arch/m68k/platform/68360/commproc.c

   1 /*
   2  * General Purpose functions for the global management of the
   3  * Communication Processor Module.
   4  *
   5  * Copyright (c) 2000 Michael Leslie <mleslie@lineo.com>
   6  * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
   7  *
   8  * In addition to the individual control of the communication
   9  * channels, there are a few functions that globally affect the
  10  * communication processor.
  11  *
  12  * Buffer descriptors must be allocated from the dual ported memory
  13  * space.  The allocator for that is here.  When the communication
  14  * process is reset, we reclaim the memory available.  There is
  15  * currently no deallocator for this memory.
  16  * The amount of space available is platform dependent.  On the
  17  * MBX, the EPPC software loads additional microcode into the
  18  * communication processor, and uses some of the DP ram for this
  19  * purpose.  Current, the first 512 bytes and the last 256 bytes of
  20  * memory are used.  Right now I am conservative and only use the
  21  * memory that can never be used for microcode.  If there are
  22  * applications that require more DP ram, we can expand the boundaries
  23  * but then we have to be careful of any downloaded microcode.
  24  *
  25  */
  26
  27 /*
  28  * Michael Leslie <mleslie@lineo.com>
  29  * adapted Dan Malek's ppc8xx drivers to M68360
  30  *
  31  */
  32
  33 #include <linux/errno.h>
  34 #include <linux/sched.h>
  35 #include <linux/kernel.h>
  36 #include <linux/param.h>
  37 #include <linux/string.h>
  38 #include <linux/mm.h>
  39 #include <linux/interrupt.h>
  40 #include <asm/irq.h>
  41 #include <asm/m68360.h>
  42 #include <asm/commproc.h>
  43
  44 /* #include <asm/page.h> */
  45 /* #include <asm/pgtable.h> */
  46 extern void *_quicc_base;
  47 extern unsigned int system_clock;
  48
  49
  50 static uint dp_alloc_base;      /* Starting offset in DP ram */
  51 static uint dp_alloc_top;       /* Max offset + 1 */
  52
  53 #if 0
  54 static  void    *host_buffer;   /* One page of host buffer */
  55 static  void    *host_end;          /* end + 1 */
  56 #endif
  57
  58 /* struct  cpm360_t *cpmp; */         /* Pointer to comm processor space */
  59
  60 QUICC  *pquicc;
  61 /* QUICC  *quicc_dpram; */ /* mleslie - temporary; use extern pquicc elsewhere instead */
  62
  63
  64 /* CPM interrupt vector functions. */
  65 struct  cpm_action {
  66         void    (*handler)(void *);
  67         void    *dev_id;
  68 };
  69 static  struct  cpm_action cpm_vecs[CPMVEC_NR];
  70 static  void    cpm_interrupt(int irq, void * dev, struct pt_regs * regs);
  71 static  void    cpm_error_interrupt(void *);
  72
  73 /* prototypes: */
  74 void cpm_install_handler(int vec, void (*handler)(), void *dev_id);
  75 void m360_cpm_reset(void);
  76
  77
  78
  79
  80 void m360_cpm_reset()
  81 {
  82 /*      pte_t              *pte; */
  83
  84         pquicc = (struct quicc *)(_quicc_base); /* initialized in crt0_rXm.S */
  85
  86         /* Perform a CPM reset. */
  87         pquicc->cp_cr = (SOFTWARE_RESET | CMD_FLAG);
  88
  89         /* Wait for CPM to become ready (should be 2 clocks). */
  90         while (pquicc->cp_cr & CMD_FLAG);
  91
  92         /* On the recommendation of the 68360 manual, p. 7-60
  93          * - Set sdma interrupt service mask to 7
  94          * - Set sdma arbitration ID to 4
  95          */
  96         pquicc->sdma_sdcr = 0x0740;
  97
  98
  99         /* Claim the DP memory for our use.
 100          */
 101         dp_alloc_base = CPM_DATAONLY_BASE;
 102         dp_alloc_top = dp_alloc_base + CPM_DATAONLY_SIZE;
 103
 104
 105         /* Set the host page for allocation.
 106          */
 107         /*      host_buffer = host_page_addr; */
 108         /*      host_end = host_page_addr + PAGE_SIZE; */
 109
 110         /*      pte = find_pte(&init_mm, host_page_addr); */
 111         /*      pte_val(*pte) |= _PAGE_NO_CACHE; */
 112         /*      flush_tlb_page(current->mm->mmap, host_buffer); */
 113
 114         /* Tell everyone where the comm processor resides.
 115         */
 116 /*      cpmp = (cpm360_t *)commproc; */
 117 }
 118
 119
 120 /* This is called during init_IRQ.  We used to do it above, but this
 121  * was too early since init_IRQ was not yet called.
 122  */
 123 void
 124 cpm_interrupt_init(void)
 125 {
 126         /* Initialize the CPM interrupt controller.
 127          * NOTE THAT pquicc had better have been initialized!
 128          * reference: MC68360UM p. 7-377
 129          */
 130         pquicc->intr_cicr =
 131                 (CICR_SCD_SCC4 | CICR_SCC_SCC3 | CICR_SCB_SCC2 | CICR_SCA_SCC1) |
 132                 (CPM_INTERRUPT << 13) |
 133                 CICR_HP_MASK |
 134                 (CPM_VECTOR_BASE << 5) |
 135                 CICR_SPS;
 136
 137         /* mask all CPM interrupts from reaching the cpu32 core: */
 138         pquicc->intr_cimr = 0;
 139
 140
 141         /* mles - If I understand correctly, the 360 just pops over to the CPM
 142          * specific vector, obviating the necessity to vector through the IRQ
 143          * whose priority the CPM is set to. This needs a closer look, though.
 144          */
 145
 146         /* Set our interrupt handler with the core CPU. */
 147 /*      if (request_irq(CPM_INTERRUPT, cpm_interrupt, 0, "cpm", NULL) != 0) */
 148 /*              panic("Could not allocate CPM IRQ!"); */
 149
 150         /* Install our own error handler.
 151          */
 152         /* I think we want to hold off on this one for the moment - mles */
 153         /* cpm_install_handler(CPMVEC_ERROR, cpm_error_interrupt, NULL); */
 154
 155         /* master CPM interrupt enable */
 156         /* pquicc->intr_cicr |= CICR_IEN; */ /* no such animal for 360 */
 157 }
 158
 159
 160
 161 /* CPM interrupt controller interrupt.
 162 */
 163 static  void
 164 cpm_interrupt(int irq, void * dev, struct pt_regs * regs)
 165 {
 166         /* uint vec; */
 167
 168         /* mles: Note that this stuff is currently being performed by
 169          * M68360_do_irq(int vec, struct pt_regs *fp), in ../ints.c  */
 170
 171         /* figure out the vector */
 172         /* call that vector's handler */
 173         /* clear the irq's bit in the service register */
 174
 175 #if 0 /* old 860 stuff: */
 176         /* Get the vector by setting the ACK bit and then reading
 177          * the register.
 178          */
 179         ((volatile immap_t *)IMAP_ADDR)->im_cpic.cpic_civr = 1;
 180         vec = ((volatile immap_t *)IMAP_ADDR)->im_cpic.cpic_civr;
 181         vec >>= 11;
 182
 183
 184         if (cpm_vecs[vec].handler != 0)
 185                 (*cpm_vecs[vec].handler)(cpm_vecs[vec].dev_id);
 186         else
 187                 ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr &= ~(1 << vec);
 188
 189         /* After servicing the interrupt, we have to remove the status
 190          * indicator.
 191          */
 192         ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cisr |= (1 << vec);
 193 #endif
 194
 195 }
 196
 197 /* The CPM can generate the error interrupt when there is a race condition
 198  * between generating and masking interrupts.  All we have to do is ACK it
 199  * and return.  This is a no-op function so we don't need any special
 200  * tests in the interrupt handler.
 201  */
 202 static  void
 203 cpm_error_interrupt(void *dev)
 204 {
 205 }
 206
 207 /* Install a CPM interrupt handler.
 208 */
 209 void
 210 cpm_install_handler(int vec, void (*handler)(), void *dev_id)
 211 {
 212
 213         request_irq(vec, handler, 0, "timer", dev_id);
 214
 215 /*      if (cpm_vecs[vec].handler != 0) */
 216 /*              printk(KERN_INFO "CPM interrupt %x replacing %x\n", */
 217 /*                      (uint)handler, (uint)cpm_vecs[vec].handler); */
 218 /*      cpm_vecs[vec].handler = handler; */
 219 /*      cpm_vecs[vec].dev_id = dev_id; */
 220
 221         /*              ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr |= (1 << vec); */
 222 /*      pquicc->intr_cimr |= (1 << vec); */
 223
 224 }
 225
 226 /* Free a CPM interrupt handler.
 227 */
 228 void
 229 cpm_free_handler(int vec)
 230 {
 231         cpm_vecs[vec].handler = NULL;
 232         cpm_vecs[vec].dev_id = NULL;
 233         /* ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr &= ~(1 << vec); */
 234         pquicc->intr_cimr &= ~(1 << vec);
 235 }
 236
 237
 238
 239
 240 /* Allocate some memory from the dual ported ram.  We may want to
 241  * enforce alignment restrictions, but right now everyone is a good
 242  * citizen.
 243  */
 244 uint
 245 m360_cpm_dpalloc(uint size)
 246 {
 247         uint    retloc;
 248
 249         if ((dp_alloc_base + size) >= dp_alloc_top)
 250                 return(CPM_DP_NOSPACE);
 251
 252         retloc = dp_alloc_base;
 253         dp_alloc_base += size;
 254
 255         return(retloc);
 256 }
 257
 258
 259 #if 0 /* mleslie - for now these are simply kmalloc'd */
 260 /* We also own one page of host buffer space for the allocation of
 261  * UART "fifos" and the like.
 262  */
 263 uint
 264 m360_cpm_hostalloc(uint size)
 265 {
 266         uint    retloc;
 267
 268         if ((host_buffer + size) >= host_end)
 269                 return(0);
 270
 271         retloc = host_buffer;
 272         host_buffer += size;
 273
 274         return(retloc);
 275 }
 276 #endif
 277
 278
 279 /* Set a baud rate generator.  This needs lots of work.  There are
 280  * four BRGs, any of which can be wired to any channel.
 281  * The internal baud rate clock is the system clock divided by 16.
 282  * This assumes the baudrate is 16x oversampled by the uart.
 283  */
 284 /* #define BRG_INT_CLK  (((bd_t *)__res)->bi_intfreq * 1000000) */
 285 #define BRG_INT_CLK             system_clock
 286 #define BRG_UART_CLK    (BRG_INT_CLK/16)
 287
 288 void
 289 m360_cpm_setbrg(uint brg, uint rate)
 290 {
 291         volatile uint   *bp;
 292
 293         /* This is good enough to get SMCs running.....
 294          */
 295         /* bp = (uint *)&cpmp->cp_brgc1; */
 296         bp = (volatile uint *)(&pquicc->brgc[0].l);
 297         bp += brg;
 298         *bp = ((BRG_UART_CLK / rate - 1) << 1) | CPM_BRG_EN;
 299 }
 300
 301
 302 /*
 303  * Local variables:
 304  *  c-indent-level: 4
 305  *  c-basic-offset: 4
 306  *  tab-width: 4
 307  * End:
 308  */