2 * linux/arch/arm/mach-omap2/board-ldp.c
4 * Copyright (C) 2008 Texas Instruments Inc.
5 * Nishant Kamat <nskamat@ti.com>
7 * Modified from mach-omap2/board-3430sdp.c
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
13 #include <linux/gpio.h>
14 #include <linux/kernel.h>
15 #include <linux/init.h>
16 #include <linux/platform_device.h>
17 #include <linux/delay.h>
18 #include <linux/input.h>
19 #include <linux/input/matrix_keypad.h>
20 #include <linux/gpio_keys.h>
21 #include <linux/workqueue.h>
22 #include <linux/err.h>
23 #include <linux/clk.h>
24 #include <linux/spi/spi.h>
25 #include <linux/regulator/machine.h>
26 #include <linux/i2c/twl.h>
28 #include <linux/smsc911x.h>
29 #include <linux/mmc/host.h>
31 #include <mach/hardware.h>
32 #include <asm/mach-types.h>
33 #include <asm/mach/arch.h>
34 #include <asm/mach/map.h>
36 #include <plat/mcspi.h>
37 #include <plat/board.h>
38 #include <plat/common.h>
39 #include <plat/gpmc.h>
40 #include <mach/board-zoom.h>
42 #include <asm/delay.h>
44 #include <plat/gpmc-smsc911x.h>
46 #include "board-flash.h"
50 #include "common-board-devices.h"
52 #define LDP_SMSC911X_CS 1
53 #define LDP_SMSC911X_GPIO 152
54 #define DEBUG_BASE 0x08000000
55 #define LDP_ETHR_START DEBUG_BASE
57 static uint32_t board_keymap
[] = {
73 KEY(4, 4, KEY_VOLUMEUP
),
74 KEY(5, 5, KEY_VOLUMEDOWN
),
78 static struct matrix_keymap_data board_map_data
= {
79 .keymap
= board_keymap
,
80 .keymap_size
= ARRAY_SIZE(board_keymap
),
83 static struct twl4030_keypad_data ldp_kp_twl4030_data
= {
84 .keymap_data
= &board_map_data
,
90 static struct gpio_keys_button ldp_gpio_keys_buttons
[] = {
96 .debounce_interval
= 30,
103 .debounce_interval
= 30,
110 .debounce_interval
= 30,
117 .debounce_interval
= 30,
124 .debounce_interval
= 30,
131 .debounce_interval
= 30,
138 .debounce_interval
= 30,
145 .debounce_interval
= 30,
152 .debounce_interval
= 30,
156 static struct gpio_keys_platform_data ldp_gpio_keys
= {
157 .buttons
= ldp_gpio_keys_buttons
,
158 .nbuttons
= ARRAY_SIZE(ldp_gpio_keys_buttons
),
162 static struct platform_device ldp_gpio_keys_device
= {
166 .platform_data
= &ldp_gpio_keys
,
170 static struct omap_smsc911x_platform_data smsc911x_cfg
= {
171 .cs
= LDP_SMSC911X_CS
,
172 .gpio_irq
= LDP_SMSC911X_GPIO
,
173 .gpio_reset
= -EINVAL
,
174 .flags
= SMSC911X_USE_32BIT
,
177 static inline void __init
ldp_init_smsc911x(void)
179 gpmc_smsc911x_init(&smsc911x_cfg
);
182 static struct platform_device ldp_lcd_device
= {
187 static struct omap_lcd_config ldp_lcd_config __initdata
= {
188 .ctrl_name
= "internal",
191 static struct omap_board_config_kernel ldp_config
[] __initdata
= {
192 { OMAP_TAG_LCD
, &ldp_lcd_config
},
195 static void __init
omap_ldp_init_early(void)
197 omap2_init_common_infrastructure();
198 omap2_init_common_devices(NULL
, NULL
);
201 static struct twl4030_gpio_platform_data ldp_gpio_data
= {
202 .gpio_base
= OMAP_MAX_GPIO_LINES
,
203 .irq_base
= TWL4030_GPIO_IRQ_BASE
,
204 .irq_end
= TWL4030_GPIO_IRQ_END
,
207 static struct regulator_consumer_supply ldp_vmmc1_supply
[] = {
208 REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
211 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
212 static struct regulator_init_data ldp_vmmc1
= {
216 .valid_modes_mask
= REGULATOR_MODE_NORMAL
217 | REGULATOR_MODE_STANDBY
,
218 .valid_ops_mask
= REGULATOR_CHANGE_VOLTAGE
219 | REGULATOR_CHANGE_MODE
220 | REGULATOR_CHANGE_STATUS
,
222 .num_consumer_supplies
= ARRAY_SIZE(ldp_vmmc1_supply
),
223 .consumer_supplies
= ldp_vmmc1_supply
,
227 static struct regulator_consumer_supply ldp_vaux1_supplies
[] = {
228 REGULATOR_SUPPLY("vcc", "spi1.0"),
232 static struct regulator_init_data ldp_vaux1
= {
237 .valid_modes_mask
= REGULATOR_MODE_NORMAL
238 | REGULATOR_MODE_STANDBY
,
239 .valid_ops_mask
= REGULATOR_CHANGE_MODE
240 | REGULATOR_CHANGE_STATUS
,
242 .num_consumer_supplies
= ARRAY_SIZE(ldp_vaux1_supplies
),
243 .consumer_supplies
= ldp_vaux1_supplies
,
246 static struct twl4030_platform_data ldp_twldata
= {
247 /* platform_data for children goes here */
250 .gpio
= &ldp_gpio_data
,
251 .keypad
= &ldp_kp_twl4030_data
,
254 static int __init
omap_i2c_init(void)
256 omap3_pmic_get_config(&ldp_twldata
,
257 TWL_COMMON_PDATA_USB
| TWL_COMMON_PDATA_MADC
, 0);
258 omap3_pmic_init("twl4030", &ldp_twldata
);
259 omap_register_i2c_bus(2, 400, NULL
, 0);
260 omap_register_i2c_bus(3, 400, NULL
, 0);
264 static struct omap2_hsmmc_info mmc
[] __initdata
= {
267 .caps
= MMC_CAP_4_BIT_DATA
,
274 static struct platform_device
*ldp_devices
[] __initdata
= {
276 &ldp_gpio_keys_device
,
279 #ifdef CONFIG_OMAP_MUX
280 static struct omap_board_mux board_mux
[] __initdata
= {
281 { .reg_offset
= OMAP_MUX_TERMINATOR
},
285 static struct mtd_partition ldp_nand_partitions
[] = {
286 /* All the partition sizes are listed in terms of NAND block size */
288 .name
= "X-Loader-NAND",
290 .size
= 4 * (64 * 2048), /* 512KB, 0x80000 */
291 .mask_flags
= MTD_WRITEABLE
, /* force read-only */
294 .name
= "U-Boot-NAND",
295 .offset
= MTDPART_OFS_APPEND
, /* Offset = 0x80000 */
296 .size
= 10 * (64 * 2048), /* 1.25MB, 0x140000 */
297 .mask_flags
= MTD_WRITEABLE
, /* force read-only */
300 .name
= "Boot Env-NAND",
301 .offset
= MTDPART_OFS_APPEND
, /* Offset = 0x1c0000 */
302 .size
= 2 * (64 * 2048), /* 256KB, 0x40000 */
305 .name
= "Kernel-NAND",
306 .offset
= MTDPART_OFS_APPEND
, /* Offset = 0x0200000*/
307 .size
= 240 * (64 * 2048), /* 30M, 0x1E00000 */
310 .name
= "File System - NAND",
311 .offset
= MTDPART_OFS_APPEND
, /* Offset = 0x2000000 */
312 .size
= MTDPART_SIZ_FULL
, /* 96MB, 0x6000000 */
317 static void __init
omap_ldp_init(void)
319 omap3_mux_init(board_mux
, OMAP_PACKAGE_CBB
);
320 omap_board_config
= ldp_config
;
321 omap_board_config_size
= ARRAY_SIZE(ldp_config
);
324 platform_add_devices(ldp_devices
, ARRAY_SIZE(ldp_devices
));
325 omap_ads7846_init(1, 54, 310, NULL
);
328 board_nand_init(ldp_nand_partitions
,
329 ARRAY_SIZE(ldp_nand_partitions
), ZOOM_NAND_CS
, 0);
331 omap2_hsmmc_init(mmc
);
334 MACHINE_START(OMAP_LDP
, "OMAP LDP board")
335 .boot_params
= 0x80000100,
336 .reserve
= omap_reserve
,
337 .map_io
= omap3_map_io
,
338 .init_early
= omap_ldp_init_early
,
339 .init_irq
= omap3_init_irq
,
340 .init_machine
= omap_ldp_init
,
341 .timer
= &omap3_timer
,