temp: SR: IO_ADDRESS conversion
[linux-ginger.git] / arch / x86 / include / asm / geode.h
blobad3c2ed7548185f7c9891236e078bb98c62cb67c
1 /*
2 * AMD Geode definitions
3 * Copyright (C) 2006, Advanced Micro Devices, Inc.
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of version 2 of the GNU General Public License
7 * as published by the Free Software Foundation.
8 */
10 #ifndef _ASM_X86_GEODE_H
11 #define _ASM_X86_GEODE_H
13 #include <asm/processor.h>
14 #include <linux/io.h>
16 /* Generic southbridge functions */
18 #define GEODE_DEV_PMS 0
19 #define GEODE_DEV_ACPI 1
20 #define GEODE_DEV_GPIO 2
21 #define GEODE_DEV_MFGPT 3
23 extern int geode_get_dev_base(unsigned int dev);
25 /* Useful macros */
26 #define geode_pms_base() geode_get_dev_base(GEODE_DEV_PMS)
27 #define geode_acpi_base() geode_get_dev_base(GEODE_DEV_ACPI)
28 #define geode_gpio_base() geode_get_dev_base(GEODE_DEV_GPIO)
29 #define geode_mfgpt_base() geode_get_dev_base(GEODE_DEV_MFGPT)
31 /* MSRS */
33 #define MSR_GLIU_P2D_RO0 0x10000029
35 #define MSR_LX_GLD_MSR_CONFIG 0x48002001
36 #define MSR_LX_MSR_PADSEL 0x48002011 /* NOT 0x48000011; the data
37 * sheet has the wrong value */
38 #define MSR_GLCP_SYS_RSTPLL 0x4C000014
39 #define MSR_GLCP_DOTPLL 0x4C000015
41 #define MSR_LBAR_SMB 0x5140000B
42 #define MSR_LBAR_GPIO 0x5140000C
43 #define MSR_LBAR_MFGPT 0x5140000D
44 #define MSR_LBAR_ACPI 0x5140000E
45 #define MSR_LBAR_PMS 0x5140000F
47 #define MSR_DIVIL_SOFT_RESET 0x51400017
49 #define MSR_PIC_YSEL_LOW 0x51400020
50 #define MSR_PIC_YSEL_HIGH 0x51400021
51 #define MSR_PIC_ZSEL_LOW 0x51400022
52 #define MSR_PIC_ZSEL_HIGH 0x51400023
53 #define MSR_PIC_IRQM_LPC 0x51400025
55 #define MSR_MFGPT_IRQ 0x51400028
56 #define MSR_MFGPT_NR 0x51400029
57 #define MSR_MFGPT_SETUP 0x5140002B
59 #define MSR_LX_SPARE_MSR 0x80000011 /* DC-specific */
61 #define MSR_GX_GLD_MSR_CONFIG 0xC0002001
62 #define MSR_GX_MSR_PADSEL 0xC0002011
64 /* Resource Sizes */
66 #define LBAR_GPIO_SIZE 0xFF
67 #define LBAR_MFGPT_SIZE 0x40
68 #define LBAR_ACPI_SIZE 0x40
69 #define LBAR_PMS_SIZE 0x80
71 /* ACPI registers (PMS block) */
74 * PM1_EN is only valid when VSA is enabled for 16 bit reads.
75 * When VSA is not enabled, *always* read both PM1_STS and PM1_EN
76 * with a 32 bit read at offset 0x0
79 #define PM1_STS 0x00
80 #define PM1_EN 0x02
81 #define PM1_CNT 0x08
82 #define PM2_CNT 0x0C
83 #define PM_TMR 0x10
84 #define PM_GPE0_STS 0x18
85 #define PM_GPE0_EN 0x1C
87 /* PMC registers (PMS block) */
89 #define PM_SSD 0x00
90 #define PM_SCXA 0x04
91 #define PM_SCYA 0x08
92 #define PM_OUT_SLPCTL 0x0C
93 #define PM_SCLK 0x10
94 #define PM_SED 0x1
95 #define PM_SCXD 0x18
96 #define PM_SCYD 0x1C
97 #define PM_IN_SLPCTL 0x20
98 #define PM_WKD 0x30
99 #define PM_WKXD 0x34
100 #define PM_RD 0x38
101 #define PM_WKXA 0x3C
102 #define PM_FSD 0x40
103 #define PM_TSD 0x44
104 #define PM_PSD 0x48
105 #define PM_NWKD 0x4C
106 #define PM_AWKD 0x50
107 #define PM_SSC 0x54
109 /* VSA2 magic values */
111 #define VSA_VRC_INDEX 0xAC1C
112 #define VSA_VRC_DATA 0xAC1E
113 #define VSA_VR_UNLOCK 0xFC53 /* unlock virtual register */
114 #define VSA_VR_SIGNATURE 0x0003
115 #define VSA_VR_MEM_SIZE 0x0200
116 #define AMD_VSA_SIG 0x4132 /* signature is ascii 'VSA2' */
117 #define GSW_VSA_SIG 0x534d /* General Software signature */
118 /* GPIO */
120 #define GPIO_OUTPUT_VAL 0x00
121 #define GPIO_OUTPUT_ENABLE 0x04
122 #define GPIO_OUTPUT_OPEN_DRAIN 0x08
123 #define GPIO_OUTPUT_INVERT 0x0C
124 #define GPIO_OUTPUT_AUX1 0x10
125 #define GPIO_OUTPUT_AUX2 0x14
126 #define GPIO_PULL_UP 0x18
127 #define GPIO_PULL_DOWN 0x1C
128 #define GPIO_INPUT_ENABLE 0x20
129 #define GPIO_INPUT_INVERT 0x24
130 #define GPIO_INPUT_FILTER 0x28
131 #define GPIO_INPUT_EVENT_COUNT 0x2C
132 #define GPIO_READ_BACK 0x30
133 #define GPIO_INPUT_AUX1 0x34
134 #define GPIO_EVENTS_ENABLE 0x38
135 #define GPIO_LOCK_ENABLE 0x3C
136 #define GPIO_POSITIVE_EDGE_EN 0x40
137 #define GPIO_NEGATIVE_EDGE_EN 0x44
138 #define GPIO_POSITIVE_EDGE_STS 0x48
139 #define GPIO_NEGATIVE_EDGE_STS 0x4C
141 #define GPIO_MAP_X 0xE0
142 #define GPIO_MAP_Y 0xE4
143 #define GPIO_MAP_Z 0xE8
144 #define GPIO_MAP_W 0xEC
146 static inline u32 geode_gpio(unsigned int nr)
148 BUG_ON(nr > 28);
149 return 1 << nr;
152 extern void geode_gpio_set(u32, unsigned int);
153 extern void geode_gpio_clear(u32, unsigned int);
154 extern int geode_gpio_isset(u32, unsigned int);
155 extern void geode_gpio_setup_event(unsigned int, int, int);
156 extern void geode_gpio_set_irq(unsigned int, unsigned int);
158 static inline void geode_gpio_event_irq(unsigned int gpio, int pair)
160 geode_gpio_setup_event(gpio, pair, 0);
163 static inline void geode_gpio_event_pme(unsigned int gpio, int pair)
165 geode_gpio_setup_event(gpio, pair, 1);
168 /* Specific geode tests */
170 static inline int is_geode_gx(void)
172 return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
173 (boot_cpu_data.x86 == 5) &&
174 (boot_cpu_data.x86_model == 5));
177 static inline int is_geode_lx(void)
179 return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
180 (boot_cpu_data.x86 == 5) &&
181 (boot_cpu_data.x86_model == 10));
184 static inline int is_geode(void)
186 return (is_geode_gx() || is_geode_lx());
189 #ifdef CONFIG_MGEODE_LX
190 extern int geode_has_vsa2(void);
191 #else
192 static inline int geode_has_vsa2(void)
194 return 0;
196 #endif
198 /* MFGPTs */
200 #define MFGPT_MAX_TIMERS 8
201 #define MFGPT_TIMER_ANY (-1)
203 #define MFGPT_DOMAIN_WORKING 1
204 #define MFGPT_DOMAIN_STANDBY 2
205 #define MFGPT_DOMAIN_ANY (MFGPT_DOMAIN_WORKING | MFGPT_DOMAIN_STANDBY)
207 #define MFGPT_CMP1 0
208 #define MFGPT_CMP2 1
210 #define MFGPT_EVENT_IRQ 0
211 #define MFGPT_EVENT_NMI 1
212 #define MFGPT_EVENT_RESET 3
214 #define MFGPT_REG_CMP1 0
215 #define MFGPT_REG_CMP2 2
216 #define MFGPT_REG_COUNTER 4
217 #define MFGPT_REG_SETUP 6
219 #define MFGPT_SETUP_CNTEN (1 << 15)
220 #define MFGPT_SETUP_CMP2 (1 << 14)
221 #define MFGPT_SETUP_CMP1 (1 << 13)
222 #define MFGPT_SETUP_SETUP (1 << 12)
223 #define MFGPT_SETUP_STOPEN (1 << 11)
224 #define MFGPT_SETUP_EXTEN (1 << 10)
225 #define MFGPT_SETUP_REVEN (1 << 5)
226 #define MFGPT_SETUP_CLKSEL (1 << 4)
228 static inline void geode_mfgpt_write(int timer, u16 reg, u16 value)
230 u32 base = geode_get_dev_base(GEODE_DEV_MFGPT);
231 outw(value, base + reg + (timer * 8));
234 static inline u16 geode_mfgpt_read(int timer, u16 reg)
236 u32 base = geode_get_dev_base(GEODE_DEV_MFGPT);
237 return inw(base + reg + (timer * 8));
240 extern int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable);
241 extern int geode_mfgpt_set_irq(int timer, int cmp, int *irq, int enable);
242 extern int geode_mfgpt_alloc_timer(int timer, int domain);
244 #define geode_mfgpt_setup_irq(t, c, i) geode_mfgpt_set_irq((t), (c), (i), 1)
245 #define geode_mfgpt_release_irq(t, c, i) geode_mfgpt_set_irq((t), (c), (i), 0)
247 #ifdef CONFIG_GEODE_MFGPT_TIMER
248 extern int __init mfgpt_timer_setup(void);
249 #else
250 static inline int mfgpt_timer_setup(void) { return 0; }
251 #endif
253 #endif /* _ASM_X86_GEODE_H */