OMAP3 SRF: Generic shared resource f/w
[linux-ginger.git] / arch / arm / mach-ep93xx / clock.c
blob1d0f9d8aff2e93583ba5ff0793f80d0f991f4786
1 /*
2 * arch/arm/mach-ep93xx/clock.c
3 * Clock control for Cirrus EP93xx chips.
5 * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or (at
10 * your option) any later version.
13 #include <linux/kernel.h>
14 #include <linux/clk.h>
15 #include <linux/err.h>
16 #include <linux/module.h>
17 #include <linux/string.h>
18 #include <linux/io.h>
19 #include <linux/spinlock.h>
21 #include <mach/hardware.h>
23 #include <asm/clkdev.h>
24 #include <asm/div64.h>
27 struct clk {
28 struct clk *parent;
29 unsigned long rate;
30 int users;
31 int sw_locked;
32 void __iomem *enable_reg;
33 u32 enable_mask;
35 unsigned long (*get_rate)(struct clk *clk);
36 int (*set_rate)(struct clk *clk, unsigned long rate);
40 static unsigned long get_uart_rate(struct clk *clk);
42 static int set_keytchclk_rate(struct clk *clk, unsigned long rate);
43 static int set_div_rate(struct clk *clk, unsigned long rate);
46 static struct clk clk_xtali = {
47 .rate = EP93XX_EXT_CLK_RATE,
49 static struct clk clk_uart1 = {
50 .parent = &clk_xtali,
51 .sw_locked = 1,
52 .enable_reg = EP93XX_SYSCON_DEVCFG,
53 .enable_mask = EP93XX_SYSCON_DEVCFG_U1EN,
54 .get_rate = get_uart_rate,
56 static struct clk clk_uart2 = {
57 .parent = &clk_xtali,
58 .sw_locked = 1,
59 .enable_reg = EP93XX_SYSCON_DEVCFG,
60 .enable_mask = EP93XX_SYSCON_DEVCFG_U2EN,
61 .get_rate = get_uart_rate,
63 static struct clk clk_uart3 = {
64 .parent = &clk_xtali,
65 .sw_locked = 1,
66 .enable_reg = EP93XX_SYSCON_DEVCFG,
67 .enable_mask = EP93XX_SYSCON_DEVCFG_U3EN,
68 .get_rate = get_uart_rate,
70 static struct clk clk_pll1 = {
71 .parent = &clk_xtali,
73 static struct clk clk_f = {
74 .parent = &clk_pll1,
76 static struct clk clk_h = {
77 .parent = &clk_pll1,
79 static struct clk clk_p = {
80 .parent = &clk_pll1,
82 static struct clk clk_pll2 = {
83 .parent = &clk_xtali,
85 static struct clk clk_usb_host = {
86 .parent = &clk_pll2,
87 .enable_reg = EP93XX_SYSCON_PWRCNT,
88 .enable_mask = EP93XX_SYSCON_PWRCNT_USH_EN,
90 static struct clk clk_keypad = {
91 .parent = &clk_xtali,
92 .sw_locked = 1,
93 .enable_reg = EP93XX_SYSCON_KEYTCHCLKDIV,
94 .enable_mask = EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
95 .set_rate = set_keytchclk_rate,
97 static struct clk clk_pwm = {
98 .parent = &clk_xtali,
99 .rate = EP93XX_EXT_CLK_RATE,
102 static struct clk clk_video = {
103 .sw_locked = 1,
104 .enable_reg = EP93XX_SYSCON_VIDCLKDIV,
105 .enable_mask = EP93XX_SYSCON_CLKDIV_ENABLE,
106 .set_rate = set_div_rate,
109 /* DMA Clocks */
110 static struct clk clk_m2p0 = {
111 .parent = &clk_h,
112 .enable_reg = EP93XX_SYSCON_PWRCNT,
113 .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P0,
115 static struct clk clk_m2p1 = {
116 .parent = &clk_h,
117 .enable_reg = EP93XX_SYSCON_PWRCNT,
118 .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P1,
120 static struct clk clk_m2p2 = {
121 .parent = &clk_h,
122 .enable_reg = EP93XX_SYSCON_PWRCNT,
123 .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P2,
125 static struct clk clk_m2p3 = {
126 .parent = &clk_h,
127 .enable_reg = EP93XX_SYSCON_PWRCNT,
128 .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P3,
130 static struct clk clk_m2p4 = {
131 .parent = &clk_h,
132 .enable_reg = EP93XX_SYSCON_PWRCNT,
133 .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P4,
135 static struct clk clk_m2p5 = {
136 .parent = &clk_h,
137 .enable_reg = EP93XX_SYSCON_PWRCNT,
138 .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P5,
140 static struct clk clk_m2p6 = {
141 .parent = &clk_h,
142 .enable_reg = EP93XX_SYSCON_PWRCNT,
143 .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P6,
145 static struct clk clk_m2p7 = {
146 .parent = &clk_h,
147 .enable_reg = EP93XX_SYSCON_PWRCNT,
148 .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P7,
150 static struct clk clk_m2p8 = {
151 .parent = &clk_h,
152 .enable_reg = EP93XX_SYSCON_PWRCNT,
153 .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P8,
155 static struct clk clk_m2p9 = {
156 .parent = &clk_h,
157 .enable_reg = EP93XX_SYSCON_PWRCNT,
158 .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P9,
160 static struct clk clk_m2m0 = {
161 .parent = &clk_h,
162 .enable_reg = EP93XX_SYSCON_PWRCNT,
163 .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2M0,
165 static struct clk clk_m2m1 = {
166 .parent = &clk_h,
167 .enable_reg = EP93XX_SYSCON_PWRCNT,
168 .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2M1,
171 #define INIT_CK(dev,con,ck) \
172 { .dev_id = dev, .con_id = con, .clk = ck }
174 static struct clk_lookup clocks[] = {
175 INIT_CK(NULL, "xtali", &clk_xtali),
176 INIT_CK("apb:uart1", NULL, &clk_uart1),
177 INIT_CK("apb:uart2", NULL, &clk_uart2),
178 INIT_CK("apb:uart3", NULL, &clk_uart3),
179 INIT_CK(NULL, "pll1", &clk_pll1),
180 INIT_CK(NULL, "fclk", &clk_f),
181 INIT_CK(NULL, "hclk", &clk_h),
182 INIT_CK(NULL, "pclk", &clk_p),
183 INIT_CK(NULL, "pll2", &clk_pll2),
184 INIT_CK("ep93xx-ohci", NULL, &clk_usb_host),
185 INIT_CK("ep93xx-keypad", NULL, &clk_keypad),
186 INIT_CK("ep93xx-fb", NULL, &clk_video),
187 INIT_CK(NULL, "pwm_clk", &clk_pwm),
188 INIT_CK(NULL, "m2p0", &clk_m2p0),
189 INIT_CK(NULL, "m2p1", &clk_m2p1),
190 INIT_CK(NULL, "m2p2", &clk_m2p2),
191 INIT_CK(NULL, "m2p3", &clk_m2p3),
192 INIT_CK(NULL, "m2p4", &clk_m2p4),
193 INIT_CK(NULL, "m2p5", &clk_m2p5),
194 INIT_CK(NULL, "m2p6", &clk_m2p6),
195 INIT_CK(NULL, "m2p7", &clk_m2p7),
196 INIT_CK(NULL, "m2p8", &clk_m2p8),
197 INIT_CK(NULL, "m2p9", &clk_m2p9),
198 INIT_CK(NULL, "m2m0", &clk_m2m0),
199 INIT_CK(NULL, "m2m1", &clk_m2m1),
202 static DEFINE_SPINLOCK(clk_lock);
204 static void __clk_enable(struct clk *clk)
206 if (!clk->users++) {
207 if (clk->parent)
208 __clk_enable(clk->parent);
210 if (clk->enable_reg) {
211 u32 v;
213 v = __raw_readl(clk->enable_reg);
214 v |= clk->enable_mask;
215 if (clk->sw_locked)
216 ep93xx_syscon_swlocked_write(v, clk->enable_reg);
217 else
218 __raw_writel(v, clk->enable_reg);
223 int clk_enable(struct clk *clk)
225 unsigned long flags;
227 if (!clk)
228 return -EINVAL;
230 spin_lock_irqsave(&clk_lock, flags);
231 __clk_enable(clk);
232 spin_unlock_irqrestore(&clk_lock, flags);
234 return 0;
236 EXPORT_SYMBOL(clk_enable);
238 static void __clk_disable(struct clk *clk)
240 if (!--clk->users) {
241 if (clk->enable_reg) {
242 u32 v;
244 v = __raw_readl(clk->enable_reg);
245 v &= ~clk->enable_mask;
246 if (clk->sw_locked)
247 ep93xx_syscon_swlocked_write(v, clk->enable_reg);
248 else
249 __raw_writel(v, clk->enable_reg);
252 if (clk->parent)
253 __clk_disable(clk->parent);
257 void clk_disable(struct clk *clk)
259 unsigned long flags;
261 if (!clk)
262 return;
264 spin_lock_irqsave(&clk_lock, flags);
265 __clk_disable(clk);
266 spin_unlock_irqrestore(&clk_lock, flags);
268 EXPORT_SYMBOL(clk_disable);
270 static unsigned long get_uart_rate(struct clk *clk)
272 unsigned long rate = clk_get_rate(clk->parent);
273 u32 value;
275 value = __raw_readl(EP93XX_SYSCON_PWRCNT);
276 if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD)
277 return rate;
278 else
279 return rate / 2;
282 unsigned long clk_get_rate(struct clk *clk)
284 if (clk->get_rate)
285 return clk->get_rate(clk);
287 return clk->rate;
289 EXPORT_SYMBOL(clk_get_rate);
291 static int set_keytchclk_rate(struct clk *clk, unsigned long rate)
293 u32 val;
294 u32 div_bit;
296 val = __raw_readl(clk->enable_reg);
299 * The Key Matrix and ADC clocks are configured using the same
300 * System Controller register. The clock used will be either
301 * 1/4 or 1/16 the external clock rate depending on the
302 * EP93XX_SYSCON_KEYTCHCLKDIV_KDIV/EP93XX_SYSCON_KEYTCHCLKDIV_ADIV
303 * bit being set or cleared.
305 div_bit = clk->enable_mask >> 15;
307 if (rate == EP93XX_KEYTCHCLK_DIV4)
308 val |= div_bit;
309 else if (rate == EP93XX_KEYTCHCLK_DIV16)
310 val &= ~div_bit;
311 else
312 return -EINVAL;
314 ep93xx_syscon_swlocked_write(val, clk->enable_reg);
315 clk->rate = rate;
316 return 0;
319 static int calc_clk_div(struct clk *clk, unsigned long rate,
320 int *psel, int *esel, int *pdiv, int *div)
322 struct clk *mclk;
323 unsigned long max_rate, actual_rate, mclk_rate, rate_err = -1;
324 int i, found = 0, __div = 0, __pdiv = 0;
326 /* Don't exceed the maximum rate */
327 max_rate = max(max(clk_pll1.rate / 4, clk_pll2.rate / 4),
328 clk_xtali.rate / 4);
329 rate = min(rate, max_rate);
332 * Try the two pll's and the external clock
333 * Because the valid predividers are 2, 2.5 and 3, we multiply
334 * all the clocks by 2 to avoid floating point math.
336 * This is based on the algorithm in the ep93xx raster guide:
337 * http://be-a-maverick.com/en/pubs/appNote/AN269REV1.pdf
340 for (i = 0; i < 3; i++) {
341 if (i == 0)
342 mclk = &clk_xtali;
343 else if (i == 1)
344 mclk = &clk_pll1;
345 else
346 mclk = &clk_pll2;
347 mclk_rate = mclk->rate * 2;
349 /* Try each predivider value */
350 for (__pdiv = 4; __pdiv <= 6; __pdiv++) {
351 __div = mclk_rate / (rate * __pdiv);
352 if (__div < 2 || __div > 127)
353 continue;
355 actual_rate = mclk_rate / (__pdiv * __div);
357 if (!found || abs(actual_rate - rate) < rate_err) {
358 *pdiv = __pdiv - 3;
359 *div = __div;
360 *psel = (i == 2);
361 *esel = (i != 0);
362 clk->parent = mclk;
363 clk->rate = actual_rate;
364 rate_err = abs(actual_rate - rate);
365 found = 1;
370 if (!found)
371 return -EINVAL;
373 return 0;
376 static int set_div_rate(struct clk *clk, unsigned long rate)
378 int err, psel = 0, esel = 0, pdiv = 0, div = 0;
379 u32 val;
381 err = calc_clk_div(clk, rate, &psel, &esel, &pdiv, &div);
382 if (err)
383 return err;
385 /* Clear the esel, psel, pdiv and div bits */
386 val = __raw_readl(clk->enable_reg);
387 val &= ~0x7fff;
389 /* Set the new esel, psel, pdiv and div bits for the new clock rate */
390 val |= (esel ? EP93XX_SYSCON_CLKDIV_ESEL : 0) |
391 (psel ? EP93XX_SYSCON_CLKDIV_PSEL : 0) |
392 (pdiv << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | div;
393 ep93xx_syscon_swlocked_write(val, clk->enable_reg);
394 return 0;
397 int clk_set_rate(struct clk *clk, unsigned long rate)
399 if (clk->set_rate)
400 return clk->set_rate(clk, rate);
402 return -EINVAL;
404 EXPORT_SYMBOL(clk_set_rate);
407 static char fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 };
408 static char hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 };
409 static char pclk_divisors[] = { 1, 2, 4, 8 };
412 * PLL rate = 14.7456 MHz * (X1FBD + 1) * (X2FBD + 1) / (X2IPD + 1) / 2^PS
414 static unsigned long calc_pll_rate(u32 config_word)
416 unsigned long long rate;
417 int i;
419 rate = clk_xtali.rate;
420 rate *= ((config_word >> 11) & 0x1f) + 1; /* X1FBD */
421 rate *= ((config_word >> 5) & 0x3f) + 1; /* X2FBD */
422 do_div(rate, (config_word & 0x1f) + 1); /* X2IPD */
423 for (i = 0; i < ((config_word >> 16) & 3); i++) /* PS */
424 rate >>= 1;
426 return (unsigned long)rate;
429 static void __init ep93xx_dma_clock_init(void)
431 clk_m2p0.rate = clk_h.rate;
432 clk_m2p1.rate = clk_h.rate;
433 clk_m2p2.rate = clk_h.rate;
434 clk_m2p3.rate = clk_h.rate;
435 clk_m2p4.rate = clk_h.rate;
436 clk_m2p5.rate = clk_h.rate;
437 clk_m2p6.rate = clk_h.rate;
438 clk_m2p7.rate = clk_h.rate;
439 clk_m2p8.rate = clk_h.rate;
440 clk_m2p9.rate = clk_h.rate;
441 clk_m2m0.rate = clk_h.rate;
442 clk_m2m1.rate = clk_h.rate;
445 static int __init ep93xx_clock_init(void)
447 u32 value;
448 int i;
450 value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1);
451 if (!(value & 0x00800000)) { /* PLL1 bypassed? */
452 clk_pll1.rate = clk_xtali.rate;
453 } else {
454 clk_pll1.rate = calc_pll_rate(value);
456 clk_f.rate = clk_pll1.rate / fclk_divisors[(value >> 25) & 0x7];
457 clk_h.rate = clk_pll1.rate / hclk_divisors[(value >> 20) & 0x7];
458 clk_p.rate = clk_h.rate / pclk_divisors[(value >> 18) & 0x3];
459 ep93xx_dma_clock_init();
461 value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2);
462 if (!(value & 0x00080000)) { /* PLL2 bypassed? */
463 clk_pll2.rate = clk_xtali.rate;
464 } else if (value & 0x00040000) { /* PLL2 enabled? */
465 clk_pll2.rate = calc_pll_rate(value);
466 } else {
467 clk_pll2.rate = 0;
469 clk_usb_host.rate = clk_pll2.rate / (((value >> 28) & 0xf) + 1);
471 printk(KERN_INFO "ep93xx: PLL1 running at %ld MHz, PLL2 at %ld MHz\n",
472 clk_pll1.rate / 1000000, clk_pll2.rate / 1000000);
473 printk(KERN_INFO "ep93xx: FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",
474 clk_f.rate / 1000000, clk_h.rate / 1000000,
475 clk_p.rate / 1000000);
477 for (i = 0; i < ARRAY_SIZE(clocks); i++)
478 clkdev_add(&clocks[i]);
479 return 0;
481 arch_initcall(ep93xx_clock_init);