arch/mips/sibyte/bcm1480/smp.c

   1 /*
   2  * Copyright (C) 2001,2002,2004 Broadcom Corporation
   3  *
   4  * This program is free software; you can redistribute it and/or
   5  * modify it under the terms of the GNU General Public License
   6  * as published by the Free Software Foundation; either version 2
   7  * of the License, or (at your option) any later version.
   8  *
   9  * This program is distributed in the hope that it will be useful,
  10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12  * GNU General Public License for more details.
  13  *
  14  * You should have received a copy of the GNU General Public License
  15  * along with this program; if not, write to the Free Software
  16  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  17  */
  18
  19 #include <linux/init.h>
  20 #include <linux/delay.h>
  21 #include <linux/smp.h>
  22 #include <linux/kernel_stat.h>
  23 #include <linux/sched.h>
  24
  25 #include <asm/mmu_context.h>
  26 #include <asm/io.h>
  27 #include <asm/fw/cfe/cfe_api.h>
  28 #include <asm/sibyte/sb1250.h>
  29 #include <asm/sibyte/bcm1480_regs.h>
  30 #include <asm/sibyte/bcm1480_int.h>
  31
  32 extern void smp_call_function_interrupt(void);
  33
  34 /*
  35  * These are routines for dealing with the bcm1480 smp capabilities
  36  * independent of board/firmware
  37  */
  38
  39 static void *mailbox_0_set_regs[] = {
  40         IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
  41         IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
  42         IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
  43         IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
  44 };
  45
  46 static void *mailbox_0_clear_regs[] = {
  47         IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
  48         IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
  49         IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
  50         IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
  51 };
  52
  53 static void *mailbox_0_regs[] = {
  54         IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
  55         IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
  56         IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
  57         IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
  58 };
  59
  60 /*
  61  * SMP init and finish on secondary CPUs
  62  */
  63 void __cpuinit bcm1480_smp_init(void)
  64 {
  65         unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 |
  66                 STATUSF_IP1 | STATUSF_IP0;
  67
  68         /* Set interrupt mask, but don't enable */
  69         change_c0_status(ST0_IM, imask);
  70 }
  71
  72 /*
  73  * These are routines for dealing with the sb1250 smp capabilities
  74  * independent of board/firmware
  75  */
  76
  77 /*
  78  * Simple enough; everything is set up, so just poke the appropriate mailbox
  79  * register, and we should be set
  80  */
  81 static void bcm1480_send_ipi_single(int cpu, unsigned int action)
  82 {
  83         __raw_writeq((((u64)action)<< 48), mailbox_0_set_regs[cpu]);
  84 }
  85
  86 static void bcm1480_send_ipi_mask(const struct cpumask *mask,
  87                                   unsigned int action)
  88 {
  89         unsigned int i;
  90
  91         for_each_cpu(i, mask)
  92                 bcm1480_send_ipi_single(i, action);
  93 }
  94
  95 /*
  96  * Code to run on secondary just after probing the CPU
  97  */
  98 static void __cpuinit bcm1480_init_secondary(void)
  99 {
 100         extern void bcm1480_smp_init(void);
 101
 102         bcm1480_smp_init();
 103 }
 104
 105 /*
 106  * Do any tidying up before marking online and running the idle
 107  * loop
 108  */
 109 static void __cpuinit bcm1480_smp_finish(void)
 110 {
 111         extern void sb1480_clockevent_init(void);
 112
 113         sb1480_clockevent_init();
 114         local_irq_enable();
 115 }
 116
 117 /*
 118  * Final cleanup after all secondaries booted
 119  */
 120 static void bcm1480_cpus_done(void)
 121 {
 122 }
 123
 124 /*
 125  * Setup the PC, SP, and GP of a secondary processor and start it
 126  * running!
 127  */
 128 static void __cpuinit bcm1480_boot_secondary(int cpu, struct task_struct *idle)
 129 {
 130         int retval;
 131
 132         retval = cfe_cpu_start(cpu_logical_map(cpu), &smp_bootstrap,
 133                                __KSTK_TOS(idle),
 134                                (unsigned long)task_thread_info(idle), 0);
 135         if (retval != 0)
 136                 printk("cfe_start_cpu(%i) returned %i\n" , cpu, retval);
 137 }
 138
 139 /*
 140  * Use CFE to find out how many CPUs are available, setting up
 141  * cpu_possible_map and the logical/physical mappings.
 142  * XXXKW will the boot CPU ever not be physical 0?
 143  *
 144  * Common setup before any secondaries are started
 145  */
 146 static void __init bcm1480_smp_setup(void)
 147 {
 148         int i, num;
 149
 150         cpus_clear(cpu_possible_map);
 151         cpu_set(0, cpu_possible_map);
 152         __cpu_number_map[0] = 0;
 153         __cpu_logical_map[0] = 0;
 154
 155         for (i = 1, num = 0; i < NR_CPUS; i++) {
 156                 if (cfe_cpu_stop(i) == 0) {
 157                         cpu_set(i, cpu_possible_map);
 158                         __cpu_number_map[i] = ++num;
 159                         __cpu_logical_map[num] = i;
 160                 }
 161         }
 162         printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num);
 163 }
 164
 165 static void __init bcm1480_prepare_cpus(unsigned int max_cpus)
 166 {
 167 }
 168
 169 struct plat_smp_ops bcm1480_smp_ops = {
 170         .send_ipi_single        = bcm1480_send_ipi_single,
 171         .send_ipi_mask          = bcm1480_send_ipi_mask,
 172         .init_secondary         = bcm1480_init_secondary,
 173         .smp_finish             = bcm1480_smp_finish,
 174         .cpus_done              = bcm1480_cpus_done,
 175         .boot_secondary         = bcm1480_boot_secondary,
 176         .smp_setup              = bcm1480_smp_setup,
 177         .prepare_cpus           = bcm1480_prepare_cpus,
 178 };
 179
 180 void bcm1480_mailbox_interrupt(void)
 181 {
 182         int cpu = smp_processor_id();
 183         int irq = K_BCM1480_INT_MBOX_0_0;
 184         unsigned int action;
 185
 186         kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq));
 187         /* Load the mailbox register to figure out what we're supposed to do */
 188         action = (__raw_readq(mailbox_0_regs[cpu]) >> 48) & 0xffff;
 189
 190         /* Clear the mailbox to clear the interrupt */
 191         __raw_writeq(((u64)action)<<48, mailbox_0_clear_regs[cpu]);
 192
 193         if (action & SMP_RESCHEDULE_YOURSELF)
 194                 scheduler_ipi();
 195
 196         if (action & SMP_CALL_FUNCTION)
 197                 smp_call_function_interrupt();
 198 }