I2C: TWL4030: Kconfig and Makefile changes
[linux-ginger.git] / arch / arm / mach-s3c2440 / mach-osiris.c
blob78af7664988b98746f1499a79dd142a0fb33b5fd
1 /* linux/arch/arm/mach-s3c2440/mach-osiris.c
3 * Copyright (c) 2005 Simtec Electronics
4 * http://armlinux.simtec.co.uk/
5 * Ben Dooks <ben@simtec.co.uk>
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
12 #include <linux/kernel.h>
13 #include <linux/types.h>
14 #include <linux/interrupt.h>
15 #include <linux/list.h>
16 #include <linux/timer.h>
17 #include <linux/init.h>
18 #include <linux/device.h>
19 #include <linux/sysdev.h>
20 #include <linux/serial_core.h>
22 #include <asm/mach/arch.h>
23 #include <asm/mach/map.h>
24 #include <asm/mach/irq.h>
26 #include <asm/arch/osiris-map.h>
27 #include <asm/arch/osiris-cpld.h>
29 #include <asm/hardware.h>
30 #include <asm/io.h>
31 #include <asm/irq.h>
32 #include <asm/mach-types.h>
34 #include <asm/plat-s3c/regs-serial.h>
35 #include <asm/arch/regs-gpio.h>
36 #include <asm/arch/regs-mem.h>
37 #include <asm/arch/regs-lcd.h>
38 #include <asm/plat-s3c/nand.h>
40 #include <linux/mtd/mtd.h>
41 #include <linux/mtd/nand.h>
42 #include <linux/mtd/nand_ecc.h>
43 #include <linux/mtd/partitions.h>
45 #include <asm/plat-s3c24xx/clock.h>
46 #include <asm/plat-s3c24xx/devs.h>
47 #include <asm/plat-s3c24xx/cpu.h>
49 /* onboard perihperal map */
51 static struct map_desc osiris_iodesc[] __initdata = {
52 /* ISA IO areas (may be over-written later) */
55 .virtual = (u32)S3C24XX_VA_ISA_BYTE,
56 .pfn = __phys_to_pfn(S3C2410_CS5),
57 .length = SZ_16M,
58 .type = MT_DEVICE,
59 }, {
60 .virtual = (u32)S3C24XX_VA_ISA_WORD,
61 .pfn = __phys_to_pfn(S3C2410_CS5),
62 .length = SZ_16M,
63 .type = MT_DEVICE,
66 /* CPLD control registers */
69 .virtual = (u32)OSIRIS_VA_CTRL0,
70 .pfn = __phys_to_pfn(OSIRIS_PA_CTRL0),
71 .length = SZ_16K,
72 .type = MT_DEVICE,
73 }, {
74 .virtual = (u32)OSIRIS_VA_CTRL1,
75 .pfn = __phys_to_pfn(OSIRIS_PA_CTRL1),
76 .length = SZ_16K,
77 .type = MT_DEVICE,
78 }, {
79 .virtual = (u32)OSIRIS_VA_CTRL2,
80 .pfn = __phys_to_pfn(OSIRIS_PA_CTRL2),
81 .length = SZ_16K,
82 .type = MT_DEVICE,
83 }, {
84 .virtual = (u32)OSIRIS_VA_IDREG,
85 .pfn = __phys_to_pfn(OSIRIS_PA_IDREG),
86 .length = SZ_16K,
87 .type = MT_DEVICE,
91 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
92 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
93 #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
95 static struct s3c24xx_uart_clksrc osiris_serial_clocks[] = {
96 [0] = {
97 .name = "uclk",
98 .divisor = 1,
99 .min_baud = 0,
100 .max_baud = 0,
102 [1] = {
103 .name = "pclk",
104 .divisor = 1,
105 .min_baud = 0,
106 .max_baud = 0,
110 static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = {
111 [0] = {
112 .hwport = 0,
113 .flags = 0,
114 .ucon = UCON,
115 .ulcon = ULCON,
116 .ufcon = UFCON,
117 .clocks = osiris_serial_clocks,
118 .clocks_size = ARRAY_SIZE(osiris_serial_clocks),
120 [1] = {
121 .hwport = 1,
122 .flags = 0,
123 .ucon = UCON,
124 .ulcon = ULCON,
125 .ufcon = UFCON,
126 .clocks = osiris_serial_clocks,
127 .clocks_size = ARRAY_SIZE(osiris_serial_clocks),
129 [2] = {
130 .hwport = 2,
131 .flags = 0,
132 .ucon = UCON,
133 .ulcon = ULCON,
134 .ufcon = UFCON,
135 .clocks = osiris_serial_clocks,
136 .clocks_size = ARRAY_SIZE(osiris_serial_clocks),
140 /* NAND Flash on Osiris board */
142 static int external_map[] = { 2 };
143 static int chip0_map[] = { 0 };
144 static int chip1_map[] = { 1 };
146 static struct mtd_partition osiris_default_nand_part[] = {
147 [0] = {
148 .name = "Boot Agent",
149 .size = SZ_16K,
150 .offset = 0,
152 [1] = {
153 .name = "/boot",
154 .size = SZ_4M - SZ_16K,
155 .offset = SZ_16K,
157 [2] = {
158 .name = "user1",
159 .offset = SZ_4M,
160 .size = SZ_32M - SZ_4M,
162 [3] = {
163 .name = "user2",
164 .offset = SZ_32M,
165 .size = MTDPART_SIZ_FULL,
169 static struct mtd_partition osiris_default_nand_part_large[] = {
170 [0] = {
171 .name = "Boot Agent",
172 .size = SZ_128K,
173 .offset = 0,
175 [1] = {
176 .name = "/boot",
177 .size = SZ_4M - SZ_128K,
178 .offset = SZ_128K,
180 [2] = {
181 .name = "user1",
182 .offset = SZ_4M,
183 .size = SZ_32M - SZ_4M,
185 [3] = {
186 .name = "user2",
187 .offset = SZ_32M,
188 .size = MTDPART_SIZ_FULL,
192 /* the Osiris has 3 selectable slots for nand-flash, the two
193 * on-board chip areas, as well as the external slot.
195 * Note, there is no current hot-plug support for the External
196 * socket.
199 static struct s3c2410_nand_set osiris_nand_sets[] = {
200 [1] = {
201 .name = "External",
202 .nr_chips = 1,
203 .nr_map = external_map,
204 .nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
205 .partitions = osiris_default_nand_part,
207 [0] = {
208 .name = "chip0",
209 .nr_chips = 1,
210 .nr_map = chip0_map,
211 .nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
212 .partitions = osiris_default_nand_part,
214 [2] = {
215 .name = "chip1",
216 .nr_chips = 1,
217 .nr_map = chip1_map,
218 .nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
219 .partitions = osiris_default_nand_part,
223 static void osiris_nand_select(struct s3c2410_nand_set *set, int slot)
225 unsigned int tmp;
227 slot = set->nr_map[slot] & 3;
229 pr_debug("osiris_nand: selecting slot %d (set %p,%p)\n",
230 slot, set, set->nr_map);
232 tmp = __raw_readb(OSIRIS_VA_CTRL0);
233 tmp &= ~OSIRIS_CTRL0_NANDSEL;
234 tmp |= slot;
236 pr_debug("osiris_nand: ctrl0 now %02x\n", tmp);
238 __raw_writeb(tmp, OSIRIS_VA_CTRL0);
241 static struct s3c2410_platform_nand osiris_nand_info = {
242 .tacls = 25,
243 .twrph0 = 60,
244 .twrph1 = 60,
245 .nr_sets = ARRAY_SIZE(osiris_nand_sets),
246 .sets = osiris_nand_sets,
247 .select_chip = osiris_nand_select,
250 /* PCMCIA control and configuration */
252 static struct resource osiris_pcmcia_resource[] = {
253 [0] = {
254 .start = 0x0f000000,
255 .end = 0x0f100000,
256 .flags = IORESOURCE_MEM,
258 [1] = {
259 .start = 0x0c000000,
260 .end = 0x0c100000,
261 .flags = IORESOURCE_MEM,
265 static struct platform_device osiris_pcmcia = {
266 .name = "osiris-pcmcia",
267 .id = -1,
268 .num_resources = ARRAY_SIZE(osiris_pcmcia_resource),
269 .resource = osiris_pcmcia_resource,
272 /* Osiris power management device */
274 #ifdef CONFIG_PM
275 static unsigned char pm_osiris_ctrl0;
277 static int osiris_pm_suspend(struct sys_device *sd, pm_message_t state)
279 unsigned int tmp;
281 pm_osiris_ctrl0 = __raw_readb(OSIRIS_VA_CTRL0);
282 tmp = pm_osiris_ctrl0 & ~OSIRIS_CTRL0_NANDSEL;
284 /* ensure correct NAND slot is selected on resume */
285 if ((pm_osiris_ctrl0 & OSIRIS_CTRL0_BOOT_INT) == 0)
286 tmp |= 2;
288 __raw_writeb(tmp, OSIRIS_VA_CTRL0);
290 /* ensure that an nRESET is not generated on resume. */
291 s3c2410_gpio_setpin(S3C2410_GPA21, 1);
292 s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_OUT);
294 return 0;
297 static int osiris_pm_resume(struct sys_device *sd)
299 if (pm_osiris_ctrl0 & OSIRIS_CTRL0_FIX8)
300 __raw_writeb(OSIRIS_CTRL1_FIX8, OSIRIS_VA_CTRL1);
302 __raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
304 s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_nRSTOUT);
306 return 0;
309 #else
310 #define osiris_pm_suspend NULL
311 #define osiris_pm_resume NULL
312 #endif
314 static struct sysdev_class osiris_pm_sysclass = {
315 .name = "mach-osiris",
316 .suspend = osiris_pm_suspend,
317 .resume = osiris_pm_resume,
320 static struct sys_device osiris_pm_sysdev = {
321 .cls = &osiris_pm_sysclass,
324 /* Standard Osiris devices */
326 static struct platform_device *osiris_devices[] __initdata = {
327 &s3c_device_i2c,
328 &s3c_device_wdt,
329 &s3c_device_nand,
330 &osiris_pcmcia,
333 static struct clk *osiris_clocks[] = {
334 &s3c24xx_dclk0,
335 &s3c24xx_dclk1,
336 &s3c24xx_clkout0,
337 &s3c24xx_clkout1,
338 &s3c24xx_uclk,
341 static void __init osiris_map_io(void)
343 unsigned long flags;
345 /* initialise the clocks */
347 s3c24xx_dclk0.parent = NULL;
348 s3c24xx_dclk0.rate = 12*1000*1000;
350 s3c24xx_dclk1.parent = NULL;
351 s3c24xx_dclk1.rate = 24*1000*1000;
353 s3c24xx_clkout0.parent = &s3c24xx_dclk0;
354 s3c24xx_clkout1.parent = &s3c24xx_dclk1;
356 s3c24xx_uclk.parent = &s3c24xx_clkout1;
358 s3c24xx_register_clocks(osiris_clocks, ARRAY_SIZE(osiris_clocks));
360 s3c_device_nand.dev.platform_data = &osiris_nand_info;
362 s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
363 s3c24xx_init_clocks(0);
364 s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
366 /* check for the newer revision boards with large page nand */
368 if ((__raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK) >= 4) {
369 printk(KERN_INFO "OSIRIS-B detected (revision %d)\n",
370 __raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK);
371 osiris_nand_sets[0].partitions = osiris_default_nand_part_large;
372 osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large);
373 } else {
374 /* write-protect line to the NAND */
375 s3c2410_gpio_setpin(S3C2410_GPA0, 1);
378 /* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
380 local_irq_save(flags);
381 __raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_ST1 | S3C2410_BWSCON_ST2 | S3C2410_BWSCON_ST3 | S3C2410_BWSCON_ST4 | S3C2410_BWSCON_ST5, S3C2410_BWSCON);
382 local_irq_restore(flags);
385 static void __init osiris_init(void)
387 sysdev_class_register(&osiris_pm_sysclass);
388 sysdev_register(&osiris_pm_sysdev);
390 platform_add_devices(osiris_devices, ARRAY_SIZE(osiris_devices));
393 MACHINE_START(OSIRIS, "Simtec-OSIRIS")
394 /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
395 .phys_io = S3C2410_PA_UART,
396 .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
397 .boot_params = S3C2410_SDRAM_PA + 0x100,
398 .map_io = osiris_map_io,
399 .init_machine = osiris_init,
400 .init_irq = s3c24xx_init_irq,
401 .init_machine = osiris_init,
402 .timer = &s3c24xx_timer,
403 MACHINE_END