2 * Copyright (C) 2010-2011 Michael Hennerich, Analog Devices Inc.
3 * Copyright (C) 2008-2010 Jonathan Cameron
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License version 2 as
7 * published by the Free Software Foundation.
15 #define AD799X_CHANNEL_SHIFT 4
16 #define AD799X_STORAGEBITS 16
18 * AD7991, AD7995 and AD7999 defines
21 #define AD7991_REF_SEL 0x08
22 #define AD7991_FLTR 0x04
23 #define AD7991_BIT_TRIAL_DELAY 0x02
24 #define AD7991_SAMPLE_DELAY 0x01
27 * AD7992, AD7993, AD7994, AD7997 and AD7998 defines
30 #define AD7998_FLTR 0x08
31 #define AD7998_ALERT_EN 0x04
32 #define AD7998_BUSY_ALERT 0x02
33 #define AD7998_BUSY_ALERT_POL 0x01
35 #define AD7998_CONV_RES_REG 0x0
36 #define AD7998_ALERT_STAT_REG 0x1
37 #define AD7998_CONF_REG 0x2
38 #define AD7998_CYCLE_TMR_REG 0x3
39 #define AD7998_DATALOW_CH1_REG 0x4
40 #define AD7998_DATAHIGH_CH1_REG 0x5
41 #define AD7998_HYST_CH1_REG 0x6
42 #define AD7998_DATALOW_CH2_REG 0x7
43 #define AD7998_DATAHIGH_CH2_REG 0x8
44 #define AD7998_HYST_CH2_REG 0x9
45 #define AD7998_DATALOW_CH3_REG 0xA
46 #define AD7998_DATAHIGH_CH3_REG 0xB
47 #define AD7998_HYST_CH3_REG 0xC
48 #define AD7998_DATALOW_CH4_REG 0xD
49 #define AD7998_DATAHIGH_CH4_REG 0xE
50 #define AD7998_HYST_CH4_REG 0xF
52 #define AD7998_CYC_MASK 0x7
53 #define AD7998_CYC_DIS 0x0
54 #define AD7998_CYC_TCONF_32 0x1
55 #define AD7998_CYC_TCONF_64 0x2
56 #define AD7998_CYC_TCONF_128 0x3
57 #define AD7998_CYC_TCONF_256 0x4
58 #define AD7998_CYC_TCONF_512 0x5
59 #define AD7998_CYC_TCONF_1024 0x6
60 #define AD7998_CYC_TCONF_2048 0x7
62 #define AD7998_ALERT_STAT_CLEAR 0xFF
65 * AD7997 and AD7997 defines
68 #define AD7997_8_READ_SINGLE 0x80
69 #define AD7997_8_READ_SEQUENCE 0x70
70 /* TODO: move this into a common header */
71 #define RES_MASK(bits) ((1 << (bits)) - 1)
87 * struct ad799x_chip_info - chip specifc information
88 * @channel: channel specification
89 * @num_channels: number of channels
90 * @int_vref_mv: the internal reference voltage
91 * @monitor_mode: whether the chip supports monitor interrupts
92 * @default_config: device default configuration
93 * @event_attrs: pointer to the monitor event attribute group
96 struct ad799x_chip_info
{
97 struct iio_chan_spec channel
[9];
101 const struct iio_info
*info
;
104 struct ad799x_state
{
105 struct i2c_client
*client
;
106 const struct ad799x_chip_info
*chip_info
;
108 struct iio_trigger
*trig
;
109 struct regulator
*reg
;
117 * TODO: struct ad799x_platform_data needs to go into include/linux/iio
120 struct ad799x_platform_data
{
124 int ad7997_8_set_scan_mode(struct ad799x_state
*st
, unsigned mask
);
126 #ifdef CONFIG_AD799X_RING_BUFFER
127 int ad799x_single_channel_from_ring(struct iio_dev
*indio_dev
, int channum
);
128 int ad799x_register_ring_funcs_and_init(struct iio_dev
*indio_dev
);
129 void ad799x_ring_cleanup(struct iio_dev
*indio_dev
);
130 #else /* CONFIG_AD799X_RING_BUFFER */
131 int ad799x_single_channel_from_ring(struct iio_dev
*indio_dev
, int channum
)
138 ad799x_register_ring_funcs_and_init(struct iio_dev
*indio_dev
)
143 static inline void ad799x_ring_cleanup(struct iio_dev
*indio_dev
)
146 #endif /* CONFIG_AD799X_RING_BUFFER */
147 #endif /* _AD799X_H_ */