arch/arm/mach-mmp/pxa168.c

   1 /*
   2  *  linux/arch/arm/mach-mmp/pxa168.c
   3  *
   4  *  Code specific to PXA168
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9  */
  10 #include <linux/module.h>
  11 #include <linux/kernel.h>
  12 #include <linux/init.h>
  13 #include <linux/list.h>
  14 #include <linux/io.h>
  15 #include <linux/clk.h>
  16
  17 #include <asm/mach/time.h>
  18 #include <mach/addr-map.h>
  19 #include <mach/cputype.h>
  20 #include <mach/regs-apbc.h>
  21 #include <mach/regs-apmu.h>
  22 #include <mach/irqs.h>
  23 #include <mach/gpio-pxa.h>
  24 #include <mach/dma.h>
  25 #include <mach/devices.h>
  26 #include <mach/mfp.h>
  27 #include <linux/platform_device.h>
  28 #include <linux/dma-mapping.h>
  29 #include <mach/pxa168.h>
  30
  31 #include "common.h"
  32 #include "clock.h"
  33
  34 #define MFPR_VIRT_BASE  (APB_VIRT_BASE + 0x1e000)
  35
  36 static struct mfp_addr_map pxa168_mfp_addr_map[] __initdata =
  37 {
  38         MFP_ADDR_X(GPIO0,   GPIO36,  0x04c),
  39         MFP_ADDR_X(GPIO37,  GPIO55,  0x000),
  40         MFP_ADDR_X(GPIO56,  GPIO123, 0x0e0),
  41         MFP_ADDR_X(GPIO124, GPIO127, 0x0f4),
  42
  43         MFP_ADDR_END,
  44 };
  45
  46 #define APMASK(i)       (GPIO_REGS_VIRT + BANK_OFF(i) + 0x09c)
  47
  48 static void __init pxa168_init_gpio(void)
  49 {
  50         int i;
  51
  52         /* enable GPIO clock */
  53         __raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_PXA168_GPIO);
  54
  55         /* unmask GPIO edge detection for all 4 banks - APMASKx */
  56         for (i = 0; i < 4; i++)
  57                 __raw_writel(0xffffffff, APMASK(i));
  58
  59         pxa_init_gpio(IRQ_PXA168_GPIOX, 0, 127, NULL);
  60 }
  61
  62 void __init pxa168_init_irq(void)
  63 {
  64         icu_init_irq();
  65         pxa168_init_gpio();
  66 }
  67
  68 /* APB peripheral clocks */
  69 static APBC_CLK(uart1, PXA168_UART1, 1, 14745600);
  70 static APBC_CLK(uart2, PXA168_UART2, 1, 14745600);
  71 static APBC_CLK(uart3, PXA168_UART3, 1, 14745600);
  72 static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000);
  73 static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000);
  74 static APBC_CLK(pwm1, PXA168_PWM1, 1, 13000000);
  75 static APBC_CLK(pwm2, PXA168_PWM2, 1, 13000000);
  76 static APBC_CLK(pwm3, PXA168_PWM3, 1, 13000000);
  77 static APBC_CLK(pwm4, PXA168_PWM4, 1, 13000000);
  78 static APBC_CLK(ssp1, PXA168_SSP1, 4, 0);
  79 static APBC_CLK(ssp2, PXA168_SSP2, 4, 0);
  80 static APBC_CLK(ssp3, PXA168_SSP3, 4, 0);
  81 static APBC_CLK(ssp4, PXA168_SSP4, 4, 0);
  82 static APBC_CLK(ssp5, PXA168_SSP5, 4, 0);
  83 static APBC_CLK(keypad, PXA168_KPC, 0, 32000);
  84
  85 static APMU_CLK(nand, NAND, 0x19b, 156000000);
  86 static APMU_CLK(lcd, LCD, 0x7f, 312000000);
  87 static APMU_CLK(eth, ETH, 0x09, 0);
  88 static APMU_CLK(usb, USB, 0x12, 0);
  89
  90 /* device and clock bindings */
  91 static struct clk_lookup pxa168_clkregs[] = {
  92         INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
  93         INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
  94         INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
  95         INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
  96         INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
  97         INIT_CLKREG(&clk_pwm1, "pxa168-pwm.0", NULL),
  98         INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL),
  99         INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL),
 100         INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL),
 101         INIT_CLKREG(&clk_ssp1, "pxa168-ssp.0", NULL),
 102         INIT_CLKREG(&clk_ssp2, "pxa168-ssp.1", NULL),
 103         INIT_CLKREG(&clk_ssp3, "pxa168-ssp.2", NULL),
 104         INIT_CLKREG(&clk_ssp4, "pxa168-ssp.3", NULL),
 105         INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL),
 106         INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
 107         INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL),
 108         INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
 109         INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"),
 110         INIT_CLKREG(&clk_usb, "pxa168-ehci", "PXA168-USBCLK"),
 111 };
 112
 113 static int __init pxa168_init(void)
 114 {
 115         if (cpu_is_pxa168()) {
 116                 mfp_init_base(MFPR_VIRT_BASE);
 117                 mfp_init_addr(pxa168_mfp_addr_map);
 118                 pxa_init_dma(IRQ_PXA168_DMA_INT0, 32);
 119                 clkdev_add_table(ARRAY_AND_SIZE(pxa168_clkregs));
 120         }
 121
 122         return 0;
 123 }
 124 postcore_initcall(pxa168_init);
 125
 126 /* system timer - clock enabled, 3.25MHz */
 127 #define TIMER_CLK_RST   (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
 128
 129 static void __init pxa168_timer_init(void)
 130 {
 131         /* this is early, we have to initialize the CCU registers by
 132          * ourselves instead of using clk_* API. Clock rate is defined
 133          * by APBC_TIMERS_CLK_RST (3.25MHz) and enabled free-running
 134          */
 135         __raw_writel(APBC_APBCLK | APBC_RST, APBC_PXA168_TIMERS);
 136
 137         /* 3.25MHz, bus/functional clock enabled, release reset */
 138         __raw_writel(TIMER_CLK_RST, APBC_PXA168_TIMERS);
 139
 140         timer_init(IRQ_PXA168_TIMER1);
 141 }
 142
 143 struct sys_timer pxa168_timer = {
 144         .init   = pxa168_timer_init,
 145 };
 146
 147 void pxa168_clear_keypad_wakeup(void)
 148 {
 149         uint32_t val;
 150         uint32_t mask = APMU_PXA168_KP_WAKE_CLR;
 151
 152         /* wake event clear is needed in order to clear keypad interrupt */
 153         val = __raw_readl(APMU_WAKE_CLR);
 154         __raw_writel(val |  mask, APMU_WAKE_CLR);
 155 }
 156
 157 /* on-chip devices */
 158 PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22);
 159 PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24);
 160 PXA168_DEVICE(uart3, "pxa2xx-uart", 2, UART3, 0xd4026000, 0x30, 23, 24);
 161 PXA168_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28);
 162 PXA168_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28);
 163 PXA168_DEVICE(pwm1, "pxa168-pwm", 0, NONE, 0xd401a000, 0x10);
 164 PXA168_DEVICE(pwm2, "pxa168-pwm", 1, NONE, 0xd401a400, 0x10);
 165 PXA168_DEVICE(pwm3, "pxa168-pwm", 2, NONE, 0xd401a800, 0x10);
 166 PXA168_DEVICE(pwm4, "pxa168-pwm", 3, NONE, 0xd401ac00, 0x10);
 167 PXA168_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);
 168 PXA168_DEVICE(ssp1, "pxa168-ssp", 0, SSP1, 0xd401b000, 0x40, 52, 53);
 169 PXA168_DEVICE(ssp2, "pxa168-ssp", 1, SSP2, 0xd401c000, 0x40, 54, 55);
 170 PXA168_DEVICE(ssp3, "pxa168-ssp", 2, SSP3, 0xd401f000, 0x40, 56, 57);
 171 PXA168_DEVICE(ssp4, "pxa168-ssp", 3, SSP4, 0xd4020000, 0x40, 58, 59);
 172 PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61);
 173 PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8);
 174 PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c);
 175 PXA168_DEVICE(eth, "pxa168-eth", -1, MFU, 0xc0800000, 0x0fff);
 176
 177 struct resource pxa168_usb_host_resources[] = {
 178         /* USB Host conroller register base */
 179         [0] = {
 180                 .start  = 0xd4209000,
 181                 .end    = 0xd4209000 + 0x200,
 182                 .flags  = IORESOURCE_MEM,
 183                 .name   = "pxa168-usb-host",
 184         },
 185         /* USB PHY register base */
 186         [1] = {
 187                 .start  = 0xd4206000,
 188                 .end    = 0xd4206000 + 0xff,
 189                 .flags  = IORESOURCE_MEM,
 190                 .name   = "pxa168-usb-phy",
 191         },
 192         [2] = {
 193                 .start  = IRQ_PXA168_USB2,
 194                 .end    = IRQ_PXA168_USB2,
 195                 .flags  = IORESOURCE_IRQ,
 196         },
 197 };
 198
 199 static u64 pxa168_usb_host_dmamask = DMA_BIT_MASK(32);
 200 struct platform_device pxa168_device_usb_host = {
 201         .name = "pxa168-ehci",
 202         .id   = -1,
 203         .dev  = {
 204                 .dma_mask = &pxa168_usb_host_dmamask,
 205                 .coherent_dma_mask = DMA_BIT_MASK(32),
 206         },
 207
 208         .num_resources = ARRAY_SIZE(pxa168_usb_host_resources),
 209         .resource      = pxa168_usb_host_resources,
 210 };
 211
 212 int __init pxa168_add_usb_host(struct pxa168_usb_pdata *pdata)
 213 {
 214         pxa168_device_usb_host.dev.platform_data = pdata;
 215         return platform_device_register(&pxa168_device_usb_host);
 216 }