTRL
, &r
);
963 if (r
& IPW_AUX_HOST_GP_CNTRL_BIT_CLOCK_READY
)
968 return -EIO
; /* TODO: better error value */
970 /* set D0 standby bit */
971 read_register(priv
->net_dev
, IPW_REG_GP_CNTRL
, &r
);
972 write_register(priv
->net_dev
, IPW_REG_GP_CNTRL
,
973 r
| IPW_AUX_HOST_GP_CNTRL_BIT_HOST_ALLOWS_STANDBY
);
978 /*********************************************************************
979 Procedure : ipw2100_download_firmware
980 Purpose : Initiaze adapter after power on.
982 1. assert s/w reset first!
983 2. awake clocks & wait for clock stabilization
984 3. hold ARC (don't ask me why...)
985 4. load Dino ucode and reset/clock init again
986 5. zero-out shared mem
988 *******************************************************************/
989 static int ipw2100_download_firmware(struct ipw2100_priv
*priv
)
995 /* Fetch the firmware and microcode */
996 struct ipw2100_fw ipw2100_firmware
;
999 if (priv
->fatal_error
) {
1000 IPW_DEBUG_ERROR("%s: ipw2100_download_firmware called after "
1001 "fatal error %d. Interface must be brought down.\n",
1002 priv
->net_dev
->name
, priv
->fatal_error
);
1006 if (!ipw2100_firmware
.version
) {
1007 err
= ipw2100_get_firmware(priv
, &ipw2100_firmware
);
1009 IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
1010 priv
->net_dev
->name
, err
);
1011 priv
->fatal_error
= IPW2100_ERR_FW_LOAD
;
1016 err
= ipw2100_get_firmware(priv
, &ipw2100_firmware
);
1018 IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
1019 priv
->net_dev
->name
, err
);
1020 priv
->fatal_error
= IPW2100_ERR_FW_LOAD
;
1024 priv
->firmware_version
= ipw2100_firmware
.version
;
1026 /* s/w reset and clock stabilization */
1027 err
= sw_reset_and_clock(priv
);
1029 IPW_DEBUG_ERROR("%s: sw_reset_and_clock failed: %d\n",
1030 priv
->net_dev
->name
, err
);
1034 err
= ipw2100_verify(priv
);
1036 IPW_DEBUG_ERROR("%s: ipw2100_verify failed: %d\n",
1037 priv
->net_dev
->name
, err
);
1042 write_nic_dword(priv
->net_dev
,
1043 IPW_INTERNAL_REGISTER_HALT_AND_RESET
, 0x80000000);
1045 /* allow ARC to run */
1046 write_register(priv
->net_dev
, IPW_REG_RESET_REG
, 0);
1048 /* load microcode */
1049 err
= ipw2100_ucode_download(priv
, &ipw2100_firmware
);
1051 printk(KERN_ERR DRV_NAME
": %s: Error loading microcode: %d\n",
1052 priv
->net_dev
->name
, err
);
1057 write_nic_dword(priv
->net_dev
,
1058 IPW_INTERNAL_REGISTER_HALT_AND_RESET
, 0x00000000);
1060 /* s/w reset and clock stabilization (again!!!) */
1061 err
= sw_reset_and_clock(priv
);
1063 printk(KERN_ERR DRV_NAME
1064 ": %s: sw_reset_and_clock failed: %d\n",
1065 priv
->net_dev
->name
, err
);
1070 err
= ipw2100_fw_download(priv
, &ipw2100_firmware
);
1072 IPW_DEBUG_ERROR("%s: Error loading firmware: %d\n",
1073 priv
->net_dev
->name
, err
);
1078 * When the .resume method of the driver is called, the other
1079 * part of the system, i.e. the ide driver could still stay in
1080 * the suspend stage. This prevents us from loading the firmware
1081 * from the disk. --YZ
1084 /* free any storage allocated for firmware image */
1085 ipw2100_release_firmware(priv
, &ipw2100_firmware
);
1088 /* zero out Domain 1 area indirectly (Si requirement) */
1089 for (address
= IPW_HOST_FW_SHARED_AREA0
;
1090 address
< IPW_HOST_FW_SHARED_AREA0_END
; address
+= 4)
1091 write_nic_dword(priv
->net_dev
, address
, 0);
1092 for (address
= IPW_HOST_FW_SHARED_AREA1
;
1093 address
< IPW_HOST_FW_SHARED_AREA1_END
; address
+= 4)
1094 write_nic_dword(priv
->net_dev
, address
, 0);
1095 for (address
= IPW_HOST_FW_SHARED_AREA2
;
1096 address
< IPW_HOST_FW_SHARED_AREA2_END
; address
+= 4)
1097 write_nic_dword(priv
->net_dev
, address
, 0);
1098 for (address
= IPW_HOST_FW_SHARED_AREA3
;
1099 address
< IPW_HOST_FW_SHARED_AREA3_END
; address
+= 4)
1100 write_nic_dword(priv
->net_dev
, address
, 0);
1101 for (address
= IPW_HOST_FW_INTERRUPT_AREA
;
1102 address
< IPW_HOST_FW_INTERRUPT_AREA_END
; address
+= 4)
1103 write_nic_dword(priv
->net_dev
, address
, 0);
1108 ipw2100_release_firmware(priv
, &ipw2100_firmware
);
1112 static inline void ipw2100_enable_interrupts(struct ipw2100_priv
*priv
)
1114 if (priv
->status
& STATUS_INT_ENABLED
)
1116 priv
->status
|= STATUS_INT_ENABLED
;
1117 write_register(priv
->net_dev
, IPW_REG_INTA_MASK
, IPW_INTERRUPT_MASK
);
1120 static inline void ipw2100_disable_interrupts(struct ipw2100_priv
*priv
)
1122 if (!(priv
->status
& STATUS_INT_ENABLED
))
1124 priv
->status
&= ~STATUS_INT_ENABLED
;
1125 write_register(priv
->net_dev
, IPW_REG_INTA_MASK
, 0x0);
1128 static void ipw2100_initialize_ordinals(struct ipw2100_priv
*priv
)
1130 struct ipw2100_ordinals
*ord
= &priv
->ordinals
;
1132 IPW_DEBUG_INFO("enter\n");
1134 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_1
,
1137 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_2
,
1140 read_nic_dword(priv
->net_dev
, ord
->table1_addr
, &ord
->table1_size
);
1141 read_nic_dword(priv
->net_dev
, ord
->table2_addr
, &ord
->table2_size
);
1143 ord
->table2_size
&= 0x0000FFFF;
1145 IPW_DEBUG_INFO("table 1 size: %d\n", ord
->table1_size
);
1146 IPW_DEBUG_INFO("table 2 size: %d\n", ord
->table2_size
);
1147 IPW_DEBUG_INFO("exit\n");
1150 static inline void ipw2100_hw_set_gpio(struct ipw2100_priv
*priv
)
1154 * Set GPIO 3 writable by FW; GPIO 1 writable
1155 * by driver and enable clock
1157 reg
= (IPW_BIT_GPIO_GPIO3_MASK
| IPW_BIT_GPIO_GPIO1_ENABLE
|
1158 IPW_BIT_GPIO_LED_OFF
);
1159 write_register(priv
->net_dev
, IPW_REG_GPIO
, reg
);
1162 static int rf_kill_active(struct ipw2100_priv
*priv
)
1164 #define MAX_RF_KILL_CHECKS 5
1165 #define RF_KILL_CHECK_DELAY 40
1167 unsigned short value
= 0;
1171 if (!(priv
->hw_features
& HW_FEATURE_RFKILL
)) {
1172 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, false);
1173 priv
->status
&= ~STATUS_RF_KILL_HW
;
1177 for (i
= 0; i
< MAX_RF_KILL_CHECKS
; i
++) {
1178 udelay(RF_KILL_CHECK_DELAY
);
1179 read_register(priv
->net_dev
, IPW_REG_GPIO
, ®
);
1180 value
= (value
<< 1) | ((reg
& IPW_BIT_GPIO_RF_KILL
) ? 0 : 1);
1184 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, true);
1185 priv
->status
|= STATUS_RF_KILL_HW
;
1187 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, false);
1188 priv
->status
&= ~STATUS_RF_KILL_HW
;
1191 return (value
== 0);
1194 static int ipw2100_get_hw_features(struct ipw2100_priv
*priv
)
1200 * EEPROM_SRAM_DB_START_ADDRESS using ordinal in ordinal table 1
1203 if (ipw2100_get_ordinal
1204 (priv
, IPW_ORD_EEPROM_SRAM_DB_BLOCK_START_ADDRESS
, &addr
, &len
)) {
1205 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
1210 IPW_DEBUG_INFO("EEPROM address: %08X\n", addr
);
1213 * EEPROM version is the byte at offset 0xfd in firmware
1214 * We read 4 bytes, then shift out the byte we actually want */
1215 read_nic_dword(priv
->net_dev
, addr
+ 0xFC, &val
);
1216 priv
->eeprom_version
= (val
>> 24) & 0xFF;
1217 IPW_DEBUG_INFO("EEPROM version: %d\n", priv
->eeprom_version
);
1220 * HW RF Kill enable is bit 0 in byte at offset 0x21 in firmware
1222 * notice that the EEPROM bit is reverse polarity, i.e.
1223 * bit = 0 signifies HW RF kill switch is supported
1224 * bit = 1 signifies HW RF kill switch is NOT supported
1226 read_nic_dword(priv
->net_dev
, addr
+ 0x20, &val
);
1227 if (!((val
>> 24) & 0x01))
1228 priv
->hw_features
|= HW_FEATURE_RFKILL
;
1230 IPW_DEBUG_INFO("HW RF Kill: %ssupported.\n",
1231 (priv
->hw_features
& HW_FEATURE_RFKILL
) ? "" : "not ");
1237 * Start firmware execution after power on and intialization
1240 * 2. Wait for f/w initialization completes;
1242 static int ipw2100_start_adapter(struct ipw2100_priv
*priv
)
1245 u32 inta
, inta_mask
, gpio
;
1247 IPW_DEBUG_INFO("enter\n");
1249 if (priv
->status
& STATUS_RUNNING
)
1253 * Initialize the hw - drive adapter to DO state by setting
1254 * init_done bit. Wait for clk_ready bit and Download
1257 if (ipw2100_download_firmware(priv
)) {
1258 printk(KERN_ERR DRV_NAME
1259 ": %s: Failed to power on the adapter.\n",
1260 priv
->net_dev
->name
);
1264 /* Clear the Tx, Rx and Msg queues and the r/w indexes
1265 * in the firmware RBD and TBD ring queue */
1266 ipw2100_queues_initialize(priv
);
1268 ipw2100_hw_set_gpio(priv
);
1270 /* TODO -- Look at disabling interrupts here to make sure none
1271 * get fired during FW initialization */
1273 /* Release ARC - clear reset bit */
1274 write_register(priv
->net_dev
, IPW_REG_RESET_REG
, 0);
1276 /* wait for f/w intialization complete */
1277 IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n");
1280 schedule_timeout_uninterruptible(msecs_to_jiffies(40));
1281 /* Todo... wait for sync command ... */
1283 read_register(priv
->net_dev
, IPW_REG_INTA
, &inta
);
1285 /* check "init done" bit */
1286 if (inta
& IPW2100_INTA_FW_INIT_DONE
) {
1287 /* reset "init done" bit */
1288 write_register(priv
->net_dev
, IPW_REG_INTA
,
1289 IPW2100_INTA_FW_INIT_DONE
);
1293 /* check error conditions : we check these after the firmware
1294 * check so that if there is an error, the interrupt handler
1295 * will see it and the adapter will be reset */
1297 (IPW2100_INTA_FATAL_ERROR
| IPW2100_INTA_PARITY_ERROR
)) {
1298 /* clear error conditions */
1299 write_register(priv
->net_dev
, IPW_REG_INTA
,
1300 IPW2100_INTA_FATAL_ERROR
|
1301 IPW2100_INTA_PARITY_ERROR
);
1305 /* Clear out any pending INTAs since we aren't supposed to have
1306 * interrupts enabled at this point... */
1307 read_register(priv
->net_dev
, IPW_REG_INTA
, &inta
);
1308 read_register(priv
->net_dev
, IPW_REG_INTA_MASK
, &inta_mask
);
1309 inta
&= IPW_INTERRUPT_MASK
;
1310 /* Clear out any pending interrupts */
1311 if (inta
& inta_mask
)
1312 write_register(priv
->net_dev
, IPW_REG_INTA
, inta
);
1314 IPW_DEBUG_FW("f/w initialization complete: %s\n",
1315 i
? "SUCCESS" : "FAILED");
1318 printk(KERN_WARNING DRV_NAME
1319 ": %s: Firmware did not initialize.\n",
1320 priv
->net_dev
->name
);
1324 /* allow firmware to write to GPIO1 & GPIO3 */
1325 read_register(priv
->net_dev
, IPW_REG_GPIO
, &gpio
);
1327 gpio
|= (IPW_BIT_GPIO_GPIO1_MASK
| IPW_BIT_GPIO_GPIO3_MASK
);
1329 write_register(priv
->net_dev
, IPW_REG_GPIO
, gpio
);
1331 /* Ready to receive commands */
1332 priv
->status
|= STATUS_RUNNING
;
1334 /* The adapter has been reset; we are not associated */
1335 priv
->status
&= ~(STATUS_ASSOCIATING
| STATUS_ASSOCIATED
);
1337 IPW_DEBUG_INFO("exit\n");
1342 static inline void ipw2100_reset_fatalerror(struct ipw2100_priv
*priv
)
1344 if (!priv
->fatal_error
)
1347 priv
->fatal_errors
[priv
->fatal_index
++] = priv
->fatal_error
;
1348 priv
->fatal_index
%= IPW2100_ERROR_QUEUE
;
1349 priv
->fatal_error
= 0;
1352 /* NOTE: Our interrupt is disabled when this method is called */
1353 static int ipw2100_power_cycle_adapter(struct ipw2100_priv
*priv
)
1358 IPW_DEBUG_INFO("Power cycling the hardware.\n");
1360 ipw2100_hw_set_gpio(priv
);
1362 /* Step 1. Stop Master Assert */
1363 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1364 IPW_AUX_HOST_RESET_REG_STOP_MASTER
);
1366 /* Step 2. Wait for stop Master Assert
1367 * (not more than 50us, otherwise ret error */
1370 udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY
);
1371 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, ®
);
1373 if (reg
& IPW_AUX_HOST_RESET_REG_MASTER_DISABLED
)
1377 priv
->status
&= ~STATUS_RESET_PENDING
;
1381 ("exit - waited too long for master assert stop\n");
1385 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1386 IPW_AUX_HOST_RESET_REG_SW_RESET
);
1388 /* Reset any fatal_error conditions */
1389 ipw2100_reset_fatalerror(priv
);
1391 /* At this point, the adapter is now stopped and disabled */
1392 priv
->status
&= ~(STATUS_RUNNING
| STATUS_ASSOCIATING
|
1393 STATUS_ASSOCIATED
| STATUS_ENABLED
);
1399 * Send the CARD_DISABLE_PHY_OFF command to the card to disable it
1401 * After disabling, if the card was associated, a STATUS_ASSN_LOST will be sent.
1403 * STATUS_CARD_DISABLE_NOTIFICATION will be sent regardless of
1404 * if STATUS_ASSN_LOST is sent.
1406 static int ipw2100_hw_phy_off(struct ipw2100_priv
*priv
)
1409 #define HW_PHY_OFF_LOOP_DELAY (HZ / 5000)
1411 struct host_command cmd
= {
1412 .host_command
= CARD_DISABLE_PHY_OFF
,
1413 .host_command_sequence
= 0,
1414 .host_command_length
= 0,
1419 IPW_DEBUG_HC("CARD_DISABLE_PHY_OFF\n");
1421 /* Turn off the radio */
1422 err
= ipw2100_hw_send_command(priv
, &cmd
);
1426 for (i
= 0; i
< 2500; i
++) {
1427 read_nic_dword(priv
->net_dev
, IPW2100_CONTROL_REG
, &val1
);
1428 read_nic_dword(priv
->net_dev
, IPW2100_COMMAND
, &val2
);
1430 if ((val1
& IPW2100_CONTROL_PHY_OFF
) &&
1431 (val2
& IPW2100_COMMAND_PHY_OFF
))
1434 schedule_timeout_uninterruptible(HW_PHY_OFF_LOOP_DELAY
);
1440 static int ipw2100_enable_adapter(struct ipw2100_priv
*priv
)
1442 struct host_command cmd
= {
1443 .host_command
= HOST_COMPLETE
,
1444 .host_command_sequence
= 0,
1445 .host_command_length
= 0
1449 IPW_DEBUG_HC("HOST_COMPLETE\n");
1451 if (priv
->status
& STATUS_ENABLED
)
1454 mutex_lock(&priv
->adapter_mutex
);
1456 if (rf_kill_active(priv
)) {
1457 IPW_DEBUG_HC("Command aborted due to RF kill active.\n");
1461 err
= ipw2100_hw_send_command(priv
, &cmd
);
1463 IPW_DEBUG_INFO("Failed to send HOST_COMPLETE command\n");
1467 err
= ipw2100_wait_for_card_state(priv
, IPW_HW_STATE_ENABLED
);
1469 IPW_DEBUG_INFO("%s: card not responding to init command.\n",
1470 priv
->net_dev
->name
);
1474 if (priv
->stop_hang_check
) {
1475 priv
->stop_hang_check
= 0;
1476 schedule_delayed_work(&priv
->hang_check
, HZ
/ 2);
1480 mutex_unlock(&priv
->adapter_mutex
);
1484 static int ipw2100_hw_stop_adapter(struct ipw2100_priv
*priv
)
1486 #define HW_POWER_DOWN_DELAY (msecs_to_jiffies(100))
1488 struct host_command cmd
= {
1489 .host_command
= HOST_PRE_POWER_DOWN
,
1490 .host_command_sequence
= 0,
1491 .host_command_length
= 0,
1496 if (!(priv
->status
& STATUS_RUNNING
))
1499 priv
->status
|= STATUS_STOPPING
;
1501 /* We can only shut down the card if the firmware is operational. So,
1502 * if we haven't reset since a fatal_error, then we can not send the
1503 * shutdown commands. */
1504 if (!priv
->fatal_error
) {
1505 /* First, make sure the adapter is enabled so that the PHY_OFF
1506 * command can shut it down */
1507 ipw2100_enable_adapter(priv
);
1509 err
= ipw2100_hw_phy_off(priv
);
1511 printk(KERN_WARNING DRV_NAME
1512 ": Error disabling radio %d\n", err
);
1515 * If in D0-standby mode going directly to D3 may cause a
1516 * PCI bus violation. Therefore we must change out of the D0
1519 * Sending the PREPARE_FOR_POWER_DOWN will restrict the
1520 * hardware from going into standby mode and will transition
1521 * out of D0-standby if it is already in that state.
1523 * STATUS_PREPARE_POWER_DOWN_COMPLETE will be sent by the
1524 * driver upon completion. Once received, the driver can
1525 * proceed to the D3 state.
1527 * Prepare for power down command to fw. This command would
1528 * take HW out of D0-standby and prepare it for D3 state.
1530 * Currently FW does not support event notification for this
1531 * event. Therefore, skip waiting for it. Just wait a fixed
1534 IPW_DEBUG_HC("HOST_PRE_POWER_DOWN\n");
1536 err
= ipw2100_hw_send_command(priv
, &cmd
);
1538 printk(KERN_WARNING DRV_NAME
": "
1539 "%s: Power down command failed: Error %d\n",
1540 priv
->net_dev
->name
, err
);
1542 schedule_timeout_uninterruptible(HW_POWER_DOWN_DELAY
);
1545 priv
->status
&= ~STATUS_ENABLED
;
1548 * Set GPIO 3 writable by FW; GPIO 1 writable
1549 * by driver and enable clock
1551 ipw2100_hw_set_gpio(priv
);
1554 * Power down adapter. Sequence:
1555 * 1. Stop master assert (RESET_REG[9]=1)
1556 * 2. Wait for stop master (RESET_REG[8]==1)
1557 * 3. S/w reset assert (RESET_REG[7] = 1)
1560 /* Stop master assert */
1561 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1562 IPW_AUX_HOST_RESET_REG_STOP_MASTER
);
1564 /* wait stop master not more than 50 usec.
1565 * Otherwise return error. */
1566 for (i
= 5; i
> 0; i
--) {
1569 /* Check master stop bit */
1570 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, ®
);
1572 if (reg
& IPW_AUX_HOST_RESET_REG_MASTER_DISABLED
)
1577 printk(KERN_WARNING DRV_NAME
1578 ": %s: Could now power down adapter.\n",
1579 priv
->net_dev
->name
);
1581 /* assert s/w reset */
1582 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1583 IPW_AUX_HOST_RESET_REG_SW_RESET
);
1585 priv
->status
&= ~(STATUS_RUNNING
| STATUS_STOPPING
);
1590 static int ipw2100_disable_adapter(struct ipw2100_priv
*priv
)
1592 struct host_command cmd
= {
1593 .host_command
= CARD_DISABLE
,
1594 .host_command_sequence
= 0,
1595 .host_command_length
= 0
1599 IPW_DEBUG_HC("CARD_DISABLE\n");
1601 if (!(priv
->status
& STATUS_ENABLED
))
1604 /* Make sure we clear the associated state */
1605 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
1607 if (!priv
->stop_hang_check
) {
1608 priv
->stop_hang_check
= 1;
1609 cancel_delayed_work(&priv
->hang_check
);
1612 mutex_lock(&priv
->adapter_mutex
);
1614 err
= ipw2100_hw_send_command(priv
, &cmd
);
1616 printk(KERN_WARNING DRV_NAME
1617 ": exit - failed to send CARD_DISABLE command\n");
1621 err
= ipw2100_wait_for_card_state(priv
, IPW_HW_STATE_DISABLED
);
1623 printk(KERN_WARNING DRV_NAME
1624 ": exit - card failed to change to DISABLED\n");
1628 IPW_DEBUG_INFO("TODO: implement scan state machine\n");
1631 mutex_unlock(&priv
->adapter_mutex
);
1635 static int ipw2100_set_scan_options(struct ipw2100_priv
*priv
)
1637 struct host_command cmd
= {
1638 .host_command
= SET_SCAN_OPTIONS
,
1639 .host_command_sequence
= 0,
1640 .host_command_length
= 8
1644 IPW_DEBUG_INFO("enter\n");
1646 IPW_DEBUG_SCAN("setting scan options\n");
1648 cmd
.host_command_parameters
[0] = 0;
1650 if (!(priv
->config
& CFG_ASSOCIATE
))
1651 cmd
.host_command_parameters
[0] |= IPW_SCAN_NOASSOCIATE
;
1652 if ((priv
->ieee
->sec
.flags
& SEC_ENABLED
) && priv
->ieee
->sec
.enabled
)
1653 cmd
.host_command_parameters
[0] |= IPW_SCAN_MIXED_CELL
;
1654 if (priv
->config
& CFG_PASSIVE_SCAN
)
1655 cmd
.host_command_parameters
[0] |= IPW_SCAN_PASSIVE
;
1657 cmd
.host_command_parameters
[1] = priv
->channel_mask
;
1659 err
= ipw2100_hw_send_command(priv
, &cmd
);
1661 IPW_DEBUG_HC("SET_SCAN_OPTIONS 0x%04X\n",
1662 cmd
.host_command_parameters
[0]);
1667 static int ipw2100_start_scan(struct ipw2100_priv
*priv
)
1669 struct host_command cmd
= {
1670 .host_command
= BROADCAST_SCAN
,
1671 .host_command_sequence
= 0,
1672 .host_command_length
= 4
1676 IPW_DEBUG_HC("START_SCAN\n");
1678 cmd
.host_command_parameters
[0] = 0;
1680 /* No scanning if in monitor mode */
1681 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
)
1684 if (priv
->status
& STATUS_SCANNING
) {
1685 IPW_DEBUG_SCAN("Scan requested while already in scan...\n");
1689 IPW_DEBUG_INFO("enter\n");
1691 /* Not clearing here; doing so makes iwlist always return nothing...
1693 * We should modify the table logic to use aging tables vs. clearing
1694 * the table on each scan start.
1696 IPW_DEBUG_SCAN("starting scan\n");
1698 priv
->status
|= STATUS_SCANNING
;
1699 err
= ipw2100_hw_send_command(priv
, &cmd
);
1701 priv
->status
&= ~STATUS_SCANNING
;
1703 IPW_DEBUG_INFO("exit\n");
1708 static const struct libipw_geo ipw_geos
[] = {
1712 .bg
= {{2412, 1}, {2417, 2}, {2422, 3},
1713 {2427, 4}, {2432, 5}, {2437, 6},
1714 {2442, 7}, {2447, 8}, {2452, 9},
1715 {2457, 10}, {2462, 11}, {2467, 12},
1716 {2472, 13}, {2484, 14}},
1720 static int ipw2100_up(struct ipw2100_priv
*priv
, int deferred
)
1722 unsigned long flags
;
1725 u32 ord_len
= sizeof(lock
);
1727 /* Age scan list entries found before suspend */
1728 if (priv
->suspend_time
) {
1729 libipw_networks_age(priv
->ieee
, priv
->suspend_time
);
1730 priv
->suspend_time
= 0;
1733 /* Quiet if manually disabled. */
1734 if (priv
->status
& STATUS_RF_KILL_SW
) {
1735 IPW_DEBUG_INFO("%s: Radio is disabled by Manual Disable "
1736 "switch\n", priv
->net_dev
->name
);
1740 /* the ipw2100 hardware really doesn't want power management delays
1741 * longer than 175usec
1743 pm_qos_update_request(&ipw2100_pm_qos_req
, 175);
1745 /* If the interrupt is enabled, turn it off... */
1746 spin_lock_irqsave(&priv
->low_lock
, flags
);
1747 ipw2100_disable_interrupts(priv
);
1749 /* Reset any fatal_error conditions */
1750 ipw2100_reset_fatalerror(priv
);
1751 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1753 if (priv
->status
& STATUS_POWERED
||
1754 (priv
->status
& STATUS_RESET_PENDING
)) {
1755 /* Power cycle the card ... */
1756 if (ipw2100_power_cycle_adapter(priv
)) {
1757 printk(KERN_WARNING DRV_NAME
1758 ": %s: Could not cycle adapter.\n",
1759 priv
->net_dev
->name
);
1764 priv
->status
|= STATUS_POWERED
;
1766 /* Load the firmware, start the clocks, etc. */
1767 if (ipw2100_start_adapter(priv
)) {
1768 printk(KERN_ERR DRV_NAME
1769 ": %s: Failed to start the firmware.\n",
1770 priv
->net_dev
->name
);
1775 ipw2100_initialize_ordinals(priv
);
1777 /* Determine capabilities of this particular HW configuration */
1778 if (ipw2100_get_hw_features(priv
)) {
1779 printk(KERN_ERR DRV_NAME
1780 ": %s: Failed to determine HW features.\n",
1781 priv
->net_dev
->name
);
1786 /* Initialize the geo */
1787 if (libipw_set_geo(priv
->ieee
, &ipw_geos
[0])) {
1788 printk(KERN_WARNING DRV_NAME
"Could not set geo\n");
1791 priv
->ieee
->freq_band
= LIBIPW_24GHZ_BAND
;
1794 if (ipw2100_set_ordinal(priv
, IPW_ORD_PERS_DB_LOCK
, &lock
, &ord_len
)) {
1795 printk(KERN_ERR DRV_NAME
1796 ": %s: Failed to clear ordinal lock.\n",
1797 priv
->net_dev
->name
);
1802 priv
->status
&= ~STATUS_SCANNING
;
1804 if (rf_kill_active(priv
)) {
1805 printk(KERN_INFO
"%s: Radio is disabled by RF switch.\n",
1806 priv
->net_dev
->name
);
1808 if (priv
->stop_rf_kill
) {
1809 priv
->stop_rf_kill
= 0;
1810 schedule_delayed_work(&priv
->rf_kill
,
1811 round_jiffies_relative(HZ
));
1817 /* Turn on the interrupt so that commands can be processed */
1818 ipw2100_enable_interrupts(priv
);
1820 /* Send all of the commands that must be sent prior to
1822 if (ipw2100_adapter_setup(priv
)) {
1823 printk(KERN_ERR DRV_NAME
": %s: Failed to start the card.\n",
1824 priv
->net_dev
->name
);
1830 /* Enable the adapter - sends HOST_COMPLETE */
1831 if (ipw2100_enable_adapter(priv
)) {
1832 printk(KERN_ERR DRV_NAME
": "
1833 "%s: failed in call to enable adapter.\n",
1834 priv
->net_dev
->name
);
1835 ipw2100_hw_stop_adapter(priv
);
1840 /* Start a scan . . . */
1841 ipw2100_set_scan_options(priv
);
1842 ipw2100_start_scan(priv
);
1849 static void ipw2100_down(struct ipw2100_priv
*priv
)
1851 unsigned long flags
;
1852 union iwreq_data wrqu
= {
1854 .sa_family
= ARPHRD_ETHER
}
1856 int associated
= priv
->status
& STATUS_ASSOCIATED
;
1858 /* Kill the RF switch timer */
1859 if (!priv
->stop_rf_kill
) {
1860 priv
->stop_rf_kill
= 1;
1861 cancel_delayed_work(&priv
->rf_kill
);
1864 /* Kill the firmware hang check timer */
1865 if (!priv
->stop_hang_check
) {
1866 priv
->stop_hang_check
= 1;
1867 cancel_delayed_work(&priv
->hang_check
);
1870 /* Kill any pending resets */
1871 if (priv
->status
& STATUS_RESET_PENDING
)
1872 cancel_delayed_work(&priv
->reset_work
);
1874 /* Make sure the interrupt is on so that FW commands will be
1875 * processed correctly */
1876 spin_lock_irqsave(&priv
->low_lock
, flags
);
1877 ipw2100_enable_interrupts(priv
);
1878 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1880 if (ipw2100_hw_stop_adapter(priv
))
1881 printk(KERN_ERR DRV_NAME
": %s: Error stopping adapter.\n",
1882 priv
->net_dev
->name
);
1884 /* Do not disable the interrupt until _after_ we disable
1885 * the adaptor. Otherwise the CARD_DISABLE command will never
1886 * be ack'd by the firmware */
1887 spin_lock_irqsave(&priv
->low_lock
, flags
);
1888 ipw2100_disable_interrupts(priv
);
1889 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1891 pm_qos_update_request(&ipw2100_pm_qos_req
, PM_QOS_DEFAULT_VALUE
);
1893 /* We have to signal any supplicant if we are disassociating */
1895 wireless_send_event(priv
->net_dev
, SIOCGIWAP
, &wrqu
, NULL
);
1897 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
1898 netif_carrier_off(priv
->net_dev
);
1899 netif_stop_queue(priv
->net_dev
);
1902 /* Called by register_netdev() */
1903 static int ipw2100_net_init(struct net_device
*dev
)
1905 struct ipw2100_priv
*priv
= libipw_priv(dev
);
1907 return ipw2100_up(priv
, 1);
1910 static int ipw2100_wdev_init(struct net_device
*dev
)
1912 struct ipw2100_priv
*priv
= libipw_priv(dev
);
1913 const struct libipw_geo
*geo
= libipw_get_geo(priv
->ieee
);
1914 struct wireless_dev
*wdev
= &priv
->ieee
->wdev
;
1917 memcpy(wdev
->wiphy
->perm_addr
, priv
->mac_addr
, ETH_ALEN
);
1919 /* fill-out priv->ieee->bg_band */
1920 if (geo
->bg_channels
) {
1921 struct ieee80211_supported_band
*bg_band
= &priv
->ieee
->bg_band
;
1923 bg_band
->band
= IEEE80211_BAND_2GHZ
;
1924 bg_band
->n_channels
= geo
->bg_channels
;
1925 bg_band
->channels
= kcalloc(geo
->bg_channels
,
1926 sizeof(struct ieee80211_channel
),
1928 if (!bg_band
->channels
) {
1932 /* translate geo->bg to bg_band.channels */
1933 for (i
= 0; i
< geo
->bg_channels
; i
++) {
1934 bg_band
->channels
[i
].band
= IEEE80211_BAND_2GHZ
;
1935 bg_band
->channels
[i
].center_freq
= geo
->bg
[i
].freq
;
1936 bg_band
->channels
[i
].hw_value
= geo
->bg
[i
].channel
;
1937 bg_band
->channels
[i
].max_power
= geo
->bg
[i
].max_power
;
1938 if (geo
->bg
[i
].flags
& LIBIPW_CH_PASSIVE_ONLY
)
1939 bg_band
->channels
[i
].flags
|=
1940 IEEE80211_CHAN_PASSIVE_SCAN
;
1941 if (geo
->bg
[i
].flags
& LIBIPW_CH_NO_IBSS
)
1942 bg_band
->channels
[i
].flags
|=
1943 IEEE80211_CHAN_NO_IBSS
;
1944 if (geo
->bg
[i
].flags
& LIBIPW_CH_RADAR_DETECT
)
1945 bg_band
->channels
[i
].flags
|=
1946 IEEE80211_CHAN_RADAR
;
1947 /* No equivalent for LIBIPW_CH_80211H_RULES,
1948 LIBIPW_CH_UNIFORM_SPREADING, or
1949 LIBIPW_CH_B_ONLY... */
1951 /* point at bitrate info */
1952 bg_band
->bitrates
= ipw2100_bg_rates
;
1953 bg_band
->n_bitrates
= RATE_COUNT
;
1955 wdev
->wiphy
->bands
[IEEE80211_BAND_2GHZ
] = bg_band
;
1958 set_wiphy_dev(wdev
->wiphy
, &priv
->pci_dev
->dev
);
1959 if (wiphy_register(wdev
->wiphy
)) {
1966 static void ipw2100_reset_adapter(struct work_struct
*work
)
1968 struct ipw2100_priv
*priv
=
1969 container_of(work
, struct ipw2100_priv
, reset_work
.work
);
1970 unsigned long flags
;
1971 union iwreq_data wrqu
= {
1973 .sa_family
= ARPHRD_ETHER
}
1975 int associated
= priv
->status
& STATUS_ASSOCIATED
;
1977 spin_lock_irqsave(&priv
->low_lock
, flags
);
1978 IPW_DEBUG_INFO(": %s: Restarting adapter.\n", priv
->net_dev
->name
);
1980 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
1981 priv
->status
|= STATUS_SECURITY_UPDATED
;
1983 /* Force a power cycle even if interface hasn't been opened
1985 cancel_delayed_work(&priv
->reset_work
);
1986 priv
->status
|= STATUS_RESET_PENDING
;
1987 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1989 mutex_lock(&priv
->action_mutex
);
1990 /* stop timed checks so that they don't interfere with reset */
1991 priv
->stop_hang_check
= 1;
1992 cancel_delayed_work(&priv
->hang_check
);
1994 /* We have to signal any supplicant if we are disassociating */
1996 wireless_send_event(priv
->net_dev
, SIOCGIWAP
, &wrqu
, NULL
);
1998 ipw2100_up(priv
, 0);
1999 mutex_unlock(&priv
->action_mutex
);
2003 static void isr_indicate_associated(struct ipw2100_priv
*priv
, u32 status
)
2006 #define MAC_ASSOCIATION_READ_DELAY (HZ)
2008 unsigned int len
, essid_len
;
2009 char essid
[IW_ESSID_MAX_SIZE
];
2014 DECLARE_SSID_BUF(ssid
);
2017 * TBD: BSSID is usually 00:00:00:00:00:00 here and not
2018 * an actual MAC of the AP. Seems like FW sets this
2019 * address too late. Read it later and expose through
2020 * /proc or schedule a later task to query and update
2023 essid_len
= IW_ESSID_MAX_SIZE
;
2024 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_SSID
,
2027 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2033 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_CURRENT_TX_RATE
, &txrate
, &len
);
2035 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2041 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_OUR_FREQ
, &chan
, &len
);
2043 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2048 ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_AP_BSSID
, &bssid
, &len
);
2050 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2054 memcpy(priv
->ieee
->bssid
, bssid
, ETH_ALEN
);
2057 case TX_RATE_1_MBIT
:
2058 txratename
= "1Mbps";
2060 case TX_RATE_2_MBIT
:
2061 txratename
= "2Mbsp";
2063 case TX_RATE_5_5_MBIT
:
2064 txratename
= "5.5Mbps";
2066 case TX_RATE_11_MBIT
:
2067 txratename
= "11Mbps";
2070 IPW_DEBUG_INFO("Unknown rate: %d\n", txrate
);
2071 txratename
= "unknown rate";
2075 IPW_DEBUG_INFO("%s: Associated with '%s' at %s, channel %d (BSSID=%pM)\n",
2076 priv
->net_dev
->name
, print_ssid(ssid
, essid
, essid_len
),
2077 txratename
, chan
, bssid
);
2079 /* now we copy read ssid into dev */
2080 if (!(priv
->config
& CFG_STATIC_ESSID
)) {
2081 priv
->essid_len
= min((u8
) essid_len
, (u8
) IW_ESSID_MAX_SIZE
);
2082 memcpy(priv
->essid
, essid
, priv
->essid_len
);
2084 priv
->channel
= chan
;
2085 memcpy(priv
->bssid
, bssid
, ETH_ALEN
);
2087 priv
->status
|= STATUS_ASSOCIATING
;
2088 priv
->connect_start
= get_seconds();
2090 schedule_delayed_work(&priv
->wx_event_work
, HZ
/ 10);
2093 static int ipw2100_set_essid(struct ipw2100_priv
*priv
, char *essid
,
2094 int length
, int batch_mode
)
2096 int ssid_len
= min(length
, IW_ESSID_MAX_SIZE
);
2097 struct host_command cmd
= {
2098 .host_command
= SSID
,
2099 .host_command_sequence
= 0,
2100 .host_command_length
= ssid_len
2103 DECLARE_SSID_BUF(ssid
);
2105 IPW_DEBUG_HC("SSID: '%s'\n", print_ssid(ssid
, essid
, ssid_len
));
2108 memcpy(cmd
.host_command_parameters
, essid
, ssid_len
);
2111 err
= ipw2100_disable_adapter(priv
);
2116 /* Bug in FW currently doesn't honor bit 0 in SET_SCAN_OPTIONS to
2117 * disable auto association -- so we cheat by setting a bogus SSID */
2118 if (!ssid_len
&& !(priv
->config
& CFG_ASSOCIATE
)) {
2120 u8
*bogus
= (u8
*) cmd
.host_command_parameters
;
2121 for (i
= 0; i
< IW_ESSID_MAX_SIZE
; i
++)
2122 bogus
[i
] = 0x18 + i
;
2123 cmd
.host_command_length
= IW_ESSID_MAX_SIZE
;
2126 /* NOTE: We always send the SSID command even if the provided ESSID is
2127 * the same as what we currently think is set. */
2129 err
= ipw2100_hw_send_command(priv
, &cmd
);
2131 memset(priv
->essid
+ ssid_len
, 0, IW_ESSID_MAX_SIZE
- ssid_len
);
2132 memcpy(priv
->essid
, essid
, ssid_len
);
2133 priv
->essid_len
= ssid_len
;
2137 if (ipw2100_enable_adapter(priv
))
2144 static void isr_indicate_association_lost(struct ipw2100_priv
*priv
, u32 status
)
2146 DECLARE_SSID_BUF(ssid
);
2148 IPW_DEBUG(IPW_DL_NOTIF
| IPW_DL_STATE
| IPW_DL_ASSOC
,
2149 "disassociated: '%s' %pM\n",
2150 print_ssid(ssid
, priv
->essid
, priv
->essid_len
),
2153 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
2155 if (priv
->status
& STATUS_STOPPING
) {
2156 IPW_DEBUG_INFO("Card is stopping itself, discard ASSN_LOST.\n");
2160 memset(priv
->bssid
, 0, ETH_ALEN
);
2161 memset(priv
->ieee
->bssid
, 0, ETH_ALEN
);
2163 netif_carrier_off(priv
->net_dev
);
2164 netif_stop_queue(priv
->net_dev
);
2166 if (!(priv
->status
& STATUS_RUNNING
))
2169 if (priv
->status
& STATUS_SECURITY_UPDATED
)
2170 schedule_delayed_work(&priv
->security_work
, 0);
2172 schedule_delayed_work(&priv
->wx_event_work
, 0);
2175 static void isr_indicate_rf_kill(struct ipw2100_priv
*priv
, u32 status
)
2177 IPW_DEBUG_INFO("%s: RF Kill state changed to radio OFF.\n",
2178 priv
->net_dev
->name
);
2180 /* RF_KILL is now enabled (else we wouldn't be here) */
2181 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, true);
2182 priv
->status
|= STATUS_RF_KILL_HW
;
2184 /* Make sure the RF Kill check timer is running */
2185 priv
->stop_rf_kill
= 0;
2186 cancel_delayed_work(&priv
->rf_kill
);
2187 schedule_delayed_work(&priv
->rf_kill
, round_jiffies_relative(HZ
));
2190 static void send_scan_event(void *data
)
2192 struct ipw2100_priv
*priv
= data
;
2193 union iwreq_data wrqu
;
2195 wrqu
.data
.length
= 0;
2196 wrqu
.data
.flags
= 0;
2197 wireless_send_event(priv
->net_dev
, SIOCGIWSCAN
, &wrqu
, NULL
);
2200 static void ipw2100_scan_event_later(struct work_struct
*work
)
2202 send_scan_event(container_of(work
, struct ipw2100_priv
,
2203 scan_event_later
.work
));
2206 static void ipw2100_scan_event_now(struct work_struct
*work
)
2208 send_scan_event(container_of(work
, struct ipw2100_priv
,
2212 static void isr_scan_complete(struct ipw2100_priv
*priv
, u32 status
)
2214 IPW_DEBUG_SCAN("scan complete\n");
2215 /* Age the scan results... */
2216 priv
->ieee
->scans
++;
2217 priv
->status
&= ~STATUS_SCANNING
;
2219 /* Only userspace-requested scan completion events go out immediately */
2220 if (!priv
->user_requested_scan
) {
2221 if (!delayed_work_pending(&priv
->scan_event_later
))
2222 schedule_delayed_work(&priv
->scan_event_later
,
2223 round_jiffies_relative(msecs_to_jiffies(4000)));
2225 priv
->user_requested_scan
= 0;
2226 cancel_delayed_work(&priv
->scan_event_later
);
2227 schedule_work(&priv
->scan_event_now
);
2231 #ifdef CONFIG_IPW2100_DEBUG
2232 #define IPW2100_HANDLER(v, f) { v, f, # v }
2233 struct ipw2100_status_indicator
{
2235 void (*cb
) (struct ipw2100_priv
* priv
, u32 status
);
2239 #define IPW2100_HANDLER(v, f) { v, f }
2240 struct ipw2100_status_indicator
{
2242 void (*cb
) (struct ipw2100_priv
* priv
, u32 status
);
2244 #endif /* CONFIG_IPW2100_DEBUG */
2246 static void isr_indicate_scanning(struct ipw2100_priv
*priv
, u32 status
)
2248 IPW_DEBUG_SCAN("Scanning...\n");
2249 priv
->status
|= STATUS_SCANNING
;
2252 static const struct ipw2100_status_indicator status_handlers
[] = {
2253 IPW2100_HANDLER(IPW_STATE_INITIALIZED
, NULL
),
2254 IPW2100_HANDLER(IPW_STATE_COUNTRY_FOUND
, NULL
),
2255 IPW2100_HANDLER(IPW_STATE_ASSOCIATED
, isr_indicate_associated
),
2256 IPW2100_HANDLER(IPW_STATE_ASSN_LOST
, isr_indicate_association_lost
),
2257 IPW2100_HANDLER(IPW_STATE_ASSN_CHANGED
, NULL
),
2258 IPW2100_HANDLER(IPW_STATE_SCAN_COMPLETE
, isr_scan_complete
),
2259 IPW2100_HANDLER(IPW_STATE_ENTERED_PSP
, NULL
),
2260 IPW2100_HANDLER(IPW_STATE_LEFT_PSP
, NULL
),
2261 IPW2100_HANDLER(IPW_STATE_RF_KILL
, isr_indicate_rf_kill
),
2262 IPW2100_HANDLER(IPW_STATE_DISABLED
, NULL
),
2263 IPW2100_HANDLER(IPW_STATE_POWER_DOWN
, NULL
),
2264 IPW2100_HANDLER(IPW_STATE_SCANNING
, isr_indicate_scanning
),
2265 IPW2100_HANDLER(-1, NULL
)
2268 static void isr_status_change(struct ipw2100_priv
*priv
, int status
)
2272 if (status
== IPW_STATE_SCANNING
&&
2273 priv
->status
& STATUS_ASSOCIATED
&&
2274 !(priv
->status
& STATUS_SCANNING
)) {
2275 IPW_DEBUG_INFO("Scan detected while associated, with "
2276 "no scan request. Restarting firmware.\n");
2278 /* Wake up any sleeping jobs */
2279 schedule_reset(priv
);
2282 for (i
= 0; status_handlers
[i
].status
!= -1; i
++) {
2283 if (status
== status_handlers
[i
].status
) {
2284 IPW_DEBUG_NOTIF("Status change: %s\n",
2285 status_handlers
[i
].name
);
2286 if (status_handlers
[i
].cb
)
2287 status_handlers
[i
].cb(priv
, status
);
2288 priv
->wstats
.status
= status
;
2293 IPW_DEBUG_NOTIF("unknown status received: %04x\n", status
);
2296 static void isr_rx_complete_command(struct ipw2100_priv
*priv
,
2297 struct ipw2100_cmd_header
*cmd
)
2299 #ifdef CONFIG_IPW2100_DEBUG
2300 if (cmd
->host_command_reg
< ARRAY_SIZE(command_types
)) {
2301 IPW_DEBUG_HC("Command completed '%s (%d)'\n",
2302 command_types
[cmd
->host_command_reg
],
2303 cmd
->host_command_reg
);
2306 if (cmd
->host_command_reg
== HOST_COMPLETE
)
2307 priv
->status
|= STATUS_ENABLED
;
2309 if (cmd
->host_command_reg
== CARD_DISABLE
)
2310 priv
->status
&= ~STATUS_ENABLED
;
2312 priv
->status
&= ~STATUS_CMD_ACTIVE
;
2314 wake_up_interruptible(&priv
->wait_command_queue
);
2317 #ifdef CONFIG_IPW2100_DEBUG
2318 static const char *frame_types
[] = {
2319 "COMMAND_STATUS_VAL",
2320 "STATUS_CHANGE_VAL",
2323 "HOST_NOTIFICATION_VAL"
2327 static int ipw2100_alloc_skb(struct ipw2100_priv
*priv
,
2328 struct ipw2100_rx_packet
*packet
)
2330 packet
->skb
= dev_alloc_skb(sizeof(struct ipw2100_rx
));
2334 packet
->rxp
= (struct ipw2100_rx
*)packet
->skb
->data
;
2335 packet
->dma_addr
= pci_map_single(priv
->pci_dev
, packet
->skb
->data
,
2336 sizeof(struct ipw2100_rx
),
2337 PCI_DMA_FROMDEVICE
);
2338 /* NOTE: pci_map_single does not return an error code, and 0 is a valid
2344 #define SEARCH_ERROR 0xffffffff
2345 #define SEARCH_FAIL 0xfffffffe
2346 #define SEARCH_SUCCESS 0xfffffff0
2347 #define SEARCH_DISCARD 0
2348 #define SEARCH_SNAPSHOT 1
2350 #define SNAPSHOT_ADDR(ofs) (priv->snapshot[((ofs) >> 12) & 0xff] + ((ofs) & 0xfff))
2351 static void ipw2100_snapshot_free(struct ipw2100_priv
*priv
)
2354 if (!priv
->snapshot
[0])
2356 for (i
= 0; i
< 0x30; i
++)
2357 kfree(priv
->snapshot
[i
]);
2358 priv
->snapshot
[0] = NULL
;
2361 #ifdef IPW2100_DEBUG_C3
2362 static int ipw2100_snapshot_alloc(struct ipw2100_priv
*priv
)
2365 if (priv
->snapshot
[0])
2367 for (i
= 0; i
< 0x30; i
++) {
2368 priv
->snapshot
[i
] = kmalloc(0x1000, GFP_ATOMIC
);
2369 if (!priv
->snapshot
[i
]) {
2370 IPW_DEBUG_INFO("%s: Error allocating snapshot "
2371 "buffer %d\n", priv
->net_dev
->name
, i
);
2373 kfree(priv
->snapshot
[--i
]);
2374 priv
->snapshot
[0] = NULL
;
2382 static u32
ipw2100_match_buf(struct ipw2100_priv
*priv
, u8
* in_buf
,
2383 size_t len
, int mode
)
2391 if (mode
== SEARCH_SNAPSHOT
) {
2392 if (!ipw2100_snapshot_alloc(priv
))
2393 mode
= SEARCH_DISCARD
;
2396 for (ret
= SEARCH_FAIL
, i
= 0; i
< 0x30000; i
+= 4) {
2397 read_nic_dword(priv
->net_dev
, i
, &tmp
);
2398 if (mode
== SEARCH_SNAPSHOT
)
2399 *(u32
*) SNAPSHOT_ADDR(i
) = tmp
;
2400 if (ret
== SEARCH_FAIL
) {
2402 for (j
= 0; j
< 4; j
++) {
2411 if ((s
- in_buf
) == len
)
2412 ret
= (i
+ j
) - len
+ 1;
2414 } else if (mode
== SEARCH_DISCARD
)
2424 * 0) Disconnect the SKB from the firmware (just unmap)
2425 * 1) Pack the ETH header into the SKB
2426 * 2) Pass the SKB to the network stack
2428 * When packet is provided by the firmware, it contains the following:
2433 * The size of the constructed ethernet
2436 #ifdef IPW2100_RX_DEBUG
2437 static u8 packet_data
[IPW_RX_NIC_BUFFER_LENGTH
];
2440 static void ipw2100_corruption_detected(struct ipw2100_priv
*priv
, int i
)
2442 #ifdef IPW2100_DEBUG_C3
2443 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2448 IPW_DEBUG_INFO(": PCI latency error detected at 0x%04zX.\n",
2449 i
* sizeof(struct ipw2100_status
));
2451 #ifdef IPW2100_DEBUG_C3
2452 /* Halt the firmware so we can get a good image */
2453 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
2454 IPW_AUX_HOST_RESET_REG_STOP_MASTER
);
2457 udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY
);
2458 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, ®
);
2460 if (reg
& IPW_AUX_HOST_RESET_REG_MASTER_DISABLED
)
2464 match
= ipw2100_match_buf(priv
, (u8
*) status
,
2465 sizeof(struct ipw2100_status
),
2467 if (match
< SEARCH_SUCCESS
)
2468 IPW_DEBUG_INFO("%s: DMA status match in Firmware at "
2469 "offset 0x%06X, length %d:\n",
2470 priv
->net_dev
->name
, match
,
2471 sizeof(struct ipw2100_status
));
2473 IPW_DEBUG_INFO("%s: No DMA status match in "
2474 "Firmware.\n", priv
->net_dev
->name
);
2476 printk_buf((u8
*) priv
->status_queue
.drv
,
2477 sizeof(struct ipw2100_status
) * RX_QUEUE_LENGTH
);
2480 priv
->fatal_error
= IPW2100_ERR_C3_CORRUPTION
;
2481 priv
->net_dev
->stats
.rx_errors
++;
2482 schedule_reset(priv
);
2485 static void isr_rx(struct ipw2100_priv
*priv
, int i
,
2486 struct libipw_rx_stats
*stats
)
2488 struct net_device
*dev
= priv
->net_dev
;
2489 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2490 struct ipw2100_rx_packet
*packet
= &priv
->rx_buffers
[i
];
2492 IPW_DEBUG_RX("Handler...\n");
2494 if (unlikely(status
->frame_size
> skb_tailroom(packet
->skb
))) {
2495 IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
2498 status
->frame_size
, skb_tailroom(packet
->skb
));
2499 dev
->stats
.rx_errors
++;
2503 if (unlikely(!netif_running(dev
))) {
2504 dev
->stats
.rx_errors
++;
2505 priv
->wstats
.discard
.misc
++;
2506 IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
2510 if (unlikely(priv
->ieee
->iw_mode
!= IW_MODE_MONITOR
&&
2511 !(priv
->status
& STATUS_ASSOCIATED
))) {
2512 IPW_DEBUG_DROP("Dropping packet while not associated.\n");
2513 priv
->wstats
.discard
.misc
++;
2517 pci_unmap_single(priv
->pci_dev
,
2519 sizeof(struct ipw2100_rx
), PCI_DMA_FROMDEVICE
);
2521 skb_put(packet
->skb
, status
->frame_size
);
2523 #ifdef IPW2100_RX_DEBUG
2524 /* Make a copy of the frame so we can dump it to the logs if
2525 * libipw_rx fails */
2526 skb_copy_from_linear_data(packet
->skb
, packet_data
,
2527 min_t(u32
, status
->frame_size
,
2528 IPW_RX_NIC_BUFFER_LENGTH
));
2531 if (!libipw_rx(priv
->ieee
, packet
->skb
, stats
)) {
2532 #ifdef IPW2100_RX_DEBUG
2533 IPW_DEBUG_DROP("%s: Non consumed packet:\n",
2535 printk_buf(IPW_DL_DROP
, packet_data
, status
->frame_size
);
2537 dev
->stats
.rx_errors
++;
2539 /* libipw_rx failed, so it didn't free the SKB */
2540 dev_kfree_skb_any(packet
->skb
);
2544 /* We need to allocate a new SKB and attach it to the RDB. */
2545 if (unlikely(ipw2100_alloc_skb(priv
, packet
))) {
2546 printk(KERN_WARNING DRV_NAME
": "
2547 "%s: Unable to allocate SKB onto RBD ring - disabling "
2548 "adapter.\n", dev
->name
);
2549 /* TODO: schedule adapter shutdown */
2550 IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
2553 /* Update the RDB entry */
2554 priv
->rx_queue
.drv
[i
].host_addr
= packet
->dma_addr
;
2557 #ifdef CONFIG_IPW2100_MONITOR
2559 static void isr_rx_monitor(struct ipw2100_priv
*priv
, int i
,
2560 struct libipw_rx_stats
*stats
)
2562 struct net_device
*dev
= priv
->net_dev
;
2563 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2564 struct ipw2100_rx_packet
*packet
= &priv
->rx_buffers
[i
];
2566 /* Magic struct that slots into the radiotap header -- no reason
2567 * to build this manually element by element, we can write it much
2568 * more efficiently than we can parse it. ORDER MATTERS HERE */
2570 struct ieee80211_radiotap_header rt_hdr
;
2571 s8 rt_dbmsignal
; /* signal in dbM, kluged to signed */
2574 IPW_DEBUG_RX("Handler...\n");
2576 if (unlikely(status
->frame_size
> skb_tailroom(packet
->skb
) -
2577 sizeof(struct ipw_rt_hdr
))) {
2578 IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
2582 skb_tailroom(packet
->skb
));
2583 dev
->stats
.rx_errors
++;
2587 if (unlikely(!netif_running(dev
))) {
2588 dev
->stats
.rx_errors
++;
2589 priv
->wstats
.discard
.misc
++;
2590 IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
2594 if (unlikely(priv
->config
& CFG_CRC_CHECK
&&
2595 status
->flags
& IPW_STATUS_FLAG_CRC_ERROR
)) {
2596 IPW_DEBUG_RX("CRC error in packet. Dropping.\n");
2597 dev
->stats
.rx_errors
++;
2601 pci_unmap_single(priv
->pci_dev
, packet
->dma_addr
,
2602 sizeof(struct ipw2100_rx
), PCI_DMA_FROMDEVICE
);
2603 memmove(packet
->skb
->data
+ sizeof(struct ipw_rt_hdr
),
2604 packet
->skb
->data
, status
->frame_size
);
2606 ipw_rt
= (struct ipw_rt_hdr
*) packet
->skb
->data
;
2608 ipw_rt
->rt_hdr
.it_version
= PKTHDR_RADIOTAP_VERSION
;
2609 ipw_rt
->rt_hdr
.it_pad
= 0; /* always good to zero */
2610 ipw_rt
->rt_hdr
.it_len
= cpu_to_le16(sizeof(struct ipw_rt_hdr
)); /* total hdr+data */
2612 ipw_rt
->rt_hdr
.it_present
= cpu_to_le32(1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL
);
2614 ipw_rt
->rt_dbmsignal
= status
->rssi
+ IPW2100_RSSI_TO_DBM
;
2616 skb_put(packet
->skb
, status
->frame_size
+ sizeof(struct ipw_rt_hdr
));
2618 if (!libipw_rx(priv
->ieee
, packet
->skb
, stats
)) {
2619 dev
->stats
.rx_errors
++;
2621 /* libipw_rx failed, so it didn't free the SKB */
2622 dev_kfree_skb_any(packet
->skb
);
2626 /* We need to allocate a new SKB and attach it to the RDB. */
2627 if (unlikely(ipw2100_alloc_skb(priv
, packet
))) {
2629 "%s: Unable to allocate SKB onto RBD ring - disabling "
2630 "adapter.\n", dev
->name
);
2631 /* TODO: schedule adapter shutdown */
2632 IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
2635 /* Update the RDB entry */
2636 priv
->rx_queue
.drv
[i
].host_addr
= packet
->dma_addr
;
2641 static int ipw2100_corruption_check(struct ipw2100_priv
*priv
, int i
)
2643 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2644 struct ipw2100_rx
*u
= priv
->rx_buffers
[i
].rxp
;
2645 u16 frame_type
= status
->status_fields
& STATUS_TYPE_MASK
;
2647 switch (frame_type
) {
2648 case COMMAND_STATUS_VAL
:
2649 return (status
->frame_size
!= sizeof(u
->rx_data
.command
));
2650 case STATUS_CHANGE_VAL
:
2651 return (status
->frame_size
!= sizeof(u
->rx_data
.status
));
2652 case HOST_NOTIFICATION_VAL
:
2653 return (status
->frame_size
< sizeof(u
->rx_data
.notification
));
2654 case P80211_DATA_VAL
:
2655 case P8023_DATA_VAL
:
2656 #ifdef CONFIG_IPW2100_MONITOR
2659 switch (WLAN_FC_GET_TYPE(le16_to_cpu(u
->rx_data
.header
.frame_ctl
))) {
2660 case IEEE80211_FTYPE_MGMT
:
2661 case IEEE80211_FTYPE_CTL
:
2663 case IEEE80211_FTYPE_DATA
:
2664 return (status
->frame_size
>
2665 IPW_MAX_802_11_PAYLOAD_LENGTH
);
2674 * ipw2100 interrupts are disabled at this point, and the ISR
2675 * is the only code that calls this method. So, we do not need
2676 * to play with any locks.
2678 * RX Queue works as follows:
2680 * Read index - firmware places packet in entry identified by the
2681 * Read index and advances Read index. In this manner,
2682 * Read index will always point to the next packet to
2683 * be filled--but not yet valid.
2685 * Write index - driver fills this entry with an unused RBD entry.
2686 * This entry has not filled by the firmware yet.
2688 * In between the W and R indexes are the RBDs that have been received
2689 * but not yet processed.
2691 * The process of handling packets will start at WRITE + 1 and advance
2692 * until it reaches the READ index.
2694 * The WRITE index is cached in the variable 'priv->rx_queue.next'.
2697 static void __ipw2100_rx_process(struct ipw2100_priv
*priv
)
2699 struct ipw2100_bd_queue
*rxq
= &priv
->rx_queue
;
2700 struct ipw2100_status_queue
*sq
= &priv
->status_queue
;
2701 struct ipw2100_rx_packet
*packet
;
2704 struct ipw2100_rx
*u
;
2705 struct libipw_rx_stats stats
= {
2706 .mac_time
= jiffies
,
2709 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_RX_READ_INDEX
, &r
);
2710 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_RX_WRITE_INDEX
, &w
);
2712 if (r
>= rxq
->entries
) {
2713 IPW_DEBUG_RX("exit - bad read index\n");
2717 i
= (rxq
->next
+ 1) % rxq
->entries
;
2720 /* IPW_DEBUG_RX("r = %d : w = %d : processing = %d\n",
2721 r, rxq->next, i); */
2723 packet
= &priv
->rx_buffers
[i
];
2725 /* Sync the DMA for the RX buffer so CPU is sure to get
2726 * the correct values */
2727 pci_dma_sync_single_for_cpu(priv
->pci_dev
, packet
->dma_addr
,
2728 sizeof(struct ipw2100_rx
),
2729 PCI_DMA_FROMDEVICE
);
2731 if (unlikely(ipw2100_corruption_check(priv
, i
))) {
2732 ipw2100_corruption_detected(priv
, i
);
2737 frame_type
= sq
->drv
[i
].status_fields
& STATUS_TYPE_MASK
;
2738 stats
.rssi
= sq
->drv
[i
].rssi
+ IPW2100_RSSI_TO_DBM
;
2739 stats
.len
= sq
->drv
[i
].frame_size
;
2742 if (stats
.rssi
!= 0)
2743 stats
.mask
|= LIBIPW_STATMASK_RSSI
;
2744 stats
.freq
= LIBIPW_24GHZ_BAND
;
2746 IPW_DEBUG_RX("%s: '%s' frame type received (%d).\n",
2747 priv
->net_dev
->name
, frame_types
[frame_type
],
2750 switch (frame_type
) {
2751 case COMMAND_STATUS_VAL
:
2752 /* Reset Rx watchdog */
2753 isr_rx_complete_command(priv
, &u
->rx_data
.command
);
2756 case STATUS_CHANGE_VAL
:
2757 isr_status_change(priv
, u
->rx_data
.status
);
2760 case P80211_DATA_VAL
:
2761 case P8023_DATA_VAL
:
2762 #ifdef CONFIG_IPW2100_MONITOR
2763 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
) {
2764 isr_rx_monitor(priv
, i
, &stats
);
2768 if (stats
.len
< sizeof(struct libipw_hdr_3addr
))
2770 switch (WLAN_FC_GET_TYPE(le16_to_cpu(u
->rx_data
.header
.frame_ctl
))) {
2771 case IEEE80211_FTYPE_MGMT
:
2772 libipw_rx_mgt(priv
->ieee
,
2773 &u
->rx_data
.header
, &stats
);
2776 case IEEE80211_FTYPE_CTL
:
2779 case IEEE80211_FTYPE_DATA
:
2780 isr_rx(priv
, i
, &stats
);
2788 /* clear status field associated with this RBD */
2789 rxq
->drv
[i
].status
.info
.field
= 0;
2791 i
= (i
+ 1) % rxq
->entries
;
2795 /* backtrack one entry, wrapping to end if at 0 */
2796 rxq
->next
= (i
? i
: rxq
->entries
) - 1;
2798 write_register(priv
->net_dev
,
2799 IPW_MEM_HOST_SHARED_RX_WRITE_INDEX
, rxq
->next
);
2804 * __ipw2100_tx_process
2806 * This routine will determine whether the next packet on
2807 * the fw_pend_list has been processed by the firmware yet.
2809 * If not, then it does nothing and returns.
2811 * If so, then it removes the item from the fw_pend_list, frees
2812 * any associated storage, and places the item back on the
2813 * free list of its source (either msg_free_list or tx_free_list)
2815 * TX Queue works as follows:
2817 * Read index - points to the next TBD that the firmware will
2818 * process. The firmware will read the data, and once
2819 * done processing, it will advance the Read index.
2821 * Write index - driver fills this entry with an constructed TBD
2822 * entry. The Write index is not advanced until the
2823 * packet has been configured.
2825 * In between the W and R indexes are the TBDs that have NOT been
2826 * processed. Lagging behind the R index are packets that have
2827 * been processed but have not been freed by the driver.
2829 * In order to free old storage, an internal index will be maintained
2830 * that points to the next packet to be freed. When all used
2831 * packets have been freed, the oldest index will be the same as the
2832 * firmware's read index.
2834 * The OLDEST index is cached in the variable 'priv->tx_queue.oldest'
2836 * Because the TBD structure can not contain arbitrary data, the
2837 * driver must keep an internal queue of cached allocations such that
2838 * it can put that data back into the tx_free_list and msg_free_list
2839 * for use by future command and data packets.
2842 static int __ipw2100_tx_process(struct ipw2100_priv
*priv
)
2844 struct ipw2100_bd_queue
*txq
= &priv
->tx_queue
;
2845 struct ipw2100_bd
*tbd
;
2846 struct list_head
*element
;
2847 struct ipw2100_tx_packet
*packet
;
2848 int descriptors_used
;
2850 u32 r
, w
, frag_num
= 0;
2852 if (list_empty(&priv
->fw_pend_list
))
2855 element
= priv
->fw_pend_list
.next
;
2857 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
2858 tbd
= &txq
->drv
[packet
->index
];
2860 /* Determine how many TBD entries must be finished... */
2861 switch (packet
->type
) {
2863 /* COMMAND uses only one slot; don't advance */
2864 descriptors_used
= 1;
2869 /* DATA uses two slots; advance and loop position. */
2870 descriptors_used
= tbd
->num_fragments
;
2871 frag_num
= tbd
->num_fragments
- 1;
2872 e
= txq
->oldest
+ frag_num
;
2877 printk(KERN_WARNING DRV_NAME
": %s: Bad fw_pend_list entry!\n",
2878 priv
->net_dev
->name
);
2882 /* if the last TBD is not done by NIC yet, then packet is
2883 * not ready to be released.
2886 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX
,
2888 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
,
2891 printk(KERN_WARNING DRV_NAME
": %s: write index mismatch\n",
2892 priv
->net_dev
->name
);
2895 * txq->next is the index of the last packet written txq->oldest is
2896 * the index of the r is the index of the next packet to be read by
2901 * Quick graphic to help you visualize the following
2902 * if / else statement
2904 * ===>| s---->|===============
2906 * | a | b | c | d | e | f | g | h | i | j | k | l
2910 * w - updated by driver
2911 * r - updated by firmware
2912 * s - start of oldest BD entry (txq->oldest)
2913 * e - end of oldest BD entry
2916 if (!((r
<= w
&& (e
< r
|| e
>= w
)) || (e
< r
&& e
>= w
))) {
2917 IPW_DEBUG_TX("exit - no processed packets ready to release.\n");
2922 DEC_STAT(&priv
->fw_pend_stat
);
2924 #ifdef CONFIG_IPW2100_DEBUG
2927 IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i
,
2929 (u32
) (txq
->nic
+ i
* sizeof(struct ipw2100_bd
)),
2930 txq
->drv
[i
].host_addr
, txq
->drv
[i
].buf_length
);
2932 if (packet
->type
== DATA
) {
2933 i
= (i
+ 1) % txq
->entries
;
2935 IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i
,
2937 (u32
) (txq
->nic
+ i
*
2938 sizeof(struct ipw2100_bd
)),
2939 (u32
) txq
->drv
[i
].host_addr
,
2940 txq
->drv
[i
].buf_length
);
2945 switch (packet
->type
) {
2947 if (txq
->drv
[txq
->oldest
].status
.info
.fields
.txType
!= 0)
2948 printk(KERN_WARNING DRV_NAME
": %s: Queue mismatch. "
2949 "Expecting DATA TBD but pulled "
2950 "something else: ids %d=%d.\n",
2951 priv
->net_dev
->name
, txq
->oldest
, packet
->index
);
2953 /* DATA packet; we have to unmap and free the SKB */
2954 for (i
= 0; i
< frag_num
; i
++) {
2955 tbd
= &txq
->drv
[(packet
->index
+ 1 + i
) % txq
->entries
];
2957 IPW_DEBUG_TX("TX%d P=%08x L=%d\n",
2958 (packet
->index
+ 1 + i
) % txq
->entries
,
2959 tbd
->host_addr
, tbd
->buf_length
);
2961 pci_unmap_single(priv
->pci_dev
,
2963 tbd
->buf_length
, PCI_DMA_TODEVICE
);
2966 libipw_txb_free(packet
->info
.d_struct
.txb
);
2967 packet
->info
.d_struct
.txb
= NULL
;
2969 list_add_tail(element
, &priv
->tx_free_list
);
2970 INC_STAT(&priv
->tx_free_stat
);
2972 /* We have a free slot in the Tx queue, so wake up the
2973 * transmit layer if it is stopped. */
2974 if (priv
->status
& STATUS_ASSOCIATED
)
2975 netif_wake_queue(priv
->net_dev
);
2977 /* A packet was processed by the hardware, so update the
2979 priv
->net_dev
->trans_start
= jiffies
;
2984 if (txq
->drv
[txq
->oldest
].status
.info
.fields
.txType
!= 1)
2985 printk(KERN_WARNING DRV_NAME
": %s: Queue mismatch. "
2986 "Expecting COMMAND TBD but pulled "
2987 "something else: ids %d=%d.\n",
2988 priv
->net_dev
->name
, txq
->oldest
, packet
->index
);
2990 #ifdef CONFIG_IPW2100_DEBUG
2991 if (packet
->info
.c_struct
.cmd
->host_command_reg
<
2992 ARRAY_SIZE(command_types
))
2993 IPW_DEBUG_TX("Command '%s (%d)' processed: %d.\n",
2994 command_types
[packet
->info
.c_struct
.cmd
->
2996 packet
->info
.c_struct
.cmd
->
2998 packet
->info
.c_struct
.cmd
->cmd_status_reg
);
3001 list_add_tail(element
, &priv
->msg_free_list
);
3002 INC_STAT(&priv
->msg_free_stat
);
3006 /* advance oldest used TBD pointer to start of next entry */
3007 txq
->oldest
= (e
+ 1) % txq
->entries
;
3008 /* increase available TBDs number */
3009 txq
->available
+= descriptors_used
;
3010 SET_STAT(&priv
->txq_stat
, txq
->available
);
3012 IPW_DEBUG_TX("packet latency (send to process) %ld jiffies\n",
3013 jiffies
- packet
->jiffy_start
);
3015 return (!list_empty(&priv
->fw_pend_list
));
3018 static inline void __ipw2100_tx_complete(struct ipw2100_priv
*priv
)
3022 while (__ipw2100_tx_process(priv
) && i
< 200)
3026 printk(KERN_WARNING DRV_NAME
": "
3027 "%s: Driver is running slow (%d iters).\n",
3028 priv
->net_dev
->name
, i
);
3032 static void ipw2100_tx_send_commands(struct ipw2100_priv
*priv
)
3034 struct list_head
*element
;
3035 struct ipw2100_tx_packet
*packet
;
3036 struct ipw2100_bd_queue
*txq
= &priv
->tx_queue
;
3037 struct ipw2100_bd
*tbd
;
3038 int next
= txq
->next
;
3040 while (!list_empty(&priv
->msg_pend_list
)) {
3041 /* if there isn't enough space in TBD queue, then
3042 * don't stuff a new one in.
3043 * NOTE: 3 are needed as a command will take one,
3044 * and there is a minimum of 2 that must be
3045 * maintained between the r and w indexes
3047 if (txq
->available
<= 3) {
3048 IPW_DEBUG_TX("no room in tx_queue\n");
3052 element
= priv
->msg_pend_list
.next
;
3054 DEC_STAT(&priv
->msg_pend_stat
);
3056 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
3058 IPW_DEBUG_TX("using TBD at virt=%p, phys=%04X\n",
3059 &txq
->drv
[txq
->next
],
3060 (u32
) (txq
->nic
+ txq
->next
*
3061 sizeof(struct ipw2100_bd
)));
3063 packet
->index
= txq
->next
;
3065 tbd
= &txq
->drv
[txq
->next
];
3067 /* initialize TBD */
3068 tbd
->host_addr
= packet
->info
.c_struct
.cmd_phys
;
3069 tbd
->buf_length
= sizeof(struct ipw2100_cmd_header
);
3070 /* not marking number of fragments causes problems
3071 * with f/w debug version */
3072 tbd
->num_fragments
= 1;
3073 tbd
->status
.info
.field
=
3074 IPW_BD_STATUS_TX_FRAME_COMMAND
|
3075 IPW_BD_STATUS_TX_INTERRUPT_ENABLE
;
3077 /* update TBD queue counters */
3079 txq
->next
%= txq
->entries
;
3081 DEC_STAT(&priv
->txq_stat
);
3083 list_add_tail(element
, &priv
->fw_pend_list
);
3084 INC_STAT(&priv
->fw_pend_stat
);
3087 if (txq
->next
!= next
) {
3088 /* kick off the DMA by notifying firmware the
3089 * write index has moved; make sure TBD stores are sync'd */
3091 write_register(priv
->net_dev
,
3092 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
,
3098 * ipw2100_tx_send_data
3101 static void ipw2100_tx_send_data(struct ipw2100_priv
*priv
)
3103 struct list_head
*element
;
3104 struct ipw2100_tx_packet
*packet
;
3105 struct ipw2100_bd_queue
*txq
= &priv
->tx_queue
;
3106 struct ipw2100_bd
*tbd
;
3107 int next
= txq
->next
;
3109 struct ipw2100_data_header
*ipw_hdr
;
3110 struct libipw_hdr_3addr
*hdr
;
3112 while (!list_empty(&priv
->tx_pend_list
)) {
3113 /* if there isn't enough space in TBD queue, then
3114 * don't stuff a new one in.
3115 * NOTE: 4 are needed as a data will take two,
3116 * and there is a minimum of 2 that must be
3117 * maintained between the r and w indexes
3119 element
= priv
->tx_pend_list
.next
;
3120 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
3122 if (unlikely(1 + packet
->info
.d_struct
.txb
->nr_frags
>
3124 /* TODO: Support merging buffers if more than
3125 * IPW_MAX_BDS are used */
3126 IPW_DEBUG_INFO("%s: Maximum BD threshold exceeded. "
3127 "Increase fragmentation level.\n",
3128 priv
->net_dev
->name
);
3131 if (txq
->available
<= 3 + packet
->info
.d_struct
.txb
->nr_frags
) {
3132 IPW_DEBUG_TX("no room in tx_queue\n");
3137 DEC_STAT(&priv
->tx_pend_stat
);
3139 tbd
= &txq
->drv
[txq
->next
];
3141 packet
->index
= txq
->next
;
3143 ipw_hdr
= packet
->info
.d_struct
.data
;
3144 hdr
= (struct libipw_hdr_3addr
*)packet
->info
.d_struct
.txb
->
3147 if (priv
->ieee
->iw_mode
== IW_MODE_INFRA
) {
3148 /* To DS: Addr1 = BSSID, Addr2 = SA,
3150 memcpy(ipw_hdr
->src_addr
, hdr
->addr2
, ETH_ALEN
);
3151 memcpy(ipw_hdr
->dst_addr
, hdr
->addr3
, ETH_ALEN
);
3152 } else if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
3153 /* not From/To DS: Addr1 = DA, Addr2 = SA,
3155 memcpy(ipw_hdr
->src_addr
, hdr
->addr2
, ETH_ALEN
);
3156 memcpy(ipw_hdr
->dst_addr
, hdr
->addr1
, ETH_ALEN
);
3159 ipw_hdr
->host_command_reg
= SEND
;
3160 ipw_hdr
->host_command_reg1
= 0;
3162 /* For now we only support host based encryption */
3163 ipw_hdr
->needs_encryption
= 0;
3164 ipw_hdr
->encrypted
= packet
->info
.d_struct
.txb
->encrypted
;
3165 if (packet
->info
.d_struct
.txb
->nr_frags
> 1)
3166 ipw_hdr
->fragment_size
=
3167 packet
->info
.d_struct
.txb
->frag_size
-
3170 ipw_hdr
->fragment_size
= 0;
3172 tbd
->host_addr
= packet
->info
.d_struct
.data_phys
;
3173 tbd
->buf_length
= sizeof(struct ipw2100_data_header
);
3174 tbd
->num_fragments
= 1 + packet
->info
.d_struct
.txb
->nr_frags
;
3175 tbd
->status
.info
.field
=
3176 IPW_BD_STATUS_TX_FRAME_802_3
|
3177 IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT
;
3179 txq
->next
%= txq
->entries
;
3181 IPW_DEBUG_TX("data header tbd TX%d P=%08x L=%d\n",
3182 packet
->index
, tbd
->host_addr
, tbd
->buf_length
);
3183 #ifdef CONFIG_IPW2100_DEBUG
3184 if (packet
->info
.d_struct
.txb
->nr_frags
> 1)
3185 IPW_DEBUG_FRAG("fragment Tx: %d frames\n",
3186 packet
->info
.d_struct
.txb
->nr_frags
);
3189 for (i
= 0; i
< packet
->info
.d_struct
.txb
->nr_frags
; i
++) {
3190 tbd
= &txq
->drv
[txq
->next
];
3191 if (i
== packet
->info
.d_struct
.txb
->nr_frags
- 1)
3192 tbd
->status
.info
.field
=
3193 IPW_BD_STATUS_TX_FRAME_802_3
|
3194 IPW_BD_STATUS_TX_INTERRUPT_ENABLE
;
3196 tbd
->status
.info
.field
=
3197 IPW_BD_STATUS_TX_FRAME_802_3
|
3198 IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT
;
3200 tbd
->buf_length
= packet
->info
.d_struct
.txb
->
3201 fragments
[i
]->len
- LIBIPW_3ADDR_LEN
;
3203 tbd
->host_addr
= pci_map_single(priv
->pci_dev
,
3204 packet
->info
.d_struct
.
3211 IPW_DEBUG_TX("data frag tbd TX%d P=%08x L=%d\n",
3212 txq
->next
, tbd
->host_addr
,
3215 pci_dma_sync_single_for_device(priv
->pci_dev
,
3221 txq
->next
%= txq
->entries
;
3224 txq
->available
-= 1 + packet
->info
.d_struct
.txb
->nr_frags
;
3225 SET_STAT(&priv
->txq_stat
, txq
->available
);
3227 list_add_tail(element
, &priv
->fw_pend_list
);
3228 INC_STAT(&priv
->fw_pend_stat
);
3231 if (txq
->next
!= next
) {
3232 /* kick off the DMA by notifying firmware the
3233 * write index has moved; make sure TBD stores are sync'd */
3234 write_register(priv
->net_dev
,
3235 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
,
3240 static void ipw2100_irq_tasklet(struct ipw2100_priv
*priv
)
3242 struct net_device
*dev
= priv
->net_dev
;
3243 unsigned long flags
;
3246 spin_lock_irqsave(&priv
->low_lock
, flags
);
3247 ipw2100_disable_interrupts(priv
);
3249 read_register(dev
, IPW_REG_INTA
, &inta
);
3251 IPW_DEBUG_ISR("enter - INTA: 0x%08lX\n",
3252 (unsigned long)inta
& IPW_INTERRUPT_MASK
);
3257 /* We do not loop and keep polling for more interrupts as this
3258 * is frowned upon and doesn't play nicely with other potentially
3260 IPW_DEBUG_ISR("INTA: 0x%08lX\n",
3261 (unsigned long)inta
& IPW_INTERRUPT_MASK
);
3263 if (inta
& IPW2100_INTA_FATAL_ERROR
) {
3264 printk(KERN_WARNING DRV_NAME
3265 ": Fatal interrupt. Scheduling firmware restart.\n");
3267 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_FATAL_ERROR
);
3269 read_nic_dword(dev
, IPW_NIC_FATAL_ERROR
, &priv
->fatal_error
);
3270 IPW_DEBUG_INFO("%s: Fatal error value: 0x%08X\n",
3271 priv
->net_dev
->name
, priv
->fatal_error
);
3273 read_nic_dword(dev
, IPW_ERROR_ADDR(priv
->fatal_error
), &tmp
);
3274 IPW_DEBUG_INFO("%s: Fatal error address value: 0x%08X\n",
3275 priv
->net_dev
->name
, tmp
);
3277 /* Wake up any sleeping jobs */
3278 schedule_reset(priv
);
3281 if (inta
& IPW2100_INTA_PARITY_ERROR
) {
3282 printk(KERN_ERR DRV_NAME
3283 ": ***** PARITY ERROR INTERRUPT !!!!\n");
3285 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_PARITY_ERROR
);
3288 if (inta
& IPW2100_INTA_RX_TRANSFER
) {
3289 IPW_DEBUG_ISR("RX interrupt\n");
3291 priv
->rx_interrupts
++;
3293 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_RX_TRANSFER
);
3295 __ipw2100_rx_process(priv
);
3296 __ipw2100_tx_complete(priv
);
3299 if (inta
& IPW2100_INTA_TX_TRANSFER
) {
3300 IPW_DEBUG_ISR("TX interrupt\n");
3302 priv
->tx_interrupts
++;
3304 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_TX_TRANSFER
);
3306 __ipw2100_tx_complete(priv
);
3307 ipw2100_tx_send_commands(priv
);
3308 ipw2100_tx_send_data(priv
);
3311 if (inta
& IPW2100_INTA_TX_COMPLETE
) {
3312 IPW_DEBUG_ISR("TX complete\n");
3314 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_TX_COMPLETE
);
3316 __ipw2100_tx_complete(priv
);
3319 if (inta
& IPW2100_INTA_EVENT_INTERRUPT
) {
3320 /* ipw2100_handle_event(dev); */
3322 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_EVENT_INTERRUPT
);
3325 if (inta
& IPW2100_INTA_FW_INIT_DONE
) {
3326 IPW_DEBUG_ISR("FW init done interrupt\n");
3329 read_register(dev
, IPW_REG_INTA
, &tmp
);
3330 if (tmp
& (IPW2100_INTA_FATAL_ERROR
|
3331 IPW2100_INTA_PARITY_ERROR
)) {
3332 write_register(dev
, IPW_REG_INTA
,
3333 IPW2100_INTA_FATAL_ERROR
|
3334 IPW2100_INTA_PARITY_ERROR
);
3337 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_FW_INIT_DONE
);
3340 if (inta
& IPW2100_INTA_STATUS_CHANGE
) {
3341 IPW_DEBUG_ISR("Status change interrupt\n");
3343 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_STATUS_CHANGE
);
3346 if (inta
& IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE
) {
3347 IPW_DEBUG_ISR("slave host mode interrupt\n");
3349 write_register(dev
, IPW_REG_INTA
,
3350 IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE
);
3354 ipw2100_enable_interrupts(priv
);
3356 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
3358 IPW_DEBUG_ISR("exit\n");
3361 static irqreturn_t
ipw2100_interrupt(int irq
, void *data
)
3363 struct ipw2100_priv
*priv
= data
;
3364 u32 inta
, inta_mask
;
3369 spin_lock(&priv
->low_lock
);
3371 /* We check to see if we should be ignoring interrupts before
3372 * we touch the hardware. During ucode load if we try and handle
3373 * an interrupt we can cause keyboard problems as well as cause
3374 * the ucode to fail to initialize */
3375 if (!(priv
->status
& STATUS_INT_ENABLED
)) {
3380 read_register(priv
->net_dev
, IPW_REG_INTA_MASK
, &inta_mask
);
3381 read_register(priv
->net_dev
, IPW_REG_INTA
, &inta
);
3383 if (inta
== 0xFFFFFFFF) {
3384 /* Hardware disappeared */
3385 printk(KERN_WARNING DRV_NAME
": IRQ INTA == 0xFFFFFFFF\n");
3389 inta
&= IPW_INTERRUPT_MASK
;
3391 if (!(inta
& inta_mask
)) {
3392 /* Shared interrupt */
3396 /* We disable the hardware interrupt here just to prevent unneeded
3397 * calls to be made. We disable this again within the actual
3398 * work tasklet, so if another part of the code re-enables the
3399 * interrupt, that is fine */
3400 ipw2100_disable_interrupts(priv
);
3402 tasklet_schedule(&priv
->irq_tasklet
);
3403 spin_unlock(&priv
->low_lock
);
3407 spin_unlock(&priv
->low_lock
);
3411 static netdev_tx_t
ipw2100_tx(struct libipw_txb
*txb
,
3412 struct net_device
*dev
, int pri
)
3414 struct ipw2100_priv
*priv
= libipw_priv(dev
);
3415 struct list_head
*element
;
3416 struct ipw2100_tx_packet
*packet
;
3417 unsigned long flags
;
3419 spin_lock_irqsave(&priv
->low_lock
, flags
);
3421 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
3422 IPW_DEBUG_INFO("Can not transmit when not connected.\n");
3423 priv
->net_dev
->stats
.tx_carrier_errors
++;
3424 netif_stop_queue(dev
);
3428 if (list_empty(&priv
->tx_free_list
))
3431 element
= priv
->tx_free_list
.next
;
3432 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
3434 packet
->info
.d_struct
.txb
= txb
;
3436 IPW_DEBUG_TX("Sending fragment (%d bytes):\n", txb
->fragments
[0]->len
);
3437 printk_buf(IPW_DL_TX
, txb
->fragments
[0]->data
, txb
->fragments
[0]->len
);
3439 packet
->jiffy_start
= jiffies
;
3442 DEC_STAT(&priv
->tx_free_stat
);
3444 list_add_tail(element
, &priv
->tx_pend_list
);
3445 INC_STAT(&priv
->tx_pend_stat
);
3447 ipw2100_tx_send_data(priv
);
3449 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
3450 return NETDEV_TX_OK
;
3453 netif_stop_queue(dev
);
3454 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
3455 return NETDEV_TX_BUSY
;
3458 static int ipw2100_msg_allocate(struct ipw2100_priv
*priv
)
3460 int i
, j
, err
= -EINVAL
;
3465 kmalloc(IPW_COMMAND_POOL_SIZE
* sizeof(struct ipw2100_tx_packet
),
3467 if (!priv
->msg_buffers
) {
3468 printk(KERN_ERR DRV_NAME
": %s: PCI alloc failed for msg "
3469 "buffers.\n", priv
->net_dev
->name
);
3473 for (i
= 0; i
< IPW_COMMAND_POOL_SIZE
; i
++) {
3474 v
= pci_alloc_consistent(priv
->pci_dev
,
3475 sizeof(struct ipw2100_cmd_header
), &p
);
3477 printk(KERN_ERR DRV_NAME
": "
3478 "%s: PCI alloc failed for msg "
3479 "buffers.\n", priv
->net_dev
->name
);
3484 memset(v
, 0, sizeof(struct ipw2100_cmd_header
));
3486 priv
->msg_buffers
[i
].type
= COMMAND
;
3487 priv
->msg_buffers
[i
].info
.c_struct
.cmd
=
3488 (struct ipw2100_cmd_header
*)v
;
3489 priv
->msg_buffers
[i
].info
.c_struct
.cmd_phys
= p
;
3492 if (i
== IPW_COMMAND_POOL_SIZE
)
3495 for (j
= 0; j
< i
; j
++) {
3496 pci_free_consistent(priv
->pci_dev
,
3497 sizeof(struct ipw2100_cmd_header
),
3498 priv
->msg_buffers
[j
].info
.c_struct
.cmd
,
3499 priv
->msg_buffers
[j
].info
.c_struct
.
3503 kfree(priv
->msg_buffers
);
3504 priv
->msg_buffers
= NULL
;
3509 static int ipw2100_msg_initialize(struct ipw2100_priv
*priv
)
3513 INIT_LIST_HEAD(&priv
->msg_free_list
);
3514 INIT_LIST_HEAD(&priv
->msg_pend_list
);
3516 for (i
= 0; i
< IPW_COMMAND_POOL_SIZE
; i
++)
3517 list_add_tail(&priv
->msg_buffers
[i
].list
, &priv
->msg_free_list
);
3518 SET_STAT(&priv
->msg_free_stat
, i
);
3523 static void ipw2100_msg_free(struct ipw2100_priv
*priv
)
3527 if (!priv
->msg_buffers
)
3530 for (i
= 0; i
< IPW_COMMAND_POOL_SIZE
; i
++) {
3531 pci_free_consistent(priv
->pci_dev
,
3532 sizeof(struct ipw2100_cmd_header
),
3533 priv
->msg_buffers
[i
].info
.c_struct
.cmd
,
3534 priv
->msg_buffers
[i
].info
.c_struct
.
3538 kfree(priv
->msg_buffers
);
3539 priv
->msg_buffers
= NULL
;
3542 static ssize_t
show_pci(struct device
*d
, struct device_attribute
*attr
,
3545 struct pci_dev
*pci_dev
= container_of(d
, struct pci_dev
, dev
);
3550 for (i
= 0; i
< 16; i
++) {
3551 out
+= sprintf(out
, "[%08X] ", i
* 16);
3552 for (j
= 0; j
< 16; j
+= 4) {
3553 pci_read_config_dword(pci_dev
, i
* 16 + j
, &val
);
3554 out
+= sprintf(out
, "%08X ", val
);
3556 out
+= sprintf(out
, "\n");
3562 static DEVICE_ATTR(pci
, S_IRUGO
, show_pci
, NULL
);
3564 static ssize_t
show_cfg(struct device
*d
, struct device_attribute
*attr
,
3567 struct ipw2100_priv
*p
= dev_get_drvdata(d
);
3568 return sprintf(buf
, "0x%08x\n", (int)p
->config
);
3571 static DEVICE_ATTR(cfg
, S_IRUGO
, show_cfg
, NULL
);
3573 static ssize_t
show_status(struct device
*d
, struct device_attribute
*attr
,
3576 struct ipw2100_priv
*p
= dev_get_drvdata(d
);
3577 return sprintf(buf
, "0x%08x\n", (int)p
->status
);
3580 static DEVICE_ATTR(status
, S_IRUGO
, show_status
, NULL
);
3582 static ssize_t
show_capability(struct device
*d
, struct device_attribute
*attr
,
3585 struct ipw2100_priv
*p
= dev_get_drvdata(d
);
3586 return sprintf(buf
, "0x%08x\n", (int)p
->capability
);
3589 static DEVICE_ATTR(capability
, S_IRUGO
, show_capability
, NULL
);
3591 #define IPW2100_REG(x) { IPW_ ##x, #x }
3592 static const struct {
3596 IPW2100_REG(REG_GP_CNTRL
),
3597 IPW2100_REG(REG_GPIO
),
3598 IPW2100_REG(REG_INTA
),
3599 IPW2100_REG(REG_INTA_MASK
), IPW2100_REG(REG_RESET_REG
),};
3600 #define IPW2100_NIC(x, s) { x, #x, s }
3601 static const struct {
3606 IPW2100_NIC(IPW2100_CONTROL_REG
, 2),
3607 IPW2100_NIC(0x210014, 1), IPW2100_NIC(0x210000, 1),};
3608 #define IPW2100_ORD(x, d) { IPW_ORD_ ##x, #x, d }
3609 static const struct {
3614 IPW2100_ORD(STAT_TX_HOST_REQUESTS
, "requested Host Tx's (MSDU)"),
3615 IPW2100_ORD(STAT_TX_HOST_COMPLETE
,
3616 "successful Host Tx's (MSDU)"),
3617 IPW2100_ORD(STAT_TX_DIR_DATA
,
3618 "successful Directed Tx's (MSDU)"),
3619 IPW2100_ORD(STAT_TX_DIR_DATA1
,
3620 "successful Directed Tx's (MSDU) @ 1MB"),
3621 IPW2100_ORD(STAT_TX_DIR_DATA2
,
3622 "successful Directed Tx's (MSDU) @ 2MB"),
3623 IPW2100_ORD(STAT_TX_DIR_DATA5_5
,
3624 "successful Directed Tx's (MSDU) @ 5_5MB"),
3625 IPW2100_ORD(STAT_TX_DIR_DATA11
,
3626 "successful Directed Tx's (MSDU) @ 11MB"),
3627 IPW2100_ORD(STAT_TX_NODIR_DATA1
,
3628 "successful Non_Directed Tx's (MSDU) @ 1MB"),
3629 IPW2100_ORD(STAT_TX_NODIR_DATA2
,
3630 "successful Non_Directed Tx's (MSDU) @ 2MB"),
3631 IPW2100_ORD(STAT_TX_NODIR_DATA5_5
,
3632 "successful Non_Directed Tx's (MSDU) @ 5.5MB"),
3633 IPW2100_ORD(STAT_TX_NODIR_DATA11
,
3634 "successful Non_Directed Tx's (MSDU) @ 11MB"),
3635 IPW2100_ORD(STAT_NULL_DATA
, "successful NULL data Tx's"),
3636 IPW2100_ORD(STAT_TX_RTS
, "successful Tx RTS"),
3637 IPW2100_ORD(STAT_TX_CTS
, "successful Tx CTS"),
3638 IPW2100_ORD(STAT_TX_ACK
, "successful Tx ACK"),
3639 IPW2100_ORD(STAT_TX_ASSN
, "successful Association Tx's"),
3640 IPW2100_ORD(STAT_TX_ASSN_RESP
,
3641 "successful Association response Tx's"),
3642 IPW2100_ORD(STAT_TX_REASSN
,
3643 "successful Reassociation Tx's"),
3644 IPW2100_ORD(STAT_TX_REASSN_RESP
,
3645 "successful Reassociation response Tx's"),
3646 IPW2100_ORD(STAT_TX_PROBE
,
3647 "probes successfully transmitted"),
3648 IPW2100_ORD(STAT_TX_PROBE_RESP
,
3649 "probe responses successfully transmitted"),
3650 IPW2100_ORD(STAT_TX_BEACON
, "tx beacon"),
3651 IPW2100_ORD(STAT_TX_ATIM
, "Tx ATIM"),
3652 IPW2100_ORD(STAT_TX_DISASSN
,
3653 "successful Disassociation TX"),
3654 IPW2100_ORD(STAT_TX_AUTH
, "successful Authentication Tx"),
3655 IPW2100_ORD(STAT_TX_DEAUTH
,
3656 "successful Deauthentication TX"),
3657 IPW2100_ORD(STAT_TX_TOTAL_BYTES
,
3658 "Total successful Tx data bytes"),
3659 IPW2100_ORD(STAT_TX_RETRIES
, "Tx retries"),
3660 IPW2100_ORD(STAT_TX_RETRY1
, "Tx retries at 1MBPS"),
3661 IPW2100_ORD(STAT_TX_RETRY2
, "Tx retries at 2MBPS"),
3662 IPW2100_ORD(STAT_TX_RETRY5_5
, "Tx retries at 5.5MBPS"),
3663 IPW2100_ORD(STAT_TX_RETRY11
, "Tx retries at 11MBPS"),
3664 IPW2100_ORD(STAT_TX_FAILURES
, "Tx Failures"),
3665 IPW2100_ORD(STAT_TX_MAX_TRIES_IN_HOP
,
3666 "times max tries in a hop failed"),
3667 IPW2100_ORD(STAT_TX_DISASSN_FAIL
,
3668 "times disassociation failed"),
3669 IPW2100_ORD(STAT_TX_ERR_CTS
, "missed/bad CTS frames"),
3670 IPW2100_ORD(STAT_TX_ERR_ACK
, "tx err due to acks"),
3671 IPW2100_ORD(STAT_RX_HOST
, "packets passed to host"),
3672 IPW2100_ORD(STAT_RX_DIR_DATA
, "directed packets"),
3673 IPW2100_ORD(STAT_RX_DIR_DATA1
, "directed packets at 1MB"),
3674 IPW2100_ORD(STAT_RX_DIR_DATA2
, "directed packets at 2MB"),
3675 IPW2100_ORD(STAT_RX_DIR_DATA5_5
,
3676 "directed packets at 5.5MB"),
3677 IPW2100_ORD(STAT_RX_DIR_DATA11
, "directed packets at 11MB"),
3678 IPW2100_ORD(STAT_RX_NODIR_DATA
, "nondirected packets"),
3679 IPW2100_ORD(STAT_RX_NODIR_DATA1
,
3680 "nondirected packets at 1MB"),
3681 IPW2100_ORD(STAT_RX_NODIR_DATA2
,
3682 "nondirected packets at 2MB"),
3683 IPW2100_ORD(STAT_RX_NODIR_DATA5_5
,
3684 "nondirected packets at 5.5MB"),
3685 IPW2100_ORD(STAT_RX_NODIR_DATA11
,
3686 "nondirected packets at 11MB"),
3687 IPW2100_ORD(STAT_RX_NULL_DATA
, "null data rx's"),
3688 IPW2100_ORD(STAT_RX_RTS
, "Rx RTS"), IPW2100_ORD(STAT_RX_CTS
,
3690 IPW2100_ORD(STAT_RX_ACK
, "Rx ACK"),
3691 IPW2100_ORD(STAT_RX_CFEND
, "Rx CF End"),
3692 IPW2100_ORD(STAT_RX_CFEND_ACK
, "Rx CF End + CF Ack"),
3693 IPW2100_ORD(STAT_RX_ASSN
, "Association Rx's"),
3694 IPW2100_ORD(STAT_RX_ASSN_RESP
, "Association response Rx's"),
3695 IPW2100_ORD(STAT_RX_REASSN
, "Reassociation Rx's"),
3696 IPW2100_ORD(STAT_RX_REASSN_RESP
,
3697 "Reassociation response Rx's"),
3698 IPW2100_ORD(STAT_RX_PROBE
, "probe Rx's"),
3699 IPW2100_ORD(STAT_RX_PROBE_RESP
, "probe response Rx's"),
3700 IPW2100_ORD(STAT_RX_BEACON
, "Rx beacon"),
3701 IPW2100_ORD(STAT_RX_ATIM
, "Rx ATIM"),
3702 IPW2100_ORD(STAT_RX_DISASSN
, "disassociation Rx"),
3703 IPW2100_ORD(STAT_RX_AUTH
, "authentication Rx"),
3704 IPW2100_ORD(STAT_RX_DEAUTH
, "deauthentication Rx"),
3705 IPW2100_ORD(STAT_RX_TOTAL_BYTES
,
3706 "Total rx data bytes received"),
3707 IPW2100_ORD(STAT_RX_ERR_CRC
, "packets with Rx CRC error"),
3708 IPW2100_ORD(STAT_RX_ERR_CRC1
, "Rx CRC errors at 1MB"),
3709 IPW2100_ORD(STAT_RX_ERR_CRC2
, "Rx CRC errors at 2MB"),
3710 IPW2100_ORD(STAT_RX_ERR_CRC5_5
, "Rx CRC errors at 5.5MB"),
3711 IPW2100_ORD(STAT_RX_ERR_CRC11
, "Rx CRC errors at 11MB"),
3712 IPW2100_ORD(STAT_RX_DUPLICATE1
,
3713 "duplicate rx packets at 1MB"),
3714 IPW2100_ORD(STAT_RX_DUPLICATE2
,
3715 "duplicate rx packets at 2MB"),
3716 IPW2100_ORD(STAT_RX_DUPLICATE5_5
,
3717 "duplicate rx packets at 5.5MB"),
3718 IPW2100_ORD(STAT_RX_DUPLICATE11
,
3719 "duplicate rx packets at 11MB"),
3720 IPW2100_ORD(STAT_RX_DUPLICATE
, "duplicate rx packets"),
3721 IPW2100_ORD(PERS_DB_LOCK
, "locking fw permanent db"),
3722 IPW2100_ORD(PERS_DB_SIZE
, "size of fw permanent db"),
3723 IPW2100_ORD(PERS_DB_ADDR
, "address of fw permanent db"),
3724 IPW2100_ORD(STAT_RX_INVALID_PROTOCOL
,
3725 "rx frames with invalid protocol"),
3726 IPW2100_ORD(SYS_BOOT_TIME
, "Boot time"),
3727 IPW2100_ORD(STAT_RX_NO_BUFFER
,
3728 "rx frames rejected due to no buffer"),
3729 IPW2100_ORD(STAT_RX_MISSING_FRAG
,
3730 "rx frames dropped due to missing fragment"),
3731 IPW2100_ORD(STAT_RX_ORPHAN_FRAG
,
3732 "rx frames dropped due to non-sequential fragment"),
3733 IPW2100_ORD(STAT_RX_ORPHAN_FRAME
,
3734 "rx frames dropped due to unmatched 1st frame"),
3735 IPW2100_ORD(STAT_RX_FRAG_AGEOUT
,
3736 "rx frames dropped due to uncompleted frame"),
3737 IPW2100_ORD(STAT_RX_ICV_ERRORS
,
3738 "ICV errors during decryption"),
3739 IPW2100_ORD(STAT_PSP_SUSPENSION
, "times adapter suspended"),
3740 IPW2100_ORD(STAT_PSP_BCN_TIMEOUT
, "beacon timeout"),
3741 IPW2100_ORD(STAT_PSP_POLL_TIMEOUT
,
3742 "poll response timeouts"),
3743 IPW2100_ORD(STAT_PSP_NONDIR_TIMEOUT
,
3744 "timeouts waiting for last {broad,multi}cast pkt"),
3745 IPW2100_ORD(STAT_PSP_RX_DTIMS
, "PSP DTIMs received"),
3746 IPW2100_ORD(STAT_PSP_RX_TIMS
, "PSP TIMs received"),
3747 IPW2100_ORD(STAT_PSP_STATION_ID
, "PSP Station ID"),
3748 IPW2100_ORD(LAST_ASSN_TIME
, "RTC time of last association"),
3749 IPW2100_ORD(STAT_PERCENT_MISSED_BCNS
,
3750 "current calculation of % missed beacons"),
3751 IPW2100_ORD(STAT_PERCENT_RETRIES
,
3752 "current calculation of % missed tx retries"),
3753 IPW2100_ORD(ASSOCIATED_AP_PTR
,
3754 "0 if not associated, else pointer to AP table entry"),
3755 IPW2100_ORD(AVAILABLE_AP_CNT
,
3756 "AP's decsribed in the AP table"),
3757 IPW2100_ORD(AP_LIST_PTR
, "Ptr to list of available APs"),
3758 IPW2100_ORD(STAT_AP_ASSNS
, "associations"),
3759 IPW2100_ORD(STAT_ASSN_FAIL
, "association failures"),
3760 IPW2100_ORD(STAT_ASSN_RESP_FAIL
,
3761 "failures due to response fail"),
3762 IPW2100_ORD(STAT_FULL_SCANS
, "full scans"),
3763 IPW2100_ORD(CARD_DISABLED
, "Card Disabled"),
3764 IPW2100_ORD(STAT_ROAM_INHIBIT
,
3765 "times roaming was inhibited due to activity"),
3766 IPW2100_ORD(RSSI_AT_ASSN
,
3767 "RSSI of associated AP at time of association"),
3768 IPW2100_ORD(STAT_ASSN_CAUSE1
,
3769 "reassociation: no probe response or TX on hop"),
3770 IPW2100_ORD(STAT_ASSN_CAUSE2
,
3771 "reassociation: poor tx/rx quality"),
3772 IPW2100_ORD(STAT_ASSN_CAUSE3
,
3773 "reassociation: tx/rx quality (excessive AP load"),
3774 IPW2100_ORD(STAT_ASSN_CAUSE4
,
3775 "reassociation: AP RSSI level"),
3776 IPW2100_ORD(STAT_ASSN_CAUSE5
,
3777 "reassociations due to load leveling"),
3778 IPW2100_ORD(STAT_AUTH_FAIL
, "times authentication failed"),
3779 IPW2100_ORD(STAT_AUTH_RESP_FAIL
,
3780 "times authentication response failed"),
3781 IPW2100_ORD(STATION_TABLE_CNT
,
3782 "entries in association table"),
3783 IPW2100_ORD(RSSI_AVG_CURR
, "Current avg RSSI"),
3784 IPW2100_ORD(POWER_MGMT_MODE
, "Power mode - 0=CAM, 1=PSP"),
3785 IPW2100_ORD(COUNTRY_CODE
,
3786 "IEEE country code as recv'd from beacon"),
3787 IPW2100_ORD(COUNTRY_CHANNELS
,
3788 "channels suported by country"),
3789 IPW2100_ORD(RESET_CNT
, "adapter resets (warm)"),
3790 IPW2100_ORD(BEACON_INTERVAL
, "Beacon interval"),
3791 IPW2100_ORD(ANTENNA_DIVERSITY
,
3792 "TRUE if antenna diversity is disabled"),
3793 IPW2100_ORD(DTIM_PERIOD
, "beacon intervals between DTIMs"),
3794 IPW2100_ORD(OUR_FREQ
,
3795 "current radio freq lower digits - channel ID"),
3796 IPW2100_ORD(RTC_TIME
, "current RTC time"),
3797 IPW2100_ORD(PORT_TYPE
, "operating mode"),
3798 IPW2100_ORD(CURRENT_TX_RATE
, "current tx rate"),
3799 IPW2100_ORD(SUPPORTED_RATES
, "supported tx rates"),
3800 IPW2100_ORD(ATIM_WINDOW
, "current ATIM Window"),
3801 IPW2100_ORD(BASIC_RATES
, "basic tx rates"),
3802 IPW2100_ORD(NIC_HIGHEST_RATE
, "NIC highest tx rate"),
3803 IPW2100_ORD(AP_HIGHEST_RATE
, "AP highest tx rate"),
3804 IPW2100_ORD(CAPABILITIES
,
3805 "Management frame capability field"),
3806 IPW2100_ORD(AUTH_TYPE
, "Type of authentication"),
3807 IPW2100_ORD(RADIO_TYPE
, "Adapter card platform type"),
3808 IPW2100_ORD(RTS_THRESHOLD
,
3809 "Min packet length for RTS handshaking"),
3810 IPW2100_ORD(INT_MODE
, "International mode"),
3811 IPW2100_ORD(FRAGMENTATION_THRESHOLD
,
3812 "protocol frag threshold"),
3813 IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_START_ADDRESS
,
3814 "EEPROM offset in SRAM"),
3815 IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_SIZE
,
3816 "EEPROM size in SRAM"),
3817 IPW2100_ORD(EEPROM_SKU_CAPABILITY
, "EEPROM SKU Capability"),
3818 IPW2100_ORD(EEPROM_IBSS_11B_CHANNELS
,
3819 "EEPROM IBSS 11b channel set"),
3820 IPW2100_ORD(MAC_VERSION
, "MAC Version"),
3821 IPW2100_ORD(MAC_REVISION
, "MAC Revision"),
3822 IPW2100_ORD(RADIO_VERSION
, "Radio Version"),
3823 IPW2100_ORD(NIC_MANF_DATE_TIME
, "MANF Date/Time STAMP"),
3824 IPW2100_ORD(UCODE_VERSION
, "Ucode Version"),};
3826 static ssize_t
show_registers(struct device
*d
, struct device_attribute
*attr
,
3830 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3831 struct net_device
*dev
= priv
->net_dev
;
3835 out
+= sprintf(out
, "%30s [Address ] : Hex\n", "Register");
3837 for (i
= 0; i
< ARRAY_SIZE(hw_data
); i
++) {
3838 read_register(dev
, hw_data
[i
].addr
, &val
);
3839 out
+= sprintf(out
, "%30s [%08X] : %08X\n",
3840 hw_data
[i
].name
, hw_data
[i
].addr
, val
);
3846 static DEVICE_ATTR(registers
, S_IRUGO
, show_registers
, NULL
);
3848 static ssize_t
show_hardware(struct device
*d
, struct device_attribute
*attr
,
3851 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3852 struct net_device
*dev
= priv
->net_dev
;
3856 out
+= sprintf(out
, "%30s [Address ] : Hex\n", "NIC entry");
3858 for (i
= 0; i
< ARRAY_SIZE(nic_data
); i
++) {
3863 switch (nic_data
[i
].size
) {
3865 read_nic_byte(dev
, nic_data
[i
].addr
, &tmp8
);
3866 out
+= sprintf(out
, "%30s [%08X] : %02X\n",
3867 nic_data
[i
].name
, nic_data
[i
].addr
,
3871 read_nic_word(dev
, nic_data
[i
].addr
, &tmp16
);
3872 out
+= sprintf(out
, "%30s [%08X] : %04X\n",
3873 nic_data
[i
].name
, nic_data
[i
].addr
,
3877 read_nic_dword(dev
, nic_data
[i
].addr
, &tmp32
);
3878 out
+= sprintf(out
, "%30s [%08X] : %08X\n",
3879 nic_data
[i
].name
, nic_data
[i
].addr
,
3887 static DEVICE_ATTR(hardware
, S_IRUGO
, show_hardware
, NULL
);
3889 static ssize_t
show_memory(struct device
*d
, struct device_attribute
*attr
,
3892 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3893 struct net_device
*dev
= priv
->net_dev
;
3894 static unsigned long loop
= 0;
3900 if (loop
>= 0x30000)
3903 /* sysfs provides us PAGE_SIZE buffer */
3904 while (len
< PAGE_SIZE
- 128 && loop
< 0x30000) {
3906 if (priv
->snapshot
[0])
3907 for (i
= 0; i
< 4; i
++)
3909 *(u32
*) SNAPSHOT_ADDR(loop
+ i
* 4);
3911 for (i
= 0; i
< 4; i
++)
3912 read_nic_dword(dev
, loop
+ i
* 4, &buffer
[i
]);
3915 len
+= sprintf(buf
+ len
,
3920 ((u8
*) buffer
)[0x0],
3921 ((u8
*) buffer
)[0x1],
3922 ((u8
*) buffer
)[0x2],
3923 ((u8
*) buffer
)[0x3],
3924 ((u8
*) buffer
)[0x4],
3925 ((u8
*) buffer
)[0x5],
3926 ((u8
*) buffer
)[0x6],
3927 ((u8
*) buffer
)[0x7],
3928 ((u8
*) buffer
)[0x8],
3929 ((u8
*) buffer
)[0x9],
3930 ((u8
*) buffer
)[0xa],
3931 ((u8
*) buffer
)[0xb],
3932 ((u8
*) buffer
)[0xc],
3933 ((u8
*) buffer
)[0xd],
3934 ((u8
*) buffer
)[0xe],
3935 ((u8
*) buffer
)[0xf]);
3937 len
+= sprintf(buf
+ len
, "%s\n",
3938 snprint_line(line
, sizeof(line
),
3939 (u8
*) buffer
, 16, loop
));
3946 static ssize_t
store_memory(struct device
*d
, struct device_attribute
*attr
,
3947 const char *buf
, size_t count
)
3949 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3950 struct net_device
*dev
= priv
->net_dev
;
3951 const char *p
= buf
;
3953 (void)dev
; /* kill unused-var warning for debug-only code */
3959 (count
>= 2 && tolower(p
[0]) == 'o' && tolower(p
[1]) == 'n')) {
3960 IPW_DEBUG_INFO("%s: Setting memory dump to RAW mode.\n",
3964 } else if (p
[0] == '0' || (count
>= 2 && tolower(p
[0]) == 'o' &&
3965 tolower(p
[1]) == 'f')) {
3966 IPW_DEBUG_INFO("%s: Setting memory dump to HEX mode.\n",
3970 } else if (tolower(p
[0]) == 'r') {
3971 IPW_DEBUG_INFO("%s: Resetting firmware snapshot.\n", dev
->name
);
3972 ipw2100_snapshot_free(priv
);
3975 IPW_DEBUG_INFO("%s: Usage: 0|on = HEX, 1|off = RAW, "
3976 "reset = clear memory snapshot\n", dev
->name
);
3981 static DEVICE_ATTR(memory
, S_IWUSR
| S_IRUGO
, show_memory
, store_memory
);
3983 static ssize_t
show_ordinals(struct device
*d
, struct device_attribute
*attr
,
3986 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3990 static int loop
= 0;
3992 if (priv
->status
& STATUS_RF_KILL_MASK
)
3995 if (loop
>= ARRAY_SIZE(ord_data
))
3998 /* sysfs provides us PAGE_SIZE buffer */
3999 while (len
< PAGE_SIZE
- 128 && loop
< ARRAY_SIZE(ord_data
)) {
4000 val_len
= sizeof(u32
);
4002 if (ipw2100_get_ordinal(priv
, ord_data
[loop
].index
, &val
,
4004 len
+= sprintf(buf
+ len
, "[0x%02X] = ERROR %s\n",
4005 ord_data
[loop
].index
,
4006 ord_data
[loop
].desc
);
4008 len
+= sprintf(buf
+ len
, "[0x%02X] = 0x%08X %s\n",
4009 ord_data
[loop
].index
, val
,
4010 ord_data
[loop
].desc
);
4017 static DEVICE_ATTR(ordinals
, S_IRUGO
, show_ordinals
, NULL
);
4019 static ssize_t
show_stats(struct device
*d
, struct device_attribute
*attr
,
4022 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4025 out
+= sprintf(out
, "interrupts: %d {tx: %d, rx: %d, other: %d}\n",
4026 priv
->interrupts
, priv
->tx_interrupts
,
4027 priv
->rx_interrupts
, priv
->inta_other
);
4028 out
+= sprintf(out
, "firmware resets: %d\n", priv
->resets
);
4029 out
+= sprintf(out
, "firmware hangs: %d\n", priv
->hangs
);
4030 #ifdef CONFIG_IPW2100_DEBUG
4031 out
+= sprintf(out
, "packet mismatch image: %s\n",
4032 priv
->snapshot
[0] ? "YES" : "NO");
4038 static DEVICE_ATTR(stats
, S_IRUGO
, show_stats
, NULL
);
4040 static int ipw2100_switch_mode(struct ipw2100_priv
*priv
, u32 mode
)
4044 if (mode
== priv
->ieee
->iw_mode
)
4047 err
= ipw2100_disable_adapter(priv
);
4049 printk(KERN_ERR DRV_NAME
": %s: Could not disable adapter %d\n",
4050 priv
->net_dev
->name
, err
);
4056 priv
->net_dev
->type
= ARPHRD_ETHER
;
4059 priv
->net_dev
->type
= ARPHRD_ETHER
;
4061 #ifdef CONFIG_IPW2100_MONITOR
4062 case IW_MODE_MONITOR
:
4063 priv
->last_mode
= priv
->ieee
->iw_mode
;
4064 priv
->net_dev
->type
= ARPHRD_IEEE80211_RADIOTAP
;
4066 #endif /* CONFIG_IPW2100_MONITOR */
4069 priv
->ieee
->iw_mode
= mode
;
4072 /* Indicate ipw2100_download_firmware download firmware
4073 * from disk instead of memory. */
4074 ipw2100_firmware
.version
= 0;
4077 printk(KERN_INFO
"%s: Reseting on mode change.\n", priv
->net_dev
->name
);
4078 priv
->reset_backoff
= 0;
4079 schedule_reset(priv
);
4084 static ssize_t
show_internals(struct device
*d
, struct device_attribute
*attr
,
4087 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4090 #define DUMP_VAR(x,y) len += sprintf(buf + len, # x ": %" y "\n", priv-> x)
4092 if (priv
->status
& STATUS_ASSOCIATED
)
4093 len
+= sprintf(buf
+ len
, "connected: %lu\n",
4094 get_seconds() - priv
->connect_start
);
4096 len
+= sprintf(buf
+ len
, "not connected\n");
4098 DUMP_VAR(ieee
->crypt_info
.crypt
[priv
->ieee
->crypt_info
.tx_keyidx
], "p");
4099 DUMP_VAR(status
, "08lx");
4100 DUMP_VAR(config
, "08lx");
4101 DUMP_VAR(capability
, "08lx");
4104 sprintf(buf
+ len
, "last_rtc: %lu\n",
4105 (unsigned long)priv
->last_rtc
);
4107 DUMP_VAR(fatal_error
, "d");
4108 DUMP_VAR(stop_hang_check
, "d");
4109 DUMP_VAR(stop_rf_kill
, "d");
4110 DUMP_VAR(messages_sent
, "d");
4112 DUMP_VAR(tx_pend_stat
.value
, "d");
4113 DUMP_VAR(tx_pend_stat
.hi
, "d");
4115 DUMP_VAR(tx_free_stat
.value
, "d");
4116 DUMP_VAR(tx_free_stat
.lo
, "d");
4118 DUMP_VAR(msg_free_stat
.value
, "d");
4119 DUMP_VAR(msg_free_stat
.lo
, "d");
4121 DUMP_VAR(msg_pend_stat
.value
, "d");
4122 DUMP_VAR(msg_pend_stat
.hi
, "d");
4124 DUMP_VAR(fw_pend_stat
.value
, "d");
4125 DUMP_VAR(fw_pend_stat
.hi
, "d");
4127 DUMP_VAR(txq_stat
.value
, "d");
4128 DUMP_VAR(txq_stat
.lo
, "d");
4130 DUMP_VAR(ieee
->scans
, "d");
4131 DUMP_VAR(reset_backoff
, "d");
4136 static DEVICE_ATTR(internals
, S_IRUGO
, show_internals
, NULL
);
4138 static ssize_t
show_bssinfo(struct device
*d
, struct device_attribute
*attr
,
4141 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4142 char essid
[IW_ESSID_MAX_SIZE
+ 1];
4146 unsigned int length
;
4149 if (priv
->status
& STATUS_RF_KILL_MASK
)
4152 memset(essid
, 0, sizeof(essid
));
4153 memset(bssid
, 0, sizeof(bssid
));
4155 length
= IW_ESSID_MAX_SIZE
;
4156 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_SSID
, essid
, &length
);
4158 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4161 length
= sizeof(bssid
);
4162 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_AP_BSSID
,
4165 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4168 length
= sizeof(u32
);
4169 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_OUR_FREQ
, &chan
, &length
);
4171 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4174 out
+= sprintf(out
, "ESSID: %s\n", essid
);
4175 out
+= sprintf(out
, "BSSID: %pM\n", bssid
);
4176 out
+= sprintf(out
, "Channel: %d\n", chan
);
4181 static DEVICE_ATTR(bssinfo
, S_IRUGO
, show_bssinfo
, NULL
);
4183 #ifdef CONFIG_IPW2100_DEBUG
4184 static ssize_t
show_debug_level(struct device_driver
*d
, char *buf
)
4186 return sprintf(buf
, "0x%08X\n", ipw2100_debug_level
);
4189 static ssize_t
store_debug_level(struct device_driver
*d
,
4190 const char *buf
, size_t count
)
4192 char *p
= (char *)buf
;
4195 if (p
[1] == 'x' || p
[1] == 'X' || p
[0] == 'x' || p
[0] == 'X') {
4197 if (p
[0] == 'x' || p
[0] == 'X')
4199 val
= simple_strtoul(p
, &p
, 16);
4201 val
= simple_strtoul(p
, &p
, 10);
4203 IPW_DEBUG_INFO(": %s is not in hex or decimal form.\n", buf
);
4205 ipw2100_debug_level
= val
;
4207 return strnlen(buf
, count
);
4210 static DRIVER_ATTR(debug_level
, S_IWUSR
| S_IRUGO
, show_debug_level
,
4212 #endif /* CONFIG_IPW2100_DEBUG */
4214 static ssize_t
show_fatal_error(struct device
*d
,
4215 struct device_attribute
*attr
, char *buf
)
4217 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4221 if (priv
->fatal_error
)
4222 out
+= sprintf(out
, "0x%08X\n", priv
->fatal_error
);
4224 out
+= sprintf(out
, "0\n");
4226 for (i
= 1; i
<= IPW2100_ERROR_QUEUE
; i
++) {
4227 if (!priv
->fatal_errors
[(priv
->fatal_index
- i
) %
4228 IPW2100_ERROR_QUEUE
])
4231 out
+= sprintf(out
, "%d. 0x%08X\n", i
,
4232 priv
->fatal_errors
[(priv
->fatal_index
- i
) %
4233 IPW2100_ERROR_QUEUE
]);
4239 static ssize_t
store_fatal_error(struct device
*d
,
4240 struct device_attribute
*attr
, const char *buf
,
4243 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4244 schedule_reset(priv
);
4248 static DEVICE_ATTR(fatal_error
, S_IWUSR
| S_IRUGO
, show_fatal_error
,
4251 static ssize_t
show_scan_age(struct device
*d
, struct device_attribute
*attr
,
4254 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4255 return sprintf(buf
, "%d\n", priv
->ieee
->scan_age
);
4258 static ssize_t
store_scan_age(struct device
*d
, struct device_attribute
*attr
,
4259 const char *buf
, size_t count
)
4261 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4262 struct net_device
*dev
= priv
->net_dev
;
4263 char buffer
[] = "00000000";
4265 (sizeof(buffer
) - 1) > count
? count
: sizeof(buffer
) - 1;
4269 (void)dev
; /* kill unused-var warning for debug-only code */
4271 IPW_DEBUG_INFO("enter\n");
4273 strncpy(buffer
, buf
, len
);
4276 if (p
[1] == 'x' || p
[1] == 'X' || p
[0] == 'x' || p
[0] == 'X') {
4278 if (p
[0] == 'x' || p
[0] == 'X')
4280 val
= simple_strtoul(p
, &p
, 16);
4282 val
= simple_strtoul(p
, &p
, 10);
4284 IPW_DEBUG_INFO("%s: user supplied invalid value.\n", dev
->name
);
4286 priv
->ieee
->scan_age
= val
;
4287 IPW_DEBUG_INFO("set scan_age = %u\n", priv
->ieee
->scan_age
);
4290 IPW_DEBUG_INFO("exit\n");
4294 static DEVICE_ATTR(scan_age
, S_IWUSR
| S_IRUGO
, show_scan_age
, store_scan_age
);
4296 static ssize_t
show_rf_kill(struct device
*d
, struct device_attribute
*attr
,
4299 /* 0 - RF kill not enabled
4300 1 - SW based RF kill active (sysfs)
4301 2 - HW based RF kill active
4302 3 - Both HW and SW baed RF kill active */
4303 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4304 int val
= ((priv
->status
& STATUS_RF_KILL_SW
) ? 0x1 : 0x0) |
4305 (rf_kill_active(priv
) ? 0x2 : 0x0);
4306 return sprintf(buf
, "%i\n", val
);
4309 static int ipw_radio_kill_sw(struct ipw2100_priv
*priv
, int disable_radio
)
4311 if ((disable_radio
? 1 : 0) ==
4312 (priv
->status
& STATUS_RF_KILL_SW
? 1 : 0))
4315 IPW_DEBUG_RF_KILL("Manual SW RF Kill set to: RADIO %s\n",
4316 disable_radio
? "OFF" : "ON");
4318 mutex_lock(&priv
->action_mutex
);
4320 if (disable_radio
) {
4321 priv
->status
|= STATUS_RF_KILL_SW
;
4324 priv
->status
&= ~STATUS_RF_KILL_SW
;
4325 if (rf_kill_active(priv
)) {
4326 IPW_DEBUG_RF_KILL("Can not turn radio back on - "
4327 "disabled by HW switch\n");
4328 /* Make sure the RF_KILL check timer is running */
4329 priv
->stop_rf_kill
= 0;
4330 cancel_delayed_work(&priv
->rf_kill
);
4331 schedule_delayed_work(&priv
->rf_kill
,
4332 round_jiffies_relative(HZ
));
4334 schedule_reset(priv
);
4337 mutex_unlock(&priv
->action_mutex
);
4341 static ssize_t
store_rf_kill(struct device
*d
, struct device_attribute
*attr
,
4342 const char *buf
, size_t count
)
4344 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4345 ipw_radio_kill_sw(priv
, buf
[0] == '1');
4349 static DEVICE_ATTR(rf_kill
, S_IWUSR
| S_IRUGO
, show_rf_kill
, store_rf_kill
);
4351 static struct attribute
*ipw2100_sysfs_entries
[] = {
4352 &dev_attr_hardware
.attr
,
4353 &dev_attr_registers
.attr
,
4354 &dev_attr_ordinals
.attr
,
4356 &dev_attr_stats
.attr
,
4357 &dev_attr_internals
.attr
,
4358 &dev_attr_bssinfo
.attr
,
4359 &dev_attr_memory
.attr
,
4360 &dev_attr_scan_age
.attr
,
4361 &dev_attr_fatal_error
.attr
,
4362 &dev_attr_rf_kill
.attr
,
4364 &dev_attr_status
.attr
,
4365 &dev_attr_capability
.attr
,
4369 static struct attribute_group ipw2100_attribute_group
= {
4370 .attrs
= ipw2100_sysfs_entries
,
4373 static int status_queue_allocate(struct ipw2100_priv
*priv
, int entries
)
4375 struct ipw2100_status_queue
*q
= &priv
->status_queue
;
4377 IPW_DEBUG_INFO("enter\n");
4379 q
->size
= entries
* sizeof(struct ipw2100_status
);
4381 (struct ipw2100_status
*)pci_alloc_consistent(priv
->pci_dev
,
4384 IPW_DEBUG_WARNING("Can not allocate status queue.\n");
4388 memset(q
->drv
, 0, q
->size
);
4390 IPW_DEBUG_INFO("exit\n");
4395 static void status_queue_free(struct ipw2100_priv
*priv
)
4397 IPW_DEBUG_INFO("enter\n");
4399 if (priv
->status_queue
.drv
) {
4400 pci_free_consistent(priv
->pci_dev
, priv
->status_queue
.size
,
4401 priv
->status_queue
.drv
,
4402 priv
->status_queue
.nic
);
4403 priv
->status_queue
.drv
= NULL
;
4406 IPW_DEBUG_INFO("exit\n");
4409 static int bd_queue_allocate(struct ipw2100_priv
*priv
,
4410 struct ipw2100_bd_queue
*q
, int entries
)
4412 IPW_DEBUG_INFO("enter\n");
4414 memset(q
, 0, sizeof(struct ipw2100_bd_queue
));
4416 q
->entries
= entries
;
4417 q
->size
= entries
* sizeof(struct ipw2100_bd
);
4418 q
->drv
= pci_alloc_consistent(priv
->pci_dev
, q
->size
, &q
->nic
);
4421 ("can't allocate shared memory for buffer descriptors\n");
4424 memset(q
->drv
, 0, q
->size
);
4426 IPW_DEBUG_INFO("exit\n");
4431 static void bd_queue_free(struct ipw2100_priv
*priv
, struct ipw2100_bd_queue
*q
)
4433 IPW_DEBUG_INFO("enter\n");
4439 pci_free_consistent(priv
->pci_dev
, q
->size
, q
->drv
, q
->nic
);
4443 IPW_DEBUG_INFO("exit\n");
4446 static void bd_queue_initialize(struct ipw2100_priv
*priv
,
4447 struct ipw2100_bd_queue
*q
, u32 base
, u32 size
,
4450 IPW_DEBUG_INFO("enter\n");
4452 IPW_DEBUG_INFO("initializing bd queue at virt=%p, phys=%08x\n", q
->drv
,
4455 write_register(priv
->net_dev
, base
, q
->nic
);
4456 write_register(priv
->net_dev
, size
, q
->entries
);
4457 write_register(priv
->net_dev
, r
, q
->oldest
);
4458 write_register(priv
->net_dev
, w
, q
->next
);
4460 IPW_DEBUG_INFO("exit\n");
4463 static void ipw2100_kill_works(struct ipw2100_priv
*priv
)
4465 priv
->stop_rf_kill
= 1;
4466 priv
->stop_hang_check
= 1;
4467 cancel_delayed_work_sync(&priv
->reset_work
);
4468 cancel_delayed_work_sync(&priv
->security_work
);
4469 cancel_delayed_work_sync(&priv
->wx_event_work
);
4470 cancel_delayed_work_sync(&priv
->hang_check
);
4471 cancel_delayed_work_sync(&priv
->rf_kill
);
4472 cancel_work_sync(&priv
->scan_event_now
);
4473 cancel_delayed_work_sync(&priv
->scan_event_later
);
4476 static int ipw2100_tx_allocate(struct ipw2100_priv
*priv
)
4478 int i
, j
, err
= -EINVAL
;
4482 IPW_DEBUG_INFO("enter\n");
4484 err
= bd_queue_allocate(priv
, &priv
->tx_queue
, TX_QUEUE_LENGTH
);
4486 IPW_DEBUG_ERROR("%s: failed bd_queue_allocate\n",
4487 priv
->net_dev
->name
);
4492 kmalloc(TX_PENDED_QUEUE_LENGTH
* sizeof(struct ipw2100_tx_packet
),
4494 if (!priv
->tx_buffers
) {
4495 printk(KERN_ERR DRV_NAME
4496 ": %s: alloc failed form tx buffers.\n",
4497 priv
->net_dev
->name
);
4498 bd_queue_free(priv
, &priv
->tx_queue
);
4502 for (i
= 0; i
< TX_PENDED_QUEUE_LENGTH
; i
++) {
4503 v
= pci_alloc_consistent(priv
->pci_dev
,
4504 sizeof(struct ipw2100_data_header
),
4507 printk(KERN_ERR DRV_NAME
4508 ": %s: PCI alloc failed for tx " "buffers.\n",
4509 priv
->net_dev
->name
);
4514 priv
->tx_buffers
[i
].type
= DATA
;
4515 priv
->tx_buffers
[i
].info
.d_struct
.data
=
4516 (struct ipw2100_data_header
*)v
;
4517 priv
->tx_buffers
[i
].info
.d_struct
.data_phys
= p
;
4518 priv
->tx_buffers
[i
].info
.d_struct
.txb
= NULL
;
4521 if (i
== TX_PENDED_QUEUE_LENGTH
)
4524 for (j
= 0; j
< i
; j
++) {
4525 pci_free_consistent(priv
->pci_dev
,
4526 sizeof(struct ipw2100_data_header
),
4527 priv
->tx_buffers
[j
].info
.d_struct
.data
,
4528 priv
->tx_buffers
[j
].info
.d_struct
.
4532 kfree(priv
->tx_buffers
);
4533 priv
->tx_buffers
= NULL
;
4538 static void ipw2100_tx_initialize(struct ipw2100_priv
*priv
)
4542 IPW_DEBUG_INFO("enter\n");
4545 * reinitialize packet info lists
4547 INIT_LIST_HEAD(&priv
->fw_pend_list
);
4548 INIT_STAT(&priv
->fw_pend_stat
);
4551 * reinitialize lists
4553 INIT_LIST_HEAD(&priv
->tx_pend_list
);
4554 INIT_LIST_HEAD(&priv
->tx_free_list
);
4555 INIT_STAT(&priv
->tx_pend_stat
);
4556 INIT_STAT(&priv
->tx_free_stat
);
4558 for (i
= 0; i
< TX_PENDED_QUEUE_LENGTH
; i
++) {
4559 /* We simply drop any SKBs that have been queued for
4561 if (priv
->tx_buffers
[i
].info
.d_struct
.txb
) {
4562 libipw_txb_free(priv
->tx_buffers
[i
].info
.d_struct
.
4564 priv
->tx_buffers
[i
].info
.d_struct
.txb
= NULL
;
4567 list_add_tail(&priv
->tx_buffers
[i
].list
, &priv
->tx_free_list
);
4570 SET_STAT(&priv
->tx_free_stat
, i
);
4572 priv
->tx_queue
.oldest
= 0;
4573 priv
->tx_queue
.available
= priv
->tx_queue
.entries
;
4574 priv
->tx_queue
.next
= 0;
4575 INIT_STAT(&priv
->txq_stat
);
4576 SET_STAT(&priv
->txq_stat
, priv
->tx_queue
.available
);
4578 bd_queue_initialize(priv
, &priv
->tx_queue
,
4579 IPW_MEM_HOST_SHARED_TX_QUEUE_BD_BASE
,
4580 IPW_MEM_HOST_SHARED_TX_QUEUE_BD_SIZE
,
4581 IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX
,
4582 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
);
4584 IPW_DEBUG_INFO("exit\n");
4588 static void ipw2100_tx_free(struct ipw2100_priv
*priv
)
4592 IPW_DEBUG_INFO("enter\n");
4594 bd_queue_free(priv
, &priv
->tx_queue
);
4596 if (!priv
->tx_buffers
)
4599 for (i
= 0; i
< TX_PENDED_QUEUE_LENGTH
; i
++) {
4600 if (priv
->tx_buffers
[i
].info
.d_struct
.txb
) {
4601 libipw_txb_free(priv
->tx_buffers
[i
].info
.d_struct
.
4603 priv
->tx_buffers
[i
].info
.d_struct
.txb
= NULL
;
4605 if (priv
->tx_buffers
[i
].info
.d_struct
.data
)
4606 pci_free_consistent(priv
->pci_dev
,
4607 sizeof(struct ipw2100_data_header
),
4608 priv
->tx_buffers
[i
].info
.d_struct
.
4610 priv
->tx_buffers
[i
].info
.d_struct
.
4614 kfree(priv
->tx_buffers
);
4615 priv
->tx_buffers
= NULL
;
4617 IPW_DEBUG_INFO("exit\n");
4620 static int ipw2100_rx_allocate(struct ipw2100_priv
*priv
)
4622 int i
, j
, err
= -EINVAL
;
4624 IPW_DEBUG_INFO("enter\n");
4626 err
= bd_queue_allocate(priv
, &priv
->rx_queue
, RX_QUEUE_LENGTH
);
4628 IPW_DEBUG_INFO("failed bd_queue_allocate\n");
4632 err
= status_queue_allocate(priv
, RX_QUEUE_LENGTH
);
4634 IPW_DEBUG_INFO("failed status_queue_allocate\n");
4635 bd_queue_free(priv
, &priv
->rx_queue
);
4642 priv
->rx_buffers
= kmalloc(RX_QUEUE_LENGTH
*
4643 sizeof(struct ipw2100_rx_packet
),
4645 if (!priv
->rx_buffers
) {
4646 IPW_DEBUG_INFO("can't allocate rx packet buffer table\n");
4648 bd_queue_free(priv
, &priv
->rx_queue
);
4650 status_queue_free(priv
);
4655 for (i
= 0; i
< RX_QUEUE_LENGTH
; i
++) {
4656 struct ipw2100_rx_packet
*packet
= &priv
->rx_buffers
[i
];
4658 err
= ipw2100_alloc_skb(priv
, packet
);
4659 if (unlikely(err
)) {
4664 /* The BD holds the cache aligned address */
4665 priv
->rx_queue
.drv
[i
].host_addr
= packet
->dma_addr
;
4666 priv
->rx_queue
.drv
[i
].buf_length
= IPW_RX_NIC_BUFFER_LENGTH
;
4667 priv
->status_queue
.drv
[i
].status_fields
= 0;
4670 if (i
== RX_QUEUE_LENGTH
)
4673 for (j
= 0; j
< i
; j
++) {
4674 pci_unmap_single(priv
->pci_dev
, priv
->rx_buffers
[j
].dma_addr
,
4675 sizeof(struct ipw2100_rx_packet
),
4676 PCI_DMA_FROMDEVICE
);
4677 dev_kfree_skb(priv
->rx_buffers
[j
].skb
);
4680 kfree(priv
->rx_buffers
);
4681 priv
->rx_buffers
= NULL
;
4683 bd_queue_free(priv
, &priv
->rx_queue
);
4685 status_queue_free(priv
);
4690 static void ipw2100_rx_initialize(struct ipw2100_priv
*priv
)
4692 IPW_DEBUG_INFO("enter\n");
4694 priv
->rx_queue
.oldest
= 0;
4695 priv
->rx_queue
.available
= priv
->rx_queue
.entries
- 1;
4696 priv
->rx_queue
.next
= priv
->rx_queue
.entries
- 1;
4698 INIT_STAT(&priv
->rxq_stat
);
4699 SET_STAT(&priv
->rxq_stat
, priv
->rx_queue
.available
);
4701 bd_queue_initialize(priv
, &priv
->rx_queue
,
4702 IPW_MEM_HOST_SHARED_RX_BD_BASE
,
4703 IPW_MEM_HOST_SHARED_RX_BD_SIZE
,
4704 IPW_MEM_HOST_SHARED_RX_READ_INDEX
,
4705 IPW_MEM_HOST_SHARED_RX_WRITE_INDEX
);
4707 /* set up the status queue */
4708 write_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_RX_STATUS_BASE
,
4709 priv
->status_queue
.nic
);
4711 IPW_DEBUG_INFO("exit\n");
4714 static void ipw2100_rx_free(struct ipw2100_priv
*priv
)
4718 IPW_DEBUG_INFO("enter\n");
4720 bd_queue_free(priv
, &priv
->rx_queue
);
4721 status_queue_free(priv
);
4723 if (!priv
->rx_buffers
)
4726 for (i
= 0; i
< RX_QUEUE_LENGTH
; i
++) {
4727 if (priv
->rx_buffers
[i
].rxp
) {
4728 pci_unmap_single(priv
->pci_dev
,
4729 priv
->rx_buffers
[i
].dma_addr
,
4730 sizeof(struct ipw2100_rx
),
4731 PCI_DMA_FROMDEVICE
);
4732 dev_kfree_skb(priv
->rx_buffers
[i
].skb
);
4736 kfree(priv
->rx_buffers
);
4737 priv
->rx_buffers
= NULL
;
4739 IPW_DEBUG_INFO("exit\n");
4742 static int ipw2100_read_mac_address(struct ipw2100_priv
*priv
)
4744 u32 length
= ETH_ALEN
;
4749 err
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ADAPTER_MAC
, addr
, &length
);
4751 IPW_DEBUG_INFO("MAC address read failed\n");
4755 memcpy(priv
->net_dev
->dev_addr
, addr
, ETH_ALEN
);
4756 IPW_DEBUG_INFO("card MAC is %pM\n", priv
->net_dev
->dev_addr
);
4761 /********************************************************************
4765 ********************************************************************/
4767 static int ipw2100_set_mac_address(struct ipw2100_priv
*priv
, int batch_mode
)
4769 struct host_command cmd
= {
4770 .host_command
= ADAPTER_ADDRESS
,
4771 .host_command_sequence
= 0,
4772 .host_command_length
= ETH_ALEN
4776 IPW_DEBUG_HC("SET_MAC_ADDRESS\n");
4778 IPW_DEBUG_INFO("enter\n");
4780 if (priv
->config
& CFG_CUSTOM_MAC
) {
4781 memcpy(cmd
.host_command_parameters
, priv
->mac_addr
, ETH_ALEN
);
4782 memcpy(priv
->net_dev
->dev_addr
, priv
->mac_addr
, ETH_ALEN
);
4784 memcpy(cmd
.host_command_parameters
, priv
->net_dev
->dev_addr
,
4787 err
= ipw2100_hw_send_command(priv
, &cmd
);
4789 IPW_DEBUG_INFO("exit\n");
4793 static int ipw2100_set_port_type(struct ipw2100_priv
*priv
, u32 port_type
,
4796 struct host_command cmd
= {
4797 .host_command
= PORT_TYPE
,
4798 .host_command_sequence
= 0,
4799 .host_command_length
= sizeof(u32
)
4803 switch (port_type
) {
4805 cmd
.host_command_parameters
[0] = IPW_BSS
;
4808 cmd
.host_command_parameters
[0] = IPW_IBSS
;
4812 IPW_DEBUG_HC("PORT_TYPE: %s\n",
4813 port_type
== IPW_IBSS
? "Ad-Hoc" : "Managed");
4816 err
= ipw2100_disable_adapter(priv
);
4818 printk(KERN_ERR DRV_NAME
4819 ": %s: Could not disable adapter %d\n",
4820 priv
->net_dev
->name
, err
);
4825 /* send cmd to firmware */
4826 err
= ipw2100_hw_send_command(priv
, &cmd
);
4829 ipw2100_enable_adapter(priv
);
4834 static int ipw2100_set_channel(struct ipw2100_priv
*priv
, u32 channel
,
4837 struct host_command cmd
= {
4838 .host_command
= CHANNEL
,
4839 .host_command_sequence
= 0,
4840 .host_command_length
= sizeof(u32
)
4844 cmd
.host_command_parameters
[0] = channel
;
4846 IPW_DEBUG_HC("CHANNEL: %d\n", channel
);
4848 /* If BSS then we don't support channel selection */
4849 if (priv
->ieee
->iw_mode
== IW_MODE_INFRA
)
4852 if ((channel
!= 0) &&
4853 ((channel
< REG_MIN_CHANNEL
) || (channel
> REG_MAX_CHANNEL
)))
4857 err
= ipw2100_disable_adapter(priv
);
4862 err
= ipw2100_hw_send_command(priv
, &cmd
);
4864 IPW_DEBUG_INFO("Failed to set channel to %d", channel
);
4869 priv
->config
|= CFG_STATIC_CHANNEL
;
4871 priv
->config
&= ~CFG_STATIC_CHANNEL
;
4873 priv
->channel
= channel
;
4876 err
= ipw2100_enable_adapter(priv
);
4884 static int ipw2100_system_config(struct ipw2100_priv
*priv
, int batch_mode
)
4886 struct host_command cmd
= {
4887 .host_command
= SYSTEM_CONFIG
,
4888 .host_command_sequence
= 0,
4889 .host_command_length
= 12,
4891 u32 ibss_mask
, len
= sizeof(u32
);
4894 /* Set system configuration */
4897 err
= ipw2100_disable_adapter(priv
);
4902 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
)
4903 cmd
.host_command_parameters
[0] |= IPW_CFG_IBSS_AUTO_START
;
4905 cmd
.host_command_parameters
[0] |= IPW_CFG_IBSS_MASK
|
4906 IPW_CFG_BSS_MASK
| IPW_CFG_802_1x_ENABLE
;
4908 if (!(priv
->config
& CFG_LONG_PREAMBLE
))
4909 cmd
.host_command_parameters
[0] |= IPW_CFG_PREAMBLE_AUTO
;
4911 err
= ipw2100_get_ordinal(priv
,
4912 IPW_ORD_EEPROM_IBSS_11B_CHANNELS
,
4915 ibss_mask
= IPW_IBSS_11B_DEFAULT_MASK
;
4917 cmd
.host_command_parameters
[1] = REG_CHANNEL_MASK
;
4918 cmd
.host_command_parameters
[2] = REG_CHANNEL_MASK
& ibss_mask
;
4921 /*cmd.host_command_parameters[0] |= DIVERSITY_ANTENNA_A; */
4923 err
= ipw2100_hw_send_command(priv
, &cmd
);
4927 /* If IPv6 is configured in the kernel then we don't want to filter out all
4928 * of the multicast packets as IPv6 needs some. */
4929 #if !defined(CONFIG_IPV6) && !defined(CONFIG_IPV6_MODULE)
4930 cmd
.host_command
= ADD_MULTICAST
;
4931 cmd
.host_command_sequence
= 0;
4932 cmd
.host_command_length
= 0;
4934 ipw2100_hw_send_command(priv
, &cmd
);
4937 err
= ipw2100_enable_adapter(priv
);
4945 static int ipw2100_set_tx_rates(struct ipw2100_priv
*priv
, u32 rate
,
4948 struct host_command cmd
= {
4949 .host_command
= BASIC_TX_RATES
,
4950 .host_command_sequence
= 0,
4951 .host_command_length
= 4
4955 cmd
.host_command_parameters
[0] = rate
& TX_RATE_MASK
;
4958 err
= ipw2100_disable_adapter(priv
);
4963 /* Set BASIC TX Rate first */
4964 ipw2100_hw_send_command(priv
, &cmd
);
4967 cmd
.host_command
= TX_RATES
;
4968 ipw2100_hw_send_command(priv
, &cmd
);
4970 /* Set MSDU TX Rate */
4971 cmd
.host_command
= MSDU_TX_RATES
;
4972 ipw2100_hw_send_command(priv
, &cmd
);
4975 err
= ipw2100_enable_adapter(priv
);
4980 priv
->tx_rates
= rate
;
4985 static int ipw2100_set_power_mode(struct ipw2100_priv
*priv
, int power_level
)
4987 struct host_command cmd
= {
4988 .host_command
= POWER_MODE
,
4989 .host_command_sequence
= 0,
4990 .host_command_length
= 4
4994 cmd
.host_command_parameters
[0] = power_level
;
4996 err
= ipw2100_hw_send_command(priv
, &cmd
);
5000 if (power_level
== IPW_POWER_MODE_CAM
)
5001 priv
->power_mode
= IPW_POWER_LEVEL(priv
->power_mode
);
5003 priv
->power_mode
= IPW_POWER_ENABLED
| power_level
;
5005 #ifdef IPW2100_TX_POWER
5006 if (priv
->port_type
== IBSS
&& priv
->adhoc_power
!= DFTL_IBSS_TX_POWER
) {
5007 /* Set beacon interval */
5008 cmd
.host_command
= TX_POWER_INDEX
;
5009 cmd
.host_command_parameters
[0] = (u32
) priv
->adhoc_power
;
5011 err
= ipw2100_hw_send_command(priv
, &cmd
);
5020 static int ipw2100_set_rts_threshold(struct ipw2100_priv
*priv
, u32 threshold
)
5022 struct host_command cmd
= {
5023 .host_command
= RTS_THRESHOLD
,
5024 .host_command_sequence
= 0,
5025 .host_command_length
= 4
5029 if (threshold
& RTS_DISABLED
)
5030 cmd
.host_command_parameters
[0] = MAX_RTS_THRESHOLD
;
5032 cmd
.host_command_parameters
[0] = threshold
& ~RTS_DISABLED
;
5034 err
= ipw2100_hw_send_command(priv
, &cmd
);
5038 priv
->rts_threshold
= threshold
;
5044 int ipw2100_set_fragmentation_threshold(struct ipw2100_priv
*priv
,
5045 u32 threshold
, int batch_mode
)
5047 struct host_command cmd
= {
5048 .host_command
= FRAG_THRESHOLD
,
5049 .host_command_sequence
= 0,
5050 .host_command_length
= 4,
5051 .host_command_parameters
[0] = 0,
5056 err
= ipw2100_disable_adapter(priv
);
5062 threshold
= DEFAULT_FRAG_THRESHOLD
;
5064 threshold
= max(threshold
, MIN_FRAG_THRESHOLD
);
5065 threshold
= min(threshold
, MAX_FRAG_THRESHOLD
);
5068 cmd
.host_command_parameters
[0] = threshold
;
5070 IPW_DEBUG_HC("FRAG_THRESHOLD: %u\n", threshold
);
5072 err
= ipw2100_hw_send_command(priv
, &cmd
);
5075 ipw2100_enable_adapter(priv
);
5078 priv
->frag_threshold
= threshold
;
5084 static int ipw2100_set_short_retry(struct ipw2100_priv
*priv
, u32 retry
)
5086 struct host_command cmd
= {
5087 .host_command
= SHORT_RETRY_LIMIT
,
5088 .host_command_sequence
= 0,
5089 .host_command_length
= 4
5093 cmd
.host_command_parameters
[0] = retry
;
5095 err
= ipw2100_hw_send_command(priv
, &cmd
);
5099 priv
->short_retry_limit
= retry
;
5104 static int ipw2100_set_long_retry(struct ipw2100_priv
*priv
, u32 retry
)
5106 struct host_command cmd
= {
5107 .host_command
= LONG_RETRY_LIMIT
,
5108 .host_command_sequence
= 0,
5109 .host_command_length
= 4
5113 cmd
.host_command_parameters
[0] = retry
;
5115 err
= ipw2100_hw_send_command(priv
, &cmd
);
5119 priv
->long_retry_limit
= retry
;
5124 static int ipw2100_set_mandatory_bssid(struct ipw2100_priv
*priv
, u8
* bssid
,
5127 struct host_command cmd
= {
5128 .host_command
= MANDATORY_BSSID
,
5129 .host_command_sequence
= 0,
5130 .host_command_length
= (bssid
== NULL
) ? 0 : ETH_ALEN
5134 #ifdef CONFIG_IPW2100_DEBUG
5136 IPW_DEBUG_HC("MANDATORY_BSSID: %pM\n", bssid
);
5138 IPW_DEBUG_HC("MANDATORY_BSSID: <clear>\n");
5140 /* if BSSID is empty then we disable mandatory bssid mode */
5142 memcpy(cmd
.host_command_parameters
, bssid
, ETH_ALEN
);
5145 err
= ipw2100_disable_adapter(priv
);
5150 err
= ipw2100_hw_send_command(priv
, &cmd
);
5153 ipw2100_enable_adapter(priv
);
5158 static int ipw2100_disassociate_bssid(struct ipw2100_priv
*priv
)
5160 struct host_command cmd
= {
5161 .host_command
= DISASSOCIATION_BSSID
,
5162 .host_command_sequence
= 0,
5163 .host_command_length
= ETH_ALEN
5168 IPW_DEBUG_HC("DISASSOCIATION_BSSID\n");
5171 /* The Firmware currently ignores the BSSID and just disassociates from
5172 * the currently associated AP -- but in the off chance that a future
5173 * firmware does use the BSSID provided here, we go ahead and try and
5174 * set it to the currently associated AP's BSSID */
5175 memcpy(cmd
.host_command_parameters
, priv
->bssid
, ETH_ALEN
);
5177 err
= ipw2100_hw_send_command(priv
, &cmd
);
5182 static int ipw2100_set_wpa_ie(struct ipw2100_priv
*,
5183 struct ipw2100_wpa_assoc_frame
*, int)
5184 __attribute__ ((unused
));
5186 static int ipw2100_set_wpa_ie(struct ipw2100_priv
*priv
,
5187 struct ipw2100_wpa_assoc_frame
*wpa_frame
,
5190 struct host_command cmd
= {
5191 .host_command
= SET_WPA_IE
,
5192 .host_command_sequence
= 0,
5193 .host_command_length
= sizeof(struct ipw2100_wpa_assoc_frame
),
5197 IPW_DEBUG_HC("SET_WPA_IE\n");
5200 err
= ipw2100_disable_adapter(priv
);
5205 memcpy(cmd
.host_command_parameters
, wpa_frame
,
5206 sizeof(struct ipw2100_wpa_assoc_frame
));
5208 err
= ipw2100_hw_send_command(priv
, &cmd
);
5211 if (ipw2100_enable_adapter(priv
))
5218 struct security_info_params
{
5219 u32 allowed_ciphers
;
5222 u8 replay_counters_number
;
5223 u8 unicast_using_group
;
5226 static int ipw2100_set_security_information(struct ipw2100_priv
*priv
,
5229 int unicast_using_group
,
5232 struct host_command cmd
= {
5233 .host_command
= SET_SECURITY_INFORMATION
,
5234 .host_command_sequence
= 0,
5235 .host_command_length
= sizeof(struct security_info_params
)
5237 struct security_info_params
*security
=
5238 (struct security_info_params
*)&cmd
.host_command_parameters
;
5240 memset(security
, 0, sizeof(*security
));
5242 /* If shared key AP authentication is turned on, then we need to
5243 * configure the firmware to try and use it.
5245 * Actual data encryption/decryption is handled by the host. */
5246 security
->auth_mode
= auth_mode
;
5247 security
->unicast_using_group
= unicast_using_group
;
5249 switch (security_level
) {
5252 security
->allowed_ciphers
= IPW_NONE_CIPHER
;
5255 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5259 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5260 IPW_WEP104_CIPHER
| IPW_TKIP_CIPHER
;
5262 case SEC_LEVEL_2_CKIP
:
5263 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5264 IPW_WEP104_CIPHER
| IPW_CKIP_CIPHER
;
5267 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5268 IPW_WEP104_CIPHER
| IPW_TKIP_CIPHER
| IPW_CCMP_CIPHER
;
5273 ("SET_SECURITY_INFORMATION: auth:%d cipher:0x%02X (level %d)\n",
5274 security
->auth_mode
, security
->allowed_ciphers
, security_level
);
5276 security
->replay_counters_number
= 0;
5279 err
= ipw2100_disable_adapter(priv
);
5284 err
= ipw2100_hw_send_command(priv
, &cmd
);
5287 ipw2100_enable_adapter(priv
);
5292 static int ipw2100_set_tx_power(struct ipw2100_priv
*priv
, u32 tx_power
)
5294 struct host_command cmd
= {
5295 .host_command
= TX_POWER_INDEX
,
5296 .host_command_sequence
= 0,
5297 .host_command_length
= 4
5302 if (tx_power
!= IPW_TX_POWER_DEFAULT
)
5303 tmp
= (tx_power
- IPW_TX_POWER_MIN_DBM
) * 16 /
5304 (IPW_TX_POWER_MAX_DBM
- IPW_TX_POWER_MIN_DBM
);
5306 cmd
.host_command_parameters
[0] = tmp
;
5308 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
)
5309 err
= ipw2100_hw_send_command(priv
, &cmd
);
5311 priv
->tx_power
= tx_power
;
5316 static int ipw2100_set_ibss_beacon_interval(struct ipw2100_priv
*priv
,
5317 u32 interval
, int batch_mode
)
5319 struct host_command cmd
= {
5320 .host_command
= BEACON_INTERVAL
,
5321 .host_command_sequence
= 0,
5322 .host_command_length
= 4
5326 cmd
.host_command_parameters
[0] = interval
;
5328 IPW_DEBUG_INFO("enter\n");
5330 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
5332 err
= ipw2100_disable_adapter(priv
);
5337 ipw2100_hw_send_command(priv
, &cmd
);
5340 err
= ipw2100_enable_adapter(priv
);
5346 IPW_DEBUG_INFO("exit\n");
5351 static void ipw2100_queues_initialize(struct ipw2100_priv
*priv
)
5353 ipw2100_tx_initialize(priv
);
5354 ipw2100_rx_initialize(priv
);
5355 ipw2100_msg_initialize(priv
);
5358 static void ipw2100_queues_free(struct ipw2100_priv
*priv
)
5360 ipw2100_tx_free(priv
);
5361 ipw2100_rx_free(priv
);
5362 ipw2100_msg_free(priv
);
5365 static int ipw2100_queues_allocate(struct ipw2100_priv
*priv
)
5367 if (ipw2100_tx_allocate(priv
) ||
5368 ipw2100_rx_allocate(priv
) || ipw2100_msg_allocate(priv
))
5374 ipw2100_tx_free(priv
);
5375 ipw2100_rx_free(priv
);
5376 ipw2100_msg_free(priv
);
5380 #define IPW_PRIVACY_CAPABLE 0x0008
5382 static int ipw2100_set_wep_flags(struct ipw2100_priv
*priv
, u32 flags
,
5385 struct host_command cmd
= {
5386 .host_command
= WEP_FLAGS
,
5387 .host_command_sequence
= 0,
5388 .host_command_length
= 4
5392 cmd
.host_command_parameters
[0] = flags
;
5394 IPW_DEBUG_HC("WEP_FLAGS: flags = 0x%08X\n", flags
);
5397 err
= ipw2100_disable_adapter(priv
);
5399 printk(KERN_ERR DRV_NAME
5400 ": %s: Could not disable adapter %d\n",
5401 priv
->net_dev
->name
, err
);
5406 /* send cmd to firmware */
5407 err
= ipw2100_hw_send_command(priv
, &cmd
);
5410 ipw2100_enable_adapter(priv
);
5415 struct ipw2100_wep_key
{
5421 /* Macros to ease up priting WEP keys */
5422 #define WEP_FMT_64 "%02X%02X%02X%02X-%02X"
5423 #define WEP_FMT_128 "%02X%02X%02X%02X-%02X%02X%02X%02X-%02X%02X%02X"
5424 #define WEP_STR_64(x) x[0],x[1],x[2],x[3],x[4]
5425 #define WEP_STR_128(x) x[0],x[1],x[2],x[3],x[4],x[5],x[6],x[7],x[8],x[9],x[10]
5430 * @priv: struct to work on
5431 * @idx: index of the key we want to set
5432 * @key: ptr to the key data to set
5433 * @len: length of the buffer at @key
5434 * @batch_mode: FIXME perform the operation in batch mode, not
5435 * disabling the device.
5437 * @returns 0 if OK, < 0 errno code on error.
5439 * Fill out a command structure with the new wep key, length an
5440 * index and send it down the wire.
5442 static int ipw2100_set_key(struct ipw2100_priv
*priv
,
5443 int idx
, char *key
, int len
, int batch_mode
)
5445 int keylen
= len
? (len
<= 5 ? 5 : 13) : 0;
5446 struct host_command cmd
= {
5447 .host_command
= WEP_KEY_INFO
,
5448 .host_command_sequence
= 0,
5449 .host_command_length
= sizeof(struct ipw2100_wep_key
),
5451 struct ipw2100_wep_key
*wep_key
= (void *)cmd
.host_command_parameters
;
5454 IPW_DEBUG_HC("WEP_KEY_INFO: index = %d, len = %d/%d\n",
5457 /* NOTE: We don't check cached values in case the firmware was reset
5458 * or some other problem is occurring. If the user is setting the key,
5459 * then we push the change */
5462 wep_key
->len
= keylen
;
5465 memcpy(wep_key
->key
, key
, len
);
5466 memset(wep_key
->key
+ len
, 0, keylen
- len
);
5469 /* Will be optimized out on debug not being configured in */
5471 IPW_DEBUG_WEP("%s: Clearing key %d\n",
5472 priv
->net_dev
->name
, wep_key
->idx
);
5473 else if (keylen
== 5)
5474 IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_64
"\n",
5475 priv
->net_dev
->name
, wep_key
->idx
, wep_key
->len
,
5476 WEP_STR_64(wep_key
->key
));
5478 IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_128
5480 priv
->net_dev
->name
, wep_key
->idx
, wep_key
->len
,
5481 WEP_STR_128(wep_key
->key
));
5484 err
= ipw2100_disable_adapter(priv
);
5485 /* FIXME: IPG: shouldn't this prink be in _disable_adapter()? */
5487 printk(KERN_ERR DRV_NAME
5488 ": %s: Could not disable adapter %d\n",
5489 priv
->net_dev
->name
, err
);
5494 /* send cmd to firmware */
5495 err
= ipw2100_hw_send_command(priv
, &cmd
);
5498 int err2
= ipw2100_enable_adapter(priv
);
5505 static int ipw2100_set_key_index(struct ipw2100_priv
*priv
,
5506 int idx
, int batch_mode
)
5508 struct host_command cmd
= {
5509 .host_command
= WEP_KEY_INDEX
,
5510 .host_command_sequence
= 0,
5511 .host_command_length
= 4,
5512 .host_command_parameters
= {idx
},
5516 IPW_DEBUG_HC("WEP_KEY_INDEX: index = %d\n", idx
);
5518 if (idx
< 0 || idx
> 3)
5522 err
= ipw2100_disable_adapter(priv
);
5524 printk(KERN_ERR DRV_NAME
5525 ": %s: Could not disable adapter %d\n",
5526 priv
->net_dev
->name
, err
);
5531 /* send cmd to firmware */
5532 err
= ipw2100_hw_send_command(priv
, &cmd
);
5535 ipw2100_enable_adapter(priv
);
5540 static int ipw2100_configure_security(struct ipw2100_priv
*priv
, int batch_mode
)
5542 int i
, err
, auth_mode
, sec_level
, use_group
;
5544 if (!(priv
->status
& STATUS_RUNNING
))
5548 err
= ipw2100_disable_adapter(priv
);
5553 if (!priv
->ieee
->sec
.enabled
) {
5555 ipw2100_set_security_information(priv
, IPW_AUTH_OPEN
,
5558 auth_mode
= IPW_AUTH_OPEN
;
5559 if (priv
->ieee
->sec
.flags
& SEC_AUTH_MODE
) {
5560 if (priv
->ieee
->sec
.auth_mode
== WLAN_AUTH_SHARED_KEY
)
5561 auth_mode
= IPW_AUTH_SHARED
;
5562 else if (priv
->ieee
->sec
.auth_mode
== WLAN_AUTH_LEAP
)
5563 auth_mode
= IPW_AUTH_LEAP_CISCO_ID
;
5566 sec_level
= SEC_LEVEL_0
;
5567 if (priv
->ieee
->sec
.flags
& SEC_LEVEL
)
5568 sec_level
= priv
->ieee
->sec
.level
;
5571 if (priv
->ieee
->sec
.flags
& SEC_UNICAST_GROUP
)
5572 use_group
= priv
->ieee
->sec
.unicast_uses_group
;
5575 ipw2100_set_security_information(priv
, auth_mode
, sec_level
,
5582 if (priv
->ieee
->sec
.enabled
) {
5583 for (i
= 0; i
< 4; i
++) {
5584 if (!(priv
->ieee
->sec
.flags
& (1 << i
))) {
5585 memset(priv
->ieee
->sec
.keys
[i
], 0, WEP_KEY_LEN
);
5586 priv
->ieee
->sec
.key_sizes
[i
] = 0;
5588 err
= ipw2100_set_key(priv
, i
,
5589 priv
->ieee
->sec
.keys
[i
],
5597 ipw2100_set_key_index(priv
, priv
->ieee
->crypt_info
.tx_keyidx
, 1);
5600 /* Always enable privacy so the Host can filter WEP packets if
5601 * encrypted data is sent up */
5603 ipw2100_set_wep_flags(priv
,
5605 enabled
? IPW_PRIVACY_CAPABLE
: 0, 1);
5609 priv
->status
&= ~STATUS_SECURITY_UPDATED
;
5613 ipw2100_enable_adapter(priv
);
5618 static void ipw2100_security_work(struct work_struct
*work
)
5620 struct ipw2100_priv
*priv
=
5621 container_of(work
, struct ipw2100_priv
, security_work
.work
);
5623 /* If we happen to have reconnected before we get a chance to
5624 * process this, then update the security settings--which causes
5625 * a disassociation to occur */
5626 if (!(priv
->status
& STATUS_ASSOCIATED
) &&
5627 priv
->status
& STATUS_SECURITY_UPDATED
)
5628 ipw2100_configure_security(priv
, 0);
5631 static void shim__set_security(struct net_device
*dev
,
5632 struct libipw_security
*sec
)
5634 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5635 int i
, force_update
= 0;
5637 mutex_lock(&priv
->action_mutex
);
5638 if (!(priv
->status
& STATUS_INITIALIZED
))
5641 for (i
= 0; i
< 4; i
++) {
5642 if (sec
->flags
& (1 << i
)) {
5643 priv
->ieee
->sec
.key_sizes
[i
] = sec
->key_sizes
[i
];
5644 if (sec
->key_sizes
[i
] == 0)
5645 priv
->ieee
->sec
.flags
&= ~(1 << i
);
5647 memcpy(priv
->ieee
->sec
.keys
[i
], sec
->keys
[i
],
5649 if (sec
->level
== SEC_LEVEL_1
) {
5650 priv
->ieee
->sec
.flags
|= (1 << i
);
5651 priv
->status
|= STATUS_SECURITY_UPDATED
;
5653 priv
->ieee
->sec
.flags
&= ~(1 << i
);
5657 if ((sec
->flags
& SEC_ACTIVE_KEY
) &&
5658 priv
->ieee
->sec
.active_key
!= sec
->active_key
) {
5659 if (sec
->active_key
<= 3) {
5660 priv
->ieee
->sec
.active_key
= sec
->active_key
;
5661 priv
->ieee
->sec
.flags
|= SEC_ACTIVE_KEY
;
5663 priv
->ieee
->sec
.flags
&= ~SEC_ACTIVE_KEY
;
5665 priv
->status
|= STATUS_SECURITY_UPDATED
;
5668 if ((sec
->flags
& SEC_AUTH_MODE
) &&
5669 (priv
->ieee
->sec
.auth_mode
!= sec
->auth_mode
)) {
5670 priv
->ieee
->sec
.auth_mode
= sec
->auth_mode
;
5671 priv
->ieee
->sec
.flags
|= SEC_AUTH_MODE
;
5672 priv
->status
|= STATUS_SECURITY_UPDATED
;
5675 if (sec
->flags
& SEC_ENABLED
&& priv
->ieee
->sec
.enabled
!= sec
->enabled
) {
5676 priv
->ieee
->sec
.flags
|= SEC_ENABLED
;
5677 priv
->ieee
->sec
.enabled
= sec
->enabled
;
5678 priv
->status
|= STATUS_SECURITY_UPDATED
;
5682 if (sec
->flags
& SEC_ENCRYPT
)
5683 priv
->ieee
->sec
.encrypt
= sec
->encrypt
;
5685 if (sec
->flags
& SEC_LEVEL
&& priv
->ieee
->sec
.level
!= sec
->level
) {
5686 priv
->ieee
->sec
.level
= sec
->level
;
5687 priv
->ieee
->sec
.flags
|= SEC_LEVEL
;
5688 priv
->status
|= STATUS_SECURITY_UPDATED
;
5691 IPW_DEBUG_WEP("Security flags: %c %c%c%c%c %c%c%c%c\n",
5692 priv
->ieee
->sec
.flags
& (1 << 8) ? '1' : '0',
5693 priv
->ieee
->sec
.flags
& (1 << 7) ? '1' : '0',
5694 priv
->ieee
->sec
.flags
& (1 << 6) ? '1' : '0',
5695 priv
->ieee
->sec
.flags
& (1 << 5) ? '1' : '0',
5696 priv
->ieee
->sec
.flags
& (1 << 4) ? '1' : '0',
5697 priv
->ieee
->sec
.flags
& (1 << 3) ? '1' : '0',
5698 priv
->ieee
->sec
.flags
& (1 << 2) ? '1' : '0',
5699 priv
->ieee
->sec
.flags
& (1 << 1) ? '1' : '0',
5700 priv
->ieee
->sec
.flags
& (1 << 0) ? '1' : '0');
5702 /* As a temporary work around to enable WPA until we figure out why
5703 * wpa_supplicant toggles the security capability of the driver, which
5704 * forces a disassocation with force_update...
5706 * if (force_update || !(priv->status & STATUS_ASSOCIATED))*/
5707 if (!(priv
->status
& (STATUS_ASSOCIATED
| STATUS_ASSOCIATING
)))
5708 ipw2100_configure_security(priv
, 0);
5710 mutex_unlock(&priv
->action_mutex
);
5713 static int ipw2100_adapter_setup(struct ipw2100_priv
*priv
)
5719 IPW_DEBUG_INFO("enter\n");
5721 err
= ipw2100_disable_adapter(priv
);
5724 #ifdef CONFIG_IPW2100_MONITOR
5725 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
) {
5726 err
= ipw2100_set_channel(priv
, priv
->channel
, batch_mode
);
5730 IPW_DEBUG_INFO("exit\n");
5734 #endif /* CONFIG_IPW2100_MONITOR */
5736 err
= ipw2100_read_mac_address(priv
);
5740 err
= ipw2100_set_mac_address(priv
, batch_mode
);
5744 err
= ipw2100_set_port_type(priv
, priv
->ieee
->iw_mode
, batch_mode
);
5748 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
5749 err
= ipw2100_set_channel(priv
, priv
->channel
, batch_mode
);
5754 err
= ipw2100_system_config(priv
, batch_mode
);
5758 err
= ipw2100_set_tx_rates(priv
, priv
->tx_rates
, batch_mode
);
5762 /* Default to power mode OFF */
5763 err
= ipw2100_set_power_mode(priv
, IPW_POWER_MODE_CAM
);
5767 err
= ipw2100_set_rts_threshold(priv
, priv
->rts_threshold
);
5771 if (priv
->config
& CFG_STATIC_BSSID
)
5772 bssid
= priv
->bssid
;
5775 err
= ipw2100_set_mandatory_bssid(priv
, bssid
, batch_mode
);
5779 if (priv
->config
& CFG_STATIC_ESSID
)
5780 err
= ipw2100_set_essid(priv
, priv
->essid
, priv
->essid_len
,
5783 err
= ipw2100_set_essid(priv
, NULL
, 0, batch_mode
);
5787 err
= ipw2100_configure_security(priv
, batch_mode
);
5791 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
5793 ipw2100_set_ibss_beacon_interval(priv
,
5794 priv
->beacon_interval
,
5799 err
= ipw2100_set_tx_power(priv
, priv
->tx_power
);
5805 err = ipw2100_set_fragmentation_threshold(
5806 priv, priv->frag_threshold, batch_mode);
5811 IPW_DEBUG_INFO("exit\n");
5816 /*************************************************************************
5818 * EXTERNALLY CALLED METHODS
5820 *************************************************************************/
5822 /* This method is called by the network layer -- not to be confused with
5823 * ipw2100_set_mac_address() declared above called by this driver (and this
5824 * method as well) to talk to the firmware */
5825 static int ipw2100_set_address(struct net_device
*dev
, void *p
)
5827 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5828 struct sockaddr
*addr
= p
;
5831 if (!is_valid_ether_addr(addr
->sa_data
))
5832 return -EADDRNOTAVAIL
;
5834 mutex_lock(&priv
->action_mutex
);
5836 priv
->config
|= CFG_CUSTOM_MAC
;
5837 memcpy(priv
->mac_addr
, addr
->sa_data
, ETH_ALEN
);
5839 err
= ipw2100_set_mac_address(priv
, 0);
5843 priv
->reset_backoff
= 0;
5844 mutex_unlock(&priv
->action_mutex
);
5845 ipw2100_reset_adapter(&priv
->reset_work
.work
);
5849 mutex_unlock(&priv
->action_mutex
);
5853 static int ipw2100_open(struct net_device
*dev
)
5855 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5856 unsigned long flags
;
5857 IPW_DEBUG_INFO("dev->open\n");
5859 spin_lock_irqsave(&priv
->low_lock
, flags
);
5860 if (priv
->status
& STATUS_ASSOCIATED
) {
5861 netif_carrier_on(dev
);
5862 netif_start_queue(dev
);
5864 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
5869 static int ipw2100_close(struct net_device
*dev
)
5871 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5872 unsigned long flags
;
5873 struct list_head
*element
;
5874 struct ipw2100_tx_packet
*packet
;
5876 IPW_DEBUG_INFO("enter\n");
5878 spin_lock_irqsave(&priv
->low_lock
, flags
);
5880 if (priv
->status
& STATUS_ASSOCIATED
)
5881 netif_carrier_off(dev
);
5882 netif_stop_queue(dev
);
5884 /* Flush the TX queue ... */
5885 while (!list_empty(&priv
->tx_pend_list
)) {
5886 element
= priv
->tx_pend_list
.next
;
5887 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
5890 DEC_STAT(&priv
->tx_pend_stat
);
5892 libipw_txb_free(packet
->info
.d_struct
.txb
);
5893 packet
->info
.d_struct
.txb
= NULL
;
5895 list_add_tail(element
, &priv
->tx_free_list
);
5896 INC_STAT(&priv
->tx_free_stat
);
5898 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
5900 IPW_DEBUG_INFO("exit\n");
5906 * TODO: Fix this function... its just wrong
5908 static void ipw2100_tx_timeout(struct net_device
*dev
)
5910 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5912 dev
->stats
.tx_errors
++;
5914 #ifdef CONFIG_IPW2100_MONITOR
5915 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
)
5919 IPW_DEBUG_INFO("%s: TX timed out. Scheduling firmware restart.\n",
5921 schedule_reset(priv
);
5924 static int ipw2100_wpa_enable(struct ipw2100_priv
*priv
, int value
)
5926 /* This is called when wpa_supplicant loads and closes the driver
5928 priv
->ieee
->wpa_enabled
= value
;
5932 static int ipw2100_wpa_set_auth_algs(struct ipw2100_priv
*priv
, int value
)
5935 struct libipw_device
*ieee
= priv
->ieee
;
5936 struct libipw_security sec
= {
5937 .flags
= SEC_AUTH_MODE
,
5941 if (value
& IW_AUTH_ALG_SHARED_KEY
) {
5942 sec
.auth_mode
= WLAN_AUTH_SHARED_KEY
;
5944 } else if (value
& IW_AUTH_ALG_OPEN_SYSTEM
) {
5945 sec
.auth_mode
= WLAN_AUTH_OPEN
;
5947 } else if (value
& IW_AUTH_ALG_LEAP
) {
5948 sec
.auth_mode
= WLAN_AUTH_LEAP
;
5953 if (ieee
->set_security
)
5954 ieee
->set_security(ieee
->dev
, &sec
);
5961 static void ipw2100_wpa_assoc_frame(struct ipw2100_priv
*priv
,
5962 char *wpa_ie
, int wpa_ie_len
)
5965 struct ipw2100_wpa_assoc_frame frame
;
5967 frame
.fixed_ie_mask
= 0;
5970 memcpy(frame
.var_ie
, wpa_ie
, wpa_ie_len
);
5971 frame
.var_ie_len
= wpa_ie_len
;
5973 /* make sure WPA is enabled */
5974 ipw2100_wpa_enable(priv
, 1);
5975 ipw2100_set_wpa_ie(priv
, &frame
, 0);
5978 static void ipw_ethtool_get_drvinfo(struct net_device
*dev
,
5979 struct ethtool_drvinfo
*info
)
5981 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5982 char fw_ver
[64], ucode_ver
[64];
5984 strcpy(info
->driver
, DRV_NAME
);
5985 strcpy(info
->version
, DRV_VERSION
);
5987 ipw2100_get_fwversion(priv
, fw_ver
, sizeof(fw_ver
));
5988 ipw2100_get_ucodeversion(priv
, ucode_ver
, sizeof(ucode_ver
));
5990 snprintf(info
->fw_version
, sizeof(info
->fw_version
), "%s:%d:%s",
5991 fw_ver
, priv
->eeprom_version
, ucode_ver
);
5993 strcpy(info
->bus_info
, pci_name(priv
->pci_dev
));
5996 static u32
ipw2100_ethtool_get_link(struct net_device
*dev
)
5998 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5999 return (priv
->status
& STATUS_ASSOCIATED
) ? 1 : 0;
6002 static const struct ethtool_ops ipw2100_ethtool_ops
= {
6003 .get_link
= ipw2100_ethtool_get_link
,
6004 .get_drvinfo
= ipw_ethtool_get_drvinfo
,
6007 static void ipw2100_hang_check(struct work_struct
*work
)
6009 struct ipw2100_priv
*priv
=
6010 container_of(work
, struct ipw2100_priv
, hang_check
.work
);
6011 unsigned long flags
;
6012 u32 rtc
= 0xa5a5a5a5;
6013 u32 len
= sizeof(rtc
);
6016 spin_lock_irqsave(&priv
->low_lock
, flags
);
6018 if (priv
->fatal_error
!= 0) {
6019 /* If fatal_error is set then we need to restart */
6020 IPW_DEBUG_INFO("%s: Hardware fatal error detected.\n",
6021 priv
->net_dev
->name
);
6024 } else if (ipw2100_get_ordinal(priv
, IPW_ORD_RTC_TIME
, &rtc
, &len
) ||
6025 (rtc
== priv
->last_rtc
)) {
6026 /* Check if firmware is hung */
6027 IPW_DEBUG_INFO("%s: Firmware RTC stalled.\n",
6028 priv
->net_dev
->name
);
6035 priv
->stop_hang_check
= 1;
6038 /* Restart the NIC */
6039 schedule_reset(priv
);
6042 priv
->last_rtc
= rtc
;
6044 if (!priv
->stop_hang_check
)
6045 schedule_delayed_work(&priv
->hang_check
, HZ
/ 2);
6047 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
6050 static void ipw2100_rf_kill(struct work_struct
*work
)
6052 struct ipw2100_priv
*priv
=
6053 container_of(work
, struct ipw2100_priv
, rf_kill
.work
);
6054 unsigned long flags
;
6056 spin_lock_irqsave(&priv
->low_lock
, flags
);
6058 if (rf_kill_active(priv
)) {
6059 IPW_DEBUG_RF_KILL("RF Kill active, rescheduling GPIO check\n");
6060 if (!priv
->stop_rf_kill
)
6061 schedule_delayed_work(&priv
->rf_kill
,
6062 round_jiffies_relative(HZ
));
6066 /* RF Kill is now disabled, so bring the device back up */
6068 if (!(priv
->status
& STATUS_RF_KILL_MASK
)) {
6069 IPW_DEBUG_RF_KILL("HW RF Kill no longer active, restarting "
6071 schedule_reset(priv
);
6073 IPW_DEBUG_RF_KILL("HW RF Kill deactivated. SW RF Kill still "
6077 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
6080 static void ipw2100_irq_tasklet(struct ipw2100_priv
*priv
);
6082 static const struct net_device_ops ipw2100_netdev_ops
= {
6083 .ndo_open
= ipw2100_open
,
6084 .ndo_stop
= ipw2100_close
,
6085 .ndo_start_xmit
= libipw_xmit
,
6086 .ndo_change_mtu
= libipw_change_mtu
,
6087 .ndo_init
= ipw2100_net_init
,
6088 .ndo_tx_timeout
= ipw2100_tx_timeout
,
6089 .ndo_set_mac_address
= ipw2100_set_address
,
6090 .ndo_validate_addr
= eth_validate_addr
,
6093 /* Look into using netdev destructor to shutdown libipw? */
6095 static struct net_device
*ipw2100_alloc_device(struct pci_dev
*pci_dev
,
6096 void __iomem
* base_addr
,
6097 unsigned long mem_start
,
6098 unsigned long mem_len
)
6100 struct ipw2100_priv
*priv
;
6101 struct net_device
*dev
;
6103 dev
= alloc_libipw(sizeof(struct ipw2100_priv
), 0);
6106 priv
= libipw_priv(dev
);
6107 priv
->ieee
= netdev_priv(dev
);
6108 priv
->pci_dev
= pci_dev
;
6109 priv
->net_dev
= dev
;
6111 priv
->ieee
->hard_start_xmit
= ipw2100_tx
;
6112 priv
->ieee
->set_security
= shim__set_security
;
6114 priv
->ieee
->perfect_rssi
= -20;
6115 priv
->ieee
->worst_rssi
= -85;
6117 dev
->netdev_ops
= &ipw2100_netdev_ops
;
6118 dev
->ethtool_ops
= &ipw2100_ethtool_ops
;
6119 dev
->wireless_handlers
= &ipw2100_wx_handler_def
;
6120 priv
->wireless_data
.libipw
= priv
->ieee
;
6121 dev
->wireless_data
= &priv
->wireless_data
;
6122 dev
->watchdog_timeo
= 3 * HZ
;
6125 dev
->base_addr
= (unsigned long)base_addr
;
6126 dev
->mem_start
= mem_start
;
6127 dev
->mem_end
= dev
->mem_start
+ mem_len
- 1;
6129 /* NOTE: We don't use the wireless_handlers hook
6130 * in dev as the system will start throwing WX requests
6131 * to us before we're actually initialized and it just
6132 * ends up causing problems. So, we just handle
6133 * the WX extensions through the ipw2100_ioctl interface */
6135 /* memset() puts everything to 0, so we only have explicitly set
6136 * those values that need to be something else */
6138 /* If power management is turned on, default to AUTO mode */
6139 priv
->power_mode
= IPW_POWER_AUTO
;
6141 #ifdef CONFIG_IPW2100_MONITOR
6142 priv
->config
|= CFG_CRC_CHECK
;
6144 priv
->ieee
->wpa_enabled
= 0;
6145 priv
->ieee
->drop_unencrypted
= 0;
6146 priv
->ieee
->privacy_invoked
= 0;
6147 priv
->ieee
->ieee802_1x
= 1;
6149 /* Set module parameters */
6150 switch (network_mode
) {
6152 priv
->ieee
->iw_mode
= IW_MODE_ADHOC
;
6154 #ifdef CONFIG_IPW2100_MONITOR
6156 priv
->ieee
->iw_mode
= IW_MODE_MONITOR
;
6161 priv
->ieee
->iw_mode
= IW_MODE_INFRA
;
6166 priv
->status
|= STATUS_RF_KILL_SW
;
6169 ((channel
>= REG_MIN_CHANNEL
) && (channel
<= REG_MAX_CHANNEL
))) {
6170 priv
->config
|= CFG_STATIC_CHANNEL
;
6171 priv
->channel
= channel
;
6175 priv
->config
|= CFG_ASSOCIATE
;
6177 priv
->beacon_interval
= DEFAULT_BEACON_INTERVAL
;
6178 priv
->short_retry_limit
= DEFAULT_SHORT_RETRY_LIMIT
;
6179 priv
->long_retry_limit
= DEFAULT_LONG_RETRY_LIMIT
;
6180 priv
->rts_threshold
= DEFAULT_RTS_THRESHOLD
| RTS_DISABLED
;
6181 priv
->frag_threshold
= DEFAULT_FTS
| FRAG_DISABLED
;
6182 priv
->tx_power
= IPW_TX_POWER_DEFAULT
;
6183 priv
->tx_rates
= DEFAULT_TX_RATES
;
6185 strcpy(priv
->nick
, "ipw2100");
6187 spin_lock_init(&priv
->low_lock
);
6188 mutex_init(&priv
->action_mutex
);
6189 mutex_init(&priv
->adapter_mutex
);
6191 init_waitqueue_head(&priv
->wait_command_queue
);
6193 netif_carrier_off(dev
);
6195 INIT_LIST_HEAD(&priv
->msg_free_list
);
6196 INIT_LIST_HEAD(&priv
->msg_pend_list
);
6197 INIT_STAT(&priv
->msg_free_stat
);
6198 INIT_STAT(&priv
->msg_pend_stat
);
6200 INIT_LIST_HEAD(&priv
->tx_free_list
);
6201 INIT_LIST_HEAD(&priv
->tx_pend_list
);
6202 INIT_STAT(&priv
->tx_free_stat
);
6203 INIT_STAT(&priv
->tx_pend_stat
);
6205 INIT_LIST_HEAD(&priv
->fw_pend_list
);
6206 INIT_STAT(&priv
->fw_pend_stat
);
6208 INIT_DELAYED_WORK(&priv
->reset_work
, ipw2100_reset_adapter
);
6209 INIT_DELAYED_WORK(&priv
->security_work
, ipw2100_security_work
);
6210 INIT_DELAYED_WORK(&priv
->wx_event_work
, ipw2100_wx_event_work
);
6211 INIT_DELAYED_WORK(&priv
->hang_check
, ipw2100_hang_check
);
6212 INIT_DELAYED_WORK(&priv
->rf_kill
, ipw2100_rf_kill
);
6213 INIT_WORK(&priv
->scan_event_now
, ipw2100_scan_event_now
);
6214 INIT_DELAYED_WORK(&priv
->scan_event_later
, ipw2100_scan_event_later
);
6216 tasklet_init(&priv
->irq_tasklet
, (void (*)(unsigned long))
6217 ipw2100_irq_tasklet
, (unsigned long)priv
);
6219 /* NOTE: We do not start the deferred work for status checks yet */
6220 priv
->stop_rf_kill
= 1;
6221 priv
->stop_hang_check
= 1;
6226 static int ipw2100_pci_init_one(struct pci_dev
*pci_dev
,
6227 const struct pci_device_id
*ent
)
6229 unsigned long mem_start
, mem_len
, mem_flags
;
6230 void __iomem
*base_addr
= NULL
;
6231 struct net_device
*dev
= NULL
;
6232 struct ipw2100_priv
*priv
= NULL
;
6237 IPW_DEBUG_INFO("enter\n");
6239 mem_start
= pci_resource_start(pci_dev
, 0);
6240 mem_len
= pci_resource_len(pci_dev
, 0);
6241 mem_flags
= pci_resource_flags(pci_dev
, 0);
6243 if ((mem_flags
& IORESOURCE_MEM
) != IORESOURCE_MEM
) {
6244 IPW_DEBUG_INFO("weird - resource type is not memory\n");
6249 base_addr
= ioremap_nocache(mem_start
, mem_len
);
6251 printk(KERN_WARNING DRV_NAME
6252 "Error calling ioremap_nocache.\n");
6257 /* allocate and initialize our net_device */
6258 dev
= ipw2100_alloc_device(pci_dev
, base_addr
, mem_start
, mem_len
);
6260 printk(KERN_WARNING DRV_NAME
6261 "Error calling ipw2100_alloc_device.\n");
6266 /* set up PCI mappings for device */
6267 err
= pci_enable_device(pci_dev
);
6269 printk(KERN_WARNING DRV_NAME
6270 "Error calling pci_enable_device.\n");
6274 priv
= libipw_priv(dev
);
6276 pci_set_master(pci_dev
);
6277 pci_set_drvdata(pci_dev
, priv
);
6279 err
= pci_set_dma_mask(pci_dev
, DMA_BIT_MASK(32));
6281 printk(KERN_WARNING DRV_NAME
6282 "Error calling pci_set_dma_mask.\n");
6283 pci_disable_device(pci_dev
);
6287 err
= pci_request_regions(pci_dev
, DRV_NAME
);
6289 printk(KERN_WARNING DRV_NAME
6290 "Error calling pci_request_regions.\n");
6291 pci_disable_device(pci_dev
);
6295 /* We disable the RETRY_TIMEOUT register (0x41) to keep
6296 * PCI Tx retries from interfering with C3 CPU state */
6297 pci_read_config_dword(pci_dev
, 0x40, &val
);
6298 if ((val
& 0x0000ff00) != 0)
6299 pci_write_config_dword(pci_dev
, 0x40, val
& 0xffff00ff);
6301 pci_set_power_state(pci_dev
, PCI_D0
);
6303 if (!ipw2100_hw_is_adapter_in_system(dev
)) {
6304 printk(KERN_WARNING DRV_NAME
6305 "Device not found via register read.\n");
6310 SET_NETDEV_DEV(dev
, &pci_dev
->dev
);
6312 /* Force interrupts to be shut off on the device */
6313 priv
->status
|= STATUS_INT_ENABLED
;
6314 ipw2100_disable_interrupts(priv
);
6316 /* Allocate and initialize the Tx/Rx queues and lists */
6317 if (ipw2100_queues_allocate(priv
)) {
6318 printk(KERN_WARNING DRV_NAME
6319 "Error calling ipw2100_queues_allocate.\n");
6323 ipw2100_queues_initialize(priv
);
6325 err
= request_irq(pci_dev
->irq
,
6326 ipw2100_interrupt
, IRQF_SHARED
, dev
->name
, priv
);
6328 printk(KERN_WARNING DRV_NAME
6329 "Error calling request_irq: %d.\n", pci_dev
->irq
);
6332 dev
->irq
= pci_dev
->irq
;
6334 IPW_DEBUG_INFO("Attempting to register device...\n");
6336 printk(KERN_INFO DRV_NAME
6337 ": Detected Intel PRO/Wireless 2100 Network Connection\n");
6339 /* Bring up the interface. Pre 0.46, after we registered the
6340 * network device we would call ipw2100_up. This introduced a race
6341 * condition with newer hotplug configurations (network was coming
6342 * up and making calls before the device was initialized).
6344 * If we called ipw2100_up before we registered the device, then the
6345 * device name wasn't registered. So, we instead use the net_dev->init
6346 * member to call a function that then just turns and calls ipw2100_up.
6347 * net_dev->init is called after name allocation but before the
6348 * notifier chain is called */
6349 err
= register_netdev(dev
);
6351 printk(KERN_WARNING DRV_NAME
6352 "Error calling register_netdev.\n");
6357 err
= ipw2100_wdev_init(dev
);
6361 mutex_lock(&priv
->action_mutex
);
6363 IPW_DEBUG_INFO("%s: Bound to %s\n", dev
->name
, pci_name(pci_dev
));
6365 /* perform this after register_netdev so that dev->name is set */
6366 err
= sysfs_create_group(&pci_dev
->dev
.kobj
, &ipw2100_attribute_group
);
6370 /* If the RF Kill switch is disabled, go ahead and complete the
6371 * startup sequence */
6372 if (!(priv
->status
& STATUS_RF_KILL_MASK
)) {
6373 /* Enable the adapter - sends HOST_COMPLETE */
6374 if (ipw2100_enable_adapter(priv
)) {
6375 printk(KERN_WARNING DRV_NAME
6376 ": %s: failed in call to enable adapter.\n",
6377 priv
->net_dev
->name
);
6378 ipw2100_hw_stop_adapter(priv
);
6383 /* Start a scan . . . */
6384 ipw2100_set_scan_options(priv
);
6385 ipw2100_start_scan(priv
);
6388 IPW_DEBUG_INFO("exit\n");
6390 priv
->status
|= STATUS_INITIALIZED
;
6392 mutex_unlock(&priv
->action_mutex
);
6397 mutex_unlock(&priv
->action_mutex
);
6398 wiphy_unregister(priv
->ieee
->wdev
.wiphy
);
6399 kfree(priv
->ieee
->bg_band
.channels
);
6403 unregister_netdev(dev
);
6405 ipw2100_hw_stop_adapter(priv
);
6407 ipw2100_disable_interrupts(priv
);
6410 free_irq(dev
->irq
, priv
);
6412 ipw2100_kill_works(priv
);
6414 /* These are safe to call even if they weren't allocated */
6415 ipw2100_queues_free(priv
);
6416 sysfs_remove_group(&pci_dev
->dev
.kobj
,
6417 &ipw2100_attribute_group
);
6419 free_libipw(dev
, 0);
6420 pci_set_drvdata(pci_dev
, NULL
);
6426 pci_release_regions(pci_dev
);
6427 pci_disable_device(pci_dev
);
6432 static void __devexit
ipw2100_pci_remove_one(struct pci_dev
*pci_dev
)
6434 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6435 struct net_device
*dev
;
6438 mutex_lock(&priv
->action_mutex
);
6440 priv
->status
&= ~STATUS_INITIALIZED
;
6442 dev
= priv
->net_dev
;
6443 sysfs_remove_group(&pci_dev
->dev
.kobj
,
6444 &ipw2100_attribute_group
);
6447 if (ipw2100_firmware
.version
)
6448 ipw2100_release_firmware(priv
, &ipw2100_firmware
);
6450 /* Take down the hardware */
6453 /* Release the mutex so that the network subsystem can
6454 * complete any needed calls into the driver... */
6455 mutex_unlock(&priv
->action_mutex
);
6457 /* Unregister the device first - this results in close()
6458 * being called if the device is open. If we free storage
6459 * first, then close() will crash. */
6460 unregister_netdev(dev
);
6462 ipw2100_kill_works(priv
);
6464 ipw2100_queues_free(priv
);
6466 /* Free potential debugging firmware snapshot */
6467 ipw2100_snapshot_free(priv
);
6470 free_irq(dev
->irq
, priv
);
6473 iounmap((void __iomem
*)dev
->base_addr
);
6475 /* wiphy_unregister needs to be here, before free_libipw */
6476 wiphy_unregister(priv
->ieee
->wdev
.wiphy
);
6477 kfree(priv
->ieee
->bg_band
.channels
);
6478 free_libipw(dev
, 0);
6481 pci_release_regions(pci_dev
);
6482 pci_disable_device(pci_dev
);
6484 IPW_DEBUG_INFO("exit\n");
6488 static int ipw2100_suspend(struct pci_dev
*pci_dev
, pm_message_t state
)
6490 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6491 struct net_device
*dev
= priv
->net_dev
;
6493 IPW_DEBUG_INFO("%s: Going into suspend...\n", dev
->name
);
6495 mutex_lock(&priv
->action_mutex
);
6496 if (priv
->status
& STATUS_INITIALIZED
) {
6497 /* Take down the device; powers it off, etc. */
6501 /* Remove the PRESENT state of the device */
6502 netif_device_detach(dev
);
6504 pci_save_state(pci_dev
);
6505 pci_disable_device(pci_dev
);
6506 pci_set_power_state(pci_dev
, PCI_D3hot
);
6508 priv
->suspend_at
= get_seconds();
6510 mutex_unlock(&priv
->action_mutex
);
6515 static int ipw2100_resume(struct pci_dev
*pci_dev
)
6517 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6518 struct net_device
*dev
= priv
->net_dev
;
6522 if (IPW2100_PM_DISABLED
)
6525 mutex_lock(&priv
->action_mutex
);
6527 IPW_DEBUG_INFO("%s: Coming out of suspend...\n", dev
->name
);
6529 pci_set_power_state(pci_dev
, PCI_D0
);
6530 err
= pci_enable_device(pci_dev
);
6532 printk(KERN_ERR
"%s: pci_enable_device failed on resume\n",
6534 mutex_unlock(&priv
->action_mutex
);
6537 pci_restore_state(pci_dev
);
6540 * Suspend/Resume resets the PCI configuration space, so we have to
6541 * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries
6542 * from interfering with C3 CPU state. pci_restore_state won't help
6543 * here since it only restores the first 64 bytes pci config header.
6545 pci_read_config_dword(pci_dev
, 0x40, &val
);
6546 if ((val
& 0x0000ff00) != 0)
6547 pci_write_config_dword(pci_dev
, 0x40, val
& 0xffff00ff);
6549 /* Set the device back into the PRESENT state; this will also wake
6550 * the queue of needed */
6551 netif_device_attach(dev
);
6553 priv
->suspend_time
= get_seconds() - priv
->suspend_at
;
6555 /* Bring the device back up */
6556 if (!(priv
->status
& STATUS_RF_KILL_SW
))
6557 ipw2100_up(priv
, 0);
6559 mutex_unlock(&priv
->action_mutex
);
6565 static void ipw2100_shutdown(struct pci_dev
*pci_dev
)
6567 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6569 /* Take down the device; powers it off, etc. */
6572 pci_disable_device(pci_dev
);
6575 #define IPW2100_DEV_ID(x) { PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, x }
6577 static DEFINE_PCI_DEVICE_TABLE(ipw2100_pci_id_table
) = {
6578 IPW2100_DEV_ID(0x2520), /* IN 2100A mPCI 3A */
6579 IPW2100_DEV_ID(0x2521), /* IN 2100A mPCI 3B */
6580 IPW2100_DEV_ID(0x2524), /* IN 2100A mPCI 3B */
6581 IPW2100_DEV_ID(0x2525), /* IN 2100A mPCI 3B */
6582 IPW2100_DEV_ID(0x2526), /* IN 2100A mPCI Gen A3 */
6583 IPW2100_DEV_ID(0x2522), /* IN 2100 mPCI 3B */
6584 IPW2100_DEV_ID(0x2523), /* IN 2100 mPCI 3A */
6585 IPW2100_DEV_ID(0x2527), /* IN 2100 mPCI 3B */
6586 IPW2100_DEV_ID(0x2528), /* IN 2100 mPCI 3B */
6587 IPW2100_DEV_ID(0x2529), /* IN 2100 mPCI 3B */
6588 IPW2100_DEV_ID(0x252B), /* IN 2100 mPCI 3A */
6589 IPW2100_DEV_ID(0x252C), /* IN 2100 mPCI 3A */
6590 IPW2100_DEV_ID(0x252D), /* IN 2100 mPCI 3A */
6592 IPW2100_DEV_ID(0x2550), /* IB 2100A mPCI 3B */
6593 IPW2100_DEV_ID(0x2551), /* IB 2100 mPCI 3B */
6594 IPW2100_DEV_ID(0x2553), /* IB 2100 mPCI 3B */
6595 IPW2100_DEV_ID(0x2554), /* IB 2100 mPCI 3B */
6596 IPW2100_DEV_ID(0x2555), /* IB 2100 mPCI 3B */
6598 IPW2100_DEV_ID(0x2560), /* DE 2100A mPCI 3A */
6599 IPW2100_DEV_ID(0x2562), /* DE 2100A mPCI 3A */
6600 IPW2100_DEV_ID(0x2563), /* DE 2100A mPCI 3A */
6601 IPW2100_DEV_ID(0x2561), /* DE 2100 mPCI 3A */
6602 IPW2100_DEV_ID(0x2565), /* DE 2100 mPCI 3A */
6603 IPW2100_DEV_ID(0x2566), /* DE 2100 mPCI 3A */
6604 IPW2100_DEV_ID(0x2567), /* DE 2100 mPCI 3A */
6606 IPW2100_DEV_ID(0x2570), /* GA 2100 mPCI 3B */
6608 IPW2100_DEV_ID(0x2580), /* TO 2100A mPCI 3B */
6609 IPW2100_DEV_ID(0x2582), /* TO 2100A mPCI 3B */
6610 IPW2100_DEV_ID(0x2583), /* TO 2100A mPCI 3B */
6611 IPW2100_DEV_ID(0x2581), /* TO 2100 mPCI 3B */
6612 IPW2100_DEV_ID(0x2585), /* TO 2100 mPCI 3B */
6613 IPW2100_DEV_ID(0x2586), /* TO 2100 mPCI 3B */
6614 IPW2100_DEV_ID(0x2587), /* TO 2100 mPCI 3B */
6616 IPW2100_DEV_ID(0x2590), /* SO 2100A mPCI 3B */
6617 IPW2100_DEV_ID(0x2592), /* SO 2100A mPCI 3B */
6618 IPW2100_DEV_ID(0x2591), /* SO 2100 mPCI 3B */
6619 IPW2100_DEV_ID(0x2593), /* SO 2100 mPCI 3B */
6620 IPW2100_DEV_ID(0x2596), /* SO 2100 mPCI 3B */
6621 IPW2100_DEV_ID(0x2598), /* SO 2100 mPCI 3B */
6623 IPW2100_DEV_ID(0x25A0), /* HP 2100 mPCI 3B */
6627 MODULE_DEVICE_TABLE(pci
, ipw2100_pci_id_table
);
6629 static struct pci_driver ipw2100_pci_driver
= {
6631 .id_table
= ipw2100_pci_id_table
,
6632 .probe
= ipw2100_pci_init_one
,
6633 .remove
= __devexit_p(ipw2100_pci_remove_one
),
6635 .suspend
= ipw2100_suspend
,
6636 .resume
= ipw2100_resume
,
6638 .shutdown
= ipw2100_shutdown
,
6642 * Initialize the ipw2100 driver/module
6644 * @returns 0 if ok, < 0 errno node con error.
6646 * Note: we cannot init the /proc stuff until the PCI driver is there,
6647 * or we risk an unlikely race condition on someone accessing
6648 * uninitialized data in the PCI dev struct through /proc.
6650 static int __init
ipw2100_init(void)
6654 printk(KERN_INFO DRV_NAME
": %s, %s\n", DRV_DESCRIPTION
, DRV_VERSION
);
6655 printk(KERN_INFO DRV_NAME
": %s\n", DRV_COPYRIGHT
);
6657 pm_qos_add_request(&ipw2100_pm_qos_req
, PM_QOS_CPU_DMA_LATENCY
,
6658 PM_QOS_DEFAULT_VALUE
);
6660 ret
= pci_register_driver(&ipw2100_pci_driver
);
6664 #ifdef CONFIG_IPW2100_DEBUG
6665 ipw2100_debug_level
= debug
;
6666 ret
= driver_create_file(&ipw2100_pci_driver
.driver
,
6667 &driver_attr_debug_level
);
6675 * Cleanup ipw2100 driver registration
6677 static void __exit
ipw2100_exit(void)
6679 /* FIXME: IPG: check that we have no instances of the devices open */
6680 #ifdef CONFIG_IPW2100_DEBUG
6681 driver_remove_file(&ipw2100_pci_driver
.driver
,
6682 &driver_attr_debug_level
);
6684 pci_unregister_driver(&ipw2100_pci_driver
);
6685 pm_qos_remove_request(&ipw2100_pm_qos_req
);
6688 module_init(ipw2100_init
);
6689 module_exit(ipw2100_exit
);
6691 static int ipw2100_wx_get_name(struct net_device
*dev
,
6692 struct iw_request_info
*info
,
6693 union iwreq_data
*wrqu
, char *extra
)
6696 * This can be called at any time. No action lock required
6699 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6700 if (!(priv
->status
& STATUS_ASSOCIATED
))
6701 strcpy(wrqu
->name
, "unassociated");
6703 snprintf(wrqu
->name
, IFNAMSIZ
, "IEEE 802.11b");
6705 IPW_DEBUG_WX("Name: %s\n", wrqu
->name
);
6709 static int ipw2100_wx_set_freq(struct net_device
*dev
,
6710 struct iw_request_info
*info
,
6711 union iwreq_data
*wrqu
, char *extra
)
6713 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6714 struct iw_freq
*fwrq
= &wrqu
->freq
;
6717 if (priv
->ieee
->iw_mode
== IW_MODE_INFRA
)
6720 mutex_lock(&priv
->action_mutex
);
6721 if (!(priv
->status
& STATUS_INITIALIZED
)) {
6726 /* if setting by freq convert to channel */
6728 if ((fwrq
->m
>= (int)2.412e8
&& fwrq
->m
<= (int)2.487e8
)) {
6729 int f
= fwrq
->m
/ 100000;
6732 while ((c
< REG_MAX_CHANNEL
) &&
6733 (f
!= ipw2100_frequencies
[c
]))
6736 /* hack to fall through */
6742 if (fwrq
->e
> 0 || fwrq
->m
> 1000) {
6745 } else { /* Set the channel */
6746 IPW_DEBUG_WX("SET Freq/Channel -> %d\n", fwrq
->m
);
6747 err
= ipw2100_set_channel(priv
, fwrq
->m
, 0);
6751 mutex_unlock(&priv
->action_mutex
);
6755 static int ipw2100_wx_get_freq(struct net_device
*dev
,
6756 struct iw_request_info
*info
,
6757 union iwreq_data
*wrqu
, char *extra
)
6760 * This can be called at any time. No action lock required
6763 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6767 /* If we are associated, trying to associate, or have a statically
6768 * configured CHANNEL then return that; otherwise return ANY */
6769 if (priv
->config
& CFG_STATIC_CHANNEL
||
6770 priv
->status
& STATUS_ASSOCIATED
)
6771 wrqu
->freq
.m
= priv
->channel
;
6775 IPW_DEBUG_WX("GET Freq/Channel -> %d\n", priv
->channel
);
6780 static int ipw2100_wx_set_mode(struct net_device
*dev
,
6781 struct iw_request_info
*info
,
6782 union iwreq_data
*wrqu
, char *extra
)
6784 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6787 IPW_DEBUG_WX("SET Mode -> %d\n", wrqu
->mode
);
6789 if (wrqu
->mode
== priv
->ieee
->iw_mode
)
6792 mutex_lock(&priv
->action_mutex
);
6793 if (!(priv
->status
& STATUS_INITIALIZED
)) {
6798 switch (wrqu
->mode
) {
6799 #ifdef CONFIG_IPW2100_MONITOR
6800 case IW_MODE_MONITOR
:
6801 err
= ipw2100_switch_mode(priv
, IW_MODE_MONITOR
);
6803 #endif /* CONFIG_IPW2100_MONITOR */
6805 err
= ipw2100_switch_mode(priv
, IW_MODE_ADHOC
);
6810 err
= ipw2100_switch_mode(priv
, IW_MODE_INFRA
);
6815 mutex_unlock(&priv
->action_mutex
);
6819 static int ipw2100_wx_get_mode(struct net_device
*dev
,
6820 struct iw_request_info
*info
,
6821 union iwreq_data
*wrqu
, char *extra
)
6824 * This can be called at any time. No action lock required
6827 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6829 wrqu
->mode
= priv
->ieee
->iw_mode
;
6830 IPW_DEBUG_WX("GET Mode -> %d\n", wrqu
->mode
);
6835 #define POWER_MODES 5
6837 /* Values are in microsecond */
6838 static const s32 timeout_duration
[POWER_MODES
] = {
6846 static const s32 period_duration
[POWER_MODES
] = {
6854 static int ipw2100_wx_get_range(struct net_device
*dev
,
6855 struct iw_request_info
*info
,
6856 union iwreq_data
*wrqu
, char *extra
)
6859 * This can be called at any time. No action lock required
6862 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6863 struct iw_range
*range
= (struct iw_range
*)extra
;
6867 wrqu
->data
.length
= sizeof(*range
);
6868 memset(range
, 0, sizeof(*range
));
6870 /* Let's try to keep this struct in the same order as in
6871 * linux/include/wireless.h
6874 /* TODO: See what values we can set, and remove the ones we can't
6875 * set, or fill them with some default data.
6878 /* ~5 Mb/s real (802.11b) */
6879 range
->throughput
= 5 * 1000 * 1000;
6881 // range->sensitivity; /* signal level threshold range */
6883 range
->max_qual
.qual
= 100;
6884 /* TODO: Find real max RSSI and stick here */
6885 range
->max_qual
.level
= 0;
6886 range
->max_qual
.noise
= 0;
6887 range
->max_qual
.updated
= 7; /* Updated all three */
6889 range
->avg_qual
.qual
= 70; /* > 8% missed beacons is 'bad' */
6890 /* TODO: Find real 'good' to 'bad' threshold value for RSSI */
6891 range
->avg_qual
.level
= 20 + IPW2100_RSSI_TO_DBM
;
6892 range
->avg_qual
.noise
= 0;
6893 range
->avg_qual
.updated
= 7; /* Updated all three */
6895 range
->num_bitrates
= RATE_COUNT
;
6897 for (i
= 0; i
< RATE_COUNT
&& i
< IW_MAX_BITRATES
; i
++) {
6898 range
->bitrate
[i
] = ipw2100_rates_11b
[i
];
6901 range
->min_rts
= MIN_RTS_THRESHOLD
;
6902 range
->max_rts
= MAX_RTS_THRESHOLD
;
6903 range
->min_frag
= MIN_FRAG_THRESHOLD
;
6904 range
->max_frag
= MAX_FRAG_THRESHOLD
;
6906 range
->min_pmp
= period_duration
[0]; /* Minimal PM period */
6907 range
->max_pmp
= period_duration
[POWER_MODES
- 1]; /* Maximal PM period */
6908 range
->min_pmt
= timeout_duration
[POWER_MODES
- 1]; /* Minimal PM timeout */
6909 range
->max_pmt
= timeout_duration
[0]; /* Maximal PM timeout */
6911 /* How to decode max/min PM period */
6912 range
->pmp_flags
= IW_POWER_PERIOD
;
6913 /* How to decode max/min PM period */
6914 range
->pmt_flags
= IW_POWER_TIMEOUT
;
6915 /* What PM options are supported */
6916 range
->pm_capa
= IW_POWER_TIMEOUT
| IW_POWER_PERIOD
;
6918 range
->encoding_size
[0] = 5;
6919 range
->encoding_size
[1] = 13; /* Different token sizes */
6920 range
->num_encoding_sizes
= 2; /* Number of entry in the list */
6921 range
->max_encoding_tokens
= WEP_KEYS
; /* Max number of tokens */
6922 // range->encoding_login_index; /* token index for login token */
6924 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
6925 range
->txpower_capa
= IW_TXPOW_DBM
;
6926 range
->num_txpower
= IW_MAX_TXPOWER
;
6927 for (i
= 0, level
= (IPW_TX_POWER_MAX_DBM
* 16);
6930 ((IPW_TX_POWER_MAX_DBM
-
6931 IPW_TX_POWER_MIN_DBM
) * 16) / (IW_MAX_TXPOWER
- 1))
6932 range
->txpower
[i
] = level
/ 16;
6934 range
->txpower_capa
= 0;
6935 range
->num_txpower
= 0;
6938 /* Set the Wireless Extension versions */
6939 range
->we_version_compiled
= WIRELESS_EXT
;
6940 range
->we_version_source
= 18;
6942 // range->retry_capa; /* What retry options are supported */
6943 // range->retry_flags; /* How to decode max/min retry limit */
6944 // range->r_time_flags; /* How to decode max/min retry life */
6945 // range->min_retry; /* Minimal number of retries */
6946 // range->max_retry; /* Maximal number of retries */
6947 // range->min_r_time; /* Minimal retry lifetime */
6948 // range->max_r_time; /* Maximal retry lifetime */
6950 range
->num_channels
= FREQ_COUNT
;
6953 for (i
= 0; i
< FREQ_COUNT
; i
++) {
6954 // TODO: Include only legal frequencies for some countries
6955 // if (local->channel_mask & (1 << i)) {
6956 range
->freq
[val
].i
= i
+ 1;
6957 range
->freq
[val
].m
= ipw2100_frequencies
[i
] * 100000;
6958 range
->freq
[val
].e
= 1;
6961 if (val
== IW_MAX_FREQUENCIES
)
6964 range
->num_frequency
= val
;
6966 /* Event capability (kernel + driver) */
6967 range
->event_capa
[0] = (IW_EVENT_CAPA_K_0
|
6968 IW_EVENT_CAPA_MASK(SIOCGIWAP
));
6969 range
->event_capa
[1] = IW_EVENT_CAPA_K_1
;
6971 range
->enc_capa
= IW_ENC_CAPA_WPA
| IW_ENC_CAPA_WPA2
|
6972 IW_ENC_CAPA_CIPHER_TKIP
| IW_ENC_CAPA_CIPHER_CCMP
;
6974 IPW_DEBUG_WX("GET Range\n");
6979 static int ipw2100_wx_set_wap(struct net_device
*dev
,
6980 struct iw_request_info
*info
,
6981 union iwreq_data
*wrqu
, char *extra
)
6983 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6986 static const unsigned char any
[] = {
6987 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
6989 static const unsigned char off
[] = {
6990 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
6994 if (wrqu
->ap_addr
.sa_family
!= ARPHRD_ETHER
)
6997 mutex_lock(&priv
->action_mutex
);
6998 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7003 if (!memcmp(any
, wrqu
->ap_addr
.sa_data
, ETH_ALEN
) ||
7004 !memcmp(off
, wrqu
->ap_addr
.sa_data
, ETH_ALEN
)) {
7005 /* we disable mandatory BSSID association */
7006 IPW_DEBUG_WX("exit - disable mandatory BSSID\n");
7007 priv
->config
&= ~CFG_STATIC_BSSID
;
7008 err
= ipw2100_set_mandatory_bssid(priv
, NULL
, 0);
7012 priv
->config
|= CFG_STATIC_BSSID
;
7013 memcpy(priv
->mandatory_bssid_mac
, wrqu
->ap_addr
.sa_data
, ETH_ALEN
);
7015 err
= ipw2100_set_mandatory_bssid(priv
, wrqu
->ap_addr
.sa_data
, 0);
7017 IPW_DEBUG_WX("SET BSSID -> %pM\n", wrqu
->ap_addr
.sa_data
);
7020 mutex_unlock(&priv
->action_mutex
);
7024 static int ipw2100_wx_get_wap(struct net_device
*dev
,
7025 struct iw_request_info
*info
,
7026 union iwreq_data
*wrqu
, char *extra
)
7029 * This can be called at any time. No action lock required
7032 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7034 /* If we are associated, trying to associate, or have a statically
7035 * configured BSSID then return that; otherwise return ANY */
7036 if (priv
->config
& CFG_STATIC_BSSID
|| priv
->status
& STATUS_ASSOCIATED
) {
7037 wrqu
->ap_addr
.sa_family
= ARPHRD_ETHER
;
7038 memcpy(wrqu
->ap_addr
.sa_data
, priv
->bssid
, ETH_ALEN
);
7040 memset(wrqu
->ap_addr
.sa_data
, 0, ETH_ALEN
);
7042 IPW_DEBUG_WX("Getting WAP BSSID: %pM\n", wrqu
->ap_addr
.sa_data
);
7046 static int ipw2100_wx_set_essid(struct net_device
*dev
,
7047 struct iw_request_info
*info
,
7048 union iwreq_data
*wrqu
, char *extra
)
7050 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7051 char *essid
= ""; /* ANY */
7054 DECLARE_SSID_BUF(ssid
);
7056 mutex_lock(&priv
->action_mutex
);
7057 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7062 if (wrqu
->essid
.flags
&& wrqu
->essid
.length
) {
7063 length
= wrqu
->essid
.length
;
7068 IPW_DEBUG_WX("Setting ESSID to ANY\n");
7069 priv
->config
&= ~CFG_STATIC_ESSID
;
7070 err
= ipw2100_set_essid(priv
, NULL
, 0, 0);
7074 length
= min(length
, IW_ESSID_MAX_SIZE
);
7076 priv
->config
|= CFG_STATIC_ESSID
;
7078 if (priv
->essid_len
== length
&& !memcmp(priv
->essid
, extra
, length
)) {
7079 IPW_DEBUG_WX("ESSID set to current ESSID.\n");
7084 IPW_DEBUG_WX("Setting ESSID: '%s' (%d)\n",
7085 print_ssid(ssid
, essid
, length
), length
);
7087 priv
->essid_len
= length
;
7088 memcpy(priv
->essid
, essid
, priv
->essid_len
);
7090 err
= ipw2100_set_essid(priv
, essid
, length
, 0);
7093 mutex_unlock(&priv
->action_mutex
);
7097 static int ipw2100_wx_get_essid(struct net_device
*dev
,
7098 struct iw_request_info
*info
,
7099 union iwreq_data
*wrqu
, char *extra
)
7102 * This can be called at any time. No action lock required
7105 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7106 DECLARE_SSID_BUF(ssid
);
7108 /* If we are associated, trying to associate, or have a statically
7109 * configured ESSID then return that; otherwise return ANY */
7110 if (priv
->config
& CFG_STATIC_ESSID
|| priv
->status
& STATUS_ASSOCIATED
) {
7111 IPW_DEBUG_WX("Getting essid: '%s'\n",
7112 print_ssid(ssid
, priv
->essid
, priv
->essid_len
));
7113 memcpy(extra
, priv
->essid
, priv
->essid_len
);
7114 wrqu
->essid
.length
= priv
->essid_len
;
7115 wrqu
->essid
.flags
= 1; /* active */
7117 IPW_DEBUG_WX("Getting essid: ANY\n");
7118 wrqu
->essid
.length
= 0;
7119 wrqu
->essid
.flags
= 0; /* active */
7125 static int ipw2100_wx_set_nick(struct net_device
*dev
,
7126 struct iw_request_info
*info
,
7127 union iwreq_data
*wrqu
, char *extra
)
7130 * This can be called at any time. No action lock required
7133 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7135 if (wrqu
->data
.length
> IW_ESSID_MAX_SIZE
)
7138 wrqu
->data
.length
= min((size_t) wrqu
->data
.length
, sizeof(priv
->nick
));
7139 memset(priv
->nick
, 0, sizeof(priv
->nick
));
7140 memcpy(priv
->nick
, extra
, wrqu
->data
.length
);
7142 IPW_DEBUG_WX("SET Nickname -> %s\n", priv
->nick
);
7147 static int ipw2100_wx_get_nick(struct net_device
*dev
,
7148 struct iw_request_info
*info
,
7149 union iwreq_data
*wrqu
, char *extra
)
7152 * This can be called at any time. No action lock required
7155 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7157 wrqu
->data
.length
= strlen(priv
->nick
);
7158 memcpy(extra
, priv
->nick
, wrqu
->data
.length
);
7159 wrqu
->data
.flags
= 1; /* active */
7161 IPW_DEBUG_WX("GET Nickname -> %s\n", extra
);
7166 static int ipw2100_wx_set_rate(struct net_device
*dev
,
7167 struct iw_request_info
*info
,
7168 union iwreq_data
*wrqu
, char *extra
)
7170 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7171 u32 target_rate
= wrqu
->bitrate
.value
;
7175 mutex_lock(&priv
->action_mutex
);
7176 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7183 if (target_rate
== 1000000 ||
7184 (!wrqu
->bitrate
.fixed
&& target_rate
> 1000000))
7185 rate
|= TX_RATE_1_MBIT
;
7186 if (target_rate
== 2000000 ||
7187 (!wrqu
->bitrate
.fixed
&& target_rate
> 2000000))
7188 rate
|= TX_RATE_2_MBIT
;
7189 if (target_rate
== 5500000 ||
7190 (!wrqu
->bitrate
.fixed
&& target_rate
> 5500000))
7191 rate
|= TX_RATE_5_5_MBIT
;
7192 if (target_rate
== 11000000 ||
7193 (!wrqu
->bitrate
.fixed
&& target_rate
> 11000000))
7194 rate
|= TX_RATE_11_MBIT
;
7196 rate
= DEFAULT_TX_RATES
;
7198 err
= ipw2100_set_tx_rates(priv
, rate
, 0);
7200 IPW_DEBUG_WX("SET Rate -> %04X\n", rate
);
7202 mutex_unlock(&priv
->action_mutex
);
7206 static int ipw2100_wx_get_rate(struct net_device
*dev
,
7207 struct iw_request_info
*info
,
7208 union iwreq_data
*wrqu
, char *extra
)
7210 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7212 unsigned int len
= sizeof(val
);
7215 if (!(priv
->status
& STATUS_ENABLED
) ||
7216 priv
->status
& STATUS_RF_KILL_MASK
||
7217 !(priv
->status
& STATUS_ASSOCIATED
)) {
7218 wrqu
->bitrate
.value
= 0;
7222 mutex_lock(&priv
->action_mutex
);
7223 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7228 err
= ipw2100_get_ordinal(priv
, IPW_ORD_CURRENT_TX_RATE
, &val
, &len
);
7230 IPW_DEBUG_WX("failed querying ordinals.\n");
7234 switch (val
& TX_RATE_MASK
) {
7235 case TX_RATE_1_MBIT
:
7236 wrqu
->bitrate
.value
= 1000000;
7238 case TX_RATE_2_MBIT
:
7239 wrqu
->bitrate
.value
= 2000000;
7241 case TX_RATE_5_5_MBIT
:
7242 wrqu
->bitrate
.value
= 5500000;
7244 case TX_RATE_11_MBIT
:
7245 wrqu
->bitrate
.value
= 11000000;
7248 wrqu
->bitrate
.value
= 0;
7251 IPW_DEBUG_WX("GET Rate -> %d\n", wrqu
->bitrate
.value
);
7254 mutex_unlock(&priv
->action_mutex
);
7258 static int ipw2100_wx_set_rts(struct net_device
*dev
,
7259 struct iw_request_info
*info
,
7260 union iwreq_data
*wrqu
, char *extra
)
7262 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7265 /* Auto RTS not yet supported */
7266 if (wrqu
->rts
.fixed
== 0)
7269 mutex_lock(&priv
->action_mutex
);
7270 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7275 if (wrqu
->rts
.disabled
)
7276 value
= priv
->rts_threshold
| RTS_DISABLED
;
7278 if (wrqu
->rts
.value
< 1 || wrqu
->rts
.value
> 2304) {
7282 value
= wrqu
->rts
.value
;
7285 err
= ipw2100_set_rts_threshold(priv
, value
);
7287 IPW_DEBUG_WX("SET RTS Threshold -> 0x%08X\n", value
);
7289 mutex_unlock(&priv
->action_mutex
);
7293 static int ipw2100_wx_get_rts(struct net_device
*dev
,
7294 struct iw_request_info
*info
,
7295 union iwreq_data
*wrqu
, char *extra
)
7298 * This can be called at any time. No action lock required
7301 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7303 wrqu
->rts
.value
= priv
->rts_threshold
& ~RTS_DISABLED
;
7304 wrqu
->rts
.fixed
= 1; /* no auto select */
7306 /* If RTS is set to the default value, then it is disabled */
7307 wrqu
->rts
.disabled
= (priv
->rts_threshold
& RTS_DISABLED
) ? 1 : 0;
7309 IPW_DEBUG_WX("GET RTS Threshold -> 0x%08X\n", wrqu
->rts
.value
);
7314 static int ipw2100_wx_set_txpow(struct net_device
*dev
,
7315 struct iw_request_info
*info
,
7316 union iwreq_data
*wrqu
, char *extra
)
7318 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7321 if (ipw_radio_kill_sw(priv
, wrqu
->txpower
.disabled
))
7322 return -EINPROGRESS
;
7324 if (priv
->ieee
->iw_mode
!= IW_MODE_ADHOC
)
7327 if ((wrqu
->txpower
.flags
& IW_TXPOW_TYPE
) != IW_TXPOW_DBM
)
7330 if (wrqu
->txpower
.fixed
== 0)
7331 value
= IPW_TX_POWER_DEFAULT
;
7333 if (wrqu
->txpower
.value
< IPW_TX_POWER_MIN_DBM
||
7334 wrqu
->txpower
.value
> IPW_TX_POWER_MAX_DBM
)
7337 value
= wrqu
->txpower
.value
;
7340 mutex_lock(&priv
->action_mutex
);
7341 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7346 err
= ipw2100_set_tx_power(priv
, value
);
7348 IPW_DEBUG_WX("SET TX Power -> %d\n", value
);
7351 mutex_unlock(&priv
->action_mutex
);
7355 static int ipw2100_wx_get_txpow(struct net_device
*dev
,
7356 struct iw_request_info
*info
,
7357 union iwreq_data
*wrqu
, char *extra
)
7360 * This can be called at any time. No action lock required
7363 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7365 wrqu
->txpower
.disabled
= (priv
->status
& STATUS_RF_KILL_MASK
) ? 1 : 0;
7367 if (priv
->tx_power
== IPW_TX_POWER_DEFAULT
) {
7368 wrqu
->txpower
.fixed
= 0;
7369 wrqu
->txpower
.value
= IPW_TX_POWER_MAX_DBM
;
7371 wrqu
->txpower
.fixed
= 1;
7372 wrqu
->txpower
.value
= priv
->tx_power
;
7375 wrqu
->txpower
.flags
= IW_TXPOW_DBM
;
7377 IPW_DEBUG_WX("GET TX Power -> %d\n", wrqu
->txpower
.value
);
7382 static int ipw2100_wx_set_frag(struct net_device
*dev
,
7383 struct iw_request_info
*info
,
7384 union iwreq_data
*wrqu
, char *extra
)
7387 * This can be called at any time. No action lock required
7390 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7392 if (!wrqu
->frag
.fixed
)
7395 if (wrqu
->frag
.disabled
) {
7396 priv
->frag_threshold
|= FRAG_DISABLED
;
7397 priv
->ieee
->fts
= DEFAULT_FTS
;
7399 if (wrqu
->frag
.value
< MIN_FRAG_THRESHOLD
||
7400 wrqu
->frag
.value
> MAX_FRAG_THRESHOLD
)
7403 priv
->ieee
->fts
= wrqu
->frag
.value
& ~0x1;
7404 priv
->frag_threshold
= priv
->ieee
->fts
;
7407 IPW_DEBUG_WX("SET Frag Threshold -> %d\n", priv
->ieee
->fts
);
7412 static int ipw2100_wx_get_frag(struct net_device
*dev
,
7413 struct iw_request_info
*info
,
7414 union iwreq_data
*wrqu
, char *extra
)
7417 * This can be called at any time. No action lock required
7420 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7421 wrqu
->frag
.value
= priv
->frag_threshold
& ~FRAG_DISABLED
;
7422 wrqu
->frag
.fixed
= 0; /* no auto select */
7423 wrqu
->frag
.disabled
= (priv
->frag_threshold
& FRAG_DISABLED
) ? 1 : 0;
7425 IPW_DEBUG_WX("GET Frag Threshold -> %d\n", wrqu
->frag
.value
);
7430 static int ipw2100_wx_set_retry(struct net_device
*dev
,
7431 struct iw_request_info
*info
,
7432 union iwreq_data
*wrqu
, char *extra
)
7434 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7437 if (wrqu
->retry
.flags
& IW_RETRY_LIFETIME
|| wrqu
->retry
.disabled
)
7440 if (!(wrqu
->retry
.flags
& IW_RETRY_LIMIT
))
7443 mutex_lock(&priv
->action_mutex
);
7444 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7449 if (wrqu
->retry
.flags
& IW_RETRY_SHORT
) {
7450 err
= ipw2100_set_short_retry(priv
, wrqu
->retry
.value
);
7451 IPW_DEBUG_WX("SET Short Retry Limit -> %d\n",
7456 if (wrqu
->retry
.flags
& IW_RETRY_LONG
) {
7457 err
= ipw2100_set_long_retry(priv
, wrqu
->retry
.value
);
7458 IPW_DEBUG_WX("SET Long Retry Limit -> %d\n",
7463 err
= ipw2100_set_short_retry(priv
, wrqu
->retry
.value
);
7465 err
= ipw2100_set_long_retry(priv
, wrqu
->retry
.value
);
7467 IPW_DEBUG_WX("SET Both Retry Limits -> %d\n", wrqu
->retry
.value
);
7470 mutex_unlock(&priv
->action_mutex
);
7474 static int ipw2100_wx_get_retry(struct net_device
*dev
,
7475 struct iw_request_info
*info
,
7476 union iwreq_data
*wrqu
, char *extra
)
7479 * This can be called at any time. No action lock required
7482 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7484 wrqu
->retry
.disabled
= 0; /* can't be disabled */
7486 if ((wrqu
->retry
.flags
& IW_RETRY_TYPE
) == IW_RETRY_LIFETIME
)
7489 if (wrqu
->retry
.flags
& IW_RETRY_LONG
) {
7490 wrqu
->retry
.flags
= IW_RETRY_LIMIT
| IW_RETRY_LONG
;
7491 wrqu
->retry
.value
= priv
->long_retry_limit
;
7494 (priv
->short_retry_limit
!=
7495 priv
->long_retry_limit
) ?
7496 IW_RETRY_LIMIT
| IW_RETRY_SHORT
: IW_RETRY_LIMIT
;
7498 wrqu
->retry
.value
= priv
->short_retry_limit
;
7501 IPW_DEBUG_WX("GET Retry -> %d\n", wrqu
->retry
.value
);
7506 static int ipw2100_wx_set_scan(struct net_device
*dev
,
7507 struct iw_request_info
*info
,
7508 union iwreq_data
*wrqu
, char *extra
)
7510 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7513 mutex_lock(&priv
->action_mutex
);
7514 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7519 IPW_DEBUG_WX("Initiating scan...\n");
7521 priv
->user_requested_scan
= 1;
7522 if (ipw2100_set_scan_options(priv
) || ipw2100_start_scan(priv
)) {
7523 IPW_DEBUG_WX("Start scan failed.\n");
7525 /* TODO: Mark a scan as pending so when hardware initialized
7530 mutex_unlock(&priv
->action_mutex
);
7534 static int ipw2100_wx_get_scan(struct net_device
*dev
,
7535 struct iw_request_info
*info
,
7536 union iwreq_data
*wrqu
, char *extra
)
7539 * This can be called at any time. No action lock required
7542 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7543 return libipw_wx_get_scan(priv
->ieee
, info
, wrqu
, extra
);
7547 * Implementation based on code in hostap-driver v0.1.3 hostap_ioctl.c
7549 static int ipw2100_wx_set_encode(struct net_device
*dev
,
7550 struct iw_request_info
*info
,
7551 union iwreq_data
*wrqu
, char *key
)
7554 * No check of STATUS_INITIALIZED required
7557 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7558 return libipw_wx_set_encode(priv
->ieee
, info
, wrqu
, key
);
7561 static int ipw2100_wx_get_encode(struct net_device
*dev
,
7562 struct iw_request_info
*info
,
7563 union iwreq_data
*wrqu
, char *key
)
7566 * This can be called at any time. No action lock required
7569 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7570 return libipw_wx_get_encode(priv
->ieee
, info
, wrqu
, key
);
7573 static int ipw2100_wx_set_power(struct net_device
*dev
,
7574 struct iw_request_info
*info
,
7575 union iwreq_data
*wrqu
, char *extra
)
7577 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7580 mutex_lock(&priv
->action_mutex
);
7581 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7586 if (wrqu
->power
.disabled
) {
7587 priv
->power_mode
= IPW_POWER_LEVEL(priv
->power_mode
);
7588 err
= ipw2100_set_power_mode(priv
, IPW_POWER_MODE_CAM
);
7589 IPW_DEBUG_WX("SET Power Management Mode -> off\n");
7593 switch (wrqu
->power
.flags
& IW_POWER_MODE
) {
7594 case IW_POWER_ON
: /* If not specified */
7595 case IW_POWER_MODE
: /* If set all mask */
7596 case IW_POWER_ALL_R
: /* If explicitly state all */
7598 default: /* Otherwise we don't support it */
7599 IPW_DEBUG_WX("SET PM Mode: %X not supported.\n",
7605 /* If the user hasn't specified a power management mode yet, default
7607 priv
->power_mode
= IPW_POWER_ENABLED
| priv
->power_mode
;
7608 err
= ipw2100_set_power_mode(priv
, IPW_POWER_LEVEL(priv
->power_mode
));
7610 IPW_DEBUG_WX("SET Power Management Mode -> 0x%02X\n", priv
->power_mode
);
7613 mutex_unlock(&priv
->action_mutex
);
7618 static int ipw2100_wx_get_power(struct net_device
*dev
,
7619 struct iw_request_info
*info
,
7620 union iwreq_data
*wrqu
, char *extra
)
7623 * This can be called at any time. No action lock required
7626 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7628 if (!(priv
->power_mode
& IPW_POWER_ENABLED
))
7629 wrqu
->power
.disabled
= 1;
7631 wrqu
->power
.disabled
= 0;
7632 wrqu
->power
.flags
= 0;
7635 IPW_DEBUG_WX("GET Power Management Mode -> %02X\n", priv
->power_mode
);
7645 static int ipw2100_wx_set_genie(struct net_device
*dev
,
7646 struct iw_request_info
*info
,
7647 union iwreq_data
*wrqu
, char *extra
)
7650 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7651 struct libipw_device
*ieee
= priv
->ieee
;
7654 if (!ieee
->wpa_enabled
)
7657 if (wrqu
->data
.length
> MAX_WPA_IE_LEN
||
7658 (wrqu
->data
.length
&& extra
== NULL
))
7661 if (wrqu
->data
.length
) {
7662 buf
= kmemdup(extra
, wrqu
->data
.length
, GFP_KERNEL
);
7666 kfree(ieee
->wpa_ie
);
7668 ieee
->wpa_ie_len
= wrqu
->data
.length
;
7670 kfree(ieee
->wpa_ie
);
7671 ieee
->wpa_ie
= NULL
;
7672 ieee
->wpa_ie_len
= 0;
7675 ipw2100_wpa_assoc_frame(priv
, ieee
->wpa_ie
, ieee
->wpa_ie_len
);
7681 static int ipw2100_wx_get_genie(struct net_device
*dev
,
7682 struct iw_request_info
*info
,
7683 union iwreq_data
*wrqu
, char *extra
)
7685 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7686 struct libipw_device
*ieee
= priv
->ieee
;
7688 if (ieee
->wpa_ie_len
== 0 || ieee
->wpa_ie
== NULL
) {
7689 wrqu
->data
.length
= 0;
7693 if (wrqu
->data
.length
< ieee
->wpa_ie_len
)
7696 wrqu
->data
.length
= ieee
->wpa_ie_len
;
7697 memcpy(extra
, ieee
->wpa_ie
, ieee
->wpa_ie_len
);
7703 static int ipw2100_wx_set_auth(struct net_device
*dev
,
7704 struct iw_request_info
*info
,
7705 union iwreq_data
*wrqu
, char *extra
)
7707 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7708 struct libipw_device
*ieee
= priv
->ieee
;
7709 struct iw_param
*param
= &wrqu
->param
;
7710 struct lib80211_crypt_data
*crypt
;
7711 unsigned long flags
;
7714 switch (param
->flags
& IW_AUTH_INDEX
) {
7715 case IW_AUTH_WPA_VERSION
:
7716 case IW_AUTH_CIPHER_PAIRWISE
:
7717 case IW_AUTH_CIPHER_GROUP
:
7718 case IW_AUTH_KEY_MGMT
:
7720 * ipw2200 does not use these parameters
7724 case IW_AUTH_TKIP_COUNTERMEASURES
:
7725 crypt
= priv
->ieee
->crypt_info
.crypt
[priv
->ieee
->crypt_info
.tx_keyidx
];
7726 if (!crypt
|| !crypt
->ops
->set_flags
|| !crypt
->ops
->get_flags
)
7729 flags
= crypt
->ops
->get_flags(crypt
->priv
);
7732 flags
|= IEEE80211_CRYPTO_TKIP_COUNTERMEASURES
;
7734 flags
&= ~IEEE80211_CRYPTO_TKIP_COUNTERMEASURES
;
7736 crypt
->ops
->set_flags(flags
, crypt
->priv
);
7740 case IW_AUTH_DROP_UNENCRYPTED
:{
7743 * wpa_supplicant calls set_wpa_enabled when the driver
7744 * is loaded and unloaded, regardless of if WPA is being
7745 * used. No other calls are made which can be used to
7746 * determine if encryption will be used or not prior to
7747 * association being expected. If encryption is not being
7748 * used, drop_unencrypted is set to false, else true -- we
7749 * can use this to determine if the CAP_PRIVACY_ON bit should
7752 struct libipw_security sec
= {
7753 .flags
= SEC_ENABLED
,
7754 .enabled
= param
->value
,
7756 priv
->ieee
->drop_unencrypted
= param
->value
;
7757 /* We only change SEC_LEVEL for open mode. Others
7758 * are set by ipw_wpa_set_encryption.
7760 if (!param
->value
) {
7761 sec
.flags
|= SEC_LEVEL
;
7762 sec
.level
= SEC_LEVEL_0
;
7764 sec
.flags
|= SEC_LEVEL
;
7765 sec
.level
= SEC_LEVEL_1
;
7767 if (priv
->ieee
->set_security
)
7768 priv
->ieee
->set_security(priv
->ieee
->dev
, &sec
);
7772 case IW_AUTH_80211_AUTH_ALG
:
7773 ret
= ipw2100_wpa_set_auth_algs(priv
, param
->value
);
7776 case IW_AUTH_WPA_ENABLED
:
7777 ret
= ipw2100_wpa_enable(priv
, param
->value
);
7780 case IW_AUTH_RX_UNENCRYPTED_EAPOL
:
7781 ieee
->ieee802_1x
= param
->value
;
7784 //case IW_AUTH_ROAMING_CONTROL:
7785 case IW_AUTH_PRIVACY_INVOKED
:
7786 ieee
->privacy_invoked
= param
->value
;
7796 static int ipw2100_wx_get_auth(struct net_device
*dev
,
7797 struct iw_request_info
*info
,
7798 union iwreq_data
*wrqu
, char *extra
)
7800 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7801 struct libipw_device
*ieee
= priv
->ieee
;
7802 struct lib80211_crypt_data
*crypt
;
7803 struct iw_param
*param
= &wrqu
->param
;
7806 switch (param
->flags
& IW_AUTH_INDEX
) {
7807 case IW_AUTH_WPA_VERSION
:
7808 case IW_AUTH_CIPHER_PAIRWISE
:
7809 case IW_AUTH_CIPHER_GROUP
:
7810 case IW_AUTH_KEY_MGMT
:
7812 * wpa_supplicant will control these internally
7817 case IW_AUTH_TKIP_COUNTERMEASURES
:
7818 crypt
= priv
->ieee
->crypt_info
.crypt
[priv
->ieee
->crypt_info
.tx_keyidx
];
7819 if (!crypt
|| !crypt
->ops
->get_flags
) {
7820 IPW_DEBUG_WARNING("Can't get TKIP countermeasures: "
7821 "crypt not set!\n");
7825 param
->value
= (crypt
->ops
->get_flags(crypt
->priv
) &
7826 IEEE80211_CRYPTO_TKIP_COUNTERMEASURES
) ? 1 : 0;
7830 case IW_AUTH_DROP_UNENCRYPTED
:
7831 param
->value
= ieee
->drop_unencrypted
;
7834 case IW_AUTH_80211_AUTH_ALG
:
7835 param
->value
= priv
->ieee
->sec
.auth_mode
;
7838 case IW_AUTH_WPA_ENABLED
:
7839 param
->value
= ieee
->wpa_enabled
;
7842 case IW_AUTH_RX_UNENCRYPTED_EAPOL
:
7843 param
->value
= ieee
->ieee802_1x
;
7846 case IW_AUTH_ROAMING_CONTROL
:
7847 case IW_AUTH_PRIVACY_INVOKED
:
7848 param
->value
= ieee
->privacy_invoked
;
7857 /* SIOCSIWENCODEEXT */
7858 static int ipw2100_wx_set_encodeext(struct net_device
*dev
,
7859 struct iw_request_info
*info
,
7860 union iwreq_data
*wrqu
, char *extra
)
7862 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7863 return libipw_wx_set_encodeext(priv
->ieee
, info
, wrqu
, extra
);
7866 /* SIOCGIWENCODEEXT */
7867 static int ipw2100_wx_get_encodeext(struct net_device
*dev
,
7868 struct iw_request_info
*info
,
7869 union iwreq_data
*wrqu
, char *extra
)
7871 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7872 return libipw_wx_get_encodeext(priv
->ieee
, info
, wrqu
, extra
);
7876 static int ipw2100_wx_set_mlme(struct net_device
*dev
,
7877 struct iw_request_info
*info
,
7878 union iwreq_data
*wrqu
, char *extra
)
7880 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7881 struct iw_mlme
*mlme
= (struct iw_mlme
*)extra
;
7884 reason
= cpu_to_le16(mlme
->reason_code
);
7886 switch (mlme
->cmd
) {
7887 case IW_MLME_DEAUTH
:
7891 case IW_MLME_DISASSOC
:
7892 ipw2100_disassociate_bssid(priv
);
7906 #ifdef CONFIG_IPW2100_MONITOR
7907 static int ipw2100_wx_set_promisc(struct net_device
*dev
,
7908 struct iw_request_info
*info
,
7909 union iwreq_data
*wrqu
, char *extra
)
7911 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7912 int *parms
= (int *)extra
;
7913 int enable
= (parms
[0] > 0);
7916 mutex_lock(&priv
->action_mutex
);
7917 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7923 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
) {
7924 err
= ipw2100_set_channel(priv
, parms
[1], 0);
7927 priv
->channel
= parms
[1];
7928 err
= ipw2100_switch_mode(priv
, IW_MODE_MONITOR
);
7930 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
)
7931 err
= ipw2100_switch_mode(priv
, priv
->last_mode
);
7934 mutex_unlock(&priv
->action_mutex
);
7938 static int ipw2100_wx_reset(struct net_device
*dev
,
7939 struct iw_request_info
*info
,
7940 union iwreq_data
*wrqu
, char *extra
)
7942 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7943 if (priv
->status
& STATUS_INITIALIZED
)
7944 schedule_reset(priv
);
7950 static int ipw2100_wx_set_powermode(struct net_device
*dev
,
7951 struct iw_request_info
*info
,
7952 union iwreq_data
*wrqu
, char *extra
)
7954 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7955 int err
= 0, mode
= *(int *)extra
;
7957 mutex_lock(&priv
->action_mutex
);
7958 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7963 if ((mode
< 0) || (mode
> POWER_MODES
))
7964 mode
= IPW_POWER_AUTO
;
7966 if (IPW_POWER_LEVEL(priv
->power_mode
) != mode
)
7967 err
= ipw2100_set_power_mode(priv
, mode
);
7969 mutex_unlock(&priv
->action_mutex
);
7973 #define MAX_POWER_STRING 80
7974 static int ipw2100_wx_get_powermode(struct net_device
*dev
,
7975 struct iw_request_info
*info
,
7976 union iwreq_data
*wrqu
, char *extra
)
7979 * This can be called at any time. No action lock required
7982 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7983 int level
= IPW_POWER_LEVEL(priv
->power_mode
);
7984 s32 timeout
, period
;
7986 if (!(priv
->power_mode
& IPW_POWER_ENABLED
)) {
7987 snprintf(extra
, MAX_POWER_STRING
,
7988 "Power save level: %d (Off)", level
);
7991 case IPW_POWER_MODE_CAM
:
7992 snprintf(extra
, MAX_POWER_STRING
,
7993 "Power save level: %d (None)", level
);
7995 case IPW_POWER_AUTO
:
7996 snprintf(extra
, MAX_POWER_STRING
,
7997 "Power save level: %d (Auto)", level
);
8000 timeout
= timeout_duration
[level
- 1] / 1000;
8001 period
= period_duration
[level
- 1] / 1000;
8002 snprintf(extra
, MAX_POWER_STRING
,
8003 "Power save level: %d "
8004 "(Timeout %dms, Period %dms)",
8005 level
, timeout
, period
);
8009 wrqu
->data
.length
= strlen(extra
) + 1;
8014 static int ipw2100_wx_set_preamble(struct net_device
*dev
,
8015 struct iw_request_info
*info
,
8016 union iwreq_data
*wrqu
, char *extra
)
8018 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8019 int err
, mode
= *(int *)extra
;
8021 mutex_lock(&priv
->action_mutex
);
8022 if (!(priv
->status
& STATUS_INITIALIZED
)) {
8028 priv
->config
|= CFG_LONG_PREAMBLE
;
8030 priv
->config
&= ~CFG_LONG_PREAMBLE
;
8036 err
= ipw2100_system_config(priv
, 0);
8039 mutex_unlock(&priv
->action_mutex
);
8043 static int ipw2100_wx_get_preamble(struct net_device
*dev
,
8044 struct iw_request_info
*info
,
8045 union iwreq_data
*wrqu
, char *extra
)
8048 * This can be called at any time. No action lock required
8051 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8053 if (priv
->config
& CFG_LONG_PREAMBLE
)
8054 snprintf(wrqu
->name
, IFNAMSIZ
, "long (1)");
8056 snprintf(wrqu
->name
, IFNAMSIZ
, "auto (0)");
8061 #ifdef CONFIG_IPW2100_MONITOR
8062 static int ipw2100_wx_set_crc_check(struct net_device
*dev
,
8063 struct iw_request_info
*info
,
8064 union iwreq_data
*wrqu
, char *extra
)
8066 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8067 int err
, mode
= *(int *)extra
;
8069 mutex_lock(&priv
->action_mutex
);
8070 if (!(priv
->status
& STATUS_INITIALIZED
)) {
8076 priv
->config
|= CFG_CRC_CHECK
;
8078 priv
->config
&= ~CFG_CRC_CHECK
;
8086 mutex_unlock(&priv
->action_mutex
);
8090 static int ipw2100_wx_get_crc_check(struct net_device
*dev
,
8091 struct iw_request_info
*info
,
8092 union iwreq_data
*wrqu
, char *extra
)
8095 * This can be called at any time. No action lock required
8098 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8100 if (priv
->config
& CFG_CRC_CHECK
)
8101 snprintf(wrqu
->name
, IFNAMSIZ
, "CRC checked (1)");
8103 snprintf(wrqu
->name
, IFNAMSIZ
, "CRC ignored (0)");
8107 #endif /* CONFIG_IPW2100_MONITOR */
8109 static iw_handler ipw2100_wx_handlers
[] = {
8110 NULL
, /* SIOCSIWCOMMIT */
8111 ipw2100_wx_get_name
, /* SIOCGIWNAME */
8112 NULL
, /* SIOCSIWNWID */
8113 NULL
, /* SIOCGIWNWID */
8114 ipw2100_wx_set_freq
, /* SIOCSIWFREQ */
8115 ipw2100_wx_get_freq
, /* SIOCGIWFREQ */
8116 ipw2100_wx_set_mode
, /* SIOCSIWMODE */
8117 ipw2100_wx_get_mode
, /* SIOCGIWMODE */
8118 NULL
, /* SIOCSIWSENS */
8119 NULL
, /* SIOCGIWSENS */
8120 NULL
, /* SIOCSIWRANGE */
8121 ipw2100_wx_get_range
, /* SIOCGIWRANGE */
8122 NULL
, /* SIOCSIWPRIV */
8123 NULL
, /* SIOCGIWPRIV */
8124 NULL
, /* SIOCSIWSTATS */
8125 NULL
, /* SIOCGIWSTATS */
8126 NULL
, /* SIOCSIWSPY */
8127 NULL
, /* SIOCGIWSPY */
8128 NULL
, /* SIOCGIWTHRSPY */
8129 NULL
, /* SIOCWIWTHRSPY */
8130 ipw2100_wx_set_wap
, /* SIOCSIWAP */
8131 ipw2100_wx_get_wap
, /* SIOCGIWAP */
8132 ipw2100_wx_set_mlme
, /* SIOCSIWMLME */
8133 NULL
, /* SIOCGIWAPLIST -- deprecated */
8134 ipw2100_wx_set_scan
, /* SIOCSIWSCAN */
8135 ipw2100_wx_get_scan
, /* SIOCGIWSCAN */
8136 ipw2100_wx_set_essid
, /* SIOCSIWESSID */
8137 ipw2100_wx_get_essid
, /* SIOCGIWESSID */
8138 ipw2100_wx_set_nick
, /* SIOCSIWNICKN */
8139 ipw2100_wx_get_nick
, /* SIOCGIWNICKN */
8140 NULL
, /* -- hole -- */
8141 NULL
, /* -- hole -- */
8142 ipw2100_wx_set_rate
, /* SIOCSIWRATE */
8143 ipw2100_wx_get_rate
, /* SIOCGIWRATE */
8144 ipw2100_wx_set_rts
, /* SIOCSIWRTS */
8145 ipw2100_wx_get_rts
, /* SIOCGIWRTS */
8146 ipw2100_wx_set_frag
, /* SIOCSIWFRAG */
8147 ipw2100_wx_get_frag
, /* SIOCGIWFRAG */
8148 ipw2100_wx_set_txpow
, /* SIOCSIWTXPOW */
8149 ipw2100_wx_get_txpow
, /* SIOCGIWTXPOW */
8150 ipw2100_wx_set_retry
, /* SIOCSIWRETRY */
8151 ipw2100_wx_get_retry
, /* SIOCGIWRETRY */
8152 ipw2100_wx_set_encode
, /* SIOCSIWENCODE */
8153 ipw2100_wx_get_encode
, /* SIOCGIWENCODE */
8154 ipw2100_wx_set_power
, /* SIOCSIWPOWER */
8155 ipw2100_wx_get_power
, /* SIOCGIWPOWER */
8156 NULL
, /* -- hole -- */
8157 NULL
, /* -- hole -- */
8158 ipw2100_wx_set_genie
, /* SIOCSIWGENIE */
8159 ipw2100_wx_get_genie
, /* SIOCGIWGENIE */
8160 ipw2100_wx_set_auth
, /* SIOCSIWAUTH */
8161 ipw2100_wx_get_auth
, /* SIOCGIWAUTH */
8162 ipw2100_wx_set_encodeext
, /* SIOCSIWENCODEEXT */
8163 ipw2100_wx_get_encodeext
, /* SIOCGIWENCODEEXT */
8164 NULL
, /* SIOCSIWPMKSA */
8167 #define IPW2100_PRIV_SET_MONITOR SIOCIWFIRSTPRIV
8168 #define IPW2100_PRIV_RESET SIOCIWFIRSTPRIV+1
8169 #define IPW2100_PRIV_SET_POWER SIOCIWFIRSTPRIV+2
8170 #define IPW2100_PRIV_GET_POWER SIOCIWFIRSTPRIV+3
8171 #define IPW2100_PRIV_SET_LONGPREAMBLE SIOCIWFIRSTPRIV+4
8172 #define IPW2100_PRIV_GET_LONGPREAMBLE SIOCIWFIRSTPRIV+5
8173 #define IPW2100_PRIV_SET_CRC_CHECK SIOCIWFIRSTPRIV+6
8174 #define IPW2100_PRIV_GET_CRC_CHECK SIOCIWFIRSTPRIV+7
8176 static const struct iw_priv_args ipw2100_private_args
[] = {
8178 #ifdef CONFIG_IPW2100_MONITOR
8180 IPW2100_PRIV_SET_MONITOR
,
8181 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 2, 0, "monitor"},
8184 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 0, 0, "reset"},
8185 #endif /* CONFIG_IPW2100_MONITOR */
8188 IPW2100_PRIV_SET_POWER
,
8189 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 1, 0, "set_power"},
8191 IPW2100_PRIV_GET_POWER
,
8192 0, IW_PRIV_TYPE_CHAR
| IW_PRIV_SIZE_FIXED
| MAX_POWER_STRING
,
8195 IPW2100_PRIV_SET_LONGPREAMBLE
,
8196 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 1, 0, "set_preamble"},
8198 IPW2100_PRIV_GET_LONGPREAMBLE
,
8199 0, IW_PRIV_TYPE_CHAR
| IW_PRIV_SIZE_FIXED
| IFNAMSIZ
, "get_preamble"},
8200 #ifdef CONFIG_IPW2100_MONITOR
8202 IPW2100_PRIV_SET_CRC_CHECK
,
8203 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 1, 0, "set_crc_check"},
8205 IPW2100_PRIV_GET_CRC_CHECK
,
8206 0, IW_PRIV_TYPE_CHAR
| IW_PRIV_SIZE_FIXED
| IFNAMSIZ
, "get_crc_check"},
8207 #endif /* CONFIG_IPW2100_MONITOR */
8210 static iw_handler ipw2100_private_handler
[] = {
8211 #ifdef CONFIG_IPW2100_MONITOR
8212 ipw2100_wx_set_promisc
,
8214 #else /* CONFIG_IPW2100_MONITOR */
8217 #endif /* CONFIG_IPW2100_MONITOR */
8218 ipw2100_wx_set_powermode
,
8219 ipw2100_wx_get_powermode
,
8220 ipw2100_wx_set_preamble
,
8221 ipw2100_wx_get_preamble
,
8222 #ifdef CONFIG_IPW2100_MONITOR
8223 ipw2100_wx_set_crc_check
,
8224 ipw2100_wx_get_crc_check
,
8225 #else /* CONFIG_IPW2100_MONITOR */
8228 #endif /* CONFIG_IPW2100_MONITOR */
8232 * Get wireless statistics.
8233 * Called by /proc/net/wireless
8234 * Also called by SIOCGIWSTATS
8236 static struct iw_statistics
*ipw2100_wx_wireless_stats(struct net_device
*dev
)
8251 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8252 struct iw_statistics
*wstats
;
8253 u32 rssi
, tx_retries
, missed_beacons
, tx_failures
;
8254 u32 ord_len
= sizeof(u32
);
8257 return (struct iw_statistics
*)NULL
;
8259 wstats
= &priv
->wstats
;
8261 /* if hw is disabled, then ipw2100_get_ordinal() can't be called.
8262 * ipw2100_wx_wireless_stats seems to be called before fw is
8263 * initialized. STATUS_ASSOCIATED will only be set if the hw is up
8264 * and associated; if not associcated, the values are all meaningless
8265 * anyway, so set them all to NULL and INVALID */
8266 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
8267 wstats
->miss
.beacon
= 0;
8268 wstats
->discard
.retries
= 0;
8269 wstats
->qual
.qual
= 0;
8270 wstats
->qual
.level
= 0;
8271 wstats
->qual
.noise
= 0;
8272 wstats
->qual
.updated
= 7;
8273 wstats
->qual
.updated
|= IW_QUAL_NOISE_INVALID
|
8274 IW_QUAL_QUAL_INVALID
| IW_QUAL_LEVEL_INVALID
;
8278 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_PERCENT_MISSED_BCNS
,
8279 &missed_beacons
, &ord_len
))
8280 goto fail_get_ordinal
;
8282 /* If we don't have a connection the quality and level is 0 */
8283 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
8284 wstats
->qual
.qual
= 0;
8285 wstats
->qual
.level
= 0;
8287 if (ipw2100_get_ordinal(priv
, IPW_ORD_RSSI_AVG_CURR
,
8289 goto fail_get_ordinal
;
8290 wstats
->qual
.level
= rssi
+ IPW2100_RSSI_TO_DBM
;
8292 rssi_qual
= rssi
* POOR
/ 10;
8294 rssi_qual
= (rssi
- 10) * (FAIR
- POOR
) / 5 + POOR
;
8296 rssi_qual
= (rssi
- 15) * (GOOD
- FAIR
) / 5 + FAIR
;
8298 rssi_qual
= (rssi
- 20) * (VERY_GOOD
- GOOD
) /
8301 rssi_qual
= (rssi
- 30) * (PERFECT
- VERY_GOOD
) /
8304 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_PERCENT_RETRIES
,
8305 &tx_retries
, &ord_len
))
8306 goto fail_get_ordinal
;
8308 if (tx_retries
> 75)
8309 tx_qual
= (90 - tx_retries
) * POOR
/ 15;
8310 else if (tx_retries
> 70)
8311 tx_qual
= (75 - tx_retries
) * (FAIR
- POOR
) / 5 + POOR
;
8312 else if (tx_retries
> 65)
8313 tx_qual
= (70 - tx_retries
) * (GOOD
- FAIR
) / 5 + FAIR
;
8314 else if (tx_retries
> 50)
8315 tx_qual
= (65 - tx_retries
) * (VERY_GOOD
- GOOD
) /
8318 tx_qual
= (50 - tx_retries
) *
8319 (PERFECT
- VERY_GOOD
) / 50 + VERY_GOOD
;
8321 if (missed_beacons
> 50)
8322 beacon_qual
= (60 - missed_beacons
) * POOR
/ 10;
8323 else if (missed_beacons
> 40)
8324 beacon_qual
= (50 - missed_beacons
) * (FAIR
- POOR
) /
8326 else if (missed_beacons
> 32)
8327 beacon_qual
= (40 - missed_beacons
) * (GOOD
- FAIR
) /
8329 else if (missed_beacons
> 20)
8330 beacon_qual
= (32 - missed_beacons
) *
8331 (VERY_GOOD
- GOOD
) / 20 + GOOD
;
8333 beacon_qual
= (20 - missed_beacons
) *
8334 (PERFECT
- VERY_GOOD
) / 20 + VERY_GOOD
;
8336 quality
= min(tx_qual
, rssi_qual
);
8337 quality
= min(beacon_qual
, quality
);
8339 #ifdef CONFIG_IPW2100_DEBUG
8340 if (beacon_qual
== quality
)
8341 IPW_DEBUG_WX("Quality clamped by Missed Beacons\n");
8342 else if (tx_qual
== quality
)
8343 IPW_DEBUG_WX("Quality clamped by Tx Retries\n");
8344 else if (quality
!= 100)
8345 IPW_DEBUG_WX("Quality clamped by Signal Strength\n");
8347 IPW_DEBUG_WX("Quality not clamped.\n");
8350 wstats
->qual
.qual
= quality
;
8351 wstats
->qual
.level
= rssi
+ IPW2100_RSSI_TO_DBM
;
8354 wstats
->qual
.noise
= 0;
8355 wstats
->qual
.updated
= 7;
8356 wstats
->qual
.updated
|= IW_QUAL_NOISE_INVALID
;
8358 /* FIXME: this is percent and not a # */
8359 wstats
->miss
.beacon
= missed_beacons
;
8361 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_TX_FAILURES
,
8362 &tx_failures
, &ord_len
))
8363 goto fail_get_ordinal
;
8364 wstats
->discard
.retries
= tx_failures
;
8369 IPW_DEBUG_WX("failed querying ordinals.\n");
8371 return (struct iw_statistics
*)NULL
;
8374 static struct iw_handler_def ipw2100_wx_handler_def
= {
8375 .standard
= ipw2100_wx_handlers
,
8376 .num_standard
= ARRAY_SIZE(ipw2100_wx_handlers
),
8377 .num_private
= ARRAY_SIZE(ipw2100_private_handler
),
8378 .num_private_args
= ARRAY_SIZE(ipw2100_private_args
),
8379 .private = (iw_handler
*) ipw2100_private_handler
,
8380 .private_args
= (struct iw_priv_args
*)ipw2100_private_args
,
8381 .get_wireless_stats
= ipw2100_wx_wireless_stats
,
8384 static void ipw2100_wx_event_work(struct work_struct
*work
)
8386 struct ipw2100_priv
*priv
=
8387 container_of(work
, struct ipw2100_priv
, wx_event_work
.work
);
8388 union iwreq_data wrqu
;
8389 unsigned int len
= ETH_ALEN
;
8391 if (priv
->status
& STATUS_STOPPING
)
8394 mutex_lock(&priv
->action_mutex
);
8396 IPW_DEBUG_WX("enter\n");
8398 mutex_unlock(&priv
->action_mutex
);
8400 wrqu
.ap_addr
.sa_family
= ARPHRD_ETHER
;
8402 /* Fetch BSSID from the hardware */
8403 if (!(priv
->status
& (STATUS_ASSOCIATING
| STATUS_ASSOCIATED
)) ||
8404 priv
->status
& STATUS_RF_KILL_MASK
||
8405 ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_AP_BSSID
,
8406 &priv
->bssid
, &len
)) {
8407 memset(wrqu
.ap_addr
.sa_data
, 0, ETH_ALEN
);
8409 /* We now have the BSSID, so can finish setting to the full
8410 * associated state */
8411 memcpy(wrqu
.ap_addr
.sa_data
, priv
->bssid
, ETH_ALEN
);
8412 memcpy(priv
->ieee
->bssid
, priv
->bssid
, ETH_ALEN
);
8413 priv
->status
&= ~STATUS_ASSOCIATING
;
8414 priv
->status
|= STATUS_ASSOCIATED
;
8415 netif_carrier_on(priv
->net_dev
);
8416 netif_wake_queue(priv
->net_dev
);
8419 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
8420 IPW_DEBUG_WX("Configuring ESSID\n");
8421 mutex_lock(&priv
->action_mutex
);
8422 /* This is a disassociation event, so kick the firmware to
8423 * look for another AP */
8424 if (priv
->config
& CFG_STATIC_ESSID
)
8425 ipw2100_set_essid(priv
, priv
->essid
, priv
->essid_len
,
8428 ipw2100_set_essid(priv
, NULL
, 0, 0);
8429 mutex_unlock(&priv
->action_mutex
);
8432 wireless_send_event(priv
->net_dev
, SIOCGIWAP
, &wrqu
, NULL
);
8435 #define IPW2100_FW_MAJOR_VERSION 1
8436 #define IPW2100_FW_MINOR_VERSION 3
8438 #define IPW2100_FW_MINOR(x) ((x & 0xff) >> 8)
8439 #define IPW2100_FW_MAJOR(x) (x & 0xff)
8441 #define IPW2100_FW_VERSION ((IPW2100_FW_MINOR_VERSION << 8) | \
8442 IPW2100_FW_MAJOR_VERSION)
8444 #define IPW2100_FW_PREFIX "ipw2100-" __stringify(IPW2100_FW_MAJOR_VERSION) \
8445 "." __stringify(IPW2100_FW_MINOR_VERSION)
8447 #define IPW2100_FW_NAME(x) IPW2100_FW_PREFIX "" x ".fw"
8451 BINARY FIRMWARE HEADER FORMAT
8455 2 2 mode == 0:BSS,1:IBSS,2:MONITOR
8458 C fw_len firmware data
8459 12 + fw_len uc_len microcode data
8463 struct ipw2100_fw_header
{
8466 unsigned int fw_size
;
8467 unsigned int uc_size
;
8470 static int ipw2100_mod_firmware_load(struct ipw2100_fw
*fw
)
8472 struct ipw2100_fw_header
*h
=
8473 (struct ipw2100_fw_header
*)fw
->fw_entry
->data
;
8475 if (IPW2100_FW_MAJOR(h
->version
) != IPW2100_FW_MAJOR_VERSION
) {
8476 printk(KERN_WARNING DRV_NAME
": Firmware image not compatible "
8477 "(detected version id of %u). "
8478 "See Documentation/networking/README.ipw2100\n",
8483 fw
->version
= h
->version
;
8484 fw
->fw
.data
= fw
->fw_entry
->data
+ sizeof(struct ipw2100_fw_header
);
8485 fw
->fw
.size
= h
->fw_size
;
8486 fw
->uc
.data
= fw
->fw
.data
+ h
->fw_size
;
8487 fw
->uc
.size
= h
->uc_size
;
8492 static int ipw2100_get_firmware(struct ipw2100_priv
*priv
,
8493 struct ipw2100_fw
*fw
)
8498 IPW_DEBUG_INFO("%s: Using hotplug firmware load.\n",
8499 priv
->net_dev
->name
);
8501 switch (priv
->ieee
->iw_mode
) {
8503 fw_name
= IPW2100_FW_NAME("-i");
8505 #ifdef CONFIG_IPW2100_MONITOR
8506 case IW_MODE_MONITOR
:
8507 fw_name
= IPW2100_FW_NAME("-p");
8512 fw_name
= IPW2100_FW_NAME("");
8516 rc
= request_firmware(&fw
->fw_entry
, fw_name
, &priv
->pci_dev
->dev
);
8519 printk(KERN_ERR DRV_NAME
": "
8520 "%s: Firmware '%s' not available or load failed.\n",
8521 priv
->net_dev
->name
, fw_name
);
8524 IPW_DEBUG_INFO("firmware data %p size %zd\n", fw
->fw_entry
->data
,
8525 fw
->fw_entry
->size
);
8527 ipw2100_mod_firmware_load(fw
);
8532 MODULE_FIRMWARE(IPW2100_FW_NAME("-i"));
8533 #ifdef CONFIG_IPW2100_MONITOR
8534 MODULE_FIRMWARE(IPW2100_FW_NAME("-p"));
8536 MODULE_FIRMWARE(IPW2100_FW_NAME(""));
8538 static void ipw2100_release_firmware(struct ipw2100_priv
*priv
,
8539 struct ipw2100_fw
*fw
)
8543 release_firmware(fw
->fw_entry
);
8544 fw
->fw_entry
= NULL
;
8547 static int ipw2100_get_fwversion(struct ipw2100_priv
*priv
, char *buf
,
8550 char ver
[MAX_FW_VERSION_LEN
];
8551 u32 len
= MAX_FW_VERSION_LEN
;
8554 /* firmware version is an ascii string (max len of 14) */
8555 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_FW_VER_NUM
, ver
, &len
))
8560 for (i
= 0; i
< len
; i
++)
8566 static int ipw2100_get_ucodeversion(struct ipw2100_priv
*priv
, char *buf
,
8570 u32 len
= sizeof(ver
);
8571 /* microcode version is a 32 bit integer */
8572 if (ipw2100_get_ordinal(priv
, IPW_ORD_UCODE_VERSION
, &ver
, &len
))
8574 return snprintf(buf
, max
, "%08X", ver
);
8578 * On exit, the firmware will have been freed from the fw list
8580 static int ipw2100_fw_download(struct ipw2100_priv
*priv
, struct ipw2100_fw
*fw
)
8582 /* firmware is constructed of N contiguous entries, each entry is
8586 * 0 4 address to write to
8587 * 4 2 length of data run
8593 const unsigned char *firmware_data
= fw
->fw
.data
;
8594 unsigned int firmware_data_left
= fw
->fw
.size
;
8596 while (firmware_data_left
> 0) {
8597 addr
= *(u32
*) (firmware_data
);
8599 firmware_data_left
-= 4;
8601 len
= *(u16
*) (firmware_data
);
8603 firmware_data_left
-= 2;
8606 printk(KERN_ERR DRV_NAME
": "
8607 "Invalid firmware run-length of %d bytes\n",
8612 write_nic_memory(priv
->net_dev
, addr
, len
, firmware_data
);
8613 firmware_data
+= len
;
8614 firmware_data_left
-= len
;
8620 struct symbol_alive_response
{
8629 u16 clock_settle_time
; // 1us LSB
8630 u16 powerup_settle_time
; // 1us LSB
8631 u16 hop_settle_time
; // 1us LSB
8632 u8 date
[3]; // month, day, year
8633 u8 time
[2]; // hours, minutes
8637 static int ipw2100_ucode_download(struct ipw2100_priv
*priv
,
8638 struct ipw2100_fw
*fw
)
8640 struct net_device
*dev
= priv
->net_dev
;
8641 const unsigned char *microcode_data
= fw
->uc
.data
;
8642 unsigned int microcode_data_left
= fw
->uc
.size
;
8643 void __iomem
*reg
= (void __iomem
*)dev
->base_addr
;
8645 struct symbol_alive_response response
;
8649 /* Symbol control */
8650 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x703);
8652 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x707);
8656 write_nic_byte(dev
, 0x210014, 0x72); /* fifo width =16 */
8658 write_nic_byte(dev
, 0x210014, 0x72); /* fifo width =16 */
8661 /* EN_CS_ACCESS bit to reset control store pointer */
8662 write_nic_byte(dev
, 0x210000, 0x40);
8664 write_nic_byte(dev
, 0x210000, 0x0);
8666 write_nic_byte(dev
, 0x210000, 0x40);
8669 /* copy microcode from buffer into Symbol */
8671 while (microcode_data_left
> 0) {
8672 write_nic_byte(dev
, 0x210010, *microcode_data
++);
8673 write_nic_byte(dev
, 0x210010, *microcode_data
++);
8674 microcode_data_left
-= 2;
8677 /* EN_CS_ACCESS bit to reset the control store pointer */
8678 write_nic_byte(dev
, 0x210000, 0x0);
8681 /* Enable System (Reg 0)
8682 * first enable causes garbage in RX FIFO */
8683 write_nic_byte(dev
, 0x210000, 0x0);
8685 write_nic_byte(dev
, 0x210000, 0x80);
8688 /* Reset External Baseband Reg */
8689 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x703);
8691 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x707);
8694 /* HW Config (Reg 5) */
8695 write_nic_byte(dev
, 0x210014, 0x72); // fifo width =16
8697 write_nic_byte(dev
, 0x210014, 0x72); // fifo width =16
8700 /* Enable System (Reg 0)
8701 * second enable should be OK */
8702 write_nic_byte(dev
, 0x210000, 0x00); // clear enable system
8704 write_nic_byte(dev
, 0x210000, 0x80); // set enable system
8706 /* check Symbol is enabled - upped this from 5 as it wasn't always
8707 * catching the update */
8708 for (i
= 0; i
< 10; i
++) {
8711 /* check Dino is enabled bit */
8712 read_nic_byte(dev
, 0x210000, &data
);
8718 printk(KERN_ERR DRV_NAME
": %s: Error initializing Symbol\n",
8723 /* Get Symbol alive response */
8724 for (i
= 0; i
< 30; i
++) {
8725 /* Read alive response structure */
8727 j
< (sizeof(struct symbol_alive_response
) >> 1); j
++)
8728 read_nic_word(dev
, 0x210004, ((u16
*) & response
) + j
);
8730 if ((response
.cmd_id
== 1) && (response
.ucode_valid
== 0x1))
8736 printk(KERN_ERR DRV_NAME
8737 ": %s: No response from Symbol - hw not alive\n",
8739 printk_buf(IPW_DL_ERROR
, (u8
*) & response
, sizeof(response
));