?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
OMAP3 SRF: Generic shared resource f/w
[linux-ginger.git] / drivers / usb / serial / io_edgeport.c
blobb97960ac92f2762bbe4938ddc1d76812fd726864
1 /*
2 * Edgeport USB Serial Converter driver
3 *
4 * Copyright (C) 2000 Inside Out Networks, All rights reserved.
5 * Copyright (C) 2001-2002 Greg Kroah-Hartman <greg@kroah.com>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * Supports the following devices:
13 * Edgeport/4
14 * Edgeport/4t
15 * Edgeport/2
16 * Edgeport/4i
17 * Edgeport/2i
18 * Edgeport/421
19 * Edgeport/21
20 * Rapidport/4
21 * Edgeport/8
22 * Edgeport/2D8
23 * Edgeport/4D8
24 * Edgeport/8i
25 *
26 * For questions or problems with this driver, contact Inside Out
27 * Networks technical support, or Peter Berger <pberger@brimson.com>,
28 * or Al Borchers <alborchers@steinerpoint.com>.
29 *
30 */
31
32 #include <linux/kernel.h>
33 #include <linux/jiffies.h>
34 #include <linux/errno.h>
35 #include <linux/init.h>
36 #include <linux/slab.h>
37 #include <linux/tty.h>
38 #include <linux/tty_driver.h>
39 #include <linux/tty_flip.h>
40 #include <linux/module.h>
41 #include <linux/spinlock.h>
42 #include <linux/serial.h>
43 #include <linux/ioctl.h>
44 #include <linux/wait.h>
45 #include <linux/firmware.h>
46 #include <linux/ihex.h>
47 #include <linux/uaccess.h>
48 #include <linux/usb.h>
49 #include <linux/usb/serial.h>
50 #include "io_edgeport.h"
51 #include "io_ionsp.h" /* info for the iosp messages */
52 #include "io_16654.h" /* 16654 UART defines */
53
54 /*
55 * Version Information
56 */
57 #define DRIVER_VERSION "v2.7"
58 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com> and David Iacovelli"
59 #define DRIVER_DESC "Edgeport USB Serial Driver"
60
61 #define MAX_NAME_LEN 64
62
63 #define CHASE_TIMEOUT (5*HZ) /* 5 seconds */
64 #define OPEN_TIMEOUT (5*HZ) /* 5 seconds */
65 #define COMMAND_TIMEOUT (5*HZ) /* 5 seconds */
66
67 /* receive port state */
68 enum RXSTATE {
69 EXPECT_HDR1 = 0, /* Expect header byte 1 */
70 EXPECT_HDR2 = 1, /* Expect header byte 2 */
71 EXPECT_DATA = 2, /* Expect 'RxBytesRemaining' data */
72 EXPECT_HDR3 = 3, /* Expect header byte 3 (for status hdrs only) */
73 };
74
75
76 /* Transmit Fifo
77 * This Transmit queue is an extension of the edgeport Rx buffer.
78 * The maximum amount of data buffered in both the edgeport
79 * Rx buffer (maxTxCredits) and this buffer will never exceed maxTxCredits.
80 */
81 struct TxFifo {
82 unsigned int head; /* index to head pointer (write) */
83 unsigned int tail; /* index to tail pointer (read) */
84 unsigned int count; /* Bytes in queue */
85 unsigned int size; /* Max size of queue (equal to Max number of TxCredits) */
86 unsigned char *fifo; /* allocated Buffer */
87 };
88
89 /* This structure holds all of the local port information */
90 struct edgeport_port {
91 __u16 txCredits; /* our current credits for this port */
92 __u16 maxTxCredits; /* the max size of the port */
93
94 struct TxFifo txfifo; /* transmit fifo -- size will be maxTxCredits */
95 struct urb *write_urb; /* write URB for this port */
96 bool write_in_progress; /* 'true' while a write URB is outstanding */
97 spinlock_t ep_lock;
98
99 __u8 shadowLCR; /* last LCR value received */
100 __u8 shadowMCR; /* last MCR value received */
101 __u8 shadowMSR; /* last MSR value received */
102 __u8 shadowLSR; /* last LSR value received */
103 __u8 shadowXonChar; /* last value set as XON char in Edgeport */
104 __u8 shadowXoffChar; /* last value set as XOFF char in Edgeport */
105 __u8 validDataMask;
106 __u32 baudRate;
107
108 bool open;
109 bool openPending;
110 bool commandPending;
111 bool closePending;
112 bool chaseResponsePending;
113
114 wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */
115 wait_queue_head_t wait_open; /* for handling sleeping while waiting for open to finish */
116 wait_queue_head_t wait_command; /* for handling sleeping while waiting for command to finish */
117 wait_queue_head_t delta_msr_wait; /* for handling sleeping while waiting for msr change to happen */
118
119 struct async_icount icount;
120 struct usb_serial_port *port; /* loop back to the owner of this object */
121 };
122
123
124 /* This structure holds all of the individual device information */
125 struct edgeport_serial {
126 char name[MAX_NAME_LEN+2]; /* string name of this device */
127
128 struct edge_manuf_descriptor manuf_descriptor; /* the manufacturer descriptor */
129 struct edge_boot_descriptor boot_descriptor; /* the boot firmware descriptor */
130 struct edgeport_product_info product_info; /* Product Info */
131 struct edge_compatibility_descriptor epic_descriptor; /* Edgeport compatible descriptor */
132 int is_epic; /* flag if EPiC device or not */
133
134 __u8 interrupt_in_endpoint; /* the interrupt endpoint handle */
135 unsigned char *interrupt_in_buffer; /* the buffer we use for the interrupt endpoint */
136 struct urb *interrupt_read_urb; /* our interrupt urb */
137
138 __u8 bulk_in_endpoint; /* the bulk in endpoint handle */
139 unsigned char *bulk_in_buffer; /* the buffer we use for the bulk in endpoint */
140 struct urb *read_urb; /* our bulk read urb */
141 bool read_in_progress;
142 spinlock_t es_lock;
143
144 __u8 bulk_out_endpoint; /* the bulk out endpoint handle */
145
146 __s16 rxBytesAvail; /* the number of bytes that we need to read from this device */
147
148 enum RXSTATE rxState; /* the current state of the bulk receive processor */
149 __u8 rxHeader1; /* receive header byte 1 */
150 __u8 rxHeader2; /* receive header byte 2 */
151 __u8 rxHeader3; /* receive header byte 3 */
152 __u8 rxPort; /* the port that we are currently receiving data for */
153 __u8 rxStatusCode; /* the receive status code */
154 __u8 rxStatusParam; /* the receive status paramater */
155 __s16 rxBytesRemaining; /* the number of port bytes left to read */
156 struct usb_serial *serial; /* loop back to the owner of this object */
157 };
158
159 /* baud rate information */
160 struct divisor_table_entry {
161 __u32 BaudRate;
162 __u16 Divisor;
163 };
164
165 /*
166 * Define table of divisors for Rev A EdgePort/4 hardware
167 * These assume a 3.6864MHz crystal, the standard /16, and
168 * MCR.7 = 0.
169 */
170
171 static const struct divisor_table_entry divisor_table[] = {
172 { 50, 4608},
173 { 75, 3072},
174 { 110, 2095}, /* 2094.545455 => 230450 => .0217 % over */
175 { 134, 1713}, /* 1713.011152 => 230398.5 => .00065% under */
176 { 150, 1536},
177 { 300, 768},
178 { 600, 384},
179 { 1200, 192},
180 { 1800, 128},
181 { 2400, 96},
182 { 4800, 48},
183 { 7200, 32},
184 { 9600, 24},
185 { 14400, 16},
186 { 19200, 12},
187 { 38400, 6},
188 { 57600, 4},
189 { 115200, 2},
190 { 230400, 1},
191 };
192
193 /* local variables */
194 static int debug;
195
196 static atomic_t CmdUrbs; /* Number of outstanding Command Write Urbs */
197
198
199 /* local function prototypes */
200
201 /* function prototypes for all URB callbacks */
202 static void edge_interrupt_callback(struct urb *urb);
203 static void edge_bulk_in_callback(struct urb *urb);
204 static void edge_bulk_out_data_callback(struct urb *urb);
205 static void edge_bulk_out_cmd_callback(struct urb *urb);
206
207 /* function prototypes for the usbserial callbacks */
208 static int edge_open(struct tty_struct *tty, struct usb_serial_port *port);
209 static void edge_close(struct usb_serial_port *port);
210 static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
211 const unsigned char *buf, int count);
212 static int edge_write_room(struct tty_struct *tty);
213 static int edge_chars_in_buffer(struct tty_struct *tty);
214 static void edge_throttle(struct tty_struct *tty);
215 static void edge_unthrottle(struct tty_struct *tty);
216 static void edge_set_termios(struct tty_struct *tty,
217 struct usb_serial_port *port,
218 struct ktermios *old_termios);
219 static int edge_ioctl(struct tty_struct *tty, struct file *file,
220 unsigned int cmd, unsigned long arg);
221 static void edge_break(struct tty_struct *tty, int break_state);
222 static int edge_tiocmget(struct tty_struct *tty, struct file *file);
223 static int edge_tiocmset(struct tty_struct *tty, struct file *file,
224 unsigned int set, unsigned int clear);
225 static int edge_startup(struct usb_serial *serial);
226 static void edge_disconnect(struct usb_serial *serial);
227 static void edge_release(struct usb_serial *serial);
228
229 #include "io_tables.h" /* all of the devices that this driver supports */
230
231 /* function prototypes for all of our local functions */
232
233 static void process_rcvd_data(struct edgeport_serial *edge_serial,
234 unsigned char *buffer, __u16 bufferLength);
235 static void process_rcvd_status(struct edgeport_serial *edge_serial,
236 __u8 byte2, __u8 byte3);
237 static void edge_tty_recv(struct device *dev, struct tty_struct *tty,
238 unsigned char *data, int length);
239 static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr);
240 static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData,
241 __u8 lsr, __u8 data);
242 static int send_iosp_ext_cmd(struct edgeport_port *edge_port, __u8 command,
243 __u8 param);
244 static int calc_baud_rate_divisor(int baud_rate, int *divisor);
245 static int send_cmd_write_baud_rate(struct edgeport_port *edge_port,
246 int baudRate);
247 static void change_port_settings(struct tty_struct *tty,
248 struct edgeport_port *edge_port,
249 struct ktermios *old_termios);
250 static int send_cmd_write_uart_register(struct edgeport_port *edge_port,
251 __u8 regNum, __u8 regValue);
252 static int write_cmd_usb(struct edgeport_port *edge_port,
253 unsigned char *buffer, int writeLength);
254 static void send_more_port_data(struct edgeport_serial *edge_serial,
255 struct edgeport_port *edge_port);
256
257 static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
258 __u16 length, const __u8 *data);
259 static int rom_read(struct usb_serial *serial, __u16 extAddr, __u16 addr,
260 __u16 length, __u8 *data);
261 static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
262 __u16 length, const __u8 *data);
263 static void get_manufacturing_desc(struct edgeport_serial *edge_serial);
264 static void get_boot_desc(struct edgeport_serial *edge_serial);
265 static void load_application_firmware(struct edgeport_serial *edge_serial);
266
267 static void unicode_to_ascii(char *string, int buflen,
268 __le16 *unicode, int unicode_size);
269
270
271 /* ************************************************************************ */
272 /* ************************************************************************ */
273 /* ************************************************************************ */
274 /* ************************************************************************ */
275
276 /************************************************************************
277 * *
278 * update_edgeport_E2PROM() Compare current versions of *
279 * Boot ROM and Manufacture *
280 * Descriptors with versions *
281 * embedded in this driver *
282 * *
283 ************************************************************************/
284 static void update_edgeport_E2PROM(struct edgeport_serial *edge_serial)
285 {
286 __u32 BootCurVer;
287 __u32 BootNewVer;
288 __u8 BootMajorVersion;
289 __u8 BootMinorVersion;
290 __u16 BootBuildNumber;
291 __u32 Bootaddr;
292 const struct ihex_binrec *rec;
293 const struct firmware *fw;
294 const char *fw_name;
295 int response;
296
297 switch (edge_serial->product_info.iDownloadFile) {
298 case EDGE_DOWNLOAD_FILE_I930:
299 fw_name = "edgeport/boot.fw";
300 break;
301 case EDGE_DOWNLOAD_FILE_80251:
302 fw_name = "edgeport/boot2.fw";
303 break;
304 default:
305 return;
306 }
307
308 response = request_ihex_firmware(&fw, fw_name,
309 &edge_serial->serial->dev->dev);
310 if (response) {
311 printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
312 fw_name, response);
313 return;
314 }
315
316 rec = (const struct ihex_binrec *)fw->data;
317 BootMajorVersion = rec->data[0];
318 BootMinorVersion = rec->data[1];
319 BootBuildNumber = (rec->data[2] << 8) | rec->data[3];
320
321 /* Check Boot Image Version */
322 BootCurVer = (edge_serial->boot_descriptor.MajorVersion << 24) +
323 (edge_serial->boot_descriptor.MinorVersion << 16) +
324 le16_to_cpu(edge_serial->boot_descriptor.BuildNumber);
325
326 BootNewVer = (BootMajorVersion << 24) +
327 (BootMinorVersion << 16) +
328 BootBuildNumber;
329
330 dbg("Current Boot Image version %d.%d.%d",
331 edge_serial->boot_descriptor.MajorVersion,
332 edge_serial->boot_descriptor.MinorVersion,
333 le16_to_cpu(edge_serial->boot_descriptor.BuildNumber));
334
335
336 if (BootNewVer > BootCurVer) {
337 dbg("**Update Boot Image from %d.%d.%d to %d.%d.%d",
338 edge_serial->boot_descriptor.MajorVersion,
339 edge_serial->boot_descriptor.MinorVersion,
340 le16_to_cpu(edge_serial->boot_descriptor.BuildNumber),
341 BootMajorVersion, BootMinorVersion, BootBuildNumber);
342
343 dbg("Downloading new Boot Image");
344
345 for (rec = ihex_next_binrec(rec); rec;
346 rec = ihex_next_binrec(rec)) {
347 Bootaddr = be32_to_cpu(rec->addr);
348 response = rom_write(edge_serial->serial,
349 Bootaddr >> 16,
350 Bootaddr & 0xFFFF,
351 be16_to_cpu(rec->len),
352 &rec->data[0]);
353 if (response < 0) {
354 dev_err(&edge_serial->serial->dev->dev,
355 "rom_write failed (%x, %x, %d)\n",
356 Bootaddr >> 16, Bootaddr & 0xFFFF,
357 be16_to_cpu(rec->len));
358 break;
359 }
360 }
361 } else {
362 dbg("Boot Image -- already up to date");
363 }
364 release_firmware(fw);
365 }
366
367
368 /************************************************************************
369 * *
370 * Get string descriptor from device *
371 * *
372 ************************************************************************/
373 static int get_string(struct usb_device *dev, int Id, char *string, int buflen)
374 {
375 struct usb_string_descriptor StringDesc;
376 struct usb_string_descriptor *pStringDesc;
377
378 dbg("%s - USB String ID = %d", __func__, Id);
379
380 if (!usb_get_descriptor(dev, USB_DT_STRING, Id,
381 &StringDesc, sizeof(StringDesc)))
382 return 0;
383
384 pStringDesc = kmalloc(StringDesc.bLength, GFP_KERNEL);
385 if (!pStringDesc)
386 return 0;
387
388 if (!usb_get_descriptor(dev, USB_DT_STRING, Id,
389 pStringDesc, StringDesc.bLength)) {
390 kfree(pStringDesc);
391 return 0;
392 }
393
394 unicode_to_ascii(string, buflen,
395 pStringDesc->wData, pStringDesc->bLength/2);
396
397 kfree(pStringDesc);
398 dbg("%s - USB String %s", __func__, string);
399 return strlen(string);
400 }
401
402
403 #if 0
404 /************************************************************************
405 *
406 * Get string descriptor from device
407 *
408 ************************************************************************/
409 static int get_string_desc(struct usb_device *dev, int Id,
410 struct usb_string_descriptor **pRetDesc)
411 {
412 struct usb_string_descriptor StringDesc;
413 struct usb_string_descriptor *pStringDesc;
414
415 dbg("%s - USB String ID = %d", __func__, Id);
416
417 if (!usb_get_descriptor(dev, USB_DT_STRING, Id, &StringDesc,
418 sizeof(StringDesc)))
419 return 0;
420
421 pStringDesc = kmalloc(StringDesc.bLength, GFP_KERNEL);
422 if (!pStringDesc)
423 return -1;
424
425 if (!usb_get_descriptor(dev, USB_DT_STRING, Id, pStringDesc,
426 StringDesc.bLength)) {
427 kfree(pStringDesc);
428 return -1;
429 }
430
431 *pRetDesc = pStringDesc;
432 return 0;
433 }
434 #endif
435
436 static void dump_product_info(struct edgeport_product_info *product_info)
437 {
438 /* Dump Product Info structure */
439 dbg("**Product Information:");
440 dbg(" ProductId %x", product_info->ProductId);
441 dbg(" NumPorts %d", product_info->NumPorts);
442 dbg(" ProdInfoVer %d", product_info->ProdInfoVer);
443 dbg(" IsServer %d", product_info->IsServer);
444 dbg(" IsRS232 %d", product_info->IsRS232);
445 dbg(" IsRS422 %d", product_info->IsRS422);
446 dbg(" IsRS485 %d", product_info->IsRS485);
447 dbg(" RomSize %d", product_info->RomSize);
448 dbg(" RamSize %d", product_info->RamSize);
449 dbg(" CpuRev %x", product_info->CpuRev);
450 dbg(" BoardRev %x", product_info->BoardRev);
451 dbg(" BootMajorVersion %d.%d.%d", product_info->BootMajorVersion,
452 product_info->BootMinorVersion,
453 le16_to_cpu(product_info->BootBuildNumber));
454 dbg(" FirmwareMajorVersion %d.%d.%d",
455 product_info->FirmwareMajorVersion,
456 product_info->FirmwareMinorVersion,
457 le16_to_cpu(product_info->FirmwareBuildNumber));
458 dbg(" ManufactureDescDate %d/%d/%d",
459 product_info->ManufactureDescDate[0],
460 product_info->ManufactureDescDate[1],
461 product_info->ManufactureDescDate[2]+1900);
462 dbg(" iDownloadFile 0x%x", product_info->iDownloadFile);
463 dbg(" EpicVer %d", product_info->EpicVer);
464 }
465
466 static void get_product_info(struct edgeport_serial *edge_serial)
467 {
468 struct edgeport_product_info *product_info = &edge_serial->product_info;
469
470 memset(product_info, 0, sizeof(struct edgeport_product_info));
471
472 product_info->ProductId = (__u16)(le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct) & ~ION_DEVICE_ID_80251_NETCHIP);
473 product_info->NumPorts = edge_serial->manuf_descriptor.NumPorts;
474 product_info->ProdInfoVer = 0;
475
476 product_info->RomSize = edge_serial->manuf_descriptor.RomSize;
477 product_info->RamSize = edge_serial->manuf_descriptor.RamSize;
478 product_info->CpuRev = edge_serial->manuf_descriptor.CpuRev;
479 product_info->BoardRev = edge_serial->manuf_descriptor.BoardRev;
480
481 product_info->BootMajorVersion =
482 edge_serial->boot_descriptor.MajorVersion;
483 product_info->BootMinorVersion =
484 edge_serial->boot_descriptor.MinorVersion;
485 product_info->BootBuildNumber =
486 edge_serial->boot_descriptor.BuildNumber;
487
488 memcpy(product_info->ManufactureDescDate,
489 edge_serial->manuf_descriptor.DescDate,
490 sizeof(edge_serial->manuf_descriptor.DescDate));
491
492 /* check if this is 2nd generation hardware */
493 if (le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct)
494 & ION_DEVICE_ID_80251_NETCHIP)
495 product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_80251;
496 else
497 product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_I930;
498
499 /* Determine Product type and set appropriate flags */
500 switch (DEVICE_ID_FROM_USB_PRODUCT_ID(product_info->ProductId)) {
501 case ION_DEVICE_ID_EDGEPORT_COMPATIBLE:
502 case ION_DEVICE_ID_EDGEPORT_4T:
503 case ION_DEVICE_ID_EDGEPORT_4:
504 case ION_DEVICE_ID_EDGEPORT_2:
505 case ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU:
506 case ION_DEVICE_ID_EDGEPORT_8:
507 case ION_DEVICE_ID_EDGEPORT_421:
508 case ION_DEVICE_ID_EDGEPORT_21:
509 case ION_DEVICE_ID_EDGEPORT_2_DIN:
510 case ION_DEVICE_ID_EDGEPORT_4_DIN:
511 case ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU:
512 product_info->IsRS232 = 1;
513 break;
514
515 case ION_DEVICE_ID_EDGEPORT_2I: /* Edgeport/2 RS422/RS485 */
516 product_info->IsRS422 = 1;
517 product_info->IsRS485 = 1;
518 break;
519
520 case ION_DEVICE_ID_EDGEPORT_8I: /* Edgeport/4 RS422 */
521 case ION_DEVICE_ID_EDGEPORT_4I: /* Edgeport/4 RS422 */
522 product_info->IsRS422 = 1;
523 break;
524 }
525
526 dump_product_info(product_info);
527 }
528
529 static int get_epic_descriptor(struct edgeport_serial *ep)
530 {
531 int result;
532 struct usb_serial *serial = ep->serial;
533 struct edgeport_product_info *product_info = &ep->product_info;
534 struct edge_compatibility_descriptor *epic = &ep->epic_descriptor;
535 struct edge_compatibility_bits *bits;
536
537 ep->is_epic = 0;
538 result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
539 USB_REQUEST_ION_GET_EPIC_DESC,
540 0xC0, 0x00, 0x00,
541 &ep->epic_descriptor,
542 sizeof(struct edge_compatibility_descriptor),
543 300);
544
545 dbg("%s result = %d", __func__, result);
546
547 if (result > 0) {
548 ep->is_epic = 1;
549 memset(product_info, 0, sizeof(struct edgeport_product_info));
550
551 product_info->NumPorts = epic->NumPorts;
552 product_info->ProdInfoVer = 0;
553 product_info->FirmwareMajorVersion = epic->MajorVersion;
554 product_info->FirmwareMinorVersion = epic->MinorVersion;
555 product_info->FirmwareBuildNumber = epic->BuildNumber;
556 product_info->iDownloadFile = epic->iDownloadFile;
557 product_info->EpicVer = epic->EpicVer;
558 product_info->Epic = epic->Supports;
559 product_info->ProductId = ION_DEVICE_ID_EDGEPORT_COMPATIBLE;
560 dump_product_info(product_info);
561
562 bits = &ep->epic_descriptor.Supports;
563 dbg("**EPIC descriptor:");
564 dbg(" VendEnableSuspend: %s", bits->VendEnableSuspend ? "TRUE": "FALSE");
565 dbg(" IOSPOpen : %s", bits->IOSPOpen ? "TRUE": "FALSE");
566 dbg(" IOSPClose : %s", bits->IOSPClose ? "TRUE": "FALSE");
567 dbg(" IOSPChase : %s", bits->IOSPChase ? "TRUE": "FALSE");
568 dbg(" IOSPSetRxFlow : %s", bits->IOSPSetRxFlow ? "TRUE": "FALSE");
569 dbg(" IOSPSetTxFlow : %s", bits->IOSPSetTxFlow ? "TRUE": "FALSE");
570 dbg(" IOSPSetXChar : %s", bits->IOSPSetXChar ? "TRUE": "FALSE");
571 dbg(" IOSPRxCheck : %s", bits->IOSPRxCheck ? "TRUE": "FALSE");
572 dbg(" IOSPSetClrBreak : %s", bits->IOSPSetClrBreak ? "TRUE": "FALSE");
573 dbg(" IOSPWriteMCR : %s", bits->IOSPWriteMCR ? "TRUE": "FALSE");
574 dbg(" IOSPWriteLCR : %s", bits->IOSPWriteLCR ? "TRUE": "FALSE");
575 dbg(" IOSPSetBaudRate : %s", bits->IOSPSetBaudRate ? "TRUE": "FALSE");
576 dbg(" TrueEdgeport : %s", bits->TrueEdgeport ? "TRUE": "FALSE");
577 }
578
579 return result;
580 }
581
582
583 /************************************************************************/
584 /************************************************************************/
585 /* U S B C A L L B A C K F U N C T I O N S */
586 /* U S B C A L L B A C K F U N C T I O N S */
587 /************************************************************************/
588 /************************************************************************/
589
590 /*****************************************************************************
591 * edge_interrupt_callback
592 * this is the callback function for when we have received data on the
593 * interrupt endpoint.
594 *****************************************************************************/
595 static void edge_interrupt_callback(struct urb *urb)
596 {
597 struct edgeport_serial *edge_serial = urb->context;
598 struct edgeport_port *edge_port;
599 struct usb_serial_port *port;
600 struct tty_struct *tty;
601 unsigned char *data = urb->transfer_buffer;
602 int length = urb->actual_length;
603 int bytes_avail;
604 int position;
605 int txCredits;
606 int portNumber;
607 int result;
608 int status = urb->status;
609
610 dbg("%s", __func__);
611
612 switch (status) {
613 case 0:
614 /* success */
615 break;
616 case -ECONNRESET:
617 case -ENOENT:
618 case -ESHUTDOWN:
619 /* this urb is terminated, clean up */
620 dbg("%s - urb shutting down with status: %d",
621 __func__, status);
622 return;
623 default:
624 dbg("%s - nonzero urb status received: %d", __func__, status);
625 goto exit;
626 }
627
628 /* process this interrupt-read even if there are no ports open */
629 if (length) {
630 usb_serial_debug_data(debug, &edge_serial->serial->dev->dev,
631 __func__, length, data);
632
633 if (length > 1) {
634 bytes_avail = data[0] | (data[1] << 8);
635 if (bytes_avail) {
636 spin_lock(&edge_serial->es_lock);
637 edge_serial->rxBytesAvail += bytes_avail;
638 dbg("%s - bytes_avail=%d, rxBytesAvail=%d, read_in_progress=%d", __func__, bytes_avail, edge_serial->rxBytesAvail, edge_serial->read_in_progress);
639
640 if (edge_serial->rxBytesAvail > 0 &&
641 !edge_serial->read_in_progress) {
642 dbg("%s - posting a read", __func__);
643 edge_serial->read_in_progress = true;
644
645 /* we have pending bytes on the
646 bulk in pipe, send a request */
647 edge_serial->read_urb->dev = edge_serial->serial->dev;
648 result = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC);
649 if (result) {
650 dev_err(&edge_serial->serial->dev->dev, "%s - usb_submit_urb(read bulk) failed with result = %d\n", __func__, result);
651 edge_serial->read_in_progress = false;
652 }
653 }
654 spin_unlock(&edge_serial->es_lock);
655 }
656 }
657 /* grab the txcredits for the ports if available */
658 position = 2;
659 portNumber = 0;
660 while ((position < length) &&
661 (portNumber < edge_serial->serial->num_ports)) {
662 txCredits = data[position] | (data[position+1] << 8);
663 if (txCredits) {
664 port = edge_serial->serial->port[portNumber];
665 edge_port = usb_get_serial_port_data(port);
666 if (edge_port->open) {
667 spin_lock(&edge_port->ep_lock);
668 edge_port->txCredits += txCredits;
669 spin_unlock(&edge_port->ep_lock);
670 dbg("%s - txcredits for port%d = %d",
671 __func__, portNumber,
672 edge_port->txCredits);
673
674 /* tell the tty driver that something
675 has changed */
676 tty = tty_port_tty_get(
677 &edge_port->port->port);
678 if (tty) {
679 tty_wakeup(tty);
680 tty_kref_put(tty);
681 }
682 /* Since we have more credit, check
683 if more data can be sent */
684 send_more_port_data(edge_serial,
685 edge_port);
686 }
687 }
688 position += 2;
689 ++portNumber;
690 }
691 }
692
693 exit:
694 result = usb_submit_urb(urb, GFP_ATOMIC);
695 if (result)
696 dev_err(&urb->dev->dev,
697 "%s - Error %d submitting control urb\n",
698 __func__, result);
699 }
700
701
702 /*****************************************************************************
703 * edge_bulk_in_callback
704 * this is the callback function for when we have received data on the
705 * bulk in endpoint.
706 *****************************************************************************/
707 static void edge_bulk_in_callback(struct urb *urb)
708 {
709 struct edgeport_serial *edge_serial = urb->context;
710 unsigned char *data = urb->transfer_buffer;
711 int retval;
712 __u16 raw_data_length;
713 int status = urb->status;
714
715 dbg("%s", __func__);
716
717 if (status) {
718 dbg("%s - nonzero read bulk status received: %d",
719 __func__, status);
720 edge_serial->read_in_progress = false;
721 return;
722 }
723
724 if (urb->actual_length == 0) {
725 dbg("%s - read bulk callback with no data", __func__);
726 edge_serial->read_in_progress = false;
727 return;
728 }
729
730 raw_data_length = urb->actual_length;
731
732 usb_serial_debug_data(debug, &edge_serial->serial->dev->dev,
733 __func__, raw_data_length, data);
734
735 spin_lock(&edge_serial->es_lock);
736
737 /* decrement our rxBytes available by the number that we just got */
738 edge_serial->rxBytesAvail -= raw_data_length;
739
740 dbg("%s - Received = %d, rxBytesAvail %d", __func__,
741 raw_data_length, edge_serial->rxBytesAvail);
742
743 process_rcvd_data(edge_serial, data, urb->actual_length);
744
745 /* check to see if there's any more data for us to read */
746 if (edge_serial->rxBytesAvail > 0) {
747 dbg("%s - posting a read", __func__);
748 edge_serial->read_urb->dev = edge_serial->serial->dev;
749 retval = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC);
750 if (retval) {
751 dev_err(&urb->dev->dev,
752 "%s - usb_submit_urb(read bulk) failed, "
753 "retval = %d\n", __func__, retval);
754 edge_serial->read_in_progress = false;
755 }
756 } else {
757 edge_serial->read_in_progress = false;
758 }
759
760 spin_unlock(&edge_serial->es_lock);
761 }
762
763
764 /*****************************************************************************
765 * edge_bulk_out_data_callback
766 * this is the callback function for when we have finished sending
767 * serial data on the bulk out endpoint.
768 *****************************************************************************/
769 static void edge_bulk_out_data_callback(struct urb *urb)
770 {
771 struct edgeport_port *edge_port = urb->context;
772 struct tty_struct *tty;
773 int status = urb->status;
774
775 dbg("%s", __func__);
776
777 if (status) {
778 dbg("%s - nonzero write bulk status received: %d",
779 __func__, status);
780 }
781
782 tty = tty_port_tty_get(&edge_port->port->port);
783
784 if (tty && edge_port->open) {
785 /* let the tty driver wakeup if it has a special
786 write_wakeup function */
787 tty_wakeup(tty);
788 }
789 tty_kref_put(tty);
790
791 /* Release the Write URB */
792 edge_port->write_in_progress = false;
793
794 /* Check if more data needs to be sent */
795 send_more_port_data((struct edgeport_serial *)
796 (usb_get_serial_data(edge_port->port->serial)), edge_port);
797 }
798
799
800 /*****************************************************************************
801 * BulkOutCmdCallback
802 * this is the callback function for when we have finished sending a
803 * command on the bulk out endpoint.
804 *****************************************************************************/
805 static void edge_bulk_out_cmd_callback(struct urb *urb)
806 {
807 struct edgeport_port *edge_port = urb->context;
808 struct tty_struct *tty;
809 int status = urb->status;
810
811 dbg("%s", __func__);
812
813 atomic_dec(&CmdUrbs);
814 dbg("%s - FREE URB %p (outstanding %d)", __func__,
815 urb, atomic_read(&CmdUrbs));
816
817
818 /* clean up the transfer buffer */
819 kfree(urb->transfer_buffer);
820
821 /* Free the command urb */
822 usb_free_urb(urb);
823
824 if (status) {
825 dbg("%s - nonzero write bulk status received: %d",
826 __func__, status);
827 return;
828 }
829
830 /* Get pointer to tty */
831 tty = tty_port_tty_get(&edge_port->port->port);
832
833 /* tell the tty driver that something has changed */
834 if (tty && edge_port->open)
835 tty_wakeup(tty);
836 tty_kref_put(tty);
837
838 /* we have completed the command */
839 edge_port->commandPending = false;
840 wake_up(&edge_port->wait_command);
841 }
842
843
844 /*****************************************************************************
845 * Driver tty interface functions
846 *****************************************************************************/
847
848 /*****************************************************************************
849 * SerialOpen
850 * this function is called by the tty driver when a port is opened
851 * If successful, we return 0
852 * Otherwise we return a negative error number.
853 *****************************************************************************/
854 static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
855 {
856 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
857 struct usb_serial *serial;
858 struct edgeport_serial *edge_serial;
859 int response;
860
861 dbg("%s - port %d", __func__, port->number);
862
863 if (edge_port == NULL)
864 return -ENODEV;
865
866 /* see if we've set up our endpoint info yet (can't set it up
867 in edge_startup as the structures were not set up at that time.) */
868 serial = port->serial;
869 edge_serial = usb_get_serial_data(serial);
870 if (edge_serial == NULL)
871 return -ENODEV;
872 if (edge_serial->interrupt_in_buffer == NULL) {
873 struct usb_serial_port *port0 = serial->port[0];
874
875 /* not set up yet, so do it now */
876 edge_serial->interrupt_in_buffer =
877 port0->interrupt_in_buffer;
878 edge_serial->interrupt_in_endpoint =
879 port0->interrupt_in_endpointAddress;
880 edge_serial->interrupt_read_urb = port0->interrupt_in_urb;
881 edge_serial->bulk_in_buffer = port0->bulk_in_buffer;
882 edge_serial->bulk_in_endpoint =
883 port0->bulk_in_endpointAddress;
884 edge_serial->read_urb = port0->read_urb;
885 edge_serial->bulk_out_endpoint =
886 port0->bulk_out_endpointAddress;
887
888 /* set up our interrupt urb */
889 usb_fill_int_urb(edge_serial->interrupt_read_urb,
890 serial->dev,
891 usb_rcvintpipe(serial->dev,
892 port0->interrupt_in_endpointAddress),
893 port0->interrupt_in_buffer,
894 edge_serial->interrupt_read_urb->transfer_buffer_length,
895 edge_interrupt_callback, edge_serial,
896 edge_serial->interrupt_read_urb->interval);
897
898 /* set up our bulk in urb */
899 usb_fill_bulk_urb(edge_serial->read_urb, serial->dev,
900 usb_rcvbulkpipe(serial->dev,
901 port0->bulk_in_endpointAddress),
902 port0->bulk_in_buffer,
903 edge_serial->read_urb->transfer_buffer_length,
904 edge_bulk_in_callback, edge_serial);
905 edge_serial->read_in_progress = false;
906
907 /* start interrupt read for this edgeport
908 * this interrupt will continue as long
909 * as the edgeport is connected */
910 response = usb_submit_urb(edge_serial->interrupt_read_urb,
911 GFP_KERNEL);
912 if (response) {
913 dev_err(&port->dev,
914 "%s - Error %d submitting control urb\n",
915 __func__, response);
916 }
917 }
918
919 /* initialize our wait queues */
920 init_waitqueue_head(&edge_port->wait_open);
921 init_waitqueue_head(&edge_port->wait_chase);
922 init_waitqueue_head(&edge_port->delta_msr_wait);
923 init_waitqueue_head(&edge_port->wait_command);
924
925 /* initialize our icount structure */
926 memset(&(edge_port->icount), 0x00, sizeof(edge_port->icount));
927
928 /* initialize our port settings */
929 edge_port->txCredits = 0; /* Can't send any data yet */
930 /* Must always set this bit to enable ints! */
931 edge_port->shadowMCR = MCR_MASTER_IE;
932 edge_port->chaseResponsePending = false;
933
934 /* send a open port command */
935 edge_port->openPending = true;
936 edge_port->open = false;
937 response = send_iosp_ext_cmd(edge_port, IOSP_CMD_OPEN_PORT, 0);
938
939 if (response < 0) {
940 dev_err(&port->dev, "%s - error sending open port command\n",
941 __func__);
942 edge_port->openPending = false;
943 return -ENODEV;
944 }
945
946 /* now wait for the port to be completely opened */
947 wait_event_timeout(edge_port->wait_open, !edge_port->openPending,
948 OPEN_TIMEOUT);
949
950 if (!edge_port->open) {
951 /* open timed out */
952 dbg("%s - open timedout", __func__);
953 edge_port->openPending = false;
954 return -ENODEV;
955 }
956
957 /* create the txfifo */
958 edge_port->txfifo.head = 0;
959 edge_port->txfifo.tail = 0;
960 edge_port->txfifo.count = 0;
961 edge_port->txfifo.size = edge_port->maxTxCredits;
962 edge_port->txfifo.fifo = kmalloc(edge_port->maxTxCredits, GFP_KERNEL);
963
964 if (!edge_port->txfifo.fifo) {
965 dbg("%s - no memory", __func__);
966 edge_close(port);
967 return -ENOMEM;
968 }
969
970 /* Allocate a URB for the write */
971 edge_port->write_urb = usb_alloc_urb(0, GFP_KERNEL);
972 edge_port->write_in_progress = false;
973
974 if (!edge_port->write_urb) {
975 dbg("%s - no memory", __func__);
976 edge_close(port);
977 return -ENOMEM;
978 }
979
980 dbg("%s(%d) - Initialize TX fifo to %d bytes",
981 __func__, port->number, edge_port->maxTxCredits);
982
983 dbg("%s exited", __func__);
984
985 return 0;
986 }
987
988
989 /************************************************************************
990 *
991 * block_until_chase_response
992 *
993 * This function will block the close until one of the following:
994 * 1. Response to our Chase comes from Edgeport
995 * 2. A timeout of 10 seconds without activity has expired
996 * (1K of Edgeport data @ 2400 baud ==> 4 sec to empty)
997 *
998 ************************************************************************/
999 static void block_until_chase_response(struct edgeport_port *edge_port)
1000 {
1001 DEFINE_WAIT(wait);
1002 __u16 lastCredits;
1003 int timeout = 1*HZ;
1004 int loop = 10;
1005
1006 while (1) {
1007 /* Save Last credits */
1008 lastCredits = edge_port->txCredits;
1009
1010 /* Did we get our Chase response */
1011 if (!edge_port->chaseResponsePending) {
1012 dbg("%s - Got Chase Response", __func__);
1013
1014 /* did we get all of our credit back? */
1015 if (edge_port->txCredits == edge_port->maxTxCredits) {
1016 dbg("%s - Got all credits", __func__);
1017 return;
1018 }
1019 }
1020
1021 /* Block the thread for a while */
1022 prepare_to_wait(&edge_port->wait_chase, &wait,
1023 TASK_UNINTERRUPTIBLE);
1024 schedule_timeout(timeout);
1025 finish_wait(&edge_port->wait_chase, &wait);
1026
1027 if (lastCredits == edge_port->txCredits) {
1028 /* No activity.. count down. */
1029 loop--;
1030 if (loop == 0) {
1031 edge_port->chaseResponsePending = false;
1032 dbg("%s - Chase TIMEOUT", __func__);
1033 return;
1034 }
1035 } else {
1036 /* Reset timeout value back to 10 seconds */
1037 dbg("%s - Last %d, Current %d", __func__,
1038 lastCredits, edge_port->txCredits);
1039 loop = 10;
1040 }
1041 }
1042 }
1043
1044
1045 /************************************************************************
1046 *
1047 * block_until_tx_empty
1048 *
1049 * This function will block the close until one of the following:
1050 * 1. TX count are 0
1051 * 2. The edgeport has stopped
1052 * 3. A timeout of 3 seconds without activity has expired
1053 *
1054 ************************************************************************/
1055 static void block_until_tx_empty(struct edgeport_port *edge_port)
1056 {
1057 DEFINE_WAIT(wait);
1058 struct TxFifo *fifo = &edge_port->txfifo;
1059 __u32 lastCount;
1060 int timeout = HZ/10;
1061 int loop = 30;
1062
1063 while (1) {
1064 /* Save Last count */
1065 lastCount = fifo->count;
1066
1067 /* Is the Edgeport Buffer empty? */
1068 if (lastCount == 0) {
1069 dbg("%s - TX Buffer Empty", __func__);
1070 return;
1071 }
1072
1073 /* Block the thread for a while */
1074 prepare_to_wait(&edge_port->wait_chase, &wait,
1075 TASK_UNINTERRUPTIBLE);
1076 schedule_timeout(timeout);
1077 finish_wait(&edge_port->wait_chase, &wait);
1078
1079 dbg("%s wait", __func__);
1080
1081 if (lastCount == fifo->count) {
1082 /* No activity.. count down. */
1083 loop--;
1084 if (loop == 0) {
1085 dbg("%s - TIMEOUT", __func__);
1086 return;
1087 }
1088 } else {
1089 /* Reset timeout value back to seconds */
1090 loop = 30;
1091 }
1092 }
1093 }
1094
1095
1096 /*****************************************************************************
1097 * edge_close
1098 * this function is called by the tty driver when a port is closed
1099 *****************************************************************************/
1100 static void edge_close(struct usb_serial_port *port)
1101 {
1102 struct edgeport_serial *edge_serial;
1103 struct edgeport_port *edge_port;
1104 int status;
1105
1106 dbg("%s - port %d", __func__, port->number);
1107
1108 edge_serial = usb_get_serial_data(port->serial);
1109 edge_port = usb_get_serial_port_data(port);
1110 if (edge_serial == NULL || edge_port == NULL)
1111 return;
1112
1113 /* block until tx is empty */
1114 block_until_tx_empty(edge_port);
1115
1116 edge_port->closePending = true;
1117
1118 if ((!edge_serial->is_epic) ||
1119 ((edge_serial->is_epic) &&
1120 (edge_serial->epic_descriptor.Supports.IOSPChase))) {
1121 /* flush and chase */
1122 edge_port->chaseResponsePending = true;
1123
1124 dbg("%s - Sending IOSP_CMD_CHASE_PORT", __func__);
1125 status = send_iosp_ext_cmd(edge_port, IOSP_CMD_CHASE_PORT, 0);
1126 if (status == 0)
1127 /* block until chase finished */
1128 block_until_chase_response(edge_port);
1129 else
1130 edge_port->chaseResponsePending = false;
1131 }
1132
1133 if ((!edge_serial->is_epic) ||
1134 ((edge_serial->is_epic) &&
1135 (edge_serial->epic_descriptor.Supports.IOSPClose))) {
1136 /* close the port */
1137 dbg("%s - Sending IOSP_CMD_CLOSE_PORT", __func__);
1138 send_iosp_ext_cmd(edge_port, IOSP_CMD_CLOSE_PORT, 0);
1139 }
1140
1141 /* port->close = true; */
1142 edge_port->closePending = false;
1143 edge_port->open = false;
1144 edge_port->openPending = false;
1145
1146 usb_kill_urb(edge_port->write_urb);
1147
1148 if (edge_port->write_urb) {
1149 /* if this urb had a transfer buffer already
1150 (old transfer) free it */
1151 kfree(edge_port->write_urb->transfer_buffer);
1152 usb_free_urb(edge_port->write_urb);
1153 edge_port->write_urb = NULL;
1154 }
1155 kfree(edge_port->txfifo.fifo);
1156 edge_port->txfifo.fifo = NULL;
1157
1158 dbg("%s exited", __func__);
1159 }
1160
1161 /*****************************************************************************
1162 * SerialWrite
1163 * this function is called by the tty driver when data should be written
1164 * to the port.
1165 * If successful, we return the number of bytes written, otherwise we
1166 * return a negative error number.
1167 *****************************************************************************/
1168 static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
1169 const unsigned char *data, int count)
1170 {
1171 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1172 struct TxFifo *fifo;
1173 int copySize;
1174 int bytesleft;
1175 int firsthalf;
1176 int secondhalf;
1177 unsigned long flags;
1178
1179 dbg("%s - port %d", __func__, port->number);
1180
1181 if (edge_port == NULL)
1182 return -ENODEV;
1183
1184 /* get a pointer to the Tx fifo */
1185 fifo = &edge_port->txfifo;
1186
1187 spin_lock_irqsave(&edge_port->ep_lock, flags);
1188
1189 /* calculate number of bytes to put in fifo */
1190 copySize = min((unsigned int)count,
1191 (edge_port->txCredits - fifo->count));
1192
1193 dbg("%s(%d) of %d byte(s) Fifo room %d -- will copy %d bytes",
1194 __func__, port->number, count,
1195 edge_port->txCredits - fifo->count, copySize);
1196
1197 /* catch writes of 0 bytes which the tty driver likes to give us,
1198 and when txCredits is empty */
1199 if (copySize == 0) {
1200 dbg("%s - copySize = Zero", __func__);
1201 goto finish_write;
1202 }
1203
1204 /* queue the data
1205 * since we can never overflow the buffer we do not have to check for a
1206 * full condition
1207 *
1208 * the copy is done is two parts -- first fill to the end of the buffer
1209 * then copy the reset from the start of the buffer
1210 */
1211 bytesleft = fifo->size - fifo->head;
1212 firsthalf = min(bytesleft, copySize);
1213 dbg("%s - copy %d bytes of %d into fifo ", __func__,
1214 firsthalf, bytesleft);
1215
1216 /* now copy our data */
1217 memcpy(&fifo->fifo[fifo->head], data, firsthalf);
1218 usb_serial_debug_data(debug, &port->dev, __func__,
1219 firsthalf, &fifo->fifo[fifo->head]);
1220
1221 /* update the index and size */
1222 fifo->head += firsthalf;
1223 fifo->count += firsthalf;
1224
1225 /* wrap the index */
1226 if (fifo->head == fifo->size)
1227 fifo->head = 0;
1228
1229 secondhalf = copySize-firsthalf;
1230
1231 if (secondhalf) {
1232 dbg("%s - copy rest of data %d", __func__, secondhalf);
1233 memcpy(&fifo->fifo[fifo->head], &data[firsthalf], secondhalf);
1234 usb_serial_debug_data(debug, &port->dev, __func__,
1235 secondhalf, &fifo->fifo[fifo->head]);
1236 /* update the index and size */
1237 fifo->count += secondhalf;
1238 fifo->head += secondhalf;
1239 /* No need to check for wrap since we can not get to end of
1240 * the fifo in this part
1241 */
1242 }
1243
1244 finish_write:
1245 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
1246
1247 send_more_port_data((struct edgeport_serial *)
1248 usb_get_serial_data(port->serial), edge_port);
1249
1250 dbg("%s wrote %d byte(s) TxCredits %d, Fifo %d", __func__,
1251 copySize, edge_port->txCredits, fifo->count);
1252
1253 return copySize;
1254 }
1255
1256
1257 /************************************************************************
1258 *
1259 * send_more_port_data()
1260 *
1261 * This routine attempts to write additional UART transmit data
1262 * to a port over the USB bulk pipe. It is called (1) when new
1263 * data has been written to a port's TxBuffer from higher layers
1264 * (2) when the peripheral sends us additional TxCredits indicating
1265 * that it can accept more Tx data for a given port; and (3) when
1266 * a bulk write completes successfully and we want to see if we
1267 * can transmit more.
1268 *
1269 ************************************************************************/
1270 static void send_more_port_data(struct edgeport_serial *edge_serial,
1271 struct edgeport_port *edge_port)
1272 {
1273 struct TxFifo *fifo = &edge_port->txfifo;
1274 struct urb *urb;
1275 unsigned char *buffer;
1276 int status;
1277 int count;
1278 int bytesleft;
1279 int firsthalf;
1280 int secondhalf;
1281 unsigned long flags;
1282
1283 dbg("%s(%d)", __func__, edge_port->port->number);
1284
1285 spin_lock_irqsave(&edge_port->ep_lock, flags);
1286
1287 if (edge_port->write_in_progress ||
1288 !edge_port->open ||
1289 (fifo->count == 0)) {
1290 dbg("%s(%d) EXIT - fifo %d, PendingWrite = %d",
1291 __func__, edge_port->port->number,
1292 fifo->count, edge_port->write_in_progress);
1293 goto exit_send;
1294 }
1295
1296 /* since the amount of data in the fifo will always fit into the
1297 * edgeport buffer we do not need to check the write length
1298 *
1299 * Do we have enough credits for this port to make it worthwhile
1300 * to bother queueing a write. If it's too small, say a few bytes,
1301 * it's better to wait for more credits so we can do a larger write.
1302 */
1303 if (edge_port->txCredits < EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(edge_port->maxTxCredits, EDGE_FW_BULK_MAX_PACKET_SIZE)) {
1304 dbg("%s(%d) Not enough credit - fifo %d TxCredit %d",
1305 __func__, edge_port->port->number, fifo->count,
1306 edge_port->txCredits);
1307 goto exit_send;
1308 }
1309
1310 /* lock this write */
1311 edge_port->write_in_progress = true;
1312
1313 /* get a pointer to the write_urb */
1314 urb = edge_port->write_urb;
1315
1316 /* make sure transfer buffer is freed */
1317 kfree(urb->transfer_buffer);
1318 urb->transfer_buffer = NULL;
1319
1320 /* build the data header for the buffer and port that we are about
1321 to send out */
1322 count = fifo->count;
1323 buffer = kmalloc(count+2, GFP_ATOMIC);
1324 if (buffer == NULL) {
1325 dev_err(&edge_port->port->dev,
1326 "%s - no more kernel memory...\n", __func__);
1327 edge_port->write_in_progress = false;
1328 goto exit_send;
1329 }
1330 buffer[0] = IOSP_BUILD_DATA_HDR1(edge_port->port->number
1331 - edge_port->port->serial->minor, count);
1332 buffer[1] = IOSP_BUILD_DATA_HDR2(edge_port->port->number
1333 - edge_port->port->serial->minor, count);
1334
1335 /* now copy our data */
1336 bytesleft = fifo->size - fifo->tail;
1337 firsthalf = min(bytesleft, count);
1338 memcpy(&buffer[2], &fifo->fifo[fifo->tail], firsthalf);
1339 fifo->tail += firsthalf;
1340 fifo->count -= firsthalf;
1341 if (fifo->tail == fifo->size)
1342 fifo->tail = 0;
1343
1344 secondhalf = count-firsthalf;
1345 if (secondhalf) {
1346 memcpy(&buffer[2+firsthalf], &fifo->fifo[fifo->tail],
1347 secondhalf);
1348 fifo->tail += secondhalf;
1349 fifo->count -= secondhalf;
1350 }
1351
1352 if (count)
1353 usb_serial_debug_data(debug, &edge_port->port->dev,
1354 __func__, count, &buffer[2]);
1355
1356 /* fill up the urb with all of our data and submit it */
1357 usb_fill_bulk_urb(urb, edge_serial->serial->dev,
1358 usb_sndbulkpipe(edge_serial->serial->dev,
1359 edge_serial->bulk_out_endpoint),
1360 buffer, count+2,
1361 edge_bulk_out_data_callback, edge_port);
1362
1363 /* decrement the number of credits we have by the number we just sent */
1364 edge_port->txCredits -= count;
1365 edge_port->icount.tx += count;
1366
1367 urb->dev = edge_serial->serial->dev;
1368 status = usb_submit_urb(urb, GFP_ATOMIC);
1369 if (status) {
1370 /* something went wrong */
1371 dev_err(&edge_port->port->dev,
1372 "%s - usb_submit_urb(write bulk) failed, status = %d, data lost\n",
1373 __func__, status);
1374 edge_port->write_in_progress = false;
1375
1376 /* revert the credits as something bad happened. */
1377 edge_port->txCredits += count;
1378 edge_port->icount.tx -= count;
1379 }
1380 dbg("%s wrote %d byte(s) TxCredit %d, Fifo %d",
1381 __func__, count, edge_port->txCredits, fifo->count);
1382
1383 exit_send:
1384 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
1385 }
1386
1387
1388 /*****************************************************************************
1389 * edge_write_room
1390 * this function is called by the tty driver when it wants to know how
1391 * many bytes of data we can accept for a specific port. If successful,
1392 * we return the amount of room that we have for this port (the txCredits)
1393 * otherwise we return a negative error number.
1394 *****************************************************************************/
1395 static int edge_write_room(struct tty_struct *tty)
1396 {
1397 struct usb_serial_port *port = tty->driver_data;
1398 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1399 int room;
1400 unsigned long flags;
1401
1402 dbg("%s", __func__);
1403
1404 if (edge_port == NULL)
1405 return 0;
1406 if (edge_port->closePending)
1407 return 0;
1408
1409 dbg("%s - port %d", __func__, port->number);
1410
1411 if (!edge_port->open) {
1412 dbg("%s - port not opened", __func__);
1413 return 0;
1414 }
1415
1416 /* total of both buffers is still txCredit */
1417 spin_lock_irqsave(&edge_port->ep_lock, flags);
1418 room = edge_port->txCredits - edge_port->txfifo.count;
1419 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
1420
1421 dbg("%s - returns %d", __func__, room);
1422 return room;
1423 }
1424
1425
1426 /*****************************************************************************
1427 * edge_chars_in_buffer
1428 * this function is called by the tty driver when it wants to know how
1429 * many bytes of data we currently have outstanding in the port (data that
1430 * has been written, but hasn't made it out the port yet)
1431 * If successful, we return the number of bytes left to be written in the
1432 * system,
1433 * Otherwise we return a negative error number.
1434 *****************************************************************************/
1435 static int edge_chars_in_buffer(struct tty_struct *tty)
1436 {
1437 struct usb_serial_port *port = tty->driver_data;
1438 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1439 int num_chars;
1440 unsigned long flags;
1441
1442 dbg("%s", __func__);
1443
1444 if (edge_port == NULL)
1445 return 0;
1446 if (edge_port->closePending)
1447 return 0;
1448
1449 if (!edge_port->open) {
1450 dbg("%s - port not opened", __func__);
1451 return 0;
1452 }
1453
1454 spin_lock_irqsave(&edge_port->ep_lock, flags);
1455 num_chars = edge_port->maxTxCredits - edge_port->txCredits +
1456 edge_port->txfifo.count;
1457 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
1458 if (num_chars) {
1459 dbg("%s(port %d) - returns %d", __func__,
1460 port->number, num_chars);
1461 }
1462
1463 return num_chars;
1464 }
1465
1466
1467 /*****************************************************************************
1468 * SerialThrottle
1469 * this function is called by the tty driver when it wants to stop the data
1470 * being read from the port.
1471 *****************************************************************************/
1472 static void edge_throttle(struct tty_struct *tty)
1473 {
1474 struct usb_serial_port *port = tty->driver_data;
1475 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1476 int status;
1477
1478 dbg("%s - port %d", __func__, port->number);
1479
1480 if (edge_port == NULL)
1481 return;
1482
1483 if (!edge_port->open) {
1484 dbg("%s - port not opened", __func__);
1485 return;
1486 }
1487
1488 /* if we are implementing XON/XOFF, send the stop character */
1489 if (I_IXOFF(tty)) {
1490 unsigned char stop_char = STOP_CHAR(tty);
1491 status = edge_write(tty, port, &stop_char, 1);
1492 if (status <= 0)
1493 return;
1494 }
1495
1496 /* if we are implementing RTS/CTS, toggle that line */
1497 if (tty->termios->c_cflag & CRTSCTS) {
1498 edge_port->shadowMCR &= ~MCR_RTS;
1499 status = send_cmd_write_uart_register(edge_port, MCR,
1500 edge_port->shadowMCR);
1501 if (status != 0)
1502 return;
1503 }
1504
1505 return;
1506 }
1507
1508
1509 /*****************************************************************************
1510 * edge_unthrottle
1511 * this function is called by the tty driver when it wants to resume the
1512 * data being read from the port (called after SerialThrottle is called)
1513 *****************************************************************************/
1514 static void edge_unthrottle(struct tty_struct *tty)
1515 {
1516 struct usb_serial_port *port = tty->driver_data;
1517 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1518 int status;
1519
1520 dbg("%s - port %d", __func__, port->number);
1521
1522 if (edge_port == NULL)
1523 return;
1524
1525 if (!edge_port->open) {
1526 dbg("%s - port not opened", __func__);
1527 return;
1528 }
1529
1530 /* if we are implementing XON/XOFF, send the start character */
1531 if (I_IXOFF(tty)) {
1532 unsigned char start_char = START_CHAR(tty);
1533 status = edge_write(tty, port, &start_char, 1);
1534 if (status <= 0)
1535 return;
1536 }
1537 /* if we are implementing RTS/CTS, toggle that line */
1538 if (tty->termios->c_cflag & CRTSCTS) {
1539 edge_port->shadowMCR |= MCR_RTS;
1540 send_cmd_write_uart_register(edge_port, MCR,
1541 edge_port->shadowMCR);
1542 }
1543 }
1544
1545
1546 /*****************************************************************************
1547 * SerialSetTermios
1548 * this function is called by the tty driver when it wants to change
1549 * the termios structure
1550 *****************************************************************************/
1551 static void edge_set_termios(struct tty_struct *tty,
1552 struct usb_serial_port *port, struct ktermios *old_termios)
1553 {
1554 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1555 unsigned int cflag;
1556
1557 cflag = tty->termios->c_cflag;
1558 dbg("%s - clfag %08x iflag %08x", __func__,
1559 tty->termios->c_cflag, tty->termios->c_iflag);
1560 dbg("%s - old clfag %08x old iflag %08x", __func__,
1561 old_termios->c_cflag, old_termios->c_iflag);
1562
1563 dbg("%s - port %d", __func__, port->number);
1564
1565 if (edge_port == NULL)
1566 return;
1567
1568 if (!edge_port->open) {
1569 dbg("%s - port not opened", __func__);
1570 return;
1571 }
1572
1573 /* change the port settings to the new ones specified */
1574 change_port_settings(tty, edge_port, old_termios);
1575 }
1576
1577
1578 /*****************************************************************************
1579 * get_lsr_info - get line status register info
1580 *
1581 * Purpose: Let user call ioctl() to get info when the UART physically
1582 * is emptied. On bus types like RS485, the transmitter must
1583 * release the bus after transmitting. This must be done when
1584 * the transmit shift register is empty, not be done when the
1585 * transmit holding register is empty. This functionality
1586 * allows an RS485 driver to be written in user space.
1587 *****************************************************************************/
1588 static int get_lsr_info(struct edgeport_port *edge_port,
1589 unsigned int __user *value)
1590 {
1591 unsigned int result = 0;
1592 unsigned long flags;
1593
1594 spin_lock_irqsave(&edge_port->ep_lock, flags);
1595 if (edge_port->maxTxCredits == edge_port->txCredits &&
1596 edge_port->txfifo.count == 0) {
1597 dbg("%s -- Empty", __func__);
1598 result = TIOCSER_TEMT;
1599 }
1600 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
1601
1602 if (copy_to_user(value, &result, sizeof(int)))
1603 return -EFAULT;
1604 return 0;
1605 }
1606
1607 static int edge_tiocmset(struct tty_struct *tty, struct file *file,
1608 unsigned int set, unsigned int clear)
1609 {
1610 struct usb_serial_port *port = tty->driver_data;
1611 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1612 unsigned int mcr;
1613
1614 dbg("%s - port %d", __func__, port->number);
1615
1616 mcr = edge_port->shadowMCR;
1617 if (set & TIOCM_RTS)
1618 mcr |= MCR_RTS;
1619 if (set & TIOCM_DTR)
1620 mcr |= MCR_DTR;
1621 if (set & TIOCM_LOOP)
1622 mcr |= MCR_LOOPBACK;
1623
1624 if (clear & TIOCM_RTS)
1625 mcr &= ~MCR_RTS;
1626 if (clear & TIOCM_DTR)
1627 mcr &= ~MCR_DTR;
1628 if (clear & TIOCM_LOOP)
1629 mcr &= ~MCR_LOOPBACK;
1630
1631 edge_port->shadowMCR = mcr;
1632
1633 send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR);
1634
1635 return 0;
1636 }
1637
1638 static int edge_tiocmget(struct tty_struct *tty, struct file *file)
1639 {
1640 struct usb_serial_port *port = tty->driver_data;
1641 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1642 unsigned int result = 0;
1643 unsigned int msr;
1644 unsigned int mcr;
1645
1646 dbg("%s - port %d", __func__, port->number);
1647
1648 msr = edge_port->shadowMSR;
1649 mcr = edge_port->shadowMCR;
1650 result = ((mcr & MCR_DTR) ? TIOCM_DTR: 0) /* 0x002 */
1651 | ((mcr & MCR_RTS) ? TIOCM_RTS: 0) /* 0x004 */
1652 | ((msr & EDGEPORT_MSR_CTS) ? TIOCM_CTS: 0) /* 0x020 */
1653 | ((msr & EDGEPORT_MSR_CD) ? TIOCM_CAR: 0) /* 0x040 */
1654 | ((msr & EDGEPORT_MSR_RI) ? TIOCM_RI: 0) /* 0x080 */
1655 | ((msr & EDGEPORT_MSR_DSR) ? TIOCM_DSR: 0); /* 0x100 */
1656
1657
1658 dbg("%s -- %x", __func__, result);
1659
1660 return result;
1661 }
1662
1663 static int get_serial_info(struct edgeport_port *edge_port,
1664 struct serial_struct __user *retinfo)
1665 {
1666 struct serial_struct tmp;
1667
1668 if (!retinfo)
1669 return -EFAULT;
1670
1671 memset(&tmp, 0, sizeof(tmp));
1672
1673 tmp.type = PORT_16550A;
1674 tmp.line = edge_port->port->serial->minor;
1675 tmp.port = edge_port->port->number;
1676 tmp.irq = 0;
1677 tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
1678 tmp.xmit_fifo_size = edge_port->maxTxCredits;
1679 tmp.baud_base = 9600;
1680 tmp.close_delay = 5*HZ;
1681 tmp.closing_wait = 30*HZ;
1682
1683 if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
1684 return -EFAULT;
1685 return 0;
1686 }
1687
1688
1689
1690 /*****************************************************************************
1691 * SerialIoctl
1692 * this function handles any ioctl calls to the driver
1693 *****************************************************************************/
1694 static int edge_ioctl(struct tty_struct *tty, struct file *file,
1695 unsigned int cmd, unsigned long arg)
1696 {
1697 struct usb_serial_port *port = tty->driver_data;
1698 DEFINE_WAIT(wait);
1699 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1700 struct async_icount cnow;
1701 struct async_icount cprev;
1702 struct serial_icounter_struct icount;
1703
1704 dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
1705
1706 switch (cmd) {
1707 case TIOCSERGETLSR:
1708 dbg("%s (%d) TIOCSERGETLSR", __func__, port->number);
1709 return get_lsr_info(edge_port, (unsigned int __user *) arg);
1710
1711 case TIOCGSERIAL:
1712 dbg("%s (%d) TIOCGSERIAL", __func__, port->number);
1713 return get_serial_info(edge_port, (struct serial_struct __user *) arg);
1714
1715 case TIOCMIWAIT:
1716 dbg("%s (%d) TIOCMIWAIT", __func__, port->number);
1717 cprev = edge_port->icount;
1718 while (1) {
1719 prepare_to_wait(&edge_port->delta_msr_wait,
1720 &wait, TASK_INTERRUPTIBLE);
1721 schedule();
1722 finish_wait(&edge_port->delta_msr_wait, &wait);
1723 /* see if a signal did it */
1724 if (signal_pending(current))
1725 return -ERESTARTSYS;
1726 cnow = edge_port->icount;
1727 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
1728 cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
1729 return -EIO; /* no change => error */
1730 if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
1731 ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
1732 ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
1733 ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
1734 return 0;
1735 }
1736 cprev = cnow;
1737 }
1738 /* NOTREACHED */
1739 break;
1740
1741 case TIOCGICOUNT:
1742 cnow = edge_port->icount;
1743 memset(&icount, 0, sizeof(icount));
1744 icount.cts = cnow.cts;
1745 icount.dsr = cnow.dsr;
1746 icount.rng = cnow.rng;
1747 icount.dcd = cnow.dcd;
1748 icount.rx = cnow.rx;
1749 icount.tx = cnow.tx;
1750 icount.frame = cnow.frame;
1751 icount.overrun = cnow.overrun;
1752 icount.parity = cnow.parity;
1753 icount.brk = cnow.brk;
1754 icount.buf_overrun = cnow.buf_overrun;
1755
1756 dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d",
1757 __func__, port->number, icount.rx, icount.tx);
1758 if (copy_to_user((void __user *)arg, &icount, sizeof(icount)))
1759 return -EFAULT;
1760 return 0;
1761 }
1762 return -ENOIOCTLCMD;
1763 }
1764
1765
1766 /*****************************************************************************
1767 * SerialBreak
1768 * this function sends a break to the port
1769 *****************************************************************************/
1770 static void edge_break(struct tty_struct *tty, int break_state)
1771 {
1772 struct usb_serial_port *port = tty->driver_data;
1773 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1774 struct edgeport_serial *edge_serial = usb_get_serial_data(port->serial);
1775 int status;
1776
1777 if ((!edge_serial->is_epic) ||
1778 ((edge_serial->is_epic) &&
1779 (edge_serial->epic_descriptor.Supports.IOSPChase))) {
1780 /* flush and chase */
1781 edge_port->chaseResponsePending = true;
1782
1783 dbg("%s - Sending IOSP_CMD_CHASE_PORT", __func__);
1784 status = send_iosp_ext_cmd(edge_port, IOSP_CMD_CHASE_PORT, 0);
1785 if (status == 0) {
1786 /* block until chase finished */
1787 block_until_chase_response(edge_port);
1788 } else {
1789 edge_port->chaseResponsePending = false;
1790 }
1791 }
1792
1793 if ((!edge_serial->is_epic) ||
1794 ((edge_serial->is_epic) &&
1795 (edge_serial->epic_descriptor.Supports.IOSPSetClrBreak))) {
1796 if (break_state == -1) {
1797 dbg("%s - Sending IOSP_CMD_SET_BREAK", __func__);
1798 status = send_iosp_ext_cmd(edge_port,
1799 IOSP_CMD_SET_BREAK, 0);
1800 } else {
1801 dbg("%s - Sending IOSP_CMD_CLEAR_BREAK", __func__);
1802 status = send_iosp_ext_cmd(edge_port,
1803 IOSP_CMD_CLEAR_BREAK, 0);
1804 }
1805 if (status)
1806 dbg("%s - error sending break set/clear command.",
1807 __func__);
1808 }
1809
1810 return;
1811 }
1812
1813
1814 /*****************************************************************************
1815 * process_rcvd_data
1816 * this function handles the data received on the bulk in pipe.
1817 *****************************************************************************/
1818 static void process_rcvd_data(struct edgeport_serial *edge_serial,
1819 unsigned char *buffer, __u16 bufferLength)
1820 {
1821 struct usb_serial_port *port;
1822 struct edgeport_port *edge_port;
1823 struct tty_struct *tty;
1824 __u16 lastBufferLength;
1825 __u16 rxLen;
1826
1827 dbg("%s", __func__);
1828
1829 lastBufferLength = bufferLength + 1;
1830
1831 while (bufferLength > 0) {
1832 /* failsafe incase we get a message that we don't understand */
1833 if (lastBufferLength == bufferLength) {
1834 dbg("%s - stuck in loop, exiting it.", __func__);
1835 break;
1836 }
1837 lastBufferLength = bufferLength;
1838
1839 switch (edge_serial->rxState) {
1840 case EXPECT_HDR1:
1841 edge_serial->rxHeader1 = *buffer;
1842 ++buffer;
1843 --bufferLength;
1844
1845 if (bufferLength == 0) {
1846 edge_serial->rxState = EXPECT_HDR2;
1847 break;
1848 }
1849 /* otherwise, drop on through */
1850 case EXPECT_HDR2:
1851 edge_serial->rxHeader2 = *buffer;
1852 ++buffer;
1853 --bufferLength;
1854
1855 dbg("%s - Hdr1=%02X Hdr2=%02X", __func__,
1856 edge_serial->rxHeader1, edge_serial->rxHeader2);
1857 /* Process depending on whether this header is
1858 * data or status */
1859
1860 if (IS_CMD_STAT_HDR(edge_serial->rxHeader1)) {
1861 /* Decode this status header and go to
1862 * EXPECT_HDR1 (if we can process the status
1863 * with only 2 bytes), or go to EXPECT_HDR3 to
1864 * get the third byte. */
1865 edge_serial->rxPort =
1866 IOSP_GET_HDR_PORT(edge_serial->rxHeader1);
1867 edge_serial->rxStatusCode =
1868 IOSP_GET_STATUS_CODE(
1869 edge_serial->rxHeader1);
1870
1871 if (!IOSP_STATUS_IS_2BYTE(
1872 edge_serial->rxStatusCode)) {
1873 /* This status needs additional bytes.
1874 * Save what we have and then wait for
1875 * more data.
1876 */
1877 edge_serial->rxStatusParam
1878 = edge_serial->rxHeader2;
1879 edge_serial->rxState = EXPECT_HDR3;
1880 break;
1881 }
1882 /* We have all the header bytes, process the
1883 status now */
1884 process_rcvd_status(edge_serial,
1885 edge_serial->rxHeader2, 0);
1886 edge_serial->rxState = EXPECT_HDR1;
1887 break;
1888 } else {
1889 edge_serial->rxPort =
1890 IOSP_GET_HDR_PORT(edge_serial->rxHeader1);
1891 edge_serial->rxBytesRemaining =
1892 IOSP_GET_HDR_DATA_LEN(
1893 edge_serial->rxHeader1,
1894 edge_serial->rxHeader2);
1895 dbg("%s - Data for Port %u Len %u",
1896 __func__,
1897 edge_serial->rxPort,
1898 edge_serial->rxBytesRemaining);
1899
1900 /* ASSERT(DevExt->RxPort < DevExt->NumPorts);
1901 * ASSERT(DevExt->RxBytesRemaining <
1902 * IOSP_MAX_DATA_LENGTH);
1903 */
1904
1905 if (bufferLength == 0) {
1906 edge_serial->rxState = EXPECT_DATA;
1907 break;
1908 }
1909 /* Else, drop through */
1910 }
1911 case EXPECT_DATA: /* Expect data */
1912 if (bufferLength < edge_serial->rxBytesRemaining) {
1913 rxLen = bufferLength;
1914 /* Expect data to start next buffer */
1915 edge_serial->rxState = EXPECT_DATA;
1916 } else {
1917 /* BufLen >= RxBytesRemaining */
1918 rxLen = edge_serial->rxBytesRemaining;
1919 /* Start another header next time */
1920 edge_serial->rxState = EXPECT_HDR1;
1921 }
1922
1923 bufferLength -= rxLen;
1924 edge_serial->rxBytesRemaining -= rxLen;
1925
1926 /* spit this data back into the tty driver if this
1927 port is open */
1928 if (rxLen) {
1929 port = edge_serial->serial->port[
1930 edge_serial->rxPort];
1931 edge_port = usb_get_serial_port_data(port);
1932 if (edge_port->open) {
1933 tty = tty_port_tty_get(
1934 &edge_port->port->port);
1935 if (tty) {
1936 dbg("%s - Sending %d bytes to TTY for port %d",
1937 __func__, rxLen, edge_serial->rxPort);
1938 edge_tty_recv(&edge_serial->serial->dev->dev, tty, buffer, rxLen);
1939 tty_kref_put(tty);
1940 }
1941 edge_port->icount.rx += rxLen;
1942 }
1943 buffer += rxLen;
1944 }
1945 break;
1946
1947 case EXPECT_HDR3: /* Expect 3rd byte of status header */
1948 edge_serial->rxHeader3 = *buffer;
1949 ++buffer;
1950 --bufferLength;
1951
1952 /* We have all the header bytes, process the
1953 status now */
1954 process_rcvd_status(edge_serial,
1955 edge_serial->rxStatusParam,
1956 edge_serial->rxHeader3);
1957 edge_serial->rxState = EXPECT_HDR1;
1958 break;
1959 }
1960 }
1961 }
1962
1963
1964 /*****************************************************************************
1965 * process_rcvd_status
1966 * this function handles the any status messages received on the
1967 * bulk in pipe.
1968 *****************************************************************************/
1969 static void process_rcvd_status(struct edgeport_serial *edge_serial,
1970 __u8 byte2, __u8 byte3)
1971 {
1972 struct usb_serial_port *port;
1973 struct edgeport_port *edge_port;
1974 struct tty_struct *tty;
1975 __u8 code = edge_serial->rxStatusCode;
1976
1977 /* switch the port pointer to the one being currently talked about */
1978 port = edge_serial->serial->port[edge_serial->rxPort];
1979 edge_port = usb_get_serial_port_data(port);
1980 if (edge_port == NULL) {
1981 dev_err(&edge_serial->serial->dev->dev,
1982 "%s - edge_port == NULL for port %d\n",
1983 __func__, edge_serial->rxPort);
1984 return;
1985 }
1986
1987 dbg("%s - port %d", __func__, edge_serial->rxPort);
1988
1989 if (code == IOSP_EXT_STATUS) {
1990 switch (byte2) {
1991 case IOSP_EXT_STATUS_CHASE_RSP:
1992 /* we want to do EXT status regardless of port
1993 * open/closed */
1994 dbg("%s - Port %u EXT CHASE_RSP Data = %02x",
1995 __func__, edge_serial->rxPort, byte3);
1996 /* Currently, the only EXT_STATUS is Chase, so process
1997 * here instead of one more call to one more subroutine
1998 * If/when more EXT_STATUS, there'll be more work to do
1999 * Also, we currently clear flag and close the port
2000 * regardless of content of above's Byte3.
2001 * We could choose to do something else when Byte3 says
2002 * Timeout on Chase from Edgeport, like wait longer in
2003 * block_until_chase_response, but for now we don't.
2004 */
2005 edge_port->chaseResponsePending = false;
2006 wake_up(&edge_port->wait_chase);
2007 return;
2008
2009 case IOSP_EXT_STATUS_RX_CHECK_RSP:
2010 dbg("%s ========== Port %u CHECK_RSP Sequence = %02x =============\n", __func__, edge_serial->rxPort, byte3);
2011 /* Port->RxCheckRsp = true; */
2012 return;
2013 }
2014 }
2015
2016 if (code == IOSP_STATUS_OPEN_RSP) {
2017 edge_port->txCredits = GET_TX_BUFFER_SIZE(byte3);
2018 edge_port->maxTxCredits = edge_port->txCredits;
2019 dbg("%s - Port %u Open Response Inital MSR = %02x TxBufferSize = %d", __func__, edge_serial->rxPort, byte2, edge_port->txCredits);
2020 handle_new_msr(edge_port, byte2);
2021
2022 /* send the current line settings to the port so we are
2023 in sync with any further termios calls */
2024 tty = tty_port_tty_get(&edge_port->port->port);
2025 if (tty) {
2026 change_port_settings(tty,
2027 edge_port, tty->termios);
2028 tty_kref_put(tty);
2029 }
2030
2031 /* we have completed the open */
2032 edge_port->openPending = false;
2033 edge_port->open = true;
2034 wake_up(&edge_port->wait_open);
2035 return;
2036 }
2037
2038 /* If port is closed, silently discard all rcvd status. We can
2039 * have cases where buffered status is received AFTER the close
2040 * port command is sent to the Edgeport.
2041 */
2042 if (!edge_port->open || edge_port->closePending)
2043 return;
2044
2045 switch (code) {
2046 /* Not currently sent by Edgeport */
2047 case IOSP_STATUS_LSR:
2048 dbg("%s - Port %u LSR Status = %02x",
2049 __func__, edge_serial->rxPort, byte2);
2050 handle_new_lsr(edge_port, false, byte2, 0);
2051 break;
2052
2053 case IOSP_STATUS_LSR_DATA:
2054 dbg("%s - Port %u LSR Status = %02x, Data = %02x",
2055 __func__, edge_serial->rxPort, byte2, byte3);
2056 /* byte2 is LSR Register */
2057 /* byte3 is broken data byte */
2058 handle_new_lsr(edge_port, true, byte2, byte3);
2059 break;
2060 /*
2061 * case IOSP_EXT_4_STATUS:
2062 * dbg("%s - Port %u LSR Status = %02x Data = %02x",
2063 * __func__, edge_serial->rxPort, byte2, byte3);
2064 * break;
2065 */
2066 case IOSP_STATUS_MSR:
2067 dbg("%s - Port %u MSR Status = %02x",
2068 __func__, edge_serial->rxPort, byte2);
2069 /*
2070 * Process this new modem status and generate appropriate
2071 * events, etc, based on the new status. This routine
2072 * also saves the MSR in Port->ShadowMsr.
2073 */
2074 handle_new_msr(edge_port, byte2);
2075 break;
2076
2077 default:
2078 dbg("%s - Unrecognized IOSP status code %u\n", __func__, code);
2079 break;
2080 }
2081 return;
2082 }
2083
2084
2085 /*****************************************************************************
2086 * edge_tty_recv
2087 * this function passes data on to the tty flip buffer
2088 *****************************************************************************/
2089 static void edge_tty_recv(struct device *dev, struct tty_struct *tty,
2090 unsigned char *data, int length)
2091 {
2092 int cnt;
2093
2094 do {
2095 cnt = tty_buffer_request_room(tty, length);
2096 if (cnt < length) {
2097 dev_err(dev, "%s - dropping data, %d bytes lost\n",
2098 __func__, length - cnt);
2099 if (cnt == 0)
2100 break;
2101 }
2102 tty_insert_flip_string(tty, data, cnt);
2103 data += cnt;
2104 length -= cnt;
2105 } while (length > 0);
2106
2107 tty_flip_buffer_push(tty);
2108 }
2109
2110
2111 /*****************************************************************************
2112 * handle_new_msr
2113 * this function handles any change to the msr register for a port.
2114 *****************************************************************************/
2115 static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr)
2116 {
2117 struct async_icount *icount;
2118
2119 dbg("%s %02x", __func__, newMsr);
2120
2121 if (newMsr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR |
2122 EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) {
2123 icount = &edge_port->icount;
2124
2125 /* update input line counters */
2126 if (newMsr & EDGEPORT_MSR_DELTA_CTS)
2127 icount->cts++;
2128 if (newMsr & EDGEPORT_MSR_DELTA_DSR)
2129 icount->dsr++;
2130 if (newMsr & EDGEPORT_MSR_DELTA_CD)
2131 icount->dcd++;
2132 if (newMsr & EDGEPORT_MSR_DELTA_RI)
2133 icount->rng++;
2134 wake_up_interruptible(&edge_port->delta_msr_wait);
2135 }
2136
2137 /* Save the new modem status */
2138 edge_port->shadowMSR = newMsr & 0xf0;
2139
2140 return;
2141 }
2142
2143
2144 /*****************************************************************************
2145 * handle_new_lsr
2146 * this function handles any change to the lsr register for a port.
2147 *****************************************************************************/
2148 static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData,
2149 __u8 lsr, __u8 data)
2150 {
2151 __u8 newLsr = (__u8) (lsr & (__u8)
2152 (LSR_OVER_ERR | LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK));
2153 struct async_icount *icount;
2154
2155 dbg("%s - %02x", __func__, newLsr);
2156
2157 edge_port->shadowLSR = lsr;
2158
2159 if (newLsr & LSR_BREAK) {
2160 /*
2161 * Parity and Framing errors only count if they
2162 * occur exclusive of a break being
2163 * received.
2164 */
2165 newLsr &= (__u8)(LSR_OVER_ERR | LSR_BREAK);
2166 }
2167
2168 /* Place LSR data byte into Rx buffer */
2169 if (lsrData) {
2170 struct tty_struct *tty =
2171 tty_port_tty_get(&edge_port->port->port);
2172 if (tty) {
2173 edge_tty_recv(&edge_port->port->dev, tty, &data, 1);
2174 tty_kref_put(tty);
2175 }
2176 }
2177 /* update input line counters */
2178 icount = &edge_port->icount;
2179 if (newLsr & LSR_BREAK)
2180 icount->brk++;
2181 if (newLsr & LSR_OVER_ERR)
2182 icount->overrun++;
2183 if (newLsr & LSR_PAR_ERR)
2184 icount->parity++;
2185 if (newLsr & LSR_FRM_ERR)
2186 icount->frame++;
2187
2188 return;
2189 }
2190
2191
2192 /****************************************************************************
2193 * sram_write
2194 * writes a number of bytes to the Edgeport device's sram starting at the
2195 * given address.
2196 * If successful returns the number of bytes written, otherwise it returns
2197 * a negative error number of the problem.
2198 ****************************************************************************/
2199 static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
2200 __u16 length, const __u8 *data)
2201 {
2202 int result;
2203 __u16 current_length;
2204 unsigned char *transfer_buffer;
2205
2206 dbg("%s - %x, %x, %d", __func__, extAddr, addr, length);
2207
2208 transfer_buffer = kmalloc(64, GFP_KERNEL);
2209 if (!transfer_buffer) {
2210 dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n",
2211 __func__, 64);
2212 return -ENOMEM;
2213 }
2214
2215 /* need to split these writes up into 64 byte chunks */
2216 result = 0;
2217 while (length > 0) {
2218 if (length > 64)
2219 current_length = 64;
2220 else
2221 current_length = length;
2222
2223 /* dbg("%s - writing %x, %x, %d", __func__,
2224 extAddr, addr, current_length); */
2225 memcpy(transfer_buffer, data, current_length);
2226 result = usb_control_msg(serial->dev,
2227 usb_sndctrlpipe(serial->dev, 0),
2228 USB_REQUEST_ION_WRITE_RAM,
2229 0x40, addr, extAddr, transfer_buffer,
2230 current_length, 300);
2231 if (result < 0)
2232 break;
2233 length -= current_length;
2234 addr += current_length;
2235 data += current_length;
2236 }
2237
2238 kfree(transfer_buffer);
2239 return result;
2240 }
2241
2242
2243 /****************************************************************************
2244 * rom_write
2245 * writes a number of bytes to the Edgeport device's ROM starting at the
2246 * given address.
2247 * If successful returns the number of bytes written, otherwise it returns
2248 * a negative error number of the problem.
2249 ****************************************************************************/
2250 static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
2251 __u16 length, const __u8 *data)
2252 {
2253 int result;
2254 __u16 current_length;
2255 unsigned char *transfer_buffer;
2256
2257 /* dbg("%s - %x, %x, %d", __func__, extAddr, addr, length); */
2258
2259 transfer_buffer = kmalloc(64, GFP_KERNEL);
2260 if (!transfer_buffer) {
2261 dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n",
2262 __func__, 64);
2263 return -ENOMEM;
2264 }
2265
2266 /* need to split these writes up into 64 byte chunks */
2267 result = 0;
2268 while (length > 0) {
2269 if (length > 64)
2270 current_length = 64;
2271 else
2272 current_length = length;
2273 /* dbg("%s - writing %x, %x, %d", __func__,
2274 extAddr, addr, current_length); */
2275 memcpy(transfer_buffer, data, current_length);
2276 result = usb_control_msg(serial->dev,
2277 usb_sndctrlpipe(serial->dev, 0),
2278 USB_REQUEST_ION_WRITE_ROM, 0x40,
2279 addr, extAddr,
2280 transfer_buffer, current_length, 300);
2281 if (result < 0)
2282 break;
2283 length -= current_length;
2284 addr += current_length;
2285 data += current_length;
2286 }
2287
2288 kfree(transfer_buffer);
2289 return result;
2290 }
2291
2292
2293 /****************************************************************************
2294 * rom_read
2295 * reads a number of bytes from the Edgeport device starting at the given
2296 * address.
2297 * If successful returns the number of bytes read, otherwise it returns
2298 * a negative error number of the problem.
2299 ****************************************************************************/
2300 static int rom_read(struct usb_serial *serial, __u16 extAddr,
2301 __u16 addr, __u16 length, __u8 *data)
2302 {
2303 int result;
2304 __u16 current_length;
2305 unsigned char *transfer_buffer;
2306
2307 dbg("%s - %x, %x, %d", __func__, extAddr, addr, length);
2308
2309 transfer_buffer = kmalloc(64, GFP_KERNEL);
2310 if (!transfer_buffer) {
2311 dev_err(&serial->dev->dev,
2312 "%s - kmalloc(%d) failed.\n", __func__, 64);
2313 return -ENOMEM;
2314 }
2315
2316 /* need to split these reads up into 64 byte chunks */
2317 result = 0;
2318 while (length > 0) {
2319 if (length > 64)
2320 current_length = 64;
2321 else
2322 current_length = length;
2323 /* dbg("%s - %x, %x, %d", __func__,
2324 extAddr, addr, current_length); */
2325 result = usb_control_msg(serial->dev,
2326 usb_rcvctrlpipe(serial->dev, 0),
2327 USB_REQUEST_ION_READ_ROM,
2328 0xC0, addr, extAddr, transfer_buffer,
2329 current_length, 300);
2330 if (result < 0)
2331 break;
2332 memcpy(data, transfer_buffer, current_length);
2333 length -= current_length;
2334 addr += current_length;
2335 data += current_length;
2336 }
2337
2338 kfree(transfer_buffer);
2339 return result;
2340 }
2341
2342
2343 /****************************************************************************
2344 * send_iosp_ext_cmd
2345 * Is used to send a IOSP message to the Edgeport device
2346 ****************************************************************************/
2347 static int send_iosp_ext_cmd(struct edgeport_port *edge_port,
2348 __u8 command, __u8 param)
2349 {
2350 unsigned char *buffer;
2351 unsigned char *currentCommand;
2352 int length = 0;
2353 int status = 0;
2354
2355 dbg("%s - %d, %d", __func__, command, param);
2356
2357 buffer = kmalloc(10, GFP_ATOMIC);
2358 if (!buffer) {
2359 dev_err(&edge_port->port->dev,
2360 "%s - kmalloc(%d) failed.\n", __func__, 10);
2361 return -ENOMEM;
2362 }
2363
2364 currentCommand = buffer;
2365
2366 MAKE_CMD_EXT_CMD(&currentCommand, &length,
2367 edge_port->port->number - edge_port->port->serial->minor,
2368 command, param);
2369
2370 status = write_cmd_usb(edge_port, buffer, length);
2371 if (status) {
2372 /* something bad happened, let's free up the memory */
2373 kfree(buffer);
2374 }
2375
2376 return status;
2377 }
2378
2379
2380 /*****************************************************************************
2381 * write_cmd_usb
2382 * this function writes the given buffer out to the bulk write endpoint.
2383 *****************************************************************************/
2384 static int write_cmd_usb(struct edgeport_port *edge_port,
2385 unsigned char *buffer, int length)
2386 {
2387 struct edgeport_serial *edge_serial =
2388 usb_get_serial_data(edge_port->port->serial);
2389 int status = 0;
2390 struct urb *urb;
2391 int timeout;
2392
2393 usb_serial_debug_data(debug, &edge_port->port->dev,
2394 __func__, length, buffer);
2395
2396 /* Allocate our next urb */
2397 urb = usb_alloc_urb(0, GFP_ATOMIC);
2398 if (!urb)
2399 return -ENOMEM;
2400
2401 atomic_inc(&CmdUrbs);
2402 dbg("%s - ALLOCATE URB %p (outstanding %d)",
2403 __func__, urb, atomic_read(&CmdUrbs));
2404
2405 usb_fill_bulk_urb(urb, edge_serial->serial->dev,
2406 usb_sndbulkpipe(edge_serial->serial->dev,
2407 edge_serial->bulk_out_endpoint),
2408 buffer, length, edge_bulk_out_cmd_callback, edge_port);
2409
2410 edge_port->commandPending = true;
2411 status = usb_submit_urb(urb, GFP_ATOMIC);
2412
2413 if (status) {
2414 /* something went wrong */
2415 dev_err(&edge_port->port->dev,
2416 "%s - usb_submit_urb(write command) failed, status = %d\n",
2417 __func__, status);
2418 usb_kill_urb(urb);
2419 usb_free_urb(urb);
2420 atomic_dec(&CmdUrbs);
2421 return status;
2422 }
2423
2424 /* wait for command to finish */
2425 timeout = COMMAND_TIMEOUT;
2426 #if 0
2427 wait_event(&edge_port->wait_command, !edge_port->commandPending);
2428
2429 if (edge_port->commandPending) {
2430 /* command timed out */
2431 dbg("%s - command timed out", __func__);
2432 status = -EINVAL;
2433 }
2434 #endif
2435 return status;
2436 }
2437
2438
2439 /*****************************************************************************
2440 * send_cmd_write_baud_rate
2441 * this function sends the proper command to change the baud rate of the
2442 * specified port.
2443 *****************************************************************************/
2444 static int send_cmd_write_baud_rate(struct edgeport_port *edge_port,
2445 int baudRate)
2446 {
2447 struct edgeport_serial *edge_serial =
2448 usb_get_serial_data(edge_port->port->serial);
2449 unsigned char *cmdBuffer;
2450 unsigned char *currCmd;
2451 int cmdLen = 0;
2452 int divisor;
2453 int status;
2454 unsigned char number =
2455 edge_port->port->number - edge_port->port->serial->minor;
2456
2457 if (edge_serial->is_epic &&
2458 !edge_serial->epic_descriptor.Supports.IOSPSetBaudRate) {
2459 dbg("SendCmdWriteBaudRate - NOT Setting baud rate for port = %d, baud = %d",
2460 edge_port->port->number, baudRate);
2461 return 0;
2462 }
2463
2464 dbg("%s - port = %d, baud = %d", __func__,
2465 edge_port->port->number, baudRate);
2466
2467 status = calc_baud_rate_divisor(baudRate, &divisor);
2468 if (status) {
2469 dev_err(&edge_port->port->dev, "%s - bad baud rate\n",
2470 __func__);
2471 return status;
2472 }
2473
2474 /* Alloc memory for the string of commands. */
2475 cmdBuffer = kmalloc(0x100, GFP_ATOMIC);
2476 if (!cmdBuffer) {
2477 dev_err(&edge_port->port->dev,
2478 "%s - kmalloc(%d) failed.\n", __func__, 0x100);
2479 return -ENOMEM;
2480 }
2481 currCmd = cmdBuffer;
2482
2483 /* Enable access to divisor latch */
2484 MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, LCR, LCR_DL_ENABLE);
2485
2486 /* Write the divisor itself */
2487 MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, DLL, LOW8(divisor));
2488 MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, DLM, HIGH8(divisor));
2489
2490 /* Restore original value to disable access to divisor latch */
2491 MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, LCR,
2492 edge_port->shadowLCR);
2493
2494 status = write_cmd_usb(edge_port, cmdBuffer, cmdLen);
2495 if (status) {
2496 /* something bad happened, let's free up the memory */
2497 kfree(cmdBuffer);
2498 }
2499
2500 return status;
2501 }
2502
2503
2504 /*****************************************************************************
2505 * calc_baud_rate_divisor
2506 * this function calculates the proper baud rate divisor for the specified
2507 * baud rate.
2508 *****************************************************************************/
2509 static int calc_baud_rate_divisor(int baudrate, int *divisor)
2510 {
2511 int i;
2512 __u16 custom;
2513
2514
2515 dbg("%s - %d", __func__, baudrate);
2516
2517 for (i = 0; i < ARRAY_SIZE(divisor_table); i++) {
2518 if (divisor_table[i].BaudRate == baudrate) {
2519 *divisor = divisor_table[i].Divisor;
2520 return 0;
2521 }
2522 }
2523
2524 /* We have tried all of the standard baud rates
2525 * lets try to calculate the divisor for this baud rate
2526 * Make sure the baud rate is reasonable */
2527 if (baudrate > 50 && baudrate < 230400) {
2528 /* get divisor */
2529 custom = (__u16)((230400L + baudrate/2) / baudrate);
2530
2531 *divisor = custom;
2532
2533 dbg("%s - Baud %d = %d\n", __func__, baudrate, custom);
2534 return 0;
2535 }
2536
2537 return -1;
2538 }
2539
2540
2541 /*****************************************************************************
2542 * send_cmd_write_uart_register
2543 * this function builds up a uart register message and sends to the device.
2544 *****************************************************************************/
2545 static int send_cmd_write_uart_register(struct edgeport_port *edge_port,
2546 __u8 regNum, __u8 regValue)
2547 {
2548 struct edgeport_serial *edge_serial =
2549 usb_get_serial_data(edge_port->port->serial);
2550 unsigned char *cmdBuffer;
2551 unsigned char *currCmd;
2552 unsigned long cmdLen = 0;
2553 int status;
2554
2555 dbg("%s - write to %s register 0x%02x",
2556 (regNum == MCR) ? "MCR" : "LCR", __func__, regValue);
2557
2558 if (edge_serial->is_epic &&
2559 !edge_serial->epic_descriptor.Supports.IOSPWriteMCR &&
2560 regNum == MCR) {
2561 dbg("SendCmdWriteUartReg - Not writing to MCR Register");
2562 return 0;
2563 }
2564
2565 if (edge_serial->is_epic &&
2566 !edge_serial->epic_descriptor.Supports.IOSPWriteLCR &&
2567 regNum == LCR) {
2568 dbg("SendCmdWriteUartReg - Not writing to LCR Register");
2569 return 0;
2570 }
2571
2572 /* Alloc memory for the string of commands. */
2573 cmdBuffer = kmalloc(0x10, GFP_ATOMIC);
2574 if (cmdBuffer == NULL)
2575 return -ENOMEM;
2576
2577 currCmd = cmdBuffer;
2578
2579 /* Build a cmd in the buffer to write the given register */
2580 MAKE_CMD_WRITE_REG(&currCmd, &cmdLen,
2581 edge_port->port->number - edge_port->port->serial->minor,
2582 regNum, regValue);
2583
2584 status = write_cmd_usb(edge_port, cmdBuffer, cmdLen);
2585 if (status) {
2586 /* something bad happened, let's free up the memory */
2587 kfree(cmdBuffer);
2588 }
2589
2590 return status;
2591 }
2592
2593
2594 /*****************************************************************************
2595 * change_port_settings
2596 * This routine is called to set the UART on the device to match the
2597 * specified new settings.
2598 *****************************************************************************/
2599
2600 static void change_port_settings(struct tty_struct *tty,
2601 struct edgeport_port *edge_port, struct ktermios *old_termios)
2602 {
2603 struct edgeport_serial *edge_serial =
2604 usb_get_serial_data(edge_port->port->serial);
2605 int baud;
2606 unsigned cflag;
2607 __u8 mask = 0xff;
2608 __u8 lData;
2609 __u8 lParity;
2610 __u8 lStop;
2611 __u8 rxFlow;
2612 __u8 txFlow;
2613 int status;
2614
2615 dbg("%s - port %d", __func__, edge_port->port->number);
2616
2617 if (!edge_port->open &&
2618 !edge_port->openPending) {
2619 dbg("%s - port not opened", __func__);
2620 return;
2621 }
2622
2623 cflag = tty->termios->c_cflag;
2624
2625 switch (cflag & CSIZE) {
2626 case CS5:
2627 lData = LCR_BITS_5; mask = 0x1f;
2628 dbg("%s - data bits = 5", __func__);
2629 break;
2630 case CS6:
2631 lData = LCR_BITS_6; mask = 0x3f;
2632 dbg("%s - data bits = 6", __func__);
2633 break;
2634 case CS7:
2635 lData = LCR_BITS_7; mask = 0x7f;
2636 dbg("%s - data bits = 7", __func__);
2637 break;
2638 default:
2639 case CS8:
2640 lData = LCR_BITS_8;
2641 dbg("%s - data bits = 8", __func__);
2642 break;
2643 }
2644
2645 lParity = LCR_PAR_NONE;
2646 if (cflag & PARENB) {
2647 if (cflag & CMSPAR) {
2648 if (cflag & PARODD) {
2649 lParity = LCR_PAR_MARK;
2650 dbg("%s - parity = mark", __func__);
2651 } else {
2652 lParity = LCR_PAR_SPACE;
2653 dbg("%s - parity = space", __func__);
2654 }
2655 } else if (cflag & PARODD) {
2656 lParity = LCR_PAR_ODD;
2657 dbg("%s - parity = odd", __func__);
2658 } else {
2659 lParity = LCR_PAR_EVEN;
2660 dbg("%s - parity = even", __func__);
2661 }
2662 } else {
2663 dbg("%s - parity = none", __func__);
2664 }
2665
2666 if (cflag & CSTOPB) {
2667 lStop = LCR_STOP_2;
2668 dbg("%s - stop bits = 2", __func__);
2669 } else {
2670 lStop = LCR_STOP_1;
2671 dbg("%s - stop bits = 1", __func__);
2672 }
2673
2674 /* figure out the flow control settings */
2675 rxFlow = txFlow = 0x00;
2676 if (cflag & CRTSCTS) {
2677 rxFlow |= IOSP_RX_FLOW_RTS;
2678 txFlow |= IOSP_TX_FLOW_CTS;
2679 dbg("%s - RTS/CTS is enabled", __func__);
2680 } else {
2681 dbg("%s - RTS/CTS is disabled", __func__);
2682 }
2683
2684 /* if we are implementing XON/XOFF, set the start and stop character
2685 in the device */
2686 if (I_IXOFF(tty) || I_IXON(tty)) {
2687 unsigned char stop_char = STOP_CHAR(tty);
2688 unsigned char start_char = START_CHAR(tty);
2689
2690 if ((!edge_serial->is_epic) ||
2691 ((edge_serial->is_epic) &&
2692 (edge_serial->epic_descriptor.Supports.IOSPSetXChar))) {
2693 send_iosp_ext_cmd(edge_port,
2694 IOSP_CMD_SET_XON_CHAR, start_char);
2695 send_iosp_ext_cmd(edge_port,
2696 IOSP_CMD_SET_XOFF_CHAR, stop_char);
2697 }
2698
2699 /* if we are implementing INBOUND XON/XOFF */
2700 if (I_IXOFF(tty)) {
2701 rxFlow |= IOSP_RX_FLOW_XON_XOFF;
2702 dbg("%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x",
2703 __func__, start_char, stop_char);
2704 } else {
2705 dbg("%s - INBOUND XON/XOFF is disabled", __func__);
2706 }
2707
2708 /* if we are implementing OUTBOUND XON/XOFF */
2709 if (I_IXON(tty)) {
2710 txFlow |= IOSP_TX_FLOW_XON_XOFF;
2711 dbg("%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x",
2712 __func__, start_char, stop_char);
2713 } else {
2714 dbg("%s - OUTBOUND XON/XOFF is disabled", __func__);
2715 }
2716 }
2717
2718 /* Set flow control to the configured value */
2719 if ((!edge_serial->is_epic) ||
2720 ((edge_serial->is_epic) &&
2721 (edge_serial->epic_descriptor.Supports.IOSPSetRxFlow)))
2722 send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_RX_FLOW, rxFlow);
2723 if ((!edge_serial->is_epic) ||
2724 ((edge_serial->is_epic) &&
2725 (edge_serial->epic_descriptor.Supports.IOSPSetTxFlow)))
2726 send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_TX_FLOW, txFlow);
2727
2728
2729 edge_port->shadowLCR &= ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK);
2730 edge_port->shadowLCR |= (lData | lParity | lStop);
2731
2732 edge_port->validDataMask = mask;
2733
2734 /* Send the updated LCR value to the EdgePort */
2735 status = send_cmd_write_uart_register(edge_port, LCR,
2736 edge_port->shadowLCR);
2737 if (status != 0)
2738 return;
2739
2740 /* set up the MCR register and send it to the EdgePort */
2741 edge_port->shadowMCR = MCR_MASTER_IE;
2742 if (cflag & CBAUD)
2743 edge_port->shadowMCR |= (MCR_DTR | MCR_RTS);
2744
2745 status = send_cmd_write_uart_register(edge_port, MCR,
2746 edge_port->shadowMCR);
2747 if (status != 0)
2748 return;
2749
2750 /* Determine divisor based on baud rate */
2751 baud = tty_get_baud_rate(tty);
2752 if (!baud) {
2753 /* pick a default, any default... */
2754 baud = 9600;
2755 }
2756
2757 dbg("%s - baud rate = %d", __func__, baud);
2758 status = send_cmd_write_baud_rate(edge_port, baud);
2759 if (status == -1) {
2760 /* Speed change was not possible - put back the old speed */
2761 baud = tty_termios_baud_rate(old_termios);
2762 tty_encode_baud_rate(tty, baud, baud);
2763 }
2764 return;
2765 }
2766
2767
2768 /****************************************************************************
2769 * unicode_to_ascii
2770 * Turns a string from Unicode into ASCII.
2771 * Doesn't do a good job with any characters that are outside the normal
2772 * ASCII range, but it's only for debugging...
2773 * NOTE: expects the unicode in LE format
2774 ****************************************************************************/
2775 static void unicode_to_ascii(char *string, int buflen,
2776 __le16 *unicode, int unicode_size)
2777 {
2778 int i;
2779
2780 if (buflen <= 0) /* never happens, but... */
2781 return;
2782 --buflen; /* space for nul */
2783
2784 for (i = 0; i < unicode_size; i++) {
2785 if (i >= buflen)
2786 break;
2787 string[i] = (char)(le16_to_cpu(unicode[i]));
2788 }
2789 string[i] = 0x00;
2790 }
2791
2792
2793 /****************************************************************************
2794 * get_manufacturing_desc
2795 * reads in the manufacturing descriptor and stores it into the serial
2796 * structure.
2797 ****************************************************************************/
2798 static void get_manufacturing_desc(struct edgeport_serial *edge_serial)
2799 {
2800 int response;
2801
2802 dbg("getting manufacturer descriptor");
2803
2804 response = rom_read(edge_serial->serial,
2805 (EDGE_MANUF_DESC_ADDR & 0xffff0000) >> 16,
2806 (__u16)(EDGE_MANUF_DESC_ADDR & 0x0000ffff),
2807 EDGE_MANUF_DESC_LEN,
2808 (__u8 *)(&edge_serial->manuf_descriptor));
2809
2810 if (response < 1)
2811 dev_err(&edge_serial->serial->dev->dev,
2812 "error in getting manufacturer descriptor\n");
2813 else {
2814 char string[30];
2815 dbg("**Manufacturer Descriptor");
2816 dbg(" RomSize: %dK",
2817 edge_serial->manuf_descriptor.RomSize);
2818 dbg(" RamSize: %dK",
2819 edge_serial->manuf_descriptor.RamSize);
2820 dbg(" CpuRev: %d",
2821 edge_serial->manuf_descriptor.CpuRev);
2822 dbg(" BoardRev: %d",
2823 edge_serial->manuf_descriptor.BoardRev);
2824 dbg(" NumPorts: %d",
2825 edge_serial->manuf_descriptor.NumPorts);
2826 dbg(" DescDate: %d/%d/%d",
2827 edge_serial->manuf_descriptor.DescDate[0],
2828 edge_serial->manuf_descriptor.DescDate[1],
2829 edge_serial->manuf_descriptor.DescDate[2]+1900);
2830 unicode_to_ascii(string, sizeof(string),
2831 edge_serial->manuf_descriptor.SerialNumber,
2832 edge_serial->manuf_descriptor.SerNumLength/2);
2833 dbg(" SerialNumber: %s", string);
2834 unicode_to_ascii(string, sizeof(string),
2835 edge_serial->manuf_descriptor.AssemblyNumber,
2836 edge_serial->manuf_descriptor.AssemblyNumLength/2);
2837 dbg(" AssemblyNumber: %s", string);
2838 unicode_to_ascii(string, sizeof(string),
2839 edge_serial->manuf_descriptor.OemAssyNumber,
2840 edge_serial->manuf_descriptor.OemAssyNumLength/2);
2841 dbg(" OemAssyNumber: %s", string);
2842 dbg(" UartType: %d",
2843 edge_serial->manuf_descriptor.UartType);
2844 dbg(" IonPid: %d",
2845 edge_serial->manuf_descriptor.IonPid);
2846 dbg(" IonConfig: %d",
2847 edge_serial->manuf_descriptor.IonConfig);
2848 }
2849 }
2850
2851
2852 /****************************************************************************
2853 * get_boot_desc
2854 * reads in the bootloader descriptor and stores it into the serial
2855 * structure.
2856 ****************************************************************************/
2857 static void get_boot_desc(struct edgeport_serial *edge_serial)
2858 {
2859 int response;
2860
2861 dbg("getting boot descriptor");
2862
2863 response = rom_read(edge_serial->serial,
2864 (EDGE_BOOT_DESC_ADDR & 0xffff0000) >> 16,
2865 (__u16)(EDGE_BOOT_DESC_ADDR & 0x0000ffff),
2866 EDGE_BOOT_DESC_LEN,
2867 (__u8 *)(&edge_serial->boot_descriptor));
2868
2869 if (response < 1)
2870 dev_err(&edge_serial->serial->dev->dev,
2871 "error in getting boot descriptor\n");
2872 else {
2873 dbg("**Boot Descriptor:");
2874 dbg(" BootCodeLength: %d",
2875 le16_to_cpu(edge_serial->boot_descriptor.BootCodeLength));
2876 dbg(" MajorVersion: %d",
2877 edge_serial->boot_descriptor.MajorVersion);
2878 dbg(" MinorVersion: %d",
2879 edge_serial->boot_descriptor.MinorVersion);
2880 dbg(" BuildNumber: %d",
2881 le16_to_cpu(edge_serial->boot_descriptor.BuildNumber));
2882 dbg(" Capabilities: 0x%x",
2883 le16_to_cpu(edge_serial->boot_descriptor.Capabilities));
2884 dbg(" UConfig0: %d",
2885 edge_serial->boot_descriptor.UConfig0);
2886 dbg(" UConfig1: %d",
2887 edge_serial->boot_descriptor.UConfig1);
2888 }
2889 }
2890
2891
2892 /****************************************************************************
2893 * load_application_firmware
2894 * This is called to load the application firmware to the device
2895 ****************************************************************************/
2896 static void load_application_firmware(struct edgeport_serial *edge_serial)
2897 {
2898 const struct ihex_binrec *rec;
2899 const struct firmware *fw;
2900 const char *fw_name;
2901 const char *fw_info;
2902 int response;
2903 __u32 Operaddr;
2904 __u16 build;
2905
2906 switch (edge_serial->product_info.iDownloadFile) {
2907 case EDGE_DOWNLOAD_FILE_I930:
2908 fw_info = "downloading firmware version (930)";
2909 fw_name = "edgeport/down.fw";
2910 break;
2911
2912 case EDGE_DOWNLOAD_FILE_80251:
2913 fw_info = "downloading firmware version (80251)";
2914 fw_name = "edgeport/down2.fw";
2915 break;
2916
2917 case EDGE_DOWNLOAD_FILE_NONE:
2918 dbg ("No download file specified, skipping download\n");
2919 return;
2920
2921 default:
2922 return;
2923 }
2924
2925 response = request_ihex_firmware(&fw, fw_name,
2926 &edge_serial->serial->dev->dev);
2927 if (response) {
2928 printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
2929 fw_name, response);
2930 return;
2931 }
2932
2933 rec = (const struct ihex_binrec *)fw->data;
2934 build = (rec->data[2] << 8) | rec->data[3];
2935
2936 dbg("%s %d.%d.%d", fw_info, rec->data[0], rec->data[1], build);
2937
2938 edge_serial->product_info.FirmwareMajorVersion = fw->data[0];
2939 edge_serial->product_info.FirmwareMinorVersion = fw->data[1];
2940 edge_serial->product_info.FirmwareBuildNumber = cpu_to_le16(build);
2941
2942 for (rec = ihex_next_binrec(rec); rec;
2943 rec = ihex_next_binrec(rec)) {
2944 Operaddr = be32_to_cpu(rec->addr);
2945 response = sram_write(edge_serial->serial,
2946 Operaddr >> 16,
2947 Operaddr & 0xFFFF,
2948 be16_to_cpu(rec->len),
2949 &rec->data[0]);
2950 if (response < 0) {
2951 dev_err(&edge_serial->serial->dev->dev,
2952 "sram_write failed (%x, %x, %d)\n",
2953 Operaddr >> 16, Operaddr & 0xFFFF,
2954 be16_to_cpu(rec->len));
2955 break;
2956 }
2957 }
2958
2959 dbg("sending exec_dl_code");
2960 response = usb_control_msg (edge_serial->serial->dev,
2961 usb_sndctrlpipe(edge_serial->serial->dev, 0),
2962 USB_REQUEST_ION_EXEC_DL_CODE,
2963 0x40, 0x4000, 0x0001, NULL, 0, 3000);
2964
2965 release_firmware(fw);
2966 return;
2967 }
2968
2969
2970 /****************************************************************************
2971 * edge_startup
2972 ****************************************************************************/
2973 static int edge_startup(struct usb_serial *serial)
2974 {
2975 struct edgeport_serial *edge_serial;
2976 struct edgeport_port *edge_port;
2977 struct usb_device *dev;
2978 int i, j;
2979 int response;
2980 bool interrupt_in_found;
2981 bool bulk_in_found;
2982 bool bulk_out_found;
2983 static __u32 descriptor[3] = { EDGE_COMPATIBILITY_MASK0,
2984 EDGE_COMPATIBILITY_MASK1,
2985 EDGE_COMPATIBILITY_MASK2 };
2986
2987 dev = serial->dev;
2988
2989 /* create our private serial structure */
2990 edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL);
2991 if (edge_serial == NULL) {
2992 dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
2993 return -ENOMEM;
2994 }
2995 spin_lock_init(&edge_serial->es_lock);
2996 edge_serial->serial = serial;
2997 usb_set_serial_data(serial, edge_serial);
2998
2999 /* get the name for the device from the device */
3000 i = get_string(dev, dev->descriptor.iManufacturer,
3001 &edge_serial->name[0], MAX_NAME_LEN+1);
3002 edge_serial->name[i++] = ' ';
3003 get_string(dev, dev->descriptor.iProduct,
3004 &edge_serial->name[i], MAX_NAME_LEN+2 - i);
3005
3006 dev_info(&serial->dev->dev, "%s detected\n", edge_serial->name);
3007
3008 /* Read the epic descriptor */
3009 if (get_epic_descriptor(edge_serial) <= 0) {
3010 /* memcpy descriptor to Supports structures */
3011 memcpy(&edge_serial->epic_descriptor.Supports, descriptor,
3012 sizeof(struct edge_compatibility_bits));
3013
3014 /* get the manufacturing descriptor for this device */
3015 get_manufacturing_desc(edge_serial);
3016
3017 /* get the boot descriptor */
3018 get_boot_desc(edge_serial);
3019
3020 get_product_info(edge_serial);
3021 }
3022
3023 /* set the number of ports from the manufacturing description */
3024 /* serial->num_ports = serial->product_info.NumPorts; */
3025 if ((!edge_serial->is_epic) &&
3026 (edge_serial->product_info.NumPorts != serial->num_ports)) {
3027 dev_warn(&serial->dev->dev, "Device Reported %d serial ports "
3028 "vs. core thinking we have %d ports, email "
3029 "greg@kroah.com this information.\n",
3030 edge_serial->product_info.NumPorts,
3031 serial->num_ports);
3032 }
3033
3034 dbg("%s - time 1 %ld", __func__, jiffies);
3035
3036 /* If not an EPiC device */
3037 if (!edge_serial->is_epic) {
3038 /* now load the application firmware into this device */
3039 load_application_firmware(edge_serial);
3040
3041 dbg("%s - time 2 %ld", __func__, jiffies);
3042
3043 /* Check current Edgeport EEPROM and update if necessary */
3044 update_edgeport_E2PROM(edge_serial);
3045
3046 dbg("%s - time 3 %ld", __func__, jiffies);
3047
3048 /* set the configuration to use #1 */
3049 /* dbg("set_configuration 1"); */
3050 /* usb_set_configuration (dev, 1); */
3051 }
3052 dbg(" FirmwareMajorVersion %d.%d.%d",
3053 edge_serial->product_info.FirmwareMajorVersion,
3054 edge_serial->product_info.FirmwareMinorVersion,
3055 le16_to_cpu(edge_serial->product_info.FirmwareBuildNumber));
3056
3057 /* we set up the pointers to the endpoints in the edge_open function,
3058 * as the structures aren't created yet. */
3059
3060 /* set up our port private structures */
3061 for (i = 0; i < serial->num_ports; ++i) {
3062 edge_port = kmalloc(sizeof(struct edgeport_port), GFP_KERNEL);
3063 if (edge_port == NULL) {
3064 dev_err(&serial->dev->dev, "%s - Out of memory\n",
3065 __func__);
3066 for (j = 0; j < i; ++j) {
3067 kfree(usb_get_serial_port_data(serial->port[j]));
3068 usb_set_serial_port_data(serial->port[j],
3069 NULL);
3070 }
3071 usb_set_serial_data(serial, NULL);
3072 kfree(edge_serial);
3073 return -ENOMEM;
3074 }
3075 memset(edge_port, 0, sizeof(struct edgeport_port));
3076 spin_lock_init(&edge_port->ep_lock);
3077 edge_port->port = serial->port[i];
3078 usb_set_serial_port_data(serial->port[i], edge_port);
3079 }
3080
3081 response = 0;
3082
3083 if (edge_serial->is_epic) {
3084 /* EPIC thing, set up our interrupt polling now and our read
3085 * urb, so that the device knows it really is connected. */
3086 interrupt_in_found = bulk_in_found = bulk_out_found = false;
3087 for (i = 0; i < serial->interface->altsetting[0]
3088 .desc.bNumEndpoints; ++i) {
3089 struct usb_endpoint_descriptor *endpoint;
3090 int buffer_size;
3091
3092 endpoint = &serial->interface->altsetting[0].
3093 endpoint[i].desc;
3094 buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
3095 if (!interrupt_in_found &&
3096 (usb_endpoint_is_int_in(endpoint))) {
3097 /* we found a interrupt in endpoint */
3098 dbg("found interrupt in");
3099
3100 /* not set up yet, so do it now */
3101 edge_serial->interrupt_read_urb =
3102 usb_alloc_urb(0, GFP_KERNEL);
3103 if (!edge_serial->interrupt_read_urb) {
3104 dev_err(&dev->dev, "out of memory\n");
3105 return -ENOMEM;
3106 }
3107 edge_serial->interrupt_in_buffer =
3108 kmalloc(buffer_size, GFP_KERNEL);
3109 if (!edge_serial->interrupt_in_buffer) {
3110 dev_err(&dev->dev, "out of memory\n");
3111 usb_free_urb(edge_serial->interrupt_read_urb);
3112 return -ENOMEM;
3113 }
3114 edge_serial->interrupt_in_endpoint =
3115 endpoint->bEndpointAddress;
3116
3117 /* set up our interrupt urb */
3118 usb_fill_int_urb(
3119 edge_serial->interrupt_read_urb,
3120 dev,
3121 usb_rcvintpipe(dev,
3122 endpoint->bEndpointAddress),
3123 edge_serial->interrupt_in_buffer,
3124 buffer_size,
3125 edge_interrupt_callback,
3126 edge_serial,
3127 endpoint->bInterval);
3128
3129 interrupt_in_found = true;
3130 }
3131
3132 if (!bulk_in_found &&
3133 (usb_endpoint_is_bulk_in(endpoint))) {
3134 /* we found a bulk in endpoint */
3135 dbg("found bulk in");
3136
3137 /* not set up yet, so do it now */
3138 edge_serial->read_urb =
3139 usb_alloc_urb(0, GFP_KERNEL);
3140 if (!edge_serial->read_urb) {
3141 dev_err(&dev->dev, "out of memory\n");
3142 return -ENOMEM;
3143 }
3144 edge_serial->bulk_in_buffer =
3145 kmalloc(buffer_size, GFP_KERNEL);
3146 if (!edge_serial->bulk_in_buffer) {
3147 dev_err(&dev->dev, "out of memory\n");
3148 usb_free_urb(edge_serial->read_urb);
3149 return -ENOMEM;
3150 }
3151 edge_serial->bulk_in_endpoint =
3152 endpoint->bEndpointAddress;
3153
3154 /* set up our bulk in urb */
3155 usb_fill_bulk_urb(edge_serial->read_urb, dev,
3156 usb_rcvbulkpipe(dev,
3157 endpoint->bEndpointAddress),
3158 edge_serial->bulk_in_buffer,
3159 le16_to_cpu(endpoint->wMaxPacketSize),
3160 edge_bulk_in_callback,
3161 edge_serial);
3162 bulk_in_found = true;
3163 }
3164
3165 if (!bulk_out_found &&
3166 (usb_endpoint_is_bulk_out(endpoint))) {
3167 /* we found a bulk out endpoint */
3168 dbg("found bulk out");
3169 edge_serial->bulk_out_endpoint =
3170 endpoint->bEndpointAddress;
3171 bulk_out_found = true;
3172 }
3173 }
3174
3175 if (!interrupt_in_found || !bulk_in_found || !bulk_out_found) {
3176 dev_err(&dev->dev, "Error - the proper endpoints "
3177 "were not found!\n");
3178 return -ENODEV;
3179 }
3180
3181 /* start interrupt read for this edgeport this interrupt will
3182 * continue as long as the edgeport is connected */
3183 response = usb_submit_urb(edge_serial->interrupt_read_urb,
3184 GFP_KERNEL);
3185 if (response)
3186 dev_err(&dev->dev,
3187 "%s - Error %d submitting control urb\n",
3188 __func__, response);
3189 }
3190 return response;
3191 }
3192
3193
3194 /****************************************************************************
3195 * edge_disconnect
3196 * This function is called whenever the device is removed from the usb bus.
3197 ****************************************************************************/
3198 static void edge_disconnect(struct usb_serial *serial)
3199 {
3200 struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
3201
3202 dbg("%s", __func__);
3203
3204 /* stop reads and writes on all ports */
3205 /* free up our endpoint stuff */
3206 if (edge_serial->is_epic) {
3207 usb_kill_urb(edge_serial->interrupt_read_urb);
3208 usb_free_urb(edge_serial->interrupt_read_urb);
3209 kfree(edge_serial->interrupt_in_buffer);
3210
3211 usb_kill_urb(edge_serial->read_urb);
3212 usb_free_urb(edge_serial->read_urb);
3213 kfree(edge_serial->bulk_in_buffer);
3214 }
3215 }
3216
3217
3218 /****************************************************************************
3219 * edge_release
3220 * This function is called when the device structure is deallocated.
3221 ****************************************************************************/
3222 static void edge_release(struct usb_serial *serial)
3223 {
3224 struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
3225 int i;
3226
3227 dbg("%s", __func__);
3228
3229 for (i = 0; i < serial->num_ports; ++i)
3230 kfree(usb_get_serial_port_data(serial->port[i]));
3231
3232 kfree(edge_serial);
3233 }
3234
3235
3236 /****************************************************************************
3237 * edgeport_init
3238 * This is called by the module subsystem, or on startup to initialize us
3239 ****************************************************************************/
3240 static int __init edgeport_init(void)
3241 {
3242 int retval;
3243
3244 retval = usb_serial_register(&edgeport_2port_device);
3245 if (retval)
3246 goto failed_2port_device_register;
3247 retval = usb_serial_register(&edgeport_4port_device);
3248 if (retval)
3249 goto failed_4port_device_register;
3250 retval = usb_serial_register(&edgeport_8port_device);
3251 if (retval)
3252 goto failed_8port_device_register;
3253 retval = usb_serial_register(&epic_device);
3254 if (retval)
3255 goto failed_epic_device_register;
3256 retval = usb_register(&io_driver);
3257 if (retval)
3258 goto failed_usb_register;
3259 atomic_set(&CmdUrbs, 0);
3260 printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
3261 DRIVER_DESC "\n");
3262 return 0;
3263
3264 failed_usb_register:
3265 usb_serial_deregister(&epic_device);
3266 failed_epic_device_register:
3267 usb_serial_deregister(&edgeport_8port_device);
3268 failed_8port_device_register:
3269 usb_serial_deregister(&edgeport_4port_device);
3270 failed_4port_device_register:
3271 usb_serial_deregister(&edgeport_2port_device);
3272 failed_2port_device_register:
3273 return retval;
3274 }
3275
3276
3277 /****************************************************************************
3278 * edgeport_exit
3279 * Called when the driver is about to be unloaded.
3280 ****************************************************************************/
3281 static void __exit edgeport_exit (void)
3282 {
3283 usb_deregister(&io_driver);
3284 usb_serial_deregister(&edgeport_2port_device);
3285 usb_serial_deregister(&edgeport_4port_device);
3286 usb_serial_deregister(&edgeport_8port_device);
3287 usb_serial_deregister(&epic_device);
3288 }
3289
3290 module_init(edgeport_init);
3291 module_exit(edgeport_exit);
3292
3293 /* Module information */
3294 MODULE_AUTHOR(DRIVER_AUTHOR);
3295 MODULE_DESCRIPTION(DRIVER_DESC);
3296 MODULE_LICENSE("GPL");
3297 MODULE_FIRMWARE("edgeport/boot.fw");
3298 MODULE_FIRMWARE("edgeport/boot2.fw");
3299 MODULE_FIRMWARE("edgeport/down.fw");
3300 MODULE_FIRMWARE("edgeport/down2.fw");
3301
3302 module_param(debug, bool, S_IRUGO | S_IWUSR);
3303 MODULE_PARM_DESC(debug, "Debug enabled or not");
Linux for Ginger Game Console