?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Merge branch 'for-linus' of git://git.infradead.org/users/sameo/mfd-2.6
[linux-btrfs-devel.git] / drivers / scsi / arm / fas216.h
blob84b7127c01212409a97f793d6f87a8bdb0a17c80
1 /*
2 * linux/drivers/acorn/scsi/fas216.h
3 *
4 * Copyright (C) 1997-2000 Russell King
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 *
10 * FAS216 generic driver
11 */
12 #ifndef FAS216_H
13 #define FAS216_H
14
15 #ifndef NO_IRQ
16 #define NO_IRQ 255
17 #endif
18
19 #include <scsi/scsi_eh.h>
20
21 #include "queue.h"
22 #include "msgqueue.h"
23
24 /* FAS register definitions */
25
26 /* transfer count low */
27 #define REG_CTCL (0)
28 #define REG_STCL (0)
29
30 /* transfer count medium */
31 #define REG_CTCM (1)
32 #define REG_STCM (1)
33
34 /* fifo data */
35 #define REG_FF (2)
36
37 /* command */
38 #define REG_CMD (3)
39 #define CMD_NOP 0x00
40 #define CMD_FLUSHFIFO 0x01
41 #define CMD_RESETCHIP 0x02
42 #define CMD_RESETSCSI 0x03
43
44 #define CMD_TRANSFERINFO 0x10
45 #define CMD_INITCMDCOMPLETE 0x11
46 #define CMD_MSGACCEPTED 0x12
47 #define CMD_PADBYTES 0x18
48 #define CMD_SETATN 0x1a
49 #define CMD_RSETATN 0x1b
50
51 #define CMD_SELECTWOATN 0x41
52 #define CMD_SELECTATN 0x42
53 #define CMD_SELECTATNSTOP 0x43
54 #define CMD_ENABLESEL 0x44
55 #define CMD_DISABLESEL 0x45
56 #define CMD_SELECTATN3 0x46
57 #define CMD_RESEL3 0x47
58
59 #define CMD_WITHDMA 0x80
60
61 /* status register (read) */
62 #define REG_STAT (4)
63 #define STAT_IO (1 << 0) /* IO phase */
64 #define STAT_CD (1 << 1) /* CD phase */
65 #define STAT_MSG (1 << 2) /* MSG phase */
66 #define STAT_TRANSFERDONE (1 << 3) /* Transfer completed */
67 #define STAT_TRANSFERCNTZ (1 << 4) /* Transfer counter is zero */
68 #define STAT_PARITYERROR (1 << 5) /* Parity error */
69 #define STAT_REALBAD (1 << 6) /* Something bad */
70 #define STAT_INT (1 << 7) /* Interrupt */
71
72 #define STAT_BUSMASK (STAT_MSG|STAT_CD|STAT_IO)
73 #define STAT_DATAOUT (0) /* Data out */
74 #define STAT_DATAIN (STAT_IO) /* Data in */
75 #define STAT_COMMAND (STAT_CD) /* Command out */
76 #define STAT_STATUS (STAT_CD|STAT_IO) /* Status In */
77 #define STAT_MESGOUT (STAT_MSG|STAT_CD) /* Message out */
78 #define STAT_MESGIN (STAT_MSG|STAT_CD|STAT_IO) /* Message In */
79
80 /* bus ID for select / reselect */
81 #define REG_SDID (4)
82 #define BUSID(target) ((target) & 7)
83
84 /* Interrupt status register (read) */
85 #define REG_INST (5)
86 #define INST_SELWOATN (1 << 0) /* Select w/o ATN */
87 #define INST_SELATN (1 << 1) /* Select w/ATN */
88 #define INST_RESELECTED (1 << 2) /* Reselected */
89 #define INST_FUNCDONE (1 << 3) /* Function done */
90 #define INST_BUSSERVICE (1 << 4) /* Bus service */
91 #define INST_DISCONNECT (1 << 5) /* Disconnect */
92 #define INST_ILLEGALCMD (1 << 6) /* Illegal command */
93 #define INST_BUSRESET (1 << 7) /* SCSI Bus reset */
94
95 /* Timeout register (write) */
96 #define REG_STIM (5)
97
98 /* Sequence step register (read) */
99 #define REG_IS (6)
100 #define IS_BITS 0x07
101 #define IS_SELARB 0x00 /* Select & Arb ok */
102 #define IS_MSGBYTESENT 0x01 /* One byte message sent*/
103 #define IS_NOTCOMMAND 0x02 /* Not in command state */
104 #define IS_EARLYPHASE 0x03 /* Early phase change */
105 #define IS_COMPLETE 0x04 /* Command ok */
106 #define IS_SOF 0x08 /* Sync off flag */
107
108 /* Transfer period step (write) */
109 #define REG_STP (6)
110
111 /* Synchronous Offset (write) */
112 #define REG_SOF (7)
113
114 /* Fifo state register (read) */
115 #define REG_CFIS (7)
116 #define CFIS_CF 0x1f /* Num bytes in FIFO */
117 #define CFIS_IS 0xe0 /* Step */
118
119 /* config register 1 */
120 #define REG_CNTL1 (8)
121 #define CNTL1_CID (7 << 0) /* Chip ID */
122 #define CNTL1_STE (1 << 3) /* Self test enable */
123 #define CNTL1_PERE (1 << 4) /* Parity enable reporting en. */
124 #define CNTL1_PTE (1 << 5) /* Parity test enable */
125 #define CNTL1_DISR (1 << 6) /* Disable Irq on SCSI reset */
126 #define CNTL1_ETM (1 << 7) /* Extended Timing Mode */
127
128 /* Clock conversion factor (read) */
129 #define REG_CLKF (9)
130 #define CLKF_F37MHZ 0x00 /* 35.01 - 40 MHz */
131 #define CLKF_F10MHZ 0x02 /* 10 MHz */
132 #define CLKF_F12MHZ 0x03 /* 10.01 - 15 MHz */
133 #define CLKF_F17MHZ 0x04 /* 15.01 - 20 MHz */
134 #define CLKF_F22MHZ 0x05 /* 20.01 - 25 MHz */
135 #define CLKF_F27MHZ 0x06 /* 25.01 - 30 MHz */
136 #define CLKF_F32MHZ 0x07 /* 30.01 - 35 MHz */
137
138 /* Chip test register (write) */
139 #define REG_FTM (10)
140 #define TEST_FTM 0x01 /* Force target mode */
141 #define TEST_FIM 0x02 /* Force initiator mode */
142 #define TEST_FHI 0x04 /* Force high impedance mode */
143
144 /* Configuration register 2 (read/write) */
145 #define REG_CNTL2 (11)
146 #define CNTL2_PGDP (1 << 0) /* Pass Th/Generate Data Parity */
147 #define CNTL2_PGRP (1 << 1) /* Pass Th/Generate Reg Parity */
148 #define CNTL2_ACDPE (1 << 2) /* Abort on Cmd/Data Parity Err */
149 #define CNTL2_S2FE (1 << 3) /* SCSI2 Features Enable */
150 #define CNTL2_TSDR (1 << 4) /* Tristate DREQ */
151 #define CNTL2_SBO (1 << 5) /* Select Byte Order */
152 #define CNTL2_ENF (1 << 6) /* Enable features */
153 #define CNTL2_DAE (1 << 7) /* Data Alignment Enable */
154
155 /* Configuration register 3 (read/write) */
156 #define REG_CNTL3 (12)
157 #define CNTL3_BS8 (1 << 0) /* Burst size 8 */
158 #define CNTL3_MDM (1 << 1) /* Modify DMA mode */
159 #define CNTL3_LBTM (1 << 2) /* Last Byte Transfer mode */
160 #define CNTL3_FASTCLK (1 << 3) /* Fast SCSI clocking */
161 #define CNTL3_FASTSCSI (1 << 4) /* Fast SCSI */
162 #define CNTL3_G2CB (1 << 5) /* Group2 SCSI support */
163 #define CNTL3_QTAG (1 << 6) /* Enable 3 byte msgs */
164 #define CNTL3_ADIDCHK (1 << 7) /* Additional ID check */
165
166 /* High transfer count (read/write) */
167 #define REG_CTCH (14)
168 #define REG_STCH (14)
169
170 /* ID register (read only) */
171 #define REG_ID (14)
172
173 /* Data alignment */
174 #define REG_DAL (15)
175
176 typedef enum {
177 PHASE_IDLE, /* we're not planning on doing anything */
178 PHASE_SELECTION, /* selecting a device */
179 PHASE_SELSTEPS, /* selection with command steps */
180 PHASE_COMMAND, /* command sent */
181 PHASE_MESSAGESENT, /* selected, and we're sending cmd */
182 PHASE_DATAOUT, /* data out to device */
183 PHASE_DATAIN, /* data in from device */
184 PHASE_MSGIN, /* message in from device */
185 PHASE_MSGIN_DISCONNECT, /* disconnecting from bus */
186 PHASE_MSGOUT, /* after message out phase */
187 PHASE_MSGOUT_EXPECT, /* expecting message out */
188 PHASE_STATUS, /* status from device */
189 PHASE_DONE /* Command complete */
190 } phase_t;
191
192 typedef enum {
193 DMA_OUT, /* DMA from memory to chip */
194 DMA_IN /* DMA from chip to memory */
195 } fasdmadir_t;
196
197 typedef enum {
198 fasdma_none, /* No dma */
199 fasdma_pio, /* PIO mode */
200 fasdma_pseudo, /* Pseudo DMA */
201 fasdma_real_block, /* Real DMA, on block by block basis */
202 fasdma_real_all /* Real DMA, on request by request */
203 } fasdmatype_t;
204
205 typedef enum {
206 neg_wait, /* Negotiate with device */
207 neg_inprogress, /* Negotiation sent */
208 neg_complete, /* Negotiation complete */
209 neg_targcomplete, /* Target completed negotiation */
210 neg_invalid /* Negotiation not supported */
211 } neg_t;
212
213 #define MAGIC 0x441296bdUL
214 #define NR_MSGS 8
215
216 #define FASCAP_DMA (1 << 0)
217 #define FASCAP_PSEUDODMA (1 << 1)
218
219 typedef struct {
220 unsigned long magic_start;
221 spinlock_t host_lock;
222 struct Scsi_Host *host; /* host */
223 struct scsi_cmnd *SCpnt; /* currently processing command */
224 struct scsi_cmnd *origSCpnt; /* original connecting command */
225 struct scsi_cmnd *reqSCpnt; /* request sense command */
226 struct scsi_cmnd *rstSCpnt; /* reset command */
227 struct scsi_cmnd *pending_SCpnt[8]; /* per-device pending commands */
228 int next_pending; /* next pending device */
229
230 /*
231 * Error recovery
232 */
233 wait_queue_head_t eh_wait;
234 struct timer_list eh_timer;
235 unsigned int rst_dev_status;
236 unsigned int rst_bus_status;
237
238 /* driver information */
239 struct {
240 phase_t phase; /* current phase */
241 void __iomem *io_base; /* iomem base of FAS216 */
242 unsigned int io_shift; /* shift to adjust reg offsets by */
243 unsigned char cfg[4]; /* configuration registers */
244 const char *type; /* chip type */
245 unsigned int irq; /* interrupt */
246 int dma; /* dma channel */
247
248 struct scsi_pointer SCp; /* current commands data pointer */
249
250 MsgQueue_t msgs; /* message queue for connected device */
251
252 unsigned int async_stp; /* Async transfer STP value */
253 unsigned char msgin_fifo; /* bytes in fifo at time of message in */
254 unsigned char message[256]; /* last message received from device */
255
256 unsigned char disconnectable:1; /* this command can be disconnected */
257 unsigned char aborting:1; /* aborting command */
258 } scsi;
259
260 /* statistics information */
261 struct {
262 unsigned int queues;
263 unsigned int removes;
264 unsigned int fins;
265 unsigned int reads;
266 unsigned int writes;
267 unsigned int miscs;
268 unsigned int disconnects;
269 unsigned int aborts;
270 unsigned int bus_resets;
271 unsigned int host_resets;
272 } stats;
273
274 /* configuration information */
275 struct {
276 unsigned char clockrate; /* clock rate of FAS device (MHz) */
277 unsigned char select_timeout; /* timeout (R5) */
278 unsigned char sync_max_depth; /* Synchronous xfer max fifo depth */
279 unsigned char wide_max_size; /* Maximum wide transfer size */
280 unsigned char cntl3; /* Control Reg 3 */
281 unsigned int asyncperiod; /* Async transfer period (ns) */
282 unsigned int capabilities; /* driver capabilities */
283 unsigned int disconnect_ok:1; /* Disconnects allowed? */
284 } ifcfg;
285
286 /* queue handling */
287 struct {
288 Queue_t issue; /* issue queue */
289 Queue_t disconnected; /* disconnected command queue */
290 } queues;
291
292 /* per-device info */
293 struct fas216_device {
294 unsigned char disconnect_ok:1; /* device can disconnect */
295 unsigned char parity_enabled:1; /* parity checking enabled */
296 unsigned char parity_check:1; /* need to check parity checking */
297 unsigned char period; /* sync xfer period in (*4ns) */
298 unsigned char stp; /* synchronous transfer period */
299 unsigned char sof; /* synchronous offset register */
300 unsigned char wide_xfer; /* currently negociated wide transfer */
301 neg_t sync_state; /* synchronous transfer mode */
302 neg_t wide_state; /* wide transfer mode */
303 } device[8];
304 unsigned long busyluns[64/sizeof(unsigned long)];/* array of bits indicating LUNs busy */
305
306 /* dma */
307 struct {
308 fasdmatype_t transfer_type; /* current type of DMA transfer */
309 fasdmatype_t (*setup) (struct Scsi_Host *host, struct scsi_pointer *SCp, fasdmadir_t direction, fasdmatype_t min_dma);
310 void (*pseudo)(struct Scsi_Host *host, struct scsi_pointer *SCp, fasdmadir_t direction, int transfer);
311 void (*stop) (struct Scsi_Host *host, struct scsi_pointer *SCp);
312 } dma;
313
314 /* miscellaneous */
315 int internal_done; /* flag to indicate request done */
316 struct scsi_eh_save ses; /* holds request sense restore info */
317 unsigned long magic_end;
318 } FAS216_Info;
319
320 /* Function: int fas216_init (struct Scsi_Host *instance)
321 * Purpose : initialise FAS/NCR/AMD SCSI structures.
322 * Params : instance - a driver-specific filled-out structure
323 * Returns : 0 on success
324 */
325 extern int fas216_init (struct Scsi_Host *instance);
326
327 /* Function: int fas216_add (struct Scsi_Host *instance, struct device *dev)
328 * Purpose : initialise FAS/NCR/AMD SCSI ic.
329 * Params : instance - a driver-specific filled-out structure
330 * Returns : 0 on success
331 */
332 extern int fas216_add (struct Scsi_Host *instance, struct device *dev);
333
334 /* Function: int fas216_queue_command(struct Scsi_Host *h, struct scsi_cmnd *SCpnt)
335 * Purpose : queue a command for adapter to process.
336 * Params : h - host adapter
337 * : SCpnt - Command to queue
338 * Returns : 0 - success, else error
339 */
340 extern int fas216_queue_command(struct Scsi_Host *h, struct scsi_cmnd *SCpnt);
341
342 /* Function: int fas216_noqueue_command(struct Scsi_Host *h, struct scsi_cmnd *SCpnt)
343 * Purpose : queue a command for adapter to process, and process it to completion.
344 * Params : h - host adapter
345 * : SCpnt - Command to queue
346 * Returns : 0 - success, else error
347 */
348 extern int fas216_noqueue_command(struct Scsi_Host *, struct scsi_cmnd *);
349
350 /* Function: irqreturn_t fas216_intr (FAS216_Info *info)
351 * Purpose : handle interrupts from the interface to progress a command
352 * Params : info - interface to service
353 */
354 extern irqreturn_t fas216_intr (FAS216_Info *info);
355
356 extern void fas216_remove (struct Scsi_Host *instance);
357
358 /* Function: void fas216_release (struct Scsi_Host *instance)
359 * Purpose : release all resources and put everything to bed for FAS/NCR/AMD SCSI ic.
360 * Params : instance - a driver-specific filled-out structure
361 * Returns : 0 on success
362 */
363 extern void fas216_release (struct Scsi_Host *instance);
364
365 extern int fas216_print_host(FAS216_Info *info, char *buffer);
366 extern int fas216_print_stats(FAS216_Info *info, char *buffer);
367 extern int fas216_print_devices(FAS216_Info *info, char *buffer);
368
369 /* Function: int fas216_eh_abort(struct scsi_cmnd *SCpnt)
370 * Purpose : abort this command
371 * Params : SCpnt - command to abort
372 * Returns : FAILED if unable to abort
373 */
374 extern int fas216_eh_abort(struct scsi_cmnd *SCpnt);
375
376 /* Function: int fas216_eh_device_reset(struct scsi_cmnd *SCpnt)
377 * Purpose : Reset the device associated with this command
378 * Params : SCpnt - command specifing device to reset
379 * Returns : FAILED if unable to reset
380 */
381 extern int fas216_eh_device_reset(struct scsi_cmnd *SCpnt);
382
383 /* Function: int fas216_eh_bus_reset(struct scsi_cmnd *SCpnt)
384 * Purpose : Reset the complete bus associated with this command
385 * Params : SCpnt - command specifing bus to reset
386 * Returns : FAILED if unable to reset
387 */
388 extern int fas216_eh_bus_reset(struct scsi_cmnd *SCpnt);
389
390 /* Function: int fas216_eh_host_reset(struct scsi_cmnd *SCpnt)
391 * Purpose : Reset the host associated with this command
392 * Params : SCpnt - command specifing host to reset
393 * Returns : FAILED if unable to reset
394 */
395 extern int fas216_eh_host_reset(struct scsi_cmnd *SCpnt);
396
397 #endif /* FAS216_H */
Linux Btrfs Development