arch/m68k/platform/5307/nettel.c

   1 /***************************************************************************/
   2
   3 /*
   4  *      nettel.c -- startup code support for the NETtel boards
   5  *
   6  *      Copyright (C) 2009, Greg Ungerer (gerg@snapgear.com)
   7  */
   8
   9 /***************************************************************************/
  10
  11 #include <linux/kernel.h>
  12 #include <linux/param.h>
  13 #include <linux/init.h>
  14 #include <linux/io.h>
  15 #include <linux/platform_device.h>
  16 #include <asm/coldfire.h>
  17 #include <asm/mcfsim.h>
  18 #include <asm/nettel.h>
  19
  20 /***************************************************************************/
  21
  22 /*
  23  * Define the IO and interrupt resources of the 2 SMC9196 interfaces.
  24  */
  25 #define NETTEL_SMC0_ADDR        0x30600300
  26 #define NETTEL_SMC0_IRQ         29
  27
  28 #define NETTEL_SMC1_ADDR        0x30600000
  29 #define NETTEL_SMC1_IRQ         27
  30
  31 /*
  32  * We need some access into the SMC9196 registers. Define those registers
  33  * we will need here (including the smc91x.h doesn't seem to give us these
  34  * in a simple form).
  35  */
  36 #define SMC91xx_BANKSELECT      14
  37 #define SMC91xx_BASEADDR        2
  38 #define SMC91xx_BASEMAC         4
  39
  40 /***************************************************************************/
  41
  42 static struct resource nettel_smc91x_0_resources[] = {
  43         {
  44                 .start          = NETTEL_SMC0_ADDR,
  45                 .end            = NETTEL_SMC0_ADDR + 0x20,
  46                 .flags          = IORESOURCE_MEM,
  47         },
  48         {
  49                 .start          = NETTEL_SMC0_IRQ,
  50                 .end            = NETTEL_SMC0_IRQ,
  51                 .flags          = IORESOURCE_IRQ,
  52         },
  53 };
  54
  55 static struct resource nettel_smc91x_1_resources[] = {
  56         {
  57                 .start          = NETTEL_SMC1_ADDR,
  58                 .end            = NETTEL_SMC1_ADDR + 0x20,
  59                 .flags          = IORESOURCE_MEM,
  60         },
  61         {
  62                 .start          = NETTEL_SMC1_IRQ,
  63                 .end            = NETTEL_SMC1_IRQ,
  64                 .flags          = IORESOURCE_IRQ,
  65         },
  66 };
  67
  68 static struct platform_device nettel_smc91x[] = {
  69         {
  70                 .name                   = "smc91x",
  71                 .id                     = 0,
  72                 .num_resources          = ARRAY_SIZE(nettel_smc91x_0_resources),
  73                 .resource               = nettel_smc91x_0_resources,
  74         },
  75         {
  76                 .name                   = "smc91x",
  77                 .id                     = 1,
  78                 .num_resources          = ARRAY_SIZE(nettel_smc91x_1_resources),
  79                 .resource               = nettel_smc91x_1_resources,
  80         },
  81 };
  82
  83 static struct platform_device *nettel_devices[] __initdata = {
  84         &nettel_smc91x[0],
  85         &nettel_smc91x[1],
  86 };
  87
  88 /***************************************************************************/
  89
  90 static u8 nettel_macdefault[] __initdata = {
  91         0x00, 0xd0, 0xcf, 0x00, 0x00, 0x01,
  92 };
  93
  94 /*
  95  * Set flash contained MAC address into SMC9196 core. Make sure the flash
  96  * MAC address is sane, and not an empty flash. If no good use the Moreton
  97  * Bay default MAC address instead.
  98  */
  99
 100 static void __init nettel_smc91x_setmac(unsigned int ioaddr, unsigned int flashaddr)
 101 {
 102         u16 *macp;
 103
 104         macp = (u16 *) flashaddr;
 105         if ((macp[0] == 0xffff) && (macp[1] == 0xffff) && (macp[2] == 0xffff))
 106                 macp = (u16 *) &nettel_macdefault[0];
 107
 108         writew(1, NETTEL_SMC0_ADDR + SMC91xx_BANKSELECT);
 109         writew(macp[0], ioaddr + SMC91xx_BASEMAC);
 110         writew(macp[1], ioaddr + SMC91xx_BASEMAC + 2);
 111         writew(macp[2], ioaddr + SMC91xx_BASEMAC + 4);
 112 }
 113
 114 /***************************************************************************/
 115
 116 /*
 117  * Re-map the address space of at least one of the SMC ethernet
 118  * parts. Both parts power up decoding the same address, so we
 119  * need to move one of them first, before doing anything else.
 120  */
 121
 122 static void __init nettel_smc91x_init(void)
 123 {
 124         writew(0x00ec, MCF_MBAR + MCFSIM_PADDR);
 125         mcf_setppdata(0, 0x0080);
 126         writew(1, NETTEL_SMC0_ADDR + SMC91xx_BANKSELECT);
 127         writew(0x0067, NETTEL_SMC0_ADDR + SMC91xx_BASEADDR);
 128         mcf_setppdata(0x0080, 0);
 129
 130         /* Set correct chip select timing for SMC9196 accesses */
 131         writew(0x1180, MCF_MBAR + MCFSIM_CSCR3);
 132
 133         /* Set the SMC interrupts to be auto-vectored */
 134         mcf_autovector(NETTEL_SMC0_IRQ);
 135         mcf_autovector(NETTEL_SMC1_IRQ);
 136
 137         /* Set MAC addresses from flash for both interfaces */
 138         nettel_smc91x_setmac(NETTEL_SMC0_ADDR, 0xf0006000);
 139         nettel_smc91x_setmac(NETTEL_SMC1_ADDR, 0xf0006006);
 140 }
 141
 142 /***************************************************************************/
 143
 144 static int __init init_nettel(void)
 145 {
 146         nettel_smc91x_init();
 147         platform_add_devices(nettel_devices, ARRAY_SIZE(nettel_devices));
 148         return 0;
 149 }
 150
 151 arch_initcall(init_nettel);
 152
 153 /***************************************************************************/