include/linux/if_frad.h

   1 /*
   2  * DLCI/FRAD    Definitions for Frame Relay Access Devices.  DLCI devices are
   3  *              created for each DLCI associated with a FRAD.  The FRAD driver
   4  *              is not truly a network device, but the lower level device
   5  *              handler.  This allows other FRAD manufacturers to use the DLCI
   6  *              code, including its RFC1490 encapsulation alongside the current
   7  *              implementation for the Sangoma cards.
   8  *
   9  * Version:     @(#)if_ifrad.h  0.15    31 Mar 96
  10  *
  11  * Author:      Mike McLagan <mike.mclagan@linux.org>
  12  *
  13  * Changes:
  14  *              0.15    Mike McLagan    changed structure defs (packed)
  15  *                                      re-arranged flags
  16  *                                      added DLCI_RET vars
  17  *
  18  *              This program is free software; you can redistribute it and/or
  19  *              modify it under the terms of the GNU General Public License
  20  *              as published by the Free Software Foundation; either version
  21  *              2 of the License, or (at your option) any later version.
  22  */
  23
  24 #ifndef _FRAD_H_
  25 #define _FRAD_H_
  26
  27 #include <linux/if.h>
  28
  29 /* Structures and constants associated with the DLCI device driver */
  30
  31 struct dlci_add
  32 {
  33    char  devname[IFNAMSIZ];
  34    short dlci;
  35 };
  36
  37 #define DLCI_GET_CONF   (SIOCDEVPRIVATE + 2)
  38 #define DLCI_SET_CONF   (SIOCDEVPRIVATE + 3)
  39
  40 /*
  41  * These are related to the Sangoma SDLA and should remain in order.
  42  * Code within the SDLA module is based on the specifics of this
  43  * structure.  Change at your own peril.
  44  */
  45 struct dlci_conf {
  46    short flags;
  47    short CIR_fwd;
  48    short Bc_fwd;
  49    short Be_fwd;
  50    short CIR_bwd;
  51    short Bc_bwd;
  52    short Be_bwd;
  53
  54 /* these are part of the status read */
  55    short Tc_fwd;
  56    short Tc_bwd;
  57    short Tf_max;
  58    short Tb_max;
  59
  60 /* add any new fields here above is a mirror of sdla_dlci_conf */
  61 };
  62
  63 #define DLCI_GET_SLAVE  (SIOCDEVPRIVATE + 4)
  64
  65 /* configuration flags for DLCI */
  66 #define DLCI_IGNORE_CIR_OUT     0x0001
  67 #define DLCI_ACCOUNT_CIR_IN     0x0002
  68 #define DLCI_BUFFER_IF          0x0008
  69
  70 #define DLCI_VALID_FLAGS        0x000B
  71
  72 /* defines for the actual Frame Relay hardware */
  73 #define FRAD_GET_CONF   (SIOCDEVPRIVATE)
  74 #define FRAD_SET_CONF   (SIOCDEVPRIVATE + 1)
  75
  76 #define FRAD_LAST_IOCTL FRAD_SET_CONF
  77
  78 /*
  79  * Based on the setup for the Sangoma SDLA.  If changes are
  80  * necessary to this structure, a routine will need to be
  81  * added to that module to copy fields.
  82  */
  83 struct frad_conf
  84 {
  85    short station;
  86    short flags;
  87    short kbaud;
  88    short clocking;
  89    short mtu;
  90    short T391;
  91    short T392;
  92    short N391;
  93    short N392;
  94    short N393;
  95    short CIR_fwd;
  96    short Bc_fwd;
  97    short Be_fwd;
  98    short CIR_bwd;
  99    short Bc_bwd;
 100    short Be_bwd;
 101
 102 /* Add new fields here, above is a mirror of the sdla_conf */
 103
 104 };
 105
 106 #define FRAD_STATION_CPE        0x0000
 107 #define FRAD_STATION_NODE       0x0001
 108
 109 #define FRAD_TX_IGNORE_CIR      0x0001
 110 #define FRAD_RX_ACCOUNT_CIR     0x0002
 111 #define FRAD_DROP_ABORTED       0x0004
 112 #define FRAD_BUFFERIF           0x0008
 113 #define FRAD_STATS              0x0010
 114 #define FRAD_MCI                0x0100
 115 #define FRAD_AUTODLCI           0x8000
 116 #define FRAD_VALID_FLAGS        0x811F
 117
 118 #define FRAD_CLOCK_INT          0x0001
 119 #define FRAD_CLOCK_EXT          0x0000
 120
 121 #ifdef __KERNEL__
 122
 123 #if defined(CONFIG_DLCI) || defined(CONFIG_DLCI_MODULE)
 124
 125 /* these are the fields of an RFC 1490 header */
 126 struct frhdr
 127 {
 128    unsigned char  control;
 129
 130    /* for IP packets, this can be the NLPID */
 131    unsigned char  pad;
 132
 133    unsigned char  NLPID;
 134    unsigned char  OUI[3];
 135    __be16 PID;
 136
 137 #define IP_NLPID pad
 138 } __packed;
 139
 140 /* see RFC 1490 for the definition of the following */
 141 #define FRAD_I_UI               0x03
 142
 143 #define FRAD_P_PADDING          0x00
 144 #define FRAD_P_Q933             0x08
 145 #define FRAD_P_SNAP             0x80
 146 #define FRAD_P_CLNP             0x81
 147 #define FRAD_P_IP               0xCC
 148
 149 struct dlci_local
 150 {
 151    struct net_device      *master;
 152    struct net_device      *slave;
 153    struct dlci_conf       config;
 154    int                    configured;
 155    struct list_head       list;
 156
 157    /* callback function */
 158    void              (*receive)(struct sk_buff *skb, struct net_device *);
 159 };
 160
 161 struct frad_local
 162 {
 163    struct net_device_stats stats;
 164
 165    /* devices which this FRAD is slaved to */
 166    struct net_device     *master[CONFIG_DLCI_MAX];
 167    short             dlci[CONFIG_DLCI_MAX];
 168
 169    struct frad_conf  config;
 170    int               configured;        /* has this device been configured */
 171    int               initialized;       /* mem_start, port, irq set ? */
 172
 173    /* callback functions */
 174    int               (*activate)(struct net_device *, struct net_device *);
 175    int               (*deactivate)(struct net_device *, struct net_device *);
 176    int               (*assoc)(struct net_device *, struct net_device *);
 177    int               (*deassoc)(struct net_device *, struct net_device *);
 178    int               (*dlci_conf)(struct net_device *, struct net_device *, int get);
 179
 180    /* fields that are used by the Sangoma SDLA cards */
 181    struct timer_list timer;
 182    int               type;              /* adapter type */
 183    int               state;             /* state of the S502/8 control latch */
 184    int               buffer;            /* current buffer for S508 firmware */
 185 };
 186
 187 #endif /* CONFIG_DLCI || CONFIG_DLCI_MODULE */
 188
 189 extern void dlci_ioctl_set(int (*hook)(unsigned int, void __user *));
 190
 191 #endif /* __KERNEL__ */
 192
 193 #endif