Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
[linux-btrfs-devel.git] / sound / soc / sh / ssi.c
blob05192d97b377f586e5eab56f0e38ec841d35378d
1 /*
2 * Serial Sound Interface (I2S) support for SH7760/SH7780
4 * Copyright (c) 2007 Manuel Lauss <mano@roarinelk.homelinux.net>
6 * licensed under the terms outlined in the file COPYING at the root
7 * of the linux kernel sources.
9 * dont forget to set IPSEL/OMSEL register bits (in your board code) to
10 * enable SSI output pins!
14 * LIMITATIONS:
15 * The SSI unit has only one physical data line, so full duplex is
16 * impossible. This can be remedied on the SH7760 by using the
17 * other SSI unit for recording; however the SH7780 has only 1 SSI
18 * unit, and its pins are shared with the AC97 unit, among others.
20 * FEATURES:
21 * The SSI features "compressed mode": in this mode it continuously
22 * streams PCM data over the I2S lines and uses LRCK as a handshake
23 * signal. Can be used to send compressed data (AC3/DTS) to a DSP.
24 * The number of bits sent over the wire in a frame can be adjusted
25 * and can be independent from the actual sample bit depth. This is
26 * useful to support TDM mode codecs like the AD1939 which have a
27 * fixed TDM slot size, regardless of sample resolution.
30 #include <linux/init.h>
31 #include <linux/module.h>
32 #include <linux/platform_device.h>
33 #include <sound/core.h>
34 #include <sound/pcm.h>
35 #include <sound/initval.h>
36 #include <sound/soc.h>
37 #include <asm/io.h>
39 #define SSICR 0x00
40 #define SSISR 0x04
42 #define CR_DMAEN (1 << 28)
43 #define CR_CHNL_SHIFT 22
44 #define CR_CHNL_MASK (3 << CR_CHNL_SHIFT)
45 #define CR_DWL_SHIFT 19
46 #define CR_DWL_MASK (7 << CR_DWL_SHIFT)
47 #define CR_SWL_SHIFT 16
48 #define CR_SWL_MASK (7 << CR_SWL_SHIFT)
49 #define CR_SCK_MASTER (1 << 15) /* bitclock master bit */
50 #define CR_SWS_MASTER (1 << 14) /* wordselect master bit */
51 #define CR_SCKP (1 << 13) /* I2Sclock polarity */
52 #define CR_SWSP (1 << 12) /* LRCK polarity */
53 #define CR_SPDP (1 << 11)
54 #define CR_SDTA (1 << 10) /* i2s alignment (msb/lsb) */
55 #define CR_PDTA (1 << 9) /* fifo data alignment */
56 #define CR_DEL (1 << 8) /* delay data by 1 i2sclk */
57 #define CR_BREN (1 << 7) /* clock gating in burst mode */
58 #define CR_CKDIV_SHIFT 4
59 #define CR_CKDIV_MASK (7 << CR_CKDIV_SHIFT) /* bitclock divider */
60 #define CR_MUTE (1 << 3) /* SSI mute */
61 #define CR_CPEN (1 << 2) /* compressed mode */
62 #define CR_TRMD (1 << 1) /* transmit/receive select */
63 #define CR_EN (1 << 0) /* enable SSI */
65 #define SSIREG(reg) (*(unsigned long *)(ssi->mmio + (reg)))
67 struct ssi_priv {
68 unsigned long mmio;
69 unsigned long sysclk;
70 int inuse;
71 } ssi_cpu_data[] = {
72 #if defined(CONFIG_CPU_SUBTYPE_SH7760)
74 .mmio = 0xFE680000,
77 .mmio = 0xFE690000,
79 #elif defined(CONFIG_CPU_SUBTYPE_SH7780)
81 .mmio = 0xFFE70000,
83 #else
84 #error "Unsupported SuperH SoC"
85 #endif
89 * track usage of the SSI; it is simplex-only so prevent attempts of
90 * concurrent playback + capture. FIXME: any locking required?
92 static int ssi_startup(struct snd_pcm_substream *substream,
93 struct snd_soc_dai *dai)
95 struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
96 if (ssi->inuse) {
97 pr_debug("ssi: already in use!\n");
98 return -EBUSY;
99 } else
100 ssi->inuse = 1;
101 return 0;
104 static void ssi_shutdown(struct snd_pcm_substream *substream,
105 struct snd_soc_dai *dai)
107 struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
109 ssi->inuse = 0;
112 static int ssi_trigger(struct snd_pcm_substream *substream, int cmd,
113 struct snd_soc_dai *dai)
115 struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
117 switch (cmd) {
118 case SNDRV_PCM_TRIGGER_START:
119 SSIREG(SSICR) |= CR_DMAEN | CR_EN;
120 break;
121 case SNDRV_PCM_TRIGGER_STOP:
122 SSIREG(SSICR) &= ~(CR_DMAEN | CR_EN);
123 break;
124 default:
125 return -EINVAL;
128 return 0;
131 static int ssi_hw_params(struct snd_pcm_substream *substream,
132 struct snd_pcm_hw_params *params,
133 struct snd_soc_dai *dai)
135 struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
136 unsigned long ssicr = SSIREG(SSICR);
137 unsigned int bits, channels, swl, recv, i;
139 channels = params_channels(params);
140 bits = params->msbits;
141 recv = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? 0 : 1;
143 pr_debug("ssi_hw_params() enter\nssicr was %08lx\n", ssicr);
144 pr_debug("bits: %u channels: %u\n", bits, channels);
146 ssicr &= ~(CR_TRMD | CR_CHNL_MASK | CR_DWL_MASK | CR_PDTA |
147 CR_SWL_MASK);
149 /* direction (send/receive) */
150 if (!recv)
151 ssicr |= CR_TRMD; /* transmit */
153 /* channels */
154 if ((channels < 2) || (channels > 8) || (channels & 1)) {
155 pr_debug("ssi: invalid number of channels\n");
156 return -EINVAL;
158 ssicr |= ((channels >> 1) - 1) << CR_CHNL_SHIFT;
160 /* DATA WORD LENGTH (DWL): databits in audio sample */
161 i = 0;
162 switch (bits) {
163 case 32: ++i;
164 case 24: ++i;
165 case 22: ++i;
166 case 20: ++i;
167 case 18: ++i;
168 case 16: ++i;
169 ssicr |= i << CR_DWL_SHIFT;
170 case 8: break;
171 default:
172 pr_debug("ssi: invalid sample width\n");
173 return -EINVAL;
177 * SYSTEM WORD LENGTH: size in bits of half a frame over the I2S
178 * wires. This is usually bits_per_sample x channels/2; i.e. in
179 * Stereo mode the SWL equals DWL. SWL can be bigger than the
180 * product of (channels_per_slot x samplebits), e.g. for codecs
181 * like the AD1939 which only accept 32bit wide TDM slots. For
182 * "standard" I2S operation we set SWL = chans / 2 * DWL here.
183 * Waiting for ASoC to get TDM support ;-)
185 if ((bits > 16) && (bits <= 24)) {
186 bits = 24; /* these are padded by the SSI */
187 /*ssicr |= CR_PDTA;*/ /* cpu/data endianness ? */
189 i = 0;
190 swl = (bits * channels) / 2;
191 switch (swl) {
192 case 256: ++i;
193 case 128: ++i;
194 case 64: ++i;
195 case 48: ++i;
196 case 32: ++i;
197 case 16: ++i;
198 ssicr |= i << CR_SWL_SHIFT;
199 case 8: break;
200 default:
201 pr_debug("ssi: invalid system word length computed\n");
202 return -EINVAL;
205 SSIREG(SSICR) = ssicr;
207 pr_debug("ssi_hw_params() leave\nssicr is now %08lx\n", ssicr);
208 return 0;
211 static int ssi_set_sysclk(struct snd_soc_dai *cpu_dai, int clk_id,
212 unsigned int freq, int dir)
214 struct ssi_priv *ssi = &ssi_cpu_data[cpu_dai->id];
216 ssi->sysclk = freq;
218 return 0;
222 * This divider is used to generate the SSI_SCK (I2S bitclock) from the
223 * clock at the HAC_BIT_CLK ("oversampling clock") pin.
225 static int ssi_set_clkdiv(struct snd_soc_dai *dai, int did, int div)
227 struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
228 unsigned long ssicr;
229 int i;
231 i = 0;
232 ssicr = SSIREG(SSICR) & ~CR_CKDIV_MASK;
233 switch (div) {
234 case 16: ++i;
235 case 8: ++i;
236 case 4: ++i;
237 case 2: ++i;
238 SSIREG(SSICR) = ssicr | (i << CR_CKDIV_SHIFT);
239 case 1: break;
240 default:
241 pr_debug("ssi: invalid sck divider %d\n", div);
242 return -EINVAL;
245 return 0;
248 static int ssi_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
250 struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
251 unsigned long ssicr = SSIREG(SSICR);
253 pr_debug("ssi_set_fmt()\nssicr was 0x%08lx\n", ssicr);
255 ssicr &= ~(CR_DEL | CR_PDTA | CR_BREN | CR_SWSP | CR_SCKP |
256 CR_SWS_MASTER | CR_SCK_MASTER);
258 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
259 case SND_SOC_DAIFMT_I2S:
260 break;
261 case SND_SOC_DAIFMT_RIGHT_J:
262 ssicr |= CR_DEL | CR_PDTA;
263 break;
264 case SND_SOC_DAIFMT_LEFT_J:
265 ssicr |= CR_DEL;
266 break;
267 default:
268 pr_debug("ssi: unsupported format\n");
269 return -EINVAL;
272 switch (fmt & SND_SOC_DAIFMT_CLOCK_MASK) {
273 case SND_SOC_DAIFMT_CONT:
274 break;
275 case SND_SOC_DAIFMT_GATED:
276 ssicr |= CR_BREN;
277 break;
280 switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
281 case SND_SOC_DAIFMT_NB_NF:
282 ssicr |= CR_SCKP; /* sample data at low clkedge */
283 break;
284 case SND_SOC_DAIFMT_NB_IF:
285 ssicr |= CR_SCKP | CR_SWSP;
286 break;
287 case SND_SOC_DAIFMT_IB_NF:
288 break;
289 case SND_SOC_DAIFMT_IB_IF:
290 ssicr |= CR_SWSP; /* word select starts low */
291 break;
292 default:
293 pr_debug("ssi: invalid inversion\n");
294 return -EINVAL;
297 switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
298 case SND_SOC_DAIFMT_CBM_CFM:
299 break;
300 case SND_SOC_DAIFMT_CBS_CFM:
301 ssicr |= CR_SCK_MASTER;
302 break;
303 case SND_SOC_DAIFMT_CBM_CFS:
304 ssicr |= CR_SWS_MASTER;
305 break;
306 case SND_SOC_DAIFMT_CBS_CFS:
307 ssicr |= CR_SWS_MASTER | CR_SCK_MASTER;
308 break;
309 default:
310 pr_debug("ssi: invalid master/slave configuration\n");
311 return -EINVAL;
314 SSIREG(SSICR) = ssicr;
315 pr_debug("ssi_set_fmt() leave\nssicr is now 0x%08lx\n", ssicr);
317 return 0;
320 /* the SSI depends on an external clocksource (at HAC_BIT_CLK) even in
321 * Master mode, so really this is board specific; the SSI can do any
322 * rate with the right bitclk and divider settings.
324 #define SSI_RATES \
325 SNDRV_PCM_RATE_8000_192000
327 /* the SSI can do 8-32 bit samples, with 8 possible channels */
328 #define SSI_FMTS \
329 (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_U8 | \
330 SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_U16_LE | \
331 SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_U20_3LE | \
332 SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_U24_3LE | \
333 SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_U32_LE)
335 static struct snd_soc_dai_ops ssi_dai_ops = {
336 .startup = ssi_startup,
337 .shutdown = ssi_shutdown,
338 .trigger = ssi_trigger,
339 .hw_params = ssi_hw_params,
340 .set_sysclk = ssi_set_sysclk,
341 .set_clkdiv = ssi_set_clkdiv,
342 .set_fmt = ssi_set_fmt,
345 struct snd_soc_dai_driver sh4_ssi_dai[] = {
347 .name = "ssi-dai.0",
348 .playback = {
349 .rates = SSI_RATES,
350 .formats = SSI_FMTS,
351 .channels_min = 2,
352 .channels_max = 8,
354 .capture = {
355 .rates = SSI_RATES,
356 .formats = SSI_FMTS,
357 .channels_min = 2,
358 .channels_max = 8,
360 .ops = &ssi_dai_ops,
362 #ifdef CONFIG_CPU_SUBTYPE_SH7760
364 .name = "ssi-dai.1",
365 .playback = {
366 .rates = SSI_RATES,
367 .formats = SSI_FMTS,
368 .channels_min = 2,
369 .channels_max = 8,
371 .capture = {
372 .rates = SSI_RATES,
373 .formats = SSI_FMTS,
374 .channels_min = 2,
375 .channels_max = 8,
377 .ops = &ssi_dai_ops,
379 #endif
382 static int __devinit sh4_soc_dai_probe(struct platform_device *pdev)
384 return snd_soc_register_dais(&pdev->dev, sh4_ssi_dai,
385 ARRAY_SIZE(sh4_ssi_dai));
388 static int __devexit sh4_soc_dai_remove(struct platform_device *pdev)
390 snd_soc_unregister_dais(&pdev->dev, ARRAY_SIZE(sh4_ssi_dai));
391 return 0;
394 static struct platform_driver sh4_ssi_driver = {
395 .driver = {
396 .name = "sh4-ssi-dai",
397 .owner = THIS_MODULE,
400 .probe = sh4_soc_dai_probe,
401 .remove = __devexit_p(sh4_soc_dai_remove),
404 static int __init snd_sh4_ssi_init(void)
406 return platform_driver_register(&sh4_ssi_driver);
408 module_init(snd_sh4_ssi_init);
410 static void __exit snd_sh4_ssi_exit(void)
412 platform_driver_unregister(&sh4_ssi_driver);
414 module_exit(snd_sh4_ssi_exit);
416 MODULE_LICENSE("GPL");
417 MODULE_DESCRIPTION("SuperH onchip SSI (I2S) audio driver");
418 MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");