drivers/usb/serial/ftdi_sio.h

   1 /*
   2  * Definitions for the FTDI USB Single Port Serial Converter -
   3  * known as FTDI_SIO (Serial Input/Output application of the chipset)
   4  *
   5  * The example I have is known as the USC-1000 which is available from
   6  * http://www.dse.co.nz - cat no XH4214 It looks similar to this:
   7  * http://www.dansdata.com/usbser.htm but I can't be sure There are other
   8  * USC-1000s which don't look like my device though so beware!
   9  *
  10  * The device is based on the FTDI FT8U100AX chip. It has a DB25 on one side,
  11  * USB on the other.
  12  *
  13  * Thanx to FTDI (http://www.ftdichip.com) for so kindly providing details
  14  * of the protocol required to talk to the device and ongoing assistence
  15  * during development.
  16  *
  17  * Bill Ryder - bryder@sgi.com formerly of Silicon Graphics, Inc.- wrote the
  18  * FTDI_SIO implementation.
  19  *
  20  * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais
  21  * from Rudolf Gugler
  22  *
  23  */
  24
  25 #define FTDI_VID        0x0403  /* Vendor Id */
  26 #define FTDI_SIO_PID    0x8372  /* Product Id SIO application of 8U100AX  */
  27 #define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */
  28 #define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */
  29 #define FTDI_8U2232C_PID 0x6010 /* Dual channel device */
  30 #define FTDI_232RL_PID  0xFBFA  /* Product ID for FT232RL */
  31 #define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */
  32 #define FTDI_RELAIS_PID 0xFA10  /* Relais device from Rudolf Gugler */
  33 #define FTDI_NF_RIC_VID 0x0DCD  /* Vendor Id */
  34 #define FTDI_NF_RIC_PID 0x0001  /* Product Id */
  35 #define FTDI_USBX_707_PID 0xF857        /* ADSTech IR Blaster USBX-707 */
  36
  37 /* Larsen and Brusgaard AltiTrack/USBtrack  */
  38 #define LARSENBRUSGAARD_VID             0x0FD8
  39 #define LB_ALTITRACK_PID                0x0001
  40
  41 /* www.canusb.com Lawicel CANUSB device */
  42 #define FTDI_CANUSB_PID 0xFFA8 /* Product Id */
  43
  44 /* AlphaMicro Components AMC-232USB01 device */
  45 #define FTDI_AMC232_PID 0xFF00 /* Product Id */
  46
  47 /* www.candapter.com Ewert Energy Systems CANdapter device */
  48 #define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
  49
  50 /* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
  51 /* the VID is the standard ftdi vid (FTDI_VID) */
  52 #define FTDI_SCS_DEVICE_0_PID 0xD010    /* SCS PTC-IIusb */
  53 #define FTDI_SCS_DEVICE_1_PID 0xD011    /* SCS Tracker / DSP TNC */
  54 #define FTDI_SCS_DEVICE_2_PID 0xD012
  55 #define FTDI_SCS_DEVICE_3_PID 0xD013
  56 #define FTDI_SCS_DEVICE_4_PID 0xD014
  57 #define FTDI_SCS_DEVICE_5_PID 0xD015
  58 #define FTDI_SCS_DEVICE_6_PID 0xD016
  59 #define FTDI_SCS_DEVICE_7_PID 0xD017
  60
  61 /* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */
  62 #define FTDI_ACTZWAVE_PID       0xF2D0
  63
  64
  65 /* www.starting-point-systems.com µChameleon device */
  66 #define FTDI_MICRO_CHAMELEON_PID        0xCAA0  /* Product Id */
  67
  68 /* www.irtrans.de device */
  69 #define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
  70
  71
  72 /* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */
  73 #define FTDI_TTUSB_PID 0xFF20 /* Product Id */
  74
  75 /* iPlus device */
  76 #define FTDI_IPLUS_PID 0xD070 /* Product Id */
  77 #define FTDI_IPLUS2_PID 0xD071 /* Product Id */
  78
  79 /* DMX4ALL DMX Interfaces */
  80 #define FTDI_DMX4ALL 0xC850
  81
  82 /* OpenDCC (www.opendcc.de) product id */
  83 #define FTDI_OPENDCC_PID        0xBFD8
  84 #define FTDI_OPENDCC_SNIFFER_PID        0xBFD9
  85 #define FTDI_OPENDCC_THROTTLE_PID       0xBFDA
  86 #define FTDI_OPENDCC_GATEWAY_PID        0xBFDB
  87
  88 /* Sprog II (Andrew Crosland's SprogII DCC interface) */
  89 #define FTDI_SPROG_II           0xF0C8
  90
  91 /* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */
  92 /* they use the ftdi chipset for the USB interface and the vendor id is the same */
  93 #define FTDI_XF_632_PID 0xFC08  /* 632: 16x2 Character Display */
  94 #define FTDI_XF_634_PID 0xFC09  /* 634: 20x4 Character Display */
  95 #define FTDI_XF_547_PID 0xFC0A  /* 547: Two line Display */
  96 #define FTDI_XF_633_PID 0xFC0B  /* 633: 16x2 Character Display with Keys */
  97 #define FTDI_XF_631_PID 0xFC0C  /* 631: 20x2 Character Display */
  98 #define FTDI_XF_635_PID 0xFC0D  /* 635: 20x4 Character Display */
  99 #define FTDI_XF_640_PID 0xFC0E  /* 640: Two line Display */
 100 #define FTDI_XF_642_PID 0xFC0F  /* 642: Two line Display */
 101
 102 /* Video Networks Limited / Homechoice in the UK use an ftdi-based device for their 1Mb */
 103 /* broadband internet service.  The following PID is exhibited by the usb device supplied */
 104 /* (the VID is the standard ftdi vid (FTDI_VID) */
 105 #define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */
 106
 107 /*
 108  * PCDJ use ftdi based dj-controllers.  The following PID is for their DAC-2 device
 109  * http://www.pcdjhardware.com/DAC2.asp (PID sent by Wouter Paesen)
 110  * (the VID is the standard ftdi vid (FTDI_VID) */
 111 #define FTDI_PCDJ_DAC2_PID 0xFA88
 112
 113 /*
 114  * The following are the values for the Matrix Orbital LCD displays,
 115  * which are the FT232BM ( similar to the 8U232AM )
 116  */
 117 #define FTDI_MTXORB_0_PID      0xFA00  /* Matrix Orbital Product Id */
 118 #define FTDI_MTXORB_1_PID      0xFA01  /* Matrix Orbital Product Id */
 119 #define FTDI_MTXORB_2_PID      0xFA02  /* Matrix Orbital Product Id */
 120 #define FTDI_MTXORB_3_PID      0xFA03  /* Matrix Orbital Product Id */
 121 #define FTDI_MTXORB_4_PID      0xFA04  /* Matrix Orbital Product Id */
 122 #define FTDI_MTXORB_5_PID      0xFA05  /* Matrix Orbital Product Id */
 123 #define FTDI_MTXORB_6_PID      0xFA06  /* Matrix Orbital Product Id */
 124
 125 /* OOCDlink by Joern Kaipf <joernk@web.de>
 126  * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */
 127 #define FTDI_OOCDLINK_PID       0xbaf8  /* Amontec JTAGkey */
 128
 129 /*
 130  * The following are the values for the Matrix Orbital FTDI Range
 131  * Anything in this range will use an FT232RL.
 132  */
 133 #define MTXORB_VID                      0x1B3D
 134 #define MTXORB_FTDI_RANGE_0100_PID      0x0100
 135 #define MTXORB_FTDI_RANGE_0101_PID      0x0101
 136 #define MTXORB_FTDI_RANGE_0102_PID      0x0102
 137 #define MTXORB_FTDI_RANGE_0103_PID      0x0103
 138 #define MTXORB_FTDI_RANGE_0104_PID      0x0104
 139 #define MTXORB_FTDI_RANGE_0105_PID      0x0105
 140 #define MTXORB_FTDI_RANGE_0106_PID      0x0106
 141 #define MTXORB_FTDI_RANGE_0107_PID      0x0107
 142 #define MTXORB_FTDI_RANGE_0108_PID      0x0108
 143 #define MTXORB_FTDI_RANGE_0109_PID      0x0109
 144 #define MTXORB_FTDI_RANGE_010A_PID      0x010A
 145 #define MTXORB_FTDI_RANGE_010B_PID      0x010B
 146 #define MTXORB_FTDI_RANGE_010C_PID      0x010C
 147 #define MTXORB_FTDI_RANGE_010D_PID      0x010D
 148 #define MTXORB_FTDI_RANGE_010E_PID      0x010E
 149 #define MTXORB_FTDI_RANGE_010F_PID      0x010F
 150 #define MTXORB_FTDI_RANGE_0110_PID      0x0110
 151 #define MTXORB_FTDI_RANGE_0111_PID      0x0111
 152 #define MTXORB_FTDI_RANGE_0112_PID      0x0112
 153 #define MTXORB_FTDI_RANGE_0113_PID      0x0113
 154 #define MTXORB_FTDI_RANGE_0114_PID      0x0114
 155 #define MTXORB_FTDI_RANGE_0115_PID      0x0115
 156 #define MTXORB_FTDI_RANGE_0116_PID      0x0116
 157 #define MTXORB_FTDI_RANGE_0117_PID      0x0117
 158 #define MTXORB_FTDI_RANGE_0118_PID      0x0118
 159 #define MTXORB_FTDI_RANGE_0119_PID      0x0119
 160 #define MTXORB_FTDI_RANGE_011A_PID      0x011A
 161 #define MTXORB_FTDI_RANGE_011B_PID      0x011B
 162 #define MTXORB_FTDI_RANGE_011C_PID      0x011C
 163 #define MTXORB_FTDI_RANGE_011D_PID      0x011D
 164 #define MTXORB_FTDI_RANGE_011E_PID      0x011E
 165 #define MTXORB_FTDI_RANGE_011F_PID      0x011F
 166 #define MTXORB_FTDI_RANGE_0120_PID      0x0120
 167 #define MTXORB_FTDI_RANGE_0121_PID      0x0121
 168 #define MTXORB_FTDI_RANGE_0122_PID      0x0122
 169 #define MTXORB_FTDI_RANGE_0123_PID      0x0123
 170 #define MTXORB_FTDI_RANGE_0124_PID      0x0124
 171 #define MTXORB_FTDI_RANGE_0125_PID      0x0125
 172 #define MTXORB_FTDI_RANGE_0126_PID      0x0126
 173 #define MTXORB_FTDI_RANGE_0127_PID      0x0127
 174 #define MTXORB_FTDI_RANGE_0128_PID      0x0128
 175 #define MTXORB_FTDI_RANGE_0129_PID      0x0129
 176 #define MTXORB_FTDI_RANGE_012A_PID      0x012A
 177 #define MTXORB_FTDI_RANGE_012B_PID      0x012B
 178 #define MTXORB_FTDI_RANGE_012C_PID      0x012C
 179 #define MTXORB_FTDI_RANGE_012D_PID      0x012D
 180 #define MTXORB_FTDI_RANGE_012E_PID      0x012E
 181 #define MTXORB_FTDI_RANGE_012F_PID      0x012F
 182 #define MTXORB_FTDI_RANGE_0130_PID      0x0130
 183 #define MTXORB_FTDI_RANGE_0131_PID      0x0131
 184 #define MTXORB_FTDI_RANGE_0132_PID      0x0132
 185 #define MTXORB_FTDI_RANGE_0133_PID      0x0133
 186 #define MTXORB_FTDI_RANGE_0134_PID      0x0134
 187 #define MTXORB_FTDI_RANGE_0135_PID      0x0135
 188 #define MTXORB_FTDI_RANGE_0136_PID      0x0136
 189 #define MTXORB_FTDI_RANGE_0137_PID      0x0137
 190 #define MTXORB_FTDI_RANGE_0138_PID      0x0138
 191 #define MTXORB_FTDI_RANGE_0139_PID      0x0139
 192 #define MTXORB_FTDI_RANGE_013A_PID      0x013A
 193 #define MTXORB_FTDI_RANGE_013B_PID      0x013B
 194 #define MTXORB_FTDI_RANGE_013C_PID      0x013C
 195 #define MTXORB_FTDI_RANGE_013D_PID      0x013D
 196 #define MTXORB_FTDI_RANGE_013E_PID      0x013E
 197 #define MTXORB_FTDI_RANGE_013F_PID      0x013F
 198 #define MTXORB_FTDI_RANGE_0140_PID      0x0140
 199 #define MTXORB_FTDI_RANGE_0141_PID      0x0141
 200 #define MTXORB_FTDI_RANGE_0142_PID      0x0142
 201 #define MTXORB_FTDI_RANGE_0143_PID      0x0143
 202 #define MTXORB_FTDI_RANGE_0144_PID      0x0144
 203 #define MTXORB_FTDI_RANGE_0145_PID      0x0145
 204 #define MTXORB_FTDI_RANGE_0146_PID      0x0146
 205 #define MTXORB_FTDI_RANGE_0147_PID      0x0147
 206 #define MTXORB_FTDI_RANGE_0148_PID      0x0148
 207 #define MTXORB_FTDI_RANGE_0149_PID      0x0149
 208 #define MTXORB_FTDI_RANGE_014A_PID      0x014A
 209 #define MTXORB_FTDI_RANGE_014B_PID      0x014B
 210 #define MTXORB_FTDI_RANGE_014C_PID      0x014C
 211 #define MTXORB_FTDI_RANGE_014D_PID      0x014D
 212 #define MTXORB_FTDI_RANGE_014E_PID      0x014E
 213 #define MTXORB_FTDI_RANGE_014F_PID      0x014F
 214 #define MTXORB_FTDI_RANGE_0150_PID      0x0150
 215 #define MTXORB_FTDI_RANGE_0151_PID      0x0151
 216 #define MTXORB_FTDI_RANGE_0152_PID      0x0152
 217 #define MTXORB_FTDI_RANGE_0153_PID      0x0153
 218 #define MTXORB_FTDI_RANGE_0154_PID      0x0154
 219 #define MTXORB_FTDI_RANGE_0155_PID      0x0155
 220 #define MTXORB_FTDI_RANGE_0156_PID      0x0156
 221 #define MTXORB_FTDI_RANGE_0157_PID      0x0157
 222 #define MTXORB_FTDI_RANGE_0158_PID      0x0158
 223 #define MTXORB_FTDI_RANGE_0159_PID      0x0159
 224 #define MTXORB_FTDI_RANGE_015A_PID      0x015A
 225 #define MTXORB_FTDI_RANGE_015B_PID      0x015B
 226 #define MTXORB_FTDI_RANGE_015C_PID      0x015C
 227 #define MTXORB_FTDI_RANGE_015D_PID      0x015D
 228 #define MTXORB_FTDI_RANGE_015E_PID      0x015E
 229 #define MTXORB_FTDI_RANGE_015F_PID      0x015F
 230 #define MTXORB_FTDI_RANGE_0160_PID      0x0160
 231 #define MTXORB_FTDI_RANGE_0161_PID      0x0161
 232 #define MTXORB_FTDI_RANGE_0162_PID      0x0162
 233 #define MTXORB_FTDI_RANGE_0163_PID      0x0163
 234 #define MTXORB_FTDI_RANGE_0164_PID      0x0164
 235 #define MTXORB_FTDI_RANGE_0165_PID      0x0165
 236 #define MTXORB_FTDI_RANGE_0166_PID      0x0166
 237 #define MTXORB_FTDI_RANGE_0167_PID      0x0167
 238 #define MTXORB_FTDI_RANGE_0168_PID      0x0168
 239 #define MTXORB_FTDI_RANGE_0169_PID      0x0169
 240 #define MTXORB_FTDI_RANGE_016A_PID      0x016A
 241 #define MTXORB_FTDI_RANGE_016B_PID      0x016B
 242 #define MTXORB_FTDI_RANGE_016C_PID      0x016C
 243 #define MTXORB_FTDI_RANGE_016D_PID      0x016D
 244 #define MTXORB_FTDI_RANGE_016E_PID      0x016E
 245 #define MTXORB_FTDI_RANGE_016F_PID      0x016F
 246 #define MTXORB_FTDI_RANGE_0170_PID      0x0170
 247 #define MTXORB_FTDI_RANGE_0171_PID      0x0171
 248 #define MTXORB_FTDI_RANGE_0172_PID      0x0172
 249 #define MTXORB_FTDI_RANGE_0173_PID      0x0173
 250 #define MTXORB_FTDI_RANGE_0174_PID      0x0174
 251 #define MTXORB_FTDI_RANGE_0175_PID      0x0175
 252 #define MTXORB_FTDI_RANGE_0176_PID      0x0176
 253 #define MTXORB_FTDI_RANGE_0177_PID      0x0177
 254 #define MTXORB_FTDI_RANGE_0178_PID      0x0178
 255 #define MTXORB_FTDI_RANGE_0179_PID      0x0179
 256 #define MTXORB_FTDI_RANGE_017A_PID      0x017A
 257 #define MTXORB_FTDI_RANGE_017B_PID      0x017B
 258 #define MTXORB_FTDI_RANGE_017C_PID      0x017C
 259 #define MTXORB_FTDI_RANGE_017D_PID      0x017D
 260 #define MTXORB_FTDI_RANGE_017E_PID      0x017E
 261 #define MTXORB_FTDI_RANGE_017F_PID      0x017F
 262 #define MTXORB_FTDI_RANGE_0180_PID      0x0180
 263 #define MTXORB_FTDI_RANGE_0181_PID      0x0181
 264 #define MTXORB_FTDI_RANGE_0182_PID      0x0182
 265 #define MTXORB_FTDI_RANGE_0183_PID      0x0183
 266 #define MTXORB_FTDI_RANGE_0184_PID      0x0184
 267 #define MTXORB_FTDI_RANGE_0185_PID      0x0185
 268 #define MTXORB_FTDI_RANGE_0186_PID      0x0186
 269 #define MTXORB_FTDI_RANGE_0187_PID      0x0187
 270 #define MTXORB_FTDI_RANGE_0188_PID      0x0188
 271 #define MTXORB_FTDI_RANGE_0189_PID      0x0189
 272 #define MTXORB_FTDI_RANGE_018A_PID      0x018A
 273 #define MTXORB_FTDI_RANGE_018B_PID      0x018B
 274 #define MTXORB_FTDI_RANGE_018C_PID      0x018C
 275 #define MTXORB_FTDI_RANGE_018D_PID      0x018D
 276 #define MTXORB_FTDI_RANGE_018E_PID      0x018E
 277 #define MTXORB_FTDI_RANGE_018F_PID      0x018F
 278 #define MTXORB_FTDI_RANGE_0190_PID      0x0190
 279 #define MTXORB_FTDI_RANGE_0191_PID      0x0191
 280 #define MTXORB_FTDI_RANGE_0192_PID      0x0192
 281 #define MTXORB_FTDI_RANGE_0193_PID      0x0193
 282 #define MTXORB_FTDI_RANGE_0194_PID      0x0194
 283 #define MTXORB_FTDI_RANGE_0195_PID      0x0195
 284 #define MTXORB_FTDI_RANGE_0196_PID      0x0196
 285 #define MTXORB_FTDI_RANGE_0197_PID      0x0197
 286 #define MTXORB_FTDI_RANGE_0198_PID      0x0198
 287 #define MTXORB_FTDI_RANGE_0199_PID      0x0199
 288 #define MTXORB_FTDI_RANGE_019A_PID      0x019A
 289 #define MTXORB_FTDI_RANGE_019B_PID      0x019B
 290 #define MTXORB_FTDI_RANGE_019C_PID      0x019C
 291 #define MTXORB_FTDI_RANGE_019D_PID      0x019D
 292 #define MTXORB_FTDI_RANGE_019E_PID      0x019E
 293 #define MTXORB_FTDI_RANGE_019F_PID      0x019F
 294 #define MTXORB_FTDI_RANGE_01A0_PID      0x01A0
 295 #define MTXORB_FTDI_RANGE_01A1_PID      0x01A1
 296 #define MTXORB_FTDI_RANGE_01A2_PID      0x01A2
 297 #define MTXORB_FTDI_RANGE_01A3_PID      0x01A3
 298 #define MTXORB_FTDI_RANGE_01A4_PID      0x01A4
 299 #define MTXORB_FTDI_RANGE_01A5_PID      0x01A5
 300 #define MTXORB_FTDI_RANGE_01A6_PID      0x01A6
 301 #define MTXORB_FTDI_RANGE_01A7_PID      0x01A7
 302 #define MTXORB_FTDI_RANGE_01A8_PID      0x01A8
 303 #define MTXORB_FTDI_RANGE_01A9_PID      0x01A9
 304 #define MTXORB_FTDI_RANGE_01AA_PID      0x01AA
 305 #define MTXORB_FTDI_RANGE_01AB_PID      0x01AB
 306 #define MTXORB_FTDI_RANGE_01AC_PID      0x01AC
 307 #define MTXORB_FTDI_RANGE_01AD_PID      0x01AD
 308 #define MTXORB_FTDI_RANGE_01AE_PID      0x01AE
 309 #define MTXORB_FTDI_RANGE_01AF_PID      0x01AF
 310 #define MTXORB_FTDI_RANGE_01B0_PID      0x01B0
 311 #define MTXORB_FTDI_RANGE_01B1_PID      0x01B1
 312 #define MTXORB_FTDI_RANGE_01B2_PID      0x01B2
 313 #define MTXORB_FTDI_RANGE_01B3_PID      0x01B3
 314 #define MTXORB_FTDI_RANGE_01B4_PID      0x01B4
 315 #define MTXORB_FTDI_RANGE_01B5_PID      0x01B5
 316 #define MTXORB_FTDI_RANGE_01B6_PID      0x01B6
 317 #define MTXORB_FTDI_RANGE_01B7_PID      0x01B7
 318 #define MTXORB_FTDI_RANGE_01B8_PID      0x01B8
 319 #define MTXORB_FTDI_RANGE_01B9_PID      0x01B9
 320 #define MTXORB_FTDI_RANGE_01BA_PID      0x01BA
 321 #define MTXORB_FTDI_RANGE_01BB_PID      0x01BB
 322 #define MTXORB_FTDI_RANGE_01BC_PID      0x01BC
 323 #define MTXORB_FTDI_RANGE_01BD_PID      0x01BD
 324 #define MTXORB_FTDI_RANGE_01BE_PID      0x01BE
 325 #define MTXORB_FTDI_RANGE_01BF_PID      0x01BF
 326 #define MTXORB_FTDI_RANGE_01C0_PID      0x01C0
 327 #define MTXORB_FTDI_RANGE_01C1_PID      0x01C1
 328 #define MTXORB_FTDI_RANGE_01C2_PID      0x01C2
 329 #define MTXORB_FTDI_RANGE_01C3_PID      0x01C3
 330 #define MTXORB_FTDI_RANGE_01C4_PID      0x01C4
 331 #define MTXORB_FTDI_RANGE_01C5_PID      0x01C5
 332 #define MTXORB_FTDI_RANGE_01C6_PID      0x01C6
 333 #define MTXORB_FTDI_RANGE_01C7_PID      0x01C7
 334 #define MTXORB_FTDI_RANGE_01C8_PID      0x01C8
 335 #define MTXORB_FTDI_RANGE_01C9_PID      0x01C9
 336 #define MTXORB_FTDI_RANGE_01CA_PID      0x01CA
 337 #define MTXORB_FTDI_RANGE_01CB_PID      0x01CB
 338 #define MTXORB_FTDI_RANGE_01CC_PID      0x01CC
 339 #define MTXORB_FTDI_RANGE_01CD_PID      0x01CD
 340 #define MTXORB_FTDI_RANGE_01CE_PID      0x01CE
 341 #define MTXORB_FTDI_RANGE_01CF_PID      0x01CF
 342 #define MTXORB_FTDI_RANGE_01D0_PID      0x01D0
 343 #define MTXORB_FTDI_RANGE_01D1_PID      0x01D1
 344 #define MTXORB_FTDI_RANGE_01D2_PID      0x01D2
 345 #define MTXORB_FTDI_RANGE_01D3_PID      0x01D3
 346 #define MTXORB_FTDI_RANGE_01D4_PID      0x01D4
 347 #define MTXORB_FTDI_RANGE_01D5_PID      0x01D5
 348 #define MTXORB_FTDI_RANGE_01D6_PID      0x01D6
 349 #define MTXORB_FTDI_RANGE_01D7_PID      0x01D7
 350 #define MTXORB_FTDI_RANGE_01D8_PID      0x01D8
 351 #define MTXORB_FTDI_RANGE_01D9_PID      0x01D9
 352 #define MTXORB_FTDI_RANGE_01DA_PID      0x01DA
 353 #define MTXORB_FTDI_RANGE_01DB_PID      0x01DB
 354 #define MTXORB_FTDI_RANGE_01DC_PID      0x01DC
 355 #define MTXORB_FTDI_RANGE_01DD_PID      0x01DD
 356 #define MTXORB_FTDI_RANGE_01DE_PID      0x01DE
 357 #define MTXORB_FTDI_RANGE_01DF_PID      0x01DF
 358 #define MTXORB_FTDI_RANGE_01E0_PID      0x01E0
 359 #define MTXORB_FTDI_RANGE_01E1_PID      0x01E1
 360 #define MTXORB_FTDI_RANGE_01E2_PID      0x01E2
 361 #define MTXORB_FTDI_RANGE_01E3_PID      0x01E3
 362 #define MTXORB_FTDI_RANGE_01E4_PID      0x01E4
 363 #define MTXORB_FTDI_RANGE_01E5_PID      0x01E5
 364 #define MTXORB_FTDI_RANGE_01E6_PID      0x01E6
 365 #define MTXORB_FTDI_RANGE_01E7_PID      0x01E7
 366 #define MTXORB_FTDI_RANGE_01E8_PID      0x01E8
 367 #define MTXORB_FTDI_RANGE_01E9_PID      0x01E9
 368 #define MTXORB_FTDI_RANGE_01EA_PID      0x01EA
 369 #define MTXORB_FTDI_RANGE_01EB_PID      0x01EB
 370 #define MTXORB_FTDI_RANGE_01EC_PID      0x01EC
 371 #define MTXORB_FTDI_RANGE_01ED_PID      0x01ED
 372 #define MTXORB_FTDI_RANGE_01EE_PID      0x01EE
 373 #define MTXORB_FTDI_RANGE_01EF_PID      0x01EF
 374 #define MTXORB_FTDI_RANGE_01F0_PID      0x01F0
 375 #define MTXORB_FTDI_RANGE_01F1_PID      0x01F1
 376 #define MTXORB_FTDI_RANGE_01F2_PID      0x01F2
 377 #define MTXORB_FTDI_RANGE_01F3_PID      0x01F3
 378 #define MTXORB_FTDI_RANGE_01F4_PID      0x01F4
 379 #define MTXORB_FTDI_RANGE_01F5_PID      0x01F5
 380 #define MTXORB_FTDI_RANGE_01F6_PID      0x01F6
 381 #define MTXORB_FTDI_RANGE_01F7_PID      0x01F7
 382 #define MTXORB_FTDI_RANGE_01F8_PID      0x01F8
 383 #define MTXORB_FTDI_RANGE_01F9_PID      0x01F9
 384 #define MTXORB_FTDI_RANGE_01FA_PID      0x01FA
 385 #define MTXORB_FTDI_RANGE_01FB_PID      0x01FB
 386 #define MTXORB_FTDI_RANGE_01FC_PID      0x01FC
 387 #define MTXORB_FTDI_RANGE_01FD_PID      0x01FD
 388 #define MTXORB_FTDI_RANGE_01FE_PID      0x01FE
 389 #define MTXORB_FTDI_RANGE_01FF_PID      0x01FF
 390
 391
 392
 393 /* Interbiometrics USB I/O Board */
 394 /* Developed for Interbiometrics by Rudolf Gugler */
 395 #define INTERBIOMETRICS_VID              0x1209
 396 #define INTERBIOMETRICS_IOBOARD_PID      0x1002
 397 #define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006
 398
 399 /*
 400  * The following are the values for the Perle Systems
 401  * UltraPort USB serial converters
 402  */
 403 #define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */
 404
 405 /*
 406  * The following are the values for the Sealevel SeaLINK+ adapters.
 407  * (Original list sent by Tuan Hoang.  Ian Abbott renamed the macros and
 408  * removed some PIDs that don't seem to match any existing products.)
 409  */
 410 #define SEALEVEL_VID            0x0c52  /* Sealevel Vendor ID */
 411 #define SEALEVEL_2101_PID       0x2101  /* SeaLINK+232 (2101/2105) */
 412 #define SEALEVEL_2102_PID       0x2102  /* SeaLINK+485 (2102) */
 413 #define SEALEVEL_2103_PID       0x2103  /* SeaLINK+232I (2103) */
 414 #define SEALEVEL_2104_PID       0x2104  /* SeaLINK+485I (2104) */
 415 #define SEALEVEL_2106_PID       0x9020  /* SeaLINK+422 (2106) */
 416 #define SEALEVEL_2201_1_PID     0x2211  /* SeaPORT+2/232 (2201) Port 1 */
 417 #define SEALEVEL_2201_2_PID     0x2221  /* SeaPORT+2/232 (2201) Port 2 */
 418 #define SEALEVEL_2202_1_PID     0x2212  /* SeaPORT+2/485 (2202) Port 1 */
 419 #define SEALEVEL_2202_2_PID     0x2222  /* SeaPORT+2/485 (2202) Port 2 */
 420 #define SEALEVEL_2203_1_PID     0x2213  /* SeaPORT+2 (2203) Port 1 */
 421 #define SEALEVEL_2203_2_PID     0x2223  /* SeaPORT+2 (2203) Port 2 */
 422 #define SEALEVEL_2401_1_PID     0x2411  /* SeaPORT+4/232 (2401) Port 1 */
 423 #define SEALEVEL_2401_2_PID     0x2421  /* SeaPORT+4/232 (2401) Port 2 */
 424 #define SEALEVEL_2401_3_PID     0x2431  /* SeaPORT+4/232 (2401) Port 3 */
 425 #define SEALEVEL_2401_4_PID     0x2441  /* SeaPORT+4/232 (2401) Port 4 */
 426 #define SEALEVEL_2402_1_PID     0x2412  /* SeaPORT+4/485 (2402) Port 1 */
 427 #define SEALEVEL_2402_2_PID     0x2422  /* SeaPORT+4/485 (2402) Port 2 */
 428 #define SEALEVEL_2402_3_PID     0x2432  /* SeaPORT+4/485 (2402) Port 3 */
 429 #define SEALEVEL_2402_4_PID     0x2442  /* SeaPORT+4/485 (2402) Port 4 */
 430 #define SEALEVEL_2403_1_PID     0x2413  /* SeaPORT+4 (2403) Port 1 */
 431 #define SEALEVEL_2403_2_PID     0x2423  /* SeaPORT+4 (2403) Port 2 */
 432 #define SEALEVEL_2403_3_PID     0x2433  /* SeaPORT+4 (2403) Port 3 */
 433 #define SEALEVEL_2403_4_PID     0x2443  /* SeaPORT+4 (2403) Port 4 */
 434 #define SEALEVEL_2801_1_PID     0X2811  /* SeaLINK+8/232 (2801) Port 1 */
 435 #define SEALEVEL_2801_2_PID     0X2821  /* SeaLINK+8/232 (2801) Port 2 */
 436 #define SEALEVEL_2801_3_PID     0X2831  /* SeaLINK+8/232 (2801) Port 3 */
 437 #define SEALEVEL_2801_4_PID     0X2841  /* SeaLINK+8/232 (2801) Port 4 */
 438 #define SEALEVEL_2801_5_PID     0X2851  /* SeaLINK+8/232 (2801) Port 5 */
 439 #define SEALEVEL_2801_6_PID     0X2861  /* SeaLINK+8/232 (2801) Port 6 */
 440 #define SEALEVEL_2801_7_PID     0X2871  /* SeaLINK+8/232 (2801) Port 7 */
 441 #define SEALEVEL_2801_8_PID     0X2881  /* SeaLINK+8/232 (2801) Port 8 */
 442 #define SEALEVEL_2802_1_PID     0X2812  /* SeaLINK+8/485 (2802) Port 1 */
 443 #define SEALEVEL_2802_2_PID     0X2822  /* SeaLINK+8/485 (2802) Port 2 */
 444 #define SEALEVEL_2802_3_PID     0X2832  /* SeaLINK+8/485 (2802) Port 3 */
 445 #define SEALEVEL_2802_4_PID     0X2842  /* SeaLINK+8/485 (2802) Port 4 */
 446 #define SEALEVEL_2802_5_PID     0X2852  /* SeaLINK+8/485 (2802) Port 5 */
 447 #define SEALEVEL_2802_6_PID     0X2862  /* SeaLINK+8/485 (2802) Port 6 */
 448 #define SEALEVEL_2802_7_PID     0X2872  /* SeaLINK+8/485 (2802) Port 7 */
 449 #define SEALEVEL_2802_8_PID     0X2882  /* SeaLINK+8/485 (2802) Port 8 */
 450 #define SEALEVEL_2803_1_PID     0X2813  /* SeaLINK+8 (2803) Port 1 */
 451 #define SEALEVEL_2803_2_PID     0X2823  /* SeaLINK+8 (2803) Port 2 */
 452 #define SEALEVEL_2803_3_PID     0X2833  /* SeaLINK+8 (2803) Port 3 */
 453 #define SEALEVEL_2803_4_PID     0X2843  /* SeaLINK+8 (2803) Port 4 */
 454 #define SEALEVEL_2803_5_PID     0X2853  /* SeaLINK+8 (2803) Port 5 */
 455 #define SEALEVEL_2803_6_PID     0X2863  /* SeaLINK+8 (2803) Port 6 */
 456 #define SEALEVEL_2803_7_PID     0X2873  /* SeaLINK+8 (2803) Port 7 */
 457 #define SEALEVEL_2803_8_PID     0X2883  /* SeaLINK+8 (2803) Port 8 */
 458
 459 /*
 460  * The following are the values for two KOBIL chipcard terminals.
 461  */
 462 #define KOBIL_VID               0x0d46  /* KOBIL Vendor ID */
 463 #define KOBIL_CONV_B1_PID       0x2020  /* KOBIL Konverter for B1 */
 464 #define KOBIL_CONV_KAAN_PID     0x2021  /* KOBIL_Konverter for KAAN */
 465
 466 /*
 467  * Icom ID-1 digital transceiver
 468  */
 469
 470 #define ICOM_ID1_VID            0x0C26
 471 #define ICOM_ID1_PID            0x0004
 472
 473 /*
 474  * ASK.fr devices
 475  */
 476 #define FTDI_ASK_RDR400_PID     0xC991  /* ASK RDR 400 series card reader */
 477
 478 /*
 479  * FTDI USB UART chips used in construction projects from the
 480  * Elektor Electronics magazine (http://elektor-electronics.co.uk)
 481  */
 482 #define ELEKTOR_VID             0x0C7D
 483 #define ELEKTOR_FT323R_PID      0x0005  /* RFID-Reader, issue 09-2006 */
 484
 485 /*
 486  * DSS-20 Sync Station for Sony Ericsson P800
 487  */
 488 #define FTDI_DSS20_PID          0xFC82
 489
 490 /*
 491  * Home Electronics (www.home-electro.com) USB gadgets
 492  */
 493 #define FTDI_HE_TIRA1_PID       0xFA78  /* Tira-1 IR transceiver */
 494
 495 /* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */
 496 /* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */
 497 #define FTDI_USB_UIRT_PID       0xF850  /* Product Id */
 498
 499 /* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */
 500
 501 #define FTDI_TNC_X_PID          0xEBE0
 502
 503 /*
 504  * ELV USB devices submitted by Christian Abt of ELV (www.elv.de).
 505  * All of these devices use FTDI's vendor ID (0x0403).
 506  *
 507  * The previously included PID for the UO 100 module was incorrect.
 508  * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58).
 509  *
 510  * Armin Laeuger originally sent the PID for the UM 100 module.
 511  */
 512 #define FTDI_R2000KU_TRUE_RNG   0xFB80  /* R2000KU TRUE RNG */
 513 #define FTDI_ELV_UR100_PID      0xFB58  /* USB-RS232-Umsetzer (UR 100) */
 514 #define FTDI_ELV_UM100_PID      0xFB5A  /* USB-Modul UM 100 */
 515 #define FTDI_ELV_UO100_PID      0xFB5B  /* USB-Modul UO 100 */
 516 #define FTDI_ELV_ALC8500_PID    0xF06E  /* ALC 8500 Expert */
 517 /* Additional ELV PIDs that default to using the FTDI D2XX drivers on
 518  * MS Windows, rather than the FTDI Virtual Com Port drivers.
 519  * Maybe these will be easier to use with the libftdi/libusb user-space
 520  * drivers, or possibly the Comedi drivers in some cases. */
 521 #define FTDI_ELV_CLI7000_PID    0xFB59  /* Computer-Light-Interface (CLI 7000) */
 522 #define FTDI_ELV_PPS7330_PID    0xFB5C  /* Processor-Power-Supply (PPS 7330) */
 523 #define FTDI_ELV_TFM100_PID     0xFB5D  /* Temperartur-Feuchte Messgeraet (TFM 100) */
 524 #define FTDI_ELV_UDF77_PID      0xFB5E  /* USB DCF Funkurh (UDF 77) */
 525 #define FTDI_ELV_UIO88_PID      0xFB5F  /* USB-I/O Interface (UIO 88) */
 526 #define FTDI_ELV_UAD8_PID       0xF068  /* USB-AD-Wandler (UAD 8) */
 527 #define FTDI_ELV_UDA7_PID       0xF069  /* USB-DA-Wandler (UDA 7) */
 528 #define FTDI_ELV_USI2_PID       0xF06A  /* USB-Schrittmotoren-Interface (USI 2) */
 529 #define FTDI_ELV_T1100_PID      0xF06B  /* Thermometer (T 1100) */
 530 #define FTDI_ELV_PCD200_PID     0xF06C  /* PC-Datenlogger (PCD 200) */
 531 #define FTDI_ELV_ULA200_PID     0xF06D  /* USB-LCD-Ansteuerung (ULA 200) */
 532 #define FTDI_ELV_FHZ1000PC_PID  0xF06F  /* FHZ 1000 PC */
 533 #define FTDI_ELV_CSI8_PID       0xE0F0  /* Computer-Schalt-Interface (CSI 8) */
 534 #define FTDI_ELV_EM1000DL_PID   0xE0F1  /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */
 535 #define FTDI_ELV_PCK100_PID     0xE0F2  /* PC-Kabeltester (PCK 100) */
 536 #define FTDI_ELV_RFP500_PID     0xE0F3  /* HF-Leistungsmesser (RFP 500) */
 537 #define FTDI_ELV_FS20SIG_PID    0xE0F4  /* Signalgeber (FS 20 SIG) */
 538 #define FTDI_ELV_WS300PC_PID    0xE0F6  /* PC-Wetterstation (WS 300 PC) */
 539 #define FTDI_ELV_FHZ1300PC_PID  0xE0E8  /* FHZ 1300 PC */
 540 #define FTDI_ELV_WS500_PID      0xE0E9  /* PC-Wetterstation (WS 500) */
 541 #define FTDI_ELV_HS485_PID      0xE0EA  /* USB to RS-485 adapter */
 542 #define FTDI_ELV_EM1010PC_PID   0xE0EF  /* Engery monitor EM 1010 PC */
 543 #define FTDI_PHI_FISCO_PID      0xE40B  /* PHI Fisco USB to Serial cable */
 544
 545 /*
 546  * Definitions for ID TECH (www.idt-net.com) devices
 547  */
 548 #define IDTECH_VID              0x0ACD  /* ID TECH Vendor ID */
 549 #define IDTECH_IDT1221U_PID     0x0300  /* IDT1221U USB to RS-232 adapter */
 550
 551 /*
 552  * Definitions for Omnidirectional Control Technology, Inc. devices
 553  */
 554 #define OCT_VID                 0x0B39  /* OCT vendor ID */
 555 /* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */
 556 /* Also rebadged as Dick Smith Electronics (Aus) XH6451 */
 557 /* Also rebadged as SIIG Inc. model US2308 hardware version 1 */
 558 #define OCT_US101_PID           0x0421  /* OCT US101 USB to RS-232 */
 559
 560 /* an infrared receiver for user access control with IR tags */
 561 #define FTDI_PIEGROUP_PID       0xF208  /* Product Id */
 562
 563 /*
 564  * Definitions for Artemis astronomical USB based cameras
 565  * Check it at http://www.artemisccd.co.uk/
 566  */
 567 #define FTDI_ARTEMIS_PID        0xDF28  /* All Artemis Cameras */
 568
 569 /*
 570  * Definitions for ATIK Instruments astronomical USB based cameras
 571  * Check it at http://www.atik-instruments.com/
 572  */
 573 #define FTDI_ATIK_ATK16_PID     0xDF30  /* ATIK ATK-16 Grayscale Camera */
 574 #define FTDI_ATIK_ATK16C_PID    0xDF32  /* ATIK ATK-16C Colour Camera */
 575 #define FTDI_ATIK_ATK16HR_PID   0xDF31  /* ATIK ATK-16HR Grayscale Camera */
 576 #define FTDI_ATIK_ATK16HRC_PID  0xDF33  /* ATIK ATK-16HRC Colour Camera */
 577 #define FTDI_ATIK_ATK16IC_PID   0xDF35  /* ATIK ATK-16IC Grayscale Camera */
 578
 579 /*
 580  * Protego product ids
 581  */
 582 #define PROTEGO_SPECIAL_1       0xFC70  /* special/unknown device */
 583 #define PROTEGO_R2X0            0xFC71  /* R200-USB TRNG unit (R210, R220, and R230) */
 584 #define PROTEGO_SPECIAL_3       0xFC72  /* special/unknown device */
 585 #define PROTEGO_SPECIAL_4       0xFC73  /* special/unknown device */
 586
 587 /*
 588  * Gude Analog- und Digitalsysteme GmbH
 589  */
 590 #define FTDI_GUDEADS_E808_PID    0xE808
 591 #define FTDI_GUDEADS_E809_PID    0xE809
 592 #define FTDI_GUDEADS_E80A_PID    0xE80A
 593 #define FTDI_GUDEADS_E80B_PID    0xE80B
 594 #define FTDI_GUDEADS_E80C_PID    0xE80C
 595 #define FTDI_GUDEADS_E80D_PID    0xE80D
 596 #define FTDI_GUDEADS_E80E_PID    0xE80E
 597 #define FTDI_GUDEADS_E80F_PID    0xE80F
 598 #define FTDI_GUDEADS_E888_PID    0xE888  /* Expert ISDN Control USB */
 599 #define FTDI_GUDEADS_E889_PID    0xE889  /* USB RS-232 OptoBridge */
 600 #define FTDI_GUDEADS_E88A_PID    0xE88A
 601 #define FTDI_GUDEADS_E88B_PID    0xE88B
 602 #define FTDI_GUDEADS_E88C_PID    0xE88C
 603 #define FTDI_GUDEADS_E88D_PID    0xE88D
 604 #define FTDI_GUDEADS_E88E_PID    0xE88E
 605 #define FTDI_GUDEADS_E88F_PID    0xE88F
 606
 607 /*
 608  * Linx Technologies product ids
 609  */
 610 #define LINX_SDMUSBQSS_PID      0xF448  /* Linx SDM-USB-QS-S */
 611 #define LINX_MASTERDEVEL2_PID   0xF449   /* Linx Master Development 2.0 */
 612 #define LINX_FUTURE_0_PID   0xF44A   /* Linx future device */
 613 #define LINX_FUTURE_1_PID   0xF44B   /* Linx future device */
 614 #define LINX_FUTURE_2_PID   0xF44C   /* Linx future device */
 615
 616 /* CCS Inc. ICDU/ICDU40 product ID - the FT232BM is used in an in-circuit-debugger */
 617 /* unit for PIC16's/PIC18's */
 618 #define FTDI_CCSICDU20_0_PID    0xF9D0
 619 #define FTDI_CCSICDU40_1_PID    0xF9D1
 620 #define FTDI_CCSMACHX_2_PID     0xF9D2
 621 #define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3
 622 #define FTDI_CCSICDU64_4_PID    0xF9D4
 623 #define FTDI_CCSPRIME8_5_PID    0xF9D5
 624
 625 /* Inside Accesso contactless reader (http://www.insidefr.com) */
 626 #define INSIDE_ACCESSO          0xFAD0
 627
 628 /*
 629  * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI
 630  */
 631 #define INTREPID_VID            0x093C
 632 #define INTREPID_VALUECAN_PID   0x0601
 633 #define INTREPID_NEOVI_PID      0x0701
 634
 635 /*
 636  * Falcom Wireless Communications GmbH
 637  */
 638 #define FALCOM_VID              0x0F94  /* Vendor Id */
 639 #define FALCOM_TWIST_PID        0x0001  /* Falcom Twist USB GPRS modem */
 640 #define FALCOM_SAMBA_PID        0x0005  /* Falcom Samba USB GPRS modem */
 641
 642 /*
 643  * SUUNTO product ids
 644  */
 645 #define FTDI_SUUNTO_SPORTS_PID  0xF680  /* Suunto Sports instrument */
 646
 647 /*
 648  * Oceanic product ids
 649  */
 650 #define FTDI_OCEANIC_PID        0xF460  /* Oceanic dive instrument */
 651
 652 /*
 653  * TTi (Thurlby Thandar Instruments)
 654  */
 655 #define TTI_VID                 0x103E  /* Vendor Id */
 656 #define TTI_QL355P_PID          0x03E8  /* TTi QL355P power supply */
 657
 658 /*
 659  * Definitions for B&B Electronics products.
 660  */
 661 #define BANDB_VID               0x0856  /* B&B Electronics Vendor ID */
 662 #define BANDB_USOTL4_PID        0xAC01  /* USOTL4 Isolated RS-485 Converter */
 663 #define BANDB_USTL4_PID         0xAC02  /* USTL4 RS-485 Converter */
 664 #define BANDB_USO9ML2_PID       0xAC03  /* USO9ML2 Isolated RS-232 Converter */
 665
 666 /*
 667  * RM Michaelides CANview USB (http://www.rmcan.com)
 668  * CAN fieldbus interface adapter, added by port GmbH www.port.de)
 669  * Ian Abbott changed the macro names for consistency.
 670  */
 671 #define FTDI_RM_CANVIEW_PID     0xfd60  /* Product Id */
 672
 673 /*
 674  * EVER Eco Pro UPS (http://www.ever.com.pl/)
 675  */
 676
 677 #define EVER_ECO_PRO_CDS        0xe520  /* RS-232 converter */
 678
 679 /*
 680  * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485,
 681  * USB-TTY activ, USB-TTY passiv.  Some PIDs are used by several devices
 682  * and I'm not entirely sure which are used by which.
 683  */
 684 #define FTDI_4N_GALAXY_DE_1_PID 0xF3C0
 685 #define FTDI_4N_GALAXY_DE_2_PID 0xF3C1
 686
 687 /*
 688  * Mobility Electronics products.
 689  */
 690 #define MOBILITY_VID                    0x1342
 691 #define MOBILITY_USB_SERIAL_PID         0x0202  /* EasiDock USB 200 serial */
 692
 693 /*
 694  * microHAM product IDs (http://www.microham.com).
 695  * Submitted by Justin Burket (KL1RL) <zorton@jtan.com>
 696  * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>.
 697  * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file.
 698  */
 699 #define FTDI_MHAM_KW_PID 0xEEE8         /* USB-KW interface */
 700 #define FTDI_MHAM_YS_PID 0xEEE9         /* USB-YS interface */
 701 #define FTDI_MHAM_Y6_PID 0xEEEA         /* USB-Y6 interface */
 702 #define FTDI_MHAM_Y8_PID 0xEEEB         /* USB-Y8 interface */
 703 #define FTDI_MHAM_IC_PID 0xEEEC         /* USB-IC interface */
 704 #define FTDI_MHAM_DB9_PID 0xEEED        /* USB-DB9 interface */
 705 #define FTDI_MHAM_RS232_PID 0xEEEE      /* USB-RS232 interface */
 706 #define FTDI_MHAM_Y9_PID 0xEEEF         /* USB-Y9 interface */
 707
 708 /*
 709  * Active Robots product ids.
 710  */
 711 #define FTDI_ACTIVE_ROBOTS_PID  0xE548  /* USB comms board */
 712
 713 /*
 714  * Xsens Technologies BV products (http://www.xsens.com).
 715  */
 716 #define XSENS_CONVERTER_0_PID   0xD388
 717 #define XSENS_CONVERTER_1_PID   0xD389
 718 #define XSENS_CONVERTER_2_PID   0xD38A
 719 #define XSENS_CONVERTER_3_PID   0xD38B
 720 #define XSENS_CONVERTER_4_PID   0xD38C
 721 #define XSENS_CONVERTER_5_PID   0xD38D
 722 #define XSENS_CONVERTER_6_PID   0xD38E
 723 #define XSENS_CONVERTER_7_PID   0xD38F
 724
 725 /*
 726  * Teratronik product ids.
 727  * Submitted by O. Wölfelschneider.
 728  */
 729 #define FTDI_TERATRONIK_VCP_PID  0xEC88 /* Teratronik device (preferring VCP driver on windows) */
 730 #define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */
 731
 732 /*
 733  * Evolution Robotics products (http://www.evolution.com/).
 734  * Submitted by Shawn M. Lavelle.
 735  */
 736 #define EVOLUTION_VID           0xDEEE  /* Vendor ID */
 737 #define EVOLUTION_ER1_PID       0x0300  /* ER1 Control Module */
 738 #define EVO_8U232AM_PID 0x02FF  /* Evolution robotics RCM2 (FT232AM)*/
 739 #define EVO_HYBRID_PID          0x0302  /* Evolution robotics RCM4 PID (FT232BM)*/
 740 #define EVO_RCM4_PID            0x0303  /* Evolution robotics RCM4 PID */
 741
 742 /* Pyramid Computer GmbH */
 743 #define FTDI_PYRAMID_PID        0xE6C8  /* Pyramid Appliance Display */
 744
 745 /*
 746  * NDI (www.ndigital.com) product ids
 747  */
 748 #define FTDI_NDI_HUC_PID                0xDA70  /* NDI Host USB Converter */
 749 #define FTDI_NDI_SPECTRA_SCU_PID        0xDA71  /* NDI Spectra SCU */
 750 #define FTDI_NDI_FUTURE_2_PID           0xDA72  /* NDI future device #2 */
 751 #define FTDI_NDI_FUTURE_3_PID           0xDA73  /* NDI future device #3 */
 752 #define FTDI_NDI_AURORA_SCU_PID         0xDA74  /* NDI Aurora SCU */
 753
 754 /*
 755  * Posiflex inc retail equipment (http://www.posiflex.com.tw)
 756  */
 757 #define POSIFLEX_VID            0x0d3a  /* Vendor ID */
 758 #define POSIFLEX_PP7000_PID     0x0300  /* PP-7000II thermal printer */
 759
 760 /*
 761  * Westrex International devices submitted by Cory Lee
 762  */
 763 #define FTDI_WESTREX_MODEL_777_PID      0xDC00  /* Model 777 */
 764 #define FTDI_WESTREX_MODEL_8900F_PID    0xDC01  /* Model 8900F */
 765
 766 /*
 767  * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com)
 768  */
 769 #define FTDI_RRCIRKITS_LOCOBUFFER_PID   0xc7d0  /* LocoBuffer USB */
 770
 771 /*
 772  * Eclo (http://www.eclo.pt/) product IDs.
 773  * PID 0xEA90 submitted by Martin Grill.
 774  */
 775 #define FTDI_ECLO_COM_1WIRE_PID 0xEA90  /* COM to 1-Wire USB adaptor */
 776
 777 /*
 778  * Papouch products (http://www.papouch.com/)
 779  * Submitted by Folkert van Heusden
 780  */
 781
 782 #define PAPOUCH_VID                     0x5050  /* Vendor ID */
 783 #define PAPOUCH_TMU_PID                 0x0400  /* TMU USB Thermometer */
 784 #define PAPOUCH_QUIDO4x4_PID            0x0900  /* Quido 4/4 Module */
 785
 786 /*
 787  * ACG Identification Technologies GmbH products (http://www.acg.de/).
 788  * Submitted by anton -at- goto10 -dot- org.
 789  */
 790 #define FTDI_ACG_HFDUAL_PID             0xDD20  /* HF Dual ISO Reader (RFID) */
 791
 792 /*
 793  * Yost Engineering, Inc. products (www.yostengineering.com).
 794  * PID 0xE050 submitted by Aaron Prose.
 795  */
 796 #define FTDI_YEI_SERVOCENTER31_PID      0xE050  /* YEI ServoCenter3.1 USB */
 797
 798 /*
 799  * ThorLabs USB motor drivers
 800  */
 801 #define FTDI_THORLABS_PID               0xfaf0 /* ThorLabs USB motor drivers */
 802
 803 /*
 804  * Testo products (http://www.testo.com/)
 805  * Submitted by Colin Leroy
 806  */
 807 #define TESTO_VID                       0x128D
 808 #define TESTO_USB_INTERFACE_PID         0x0001
 809
 810 /*
 811  * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com.
 812  */
 813 #define FTDI_GAMMA_SCOUT_PID            0xD678  /* Gamma Scout online */
 814
 815 /*
 816  * Tactrix OpenPort (ECU) devices.
 817  * OpenPort 1.3M submitted by Donour Sizemore.
 818  * OpenPort 1.3S and 1.3U submitted by Ian Abbott.
 819  */
 820 #define FTDI_TACTRIX_OPENPORT_13M_PID   0xCC48  /* OpenPort 1.3 Mitsubishi */
 821 #define FTDI_TACTRIX_OPENPORT_13S_PID   0xCC49  /* OpenPort 1.3 Subaru */
 822 #define FTDI_TACTRIX_OPENPORT_13U_PID   0xCC4A  /* OpenPort 1.3 Universal */
 823
 824 /*
 825  * Telldus Technologies
 826  */
 827 #define TELLDUS_VID                     0x1781  /* Vendor ID */
 828 #define TELLDUS_TELLSTICK_PID           0x0C30  /* RF control dongle 433 MHz using FT232RL */
 829
 830 /*
 831  * IBS elektronik product ids
 832  * Submitted by Thomas Schleusener
 833  */
 834 #define FTDI_IBS_US485_PID      0xff38  /* IBS US485 (USB<-->RS422/485 interface) */
 835 #define FTDI_IBS_PICPRO_PID     0xff39  /* IBS PIC-Programmer */
 836 #define FTDI_IBS_PCMCIA_PID     0xff3a  /* IBS Card reader for PCMCIA SRAM-cards */
 837 #define FTDI_IBS_PK1_PID        0xff3b  /* IBS PK1 - Particel counter */
 838 #define FTDI_IBS_RS232MON_PID   0xff3c  /* IBS RS232 - Monitor */
 839 #define FTDI_IBS_APP70_PID      0xff3d  /* APP 70 (dust monitoring system) */
 840 #define FTDI_IBS_PEDO_PID       0xff3e  /* IBS PEDO-Modem (RF modem 868.35 MHz) */
 841 #define FTDI_IBS_PROD_PID       0xff3f  /* future device */
 842
 843 /*
 844  *  MaxStream devices   www.maxstream.net
 845  */
 846 #define FTDI_MAXSTREAM_PID      0xEE18  /* Xbee PKG-U Module */
 847
 848 /* Olimex */
 849 #define OLIMEX_VID                      0x15BA
 850 #define OLIMEX_ARM_USB_OCD_PID          0x0003
 851
 852 /* Luminary Micro Stellaris Boards, VID = FTDI_VID */
 853 /* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */
 854 #define LMI_LM3S_DEVEL_BOARD_PID        0xbcd8
 855 #define LMI_LM3S_EVAL_BOARD_PID         0xbcd9
 856
 857 /* www.elsterelectricity.com Elster Unicom III Optical Probe */
 858 #define FTDI_ELSTER_UNICOM_PID          0xE700 /* Product Id */
 859
 860 /*
 861  * The Mobility Lab (TML)
 862  * Submitted by Pierre Castella
 863  */
 864 #define TML_VID                 0x1B91  /* Vendor ID */
 865 #define TML_USB_SERIAL_PID      0x0064  /* USB - Serial Converter */
 866
 867 /* Propox devices */
 868 #define FTDI_PROPOX_JTAGCABLEII_PID     0xD738
 869
 870 /* Rig Expert Ukraine devices */
 871 #define FTDI_REU_TINY_PID               0xED22  /* RigExpert Tiny */
 872
 873 /* Domintell products  http://www.domintell.com */
 874 #define FTDI_DOMINTELL_DGQG_PID 0xEF50  /* Master */
 875 #define FTDI_DOMINTELL_DUSB_PID 0xEF51  /* DUSB01 module */
 876
 877 /* Alti-2 products  http://www.alti-2.com */
 878 #define ALTI2_VID       0x1BC9
 879 #define ALTI2_N3_PID    0x6001  /* Neptune 3 */
 880
 881 /* Commands */
 882 #define FTDI_SIO_RESET          0 /* Reset the port */
 883 #define FTDI_SIO_MODEM_CTRL     1 /* Set the modem control register */
 884 #define FTDI_SIO_SET_FLOW_CTRL  2 /* Set flow control register */
 885 #define FTDI_SIO_SET_BAUD_RATE  3 /* Set baud rate */
 886 #define FTDI_SIO_SET_DATA       4 /* Set the data characteristics of the port */
 887 #define FTDI_SIO_GET_MODEM_STATUS       5 /* Retrieve current value of modern status register */
 888 #define FTDI_SIO_SET_EVENT_CHAR 6 /* Set the event character */
 889 #define FTDI_SIO_SET_ERROR_CHAR 7 /* Set the error character */
 890 #define FTDI_SIO_SET_LATENCY_TIMER      9 /* Set the latency timer */
 891 #define FTDI_SIO_GET_LATENCY_TIMER      10 /* Get the latency timer */
 892
 893 /* Interface indicies for FT2232, FT2232H and FT4232H devices*/
 894 #define INTERFACE_A             1
 895 #define INTERFACE_B             2
 896 #define INTERFACE_C             3
 897 #define INTERFACE_D             4
 898
 899 /*
 900  * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3
 901  * Submitted by Harald Welte <laforge@openmoko.org>
 902  */
 903 #define FIC_VID                 0x1457
 904 #define FIC_NEO1973_DEBUG_PID   0x5118
 905
 906 /*
 907  * RATOC REX-USB60F
 908  */
 909 #define RATOC_VENDOR_ID         0x0584
 910 #define RATOC_PRODUCT_ID_USB60F 0xb020
 911
 912 /*
 913  * DIEBOLD BCS SE923
 914  */
 915 #define DIEBOLD_BCS_SE923_PID   0xfb99
 916
 917 /*
 918  * Atmel STK541
 919  */
 920 #define ATMEL_VID               0x03eb /* Vendor ID */
 921 #define STK541_PID              0x2109 /* Zigbee Controller */
 922
 923 /*
 924  * Dresden Elektronic Sensor Terminal Board
 925  */
 926 #define DE_VID                  0x1cf1 /* Vendor ID */
 927 #define STB_PID                 0x0001 /* Sensor Terminal Board */
 928 #define WHT_PID                 0x0004 /* Wireless Handheld Terminal */
 929
 930 /*
 931  * Blackfin gnICE JTAG
 932  * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice
 933  */
 934 #define ADI_VID                 0x0456
 935 #define ADI_GNICE_PID           0xF000
 936 #define ADI_GNICEPLUS_PID       0xF001
 937
 938 /*
 939  * JETI SPECTROMETER SPECBOS 1201
 940  * http://www.jeti.com/products/sys/scb/scb1201.php
 941  */
 942 #define JETI_VID                0x0c6c
 943 #define JETI_SPC1201_PID        0x04b2
 944
 945 /*
 946  * Marvell SheevaPlug
 947  */
 948 #define MARVELL_VID             0x9e88
 949 #define MARVELL_SHEEVAPLUG_PID  0x9e8f
 950
 951 #define FTDI_TURTELIZER_PID     0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */
 952
 953 /*
 954  * GN Otometrics (http://www.otometrics.com)
 955  * Submitted by Ville Sundberg.
 956  */
 957 #define GN_OTOMETRICS_VID       0x0c33  /* Vendor ID */
 958 #define AURICAL_USB_PID         0x0010  /* Aurical USB Audiometer */
 959
 960 /*
 961  * Bayer Ascensia Contour blood glucose meter USB-converter cable.
 962  * http://winglucofacts.com/cables/
 963  */
 964 #define BAYER_VID                      0x1A79
 965 #define BAYER_CONTOUR_CABLE_PID        0x6001
 966
 967 /*
 968  * Marvell OpenRD Base, Client
 969  * http://www.open-rd.org
 970  * OpenRD Base, Client use VID 0x0403
 971  */
 972 #define MARVELL_OPENRD_PID      0x9e90
 973
 974 /*
 975  * Hameg HO820 and HO870 interface (using VID 0x0403)
 976  */
 977 #define        HAMEG_HO820_PID         0xed74
 978 #define        HAMEG_HO870_PID         0xed71
 979
 980 /*
 981  *   BmRequestType:  1100 0000b
 982  *   bRequest:       FTDI_E2_READ
 983  *   wValue:         0
 984  *   wIndex:         Address of word to read
 985  *   wLength:        2
 986  *   Data:           Will return a word of data from E2Address
 987  *
 988  */
 989
 990 /* Port Identifier Table */
 991 #define PIT_DEFAULT             0 /* SIOA */
 992 #define PIT_SIOA                1 /* SIOA */
 993 /* The device this driver is tested with one has only one port */
 994 #define PIT_SIOB                2 /* SIOB */
 995 #define PIT_PARALLEL            3 /* Parallel */
 996
 997 /* FTDI_SIO_RESET */
 998 #define FTDI_SIO_RESET_REQUEST FTDI_SIO_RESET
 999 #define FTDI_SIO_RESET_REQUEST_TYPE 0x40
1000 #define FTDI_SIO_RESET_SIO 0
1001 #define FTDI_SIO_RESET_PURGE_RX 1
1002 #define FTDI_SIO_RESET_PURGE_TX 2
1003
1004 /*
1005  * BmRequestType:  0100 0000B
1006  * bRequest:       FTDI_SIO_RESET
1007  * wValue:         Control Value
1008  *                   0 = Reset SIO
1009  *                   1 = Purge RX buffer
1010  *                   2 = Purge TX buffer
1011  * wIndex:         Port
1012  * wLength:        0
1013  * Data:           None
1014  *
1015  * The Reset SIO command has this effect:
1016  *
1017  *    Sets flow control set to 'none'
1018  *    Event char = $0D
1019  *    Event trigger = disabled
1020  *    Purge RX buffer
1021  *    Purge TX buffer
1022  *    Clear DTR
1023  *    Clear RTS
1024  *    baud and data format not reset
1025  *
1026  * The Purge RX and TX buffer commands affect nothing except the buffers
1027  *
1028    */
1029
1030 /* FTDI_SIO_SET_BAUDRATE */
1031 #define FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE 0x40
1032 #define FTDI_SIO_SET_BAUDRATE_REQUEST 3
1033
1034 /*
1035  * BmRequestType:  0100 0000B
1036  * bRequest:       FTDI_SIO_SET_BAUDRATE
1037  * wValue:         BaudDivisor value - see below
1038  * wIndex:         Port
1039  * wLength:        0
1040  * Data:           None
1041  * The BaudDivisor values are calculated as follows:
1042  * - BaseClock is either 12000000 or 48000000 depending on the device. FIXME: I wish
1043  *   I knew how to detect old chips to select proper base clock!
1044  * - BaudDivisor is a fixed point number encoded in a funny way.
1045  *   (--WRONG WAY OF THINKING--)
1046  *   BaudDivisor is a fixed point number encoded with following bit weighs:
1047  *   (-2)(-1)(13..0). It is a radical with a denominator of 4, so values
1048  *   end with 0.0 (00...), 0.25 (10...), 0.5 (01...), and 0.75 (11...).
1049  *   (--THE REALITY--)
1050  *   The both-bits-set has quite different meaning from 0.75 - the chip designers
1051  *   have decided it to mean 0.125 instead of 0.75.
1052  *   This info looked up in FTDI application note "FT8U232 DEVICES \ Data Rates
1053  *   and Flow Control Consideration for USB to RS232".
1054  * - BaudDivisor = (BaseClock / 16) / BaudRate, where the (=) operation should
1055  *   automagically re-encode the resulting value to take fractions into consideration.
1056  * As all values are integers, some bit twiddling is in order:
1057  *   BaudDivisor = (BaseClock / 16 / BaudRate) |
1058  *   (((BaseClock / 2 / BaudRate) & 4) ? 0x4000    // 0.5
1059  *    : ((BaseClock / 2 / BaudRate) & 2) ? 0x8000  // 0.25
1060  *    : ((BaseClock / 2 / BaudRate) & 1) ? 0xc000  // 0.125
1061  *    : 0)
1062  *
1063  * For the FT232BM, a 17th divisor bit was introduced to encode the multiples
1064  * of 0.125 missing from the FT8U232AM.  Bits 16 to 14 are coded as follows
1065  * (the first four codes are the same as for the FT8U232AM, where bit 16 is
1066  * always 0):
1067  *   000 - add .000 to divisor
1068  *   001 - add .500 to divisor
1069  *   010 - add .250 to divisor
1070  *   011 - add .125 to divisor
1071  *   100 - add .375 to divisor
1072  *   101 - add .625 to divisor
1073  *   110 - add .750 to divisor
1074  *   111 - add .875 to divisor
1075  * Bits 15 to 0 of the 17-bit divisor are placed in the urb value.  Bit 16 is
1076  * placed in bit 0 of the urb index.
1077  *
1078  * Note that there are a couple of special cases to support the highest baud
1079  * rates.  If the calculated divisor value is 1, this needs to be replaced with
1080  * 0.  Additionally for the FT232BM, if the calculated divisor value is 0x4001
1081  * (1.5), this needs to be replaced with 0x0001 (1) (but this divisor value is
1082  * not supported by the FT8U232AM).
1083  */
1084
1085 typedef enum {
1086         SIO = 1,
1087         FT8U232AM = 2,
1088         FT232BM = 3,
1089         FT2232C = 4,
1090         FT232RL = 5,
1091         FT2232H = 6,
1092         FT4232H = 7
1093 } ftdi_chip_type_t;
1094
1095 typedef enum {
1096  ftdi_sio_b300 = 0,
1097  ftdi_sio_b600 = 1,
1098  ftdi_sio_b1200 = 2,
1099  ftdi_sio_b2400 = 3,
1100  ftdi_sio_b4800 = 4,
1101  ftdi_sio_b9600 = 5,
1102  ftdi_sio_b19200 = 6,
1103  ftdi_sio_b38400 = 7,
1104  ftdi_sio_b57600 = 8,
1105  ftdi_sio_b115200 = 9
1106 } FTDI_SIO_baudrate_t;
1107
1108 /*
1109  * The ftdi_8U232AM_xxMHz_byyy constants have been removed. The encoded divisor values
1110  * are calculated internally.
1111  */
1112
1113 #define FTDI_SIO_SET_DATA_REQUEST FTDI_SIO_SET_DATA
1114 #define FTDI_SIO_SET_DATA_REQUEST_TYPE 0x40
1115 #define FTDI_SIO_SET_DATA_PARITY_NONE (0x0 << 8)
1116 #define FTDI_SIO_SET_DATA_PARITY_ODD (0x1 << 8)
1117 #define FTDI_SIO_SET_DATA_PARITY_EVEN (0x2 << 8)
1118 #define FTDI_SIO_SET_DATA_PARITY_MARK (0x3 << 8)
1119 #define FTDI_SIO_SET_DATA_PARITY_SPACE (0x4 << 8)
1120 #define FTDI_SIO_SET_DATA_STOP_BITS_1 (0x0 << 11)
1121 #define FTDI_SIO_SET_DATA_STOP_BITS_15 (0x1 << 11)
1122 #define FTDI_SIO_SET_DATA_STOP_BITS_2 (0x2 << 11)
1123 #define FTDI_SIO_SET_BREAK (0x1 << 14)
1124 /* FTDI_SIO_SET_DATA */
1125
1126 /*
1127  * BmRequestType:  0100 0000B
1128  * bRequest:       FTDI_SIO_SET_DATA
1129  * wValue:         Data characteristics (see below)
1130  * wIndex:         Port
1131  * wLength:        0
1132  * Data:           No
1133  *
1134  * Data characteristics
1135  *
1136  *   B0..7   Number of data bits
1137  *   B8..10  Parity
1138  *           0 = None
1139  *           1 = Odd
1140  *           2 = Even
1141  *           3 = Mark
1142  *           4 = Space
1143  *   B11..13 Stop Bits
1144  *           0 = 1
1145  *           1 = 1.5
1146  *           2 = 2
1147  *   B14
1148  *           1 = TX ON (break)
1149  *           0 = TX OFF (normal state)
1150  *   B15 Reserved
1151  *
1152  */
1153
1154
1155
1156 /* FTDI_SIO_MODEM_CTRL */
1157 #define FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE 0x40
1158 #define FTDI_SIO_SET_MODEM_CTRL_REQUEST FTDI_SIO_MODEM_CTRL
1159
1160 /*
1161  * BmRequestType:   0100 0000B
1162  * bRequest:        FTDI_SIO_MODEM_CTRL
1163  * wValue:          ControlValue (see below)
1164  * wIndex:          Port
1165  * wLength:         0
1166  * Data:            None
1167  *
1168  * NOTE: If the device is in RTS/CTS flow control, the RTS set by this
1169  * command will be IGNORED without an error being returned
1170  * Also - you can not set DTR and RTS with one control message
1171  */
1172
1173 #define FTDI_SIO_SET_DTR_MASK 0x1
1174 #define FTDI_SIO_SET_DTR_HIGH (1 | (FTDI_SIO_SET_DTR_MASK  << 8))
1175 #define FTDI_SIO_SET_DTR_LOW  (0 | (FTDI_SIO_SET_DTR_MASK  << 8))
1176 #define FTDI_SIO_SET_RTS_MASK 0x2
1177 #define FTDI_SIO_SET_RTS_HIGH (2 | (FTDI_SIO_SET_RTS_MASK << 8))
1178 #define FTDI_SIO_SET_RTS_LOW (0 | (FTDI_SIO_SET_RTS_MASK << 8))
1179
1180 /*
1181  * ControlValue
1182  * B0    DTR state
1183  *          0 = reset
1184  *          1 = set
1185  * B1    RTS state
1186  *          0 = reset
1187  *          1 = set
1188  * B2..7 Reserved
1189  * B8    DTR state enable
1190  *          0 = ignore
1191  *          1 = use DTR state
1192  * B9    RTS state enable
1193  *          0 = ignore
1194  *          1 = use RTS state
1195  * B10..15 Reserved
1196  */
1197
1198 /* FTDI_SIO_SET_FLOW_CTRL */
1199 #define FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE 0x40
1200 #define FTDI_SIO_SET_FLOW_CTRL_REQUEST FTDI_SIO_SET_FLOW_CTRL
1201 #define FTDI_SIO_DISABLE_FLOW_CTRL 0x0
1202 #define FTDI_SIO_RTS_CTS_HS (0x1 << 8)
1203 #define FTDI_SIO_DTR_DSR_HS (0x2 << 8)
1204 #define FTDI_SIO_XON_XOFF_HS (0x4 << 8)
1205 /*
1206  *   BmRequestType:  0100 0000b
1207  *   bRequest:       FTDI_SIO_SET_FLOW_CTRL
1208  *   wValue:         Xoff/Xon
1209  *   wIndex:         Protocol/Port - hIndex is protocl / lIndex is port
1210  *   wLength:        0
1211  *   Data:           None
1212  *
1213  * hIndex protocol is:
1214  *   B0 Output handshaking using RTS/CTS
1215  *       0 = disabled
1216  *       1 = enabled
1217  *   B1 Output handshaking using DTR/DSR
1218  *       0 = disabled
1219  *       1 = enabled
1220  *   B2 Xon/Xoff handshaking
1221  *       0 = disabled
1222  *       1 = enabled
1223  *
1224  * A value of zero in the hIndex field disables handshaking
1225  *
1226  * If Xon/Xoff handshaking is specified, the hValue field should contain the XOFF character
1227  * and the lValue field contains the XON character.
1228  */
1229
1230 /*
1231  * FTDI_SIO_GET_LATENCY_TIMER
1232  *
1233  * Set the timeout interval. The FTDI collects data from the slave
1234  * device, transmitting it to the host when either A) 62 bytes are
1235  * received, or B) the timeout interval has elapsed and the buffer
1236  * contains at least 1 byte.  Setting this value to a small number
1237  * can dramatically improve performance for applications which send
1238  * small packets, since the default value is 16ms.
1239  */
1240 #define  FTDI_SIO_GET_LATENCY_TIMER_REQUEST FTDI_SIO_GET_LATENCY_TIMER
1241 #define  FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE 0xC0
1242
1243 /*
1244  *  BmRequestType:   1100 0000b
1245  *  bRequest:        FTDI_SIO_GET_LATENCY_TIMER
1246  *  wValue:          0
1247  *  wIndex:          Port
1248  *  wLength:         0
1249  *  Data:            latency (on return)
1250  */
1251
1252 /*
1253  * FTDI_SIO_SET_LATENCY_TIMER
1254  *
1255  * Set the timeout interval. The FTDI collects data from the slave
1256  * device, transmitting it to the host when either A) 62 bytes are
1257  * received, or B) the timeout interval has elapsed and the buffer
1258  * contains at least 1 byte.  Setting this value to a small number
1259  * can dramatically improve performance for applications which send
1260  * small packets, since the default value is 16ms.
1261  */
1262 #define  FTDI_SIO_SET_LATENCY_TIMER_REQUEST FTDI_SIO_SET_LATENCY_TIMER
1263 #define  FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE 0x40
1264
1265 /*
1266  *  BmRequestType:   0100 0000b
1267  *  bRequest:        FTDI_SIO_SET_LATENCY_TIMER
1268  *  wValue:          Latency (milliseconds)
1269  *  wIndex:          Port
1270  *  wLength:         0
1271  *  Data:            None
1272  *
1273  * wValue:
1274  *   B0..7   Latency timer
1275  *   B8..15  0
1276  *
1277  */
1278
1279 /*
1280  * FTDI_SIO_SET_EVENT_CHAR
1281  *
1282  * Set the special event character for the specified communications port.
1283  * If the device sees this character it will immediately return the
1284  * data read so far - rather than wait 40ms or until 62 bytes are read
1285  * which is what normally happens.
1286  */
1287
1288
1289 #define  FTDI_SIO_SET_EVENT_CHAR_REQUEST FTDI_SIO_SET_EVENT_CHAR
1290 #define  FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE 0x40
1291
1292
1293 /*
1294  *  BmRequestType:   0100 0000b
1295  *  bRequest:        FTDI_SIO_SET_EVENT_CHAR
1296  *  wValue:          EventChar
1297  *  wIndex:          Port
1298  *  wLength:         0
1299  *  Data:            None
1300  *
1301  * wValue:
1302  *   B0..7   Event Character
1303  *   B8      Event Character Processing
1304  *             0 = disabled
1305  *             1 = enabled
1306  *   B9..15  Reserved
1307  *
1308  */
1309
1310 /* FTDI_SIO_SET_ERROR_CHAR */
1311
1312 /* Set the parity error replacement character for the specified communications port */
1313
1314 /*
1315  *  BmRequestType:  0100 0000b
1316  *  bRequest:       FTDI_SIO_SET_EVENT_CHAR
1317  *  wValue:         Error Char
1318  *  wIndex:         Port
1319  *  wLength:        0
1320  *  Data:           None
1321  *
1322  *Error Char
1323  *  B0..7  Error Character
1324  *  B8     Error Character Processing
1325  *           0 = disabled
1326  *           1 = enabled
1327  *  B9..15 Reserved
1328  *
1329  */
1330
1331 /* FTDI_SIO_GET_MODEM_STATUS */
1332 /* Retrieve the current value of the modem status register */
1333
1334 #define FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE 0xc0
1335 #define FTDI_SIO_GET_MODEM_STATUS_REQUEST FTDI_SIO_GET_MODEM_STATUS
1336 #define FTDI_SIO_CTS_MASK 0x10
1337 #define FTDI_SIO_DSR_MASK 0x20
1338 #define FTDI_SIO_RI_MASK  0x40
1339 #define FTDI_SIO_RLSD_MASK 0x80
1340 /*
1341  *   BmRequestType:   1100 0000b
1342  *   bRequest:        FTDI_SIO_GET_MODEM_STATUS
1343  *   wValue:          zero
1344  *   wIndex:          Port
1345  *   wLength:         1
1346  *   Data:            Status
1347  *
1348  * One byte of data is returned
1349  * B0..3 0
1350  * B4    CTS
1351  *         0 = inactive
1352  *         1 = active
1353  * B5    DSR
1354  *         0 = inactive
1355  *         1 = active
1356  * B6    Ring Indicator (RI)
1357  *         0 = inactive
1358  *         1 = active
1359  * B7    Receive Line Signal Detect (RLSD)
1360  *         0 = inactive
1361  *         1 = active
1362  */
1363
1364
1365
1366 /* Descriptors returned by the device
1367  *
1368  *  Device Descriptor
1369  *
1370  * Offset       Field           Size    Value   Description
1371  * 0    bLength         1       0x12    Size of descriptor in bytes
1372  * 1    bDescriptorType 1       0x01    DEVICE Descriptor Type
1373  * 2    bcdUSB          2       0x0110  USB Spec Release Number
1374  * 4    bDeviceClass    1       0x00    Class Code
1375  * 5    bDeviceSubClass 1       0x00    SubClass Code
1376  * 6    bDeviceProtocol 1       0x00    Protocol Code
1377  * 7    bMaxPacketSize0 1       0x08    Maximum packet size for endpoint 0
1378  * 8    idVendor        2       0x0403  Vendor ID
1379  * 10   idProduct       2       0x8372  Product ID (FTDI_SIO_PID)
1380  * 12   bcdDevice       2       0x0001  Device release number
1381  * 14   iManufacturer   1       0x01    Index of man. string desc
1382  * 15   iProduct        1       0x02    Index of prod string desc
1383  * 16   iSerialNumber   1       0x02    Index of serial nmr string desc
1384  * 17   bNumConfigurations 1    0x01    Number of possible configurations
1385  *
1386  * Configuration Descriptor
1387  *
1388  * Offset       Field                   Size    Value
1389  * 0    bLength                 1       0x09    Size of descriptor in bytes
1390  * 1    bDescriptorType         1       0x02    CONFIGURATION Descriptor Type
1391  * 2    wTotalLength            2       0x0020  Total length of data
1392  * 4    bNumInterfaces          1       0x01    Number of interfaces supported
1393  * 5    bConfigurationValue     1       0x01    Argument for SetCOnfiguration() req
1394  * 6    iConfiguration          1       0x02    Index of config string descriptor
1395  * 7    bmAttributes            1       0x20    Config characteristics Remote Wakeup
1396  * 8    MaxPower                1       0x1E    Max power consumption
1397  *
1398  * Interface Descriptor
1399  *
1400  * Offset       Field                   Size    Value
1401  * 0    bLength                 1       0x09    Size of descriptor in bytes
1402  * 1    bDescriptorType         1       0x04    INTERFACE Descriptor Type
1403  * 2    bInterfaceNumber        1       0x00    Number of interface
1404  * 3    bAlternateSetting       1       0x00    Value used to select alternate
1405  * 4    bNumEndpoints           1       0x02    Number of endpoints
1406  * 5    bInterfaceClass         1       0xFF    Class Code
1407  * 6    bInterfaceSubClass      1       0xFF    Subclass Code
1408  * 7    bInterfaceProtocol      1       0xFF    Protocol Code
1409  * 8    iInterface              1       0x02    Index of interface string description
1410  *
1411  * IN Endpoint Descriptor
1412  *
1413  * Offset       Field                   Size    Value
1414  * 0    bLength                 1       0x07    Size of descriptor in bytes
1415  * 1    bDescriptorType         1       0x05    ENDPOINT descriptor type
1416  * 2    bEndpointAddress        1       0x82    Address of endpoint
1417  * 3    bmAttributes            1       0x02    Endpoint attributes - Bulk
1418  * 4    bNumEndpoints           2       0x0040  maximum packet size
1419  * 5    bInterval               1       0x00    Interval for polling endpoint
1420  *
1421  * OUT Endpoint Descriptor
1422  *
1423  * Offset       Field                   Size    Value
1424  * 0    bLength                 1       0x07    Size of descriptor in bytes
1425  * 1    bDescriptorType         1       0x05    ENDPOINT descriptor type
1426  * 2    bEndpointAddress        1       0x02    Address of endpoint
1427  * 3    bmAttributes            1       0x02    Endpoint attributes - Bulk
1428  * 4    bNumEndpoints           2       0x0040  maximum packet size
1429  * 5    bInterval               1       0x00    Interval for polling endpoint
1430  *
1431  * DATA FORMAT
1432  *
1433  * IN Endpoint
1434  *
1435  * The device reserves the first two bytes of data on this endpoint to contain the current
1436  * values of the modem and line status registers. In the absence of data, the device
1437  * generates a message consisting of these two status bytes every 40 ms
1438  *
1439  * Byte 0: Modem Status
1440  *
1441  * Offset       Description
1442  * B0   Reserved - must be 1
1443  * B1   Reserved - must be 0
1444  * B2   Reserved - must be 0
1445  * B3   Reserved - must be 0
1446  * B4   Clear to Send (CTS)
1447  * B5   Data Set Ready (DSR)
1448  * B6   Ring Indicator (RI)
1449  * B7   Receive Line Signal Detect (RLSD)
1450  *
1451  * Byte 1: Line Status
1452  *
1453  * Offset       Description
1454  * B0   Data Ready (DR)
1455  * B1   Overrun Error (OE)
1456  * B2   Parity Error (PE)
1457  * B3   Framing Error (FE)
1458  * B4   Break Interrupt (BI)
1459  * B5   Transmitter Holding Register (THRE)
1460  * B6   Transmitter Empty (TEMT)
1461  * B7   Error in RCVR FIFO
1462  *
1463  */
1464 #define FTDI_RS0_CTS    (1 << 4)
1465 #define FTDI_RS0_DSR    (1 << 5)
1466 #define FTDI_RS0_RI     (1 << 6)
1467 #define FTDI_RS0_RLSD   (1 << 7)
1468
1469 #define FTDI_RS_DR  1
1470 #define FTDI_RS_OE (1<<1)
1471 #define FTDI_RS_PE (1<<2)
1472 #define FTDI_RS_FE (1<<3)
1473 #define FTDI_RS_BI (1<<4)
1474 #define FTDI_RS_THRE (1<<5)
1475 #define FTDI_RS_TEMT (1<<6)
1476 #define FTDI_RS_FIFO  (1<<7)
1477
1478 /*
1479  * OUT Endpoint
1480  *
1481  * This device reserves the first bytes of data on this endpoint contain the length
1482  * and port identifier of the message. For the FTDI USB Serial converter the port
1483  * identifier is always 1.
1484  *
1485  * Byte 0: Line Status
1486  *
1487  * Offset       Description
1488  * B0   Reserved - must be 1
1489  * B1   Reserved - must be 0
1490  * B2..7        Length of message - (not including Byte 0)
1491  *
1492  */
1493