2 * linux/arch/arm/mach-sa1100/collie.c
4 * May be copied or modified under the terms of the GNU General Public
5 * License. See linux/COPYING for more information.
7 * This file contains all Collie-specific tweaks.
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
14 * 2006 Pavel Machek <pavel@suse.cz>
15 * 03-06-2004 John Lenz <lenz@cs.wisc.edu>
16 * 06-04-2002 Chris Larson <kergoth@digitalnemesis.net>
17 * 04-16-2001 Lineo Japan,Inc. ...
20 #include <linux/init.h>
21 #include <linux/kernel.h>
22 #include <linux/tty.h>
23 #include <linux/delay.h>
24 #include <linux/platform_device.h>
25 #include <linux/mtd/mtd.h>
26 #include <linux/mtd/partitions.h>
27 #include <linux/timer.h>
29 #include <mach/hardware.h>
30 #include <asm/mach-types.h>
32 #include <asm/setup.h>
33 #include <mach/collie.h>
35 #include <asm/mach/arch.h>
36 #include <asm/mach/flash.h>
37 #include <asm/mach/map.h>
38 #include <asm/mach/serial_sa1100.h>
40 #include <asm/hardware/scoop.h>
41 #include <asm/mach/sharpsl_param.h>
42 #include <asm/hardware/locomo.h>
47 static struct resource collie_scoop_resources
[] = {
51 .flags
= IORESOURCE_MEM
,
55 static struct scoop_config collie_scoop_setup
= {
56 .io_dir
= COLLIE_SCOOP_IO_DIR
,
57 .io_out
= COLLIE_SCOOP_IO_OUT
,
60 struct platform_device colliescoop_device
= {
61 .name
= "sharp-scoop",
64 .platform_data
= &collie_scoop_setup
,
66 .num_resources
= ARRAY_SIZE(collie_scoop_resources
),
67 .resource
= collie_scoop_resources
,
70 static struct scoop_pcmcia_dev collie_pcmcia_scoop
[] = {
72 .dev
= &colliescoop_device
.dev
,
73 .irq
= COLLIE_IRQ_GPIO_CF_IRQ
,
74 .cd_irq
= COLLIE_IRQ_GPIO_CF_CD
,
75 .cd_irq_str
= "PCMCIA0 CD",
79 static struct scoop_pcmcia_config collie_pcmcia_config
= {
80 .devs
= &collie_pcmcia_scoop
[0],
84 static struct mcp_plat_data collie_mcp_data
= {
85 .mccr0
= MCCR0_ADM
| MCCR0_ExtClk
,
89 #ifdef CONFIG_SHARP_LOCOMO
91 * low-level UART features.
93 struct platform_device collie_locomo_device
;
95 static void collie_uart_set_mctrl(struct uart_port
*port
, u_int mctrl
)
97 if (mctrl
& TIOCM_RTS
)
98 locomo_gpio_write(&collie_locomo_device
.dev
, LOCOMO_GPIO_RTS
, 0);
100 locomo_gpio_write(&collie_locomo_device
.dev
, LOCOMO_GPIO_RTS
, 1);
102 if (mctrl
& TIOCM_DTR
)
103 locomo_gpio_write(&collie_locomo_device
.dev
, LOCOMO_GPIO_DTR
, 0);
105 locomo_gpio_write(&collie_locomo_device
.dev
, LOCOMO_GPIO_DTR
, 1);
108 static u_int
collie_uart_get_mctrl(struct uart_port
*port
)
113 r
= locomo_gpio_read_output(&collie_locomo_device
.dev
, LOCOMO_GPIO_CTS
& LOCOMO_GPIO_DSR
);
116 if (r
& LOCOMO_GPIO_CTS
)
118 if (r
& LOCOMO_GPIO_DSR
)
124 static struct sa1100_port_fns collie_port_fns __initdata
= {
125 .set_mctrl
= collie_uart_set_mctrl
,
126 .get_mctrl
= collie_uart_get_mctrl
,
129 static int collie_uart_probe(struct locomo_dev
*dev
)
134 static int collie_uart_remove(struct locomo_dev
*dev
)
139 static struct locomo_driver collie_uart_driver
= {
141 .name
= "collie_uart",
143 .devid
= LOCOMO_DEVID_UART
,
144 .probe
= collie_uart_probe
,
145 .remove
= collie_uart_remove
,
148 static int __init
collie_uart_init(void) {
149 return locomo_driver_register(&collie_uart_driver
);
151 device_initcall(collie_uart_init
);
156 static struct resource locomo_resources
[] = {
160 .flags
= IORESOURCE_MEM
,
165 .flags
= IORESOURCE_IRQ
,
169 struct platform_device collie_locomo_device
= {
172 .num_resources
= ARRAY_SIZE(locomo_resources
),
173 .resource
= locomo_resources
,
176 static struct platform_device
*devices
[] __initdata
= {
177 &collie_locomo_device
,
181 static struct mtd_partition collie_partitions
[] = {
183 .name
= "bootloader",
186 .mask_flags
= MTD_WRITEABLE
189 .offset
= MTDPART_OFS_APPEND
,
193 .offset
= MTDPART_OFS_APPEND
,
198 static void collie_set_vpp(int vpp
)
200 write_scoop_reg(&colliescoop_device
.dev
, SCOOP_GPCR
, read_scoop_reg(&colliescoop_device
.dev
, SCOOP_GPCR
) | COLLIE_SCP_VPEN
);
202 write_scoop_reg(&colliescoop_device
.dev
, SCOOP_GPWR
, read_scoop_reg(&colliescoop_device
.dev
, SCOOP_GPWR
) | COLLIE_SCP_VPEN
);
204 write_scoop_reg(&colliescoop_device
.dev
, SCOOP_GPWR
, read_scoop_reg(&colliescoop_device
.dev
, SCOOP_GPWR
) & ~COLLIE_SCP_VPEN
);
207 static struct flash_platform_data collie_flash_data
= {
208 .map_name
= "cfi_probe",
209 .set_vpp
= collie_set_vpp
,
210 .parts
= collie_partitions
,
211 .nr_parts
= ARRAY_SIZE(collie_partitions
),
214 static struct resource collie_flash_resources
[] = {
216 .start
= SA1100_CS0_PHYS
,
217 .end
= SA1100_CS0_PHYS
+ SZ_32M
- 1,
218 .flags
= IORESOURCE_MEM
,
222 static void __init
collie_init(void)
227 GAFR
= GPIO_SSP_TXD
| GPIO_SSP_SCLK
| GPIO_SSP_SFRM
| GPIO_SSP_CLK
|
228 GPIO_MCP_CLK
| GPIO_32_768kHz
;
230 GPDR
= GPIO_LDD8
| GPIO_LDD9
| GPIO_LDD10
| GPIO_LDD11
| GPIO_LDD12
|
231 GPIO_LDD13
| GPIO_LDD14
| GPIO_LDD15
| GPIO_SSP_TXD
|
232 GPIO_SSP_SCLK
| GPIO_SSP_SFRM
| GPIO_SDLC_SCLK
|
233 COLLIE_GPIO_UCB1x00_RESET
| COLLIE_GPIO_nMIC_ON
|
234 COLLIE_GPIO_nREMOCON_ON
| GPIO_32_768kHz
;
236 PPDR
= PPC_LDD0
| PPC_LDD1
| PPC_LDD2
| PPC_LDD3
| PPC_LDD4
| PPC_LDD5
|
237 PPC_LDD6
| PPC_LDD7
| PPC_L_PCLK
| PPC_L_LCLK
| PPC_L_FCLK
| PPC_L_BIAS
|
238 PPC_TXD1
| PPC_TXD2
| PPC_TXD3
| PPC_TXD4
| PPC_SCLK
| PPC_SFRM
;
240 PWER
= COLLIE_GPIO_AC_IN
| COLLIE_GPIO_CO
| COLLIE_GPIO_ON_KEY
|
241 COLLIE_GPIO_WAKEUP
| COLLIE_GPIO_nREMOCON_INT
| PWER_RTC
;
243 PGSR
= COLLIE_GPIO_nREMOCON_ON
;
245 PSDR
= PPC_RXD1
| PPC_RXD2
| PPC_RXD3
| PPC_RXD4
;
250 platform_scoop_config
= &collie_pcmcia_config
;
252 ret
= platform_add_devices(devices
, ARRAY_SIZE(devices
));
254 printk(KERN_WARNING
"collie: Unable to register LoCoMo device\n");
257 sa11x0_set_flash_data(&collie_flash_data
, collie_flash_resources
,
258 ARRAY_SIZE(collie_flash_resources
));
259 sa11x0_set_mcp_data(&collie_mcp_data
);
261 sharpsl_save_param();
264 static struct map_desc collie_io_desc
[] __initdata
= {
265 { /* 32M main flash (cs0) */
266 .virtual = 0xe8000000,
267 .pfn
= __phys_to_pfn(0x00000000),
268 .length
= 0x02000000,
270 }, { /* 32M boot flash (cs1) */
271 .virtual = 0xea000000,
272 .pfn
= __phys_to_pfn(0x08000000),
273 .length
= 0x02000000,
278 static void __init
collie_map_io(void)
281 iotable_init(collie_io_desc
, ARRAY_SIZE(collie_io_desc
));
283 #ifdef CONFIG_SHARP_LOCOMO
284 sa1100_register_uart_fns(&collie_port_fns
);
286 sa1100_register_uart(0, 3);
287 sa1100_register_uart(1, 1);
290 MACHINE_START(COLLIE
, "Sharp-Collie")
291 .phys_io
= 0x80000000,
292 .io_pg_offst
= ((0xf8000000) >> 18) & 0xfffc,
293 .map_io
= collie_map_io
,
294 .init_irq
= sa1100_init_irq
,
295 .timer
= &sa1100_timer
,
296 .init_machine
= collie_init
,