OMAP3 SRF: MPU/CORE/PD latency modeling
[linux-ginger.git] / fs / Makefile
blobaf6d04700d9c1ff74ff855521d282d6c72fa2bf2
2 # Makefile for the Linux filesystems.
4 # 14 Sep 2000, Christoph Hellwig <hch@infradead.org>
5 # Rewritten to use lists instead of if-statements.
6 #
8 obj-y := open.o read_write.o file_table.o super.o \
9 char_dev.o stat.o exec.o pipe.o namei.o fcntl.o \
10 ioctl.o readdir.o select.o fifo.o dcache.o inode.o \
11 attr.o bad_inode.o file.o filesystems.o namespace.o \
12 seq_file.o xattr.o libfs.o fs-writeback.o \
13 pnode.o drop_caches.o splice.o sync.o utimes.o \
14 stack.o fs_struct.o
16 ifeq ($(CONFIG_BLOCK),y)
17 obj-y += buffer.o bio.o block_dev.o direct-io.o mpage.o ioprio.o
18 else
19 obj-y += no-block.o
20 endif
22 obj-$(CONFIG_BLK_DEV_INTEGRITY) += bio-integrity.o
23 obj-y += notify/
24 obj-$(CONFIG_EPOLL) += eventpoll.o
25 obj-$(CONFIG_ANON_INODES) += anon_inodes.o
26 obj-$(CONFIG_SIGNALFD) += signalfd.o
27 obj-$(CONFIG_TIMERFD) += timerfd.o
28 obj-$(CONFIG_EVENTFD) += eventfd.o
29 obj-$(CONFIG_AIO) += aio.o
30 obj-$(CONFIG_FILE_LOCKING) += locks.o
31 obj-$(CONFIG_COMPAT) += compat.o compat_ioctl.o
33 nfsd-$(CONFIG_NFSD) := nfsctl.o
34 obj-y += $(nfsd-y) $(nfsd-m)
36 obj-$(CONFIG_BINFMT_AOUT) += binfmt_aout.o
37 obj-$(CONFIG_BINFMT_EM86) += binfmt_em86.o
38 obj-$(CONFIG_BINFMT_MISC) += binfmt_misc.o
40 # binfmt_script is always there
41 obj-y += binfmt_script.o
43 obj-$(CONFIG_BINFMT_ELF) += binfmt_elf.o
44 obj-$(CONFIG_COMPAT_BINFMT_ELF) += compat_binfmt_elf.o
45 obj-$(CONFIG_BINFMT_ELF_FDPIC) += binfmt_elf_fdpic.o
46 obj-$(CONFIG_BINFMT_SOM) += binfmt_som.o
47 obj-$(CONFIG_BINFMT_FLAT) += binfmt_flat.o
49 obj-$(CONFIG_FS_MBCACHE) += mbcache.o
50 obj-$(CONFIG_FS_POSIX_ACL) += posix_acl.o xattr_acl.o
51 obj-$(CONFIG_NFS_COMMON) += nfs_common/
52 obj-$(CONFIG_GENERIC_ACL) += generic_acl.o
54 obj-y += quota/
56 obj-$(CONFIG_PROC_FS) += proc/
57 obj-y += partitions/
58 obj-$(CONFIG_SYSFS) += sysfs/
59 obj-$(CONFIG_CONFIGFS_FS) += configfs/
60 obj-y += devpts/
62 obj-$(CONFIG_PROFILING) += dcookies.o
63 obj-$(CONFIG_DLM) += dlm/
65 # Do not add any filesystems before this line
66 obj-$(CONFIG_FSCACHE) += fscache/
67 obj-$(CONFIG_REISERFS_FS) += reiserfs/
68 obj-$(CONFIG_EXT3_FS) += ext3/ # Before ext2 so root fs can be ext3
69 obj-$(CONFIG_EXT2_FS) += ext2/
70 # We place ext4 after ext2 so plain ext2 root fs's are mounted using ext2
71 # unless explicitly requested by rootfstype
72 obj-$(CONFIG_EXT4_FS) += ext4/
73 obj-$(CONFIG_JBD) += jbd/
74 obj-$(CONFIG_JBD2) += jbd2/
75 obj-$(CONFIG_CRAMFS) += cramfs/
76 obj-$(CONFIG_SQUASHFS) += squashfs/
77 obj-y += ramfs/
78 obj-$(CONFIG_HUGETLBFS) += hugetlbfs/
79 obj-$(CONFIG_CODA_FS) += coda/
80 obj-$(CONFIG_MINIX_FS) += minix/
81 obj-$(CONFIG_FAT_FS) += fat/
82 obj-$(CONFIG_BFS_FS) += bfs/
83 obj-$(CONFIG_ISO9660_FS) += isofs/
84 obj-$(CONFIG_HFSPLUS_FS) += hfsplus/ # Before hfs to find wrapped HFS+
85 obj-$(CONFIG_HFS_FS) += hfs/
86 obj-$(CONFIG_ECRYPT_FS) += ecryptfs/
87 obj-$(CONFIG_VXFS_FS) += freevxfs/
88 obj-$(CONFIG_NFS_FS) += nfs/
89 obj-$(CONFIG_EXPORTFS) += exportfs/
90 obj-$(CONFIG_NFSD) += nfsd/
91 obj-$(CONFIG_LOCKD) += lockd/
92 obj-$(CONFIG_NLS) += nls/
93 obj-$(CONFIG_SYSV_FS) += sysv/
94 obj-$(CONFIG_SMB_FS) += smbfs/
95 obj-$(CONFIG_CIFS) += cifs/
96 obj-$(CONFIG_NCP_FS) += ncpfs/
97 obj-$(CONFIG_HPFS_FS) += hpfs/
98 obj-$(CONFIG_NTFS_FS) += ntfs/
99 obj-$(CONFIG_UFS_FS) += ufs/
100 obj-$(CONFIG_EFS_FS) += efs/
101 obj-$(CONFIG_JFFS2_FS) += jffs2/
102 obj-$(CONFIG_UBIFS_FS) += ubifs/
103 obj-$(CONFIG_AFFS_FS) += affs/
104 obj-$(CONFIG_ROMFS_FS) += romfs/
105 obj-$(CONFIG_QNX4FS_FS) += qnx4/
106 obj-$(CONFIG_AUTOFS_FS) += autofs/
107 obj-$(CONFIG_AUTOFS4_FS) += autofs4/
108 obj-$(CONFIG_ADFS_FS) += adfs/
109 obj-$(CONFIG_FUSE_FS) += fuse/
110 obj-$(CONFIG_UDF_FS) += udf/
111 obj-$(CONFIG_SUN_OPENPROMFS) += openpromfs/
112 obj-$(CONFIG_OMFS_FS) += omfs/
113 obj-$(CONFIG_JFS_FS) += jfs/
114 obj-$(CONFIG_XFS_FS) += xfs/
115 obj-$(CONFIG_9P_FS) += 9p/
116 obj-$(CONFIG_AFS_FS) += afs/
117 obj-$(CONFIG_NILFS2_FS) += nilfs2/
118 obj-$(CONFIG_BEFS_FS) += befs/
119 obj-$(CONFIG_HOSTFS) += hostfs/
120 obj-$(CONFIG_HPPFS) += hppfs/
121 obj-$(CONFIG_CACHEFILES) += cachefiles/
122 obj-$(CONFIG_DEBUG_FS) += debugfs/
123 obj-$(CONFIG_OCFS2_FS) += ocfs2/
124 obj-$(CONFIG_BTRFS_FS) += btrfs/
125 obj-$(CONFIG_GFS2_FS) += gfs2/
126 obj-$(CONFIG_EXOFS_FS) += exofs/