4 * Driver for SST25L SPI Flash chips
6 * Copyright © 2009 Bluewater Systems Ltd
7 * Author: Andre Renaud <andre@bluewatersys.com>
12 * This code is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License version 2 as
14 * published by the Free Software Foundation.
18 #include <linux/init.h>
19 #include <linux/module.h>
20 #include <linux/device.h>
21 #include <linux/mutex.h>
22 #include <linux/interrupt.h>
23 #include <linux/slab.h>
24 #include <linux/sched.h>
26 #include <linux/mtd/mtd.h>
27 #include <linux/mtd/partitions.h>
29 #include <linux/spi/spi.h>
30 #include <linux/spi/flash.h>
32 /* Erases can take up to 3 seconds! */
33 #define MAX_READY_WAIT_JIFFIES msecs_to_jiffies(3000)
35 #define SST25L_CMD_WRSR 0x01 /* Write status register */
36 #define SST25L_CMD_WRDI 0x04 /* Write disable */
37 #define SST25L_CMD_RDSR 0x05 /* Read status register */
38 #define SST25L_CMD_WREN 0x06 /* Write enable */
39 #define SST25L_CMD_READ 0x03 /* High speed read */
41 #define SST25L_CMD_EWSR 0x50 /* Enable write status register */
42 #define SST25L_CMD_SECTOR_ERASE 0x20 /* Erase sector */
43 #define SST25L_CMD_READ_ID 0x90 /* Read device ID */
44 #define SST25L_CMD_AAI_PROGRAM 0xaf /* Auto address increment */
46 #define SST25L_STATUS_BUSY (1 << 0) /* Chip is busy */
47 #define SST25L_STATUS_WREN (1 << 1) /* Write enabled */
48 #define SST25L_STATUS_BP0 (1 << 2) /* Block protection 0 */
49 #define SST25L_STATUS_BP1 (1 << 3) /* Block protection 1 */
52 struct spi_device
*spi
;
67 #define to_sst25l_flash(x) container_of(x, struct sst25l_flash, mtd)
69 static struct flash_info __devinitdata sst25l_flash_info
[] = {
70 {"sst25lf020a", 0xbf43, 256, 1024, 4096},
71 {"sst25lf040a", 0xbf44, 256, 2048, 4096},
74 static int sst25l_status(struct sst25l_flash
*flash
, int *status
)
77 struct spi_transfer t
;
78 unsigned char cmd_resp
[2];
82 memset(&t
, 0, sizeof(struct spi_transfer
));
84 cmd_resp
[0] = SST25L_CMD_RDSR
;
88 t
.len
= sizeof(cmd_resp
);
89 spi_message_add_tail(&t
, &m
);
90 err
= spi_sync(flash
->spi
, &m
);
94 *status
= cmd_resp
[1];
98 static int sst25l_write_enable(struct sst25l_flash
*flash
, int enable
)
100 unsigned char command
[2];
103 command
[0] = enable
? SST25L_CMD_WREN
: SST25L_CMD_WRDI
;
104 err
= spi_write(flash
->spi
, command
, 1);
108 command
[0] = SST25L_CMD_EWSR
;
109 err
= spi_write(flash
->spi
, command
, 1);
113 command
[0] = SST25L_CMD_WRSR
;
114 command
[1] = enable
? 0 : SST25L_STATUS_BP0
| SST25L_STATUS_BP1
;
115 err
= spi_write(flash
->spi
, command
, 2);
120 err
= sst25l_status(flash
, &status
);
123 if (!(status
& SST25L_STATUS_WREN
))
130 static int sst25l_wait_till_ready(struct sst25l_flash
*flash
)
132 unsigned long deadline
;
135 deadline
= jiffies
+ MAX_READY_WAIT_JIFFIES
;
137 err
= sst25l_status(flash
, &status
);
140 if (!(status
& SST25L_STATUS_BUSY
))
144 } while (!time_after_eq(jiffies
, deadline
));
149 static int sst25l_erase_sector(struct sst25l_flash
*flash
, uint32_t offset
)
151 unsigned char command
[4];
154 err
= sst25l_write_enable(flash
, 1);
158 command
[0] = SST25L_CMD_SECTOR_ERASE
;
159 command
[1] = offset
>> 16;
160 command
[2] = offset
>> 8;
162 err
= spi_write(flash
->spi
, command
, 4);
166 err
= sst25l_wait_till_ready(flash
);
170 return sst25l_write_enable(flash
, 0);
173 static int sst25l_erase(struct mtd_info
*mtd
, struct erase_info
*instr
)
175 struct sst25l_flash
*flash
= to_sst25l_flash(mtd
);
180 if (instr
->addr
+ instr
->len
> flash
->mtd
.size
)
183 if ((uint32_t)instr
->len
% mtd
->erasesize
)
186 if ((uint32_t)instr
->addr
% mtd
->erasesize
)
190 end
= addr
+ instr
->len
;
192 mutex_lock(&flash
->lock
);
194 err
= sst25l_wait_till_ready(flash
);
196 mutex_unlock(&flash
->lock
);
201 err
= sst25l_erase_sector(flash
, addr
);
203 mutex_unlock(&flash
->lock
);
204 instr
->state
= MTD_ERASE_FAILED
;
205 dev_err(&flash
->spi
->dev
, "Erase failed\n");
209 addr
+= mtd
->erasesize
;
212 mutex_unlock(&flash
->lock
);
214 instr
->state
= MTD_ERASE_DONE
;
215 mtd_erase_callback(instr
);
219 static int sst25l_read(struct mtd_info
*mtd
, loff_t from
, size_t len
,
220 size_t *retlen
, unsigned char *buf
)
222 struct sst25l_flash
*flash
= to_sst25l_flash(mtd
);
223 struct spi_transfer transfer
[2];
224 struct spi_message message
;
225 unsigned char command
[4];
228 /* Sanity checking */
232 if (from
+ len
> flash
->mtd
.size
)
238 spi_message_init(&message
);
239 memset(&transfer
, 0, sizeof(transfer
));
241 command
[0] = SST25L_CMD_READ
;
242 command
[1] = from
>> 16;
243 command
[2] = from
>> 8;
246 transfer
[0].tx_buf
= command
;
247 transfer
[0].len
= sizeof(command
);
248 spi_message_add_tail(&transfer
[0], &message
);
250 transfer
[1].rx_buf
= buf
;
251 transfer
[1].len
= len
;
252 spi_message_add_tail(&transfer
[1], &message
);
254 mutex_lock(&flash
->lock
);
256 /* Wait for previous write/erase to complete */
257 ret
= sst25l_wait_till_ready(flash
);
259 mutex_unlock(&flash
->lock
);
263 spi_sync(flash
->spi
, &message
);
265 if (retlen
&& message
.actual_length
> sizeof(command
))
266 *retlen
+= message
.actual_length
- sizeof(command
);
268 mutex_unlock(&flash
->lock
);
272 static int sst25l_write(struct mtd_info
*mtd
, loff_t to
, size_t len
,
273 size_t *retlen
, const unsigned char *buf
)
275 struct sst25l_flash
*flash
= to_sst25l_flash(mtd
);
276 int i
, j
, ret
, bytes
, copied
= 0;
277 unsigned char command
[5];
283 if (to
+ len
> flash
->mtd
.size
)
286 if ((uint32_t)to
% mtd
->writesize
)
289 mutex_lock(&flash
->lock
);
291 ret
= sst25l_write_enable(flash
, 1);
295 for (i
= 0; i
< len
; i
+= mtd
->writesize
) {
296 ret
= sst25l_wait_till_ready(flash
);
300 /* Write the first byte of the page */
301 command
[0] = SST25L_CMD_AAI_PROGRAM
;
302 command
[1] = (to
+ i
) >> 16;
303 command
[2] = (to
+ i
) >> 8;
304 command
[3] = (to
+ i
);
306 ret
= spi_write(flash
->spi
, command
, 5);
312 * Write the remaining bytes using auto address
315 bytes
= min_t(uint32_t, mtd
->writesize
, len
- i
);
316 for (j
= 1; j
< bytes
; j
++, copied
++) {
317 ret
= sst25l_wait_till_ready(flash
);
321 command
[1] = buf
[i
+ j
];
322 ret
= spi_write(flash
->spi
, command
, 2);
329 ret
= sst25l_write_enable(flash
, 0);
334 mutex_unlock(&flash
->lock
);
338 static struct flash_info
*__devinit
sst25l_match_device(struct spi_device
*spi
)
340 struct flash_info
*flash_info
= NULL
;
341 struct spi_message m
;
342 struct spi_transfer t
;
343 unsigned char cmd_resp
[6];
347 spi_message_init(&m
);
348 memset(&t
, 0, sizeof(struct spi_transfer
));
350 cmd_resp
[0] = SST25L_CMD_READ_ID
;
358 t
.len
= sizeof(cmd_resp
);
359 spi_message_add_tail(&t
, &m
);
360 err
= spi_sync(spi
, &m
);
362 dev_err(&spi
->dev
, "error reading device id\n");
366 id
= (cmd_resp
[4] << 8) | cmd_resp
[5];
368 for (i
= 0; i
< ARRAY_SIZE(sst25l_flash_info
); i
++)
369 if (sst25l_flash_info
[i
].device_id
== id
)
370 flash_info
= &sst25l_flash_info
[i
];
373 dev_err(&spi
->dev
, "unknown id %.4x\n", id
);
378 static int __devinit
sst25l_probe(struct spi_device
*spi
)
380 struct flash_info
*flash_info
;
381 struct sst25l_flash
*flash
;
382 struct flash_platform_data
*data
;
384 struct mtd_partition
*parts
= NULL
;
387 flash_info
= sst25l_match_device(spi
);
391 flash
= kzalloc(sizeof(struct sst25l_flash
), GFP_KERNEL
);
396 mutex_init(&flash
->lock
);
397 dev_set_drvdata(&spi
->dev
, flash
);
399 data
= spi
->dev
.platform_data
;
400 if (data
&& data
->name
)
401 flash
->mtd
.name
= data
->name
;
403 flash
->mtd
.name
= dev_name(&spi
->dev
);
405 flash
->mtd
.type
= MTD_NORFLASH
;
406 flash
->mtd
.flags
= MTD_CAP_NORFLASH
;
407 flash
->mtd
.erasesize
= flash_info
->erase_size
;
408 flash
->mtd
.writesize
= flash_info
->page_size
;
409 flash
->mtd
.size
= flash_info
->page_size
* flash_info
->nr_pages
;
410 flash
->mtd
.erase
= sst25l_erase
;
411 flash
->mtd
.read
= sst25l_read
;
412 flash
->mtd
.write
= sst25l_write
;
414 dev_info(&spi
->dev
, "%s (%lld KiB)\n", flash_info
->name
,
415 (long long)flash
->mtd
.size
>> 10);
417 DEBUG(MTD_DEBUG_LEVEL2
,
418 "mtd .name = %s, .size = 0x%llx (%lldMiB) "
419 ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
421 (long long)flash
->mtd
.size
, (long long)(flash
->mtd
.size
>> 20),
422 flash
->mtd
.erasesize
, flash
->mtd
.erasesize
/ 1024,
423 flash
->mtd
.numeraseregions
);
426 if (mtd_has_cmdlinepart()) {
427 static const char *part_probes
[] = {"cmdlinepart", NULL
};
429 nr_parts
= parse_mtd_partitions(&flash
->mtd
,
434 if (nr_parts
<= 0 && data
&& data
->parts
) {
436 nr_parts
= data
->nr_parts
;
440 for (i
= 0; i
< nr_parts
; i
++) {
441 DEBUG(MTD_DEBUG_LEVEL2
, "partitions[%d] = "
442 "{.name = %s, .offset = 0x%llx, "
443 ".size = 0x%llx (%lldKiB) }\n",
445 (long long)parts
[i
].offset
,
446 (long long)parts
[i
].size
,
447 (long long)(parts
[i
].size
>> 10));
450 flash
->partitioned
= 1;
451 return mtd_device_register(&flash
->mtd
, parts
,
455 ret
= mtd_device_register(&flash
->mtd
, NULL
, 0);
458 dev_set_drvdata(&spi
->dev
, NULL
);
465 static int __devexit
sst25l_remove(struct spi_device
*spi
)
467 struct sst25l_flash
*flash
= dev_get_drvdata(&spi
->dev
);
470 ret
= mtd_device_unregister(&flash
->mtd
);
476 static struct spi_driver sst25l_driver
= {
479 .bus
= &spi_bus_type
,
480 .owner
= THIS_MODULE
,
482 .probe
= sst25l_probe
,
483 .remove
= __devexit_p(sst25l_remove
),
486 static int __init
sst25l_init(void)
488 return spi_register_driver(&sst25l_driver
);
491 static void __exit
sst25l_exit(void)
493 spi_unregister_driver(&sst25l_driver
);
496 module_init(sst25l_init
);
497 module_exit(sst25l_exit
);
499 MODULE_DESCRIPTION("MTD SPI driver for SST25L Flash chips");
500 MODULE_AUTHOR("Andre Renaud <andre@bluewatersys.com>, "
502 MODULE_LICENSE("GPL");