arch/x86/include/asm/user_32.h

   1 #ifndef _ASM_X86_USER_32_H
   2 #define _ASM_X86_USER_32_H
   3
   4 #include <asm/page.h>
   5 /* Core file format: The core file is written in such a way that gdb
   6    can understand it and provide useful information to the user (under
   7    linux we use the 'trad-core' bfd).  There are quite a number of
   8    obstacles to being able to view the contents of the floating point
   9    registers, and until these are solved you will not be able to view the
  10    contents of them.  Actually, you can read in the core file and look at
  11    the contents of the user struct to find out what the floating point
  12    registers contain.
  13    The actual file contents are as follows:
  14    UPAGE: 1 page consisting of a user struct that tells gdb what is present
  15    in the file.  Directly after this is a copy of the task_struct, which
  16    is currently not used by gdb, but it may come in useful at some point.
  17    All of the registers are stored as part of the upage.  The upage should
  18    always be only one page.
  19    DATA: The data area is stored.  We use current->end_text to
  20    current->brk to pick up all of the user variables, plus any memory
  21    that may have been malloced.  No attempt is made to determine if a page
  22    is demand-zero or if a page is totally unused, we just cover the entire
  23    range.  All of the addresses are rounded in such a way that an integral
  24    number of pages is written.
  25    STACK: We need the stack information in order to get a meaningful
  26    backtrace.  We need to write the data from (esp) to
  27    current->start_stack, so we round each of these off in order to be able
  28    to write an integer number of pages.
  29    The minimum core file size is 3 pages, or 12288 bytes.
  30 */
  31
  32 /*
  33  * Pentium III FXSR, SSE support
  34  *      Gareth Hughes <gareth@valinux.com>, May 2000
  35  *
  36  * Provide support for the GDB 5.0+ PTRACE_{GET|SET}FPXREGS requests for
  37  * interacting with the FXSR-format floating point environment.  Floating
  38  * point data can be accessed in the regular format in the usual manner,
  39  * and both the standard and SIMD floating point data can be accessed via
  40  * the new ptrace requests.  In either case, changes to the FPU environment
  41  * will be reflected in the task's state as expected.
  42  */
  43
  44 struct user_i387_struct {
  45         long    cwd;
  46         long    swd;
  47         long    twd;
  48         long    fip;
  49         long    fcs;
  50         long    foo;
  51         long    fos;
  52         long    st_space[20];   /* 8*10 bytes for each FP-reg = 80 bytes */
  53 };
  54
  55 struct user_fxsr_struct {
  56         unsigned short  cwd;
  57         unsigned short  swd;
  58         unsigned short  twd;
  59         unsigned short  fop;
  60         long    fip;
  61         long    fcs;
  62         long    foo;
  63         long    fos;
  64         long    mxcsr;
  65         long    reserved;
  66         long    st_space[32];   /* 8*16 bytes for each FP-reg = 128 bytes */
  67         long    xmm_space[32];  /* 8*16 bytes for each XMM-reg = 128 bytes */
  68         long    padding[56];
  69 };
  70
  71 /*
  72  * This is the old layout of "struct pt_regs", and
  73  * is still the layout used by user mode (the new
  74  * pt_regs doesn't have all registers as the kernel
  75  * doesn't use the extra segment registers)
  76  */
  77 struct user_regs_struct {
  78         unsigned long   bx;
  79         unsigned long   cx;
  80         unsigned long   dx;
  81         unsigned long   si;
  82         unsigned long   di;
  83         unsigned long   bp;
  84         unsigned long   ax;
  85         unsigned long   ds;
  86         unsigned long   es;
  87         unsigned long   fs;
  88         unsigned long   gs;
  89         unsigned long   orig_ax;
  90         unsigned long   ip;
  91         unsigned long   cs;
  92         unsigned long   flags;
  93         unsigned long   sp;
  94         unsigned long   ss;
  95 };
  96
  97 /* When the kernel dumps core, it starts by dumping the user struct -
  98    this will be used by gdb to figure out where the data and stack segments
  99    are within the file, and what virtual addresses to use. */
 100 struct user{
 101 /* We start with the registers, to mimic the way that "memory" is returned
 102    from the ptrace(3,...) function.  */
 103   struct user_regs_struct regs; /* Where the registers are actually stored */
 104 /* ptrace does not yet supply these.  Someday.... */
 105   int u_fpvalid;                /* True if math co-processor being used. */
 106                                 /* for this mess. Not yet used. */
 107   struct user_i387_struct i387; /* Math Co-processor registers. */
 108 /* The rest of this junk is to help gdb figure out what goes where */
 109   unsigned long int u_tsize;    /* Text segment size (pages). */
 110   unsigned long int u_dsize;    /* Data segment size (pages). */
 111   unsigned long int u_ssize;    /* Stack segment size (pages). */
 112   unsigned long start_code;     /* Starting virtual address of text. */
 113   unsigned long start_stack;    /* Starting virtual address of stack area.
 114                                    This is actually the bottom of the stack,
 115                                    the top of the stack is always found in the
 116                                    esp register.  */
 117   long int signal;              /* Signal that caused the core dump. */
 118   int reserved;                 /* No longer used */
 119   unsigned long u_ar0;          /* Used by gdb to help find the values for */
 120                                 /* the registers. */
 121   struct user_i387_struct *u_fpstate;   /* Math Co-processor pointer. */
 122   unsigned long magic;          /* To uniquely identify a core file */
 123   char u_comm[32];              /* User command that was responsible */
 124   int u_debugreg[8];
 125 };
 126 #define NBPG PAGE_SIZE
 127 #define UPAGES 1
 128 #define HOST_TEXT_START_ADDR (u.start_code)
 129 #define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
 130
 131 #endif /* _ASM_X86_USER_32_H */