?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
OMAP3 SRF: Add CORE rate table param in OMAP-PM
[linux-ginger.git] / arch / arm / plat-omap / dma.c
blob8836da32d63b5a2fa9554ef659fce7552c76215b
1 /*
2 * linux/arch/arm/plat-omap/dma.c
3 *
4 * Copyright (C) 2003 - 2008 Nokia Corporation
5 * Author: Juha Yrjölä <juha.yrjola@nokia.com>
6 * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
7 * Graphics DMA and LCD DMA graphics tranformations
8 * by Imre Deak <imre.deak@nokia.com>
9 * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc.
10 * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
11 * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
12 *
13 * Copyright (C) 2009 Texas Instruments
14 * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
15 *
16 * Support functions for the OMAP internal DMA channels.
17 *
18 * This program is free software; you can redistribute it and/or modify
19 * it under the terms of the GNU General Public License version 2 as
20 * published by the Free Software Foundation.
21 *
22 */
23
24 #include <linux/module.h>
25 #include <linux/init.h>
26 #include <linux/sched.h>
27 #include <linux/spinlock.h>
28 #include <linux/errno.h>
29 #include <linux/interrupt.h>
30 #include <linux/irq.h>
31 #include <linux/io.h>
32
33 #include <asm/system.h>
34 #include <mach/hardware.h>
35 #include <plat/dma.h>
36
37 #include <plat/tc.h>
38
39 #undef DEBUG
40
41 #ifndef CONFIG_ARCH_OMAP1
42 enum { DMA_CH_ALLOC_DONE, DMA_CH_PARAMS_SET_DONE, DMA_CH_STARTED,
43 DMA_CH_QUEUED, DMA_CH_NOTSTARTED, DMA_CH_PAUSED, DMA_CH_LINK_ENABLED
44 };
45
46 enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED };
47 #endif
48
49 #define OMAP_DMA_ACTIVE 0x01
50 #define OMAP_DMA_CCR_EN (1 << 7)
51 #define OMAP2_DMA_CSR_CLEAR_MASK 0xffe
52
53 #define OMAP_FUNC_MUX_ARM_BASE (0xfffe1000 + 0xec)
54
55 static int enable_1510_mode;
56
57 static struct omap_dma_global_context_registers {
58 u32 dma_irqenable_l0;
59 u32 dma_ocp_sysconfig;
60 u32 dma_gcr;
61 } omap_dma_global_context;
62
63 struct omap_dma_lch {
64 int next_lch;
65 int dev_id;
66 u16 saved_csr;
67 u16 enabled_irqs;
68 const char *dev_name;
69 void (*callback)(int lch, u16 ch_status, void *data);
70 void *data;
71
72 #ifndef CONFIG_ARCH_OMAP1
73 /* required for Dynamic chaining */
74 int prev_linked_ch;
75 int next_linked_ch;
76 int state;
77 int chain_id;
78
79 int status;
80 #endif
81 long flags;
82 };
83
84 struct dma_link_info {
85 int *linked_dmach_q;
86 int no_of_lchs_linked;
87
88 int q_count;
89 int q_tail;
90 int q_head;
91
92 int chain_state;
93 int chain_mode;
94
95 };
96
97 static struct dma_link_info *dma_linked_lch;
98
99 #ifndef CONFIG_ARCH_OMAP1
100
101 /* Chain handling macros */
102 #define OMAP_DMA_CHAIN_QINIT(chain_id) \
103 do { \
104 dma_linked_lch[chain_id].q_head = \
105 dma_linked_lch[chain_id].q_tail = \
106 dma_linked_lch[chain_id].q_count = 0; \
107 } while (0)
108 #define OMAP_DMA_CHAIN_QFULL(chain_id) \
109 (dma_linked_lch[chain_id].no_of_lchs_linked == \
110 dma_linked_lch[chain_id].q_count)
111 #define OMAP_DMA_CHAIN_QLAST(chain_id) \
112 do { \
113 ((dma_linked_lch[chain_id].no_of_lchs_linked-1) == \
114 dma_linked_lch[chain_id].q_count) \
115 } while (0)
116 #define OMAP_DMA_CHAIN_QEMPTY(chain_id) \
117 (0 == dma_linked_lch[chain_id].q_count)
118 #define __OMAP_DMA_CHAIN_INCQ(end) \
119 ((end) = ((end)+1) % dma_linked_lch[chain_id].no_of_lchs_linked)
120 #define OMAP_DMA_CHAIN_INCQHEAD(chain_id) \
121 do { \
122 __OMAP_DMA_CHAIN_INCQ(dma_linked_lch[chain_id].q_head); \
123 dma_linked_lch[chain_id].q_count--; \
124 } while (0)
125
126 #define OMAP_DMA_CHAIN_INCQTAIL(chain_id) \
127 do { \
128 __OMAP_DMA_CHAIN_INCQ(dma_linked_lch[chain_id].q_tail); \
129 dma_linked_lch[chain_id].q_count++; \
130 } while (0)
131 #endif
132
133 static int dma_lch_count;
134 static int dma_chan_count;
135 static int omap_dma_reserve_channels;
136
137 static spinlock_t dma_chan_lock;
138 static struct omap_dma_lch *dma_chan;
139 static void __iomem *omap_dma_base;
140
141 static const u8 omap1_dma_irq[OMAP1_LOGICAL_DMA_CH_COUNT] = {
142 INT_DMA_CH0_6, INT_DMA_CH1_7, INT_DMA_CH2_8, INT_DMA_CH3,
143 INT_DMA_CH4, INT_DMA_CH5, INT_1610_DMA_CH6, INT_1610_DMA_CH7,
144 INT_1610_DMA_CH8, INT_1610_DMA_CH9, INT_1610_DMA_CH10,
145 INT_1610_DMA_CH11, INT_1610_DMA_CH12, INT_1610_DMA_CH13,
146 INT_1610_DMA_CH14, INT_1610_DMA_CH15, INT_DMA_LCD
147 };
148
149 static inline void disable_lnk(int lch);
150 static void omap_disable_channel_irq(int lch);
151 static inline void omap_enable_channel_irq(int lch);
152
153 #define REVISIT_24XX() printk(KERN_ERR "FIXME: no %s on 24xx\n", \
154 __func__);
155
156 #define dma_read(reg) \
157 ({ \
158 u32 __val; \
159 if (cpu_class_is_omap1()) \
160 __val = __raw_readw(omap_dma_base + OMAP1_DMA_##reg); \
161 else \
162 __val = __raw_readl(omap_dma_base + OMAP_DMA4_##reg); \
163 __val; \
164 })
165
166 #define dma_write(val, reg) \
167 ({ \
168 if (cpu_class_is_omap1()) \
169 __raw_writew((u16)(val), omap_dma_base + OMAP1_DMA_##reg); \
170 else \
171 __raw_writel((val), omap_dma_base + OMAP_DMA4_##reg); \
172 })
173
174 #ifdef CONFIG_ARCH_OMAP15XX
175 /* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */
176 int omap_dma_in_1510_mode(void)
177 {
178 return enable_1510_mode;
179 }
180 #else
181 #define omap_dma_in_1510_mode() 0
182 #endif
183
184 #ifdef CONFIG_ARCH_OMAP1
185 static inline int get_gdma_dev(int req)
186 {
187 u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4;
188 int shift = ((req - 1) % 5) * 6;
189
190 return ((omap_readl(reg) >> shift) & 0x3f) + 1;
191 }
192
193 static inline void set_gdma_dev(int req, int dev)
194 {
195 u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4;
196 int shift = ((req - 1) % 5) * 6;
197 u32 l;
198
199 l = omap_readl(reg);
200 l &= ~(0x3f << shift);
201 l |= (dev - 1) << shift;
202 omap_writel(l, reg);
203 }
204 #else
205 #define set_gdma_dev(req, dev) do {} while (0)
206 #endif
207
208 /* Omap1 only */
209 static void clear_lch_regs(int lch)
210 {
211 int i;
212 void __iomem *lch_base = omap_dma_base + OMAP1_DMA_CH_BASE(lch);
213
214 for (i = 0; i < 0x2c; i += 2)
215 __raw_writew(0, lch_base + i);
216 }
217
218 void omap_set_dma_priority(int lch, int dst_port, int priority)
219 {
220 unsigned long reg;
221 u32 l;
222
223 if (cpu_class_is_omap1()) {
224 switch (dst_port) {
225 case OMAP_DMA_PORT_OCP_T1: /* FFFECC00 */
226 reg = OMAP_TC_OCPT1_PRIOR;
227 break;
228 case OMAP_DMA_PORT_OCP_T2: /* FFFECCD0 */
229 reg = OMAP_TC_OCPT2_PRIOR;
230 break;
231 case OMAP_DMA_PORT_EMIFF: /* FFFECC08 */
232 reg = OMAP_TC_EMIFF_PRIOR;
233 break;
234 case OMAP_DMA_PORT_EMIFS: /* FFFECC04 */
235 reg = OMAP_TC_EMIFS_PRIOR;
236 break;
237 default:
238 BUG();
239 return;
240 }
241 l = omap_readl(reg);
242 l &= ~(0xf << 8);
243 l |= (priority & 0xf) << 8;
244 omap_writel(l, reg);
245 }
246
247 if (cpu_class_is_omap2()) {
248 u32 ccr;
249
250 ccr = dma_read(CCR(lch));
251 if (priority)
252 ccr |= (1 << 6);
253 else
254 ccr &= ~(1 << 6);
255 dma_write(ccr, CCR(lch));
256 }
257 }
258 EXPORT_SYMBOL(omap_set_dma_priority);
259
260 void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
261 int frame_count, int sync_mode,
262 int dma_trigger, int src_or_dst_synch)
263 {
264 u32 l;
265
266 l = dma_read(CSDP(lch));
267 l &= ~0x03;
268 l |= data_type;
269 dma_write(l, CSDP(lch));
270
271 if (cpu_class_is_omap1()) {
272 u16 ccr;
273
274 ccr = dma_read(CCR(lch));
275 ccr &= ~(1 << 5);
276 if (sync_mode == OMAP_DMA_SYNC_FRAME)
277 ccr |= 1 << 5;
278 dma_write(ccr, CCR(lch));
279
280 ccr = dma_read(CCR2(lch));
281 ccr &= ~(1 << 2);
282 if (sync_mode == OMAP_DMA_SYNC_BLOCK)
283 ccr |= 1 << 2;
284 dma_write(ccr, CCR2(lch));
285 }
286
287 if (cpu_class_is_omap2() && dma_trigger) {
288 u32 val;
289
290 val = dma_read(CCR(lch));
291
292 /* DMA_SYNCHRO_CONTROL_UPPER depends on the channel number */
293 val &= ~((3 << 19) | 0x1f);
294 val |= (dma_trigger & ~0x1f) << 14;
295 val |= dma_trigger & 0x1f;
296
297 if (sync_mode & OMAP_DMA_SYNC_FRAME)
298 val |= 1 << 5;
299 else
300 val &= ~(1 << 5);
301
302 if (sync_mode & OMAP_DMA_SYNC_BLOCK)
303 val |= 1 << 18;
304 else
305 val &= ~(1 << 18);
306
307 if (src_or_dst_synch)
308 val |= 1 << 24; /* source synch */
309 else
310 val &= ~(1 << 24); /* dest synch */
311
312 dma_write(val, CCR(lch));
313 }
314
315 dma_write(elem_count, CEN(lch));
316 dma_write(frame_count, CFN(lch));
317 }
318 EXPORT_SYMBOL(omap_set_dma_transfer_params);
319
320 void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
321 {
322 BUG_ON(omap_dma_in_1510_mode());
323
324 if (cpu_class_is_omap1()) {
325 u16 w;
326
327 w = dma_read(CCR2(lch));
328 w &= ~0x03;
329
330 switch (mode) {
331 case OMAP_DMA_CONSTANT_FILL:
332 w |= 0x01;
333 break;
334 case OMAP_DMA_TRANSPARENT_COPY:
335 w |= 0x02;
336 break;
337 case OMAP_DMA_COLOR_DIS:
338 break;
339 default:
340 BUG();
341 }
342 dma_write(w, CCR2(lch));
343
344 w = dma_read(LCH_CTRL(lch));
345 w &= ~0x0f;
346 /* Default is channel type 2D */
347 if (mode) {
348 dma_write((u16)color, COLOR_L(lch));
349 dma_write((u16)(color >> 16), COLOR_U(lch));
350 w |= 1; /* Channel type G */
351 }
352 dma_write(w, LCH_CTRL(lch));
353 }
354
355 if (cpu_class_is_omap2()) {
356 u32 val;
357
358 val = dma_read(CCR(lch));
359 val &= ~((1 << 17) | (1 << 16));
360
361 switch (mode) {
362 case OMAP_DMA_CONSTANT_FILL:
363 val |= 1 << 16;
364 break;
365 case OMAP_DMA_TRANSPARENT_COPY:
366 val |= 1 << 17;
367 break;
368 case OMAP_DMA_COLOR_DIS:
369 break;
370 default:
371 BUG();
372 }
373 dma_write(val, CCR(lch));
374
375 color &= 0xffffff;
376 dma_write(color, COLOR(lch));
377 }
378 }
379 EXPORT_SYMBOL(omap_set_dma_color_mode);
380
381 void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode)
382 {
383 if (cpu_class_is_omap2()) {
384 u32 csdp;
385
386 csdp = dma_read(CSDP(lch));
387 csdp &= ~(0x3 << 16);
388 csdp |= (mode << 16);
389 dma_write(csdp, CSDP(lch));
390 }
391 }
392 EXPORT_SYMBOL(omap_set_dma_write_mode);
393
394 void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode)
395 {
396 if (cpu_class_is_omap1() && !cpu_is_omap15xx()) {
397 u32 l;
398
399 l = dma_read(LCH_CTRL(lch));
400 l &= ~0x7;
401 l |= mode;
402 dma_write(l, LCH_CTRL(lch));
403 }
404 }
405 EXPORT_SYMBOL(omap_set_dma_channel_mode);
406
407 /* Note that src_port is only for omap1 */
408 void omap_set_dma_src_params(int lch, int src_port, int src_amode,
409 unsigned long src_start,
410 int src_ei, int src_fi)
411 {
412 u32 l;
413
414 if (cpu_class_is_omap1()) {
415 u16 w;
416
417 w = dma_read(CSDP(lch));
418 w &= ~(0x1f << 2);
419 w |= src_port << 2;
420 dma_write(w, CSDP(lch));
421 }
422
423 l = dma_read(CCR(lch));
424 l &= ~(0x03 << 12);
425 l |= src_amode << 12;
426 dma_write(l, CCR(lch));
427
428 if (cpu_class_is_omap1()) {
429 dma_write(src_start >> 16, CSSA_U(lch));
430 dma_write((u16)src_start, CSSA_L(lch));
431 }
432
433 if (cpu_class_is_omap2())
434 dma_write(src_start, CSSA(lch));
435
436 dma_write(src_ei, CSEI(lch));
437 dma_write(src_fi, CSFI(lch));
438 }
439 EXPORT_SYMBOL(omap_set_dma_src_params);
440
441 void omap_set_dma_params(int lch, struct omap_dma_channel_params *params)
442 {
443 omap_set_dma_transfer_params(lch, params->data_type,
444 params->elem_count, params->frame_count,
445 params->sync_mode, params->trigger,
446 params->src_or_dst_synch);
447 omap_set_dma_src_params(lch, params->src_port,
448 params->src_amode, params->src_start,
449 params->src_ei, params->src_fi);
450
451 omap_set_dma_dest_params(lch, params->dst_port,
452 params->dst_amode, params->dst_start,
453 params->dst_ei, params->dst_fi);
454 if (params->read_prio || params->write_prio)
455 omap_dma_set_prio_lch(lch, params->read_prio,
456 params->write_prio);
457 }
458 EXPORT_SYMBOL(omap_set_dma_params);
459
460 void omap_set_dma_src_index(int lch, int eidx, int fidx)
461 {
462 if (cpu_class_is_omap2())
463 return;
464
465 dma_write(eidx, CSEI(lch));
466 dma_write(fidx, CSFI(lch));
467 }
468 EXPORT_SYMBOL(omap_set_dma_src_index);
469
470 void omap_set_dma_src_data_pack(int lch, int enable)
471 {
472 u32 l;
473
474 l = dma_read(CSDP(lch));
475 l &= ~(1 << 6);
476 if (enable)
477 l |= (1 << 6);
478 dma_write(l, CSDP(lch));
479 }
480 EXPORT_SYMBOL(omap_set_dma_src_data_pack);
481
482 void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
483 {
484 unsigned int burst = 0;
485 u32 l;
486
487 l = dma_read(CSDP(lch));
488 l &= ~(0x03 << 7);
489
490 switch (burst_mode) {
491 case OMAP_DMA_DATA_BURST_DIS:
492 break;
493 case OMAP_DMA_DATA_BURST_4:
494 if (cpu_class_is_omap2())
495 burst = 0x1;
496 else
497 burst = 0x2;
498 break;
499 case OMAP_DMA_DATA_BURST_8:
500 if (cpu_class_is_omap2()) {
501 burst = 0x2;
502 break;
503 }
504 /* not supported by current hardware on OMAP1
505 * w |= (0x03 << 7);
506 * fall through
507 */
508 case OMAP_DMA_DATA_BURST_16:
509 if (cpu_class_is_omap2()) {
510 burst = 0x3;
511 break;
512 }
513 /* OMAP1 don't support burst 16
514 * fall through
515 */
516 default:
517 BUG();
518 }
519
520 l |= (burst << 7);
521 dma_write(l, CSDP(lch));
522 }
523 EXPORT_SYMBOL(omap_set_dma_src_burst_mode);
524
525 /* Note that dest_port is only for OMAP1 */
526 void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
527 unsigned long dest_start,
528 int dst_ei, int dst_fi)
529 {
530 u32 l;
531
532 if (cpu_class_is_omap1()) {
533 l = dma_read(CSDP(lch));
534 l &= ~(0x1f << 9);
535 l |= dest_port << 9;
536 dma_write(l, CSDP(lch));
537 }
538
539 l = dma_read(CCR(lch));
540 l &= ~(0x03 << 14);
541 l |= dest_amode << 14;
542 dma_write(l, CCR(lch));
543
544 if (cpu_class_is_omap1()) {
545 dma_write(dest_start >> 16, CDSA_U(lch));
546 dma_write(dest_start, CDSA_L(lch));
547 }
548
549 if (cpu_class_is_omap2())
550 dma_write(dest_start, CDSA(lch));
551
552 dma_write(dst_ei, CDEI(lch));
553 dma_write(dst_fi, CDFI(lch));
554 }
555 EXPORT_SYMBOL(omap_set_dma_dest_params);
556
557 void omap_set_dma_dest_index(int lch, int eidx, int fidx)
558 {
559 if (cpu_class_is_omap2())
560 return;
561
562 dma_write(eidx, CDEI(lch));
563 dma_write(fidx, CDFI(lch));
564 }
565 EXPORT_SYMBOL(omap_set_dma_dest_index);
566
567 void omap_set_dma_dest_data_pack(int lch, int enable)
568 {
569 u32 l;
570
571 l = dma_read(CSDP(lch));
572 l &= ~(1 << 13);
573 if (enable)
574 l |= 1 << 13;
575 dma_write(l, CSDP(lch));
576 }
577 EXPORT_SYMBOL(omap_set_dma_dest_data_pack);
578
579 void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
580 {
581 unsigned int burst = 0;
582 u32 l;
583
584 l = dma_read(CSDP(lch));
585 l &= ~(0x03 << 14);
586
587 switch (burst_mode) {
588 case OMAP_DMA_DATA_BURST_DIS:
589 break;
590 case OMAP_DMA_DATA_BURST_4:
591 if (cpu_class_is_omap2())
592 burst = 0x1;
593 else
594 burst = 0x2;
595 break;
596 case OMAP_DMA_DATA_BURST_8:
597 if (cpu_class_is_omap2())
598 burst = 0x2;
599 else
600 burst = 0x3;
601 break;
602 case OMAP_DMA_DATA_BURST_16:
603 if (cpu_class_is_omap2()) {
604 burst = 0x3;
605 break;
606 }
607 /* OMAP1 don't support burst 16
608 * fall through
609 */
610 default:
611 printk(KERN_ERR "Invalid DMA burst mode\n");
612 BUG();
613 return;
614 }
615 l |= (burst << 14);
616 dma_write(l, CSDP(lch));
617 }
618 EXPORT_SYMBOL(omap_set_dma_dest_burst_mode);
619
620 static inline void omap_enable_channel_irq(int lch)
621 {
622 u32 status;
623
624 /* Clear CSR */
625 if (cpu_class_is_omap1())
626 status = dma_read(CSR(lch));
627 else if (cpu_class_is_omap2())
628 dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(lch));
629
630 /* Enable some nice interrupts. */
631 dma_write(dma_chan[lch].enabled_irqs, CICR(lch));
632 }
633
634 static void omap_disable_channel_irq(int lch)
635 {
636 if (cpu_class_is_omap2())
637 dma_write(0, CICR(lch));
638 }
639
640 void omap_enable_dma_irq(int lch, u16 bits)
641 {
642 dma_chan[lch].enabled_irqs |= bits;
643 }
644 EXPORT_SYMBOL(omap_enable_dma_irq);
645
646 void omap_disable_dma_irq(int lch, u16 bits)
647 {
648 dma_chan[lch].enabled_irqs &= ~bits;
649 }
650 EXPORT_SYMBOL(omap_disable_dma_irq);
651
652 static inline void enable_lnk(int lch)
653 {
654 u32 l;
655
656 l = dma_read(CLNK_CTRL(lch));
657
658 if (cpu_class_is_omap1())
659 l &= ~(1 << 14);
660
661 /* Set the ENABLE_LNK bits */
662 if (dma_chan[lch].next_lch != -1)
663 l = dma_chan[lch].next_lch | (1 << 15);
664
665 #ifndef CONFIG_ARCH_OMAP1
666 if (cpu_class_is_omap2())
667 if (dma_chan[lch].next_linked_ch != -1)
668 l = dma_chan[lch].next_linked_ch | (1 << 15);
669 #endif
670
671 dma_write(l, CLNK_CTRL(lch));
672 }
673
674 static inline void disable_lnk(int lch)
675 {
676 u32 l;
677
678 l = dma_read(CLNK_CTRL(lch));
679
680 /* Disable interrupts */
681 if (cpu_class_is_omap1()) {
682 dma_write(0, CICR(lch));
683 /* Set the STOP_LNK bit */
684 l |= 1 << 14;
685 }
686
687 if (cpu_class_is_omap2()) {
688 omap_disable_channel_irq(lch);
689 /* Clear the ENABLE_LNK bit */
690 l &= ~(1 << 15);
691 }
692
693 dma_write(l, CLNK_CTRL(lch));
694 dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
695 }
696
697 static inline void omap2_enable_irq_lch(int lch)
698 {
699 u32 val;
700
701 if (!cpu_class_is_omap2())
702 return;
703
704 val = dma_read(IRQENABLE_L0);
705 val |= 1 << lch;
706 dma_write(val, IRQENABLE_L0);
707 }
708
709 int omap_request_dma(int dev_id, const char *dev_name,
710 void (*callback)(int lch, u16 ch_status, void *data),
711 void *data, int *dma_ch_out)
712 {
713 int ch, free_ch = -1;
714 unsigned long flags;
715 struct omap_dma_lch *chan;
716
717 spin_lock_irqsave(&dma_chan_lock, flags);
718 for (ch = 0; ch < dma_chan_count; ch++) {
719 if (free_ch == -1 && dma_chan[ch].dev_id == -1) {
720 free_ch = ch;
721 if (dev_id == 0)
722 break;
723 }
724 }
725 if (free_ch == -1) {
726 spin_unlock_irqrestore(&dma_chan_lock, flags);
727 return -EBUSY;
728 }
729 chan = dma_chan + free_ch;
730 chan->dev_id = dev_id;
731
732 if (cpu_class_is_omap1())
733 clear_lch_regs(free_ch);
734
735 if (cpu_class_is_omap2())
736 omap_clear_dma(free_ch);
737
738 spin_unlock_irqrestore(&dma_chan_lock, flags);
739
740 chan->dev_name = dev_name;
741 chan->callback = callback;
742 chan->data = data;
743 chan->flags = 0;
744
745 #ifndef CONFIG_ARCH_OMAP1
746 if (cpu_class_is_omap2()) {
747 chan->chain_id = -1;
748 chan->next_linked_ch = -1;
749 }
750 #endif
751
752 chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
753
754 if (cpu_class_is_omap1())
755 chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ;
756 else if (cpu_class_is_omap2())
757 chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ |
758 OMAP2_DMA_TRANS_ERR_IRQ;
759
760 if (cpu_is_omap16xx()) {
761 /* If the sync device is set, configure it dynamically. */
762 if (dev_id != 0) {
763 set_gdma_dev(free_ch + 1, dev_id);
764 dev_id = free_ch + 1;
765 }
766 /*
767 * Disable the 1510 compatibility mode and set the sync device
768 * id.
769 */
770 dma_write(dev_id | (1 << 10), CCR(free_ch));
771 } else if (cpu_is_omap7xx() || cpu_is_omap15xx()) {
772 dma_write(dev_id, CCR(free_ch));
773 }
774
775 if (cpu_class_is_omap2()) {
776 omap2_enable_irq_lch(free_ch);
777 omap_enable_channel_irq(free_ch);
778 /* Clear the CSR register and IRQ status register */
779 dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(free_ch));
780 dma_write(1 << free_ch, IRQSTATUS_L0);
781 }
782
783 *dma_ch_out = free_ch;
784
785 return 0;
786 }
787 EXPORT_SYMBOL(omap_request_dma);
788
789 void omap_free_dma(int lch)
790 {
791 unsigned long flags;
792
793 if (dma_chan[lch].dev_id == -1) {
794 pr_err("omap_dma: trying to free unallocated DMA channel %d\n",
795 lch);
796 return;
797 }
798
799 if (cpu_class_is_omap1()) {
800 /* Disable all DMA interrupts for the channel. */
801 dma_write(0, CICR(lch));
802 /* Make sure the DMA transfer is stopped. */
803 dma_write(0, CCR(lch));
804 }
805
806 if (cpu_class_is_omap2()) {
807 u32 val;
808 /* Disable interrupts */
809 val = dma_read(IRQENABLE_L0);
810 val &= ~(1 << lch);
811 dma_write(val, IRQENABLE_L0);
812
813 /* Clear the CSR register and IRQ status register */
814 dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(lch));
815 dma_write(1 << lch, IRQSTATUS_L0);
816
817 /* Disable all DMA interrupts for the channel. */
818 dma_write(0, CICR(lch));
819
820 /* Make sure the DMA transfer is stopped. */
821 dma_write(0, CCR(lch));
822 omap_clear_dma(lch);
823 }
824
825 spin_lock_irqsave(&dma_chan_lock, flags);
826 dma_chan[lch].dev_id = -1;
827 dma_chan[lch].next_lch = -1;
828 dma_chan[lch].callback = NULL;
829 spin_unlock_irqrestore(&dma_chan_lock, flags);
830 }
831 EXPORT_SYMBOL(omap_free_dma);
832
833 /**
834 * @brief omap_dma_set_global_params : Set global priority settings for dma
835 *
836 * @param arb_rate
837 * @param max_fifo_depth
838 * @param tparams - Number of threads to reserve : DMA_THREAD_RESERVE_NORM
839 * DMA_THREAD_RESERVE_ONET
840 * DMA_THREAD_RESERVE_TWOT
841 * DMA_THREAD_RESERVE_THREET
842 */
843 void
844 omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams)
845 {
846 u32 reg;
847
848 if (!cpu_class_is_omap2()) {
849 printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __func__);
850 return;
851 }
852
853 if (max_fifo_depth == 0)
854 max_fifo_depth = 1;
855 if (arb_rate == 0)
856 arb_rate = 1;
857
858 reg = 0xff & max_fifo_depth;
859 reg |= (0x3 & tparams) << 12;
860 reg |= (arb_rate & 0xff) << 16;
861
862 dma_write(reg, GCR);
863 }
864 EXPORT_SYMBOL(omap_dma_set_global_params);
865
866 /**
867 * @brief omap_dma_set_prio_lch : Set channel wise priority settings
868 *
869 * @param lch
870 * @param read_prio - Read priority
871 * @param write_prio - Write priority
872 * Both of the above can be set with one of the following values :
873 * DMA_CH_PRIO_HIGH/DMA_CH_PRIO_LOW
874 */
875 int
876 omap_dma_set_prio_lch(int lch, unsigned char read_prio,
877 unsigned char write_prio)
878 {
879 u32 l;
880
881 if (unlikely((lch < 0 || lch >= dma_lch_count))) {
882 printk(KERN_ERR "Invalid channel id\n");
883 return -EINVAL;
884 }
885 l = dma_read(CCR(lch));
886 l &= ~((1 << 6) | (1 << 26));
887 if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx())
888 l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
889 else
890 l |= ((read_prio & 0x1) << 6);
891
892 dma_write(l, CCR(lch));
893
894 return 0;
895 }
896 EXPORT_SYMBOL(omap_dma_set_prio_lch);
897
898 /*
899 * Clears any DMA state so the DMA engine is ready to restart with new buffers
900 * through omap_start_dma(). Any buffers in flight are discarded.
901 */
902 void omap_clear_dma(int lch)
903 {
904 unsigned long flags;
905
906 local_irq_save(flags);
907
908 if (cpu_class_is_omap1()) {
909 u32 l;
910
911 l = dma_read(CCR(lch));
912 l &= ~OMAP_DMA_CCR_EN;
913 dma_write(l, CCR(lch));
914
915 /* Clear pending interrupts */
916 l = dma_read(CSR(lch));
917 }
918
919 if (cpu_class_is_omap2()) {
920 int i;
921 void __iomem *lch_base = omap_dma_base + OMAP_DMA4_CH_BASE(lch);
922 for (i = 0; i < 0x44; i += 4)
923 __raw_writel(0, lch_base + i);
924 }
925
926 local_irq_restore(flags);
927 }
928 EXPORT_SYMBOL(omap_clear_dma);
929
930 void omap_start_dma(int lch)
931 {
932 u32 l;
933
934 if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
935 int next_lch, cur_lch;
936 char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];
937
938 dma_chan_link_map[lch] = 1;
939 /* Set the link register of the first channel */
940 enable_lnk(lch);
941
942 memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
943 cur_lch = dma_chan[lch].next_lch;
944 do {
945 next_lch = dma_chan[cur_lch].next_lch;
946
947 /* The loop case: we've been here already */
948 if (dma_chan_link_map[cur_lch])
949 break;
950 /* Mark the current channel */
951 dma_chan_link_map[cur_lch] = 1;
952
953 enable_lnk(cur_lch);
954 omap_enable_channel_irq(cur_lch);
955
956 cur_lch = next_lch;
957 } while (next_lch != -1);
958 } else if (cpu_is_omap242x() ||
959 (cpu_is_omap243x() && omap_type() <= OMAP2430_REV_ES1_0)) {
960
961 /* Errata: Need to write lch even if not using chaining */
962 dma_write(lch, CLNK_CTRL(lch));
963 }
964
965 omap_enable_channel_irq(lch);
966
967 l = dma_read(CCR(lch));
968
969 /*
970 * Errata: On ES2.0 BUFFERING disable must be set.
971 * This will always fail on ES1.0
972 */
973 if (cpu_is_omap24xx())
974 l |= OMAP_DMA_CCR_EN;
975
976 l |= OMAP_DMA_CCR_EN;
977 dma_write(l, CCR(lch));
978
979 dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
980 }
981 EXPORT_SYMBOL(omap_start_dma);
982
983 void omap_stop_dma(int lch)
984 {
985 u32 l;
986
987 /* Disable all interrupts on the channel */
988 if (cpu_class_is_omap1())
989 dma_write(0, CICR(lch));
990
991 l = dma_read(CCR(lch));
992 l &= ~OMAP_DMA_CCR_EN;
993 dma_write(l, CCR(lch));
994
995 if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
996 int next_lch, cur_lch = lch;
997 char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];
998
999 memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
1000 do {
1001 /* The loop case: we've been here already */
1002 if (dma_chan_link_map[cur_lch])
1003 break;
1004 /* Mark the current channel */
1005 dma_chan_link_map[cur_lch] = 1;
1006
1007 disable_lnk(cur_lch);
1008
1009 next_lch = dma_chan[cur_lch].next_lch;
1010 cur_lch = next_lch;
1011 } while (next_lch != -1);
1012 }
1013
1014 dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
1015 }
1016 EXPORT_SYMBOL(omap_stop_dma);
1017
1018 /*
1019 * Allows changing the DMA callback function or data. This may be needed if
1020 * the driver shares a single DMA channel for multiple dma triggers.
1021 */
1022 int omap_set_dma_callback(int lch,
1023 void (*callback)(int lch, u16 ch_status, void *data),
1024 void *data)
1025 {
1026 unsigned long flags;
1027
1028 if (lch < 0)
1029 return -ENODEV;
1030
1031 spin_lock_irqsave(&dma_chan_lock, flags);
1032 if (dma_chan[lch].dev_id == -1) {
1033 printk(KERN_ERR "DMA callback for not set for free channel\n");
1034 spin_unlock_irqrestore(&dma_chan_lock, flags);
1035 return -EINVAL;
1036 }
1037 dma_chan[lch].callback = callback;
1038 dma_chan[lch].data = data;
1039 spin_unlock_irqrestore(&dma_chan_lock, flags);
1040
1041 return 0;
1042 }
1043 EXPORT_SYMBOL(omap_set_dma_callback);
1044
1045 /*
1046 * Returns current physical source address for the given DMA channel.
1047 * If the channel is running the caller must disable interrupts prior calling
1048 * this function and process the returned value before re-enabling interrupt to
1049 * prevent races with the interrupt handler. Note that in continuous mode there
1050 * is a chance for CSSA_L register overflow inbetween the two reads resulting
1051 * in incorrect return value.
1052 */
1053 dma_addr_t omap_get_dma_src_pos(int lch)
1054 {
1055 dma_addr_t offset = 0;
1056
1057 if (cpu_is_omap15xx())
1058 offset = dma_read(CPC(lch));
1059 else
1060 offset = dma_read(CSAC(lch));
1061
1062 /*
1063 * omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
1064 * read before the DMA controller finished disabling the channel.
1065 */
1066 if (!cpu_is_omap15xx() && offset == 0)
1067 offset = dma_read(CSAC(lch));
1068
1069 if (cpu_class_is_omap1())
1070 offset |= (dma_read(CSSA_U(lch)) << 16);
1071
1072 return offset;
1073 }
1074 EXPORT_SYMBOL(omap_get_dma_src_pos);
1075
1076 /*
1077 * Returns current physical destination address for the given DMA channel.
1078 * If the channel is running the caller must disable interrupts prior calling
1079 * this function and process the returned value before re-enabling interrupt to
1080 * prevent races with the interrupt handler. Note that in continuous mode there
1081 * is a chance for CDSA_L register overflow inbetween the two reads resulting
1082 * in incorrect return value.
1083 */
1084 dma_addr_t omap_get_dma_dst_pos(int lch)
1085 {
1086 dma_addr_t offset = 0;
1087
1088 if (cpu_is_omap15xx())
1089 offset = dma_read(CPC(lch));
1090 else
1091 offset = dma_read(CDAC(lch));
1092
1093 /*
1094 * omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
1095 * read before the DMA controller finished disabling the channel.
1096 */
1097 if (!cpu_is_omap15xx() && offset == 0)
1098 offset = dma_read(CDAC(lch));
1099
1100 if (cpu_class_is_omap1())
1101 offset |= (dma_read(CDSA_U(lch)) << 16);
1102
1103 return offset;
1104 }
1105 EXPORT_SYMBOL(omap_get_dma_dst_pos);
1106
1107 int omap_get_dma_active_status(int lch)
1108 {
1109 return (dma_read(CCR(lch)) & OMAP_DMA_CCR_EN) != 0;
1110 }
1111 EXPORT_SYMBOL(omap_get_dma_active_status);
1112
1113 int omap_dma_running(void)
1114 {
1115 int lch;
1116
1117 /* Check if LCD DMA is running */
1118 if (cpu_is_omap16xx())
1119 if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN)
1120 return 1;
1121
1122 for (lch = 0; lch < dma_chan_count; lch++)
1123 if (dma_read(CCR(lch)) & OMAP_DMA_CCR_EN)
1124 return 1;
1125
1126 return 0;
1127 }
1128
1129 /*
1130 * lch_queue DMA will start right after lch_head one is finished.
1131 * For this DMA link to start, you still need to start (see omap_start_dma)
1132 * the first one. That will fire up the entire queue.
1133 */
1134 void omap_dma_link_lch(int lch_head, int lch_queue)
1135 {
1136 if (omap_dma_in_1510_mode()) {
1137 if (lch_head == lch_queue) {
1138 dma_write(dma_read(CCR(lch_head)) | (3 << 8),
1139 CCR(lch_head));
1140 return;
1141 }
1142 printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
1143 BUG();
1144 return;
1145 }
1146
1147 if ((dma_chan[lch_head].dev_id == -1) ||
1148 (dma_chan[lch_queue].dev_id == -1)) {
1149 printk(KERN_ERR "omap_dma: trying to link "
1150 "non requested channels\n");
1151 dump_stack();
1152 }
1153
1154 dma_chan[lch_head].next_lch = lch_queue;
1155 }
1156 EXPORT_SYMBOL(omap_dma_link_lch);
1157
1158 /*
1159 * Once the DMA queue is stopped, we can destroy it.
1160 */
1161 void omap_dma_unlink_lch(int lch_head, int lch_queue)
1162 {
1163 if (omap_dma_in_1510_mode()) {
1164 if (lch_head == lch_queue) {
1165 dma_write(dma_read(CCR(lch_head)) & ~(3 << 8),
1166 CCR(lch_head));
1167 return;
1168 }
1169 printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
1170 BUG();
1171 return;
1172 }
1173
1174 if (dma_chan[lch_head].next_lch != lch_queue ||
1175 dma_chan[lch_head].next_lch == -1) {
1176 printk(KERN_ERR "omap_dma: trying to unlink "
1177 "non linked channels\n");
1178 dump_stack();
1179 }
1180
1181 if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) ||
1182 (dma_chan[lch_head].flags & OMAP_DMA_ACTIVE)) {
1183 printk(KERN_ERR "omap_dma: You need to stop the DMA channels "
1184 "before unlinking\n");
1185 dump_stack();
1186 }
1187
1188 dma_chan[lch_head].next_lch = -1;
1189 }
1190 EXPORT_SYMBOL(omap_dma_unlink_lch);
1191
1192 /*----------------------------------------------------------------------------*/
1193
1194 #ifndef CONFIG_ARCH_OMAP1
1195 /* Create chain of DMA channesls */
1196 static void create_dma_lch_chain(int lch_head, int lch_queue)
1197 {
1198 u32 l;
1199
1200 /* Check if this is the first link in chain */
1201 if (dma_chan[lch_head].next_linked_ch == -1) {
1202 dma_chan[lch_head].next_linked_ch = lch_queue;
1203 dma_chan[lch_head].prev_linked_ch = lch_queue;
1204 dma_chan[lch_queue].next_linked_ch = lch_head;
1205 dma_chan[lch_queue].prev_linked_ch = lch_head;
1206 }
1207
1208 /* a link exists, link the new channel in circular chain */
1209 else {
1210 dma_chan[lch_queue].next_linked_ch =
1211 dma_chan[lch_head].next_linked_ch;
1212 dma_chan[lch_queue].prev_linked_ch = lch_head;
1213 dma_chan[lch_head].next_linked_ch = lch_queue;
1214 dma_chan[dma_chan[lch_queue].next_linked_ch].prev_linked_ch =
1215 lch_queue;
1216 }
1217
1218 l = dma_read(CLNK_CTRL(lch_head));
1219 l &= ~(0x1f);
1220 l |= lch_queue;
1221 dma_write(l, CLNK_CTRL(lch_head));
1222
1223 l = dma_read(CLNK_CTRL(lch_queue));
1224 l &= ~(0x1f);
1225 l |= (dma_chan[lch_queue].next_linked_ch);
1226 dma_write(l, CLNK_CTRL(lch_queue));
1227 }
1228
1229 /**
1230 * @brief omap_request_dma_chain : Request a chain of DMA channels
1231 *
1232 * @param dev_id - Device id using the dma channel
1233 * @param dev_name - Device name
1234 * @param callback - Call back function
1235 * @chain_id -
1236 * @no_of_chans - Number of channels requested
1237 * @chain_mode - Dynamic or static chaining : OMAP_DMA_STATIC_CHAIN
1238 * OMAP_DMA_DYNAMIC_CHAIN
1239 * @params - Channel parameters
1240 *
1241 * @return - Succes : 0
1242 * Failure: -EINVAL/-ENOMEM
1243 */
1244 int omap_request_dma_chain(int dev_id, const char *dev_name,
1245 void (*callback) (int lch, u16 ch_status,
1246 void *data),
1247 int *chain_id, int no_of_chans, int chain_mode,
1248 struct omap_dma_channel_params params)
1249 {
1250 int *channels;
1251 int i, err;
1252
1253 /* Is the chain mode valid ? */
1254 if (chain_mode != OMAP_DMA_STATIC_CHAIN
1255 && chain_mode != OMAP_DMA_DYNAMIC_CHAIN) {
1256 printk(KERN_ERR "Invalid chain mode requested\n");
1257 return -EINVAL;
1258 }
1259
1260 if (unlikely((no_of_chans < 1
1261 || no_of_chans > dma_lch_count))) {
1262 printk(KERN_ERR "Invalid Number of channels requested\n");
1263 return -EINVAL;
1264 }
1265
1266 /* Allocate a queue to maintain the status of the channels
1267 * in the chain */
1268 channels = kmalloc(sizeof(*channels) * no_of_chans, GFP_KERNEL);
1269 if (channels == NULL) {
1270 printk(KERN_ERR "omap_dma: No memory for channel queue\n");
1271 return -ENOMEM;
1272 }
1273
1274 /* request and reserve DMA channels for the chain */
1275 for (i = 0; i < no_of_chans; i++) {
1276 err = omap_request_dma(dev_id, dev_name,
1277 callback, NULL, &channels[i]);
1278 if (err < 0) {
1279 int j;
1280 for (j = 0; j < i; j++)
1281 omap_free_dma(channels[j]);
1282 kfree(channels);
1283 printk(KERN_ERR "omap_dma: Request failed %d\n", err);
1284 return err;
1285 }
1286 dma_chan[channels[i]].prev_linked_ch = -1;
1287 dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;
1288
1289 /*
1290 * Allowing client drivers to set common parameters now,
1291 * so that later only relevant (src_start, dest_start
1292 * and element count) can be set
1293 */
1294 omap_set_dma_params(channels[i], &params);
1295 }
1296
1297 *chain_id = channels[0];
1298 dma_linked_lch[*chain_id].linked_dmach_q = channels;
1299 dma_linked_lch[*chain_id].chain_mode = chain_mode;
1300 dma_linked_lch[*chain_id].chain_state = DMA_CHAIN_NOTSTARTED;
1301 dma_linked_lch[*chain_id].no_of_lchs_linked = no_of_chans;
1302
1303 for (i = 0; i < no_of_chans; i++)
1304 dma_chan[channels[i]].chain_id = *chain_id;
1305
1306 /* Reset the Queue pointers */
1307 OMAP_DMA_CHAIN_QINIT(*chain_id);
1308
1309 /* Set up the chain */
1310 if (no_of_chans == 1)
1311 create_dma_lch_chain(channels[0], channels[0]);
1312 else {
1313 for (i = 0; i < (no_of_chans - 1); i++)
1314 create_dma_lch_chain(channels[i], channels[i + 1]);
1315 }
1316
1317 return 0;
1318 }
1319 EXPORT_SYMBOL(omap_request_dma_chain);
1320
1321 /**
1322 * @brief omap_modify_dma_chain_param : Modify the chain's params - Modify the
1323 * params after setting it. Dont do this while dma is running!!
1324 *
1325 * @param chain_id - Chained logical channel id.
1326 * @param params
1327 *
1328 * @return - Success : 0
1329 * Failure : -EINVAL
1330 */
1331 int omap_modify_dma_chain_params(int chain_id,
1332 struct omap_dma_channel_params params)
1333 {
1334 int *channels;
1335 u32 i;
1336
1337 /* Check for input params */
1338 if (unlikely((chain_id < 0
1339 || chain_id >= dma_lch_count))) {
1340 printk(KERN_ERR "Invalid chain id\n");
1341 return -EINVAL;
1342 }
1343
1344 /* Check if the chain exists */
1345 if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
1346 printk(KERN_ERR "Chain doesn't exists\n");
1347 return -EINVAL;
1348 }
1349 channels = dma_linked_lch[chain_id].linked_dmach_q;
1350
1351 for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {
1352 /*
1353 * Allowing client drivers to set common parameters now,
1354 * so that later only relevant (src_start, dest_start
1355 * and element count) can be set
1356 */
1357 omap_set_dma_params(channels[i], &params);
1358 }
1359
1360 return 0;
1361 }
1362 EXPORT_SYMBOL(omap_modify_dma_chain_params);
1363
1364 /**
1365 * @brief omap_free_dma_chain - Free all the logical channels in a chain.
1366 *
1367 * @param chain_id
1368 *
1369 * @return - Success : 0
1370 * Failure : -EINVAL
1371 */
1372 int omap_free_dma_chain(int chain_id)
1373 {
1374 int *channels;
1375 u32 i;
1376
1377 /* Check for input params */
1378 if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
1379 printk(KERN_ERR "Invalid chain id\n");
1380 return -EINVAL;
1381 }
1382
1383 /* Check if the chain exists */
1384 if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
1385 printk(KERN_ERR "Chain doesn't exists\n");
1386 return -EINVAL;
1387 }
1388
1389 channels = dma_linked_lch[chain_id].linked_dmach_q;
1390 for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {
1391 dma_chan[channels[i]].next_linked_ch = -1;
1392 dma_chan[channels[i]].prev_linked_ch = -1;
1393 dma_chan[channels[i]].chain_id = -1;
1394 dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;
1395 omap_free_dma(channels[i]);
1396 }
1397
1398 kfree(channels);
1399
1400 dma_linked_lch[chain_id].linked_dmach_q = NULL;
1401 dma_linked_lch[chain_id].chain_mode = -1;
1402 dma_linked_lch[chain_id].chain_state = -1;
1403
1404 return (0);
1405 }
1406 EXPORT_SYMBOL(omap_free_dma_chain);
1407
1408 /**
1409 * @brief omap_dma_chain_status - Check if the chain is in
1410 * active / inactive state.
1411 * @param chain_id
1412 *
1413 * @return - Success : OMAP_DMA_CHAIN_ACTIVE/OMAP_DMA_CHAIN_INACTIVE
1414 * Failure : -EINVAL
1415 */
1416 int omap_dma_chain_status(int chain_id)
1417 {
1418 /* Check for input params */
1419 if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
1420 printk(KERN_ERR "Invalid chain id\n");
1421 return -EINVAL;
1422 }
1423
1424 /* Check if the chain exists */
1425 if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
1426 printk(KERN_ERR "Chain doesn't exists\n");
1427 return -EINVAL;
1428 }
1429 pr_debug("CHAINID=%d, qcnt=%d\n", chain_id,
1430 dma_linked_lch[chain_id].q_count);
1431
1432 if (OMAP_DMA_CHAIN_QEMPTY(chain_id))
1433 return OMAP_DMA_CHAIN_INACTIVE;
1434
1435 return OMAP_DMA_CHAIN_ACTIVE;
1436 }
1437 EXPORT_SYMBOL(omap_dma_chain_status);
1438
1439 /**
1440 * @brief omap_dma_chain_a_transfer - Get a free channel from a chain,
1441 * set the params and start the transfer.
1442 *
1443 * @param chain_id
1444 * @param src_start - buffer start address
1445 * @param dest_start - Dest address
1446 * @param elem_count
1447 * @param frame_count
1448 * @param callbk_data - channel callback parameter data.
1449 *
1450 * @return - Success : 0
1451 * Failure: -EINVAL/-EBUSY
1452 */
1453 int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
1454 int elem_count, int frame_count, void *callbk_data)
1455 {
1456 int *channels;
1457 u32 l, lch;
1458 int start_dma = 0;
1459
1460 /*
1461 * if buffer size is less than 1 then there is
1462 * no use of starting the chain
1463 */
1464 if (elem_count < 1) {
1465 printk(KERN_ERR "Invalid buffer size\n");
1466 return -EINVAL;
1467 }
1468
1469 /* Check for input params */
1470 if (unlikely((chain_id < 0
1471 || chain_id >= dma_lch_count))) {
1472 printk(KERN_ERR "Invalid chain id\n");
1473 return -EINVAL;
1474 }
1475
1476 /* Check if the chain exists */
1477 if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
1478 printk(KERN_ERR "Chain doesn't exist\n");
1479 return -EINVAL;
1480 }
1481
1482 /* Check if all the channels in chain are in use */
1483 if (OMAP_DMA_CHAIN_QFULL(chain_id))
1484 return -EBUSY;
1485
1486 /* Frame count may be negative in case of indexed transfers */
1487 channels = dma_linked_lch[chain_id].linked_dmach_q;
1488
1489 /* Get a free channel */
1490 lch = channels[dma_linked_lch[chain_id].q_tail];
1491
1492 /* Store the callback data */
1493 dma_chan[lch].data = callbk_data;
1494
1495 /* Increment the q_tail */
1496 OMAP_DMA_CHAIN_INCQTAIL(chain_id);
1497
1498 /* Set the params to the free channel */
1499 if (src_start != 0)
1500 dma_write(src_start, CSSA(lch));
1501 if (dest_start != 0)
1502 dma_write(dest_start, CDSA(lch));
1503
1504 /* Write the buffer size */
1505 dma_write(elem_count, CEN(lch));
1506 dma_write(frame_count, CFN(lch));
1507
1508 /*
1509 * If the chain is dynamically linked,
1510 * then we may have to start the chain if its not active
1511 */
1512 if (dma_linked_lch[chain_id].chain_mode == OMAP_DMA_DYNAMIC_CHAIN) {
1513
1514 /*
1515 * In Dynamic chain, if the chain is not started,
1516 * queue the channel
1517 */
1518 if (dma_linked_lch[chain_id].chain_state ==
1519 DMA_CHAIN_NOTSTARTED) {
1520 /* Enable the link in previous channel */
1521 if (dma_chan[dma_chan[lch].prev_linked_ch].state ==
1522 DMA_CH_QUEUED)
1523 enable_lnk(dma_chan[lch].prev_linked_ch);
1524 dma_chan[lch].state = DMA_CH_QUEUED;
1525 }
1526
1527 /*
1528 * Chain is already started, make sure its active,
1529 * if not then start the chain
1530 */
1531 else {
1532 start_dma = 1;
1533
1534 if (dma_chan[dma_chan[lch].prev_linked_ch].state ==
1535 DMA_CH_STARTED) {
1536 enable_lnk(dma_chan[lch].prev_linked_ch);
1537 dma_chan[lch].state = DMA_CH_QUEUED;
1538 start_dma = 0;
1539 if (0 == ((1 << 7) & dma_read(
1540 CCR(dma_chan[lch].prev_linked_ch)))) {
1541 disable_lnk(dma_chan[lch].
1542 prev_linked_ch);
1543 pr_debug("\n prev ch is stopped\n");
1544 start_dma = 1;
1545 }
1546 }
1547
1548 else if (dma_chan[dma_chan[lch].prev_linked_ch].state
1549 == DMA_CH_QUEUED) {
1550 enable_lnk(dma_chan[lch].prev_linked_ch);
1551 dma_chan[lch].state = DMA_CH_QUEUED;
1552 start_dma = 0;
1553 }
1554 omap_enable_channel_irq(lch);
1555
1556 l = dma_read(CCR(lch));
1557
1558 if ((0 == (l & (1 << 24))))
1559 l &= ~(1 << 25);
1560 else
1561 l |= (1 << 25);
1562 if (start_dma == 1) {
1563 if (0 == (l & (1 << 7))) {
1564 l |= (1 << 7);
1565 dma_chan[lch].state = DMA_CH_STARTED;
1566 pr_debug("starting %d\n", lch);
1567 dma_write(l, CCR(lch));
1568 } else
1569 start_dma = 0;
1570 } else {
1571 if (0 == (l & (1 << 7)))
1572 dma_write(l, CCR(lch));
1573 }
1574 dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
1575 }
1576 }
1577
1578 return 0;
1579 }
1580 EXPORT_SYMBOL(omap_dma_chain_a_transfer);
1581
1582 /**
1583 * @brief omap_start_dma_chain_transfers - Start the chain
1584 *
1585 * @param chain_id
1586 *
1587 * @return - Success : 0
1588 * Failure : -EINVAL/-EBUSY
1589 */
1590 int omap_start_dma_chain_transfers(int chain_id)
1591 {
1592 int *channels;
1593 u32 l, i;
1594
1595 if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
1596 printk(KERN_ERR "Invalid chain id\n");
1597 return -EINVAL;
1598 }
1599
1600 channels = dma_linked_lch[chain_id].linked_dmach_q;
1601
1602 if (dma_linked_lch[channels[0]].chain_state == DMA_CHAIN_STARTED) {
1603 printk(KERN_ERR "Chain is already started\n");
1604 return -EBUSY;
1605 }
1606
1607 if (dma_linked_lch[chain_id].chain_mode == OMAP_DMA_STATIC_CHAIN) {
1608 for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked;
1609 i++) {
1610 enable_lnk(channels[i]);
1611 omap_enable_channel_irq(channels[i]);
1612 }
1613 } else {
1614 omap_enable_channel_irq(channels[0]);
1615 }
1616
1617 l = dma_read(CCR(channels[0]));
1618 l |= (1 << 7);
1619 dma_linked_lch[chain_id].chain_state = DMA_CHAIN_STARTED;
1620 dma_chan[channels[0]].state = DMA_CH_STARTED;
1621
1622 if ((0 == (l & (1 << 24))))
1623 l &= ~(1 << 25);
1624 else
1625 l |= (1 << 25);
1626 dma_write(l, CCR(channels[0]));
1627
1628 dma_chan[channels[0]].flags |= OMAP_DMA_ACTIVE;
1629
1630 return 0;
1631 }
1632 EXPORT_SYMBOL(omap_start_dma_chain_transfers);
1633
1634 /**
1635 * @brief omap_stop_dma_chain_transfers - Stop the dma transfer of a chain.
1636 *
1637 * @param chain_id
1638 *
1639 * @return - Success : 0
1640 * Failure : EINVAL
1641 */
1642 int omap_stop_dma_chain_transfers(int chain_id)
1643 {
1644 int *channels;
1645 u32 l, i;
1646 u32 sys_cf;
1647
1648 /* Check for input params */
1649 if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
1650 printk(KERN_ERR "Invalid chain id\n");
1651 return -EINVAL;
1652 }
1653
1654 /* Check if the chain exists */
1655 if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
1656 printk(KERN_ERR "Chain doesn't exists\n");
1657 return -EINVAL;
1658 }
1659 channels = dma_linked_lch[chain_id].linked_dmach_q;
1660
1661 /*
1662 * DMA Errata:
1663 * Special programming model needed to disable DMA before end of block
1664 */
1665 sys_cf = dma_read(OCP_SYSCONFIG);
1666 l = sys_cf;
1667 /* Middle mode reg set no Standby */
1668 l &= ~((1 << 12)|(1 << 13));
1669 dma_write(l, OCP_SYSCONFIG);
1670
1671 for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {
1672
1673 /* Stop the Channel transmission */
1674 l = dma_read(CCR(channels[i]));
1675 l &= ~(1 << 7);
1676 dma_write(l, CCR(channels[i]));
1677
1678 /* Disable the link in all the channels */
1679 disable_lnk(channels[i]);
1680 dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;
1681
1682 }
1683 dma_linked_lch[chain_id].chain_state = DMA_CHAIN_NOTSTARTED;
1684
1685 /* Reset the Queue pointers */
1686 OMAP_DMA_CHAIN_QINIT(chain_id);
1687
1688 /* Errata - put in the old value */
1689 dma_write(sys_cf, OCP_SYSCONFIG);
1690
1691 return 0;
1692 }
1693 EXPORT_SYMBOL(omap_stop_dma_chain_transfers);
1694
1695 /* Get the index of the ongoing DMA in chain */
1696 /**
1697 * @brief omap_get_dma_chain_index - Get the element and frame index
1698 * of the ongoing DMA in chain
1699 *
1700 * @param chain_id
1701 * @param ei - Element index
1702 * @param fi - Frame index
1703 *
1704 * @return - Success : 0
1705 * Failure : -EINVAL
1706 */
1707 int omap_get_dma_chain_index(int chain_id, int *ei, int *fi)
1708 {
1709 int lch;
1710 int *channels;
1711
1712 /* Check for input params */
1713 if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
1714 printk(KERN_ERR "Invalid chain id\n");
1715 return -EINVAL;
1716 }
1717
1718 /* Check if the chain exists */
1719 if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
1720 printk(KERN_ERR "Chain doesn't exists\n");
1721 return -EINVAL;
1722 }
1723 if ((!ei) || (!fi))
1724 return -EINVAL;
1725
1726 channels = dma_linked_lch[chain_id].linked_dmach_q;
1727
1728 /* Get the current channel */
1729 lch = channels[dma_linked_lch[chain_id].q_head];
1730
1731 *ei = dma_read(CCEN(lch));
1732 *fi = dma_read(CCFN(lch));
1733
1734 return 0;
1735 }
1736 EXPORT_SYMBOL(omap_get_dma_chain_index);
1737
1738 /**
1739 * @brief omap_get_dma_chain_dst_pos - Get the destination position of the
1740 * ongoing DMA in chain
1741 *
1742 * @param chain_id
1743 *
1744 * @return - Success : Destination position
1745 * Failure : -EINVAL
1746 */
1747 int omap_get_dma_chain_dst_pos(int chain_id)
1748 {
1749 int lch;
1750 int *channels;
1751
1752 /* Check for input params */
1753 if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
1754 printk(KERN_ERR "Invalid chain id\n");
1755 return -EINVAL;
1756 }
1757
1758 /* Check if the chain exists */
1759 if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
1760 printk(KERN_ERR "Chain doesn't exists\n");
1761 return -EINVAL;
1762 }
1763
1764 channels = dma_linked_lch[chain_id].linked_dmach_q;
1765
1766 /* Get the current channel */
1767 lch = channels[dma_linked_lch[chain_id].q_head];
1768
1769 return dma_read(CDAC(lch));
1770 }
1771 EXPORT_SYMBOL(omap_get_dma_chain_dst_pos);
1772
1773 /**
1774 * @brief omap_get_dma_chain_src_pos - Get the source position
1775 * of the ongoing DMA in chain
1776 * @param chain_id
1777 *
1778 * @return - Success : Destination position
1779 * Failure : -EINVAL
1780 */
1781 int omap_get_dma_chain_src_pos(int chain_id)
1782 {
1783 int lch;
1784 int *channels;
1785
1786 /* Check for input params */
1787 if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
1788 printk(KERN_ERR "Invalid chain id\n");
1789 return -EINVAL;
1790 }
1791
1792 /* Check if the chain exists */
1793 if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
1794 printk(KERN_ERR "Chain doesn't exists\n");
1795 return -EINVAL;
1796 }
1797
1798 channels = dma_linked_lch[chain_id].linked_dmach_q;
1799
1800 /* Get the current channel */
1801 lch = channels[dma_linked_lch[chain_id].q_head];
1802
1803 return dma_read(CSAC(lch));
1804 }
1805 EXPORT_SYMBOL(omap_get_dma_chain_src_pos);
1806 #endif /* ifndef CONFIG_ARCH_OMAP1 */
1807
1808 /*----------------------------------------------------------------------------*/
1809
1810 #ifdef CONFIG_ARCH_OMAP1
1811
1812 static int omap1_dma_handle_ch(int ch)
1813 {
1814 u32 csr;
1815
1816 if (enable_1510_mode && ch >= 6) {
1817 csr = dma_chan[ch].saved_csr;
1818 dma_chan[ch].saved_csr = 0;
1819 } else
1820 csr = dma_read(CSR(ch));
1821 if (enable_1510_mode && ch <= 2 && (csr >> 7) != 0) {
1822 dma_chan[ch + 6].saved_csr = csr >> 7;
1823 csr &= 0x7f;
1824 }
1825 if ((csr & 0x3f) == 0)
1826 return 0;
1827 if (unlikely(dma_chan[ch].dev_id == -1)) {
1828 printk(KERN_WARNING "Spurious interrupt from DMA channel "
1829 "%d (CSR %04x)\n", ch, csr);
1830 return 0;
1831 }
1832 if (unlikely(csr & OMAP1_DMA_TOUT_IRQ))
1833 printk(KERN_WARNING "DMA timeout with device %d\n",
1834 dma_chan[ch].dev_id);
1835 if (unlikely(csr & OMAP_DMA_DROP_IRQ))
1836 printk(KERN_WARNING "DMA synchronization event drop occurred "
1837 "with device %d\n", dma_chan[ch].dev_id);
1838 if (likely(csr & OMAP_DMA_BLOCK_IRQ))
1839 dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
1840 if (likely(dma_chan[ch].callback != NULL))
1841 dma_chan[ch].callback(ch, csr, dma_chan[ch].data);
1842
1843 return 1;
1844 }
1845
1846 static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
1847 {
1848 int ch = ((int) dev_id) - 1;
1849 int handled = 0;
1850
1851 for (;;) {
1852 int handled_now = 0;
1853
1854 handled_now += omap1_dma_handle_ch(ch);
1855 if (enable_1510_mode && dma_chan[ch + 6].saved_csr)
1856 handled_now += omap1_dma_handle_ch(ch + 6);
1857 if (!handled_now)
1858 break;
1859 handled += handled_now;
1860 }
1861
1862 return handled ? IRQ_HANDLED : IRQ_NONE;
1863 }
1864
1865 #else
1866 #define omap1_dma_irq_handler NULL
1867 #endif
1868
1869 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
1870 defined(CONFIG_ARCH_OMAP4)
1871
1872 static int omap2_dma_handle_ch(int ch)
1873 {
1874 u32 status = dma_read(CSR(ch));
1875
1876 if (!status) {
1877 if (printk_ratelimit())
1878 printk(KERN_WARNING "Spurious DMA IRQ for lch %d\n",
1879 ch);
1880 dma_write(1 << ch, IRQSTATUS_L0);
1881 return 0;
1882 }
1883 if (unlikely(dma_chan[ch].dev_id == -1)) {
1884 if (printk_ratelimit())
1885 printk(KERN_WARNING "IRQ %04x for non-allocated DMA"
1886 "channel %d\n", status, ch);
1887 return 0;
1888 }
1889 if (unlikely(status & OMAP_DMA_DROP_IRQ))
1890 printk(KERN_INFO
1891 "DMA synchronization event drop occurred with device "
1892 "%d\n", dma_chan[ch].dev_id);
1893 if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ)) {
1894 printk(KERN_INFO "DMA transaction error with device %d\n",
1895 dma_chan[ch].dev_id);
1896 if (cpu_class_is_omap2()) {
1897 /* Errata: sDMA Channel is not disabled
1898 * after a transaction error. So we explicitely
1899 * disable the channel
1900 */
1901 u32 ccr;
1902
1903 ccr = dma_read(CCR(ch));
1904 ccr &= ~OMAP_DMA_CCR_EN;
1905 dma_write(ccr, CCR(ch));
1906 dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
1907 }
1908 }
1909 if (unlikely(status & OMAP2_DMA_SECURE_ERR_IRQ))
1910 printk(KERN_INFO "DMA secure error with device %d\n",
1911 dma_chan[ch].dev_id);
1912 if (unlikely(status & OMAP2_DMA_MISALIGNED_ERR_IRQ))
1913 printk(KERN_INFO "DMA misaligned error with device %d\n",
1914 dma_chan[ch].dev_id);
1915
1916 dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(ch));
1917 dma_write(1 << ch, IRQSTATUS_L0);
1918
1919 /* If the ch is not chained then chain_id will be -1 */
1920 if (dma_chan[ch].chain_id != -1) {
1921 int chain_id = dma_chan[ch].chain_id;
1922 dma_chan[ch].state = DMA_CH_NOTSTARTED;
1923 if (dma_read(CLNK_CTRL(ch)) & (1 << 15))
1924 dma_chan[dma_chan[ch].next_linked_ch].state =
1925 DMA_CH_STARTED;
1926 if (dma_linked_lch[chain_id].chain_mode ==
1927 OMAP_DMA_DYNAMIC_CHAIN)
1928 disable_lnk(ch);
1929
1930 if (!OMAP_DMA_CHAIN_QEMPTY(chain_id))
1931 OMAP_DMA_CHAIN_INCQHEAD(chain_id);
1932
1933 status = dma_read(CSR(ch));
1934 }
1935
1936 dma_write(status, CSR(ch));
1937
1938 if (likely(dma_chan[ch].callback != NULL))
1939 dma_chan[ch].callback(ch, status, dma_chan[ch].data);
1940
1941 return 0;
1942 }
1943
1944 /* STATUS register count is from 1-32 while our is 0-31 */
1945 static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id)
1946 {
1947 u32 val, enable_reg;
1948 int i;
1949
1950 val = dma_read(IRQSTATUS_L0);
1951 if (val == 0) {
1952 if (printk_ratelimit())
1953 printk(KERN_WARNING "Spurious DMA IRQ\n");
1954 return IRQ_HANDLED;
1955 }
1956 enable_reg = dma_read(IRQENABLE_L0);
1957 val &= enable_reg; /* Dispatch only relevant interrupts */
1958 for (i = 0; i < dma_lch_count && val != 0; i++) {
1959 if (val & 1)
1960 omap2_dma_handle_ch(i);
1961 val >>= 1;
1962 }
1963
1964 return IRQ_HANDLED;
1965 }
1966
1967 static struct irqaction omap24xx_dma_irq = {
1968 .name = "DMA",
1969 .handler = omap2_dma_irq_handler,
1970 .flags = IRQF_DISABLED
1971 };
1972
1973 #else
1974 static struct irqaction omap24xx_dma_irq;
1975 #endif
1976
1977 /*----------------------------------------------------------------------------*/
1978
1979 static struct lcd_dma_info {
1980 spinlock_t lock;
1981 int reserved;
1982 void (*callback)(u16 status, void *data);
1983 void *cb_data;
1984
1985 int active;
1986 unsigned long addr, size;
1987 int rotate, data_type, xres, yres;
1988 int vxres;
1989 int mirror;
1990 int xscale, yscale;
1991 int ext_ctrl;
1992 int src_port;
1993 int single_transfer;
1994 } lcd_dma;
1995
1996 void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
1997 int data_type)
1998 {
1999 lcd_dma.addr = addr;
2000 lcd_dma.data_type = data_type;
2001 lcd_dma.xres = fb_xres;
2002 lcd_dma.yres = fb_yres;
2003 }
2004 EXPORT_SYMBOL(omap_set_lcd_dma_b1);
2005
2006 void omap_set_lcd_dma_src_port(int port)
2007 {
2008 lcd_dma.src_port = port;
2009 }
2010
2011 void omap_set_lcd_dma_ext_controller(int external)
2012 {
2013 lcd_dma.ext_ctrl = external;
2014 }
2015 EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller);
2016
2017 void omap_set_lcd_dma_single_transfer(int single)
2018 {
2019 lcd_dma.single_transfer = single;
2020 }
2021 EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
2022
2023 void omap_set_lcd_dma_b1_rotation(int rotate)
2024 {
2025 if (omap_dma_in_1510_mode()) {
2026 printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n");
2027 BUG();
2028 return;
2029 }
2030 lcd_dma.rotate = rotate;
2031 }
2032 EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation);
2033
2034 void omap_set_lcd_dma_b1_mirror(int mirror)
2035 {
2036 if (omap_dma_in_1510_mode()) {
2037 printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n");
2038 BUG();
2039 }
2040 lcd_dma.mirror = mirror;
2041 }
2042 EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
2043
2044 void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
2045 {
2046 if (omap_dma_in_1510_mode()) {
2047 printk(KERN_ERR "DMA virtual resulotion is not supported "
2048 "in 1510 mode\n");
2049 BUG();
2050 }
2051 lcd_dma.vxres = vxres;
2052 }
2053 EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres);
2054
2055 void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale)
2056 {
2057 if (omap_dma_in_1510_mode()) {
2058 printk(KERN_ERR "DMA scale is not supported in 1510 mode\n");
2059 BUG();
2060 }
2061 lcd_dma.xscale = xscale;
2062 lcd_dma.yscale = yscale;
2063 }
2064 EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale);
2065
2066 static void set_b1_regs(void)
2067 {
2068 unsigned long top, bottom;
2069 int es;
2070 u16 w;
2071 unsigned long en, fn;
2072 long ei, fi;
2073 unsigned long vxres;
2074 unsigned int xscale, yscale;
2075
2076 switch (lcd_dma.data_type) {
2077 case OMAP_DMA_DATA_TYPE_S8:
2078 es = 1;
2079 break;
2080 case OMAP_DMA_DATA_TYPE_S16:
2081 es = 2;
2082 break;
2083 case OMAP_DMA_DATA_TYPE_S32:
2084 es = 4;
2085 break;
2086 default:
2087 BUG();
2088 return;
2089 }
2090
2091 vxres = lcd_dma.vxres ? lcd_dma.vxres : lcd_dma.xres;
2092 xscale = lcd_dma.xscale ? lcd_dma.xscale : 1;
2093 yscale = lcd_dma.yscale ? lcd_dma.yscale : 1;
2094 BUG_ON(vxres < lcd_dma.xres);
2095
2096 #define PIXADDR(x, y) (lcd_dma.addr + \
2097 ((y) * vxres * yscale + (x) * xscale) * es)
2098 #define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1)
2099
2100 switch (lcd_dma.rotate) {
2101 case 0:
2102 if (!lcd_dma.mirror) {
2103 top = PIXADDR(0, 0);
2104 bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
2105 /* 1510 DMA requires the bottom address to be 2 more
2106 * than the actual last memory access location. */
2107 if (omap_dma_in_1510_mode() &&
2108 lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32)
2109 bottom += 2;
2110 ei = PIXSTEP(0, 0, 1, 0);
2111 fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1);
2112 } else {
2113 top = PIXADDR(lcd_dma.xres - 1, 0);
2114 bottom = PIXADDR(0, lcd_dma.yres - 1);
2115 ei = PIXSTEP(1, 0, 0, 0);
2116 fi = PIXSTEP(0, 0, lcd_dma.xres - 1, 1);
2117 }
2118 en = lcd_dma.xres;
2119 fn = lcd_dma.yres;
2120 break;
2121 case 90:
2122 if (!lcd_dma.mirror) {
2123 top = PIXADDR(0, lcd_dma.yres - 1);
2124 bottom = PIXADDR(lcd_dma.xres - 1, 0);
2125 ei = PIXSTEP(0, 1, 0, 0);
2126 fi = PIXSTEP(0, 0, 1, lcd_dma.yres - 1);
2127 } else {
2128 top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
2129 bottom = PIXADDR(0, 0);
2130 ei = PIXSTEP(0, 1, 0, 0);
2131 fi = PIXSTEP(1, 0, 0, lcd_dma.yres - 1);
2132 }
2133 en = lcd_dma.yres;
2134 fn = lcd_dma.xres;
2135 break;
2136 case 180:
2137 if (!lcd_dma.mirror) {
2138 top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
2139 bottom = PIXADDR(0, 0);
2140 ei = PIXSTEP(1, 0, 0, 0);
2141 fi = PIXSTEP(0, 1, lcd_dma.xres - 1, 0);
2142 } else {
2143 top = PIXADDR(0, lcd_dma.yres - 1);
2144 bottom = PIXADDR(lcd_dma.xres - 1, 0);
2145 ei = PIXSTEP(0, 0, 1, 0);
2146 fi = PIXSTEP(lcd_dma.xres - 1, 1, 0, 0);
2147 }
2148 en = lcd_dma.xres;
2149 fn = lcd_dma.yres;
2150 break;
2151 case 270:
2152 if (!lcd_dma.mirror) {
2153 top = PIXADDR(lcd_dma.xres - 1, 0);
2154 bottom = PIXADDR(0, lcd_dma.yres - 1);
2155 ei = PIXSTEP(0, 0, 0, 1);
2156 fi = PIXSTEP(1, lcd_dma.yres - 1, 0, 0);
2157 } else {
2158 top = PIXADDR(0, 0);
2159 bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
2160 ei = PIXSTEP(0, 0, 0, 1);
2161 fi = PIXSTEP(0, lcd_dma.yres - 1, 1, 0);
2162 }
2163 en = lcd_dma.yres;
2164 fn = lcd_dma.xres;
2165 break;
2166 default:
2167 BUG();
2168 return; /* Suppress warning about uninitialized vars */
2169 }
2170
2171 if (omap_dma_in_1510_mode()) {
2172 omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U);
2173 omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L);
2174 omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U);
2175 omap_writew(bottom, OMAP1510_DMA_LCD_BOT_F1_L);
2176
2177 return;
2178 }
2179
2180 /* 1610 regs */
2181 omap_writew(top >> 16, OMAP1610_DMA_LCD_TOP_B1_U);
2182 omap_writew(top, OMAP1610_DMA_LCD_TOP_B1_L);
2183 omap_writew(bottom >> 16, OMAP1610_DMA_LCD_BOT_B1_U);
2184 omap_writew(bottom, OMAP1610_DMA_LCD_BOT_B1_L);
2185
2186 omap_writew(en, OMAP1610_DMA_LCD_SRC_EN_B1);
2187 omap_writew(fn, OMAP1610_DMA_LCD_SRC_FN_B1);
2188
2189 w = omap_readw(OMAP1610_DMA_LCD_CSDP);
2190 w &= ~0x03;
2191 w |= lcd_dma.data_type;
2192 omap_writew(w, OMAP1610_DMA_LCD_CSDP);
2193
2194 w = omap_readw(OMAP1610_DMA_LCD_CTRL);
2195 /* Always set the source port as SDRAM for now*/
2196 w &= ~(0x03 << 6);
2197 if (lcd_dma.callback != NULL)
2198 w |= 1 << 1; /* Block interrupt enable */
2199 else
2200 w &= ~(1 << 1);
2201 omap_writew(w, OMAP1610_DMA_LCD_CTRL);
2202
2203 if (!(lcd_dma.rotate || lcd_dma.mirror ||
2204 lcd_dma.vxres || lcd_dma.xscale || lcd_dma.yscale))
2205 return;
2206
2207 w = omap_readw(OMAP1610_DMA_LCD_CCR);
2208 /* Set the double-indexed addressing mode */
2209 w |= (0x03 << 12);
2210 omap_writew(w, OMAP1610_DMA_LCD_CCR);
2211
2212 omap_writew(ei, OMAP1610_DMA_LCD_SRC_EI_B1);
2213 omap_writew(fi >> 16, OMAP1610_DMA_LCD_SRC_FI_B1_U);
2214 omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L);
2215 }
2216
2217 static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id)
2218 {
2219 u16 w;
2220
2221 w = omap_readw(OMAP1610_DMA_LCD_CTRL);
2222 if (unlikely(!(w & (1 << 3)))) {
2223 printk(KERN_WARNING "Spurious LCD DMA IRQ\n");
2224 return IRQ_NONE;
2225 }
2226 /* Ack the IRQ */
2227 w |= (1 << 3);
2228 omap_writew(w, OMAP1610_DMA_LCD_CTRL);
2229 lcd_dma.active = 0;
2230 if (lcd_dma.callback != NULL)
2231 lcd_dma.callback(w, lcd_dma.cb_data);
2232
2233 return IRQ_HANDLED;
2234 }
2235
2236 int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
2237 void *data)
2238 {
2239 spin_lock_irq(&lcd_dma.lock);
2240 if (lcd_dma.reserved) {
2241 spin_unlock_irq(&lcd_dma.lock);
2242 printk(KERN_ERR "LCD DMA channel already reserved\n");
2243 BUG();
2244 return -EBUSY;
2245 }
2246 lcd_dma.reserved = 1;
2247 spin_unlock_irq(&lcd_dma.lock);
2248 lcd_dma.callback = callback;
2249 lcd_dma.cb_data = data;
2250 lcd_dma.active = 0;
2251 lcd_dma.single_transfer = 0;
2252 lcd_dma.rotate = 0;
2253 lcd_dma.vxres = 0;
2254 lcd_dma.mirror = 0;
2255 lcd_dma.xscale = 0;
2256 lcd_dma.yscale = 0;
2257 lcd_dma.ext_ctrl = 0;
2258 lcd_dma.src_port = 0;
2259
2260 return 0;
2261 }
2262 EXPORT_SYMBOL(omap_request_lcd_dma);
2263
2264 void omap_free_lcd_dma(void)
2265 {
2266 spin_lock(&lcd_dma.lock);
2267 if (!lcd_dma.reserved) {
2268 spin_unlock(&lcd_dma.lock);
2269 printk(KERN_ERR "LCD DMA is not reserved\n");
2270 BUG();
2271 return;
2272 }
2273 if (!enable_1510_mode)
2274 omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1,
2275 OMAP1610_DMA_LCD_CCR);
2276 lcd_dma.reserved = 0;
2277 spin_unlock(&lcd_dma.lock);
2278 }
2279 EXPORT_SYMBOL(omap_free_lcd_dma);
2280
2281 void omap_enable_lcd_dma(void)
2282 {
2283 u16 w;
2284
2285 /*
2286 * Set the Enable bit only if an external controller is
2287 * connected. Otherwise the OMAP internal controller will
2288 * start the transfer when it gets enabled.
2289 */
2290 if (enable_1510_mode || !lcd_dma.ext_ctrl)
2291 return;
2292
2293 w = omap_readw(OMAP1610_DMA_LCD_CTRL);
2294 w |= 1 << 8;
2295 omap_writew(w, OMAP1610_DMA_LCD_CTRL);
2296
2297 lcd_dma.active = 1;
2298
2299 w = omap_readw(OMAP1610_DMA_LCD_CCR);
2300 w |= 1 << 7;
2301 omap_writew(w, OMAP1610_DMA_LCD_CCR);
2302 }
2303 EXPORT_SYMBOL(omap_enable_lcd_dma);
2304
2305 void omap_setup_lcd_dma(void)
2306 {
2307 BUG_ON(lcd_dma.active);
2308 if (!enable_1510_mode) {
2309 /* Set some reasonable defaults */
2310 omap_writew(0x5440, OMAP1610_DMA_LCD_CCR);
2311 omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP);
2312 omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL);
2313 }
2314 set_b1_regs();
2315 if (!enable_1510_mode) {
2316 u16 w;
2317
2318 w = omap_readw(OMAP1610_DMA_LCD_CCR);
2319 /*
2320 * If DMA was already active set the end_prog bit to have
2321 * the programmed register set loaded into the active
2322 * register set.
2323 */
2324 w |= 1 << 11; /* End_prog */
2325 if (!lcd_dma.single_transfer)
2326 w |= (3 << 8); /* Auto_init, repeat */
2327 omap_writew(w, OMAP1610_DMA_LCD_CCR);
2328 }
2329 }
2330 EXPORT_SYMBOL(omap_setup_lcd_dma);
2331
2332 void omap_stop_lcd_dma(void)
2333 {
2334 u16 w;
2335
2336 lcd_dma.active = 0;
2337 if (enable_1510_mode || !lcd_dma.ext_ctrl)
2338 return;
2339
2340 w = omap_readw(OMAP1610_DMA_LCD_CCR);
2341 w &= ~(1 << 7);
2342 omap_writew(w, OMAP1610_DMA_LCD_CCR);
2343
2344 w = omap_readw(OMAP1610_DMA_LCD_CTRL);
2345 w &= ~(1 << 8);
2346 omap_writew(w, OMAP1610_DMA_LCD_CTRL);
2347 }
2348 EXPORT_SYMBOL(omap_stop_lcd_dma);
2349
2350 void omap_dma_global_context_save(void)
2351 {
2352 omap_dma_global_context.dma_irqenable_l0 =
2353 dma_read(IRQENABLE_L0);
2354 omap_dma_global_context.dma_ocp_sysconfig =
2355 dma_read(OCP_SYSCONFIG);
2356 omap_dma_global_context.dma_gcr = dma_read(GCR);
2357 }
2358
2359 void omap_dma_global_context_restore(void)
2360 {
2361 int ch;
2362
2363 dma_write(omap_dma_global_context.dma_gcr, GCR);
2364 dma_write(omap_dma_global_context.dma_ocp_sysconfig,
2365 OCP_SYSCONFIG);
2366 dma_write(omap_dma_global_context.dma_irqenable_l0,
2367 IRQENABLE_L0);
2368
2369 /*
2370 * A bug in ROM code leaves IRQ status for channels 0 and 1 uncleared
2371 * after secure sram context save and restore. Hence we need to
2372 * manually clear those IRQs to avoid spurious interrupts. This
2373 * affects only secure devices.
2374 */
2375 if (cpu_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
2376 dma_write(0x3 , IRQSTATUS_L0);
2377
2378 for (ch = 0; ch < dma_chan_count; ch++)
2379 if (dma_chan[ch].dev_id != -1)
2380 omap_clear_dma(ch);
2381 }
2382
2383 /*----------------------------------------------------------------------------*/
2384
2385 static int __init omap_init_dma(void)
2386 {
2387 unsigned long base;
2388 int ch, r;
2389
2390 if (cpu_class_is_omap1()) {
2391 base = OMAP1_DMA_BASE;
2392 dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT;
2393 } else if (cpu_is_omap24xx()) {
2394 base = OMAP24XX_DMA4_BASE;
2395 dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
2396 } else if (cpu_is_omap34xx()) {
2397 base = OMAP34XX_DMA4_BASE;
2398 dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
2399 } else if (cpu_is_omap44xx()) {
2400 base = OMAP44XX_DMA4_BASE;
2401 dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
2402 } else {
2403 pr_err("DMA init failed for unsupported omap\n");
2404 return -ENODEV;
2405 }
2406
2407 omap_dma_base = ioremap(base, SZ_4K);
2408 BUG_ON(!omap_dma_base);
2409
2410 if (cpu_class_is_omap2() && omap_dma_reserve_channels
2411 && (omap_dma_reserve_channels <= dma_lch_count))
2412 dma_lch_count = omap_dma_reserve_channels;
2413
2414 dma_chan = kzalloc(sizeof(struct omap_dma_lch) * dma_lch_count,
2415 GFP_KERNEL);
2416 if (!dma_chan) {
2417 r = -ENOMEM;
2418 goto out_unmap;
2419 }
2420
2421 if (cpu_class_is_omap2()) {
2422 dma_linked_lch = kzalloc(sizeof(struct dma_link_info) *
2423 dma_lch_count, GFP_KERNEL);
2424 if (!dma_linked_lch) {
2425 r = -ENOMEM;
2426 goto out_free;
2427 }
2428 }
2429
2430 if (cpu_is_omap15xx()) {
2431 printk(KERN_INFO "DMA support for OMAP15xx initialized\n");
2432 dma_chan_count = 9;
2433 enable_1510_mode = 1;
2434 } else if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
2435 printk(KERN_INFO "OMAP DMA hardware version %d\n",
2436 dma_read(HW_ID));
2437 printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n",
2438 (dma_read(CAPS_0_U) << 16) |
2439 dma_read(CAPS_0_L),
2440 (dma_read(CAPS_1_U) << 16) |
2441 dma_read(CAPS_1_L),
2442 dma_read(CAPS_2), dma_read(CAPS_3),
2443 dma_read(CAPS_4));
2444 if (!enable_1510_mode) {
2445 u16 w;
2446
2447 /* Disable OMAP 3.0/3.1 compatibility mode. */
2448 w = dma_read(GSCR);
2449 w |= 1 << 3;
2450 dma_write(w, GSCR);
2451 dma_chan_count = 16;
2452 } else
2453 dma_chan_count = 9;
2454 if (cpu_is_omap16xx()) {
2455 u16 w;
2456
2457 /* this would prevent OMAP sleep */
2458 w = omap_readw(OMAP1610_DMA_LCD_CTRL);
2459 w &= ~(1 << 8);
2460 omap_writew(w, OMAP1610_DMA_LCD_CTRL);
2461 }
2462 } else if (cpu_class_is_omap2()) {
2463 u8 revision = dma_read(REVISION) & 0xff;
2464 printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
2465 revision >> 4, revision & 0xf);
2466 dma_chan_count = dma_lch_count;
2467 } else {
2468 dma_chan_count = 0;
2469 return 0;
2470 }
2471
2472 spin_lock_init(&lcd_dma.lock);
2473 spin_lock_init(&dma_chan_lock);
2474
2475 for (ch = 0; ch < dma_chan_count; ch++) {
2476 omap_clear_dma(ch);
2477 dma_chan[ch].dev_id = -1;
2478 dma_chan[ch].next_lch = -1;
2479
2480 if (ch >= 6 && enable_1510_mode)
2481 continue;
2482
2483 if (cpu_class_is_omap1()) {
2484 /*
2485 * request_irq() doesn't like dev_id (ie. ch) being
2486 * zero, so we have to kludge around this.
2487 */
2488 r = request_irq(omap1_dma_irq[ch],
2489 omap1_dma_irq_handler, 0, "DMA",
2490 (void *) (ch + 1));
2491 if (r != 0) {
2492 int i;
2493
2494 printk(KERN_ERR "unable to request IRQ %d "
2495 "for DMA (error %d)\n",
2496 omap1_dma_irq[ch], r);
2497 for (i = 0; i < ch; i++)
2498 free_irq(omap1_dma_irq[i],
2499 (void *) (i + 1));
2500 goto out_free;
2501 }
2502 }
2503 }
2504
2505 if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx())
2506 omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE,
2507 DMA_DEFAULT_FIFO_DEPTH, 0);
2508
2509 if (cpu_class_is_omap2()) {
2510 int irq;
2511 if (cpu_is_omap44xx())
2512 irq = INT_44XX_SDMA_IRQ0;
2513 else
2514 irq = INT_24XX_SDMA_IRQ0;
2515 setup_irq(irq, &omap24xx_dma_irq);
2516 }
2517
2518 if (cpu_is_omap34xx()) {
2519 /* Enable smartidle idlemodes and autoidle */
2520 u32 v = dma_read(OCP_SYSCONFIG);
2521 v &= ~(DMA_SYSCONFIG_MIDLEMODE_MASK |
2522 DMA_SYSCONFIG_SIDLEMODE_MASK |
2523 DMA_SYSCONFIG_AUTOIDLE);
2524 v |= (DMA_SYSCONFIG_MIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
2525 DMA_SYSCONFIG_SIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
2526 DMA_SYSCONFIG_AUTOIDLE);
2527 dma_write(v , OCP_SYSCONFIG);
2528 /* reserve dma channels 0 and 1 in high security devices */
2529 if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
2530 printk(KERN_INFO "Reserving DMA channels 0 and 1 for "
2531 "HS ROM code\n");
2532 dma_chan[0].dev_id = 0;
2533 dma_chan[1].dev_id = 1;
2534 }
2535 }
2536
2537
2538 /* FIXME: Update LCD DMA to work on 24xx */
2539 if (cpu_class_is_omap1()) {
2540 r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
2541 "LCD DMA", NULL);
2542 if (r != 0) {
2543 int i;
2544
2545 printk(KERN_ERR "unable to request IRQ for LCD DMA "
2546 "(error %d)\n", r);
2547 for (i = 0; i < dma_chan_count; i++)
2548 free_irq(omap1_dma_irq[i], (void *) (i + 1));
2549 goto out_free;
2550 }
2551 }
2552
2553 return 0;
2554
2555 out_free:
2556 kfree(dma_chan);
2557
2558 out_unmap:
2559 iounmap(omap_dma_base);
2560
2561 return r;
2562 }
2563
2564 arch_initcall(omap_init_dma);
2565
2566 /*
2567 * Reserve the omap SDMA channels using cmdline bootarg
2568 * "omap_dma_reserve_ch=". The valid range is 1 to 32
2569 */
2570 static int __init omap_dma_cmdline_reserve_ch(char *str)
2571 {
2572 if (get_option(&str, &omap_dma_reserve_channels) != 1)
2573 omap_dma_reserve_channels = 0;
2574 return 1;
2575 }
2576
2577 __setup("omap_dma_reserve_ch=", omap_dma_cmdline_reserve_ch);
2578
2579
Linux for Ginger Game Console