Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
[linux-btrfs-devel.git] / drivers / ide / palm_bk3710.c
blob712c7904d03e5d460854cc565bf139bf29f3290e
1 /*
2 * Palmchip bk3710 IDE controller
4 * Copyright (C) 2006 Texas Instruments.
5 * Copyright (C) 2007 MontaVista Software, Inc., <source@mvista.com>
7 * ----------------------------------------------------------------------------
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22 * ----------------------------------------------------------------------------
26 #include <linux/types.h>
27 #include <linux/module.h>
28 #include <linux/kernel.h>
29 #include <linux/ioport.h>
30 #include <linux/ide.h>
31 #include <linux/delay.h>
32 #include <linux/init.h>
33 #include <linux/clk.h>
34 #include <linux/platform_device.h>
36 /* Offset of the primary interface registers */
37 #define IDE_PALM_ATA_PRI_REG_OFFSET 0x1F0
39 /* Primary Control Offset */
40 #define IDE_PALM_ATA_PRI_CTL_OFFSET 0x3F6
42 #define BK3710_BMICP 0x00
43 #define BK3710_BMISP 0x02
44 #define BK3710_BMIDTP 0x04
45 #define BK3710_IDETIMP 0x40
46 #define BK3710_IDESTATUS 0x47
47 #define BK3710_UDMACTL 0x48
48 #define BK3710_MISCCTL 0x50
49 #define BK3710_REGSTB 0x54
50 #define BK3710_REGRCVR 0x58
51 #define BK3710_DATSTB 0x5C
52 #define BK3710_DATRCVR 0x60
53 #define BK3710_DMASTB 0x64
54 #define BK3710_DMARCVR 0x68
55 #define BK3710_UDMASTB 0x6C
56 #define BK3710_UDMATRP 0x70
57 #define BK3710_UDMAENV 0x74
58 #define BK3710_IORDYTMP 0x78
60 static unsigned ideclk_period; /* in nanoseconds */
62 struct palm_bk3710_udmatiming {
63 unsigned int rptime; /* tRP -- Ready to pause time (nsec) */
64 unsigned int cycletime; /* tCYCTYP2/2 -- avg Cycle Time (nsec) */
65 /* tENV is always a minimum of 20 nsec */
68 static const struct palm_bk3710_udmatiming palm_bk3710_udmatimings[6] = {
69 { 160, 240 / 2 }, /* UDMA Mode 0 */
70 { 125, 160 / 2 }, /* UDMA Mode 1 */
71 { 100, 120 / 2 }, /* UDMA Mode 2 */
72 { 100, 90 / 2 }, /* UDMA Mode 3 */
73 { 100, 60 / 2 }, /* UDMA Mode 4 */
74 { 85, 40 / 2 }, /* UDMA Mode 5 */
77 static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev,
78 unsigned int mode)
80 u8 tenv, trp, t0;
81 u32 val32;
82 u16 val16;
84 /* DMA Data Setup */
85 t0 = DIV_ROUND_UP(palm_bk3710_udmatimings[mode].cycletime,
86 ideclk_period) - 1;
87 tenv = DIV_ROUND_UP(20, ideclk_period) - 1;
88 trp = DIV_ROUND_UP(palm_bk3710_udmatimings[mode].rptime,
89 ideclk_period) - 1;
91 /* udmastb Ultra DMA Access Strobe Width */
92 val32 = readl(base + BK3710_UDMASTB) & (0xFF << (dev ? 0 : 8));
93 val32 |= (t0 << (dev ? 8 : 0));
94 writel(val32, base + BK3710_UDMASTB);
96 /* udmatrp Ultra DMA Ready to Pause Time */
97 val32 = readl(base + BK3710_UDMATRP) & (0xFF << (dev ? 0 : 8));
98 val32 |= (trp << (dev ? 8 : 0));
99 writel(val32, base + BK3710_UDMATRP);
101 /* udmaenv Ultra DMA envelop Time */
102 val32 = readl(base + BK3710_UDMAENV) & (0xFF << (dev ? 0 : 8));
103 val32 |= (tenv << (dev ? 8 : 0));
104 writel(val32, base + BK3710_UDMAENV);
106 /* Enable UDMA for Device */
107 val16 = readw(base + BK3710_UDMACTL) | (1 << dev);
108 writew(val16, base + BK3710_UDMACTL);
111 static void palm_bk3710_setdmamode(void __iomem *base, unsigned int dev,
112 unsigned short min_cycle,
113 unsigned int mode)
115 u8 td, tkw, t0;
116 u32 val32;
117 u16 val16;
118 struct ide_timing *t;
119 int cycletime;
121 t = ide_timing_find_mode(mode);
122 cycletime = max_t(int, t->cycle, min_cycle);
124 /* DMA Data Setup */
125 t0 = DIV_ROUND_UP(cycletime, ideclk_period);
126 td = DIV_ROUND_UP(t->active, ideclk_period);
127 tkw = t0 - td - 1;
128 td -= 1;
130 val32 = readl(base + BK3710_DMASTB) & (0xFF << (dev ? 0 : 8));
131 val32 |= (td << (dev ? 8 : 0));
132 writel(val32, base + BK3710_DMASTB);
134 val32 = readl(base + BK3710_DMARCVR) & (0xFF << (dev ? 0 : 8));
135 val32 |= (tkw << (dev ? 8 : 0));
136 writel(val32, base + BK3710_DMARCVR);
138 /* Disable UDMA for Device */
139 val16 = readw(base + BK3710_UDMACTL) & ~(1 << dev);
140 writew(val16, base + BK3710_UDMACTL);
143 static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate,
144 unsigned int dev, unsigned int cycletime,
145 unsigned int mode)
147 u8 t2, t2i, t0;
148 u32 val32;
149 struct ide_timing *t;
151 t = ide_timing_find_mode(XFER_PIO_0 + mode);
153 /* PIO Data Setup */
154 t0 = DIV_ROUND_UP(cycletime, ideclk_period);
155 t2 = DIV_ROUND_UP(t->active, ideclk_period);
157 t2i = t0 - t2 - 1;
158 t2 -= 1;
160 val32 = readl(base + BK3710_DATSTB) & (0xFF << (dev ? 0 : 8));
161 val32 |= (t2 << (dev ? 8 : 0));
162 writel(val32, base + BK3710_DATSTB);
164 val32 = readl(base + BK3710_DATRCVR) & (0xFF << (dev ? 0 : 8));
165 val32 |= (t2i << (dev ? 8 : 0));
166 writel(val32, base + BK3710_DATRCVR);
168 if (mate) {
169 u8 mode2 = mate->pio_mode - XFER_PIO_0;
171 if (mode2 < mode)
172 mode = mode2;
175 /* TASKFILE Setup */
176 t0 = DIV_ROUND_UP(t->cyc8b, ideclk_period);
177 t2 = DIV_ROUND_UP(t->act8b, ideclk_period);
179 t2i = t0 - t2 - 1;
180 t2 -= 1;
182 val32 = readl(base + BK3710_REGSTB) & (0xFF << (dev ? 0 : 8));
183 val32 |= (t2 << (dev ? 8 : 0));
184 writel(val32, base + BK3710_REGSTB);
186 val32 = readl(base + BK3710_REGRCVR) & (0xFF << (dev ? 0 : 8));
187 val32 |= (t2i << (dev ? 8 : 0));
188 writel(val32, base + BK3710_REGRCVR);
191 static void palm_bk3710_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
193 int is_slave = drive->dn & 1;
194 void __iomem *base = (void *)hwif->dma_base;
195 const u8 xferspeed = drive->dma_mode;
197 if (xferspeed >= XFER_UDMA_0) {
198 palm_bk3710_setudmamode(base, is_slave,
199 xferspeed - XFER_UDMA_0);
200 } else {
201 palm_bk3710_setdmamode(base, is_slave,
202 drive->id[ATA_ID_EIDE_DMA_MIN],
203 xferspeed);
207 static void palm_bk3710_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
209 unsigned int cycle_time;
210 int is_slave = drive->dn & 1;
211 ide_drive_t *mate;
212 void __iomem *base = (void *)hwif->dma_base;
213 const u8 pio = drive->pio_mode - XFER_PIO_0;
216 * Obtain the drive PIO data for tuning the Palm Chip registers
218 cycle_time = ide_pio_cycle_time(drive, pio);
219 mate = ide_get_pair_dev(drive);
220 palm_bk3710_setpiomode(base, mate, is_slave, cycle_time, pio);
223 static void __devinit palm_bk3710_chipinit(void __iomem *base)
226 * REVISIT: the ATA reset signal needs to be managed through a
227 * GPIO, which means it should come from platform_data. Until
228 * we get and use such information, we have to trust that things
229 * have been reset before we get here.
233 * Program the IDETIMP Register Value based on the following assumptions
235 * (ATA_IDETIMP_IDEEN , ENABLE ) |
236 * (ATA_IDETIMP_PREPOST1 , DISABLE) |
237 * (ATA_IDETIMP_PREPOST0 , DISABLE) |
239 * DM6446 silicon rev 2.1 and earlier have no observed net benefit
240 * from enabling prefetch/postwrite.
242 writew(BIT(15), base + BK3710_IDETIMP);
245 * UDMACTL Ultra-ATA DMA Control
246 * (ATA_UDMACTL_UDMAP1 , 0 ) |
247 * (ATA_UDMACTL_UDMAP0 , 0 )
250 writew(0, base + BK3710_UDMACTL);
253 * MISCCTL Miscellaneous Conrol Register
254 * (ATA_MISCCTL_HWNHLD1P , 1 cycle)
255 * (ATA_MISCCTL_HWNHLD0P , 1 cycle)
256 * (ATA_MISCCTL_TIMORIDE , 1)
258 writel(0x001, base + BK3710_MISCCTL);
261 * IORDYTMP IORDY Timer for Primary Register
262 * (ATA_IORDYTMP_IORDYTMP , 0xffff )
264 writel(0xFFFF, base + BK3710_IORDYTMP);
267 * Configure BMISP Register
268 * (ATA_BMISP_DMAEN1 , DISABLE ) |
269 * (ATA_BMISP_DMAEN0 , DISABLE ) |
270 * (ATA_BMISP_IORDYINT , CLEAR) |
271 * (ATA_BMISP_INTRSTAT , CLEAR) |
272 * (ATA_BMISP_DMAERROR , CLEAR)
274 writew(0, base + BK3710_BMISP);
276 palm_bk3710_setpiomode(base, NULL, 0, 600, 0);
277 palm_bk3710_setpiomode(base, NULL, 1, 600, 0);
280 static u8 palm_bk3710_cable_detect(ide_hwif_t *hwif)
282 return ATA_CBL_PATA80;
285 static int __devinit palm_bk3710_init_dma(ide_hwif_t *hwif,
286 const struct ide_port_info *d)
288 printk(KERN_INFO " %s: MMIO-DMA\n", hwif->name);
290 if (ide_allocate_dma_engine(hwif))
291 return -1;
293 hwif->dma_base = hwif->io_ports.data_addr - IDE_PALM_ATA_PRI_REG_OFFSET;
295 return 0;
298 static const struct ide_port_ops palm_bk3710_ports_ops = {
299 .set_pio_mode = palm_bk3710_set_pio_mode,
300 .set_dma_mode = palm_bk3710_set_dma_mode,
301 .cable_detect = palm_bk3710_cable_detect,
304 static struct ide_port_info __devinitdata palm_bk3710_port_info = {
305 .init_dma = palm_bk3710_init_dma,
306 .port_ops = &palm_bk3710_ports_ops,
307 .dma_ops = &sff_dma_ops,
308 .host_flags = IDE_HFLAG_MMIO,
309 .pio_mask = ATA_PIO4,
310 .mwdma_mask = ATA_MWDMA2,
311 .chipset = ide_palm3710,
314 static int __init palm_bk3710_probe(struct platform_device *pdev)
316 struct clk *clk;
317 struct resource *mem, *irq;
318 void __iomem *base;
319 unsigned long rate, mem_size;
320 int i, rc;
321 struct ide_hw hw, *hws[] = { &hw };
323 clk = clk_get(&pdev->dev, NULL);
324 if (IS_ERR(clk))
325 return -ENODEV;
327 clk_enable(clk);
328 rate = clk_get_rate(clk);
330 /* NOTE: round *down* to meet minimum timings; we count in clocks */
331 ideclk_period = 1000000000UL / rate;
333 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
334 if (mem == NULL) {
335 printk(KERN_ERR "failed to get memory region resource\n");
336 return -ENODEV;
339 irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
340 if (irq == NULL) {
341 printk(KERN_ERR "failed to get IRQ resource\n");
342 return -ENODEV;
345 mem_size = resource_size(mem);
346 if (request_mem_region(mem->start, mem_size, "palm_bk3710") == NULL) {
347 printk(KERN_ERR "failed to request memory region\n");
348 return -EBUSY;
351 base = ioremap(mem->start, mem_size);
352 if (!base) {
353 printk(KERN_ERR "failed to map IO memory\n");
354 release_mem_region(mem->start, mem_size);
355 return -ENOMEM;
358 /* Configure the Palm Chip controller */
359 palm_bk3710_chipinit(base);
361 memset(&hw, 0, sizeof(hw));
362 for (i = 0; i < IDE_NR_PORTS - 2; i++)
363 hw.io_ports_array[i] = (unsigned long)
364 (base + IDE_PALM_ATA_PRI_REG_OFFSET + i);
365 hw.io_ports.ctl_addr = (unsigned long)
366 (base + IDE_PALM_ATA_PRI_CTL_OFFSET);
367 hw.irq = irq->start;
368 hw.dev = &pdev->dev;
370 palm_bk3710_port_info.udma_mask = rate < 100000000 ? ATA_UDMA4 :
371 ATA_UDMA5;
373 /* Register the IDE interface with Linux */
374 rc = ide_host_add(&palm_bk3710_port_info, hws, 1, NULL);
375 if (rc)
376 goto out;
378 return 0;
379 out:
380 printk(KERN_WARNING "Palm Chip BK3710 IDE Register Fail\n");
381 return rc;
384 /* work with hotplug and coldplug */
385 MODULE_ALIAS("platform:palm_bk3710");
387 static struct platform_driver platform_bk_driver = {
388 .driver = {
389 .name = "palm_bk3710",
390 .owner = THIS_MODULE,
394 static int __init palm_bk3710_init(void)
396 return platform_driver_probe(&platform_bk_driver, palm_bk3710_probe);
399 module_init(palm_bk3710_init);
400 MODULE_LICENSE("GPL");