4 * Copyright (C) 1991, 1992, 2002 Linus Torvalds
8 * Start bdflush() with kernel_thread not syscall - Paul Gortmaker, 12/95
10 * Removed a lot of unnecessary code and simplified things now that
11 * the buffer cache isn't our primary cache - Andrew Tridgell 12/96
13 * Speed up hash, lru, and free list operations. Use gfp() for allocating
14 * hash table, use SLAB cache for buffer heads. SMP threading. -DaveM
16 * Added 32k buffer block sizes - these are required older ARM systems. - RMK
18 * async buffer flushing, 1999 Andrea Arcangeli <andrea@suse.de>
21 #include <linux/kernel.h>
22 #include <linux/syscalls.h>
25 #include <linux/percpu.h>
26 #include <linux/slab.h>
27 #include <linux/capability.h>
28 #include <linux/blkdev.h>
29 #include <linux/file.h>
30 #include <linux/quotaops.h>
31 #include <linux/highmem.h>
32 #include <linux/module.h>
33 #include <linux/writeback.h>
34 #include <linux/hash.h>
35 #include <linux/suspend.h>
36 #include <linux/buffer_head.h>
37 #include <linux/task_io_accounting_ops.h>
38 #include <linux/bio.h>
39 #include <linux/notifier.h>
40 #include <linux/cpu.h>
41 #include <linux/bitops.h>
42 #include <linux/mpage.h>
43 #include <linux/bit_spinlock.h>
45 static int fsync_buffers_list(spinlock_t
*lock
, struct list_head
*list
);
47 #define BH_ENTRY(list) list_entry((list), struct buffer_head, b_assoc_buffers)
50 init_buffer(struct buffer_head
*bh
, bh_end_io_t
*handler
, void *private)
52 bh
->b_end_io
= handler
;
53 bh
->b_private
= private;
55 EXPORT_SYMBOL(init_buffer
);
57 static int sync_buffer(void *word
)
59 struct block_device
*bd
;
60 struct buffer_head
*bh
61 = container_of(word
, struct buffer_head
, b_state
);
66 blk_run_address_space(bd
->bd_inode
->i_mapping
);
71 void __lock_buffer(struct buffer_head
*bh
)
73 wait_on_bit_lock(&bh
->b_state
, BH_Lock
, sync_buffer
,
74 TASK_UNINTERRUPTIBLE
);
76 EXPORT_SYMBOL(__lock_buffer
);
78 void unlock_buffer(struct buffer_head
*bh
)
80 clear_bit_unlock(BH_Lock
, &bh
->b_state
);
81 smp_mb__after_clear_bit();
82 wake_up_bit(&bh
->b_state
, BH_Lock
);
84 EXPORT_SYMBOL(unlock_buffer
);
87 * Block until a buffer comes unlocked. This doesn't stop it
88 * from becoming locked again - you have to lock it yourself
89 * if you want to preserve its state.
91 void __wait_on_buffer(struct buffer_head
* bh
)
93 wait_on_bit(&bh
->b_state
, BH_Lock
, sync_buffer
, TASK_UNINTERRUPTIBLE
);
95 EXPORT_SYMBOL(__wait_on_buffer
);
98 __clear_page_buffers(struct page
*page
)
100 ClearPagePrivate(page
);
101 set_page_private(page
, 0);
102 page_cache_release(page
);
106 static int quiet_error(struct buffer_head
*bh
)
108 if (!test_bit(BH_Quiet
, &bh
->b_state
) && printk_ratelimit())
114 static void buffer_io_error(struct buffer_head
*bh
)
116 char b
[BDEVNAME_SIZE
];
117 printk(KERN_ERR
"Buffer I/O error on device %s, logical block %Lu\n",
118 bdevname(bh
->b_bdev
, b
),
119 (unsigned long long)bh
->b_blocknr
);
123 * End-of-IO handler helper function which does not touch the bh after
125 * Note: unlock_buffer() sort-of does touch the bh after unlocking it, but
126 * a race there is benign: unlock_buffer() only use the bh's address for
127 * hashing after unlocking the buffer, so it doesn't actually touch the bh
130 static void __end_buffer_read_notouch(struct buffer_head
*bh
, int uptodate
)
133 set_buffer_uptodate(bh
);
135 /* This happens, due to failed READA attempts. */
136 clear_buffer_uptodate(bh
);
142 * Default synchronous end-of-IO handler.. Just mark it up-to-date and
143 * unlock the buffer. This is what ll_rw_block uses too.
145 void end_buffer_read_sync(struct buffer_head
*bh
, int uptodate
)
147 __end_buffer_read_notouch(bh
, uptodate
);
150 EXPORT_SYMBOL(end_buffer_read_sync
);
152 void end_buffer_write_sync(struct buffer_head
*bh
, int uptodate
)
154 char b
[BDEVNAME_SIZE
];
157 set_buffer_uptodate(bh
);
159 if (!buffer_eopnotsupp(bh
) && !quiet_error(bh
)) {
161 printk(KERN_WARNING
"lost page write due to "
163 bdevname(bh
->b_bdev
, b
));
165 set_buffer_write_io_error(bh
);
166 clear_buffer_uptodate(bh
);
171 EXPORT_SYMBOL(end_buffer_write_sync
);
174 * Various filesystems appear to want __find_get_block to be non-blocking.
175 * But it's the page lock which protects the buffers. To get around this,
176 * we get exclusion from try_to_free_buffers with the blockdev mapping's
179 * Hack idea: for the blockdev mapping, i_bufferlist_lock contention
180 * may be quite high. This code could TryLock the page, and if that
181 * succeeds, there is no need to take private_lock. (But if
182 * private_lock is contended then so is mapping->tree_lock).
184 static struct buffer_head
*
185 __find_get_block_slow(struct block_device
*bdev
, sector_t block
)
187 struct inode
*bd_inode
= bdev
->bd_inode
;
188 struct address_space
*bd_mapping
= bd_inode
->i_mapping
;
189 struct buffer_head
*ret
= NULL
;
191 struct buffer_head
*bh
;
192 struct buffer_head
*head
;
196 index
= block
>> (PAGE_CACHE_SHIFT
- bd_inode
->i_blkbits
);
197 page
= find_get_page(bd_mapping
, index
);
201 spin_lock(&bd_mapping
->private_lock
);
202 if (!page_has_buffers(page
))
204 head
= page_buffers(page
);
207 if (!buffer_mapped(bh
))
209 else if (bh
->b_blocknr
== block
) {
214 bh
= bh
->b_this_page
;
215 } while (bh
!= head
);
217 /* we might be here because some of the buffers on this page are
218 * not mapped. This is due to various races between
219 * file io on the block device and getblk. It gets dealt with
220 * elsewhere, don't buffer_error if we had some unmapped buffers
223 printk("__find_get_block_slow() failed. "
224 "block=%llu, b_blocknr=%llu\n",
225 (unsigned long long)block
,
226 (unsigned long long)bh
->b_blocknr
);
227 printk("b_state=0x%08lx, b_size=%zu\n",
228 bh
->b_state
, bh
->b_size
);
229 printk("device blocksize: %d\n", 1 << bd_inode
->i_blkbits
);
232 spin_unlock(&bd_mapping
->private_lock
);
233 page_cache_release(page
);
238 /* If invalidate_buffers() will trash dirty buffers, it means some kind
239 of fs corruption is going on. Trashing dirty data always imply losing
240 information that was supposed to be just stored on the physical layer
243 Thus invalidate_buffers in general usage is not allwowed to trash
244 dirty buffers. For example ioctl(FLSBLKBUF) expects dirty data to
245 be preserved. These buffers are simply skipped.
247 We also skip buffers which are still in use. For example this can
248 happen if a userspace program is reading the block device.
250 NOTE: In the case where the user removed a removable-media-disk even if
251 there's still dirty data not synced on disk (due a bug in the device driver
252 or due an error of the user), by not destroying the dirty buffers we could
253 generate corruption also on the next media inserted, thus a parameter is
254 necessary to handle this case in the most safe way possible (trying
255 to not corrupt also the new disk inserted with the data belonging to
256 the old now corrupted disk). Also for the ramdisk the natural thing
257 to do in order to release the ramdisk memory is to destroy dirty buffers.
259 These are two special cases. Normal usage imply the device driver
260 to issue a sync on the device (without waiting I/O completion) and
261 then an invalidate_buffers call that doesn't trash dirty buffers.
263 For handling cache coherency with the blkdev pagecache the 'update' case
264 is been introduced. It is needed to re-read from disk any pinned
265 buffer. NOTE: re-reading from disk is destructive so we can do it only
266 when we assume nobody is changing the buffercache under our I/O and when
267 we think the disk contains more recent information than the buffercache.
268 The update == 1 pass marks the buffers we need to update, the update == 2
269 pass does the actual I/O. */
270 void invalidate_bdev(struct block_device
*bdev
)
272 struct address_space
*mapping
= bdev
->bd_inode
->i_mapping
;
274 if (mapping
->nrpages
== 0)
277 invalidate_bh_lrus();
278 invalidate_mapping_pages(mapping
, 0, -1);
280 EXPORT_SYMBOL(invalidate_bdev
);
283 * Kick pdflush then try to free up some ZONE_NORMAL memory.
285 static void free_more_memory(void)
290 wakeup_flusher_threads(1024);
293 for_each_online_node(nid
) {
294 (void)first_zones_zonelist(node_zonelist(nid
, GFP_NOFS
),
295 gfp_zone(GFP_NOFS
), NULL
,
298 try_to_free_pages(node_zonelist(nid
, GFP_NOFS
), 0,
304 * I/O completion handler for block_read_full_page() - pages
305 * which come unlocked at the end of I/O.
307 static void end_buffer_async_read(struct buffer_head
*bh
, int uptodate
)
310 struct buffer_head
*first
;
311 struct buffer_head
*tmp
;
313 int page_uptodate
= 1;
315 BUG_ON(!buffer_async_read(bh
));
319 set_buffer_uptodate(bh
);
321 clear_buffer_uptodate(bh
);
322 if (!quiet_error(bh
))
328 * Be _very_ careful from here on. Bad things can happen if
329 * two buffer heads end IO at almost the same time and both
330 * decide that the page is now completely done.
332 first
= page_buffers(page
);
333 local_irq_save(flags
);
334 bit_spin_lock(BH_Uptodate_Lock
, &first
->b_state
);
335 clear_buffer_async_read(bh
);
339 if (!buffer_uptodate(tmp
))
341 if (buffer_async_read(tmp
)) {
342 BUG_ON(!buffer_locked(tmp
));
345 tmp
= tmp
->b_this_page
;
347 bit_spin_unlock(BH_Uptodate_Lock
, &first
->b_state
);
348 local_irq_restore(flags
);
351 * If none of the buffers had errors and they are all
352 * uptodate then we can set the page uptodate.
354 if (page_uptodate
&& !PageError(page
))
355 SetPageUptodate(page
);
360 bit_spin_unlock(BH_Uptodate_Lock
, &first
->b_state
);
361 local_irq_restore(flags
);
366 * Completion handler for block_write_full_page() - pages which are unlocked
367 * during I/O, and which have PageWriteback cleared upon I/O completion.
369 void end_buffer_async_write(struct buffer_head
*bh
, int uptodate
)
371 char b
[BDEVNAME_SIZE
];
373 struct buffer_head
*first
;
374 struct buffer_head
*tmp
;
377 BUG_ON(!buffer_async_write(bh
));
381 set_buffer_uptodate(bh
);
383 if (!quiet_error(bh
)) {
385 printk(KERN_WARNING
"lost page write due to "
387 bdevname(bh
->b_bdev
, b
));
389 set_bit(AS_EIO
, &page
->mapping
->flags
);
390 set_buffer_write_io_error(bh
);
391 clear_buffer_uptodate(bh
);
395 first
= page_buffers(page
);
396 local_irq_save(flags
);
397 bit_spin_lock(BH_Uptodate_Lock
, &first
->b_state
);
399 clear_buffer_async_write(bh
);
401 tmp
= bh
->b_this_page
;
403 if (buffer_async_write(tmp
)) {
404 BUG_ON(!buffer_locked(tmp
));
407 tmp
= tmp
->b_this_page
;
409 bit_spin_unlock(BH_Uptodate_Lock
, &first
->b_state
);
410 local_irq_restore(flags
);
411 end_page_writeback(page
);
415 bit_spin_unlock(BH_Uptodate_Lock
, &first
->b_state
);
416 local_irq_restore(flags
);
419 EXPORT_SYMBOL(end_buffer_async_write
);
422 * If a page's buffers are under async readin (end_buffer_async_read
423 * completion) then there is a possibility that another thread of
424 * control could lock one of the buffers after it has completed
425 * but while some of the other buffers have not completed. This
426 * locked buffer would confuse end_buffer_async_read() into not unlocking
427 * the page. So the absence of BH_Async_Read tells end_buffer_async_read()
428 * that this buffer is not under async I/O.
430 * The page comes unlocked when it has no locked buffer_async buffers
433 * PageLocked prevents anyone starting new async I/O reads any of
436 * PageWriteback is used to prevent simultaneous writeout of the same
439 * PageLocked prevents anyone from starting writeback of a page which is
440 * under read I/O (PageWriteback is only ever set against a locked page).
442 static void mark_buffer_async_read(struct buffer_head
*bh
)
444 bh
->b_end_io
= end_buffer_async_read
;
445 set_buffer_async_read(bh
);
448 static void mark_buffer_async_write_endio(struct buffer_head
*bh
,
449 bh_end_io_t
*handler
)
451 bh
->b_end_io
= handler
;
452 set_buffer_async_write(bh
);
455 void mark_buffer_async_write(struct buffer_head
*bh
)
457 mark_buffer_async_write_endio(bh
, end_buffer_async_write
);
459 EXPORT_SYMBOL(mark_buffer_async_write
);
463 * fs/buffer.c contains helper functions for buffer-backed address space's
464 * fsync functions. A common requirement for buffer-based filesystems is
465 * that certain data from the backing blockdev needs to be written out for
466 * a successful fsync(). For example, ext2 indirect blocks need to be
467 * written back and waited upon before fsync() returns.
469 * The functions mark_buffer_inode_dirty(), fsync_inode_buffers(),
470 * inode_has_buffers() and invalidate_inode_buffers() are provided for the
471 * management of a list of dependent buffers at ->i_mapping->private_list.
473 * Locking is a little subtle: try_to_free_buffers() will remove buffers
474 * from their controlling inode's queue when they are being freed. But
475 * try_to_free_buffers() will be operating against the *blockdev* mapping
476 * at the time, not against the S_ISREG file which depends on those buffers.
477 * So the locking for private_list is via the private_lock in the address_space
478 * which backs the buffers. Which is different from the address_space
479 * against which the buffers are listed. So for a particular address_space,
480 * mapping->private_lock does *not* protect mapping->private_list! In fact,
481 * mapping->private_list will always be protected by the backing blockdev's
484 * Which introduces a requirement: all buffers on an address_space's
485 * ->private_list must be from the same address_space: the blockdev's.
487 * address_spaces which do not place buffers at ->private_list via these
488 * utility functions are free to use private_lock and private_list for
489 * whatever they want. The only requirement is that list_empty(private_list)
490 * be true at clear_inode() time.
492 * FIXME: clear_inode should not call invalidate_inode_buffers(). The
493 * filesystems should do that. invalidate_inode_buffers() should just go
494 * BUG_ON(!list_empty).
496 * FIXME: mark_buffer_dirty_inode() is a data-plane operation. It should
497 * take an address_space, not an inode. And it should be called
498 * mark_buffer_dirty_fsync() to clearly define why those buffers are being
501 * FIXME: mark_buffer_dirty_inode() doesn't need to add the buffer to the
502 * list if it is already on a list. Because if the buffer is on a list,
503 * it *must* already be on the right one. If not, the filesystem is being
504 * silly. This will save a ton of locking. But first we have to ensure
505 * that buffers are taken *off* the old inode's list when they are freed
506 * (presumably in truncate). That requires careful auditing of all
507 * filesystems (do it inside bforget()). It could also be done by bringing
512 * The buffer's backing address_space's private_lock must be held
514 static void __remove_assoc_queue(struct buffer_head
*bh
)
516 list_del_init(&bh
->b_assoc_buffers
);
517 WARN_ON(!bh
->b_assoc_map
);
518 if (buffer_write_io_error(bh
))
519 set_bit(AS_EIO
, &bh
->b_assoc_map
->flags
);
520 bh
->b_assoc_map
= NULL
;
523 int inode_has_buffers(struct inode
*inode
)
525 return !list_empty(&inode
->i_data
.private_list
);
529 * osync is designed to support O_SYNC io. It waits synchronously for
530 * all already-submitted IO to complete, but does not queue any new
531 * writes to the disk.
533 * To do O_SYNC writes, just queue the buffer writes with ll_rw_block as
534 * you dirty the buffers, and then use osync_inode_buffers to wait for
535 * completion. Any other dirty buffers which are not yet queued for
536 * write will not be flushed to disk by the osync.
538 static int osync_buffers_list(spinlock_t
*lock
, struct list_head
*list
)
540 struct buffer_head
*bh
;
546 list_for_each_prev(p
, list
) {
548 if (buffer_locked(bh
)) {
552 if (!buffer_uptodate(bh
))
563 static void do_thaw_all(struct work_struct
*work
)
565 struct super_block
*sb
;
566 char b
[BDEVNAME_SIZE
];
570 list_for_each_entry(sb
, &super_blocks
, s_list
) {
572 spin_unlock(&sb_lock
);
573 down_read(&sb
->s_umount
);
574 while (sb
->s_bdev
&& !thaw_bdev(sb
->s_bdev
, sb
))
575 printk(KERN_WARNING
"Emergency Thaw on %s\n",
576 bdevname(sb
->s_bdev
, b
));
577 up_read(&sb
->s_umount
);
579 if (__put_super_and_need_restart(sb
))
582 spin_unlock(&sb_lock
);
584 printk(KERN_WARNING
"Emergency Thaw complete\n");
588 * emergency_thaw_all -- forcibly thaw every frozen filesystem
590 * Used for emergency unfreeze of all filesystems via SysRq
592 void emergency_thaw_all(void)
594 struct work_struct
*work
;
596 work
= kmalloc(sizeof(*work
), GFP_ATOMIC
);
598 INIT_WORK(work
, do_thaw_all
);
604 * sync_mapping_buffers - write out & wait upon a mapping's "associated" buffers
605 * @mapping: the mapping which wants those buffers written
607 * Starts I/O against the buffers at mapping->private_list, and waits upon
610 * Basically, this is a convenience function for fsync().
611 * @mapping is a file or directory which needs those buffers to be written for
612 * a successful fsync().
614 int sync_mapping_buffers(struct address_space
*mapping
)
616 struct address_space
*buffer_mapping
= mapping
->assoc_mapping
;
618 if (buffer_mapping
== NULL
|| list_empty(&mapping
->private_list
))
621 return fsync_buffers_list(&buffer_mapping
->private_lock
,
622 &mapping
->private_list
);
624 EXPORT_SYMBOL(sync_mapping_buffers
);
627 * Called when we've recently written block `bblock', and it is known that
628 * `bblock' was for a buffer_boundary() buffer. This means that the block at
629 * `bblock + 1' is probably a dirty indirect block. Hunt it down and, if it's
630 * dirty, schedule it for IO. So that indirects merge nicely with their data.
632 void write_boundary_block(struct block_device
*bdev
,
633 sector_t bblock
, unsigned blocksize
)
635 struct buffer_head
*bh
= __find_get_block(bdev
, bblock
+ 1, blocksize
);
637 if (buffer_dirty(bh
))
638 ll_rw_block(WRITE
, 1, &bh
);
643 void mark_buffer_dirty_inode(struct buffer_head
*bh
, struct inode
*inode
)
645 struct address_space
*mapping
= inode
->i_mapping
;
646 struct address_space
*buffer_mapping
= bh
->b_page
->mapping
;
648 mark_buffer_dirty(bh
);
649 if (!mapping
->assoc_mapping
) {
650 mapping
->assoc_mapping
= buffer_mapping
;
652 BUG_ON(mapping
->assoc_mapping
!= buffer_mapping
);
654 if (!bh
->b_assoc_map
) {
655 spin_lock(&buffer_mapping
->private_lock
);
656 list_move_tail(&bh
->b_assoc_buffers
,
657 &mapping
->private_list
);
658 bh
->b_assoc_map
= mapping
;
659 spin_unlock(&buffer_mapping
->private_lock
);
662 EXPORT_SYMBOL(mark_buffer_dirty_inode
);
665 * Mark the page dirty, and set it dirty in the radix tree, and mark the inode
668 * If warn is true, then emit a warning if the page is not uptodate and has
669 * not been truncated.
671 static void __set_page_dirty(struct page
*page
,
672 struct address_space
*mapping
, int warn
)
674 spin_lock_irq(&mapping
->tree_lock
);
675 if (page
->mapping
) { /* Race with truncate? */
676 WARN_ON_ONCE(warn
&& !PageUptodate(page
));
677 account_page_dirtied(page
, mapping
);
678 radix_tree_tag_set(&mapping
->page_tree
,
679 page_index(page
), PAGECACHE_TAG_DIRTY
);
681 spin_unlock_irq(&mapping
->tree_lock
);
682 __mark_inode_dirty(mapping
->host
, I_DIRTY_PAGES
);
686 * Add a page to the dirty page list.
688 * It is a sad fact of life that this function is called from several places
689 * deeply under spinlocking. It may not sleep.
691 * If the page has buffers, the uptodate buffers are set dirty, to preserve
692 * dirty-state coherency between the page and the buffers. It the page does
693 * not have buffers then when they are later attached they will all be set
696 * The buffers are dirtied before the page is dirtied. There's a small race
697 * window in which a writepage caller may see the page cleanness but not the
698 * buffer dirtiness. That's fine. If this code were to set the page dirty
699 * before the buffers, a concurrent writepage caller could clear the page dirty
700 * bit, see a bunch of clean buffers and we'd end up with dirty buffers/clean
701 * page on the dirty page list.
703 * We use private_lock to lock against try_to_free_buffers while using the
704 * page's buffer list. Also use this to protect against clean buffers being
705 * added to the page after it was set dirty.
707 * FIXME: may need to call ->reservepage here as well. That's rather up to the
708 * address_space though.
710 int __set_page_dirty_buffers(struct page
*page
)
713 struct address_space
*mapping
= page_mapping(page
);
715 if (unlikely(!mapping
))
716 return !TestSetPageDirty(page
);
718 spin_lock(&mapping
->private_lock
);
719 if (page_has_buffers(page
)) {
720 struct buffer_head
*head
= page_buffers(page
);
721 struct buffer_head
*bh
= head
;
724 set_buffer_dirty(bh
);
725 bh
= bh
->b_this_page
;
726 } while (bh
!= head
);
728 newly_dirty
= !TestSetPageDirty(page
);
729 spin_unlock(&mapping
->private_lock
);
732 __set_page_dirty(page
, mapping
, 1);
735 EXPORT_SYMBOL(__set_page_dirty_buffers
);
738 * Write out and wait upon a list of buffers.
740 * We have conflicting pressures: we want to make sure that all
741 * initially dirty buffers get waited on, but that any subsequently
742 * dirtied buffers don't. After all, we don't want fsync to last
743 * forever if somebody is actively writing to the file.
745 * Do this in two main stages: first we copy dirty buffers to a
746 * temporary inode list, queueing the writes as we go. Then we clean
747 * up, waiting for those writes to complete.
749 * During this second stage, any subsequent updates to the file may end
750 * up refiling the buffer on the original inode's dirty list again, so
751 * there is a chance we will end up with a buffer queued for write but
752 * not yet completed on that list. So, as a final cleanup we go through
753 * the osync code to catch these locked, dirty buffers without requeuing
754 * any newly dirty buffers for write.
756 static int fsync_buffers_list(spinlock_t
*lock
, struct list_head
*list
)
758 struct buffer_head
*bh
;
759 struct list_head tmp
;
760 struct address_space
*mapping
, *prev_mapping
= NULL
;
763 INIT_LIST_HEAD(&tmp
);
766 while (!list_empty(list
)) {
767 bh
= BH_ENTRY(list
->next
);
768 mapping
= bh
->b_assoc_map
;
769 __remove_assoc_queue(bh
);
770 /* Avoid race with mark_buffer_dirty_inode() which does
771 * a lockless check and we rely on seeing the dirty bit */
773 if (buffer_dirty(bh
) || buffer_locked(bh
)) {
774 list_add(&bh
->b_assoc_buffers
, &tmp
);
775 bh
->b_assoc_map
= mapping
;
776 if (buffer_dirty(bh
)) {
780 * Ensure any pending I/O completes so that
781 * ll_rw_block() actually writes the current
782 * contents - it is a noop if I/O is still in
783 * flight on potentially older contents.
785 ll_rw_block(SWRITE_SYNC_PLUG
, 1, &bh
);
788 * Kick off IO for the previous mapping. Note
789 * that we will not run the very last mapping,
790 * wait_on_buffer() will do that for us
791 * through sync_buffer().
793 if (prev_mapping
&& prev_mapping
!= mapping
)
794 blk_run_address_space(prev_mapping
);
795 prev_mapping
= mapping
;
803 while (!list_empty(&tmp
)) {
804 bh
= BH_ENTRY(tmp
.prev
);
806 mapping
= bh
->b_assoc_map
;
807 __remove_assoc_queue(bh
);
808 /* Avoid race with mark_buffer_dirty_inode() which does
809 * a lockless check and we rely on seeing the dirty bit */
811 if (buffer_dirty(bh
)) {
812 list_add(&bh
->b_assoc_buffers
,
813 &mapping
->private_list
);
814 bh
->b_assoc_map
= mapping
;
818 if (!buffer_uptodate(bh
))
825 err2
= osync_buffers_list(lock
, list
);
833 * Invalidate any and all dirty buffers on a given inode. We are
834 * probably unmounting the fs, but that doesn't mean we have already
835 * done a sync(). Just drop the buffers from the inode list.
837 * NOTE: we take the inode's blockdev's mapping's private_lock. Which
838 * assumes that all the buffers are against the blockdev. Not true
841 void invalidate_inode_buffers(struct inode
*inode
)
843 if (inode_has_buffers(inode
)) {
844 struct address_space
*mapping
= &inode
->i_data
;
845 struct list_head
*list
= &mapping
->private_list
;
846 struct address_space
*buffer_mapping
= mapping
->assoc_mapping
;
848 spin_lock(&buffer_mapping
->private_lock
);
849 while (!list_empty(list
))
850 __remove_assoc_queue(BH_ENTRY(list
->next
));
851 spin_unlock(&buffer_mapping
->private_lock
);
854 EXPORT_SYMBOL(invalidate_inode_buffers
);
857 * Remove any clean buffers from the inode's buffer list. This is called
858 * when we're trying to free the inode itself. Those buffers can pin it.
860 * Returns true if all buffers were removed.
862 int remove_inode_buffers(struct inode
*inode
)
866 if (inode_has_buffers(inode
)) {
867 struct address_space
*mapping
= &inode
->i_data
;
868 struct list_head
*list
= &mapping
->private_list
;
869 struct address_space
*buffer_mapping
= mapping
->assoc_mapping
;
871 spin_lock(&buffer_mapping
->private_lock
);
872 while (!list_empty(list
)) {
873 struct buffer_head
*bh
= BH_ENTRY(list
->next
);
874 if (buffer_dirty(bh
)) {
878 __remove_assoc_queue(bh
);
880 spin_unlock(&buffer_mapping
->private_lock
);
886 * Create the appropriate buffers when given a page for data area and
887 * the size of each buffer.. Use the bh->b_this_page linked list to
888 * follow the buffers created. Return NULL if unable to create more
891 * The retry flag is used to differentiate async IO (paging, swapping)
892 * which may not fail from ordinary buffer allocations.
894 struct buffer_head
*alloc_page_buffers(struct page
*page
, unsigned long size
,
897 struct buffer_head
*bh
, *head
;
903 while ((offset
-= size
) >= 0) {
904 bh
= alloc_buffer_head(GFP_NOFS
);
909 bh
->b_this_page
= head
;
914 atomic_set(&bh
->b_count
, 0);
915 bh
->b_private
= NULL
;
918 /* Link the buffer to its page */
919 set_bh_page(bh
, page
, offset
);
921 init_buffer(bh
, NULL
, NULL
);
925 * In case anything failed, we just free everything we got.
931 head
= head
->b_this_page
;
932 free_buffer_head(bh
);
937 * Return failure for non-async IO requests. Async IO requests
938 * are not allowed to fail, so we have to wait until buffer heads
939 * become available. But we don't want tasks sleeping with
940 * partially complete buffers, so all were released above.
945 /* We're _really_ low on memory. Now we just
946 * wait for old buffer heads to become free due to
947 * finishing IO. Since this is an async request and
948 * the reserve list is empty, we're sure there are
949 * async buffer heads in use.
954 EXPORT_SYMBOL_GPL(alloc_page_buffers
);
957 link_dev_buffers(struct page
*page
, struct buffer_head
*head
)
959 struct buffer_head
*bh
, *tail
;
964 bh
= bh
->b_this_page
;
966 tail
->b_this_page
= head
;
967 attach_page_buffers(page
, head
);
971 * Initialise the state of a blockdev page's buffers.
974 init_page_buffers(struct page
*page
, struct block_device
*bdev
,
975 sector_t block
, int size
)
977 struct buffer_head
*head
= page_buffers(page
);
978 struct buffer_head
*bh
= head
;
979 int uptodate
= PageUptodate(page
);
982 if (!buffer_mapped(bh
)) {
983 init_buffer(bh
, NULL
, NULL
);
985 bh
->b_blocknr
= block
;
987 set_buffer_uptodate(bh
);
988 set_buffer_mapped(bh
);
991 bh
= bh
->b_this_page
;
992 } while (bh
!= head
);
996 * Create the page-cache page that contains the requested block.
998 * This is user purely for blockdev mappings.
1000 static struct page
*
1001 grow_dev_page(struct block_device
*bdev
, sector_t block
,
1002 pgoff_t index
, int size
)
1004 struct inode
*inode
= bdev
->bd_inode
;
1006 struct buffer_head
*bh
;
1008 page
= find_or_create_page(inode
->i_mapping
, index
,
1009 (mapping_gfp_mask(inode
->i_mapping
) & ~__GFP_FS
)|__GFP_MOVABLE
);
1013 BUG_ON(!PageLocked(page
));
1015 if (page_has_buffers(page
)) {
1016 bh
= page_buffers(page
);
1017 if (bh
->b_size
== size
) {
1018 init_page_buffers(page
, bdev
, block
, size
);
1021 if (!try_to_free_buffers(page
))
1026 * Allocate some buffers for this page
1028 bh
= alloc_page_buffers(page
, size
, 0);
1033 * Link the page to the buffers and initialise them. Take the
1034 * lock to be atomic wrt __find_get_block(), which does not
1035 * run under the page lock.
1037 spin_lock(&inode
->i_mapping
->private_lock
);
1038 link_dev_buffers(page
, bh
);
1039 init_page_buffers(page
, bdev
, block
, size
);
1040 spin_unlock(&inode
->i_mapping
->private_lock
);
1046 page_cache_release(page
);
1051 * Create buffers for the specified block device block's page. If
1052 * that page was dirty, the buffers are set dirty also.
1055 grow_buffers(struct block_device
*bdev
, sector_t block
, int size
)
1064 } while ((size
<< sizebits
) < PAGE_SIZE
);
1066 index
= block
>> sizebits
;
1069 * Check for a block which wants to lie outside our maximum possible
1070 * pagecache index. (this comparison is done using sector_t types).
1072 if (unlikely(index
!= block
>> sizebits
)) {
1073 char b
[BDEVNAME_SIZE
];
1075 printk(KERN_ERR
"%s: requested out-of-range block %llu for "
1077 __func__
, (unsigned long long)block
,
1081 block
= index
<< sizebits
;
1082 /* Create a page with the proper size buffers.. */
1083 page
= grow_dev_page(bdev
, block
, index
, size
);
1087 page_cache_release(page
);
1091 static struct buffer_head
*
1092 __getblk_slow(struct block_device
*bdev
, sector_t block
, int size
)
1094 /* Size must be multiple of hard sectorsize */
1095 if (unlikely(size
& (bdev_logical_block_size(bdev
)-1) ||
1096 (size
< 512 || size
> PAGE_SIZE
))) {
1097 printk(KERN_ERR
"getblk(): invalid block size %d requested\n",
1099 printk(KERN_ERR
"logical block size: %d\n",
1100 bdev_logical_block_size(bdev
));
1107 struct buffer_head
* bh
;
1110 bh
= __find_get_block(bdev
, block
, size
);
1114 ret
= grow_buffers(bdev
, block
, size
);
1123 * The relationship between dirty buffers and dirty pages:
1125 * Whenever a page has any dirty buffers, the page's dirty bit is set, and
1126 * the page is tagged dirty in its radix tree.
1128 * At all times, the dirtiness of the buffers represents the dirtiness of
1129 * subsections of the page. If the page has buffers, the page dirty bit is
1130 * merely a hint about the true dirty state.
1132 * When a page is set dirty in its entirety, all its buffers are marked dirty
1133 * (if the page has buffers).
1135 * When a buffer is marked dirty, its page is dirtied, but the page's other
1138 * Also. When blockdev buffers are explicitly read with bread(), they
1139 * individually become uptodate. But their backing page remains not
1140 * uptodate - even if all of its buffers are uptodate. A subsequent
1141 * block_read_full_page() against that page will discover all the uptodate
1142 * buffers, will set the page uptodate and will perform no I/O.
1146 * mark_buffer_dirty - mark a buffer_head as needing writeout
1147 * @bh: the buffer_head to mark dirty
1149 * mark_buffer_dirty() will set the dirty bit against the buffer, then set its
1150 * backing page dirty, then tag the page as dirty in its address_space's radix
1151 * tree and then attach the address_space's inode to its superblock's dirty
1154 * mark_buffer_dirty() is atomic. It takes bh->b_page->mapping->private_lock,
1155 * mapping->tree_lock and the global inode_lock.
1157 void mark_buffer_dirty(struct buffer_head
*bh
)
1159 WARN_ON_ONCE(!buffer_uptodate(bh
));
1162 * Very *carefully* optimize the it-is-already-dirty case.
1164 * Don't let the final "is it dirty" escape to before we
1165 * perhaps modified the buffer.
1167 if (buffer_dirty(bh
)) {
1169 if (buffer_dirty(bh
))
1173 if (!test_set_buffer_dirty(bh
)) {
1174 struct page
*page
= bh
->b_page
;
1175 if (!TestSetPageDirty(page
)) {
1176 struct address_space
*mapping
= page_mapping(page
);
1178 __set_page_dirty(page
, mapping
, 0);
1182 EXPORT_SYMBOL(mark_buffer_dirty
);
1185 * Decrement a buffer_head's reference count. If all buffers against a page
1186 * have zero reference count, are clean and unlocked, and if the page is clean
1187 * and unlocked then try_to_free_buffers() may strip the buffers from the page
1188 * in preparation for freeing it (sometimes, rarely, buffers are removed from
1189 * a page but it ends up not being freed, and buffers may later be reattached).
1191 void __brelse(struct buffer_head
* buf
)
1193 if (atomic_read(&buf
->b_count
)) {
1197 WARN(1, KERN_ERR
"VFS: brelse: Trying to free free buffer\n");
1199 EXPORT_SYMBOL(__brelse
);
1202 * bforget() is like brelse(), except it discards any
1203 * potentially dirty data.
1205 void __bforget(struct buffer_head
*bh
)
1207 clear_buffer_dirty(bh
);
1208 if (bh
->b_assoc_map
) {
1209 struct address_space
*buffer_mapping
= bh
->b_page
->mapping
;
1211 spin_lock(&buffer_mapping
->private_lock
);
1212 list_del_init(&bh
->b_assoc_buffers
);
1213 bh
->b_assoc_map
= NULL
;
1214 spin_unlock(&buffer_mapping
->private_lock
);
1218 EXPORT_SYMBOL(__bforget
);
1220 static struct buffer_head
*__bread_slow(struct buffer_head
*bh
)
1223 if (buffer_uptodate(bh
)) {
1228 bh
->b_end_io
= end_buffer_read_sync
;
1229 submit_bh(READ
, bh
);
1231 if (buffer_uptodate(bh
))
1239 * Per-cpu buffer LRU implementation. To reduce the cost of __find_get_block().
1240 * The bhs[] array is sorted - newest buffer is at bhs[0]. Buffers have their
1241 * refcount elevated by one when they're in an LRU. A buffer can only appear
1242 * once in a particular CPU's LRU. A single buffer can be present in multiple
1243 * CPU's LRUs at the same time.
1245 * This is a transparent caching front-end to sb_bread(), sb_getblk() and
1246 * sb_find_get_block().
1248 * The LRUs themselves only need locking against invalidate_bh_lrus. We use
1249 * a local interrupt disable for that.
1252 #define BH_LRU_SIZE 8
1255 struct buffer_head
*bhs
[BH_LRU_SIZE
];
1258 static DEFINE_PER_CPU(struct bh_lru
, bh_lrus
) = {{ NULL
}};
1261 #define bh_lru_lock() local_irq_disable()
1262 #define bh_lru_unlock() local_irq_enable()
1264 #define bh_lru_lock() preempt_disable()
1265 #define bh_lru_unlock() preempt_enable()
1268 static inline void check_irqs_on(void)
1270 #ifdef irqs_disabled
1271 BUG_ON(irqs_disabled());
1276 * The LRU management algorithm is dopey-but-simple. Sorry.
1278 static void bh_lru_install(struct buffer_head
*bh
)
1280 struct buffer_head
*evictee
= NULL
;
1285 lru
= &__get_cpu_var(bh_lrus
);
1286 if (lru
->bhs
[0] != bh
) {
1287 struct buffer_head
*bhs
[BH_LRU_SIZE
];
1293 for (in
= 0; in
< BH_LRU_SIZE
; in
++) {
1294 struct buffer_head
*bh2
= lru
->bhs
[in
];
1299 if (out
>= BH_LRU_SIZE
) {
1300 BUG_ON(evictee
!= NULL
);
1307 while (out
< BH_LRU_SIZE
)
1309 memcpy(lru
->bhs
, bhs
, sizeof(bhs
));
1318 * Look up the bh in this cpu's LRU. If it's there, move it to the head.
1320 static struct buffer_head
*
1321 lookup_bh_lru(struct block_device
*bdev
, sector_t block
, unsigned size
)
1323 struct buffer_head
*ret
= NULL
;
1329 lru
= &__get_cpu_var(bh_lrus
);
1330 for (i
= 0; i
< BH_LRU_SIZE
; i
++) {
1331 struct buffer_head
*bh
= lru
->bhs
[i
];
1333 if (bh
&& bh
->b_bdev
== bdev
&&
1334 bh
->b_blocknr
== block
&& bh
->b_size
== size
) {
1337 lru
->bhs
[i
] = lru
->bhs
[i
- 1];
1352 * Perform a pagecache lookup for the matching buffer. If it's there, refresh
1353 * it in the LRU and mark it as accessed. If it is not present then return
1356 struct buffer_head
*
1357 __find_get_block(struct block_device
*bdev
, sector_t block
, unsigned size
)
1359 struct buffer_head
*bh
= lookup_bh_lru(bdev
, block
, size
);
1362 bh
= __find_get_block_slow(bdev
, block
);
1370 EXPORT_SYMBOL(__find_get_block
);
1373 * __getblk will locate (and, if necessary, create) the buffer_head
1374 * which corresponds to the passed block_device, block and size. The
1375 * returned buffer has its reference count incremented.
1377 * __getblk() cannot fail - it just keeps trying. If you pass it an
1378 * illegal block number, __getblk() will happily return a buffer_head
1379 * which represents the non-existent block. Very weird.
1381 * __getblk() will lock up the machine if grow_dev_page's try_to_free_buffers()
1382 * attempt is failing. FIXME, perhaps?
1384 struct buffer_head
*
1385 __getblk(struct block_device
*bdev
, sector_t block
, unsigned size
)
1387 struct buffer_head
*bh
= __find_get_block(bdev
, block
, size
);
1391 bh
= __getblk_slow(bdev
, block
, size
);
1394 EXPORT_SYMBOL(__getblk
);
1397 * Do async read-ahead on a buffer..
1399 void __breadahead(struct block_device
*bdev
, sector_t block
, unsigned size
)
1401 struct buffer_head
*bh
= __getblk(bdev
, block
, size
);
1403 ll_rw_block(READA
, 1, &bh
);
1407 EXPORT_SYMBOL(__breadahead
);
1410 * __bread() - reads a specified block and returns the bh
1411 * @bdev: the block_device to read from
1412 * @block: number of block
1413 * @size: size (in bytes) to read
1415 * Reads a specified block, and returns buffer head that contains it.
1416 * It returns NULL if the block was unreadable.
1418 struct buffer_head
*
1419 __bread(struct block_device
*bdev
, sector_t block
, unsigned size
)
1421 struct buffer_head
*bh
= __getblk(bdev
, block
, size
);
1423 if (likely(bh
) && !buffer_uptodate(bh
))
1424 bh
= __bread_slow(bh
);
1427 EXPORT_SYMBOL(__bread
);
1430 * invalidate_bh_lrus() is called rarely - but not only at unmount.
1431 * This doesn't race because it runs in each cpu either in irq
1432 * or with preempt disabled.
1434 static void invalidate_bh_lru(void *arg
)
1436 struct bh_lru
*b
= &get_cpu_var(bh_lrus
);
1439 for (i
= 0; i
< BH_LRU_SIZE
; i
++) {
1443 put_cpu_var(bh_lrus
);
1446 void invalidate_bh_lrus(void)
1448 on_each_cpu(invalidate_bh_lru
, NULL
, 1);
1450 EXPORT_SYMBOL_GPL(invalidate_bh_lrus
);
1452 void set_bh_page(struct buffer_head
*bh
,
1453 struct page
*page
, unsigned long offset
)
1456 BUG_ON(offset
>= PAGE_SIZE
);
1457 if (PageHighMem(page
))
1459 * This catches illegal uses and preserves the offset:
1461 bh
->b_data
= (char *)(0 + offset
);
1463 bh
->b_data
= page_address(page
) + offset
;
1465 EXPORT_SYMBOL(set_bh_page
);
1468 * Called when truncating a buffer on a page completely.
1470 static void discard_buffer(struct buffer_head
* bh
)
1473 clear_buffer_dirty(bh
);
1475 clear_buffer_mapped(bh
);
1476 clear_buffer_req(bh
);
1477 clear_buffer_new(bh
);
1478 clear_buffer_delay(bh
);
1479 clear_buffer_unwritten(bh
);
1484 * block_invalidatepage - invalidate part of all of a buffer-backed page
1486 * @page: the page which is affected
1487 * @offset: the index of the truncation point
1489 * block_invalidatepage() is called when all or part of the page has become
1490 * invalidatedby a truncate operation.
1492 * block_invalidatepage() does not have to release all buffers, but it must
1493 * ensure that no dirty buffer is left outside @offset and that no I/O
1494 * is underway against any of the blocks which are outside the truncation
1495 * point. Because the caller is about to free (and possibly reuse) those
1498 void block_invalidatepage(struct page
*page
, unsigned long offset
)
1500 struct buffer_head
*head
, *bh
, *next
;
1501 unsigned int curr_off
= 0;
1503 BUG_ON(!PageLocked(page
));
1504 if (!page_has_buffers(page
))
1507 head
= page_buffers(page
);
1510 unsigned int next_off
= curr_off
+ bh
->b_size
;
1511 next
= bh
->b_this_page
;
1514 * is this block fully invalidated?
1516 if (offset
<= curr_off
)
1518 curr_off
= next_off
;
1520 } while (bh
!= head
);
1523 * We release buffers only if the entire page is being invalidated.
1524 * The get_block cached value has been unconditionally invalidated,
1525 * so real IO is not possible anymore.
1528 try_to_release_page(page
, 0);
1532 EXPORT_SYMBOL(block_invalidatepage
);
1535 * We attach and possibly dirty the buffers atomically wrt
1536 * __set_page_dirty_buffers() via private_lock. try_to_free_buffers
1537 * is already excluded via the page lock.
1539 void create_empty_buffers(struct page
*page
,
1540 unsigned long blocksize
, unsigned long b_state
)
1542 struct buffer_head
*bh
, *head
, *tail
;
1544 head
= alloc_page_buffers(page
, blocksize
, 1);
1547 bh
->b_state
|= b_state
;
1549 bh
= bh
->b_this_page
;
1551 tail
->b_this_page
= head
;
1553 spin_lock(&page
->mapping
->private_lock
);
1554 if (PageUptodate(page
) || PageDirty(page
)) {
1557 if (PageDirty(page
))
1558 set_buffer_dirty(bh
);
1559 if (PageUptodate(page
))
1560 set_buffer_uptodate(bh
);
1561 bh
= bh
->b_this_page
;
1562 } while (bh
!= head
);
1564 attach_page_buffers(page
, head
);
1565 spin_unlock(&page
->mapping
->private_lock
);
1567 EXPORT_SYMBOL(create_empty_buffers
);
1570 * We are taking a block for data and we don't want any output from any
1571 * buffer-cache aliases starting from return from that function and
1572 * until the moment when something will explicitly mark the buffer
1573 * dirty (hopefully that will not happen until we will free that block ;-)
1574 * We don't even need to mark it not-uptodate - nobody can expect
1575 * anything from a newly allocated buffer anyway. We used to used
1576 * unmap_buffer() for such invalidation, but that was wrong. We definitely
1577 * don't want to mark the alias unmapped, for example - it would confuse
1578 * anyone who might pick it with bread() afterwards...
1580 * Also.. Note that bforget() doesn't lock the buffer. So there can
1581 * be writeout I/O going on against recently-freed buffers. We don't
1582 * wait on that I/O in bforget() - it's more efficient to wait on the I/O
1583 * only if we really need to. That happens here.
1585 void unmap_underlying_metadata(struct block_device
*bdev
, sector_t block
)
1587 struct buffer_head
*old_bh
;
1591 old_bh
= __find_get_block_slow(bdev
, block
);
1593 clear_buffer_dirty(old_bh
);
1594 wait_on_buffer(old_bh
);
1595 clear_buffer_req(old_bh
);
1599 EXPORT_SYMBOL(unmap_underlying_metadata
);
1602 * NOTE! All mapped/uptodate combinations are valid:
1604 * Mapped Uptodate Meaning
1606 * No No "unknown" - must do get_block()
1607 * No Yes "hole" - zero-filled
1608 * Yes No "allocated" - allocated on disk, not read in
1609 * Yes Yes "valid" - allocated and up-to-date in memory.
1611 * "Dirty" is valid only with the last case (mapped+uptodate).
1615 * While block_write_full_page is writing back the dirty buffers under
1616 * the page lock, whoever dirtied the buffers may decide to clean them
1617 * again at any time. We handle that by only looking at the buffer
1618 * state inside lock_buffer().
1620 * If block_write_full_page() is called for regular writeback
1621 * (wbc->sync_mode == WB_SYNC_NONE) then it will redirty a page which has a
1622 * locked buffer. This only can happen if someone has written the buffer
1623 * directly, with submit_bh(). At the address_space level PageWriteback
1624 * prevents this contention from occurring.
1626 * If block_write_full_page() is called with wbc->sync_mode ==
1627 * WB_SYNC_ALL, the writes are posted using WRITE_SYNC_PLUG; this
1628 * causes the writes to be flagged as synchronous writes, but the
1629 * block device queue will NOT be unplugged, since usually many pages
1630 * will be pushed to the out before the higher-level caller actually
1631 * waits for the writes to be completed. The various wait functions,
1632 * such as wait_on_writeback_range() will ultimately call sync_page()
1633 * which will ultimately call blk_run_backing_dev(), which will end up
1634 * unplugging the device queue.
1636 static int __block_write_full_page(struct inode
*inode
, struct page
*page
,
1637 get_block_t
*get_block
, struct writeback_control
*wbc
,
1638 bh_end_io_t
*handler
)
1642 sector_t last_block
;
1643 struct buffer_head
*bh
, *head
;
1644 const unsigned blocksize
= 1 << inode
->i_blkbits
;
1645 int nr_underway
= 0;
1646 int write_op
= (wbc
->sync_mode
== WB_SYNC_ALL
?
1647 WRITE_SYNC_PLUG
: WRITE
);
1649 BUG_ON(!PageLocked(page
));
1651 last_block
= (i_size_read(inode
) - 1) >> inode
->i_blkbits
;
1653 if (!page_has_buffers(page
)) {
1654 create_empty_buffers(page
, blocksize
,
1655 (1 << BH_Dirty
)|(1 << BH_Uptodate
));
1659 * Be very careful. We have no exclusion from __set_page_dirty_buffers
1660 * here, and the (potentially unmapped) buffers may become dirty at
1661 * any time. If a buffer becomes dirty here after we've inspected it
1662 * then we just miss that fact, and the page stays dirty.
1664 * Buffers outside i_size may be dirtied by __set_page_dirty_buffers;
1665 * handle that here by just cleaning them.
1668 block
= (sector_t
)page
->index
<< (PAGE_CACHE_SHIFT
- inode
->i_blkbits
);
1669 head
= page_buffers(page
);
1673 * Get all the dirty buffers mapped to disk addresses and
1674 * handle any aliases from the underlying blockdev's mapping.
1677 if (block
> last_block
) {
1679 * mapped buffers outside i_size will occur, because
1680 * this page can be outside i_size when there is a
1681 * truncate in progress.
1684 * The buffer was zeroed by block_write_full_page()
1686 clear_buffer_dirty(bh
);
1687 set_buffer_uptodate(bh
);
1688 } else if ((!buffer_mapped(bh
) || buffer_delay(bh
)) &&
1690 WARN_ON(bh
->b_size
!= blocksize
);
1691 err
= get_block(inode
, block
, bh
, 1);
1694 clear_buffer_delay(bh
);
1695 if (buffer_new(bh
)) {
1696 /* blockdev mappings never come here */
1697 clear_buffer_new(bh
);
1698 unmap_underlying_metadata(bh
->b_bdev
,
1702 bh
= bh
->b_this_page
;
1704 } while (bh
!= head
);
1707 if (!buffer_mapped(bh
))
1710 * If it's a fully non-blocking write attempt and we cannot
1711 * lock the buffer then redirty the page. Note that this can
1712 * potentially cause a busy-wait loop from pdflush and kswapd
1713 * activity, but those code paths have their own higher-level
1716 if (wbc
->sync_mode
!= WB_SYNC_NONE
|| !wbc
->nonblocking
) {
1718 } else if (!trylock_buffer(bh
)) {
1719 redirty_page_for_writepage(wbc
, page
);
1722 if (test_clear_buffer_dirty(bh
)) {
1723 mark_buffer_async_write_endio(bh
, handler
);
1727 } while ((bh
= bh
->b_this_page
) != head
);
1730 * The page and its buffers are protected by PageWriteback(), so we can
1731 * drop the bh refcounts early.
1733 BUG_ON(PageWriteback(page
));
1734 set_page_writeback(page
);
1737 struct buffer_head
*next
= bh
->b_this_page
;
1738 if (buffer_async_write(bh
)) {
1739 submit_bh(write_op
, bh
);
1743 } while (bh
!= head
);
1748 if (nr_underway
== 0) {
1750 * The page was marked dirty, but the buffers were
1751 * clean. Someone wrote them back by hand with
1752 * ll_rw_block/submit_bh. A rare case.
1754 end_page_writeback(page
);
1757 * The page and buffer_heads can be released at any time from
1765 * ENOSPC, or some other error. We may already have added some
1766 * blocks to the file, so we need to write these out to avoid
1767 * exposing stale data.
1768 * The page is currently locked and not marked for writeback
1771 /* Recovery: lock and submit the mapped buffers */
1773 if (buffer_mapped(bh
) && buffer_dirty(bh
) &&
1774 !buffer_delay(bh
)) {
1776 mark_buffer_async_write_endio(bh
, handler
);
1779 * The buffer may have been set dirty during
1780 * attachment to a dirty page.
1782 clear_buffer_dirty(bh
);
1784 } while ((bh
= bh
->b_this_page
) != head
);
1786 BUG_ON(PageWriteback(page
));
1787 mapping_set_error(page
->mapping
, err
);
1788 set_page_writeback(page
);
1790 struct buffer_head
*next
= bh
->b_this_page
;
1791 if (buffer_async_write(bh
)) {
1792 clear_buffer_dirty(bh
);
1793 submit_bh(write_op
, bh
);
1797 } while (bh
!= head
);
1803 * If a page has any new buffers, zero them out here, and mark them uptodate
1804 * and dirty so they'll be written out (in order to prevent uninitialised
1805 * block data from leaking). And clear the new bit.
1807 void page_zero_new_buffers(struct page
*page
, unsigned from
, unsigned to
)
1809 unsigned int block_start
, block_end
;
1810 struct buffer_head
*head
, *bh
;
1812 BUG_ON(!PageLocked(page
));
1813 if (!page_has_buffers(page
))
1816 bh
= head
= page_buffers(page
);
1819 block_end
= block_start
+ bh
->b_size
;
1821 if (buffer_new(bh
)) {
1822 if (block_end
> from
&& block_start
< to
) {
1823 if (!PageUptodate(page
)) {
1824 unsigned start
, size
;
1826 start
= max(from
, block_start
);
1827 size
= min(to
, block_end
) - start
;
1829 zero_user(page
, start
, size
);
1830 set_buffer_uptodate(bh
);
1833 clear_buffer_new(bh
);
1834 mark_buffer_dirty(bh
);
1838 block_start
= block_end
;
1839 bh
= bh
->b_this_page
;
1840 } while (bh
!= head
);
1842 EXPORT_SYMBOL(page_zero_new_buffers
);
1844 static int __block_prepare_write(struct inode
*inode
, struct page
*page
,
1845 unsigned from
, unsigned to
, get_block_t
*get_block
)
1847 unsigned block_start
, block_end
;
1850 unsigned blocksize
, bbits
;
1851 struct buffer_head
*bh
, *head
, *wait
[2], **wait_bh
=wait
;
1853 BUG_ON(!PageLocked(page
));
1854 BUG_ON(from
> PAGE_CACHE_SIZE
);
1855 BUG_ON(to
> PAGE_CACHE_SIZE
);
1858 blocksize
= 1 << inode
->i_blkbits
;
1859 if (!page_has_buffers(page
))
1860 create_empty_buffers(page
, blocksize
, 0);
1861 head
= page_buffers(page
);
1863 bbits
= inode
->i_blkbits
;
1864 block
= (sector_t
)page
->index
<< (PAGE_CACHE_SHIFT
- bbits
);
1866 for(bh
= head
, block_start
= 0; bh
!= head
|| !block_start
;
1867 block
++, block_start
=block_end
, bh
= bh
->b_this_page
) {
1868 block_end
= block_start
+ blocksize
;
1869 if (block_end
<= from
|| block_start
>= to
) {
1870 if (PageUptodate(page
)) {
1871 if (!buffer_uptodate(bh
))
1872 set_buffer_uptodate(bh
);
1877 clear_buffer_new(bh
);
1878 if (!buffer_mapped(bh
)) {
1879 WARN_ON(bh
->b_size
!= blocksize
);
1880 err
= get_block(inode
, block
, bh
, 1);
1883 if (buffer_new(bh
)) {
1884 unmap_underlying_metadata(bh
->b_bdev
,
1886 if (PageUptodate(page
)) {
1887 clear_buffer_new(bh
);
1888 set_buffer_uptodate(bh
);
1889 mark_buffer_dirty(bh
);
1892 if (block_end
> to
|| block_start
< from
)
1893 zero_user_segments(page
,
1899 if (PageUptodate(page
)) {
1900 if (!buffer_uptodate(bh
))
1901 set_buffer_uptodate(bh
);
1904 if (!buffer_uptodate(bh
) && !buffer_delay(bh
) &&
1905 !buffer_unwritten(bh
) &&
1906 (block_start
< from
|| block_end
> to
)) {
1907 ll_rw_block(READ
, 1, &bh
);
1912 * If we issued read requests - let them complete.
1914 while(wait_bh
> wait
) {
1915 wait_on_buffer(*--wait_bh
);
1916 if (!buffer_uptodate(*wait_bh
))
1920 page_zero_new_buffers(page
, from
, to
);
1924 static int __block_commit_write(struct inode
*inode
, struct page
*page
,
1925 unsigned from
, unsigned to
)
1927 unsigned block_start
, block_end
;
1930 struct buffer_head
*bh
, *head
;
1932 blocksize
= 1 << inode
->i_blkbits
;
1934 for(bh
= head
= page_buffers(page
), block_start
= 0;
1935 bh
!= head
|| !block_start
;
1936 block_start
=block_end
, bh
= bh
->b_this_page
) {
1937 block_end
= block_start
+ blocksize
;
1938 if (block_end
<= from
|| block_start
>= to
) {
1939 if (!buffer_uptodate(bh
))
1942 set_buffer_uptodate(bh
);
1943 mark_buffer_dirty(bh
);
1945 clear_buffer_new(bh
);
1949 * If this is a partial write which happened to make all buffers
1950 * uptodate then we can optimize away a bogus readpage() for
1951 * the next read(). Here we 'discover' whether the page went
1952 * uptodate as a result of this (potentially partial) write.
1955 SetPageUptodate(page
);
1960 * block_write_begin takes care of the basic task of block allocation and
1961 * bringing partial write blocks uptodate first.
1963 * If *pagep is not NULL, then block_write_begin uses the locked page
1964 * at *pagep rather than allocating its own. In this case, the page will
1965 * not be unlocked or deallocated on failure.
1967 int block_write_begin(struct file
*file
, struct address_space
*mapping
,
1968 loff_t pos
, unsigned len
, unsigned flags
,
1969 struct page
**pagep
, void **fsdata
,
1970 get_block_t
*get_block
)
1972 struct inode
*inode
= mapping
->host
;
1976 unsigned start
, end
;
1979 index
= pos
>> PAGE_CACHE_SHIFT
;
1980 start
= pos
& (PAGE_CACHE_SIZE
- 1);
1986 page
= grab_cache_page_write_begin(mapping
, index
, flags
);
1993 BUG_ON(!PageLocked(page
));
1995 status
= __block_prepare_write(inode
, page
, start
, end
, get_block
);
1996 if (unlikely(status
)) {
1997 ClearPageUptodate(page
);
2001 page_cache_release(page
);
2005 * prepare_write() may have instantiated a few blocks
2006 * outside i_size. Trim these off again. Don't need
2007 * i_size_read because we hold i_mutex.
2009 if (pos
+ len
> inode
->i_size
)
2010 vmtruncate(inode
, inode
->i_size
);
2017 EXPORT_SYMBOL(block_write_begin
);
2019 int block_write_end(struct file
*file
, struct address_space
*mapping
,
2020 loff_t pos
, unsigned len
, unsigned copied
,
2021 struct page
*page
, void *fsdata
)
2023 struct inode
*inode
= mapping
->host
;
2026 start
= pos
& (PAGE_CACHE_SIZE
- 1);
2028 if (unlikely(copied
< len
)) {
2030 * The buffers that were written will now be uptodate, so we
2031 * don't have to worry about a readpage reading them and
2032 * overwriting a partial write. However if we have encountered
2033 * a short write and only partially written into a buffer, it
2034 * will not be marked uptodate, so a readpage might come in and
2035 * destroy our partial write.
2037 * Do the simplest thing, and just treat any short write to a
2038 * non uptodate page as a zero-length write, and force the
2039 * caller to redo the whole thing.
2041 if (!PageUptodate(page
))
2044 page_zero_new_buffers(page
, start
+copied
, start
+len
);
2046 flush_dcache_page(page
);
2048 /* This could be a short (even 0-length) commit */
2049 __block_commit_write(inode
, page
, start
, start
+copied
);
2053 EXPORT_SYMBOL(block_write_end
);
2055 int generic_write_end(struct file
*file
, struct address_space
*mapping
,
2056 loff_t pos
, unsigned len
, unsigned copied
,
2057 struct page
*page
, void *fsdata
)
2059 struct inode
*inode
= mapping
->host
;
2060 int i_size_changed
= 0;
2062 copied
= block_write_end(file
, mapping
, pos
, len
, copied
, page
, fsdata
);
2065 * No need to use i_size_read() here, the i_size
2066 * cannot change under us because we hold i_mutex.
2068 * But it's important to update i_size while still holding page lock:
2069 * page writeout could otherwise come in and zero beyond i_size.
2071 if (pos
+copied
> inode
->i_size
) {
2072 i_size_write(inode
, pos
+copied
);
2077 page_cache_release(page
);
2080 * Don't mark the inode dirty under page lock. First, it unnecessarily
2081 * makes the holding time of page lock longer. Second, it forces lock
2082 * ordering of page lock and transaction start for journaling
2086 mark_inode_dirty(inode
);
2090 EXPORT_SYMBOL(generic_write_end
);
2093 * block_is_partially_uptodate checks whether buffers within a page are
2096 * Returns true if all buffers which correspond to a file portion
2097 * we want to read are uptodate.
2099 int block_is_partially_uptodate(struct page
*page
, read_descriptor_t
*desc
,
2102 struct inode
*inode
= page
->mapping
->host
;
2103 unsigned block_start
, block_end
, blocksize
;
2105 struct buffer_head
*bh
, *head
;
2108 if (!page_has_buffers(page
))
2111 blocksize
= 1 << inode
->i_blkbits
;
2112 to
= min_t(unsigned, PAGE_CACHE_SIZE
- from
, desc
->count
);
2114 if (from
< blocksize
&& to
> PAGE_CACHE_SIZE
- blocksize
)
2117 head
= page_buffers(page
);
2121 block_end
= block_start
+ blocksize
;
2122 if (block_end
> from
&& block_start
< to
) {
2123 if (!buffer_uptodate(bh
)) {
2127 if (block_end
>= to
)
2130 block_start
= block_end
;
2131 bh
= bh
->b_this_page
;
2132 } while (bh
!= head
);
2136 EXPORT_SYMBOL(block_is_partially_uptodate
);
2139 * Generic "read page" function for block devices that have the normal
2140 * get_block functionality. This is most of the block device filesystems.
2141 * Reads the page asynchronously --- the unlock_buffer() and
2142 * set/clear_buffer_uptodate() functions propagate buffer state into the
2143 * page struct once IO has completed.
2145 int block_read_full_page(struct page
*page
, get_block_t
*get_block
)
2147 struct inode
*inode
= page
->mapping
->host
;
2148 sector_t iblock
, lblock
;
2149 struct buffer_head
*bh
, *head
, *arr
[MAX_BUF_PER_PAGE
];
2150 unsigned int blocksize
;
2152 int fully_mapped
= 1;
2154 BUG_ON(!PageLocked(page
));
2155 blocksize
= 1 << inode
->i_blkbits
;
2156 if (!page_has_buffers(page
))
2157 create_empty_buffers(page
, blocksize
, 0);
2158 head
= page_buffers(page
);
2160 iblock
= (sector_t
)page
->index
<< (PAGE_CACHE_SHIFT
- inode
->i_blkbits
);
2161 lblock
= (i_size_read(inode
)+blocksize
-1) >> inode
->i_blkbits
;
2167 if (buffer_uptodate(bh
))
2170 if (!buffer_mapped(bh
)) {
2174 if (iblock
< lblock
) {
2175 WARN_ON(bh
->b_size
!= blocksize
);
2176 err
= get_block(inode
, iblock
, bh
, 0);
2180 if (!buffer_mapped(bh
)) {
2181 zero_user(page
, i
* blocksize
, blocksize
);
2183 set_buffer_uptodate(bh
);
2187 * get_block() might have updated the buffer
2190 if (buffer_uptodate(bh
))
2194 } while (i
++, iblock
++, (bh
= bh
->b_this_page
) != head
);
2197 SetPageMappedToDisk(page
);
2201 * All buffers are uptodate - we can set the page uptodate
2202 * as well. But not if get_block() returned an error.
2204 if (!PageError(page
))
2205 SetPageUptodate(page
);
2210 /* Stage two: lock the buffers */
2211 for (i
= 0; i
< nr
; i
++) {
2214 mark_buffer_async_read(bh
);
2218 * Stage 3: start the IO. Check for uptodateness
2219 * inside the buffer lock in case another process reading
2220 * the underlying blockdev brought it uptodate (the sct fix).
2222 for (i
= 0; i
< nr
; i
++) {
2224 if (buffer_uptodate(bh
))
2225 end_buffer_async_read(bh
, 1);
2227 submit_bh(READ
, bh
);
2231 EXPORT_SYMBOL(block_read_full_page
);
2233 /* utility function for filesystems that need to do work on expanding
2234 * truncates. Uses filesystem pagecache writes to allow the filesystem to
2235 * deal with the hole.
2237 int generic_cont_expand_simple(struct inode
*inode
, loff_t size
)
2239 struct address_space
*mapping
= inode
->i_mapping
;
2242 unsigned long limit
;
2246 limit
= current
->signal
->rlim
[RLIMIT_FSIZE
].rlim_cur
;
2247 if (limit
!= RLIM_INFINITY
&& size
> (loff_t
)limit
) {
2248 send_sig(SIGXFSZ
, current
, 0);
2251 if (size
> inode
->i_sb
->s_maxbytes
)
2254 err
= pagecache_write_begin(NULL
, mapping
, size
, 0,
2255 AOP_FLAG_UNINTERRUPTIBLE
|AOP_FLAG_CONT_EXPAND
,
2260 err
= pagecache_write_end(NULL
, mapping
, size
, 0, 0, page
, fsdata
);
2266 EXPORT_SYMBOL(generic_cont_expand_simple
);
2268 static int cont_expand_zero(struct file
*file
, struct address_space
*mapping
,
2269 loff_t pos
, loff_t
*bytes
)
2271 struct inode
*inode
= mapping
->host
;
2272 unsigned blocksize
= 1 << inode
->i_blkbits
;
2275 pgoff_t index
, curidx
;
2277 unsigned zerofrom
, offset
, len
;
2280 index
= pos
>> PAGE_CACHE_SHIFT
;
2281 offset
= pos
& ~PAGE_CACHE_MASK
;
2283 while (index
> (curidx
= (curpos
= *bytes
)>>PAGE_CACHE_SHIFT
)) {
2284 zerofrom
= curpos
& ~PAGE_CACHE_MASK
;
2285 if (zerofrom
& (blocksize
-1)) {
2286 *bytes
|= (blocksize
-1);
2289 len
= PAGE_CACHE_SIZE
- zerofrom
;
2291 err
= pagecache_write_begin(file
, mapping
, curpos
, len
,
2292 AOP_FLAG_UNINTERRUPTIBLE
,
2296 zero_user(page
, zerofrom
, len
);
2297 err
= pagecache_write_end(file
, mapping
, curpos
, len
, len
,
2304 balance_dirty_pages_ratelimited(mapping
);
2307 /* page covers the boundary, find the boundary offset */
2308 if (index
== curidx
) {
2309 zerofrom
= curpos
& ~PAGE_CACHE_MASK
;
2310 /* if we will expand the thing last block will be filled */
2311 if (offset
<= zerofrom
) {
2314 if (zerofrom
& (blocksize
-1)) {
2315 *bytes
|= (blocksize
-1);
2318 len
= offset
- zerofrom
;
2320 err
= pagecache_write_begin(file
, mapping
, curpos
, len
,
2321 AOP_FLAG_UNINTERRUPTIBLE
,
2325 zero_user(page
, zerofrom
, len
);
2326 err
= pagecache_write_end(file
, mapping
, curpos
, len
, len
,
2338 * For moronic filesystems that do not allow holes in file.
2339 * We may have to extend the file.
2341 int cont_write_begin(struct file
*file
, struct address_space
*mapping
,
2342 loff_t pos
, unsigned len
, unsigned flags
,
2343 struct page
**pagep
, void **fsdata
,
2344 get_block_t
*get_block
, loff_t
*bytes
)
2346 struct inode
*inode
= mapping
->host
;
2347 unsigned blocksize
= 1 << inode
->i_blkbits
;
2351 err
= cont_expand_zero(file
, mapping
, pos
, bytes
);
2355 zerofrom
= *bytes
& ~PAGE_CACHE_MASK
;
2356 if (pos
+len
> *bytes
&& zerofrom
& (blocksize
-1)) {
2357 *bytes
|= (blocksize
-1);
2362 err
= block_write_begin(file
, mapping
, pos
, len
,
2363 flags
, pagep
, fsdata
, get_block
);
2367 EXPORT_SYMBOL(cont_write_begin
);
2369 int block_prepare_write(struct page
*page
, unsigned from
, unsigned to
,
2370 get_block_t
*get_block
)
2372 struct inode
*inode
= page
->mapping
->host
;
2373 int err
= __block_prepare_write(inode
, page
, from
, to
, get_block
);
2375 ClearPageUptodate(page
);
2378 EXPORT_SYMBOL(block_prepare_write
);
2380 int block_commit_write(struct page
*page
, unsigned from
, unsigned to
)
2382 struct inode
*inode
= page
->mapping
->host
;
2383 __block_commit_write(inode
,page
,from
,to
);
2386 EXPORT_SYMBOL(block_commit_write
);
2389 * block_page_mkwrite() is not allowed to change the file size as it gets
2390 * called from a page fault handler when a page is first dirtied. Hence we must
2391 * be careful to check for EOF conditions here. We set the page up correctly
2392 * for a written page which means we get ENOSPC checking when writing into
2393 * holes and correct delalloc and unwritten extent mapping on filesystems that
2394 * support these features.
2396 * We are not allowed to take the i_mutex here so we have to play games to
2397 * protect against truncate races as the page could now be beyond EOF. Because
2398 * vmtruncate() writes the inode size before removing pages, once we have the
2399 * page lock we can determine safely if the page is beyond EOF. If it is not
2400 * beyond EOF, then the page is guaranteed safe against truncation until we
2404 block_page_mkwrite(struct vm_area_struct
*vma
, struct vm_fault
*vmf
,
2405 get_block_t get_block
)
2407 struct page
*page
= vmf
->page
;
2408 struct inode
*inode
= vma
->vm_file
->f_path
.dentry
->d_inode
;
2411 int ret
= VM_FAULT_NOPAGE
; /* make the VM retry the fault */
2414 size
= i_size_read(inode
);
2415 if ((page
->mapping
!= inode
->i_mapping
) ||
2416 (page_offset(page
) > size
)) {
2417 /* page got truncated out from underneath us */
2422 /* page is wholly or partially inside EOF */
2423 if (((page
->index
+ 1) << PAGE_CACHE_SHIFT
) > size
)
2424 end
= size
& ~PAGE_CACHE_MASK
;
2426 end
= PAGE_CACHE_SIZE
;
2428 ret
= block_prepare_write(page
, 0, end
, get_block
);
2430 ret
= block_commit_write(page
, 0, end
);
2432 if (unlikely(ret
)) {
2436 else /* -ENOSPC, -EIO, etc */
2437 ret
= VM_FAULT_SIGBUS
;
2439 ret
= VM_FAULT_LOCKED
;
2444 EXPORT_SYMBOL(block_page_mkwrite
);
2447 * nobh_write_begin()'s prereads are special: the buffer_heads are freed
2448 * immediately, while under the page lock. So it needs a special end_io
2449 * handler which does not touch the bh after unlocking it.
2451 static void end_buffer_read_nobh(struct buffer_head
*bh
, int uptodate
)
2453 __end_buffer_read_notouch(bh
, uptodate
);
2457 * Attach the singly-linked list of buffers created by nobh_write_begin, to
2458 * the page (converting it to circular linked list and taking care of page
2461 static void attach_nobh_buffers(struct page
*page
, struct buffer_head
*head
)
2463 struct buffer_head
*bh
;
2465 BUG_ON(!PageLocked(page
));
2467 spin_lock(&page
->mapping
->private_lock
);
2470 if (PageDirty(page
))
2471 set_buffer_dirty(bh
);
2472 if (!bh
->b_this_page
)
2473 bh
->b_this_page
= head
;
2474 bh
= bh
->b_this_page
;
2475 } while (bh
!= head
);
2476 attach_page_buffers(page
, head
);
2477 spin_unlock(&page
->mapping
->private_lock
);
2481 * On entry, the page is fully not uptodate.
2482 * On exit the page is fully uptodate in the areas outside (from,to)
2484 int nobh_write_begin(struct file
*file
, struct address_space
*mapping
,
2485 loff_t pos
, unsigned len
, unsigned flags
,
2486 struct page
**pagep
, void **fsdata
,
2487 get_block_t
*get_block
)
2489 struct inode
*inode
= mapping
->host
;
2490 const unsigned blkbits
= inode
->i_blkbits
;
2491 const unsigned blocksize
= 1 << blkbits
;
2492 struct buffer_head
*head
, *bh
;
2496 unsigned block_in_page
;
2497 unsigned block_start
, block_end
;
2498 sector_t block_in_file
;
2501 int is_mapped_to_disk
= 1;
2503 index
= pos
>> PAGE_CACHE_SHIFT
;
2504 from
= pos
& (PAGE_CACHE_SIZE
- 1);
2507 page
= grab_cache_page_write_begin(mapping
, index
, flags
);
2513 if (page_has_buffers(page
)) {
2515 page_cache_release(page
);
2517 return block_write_begin(file
, mapping
, pos
, len
, flags
, pagep
,
2521 if (PageMappedToDisk(page
))
2525 * Allocate buffers so that we can keep track of state, and potentially
2526 * attach them to the page if an error occurs. In the common case of
2527 * no error, they will just be freed again without ever being attached
2528 * to the page (which is all OK, because we're under the page lock).
2530 * Be careful: the buffer linked list is a NULL terminated one, rather
2531 * than the circular one we're used to.
2533 head
= alloc_page_buffers(page
, blocksize
, 0);
2539 block_in_file
= (sector_t
)page
->index
<< (PAGE_CACHE_SHIFT
- blkbits
);
2542 * We loop across all blocks in the page, whether or not they are
2543 * part of the affected region. This is so we can discover if the
2544 * page is fully mapped-to-disk.
2546 for (block_start
= 0, block_in_page
= 0, bh
= head
;
2547 block_start
< PAGE_CACHE_SIZE
;
2548 block_in_page
++, block_start
+= blocksize
, bh
= bh
->b_this_page
) {
2551 block_end
= block_start
+ blocksize
;
2554 if (block_start
>= to
)
2556 ret
= get_block(inode
, block_in_file
+ block_in_page
,
2560 if (!buffer_mapped(bh
))
2561 is_mapped_to_disk
= 0;
2563 unmap_underlying_metadata(bh
->b_bdev
, bh
->b_blocknr
);
2564 if (PageUptodate(page
)) {
2565 set_buffer_uptodate(bh
);
2568 if (buffer_new(bh
) || !buffer_mapped(bh
)) {
2569 zero_user_segments(page
, block_start
, from
,
2573 if (buffer_uptodate(bh
))
2574 continue; /* reiserfs does this */
2575 if (block_start
< from
|| block_end
> to
) {
2577 bh
->b_end_io
= end_buffer_read_nobh
;
2578 submit_bh(READ
, bh
);
2585 * The page is locked, so these buffers are protected from
2586 * any VM or truncate activity. Hence we don't need to care
2587 * for the buffer_head refcounts.
2589 for (bh
= head
; bh
; bh
= bh
->b_this_page
) {
2591 if (!buffer_uptodate(bh
))
2598 if (is_mapped_to_disk
)
2599 SetPageMappedToDisk(page
);
2601 *fsdata
= head
; /* to be released by nobh_write_end */
2608 * Error recovery is a bit difficult. We need to zero out blocks that
2609 * were newly allocated, and dirty them to ensure they get written out.
2610 * Buffers need to be attached to the page at this point, otherwise
2611 * the handling of potential IO errors during writeout would be hard
2612 * (could try doing synchronous writeout, but what if that fails too?)
2614 attach_nobh_buffers(page
, head
);
2615 page_zero_new_buffers(page
, from
, to
);
2619 page_cache_release(page
);
2622 if (pos
+ len
> inode
->i_size
)
2623 vmtruncate(inode
, inode
->i_size
);
2627 EXPORT_SYMBOL(nobh_write_begin
);
2629 int nobh_write_end(struct file
*file
, struct address_space
*mapping
,
2630 loff_t pos
, unsigned len
, unsigned copied
,
2631 struct page
*page
, void *fsdata
)
2633 struct inode
*inode
= page
->mapping
->host
;
2634 struct buffer_head
*head
= fsdata
;
2635 struct buffer_head
*bh
;
2636 BUG_ON(fsdata
!= NULL
&& page_has_buffers(page
));
2638 if (unlikely(copied
< len
) && head
)
2639 attach_nobh_buffers(page
, head
);
2640 if (page_has_buffers(page
))
2641 return generic_write_end(file
, mapping
, pos
, len
,
2642 copied
, page
, fsdata
);
2644 SetPageUptodate(page
);
2645 set_page_dirty(page
);
2646 if (pos
+copied
> inode
->i_size
) {
2647 i_size_write(inode
, pos
+copied
);
2648 mark_inode_dirty(inode
);
2652 page_cache_release(page
);
2656 head
= head
->b_this_page
;
2657 free_buffer_head(bh
);
2662 EXPORT_SYMBOL(nobh_write_end
);
2665 * nobh_writepage() - based on block_full_write_page() except
2666 * that it tries to operate without attaching bufferheads to
2669 int nobh_writepage(struct page
*page
, get_block_t
*get_block
,
2670 struct writeback_control
*wbc
)
2672 struct inode
* const inode
= page
->mapping
->host
;
2673 loff_t i_size
= i_size_read(inode
);
2674 const pgoff_t end_index
= i_size
>> PAGE_CACHE_SHIFT
;
2678 /* Is the page fully inside i_size? */
2679 if (page
->index
< end_index
)
2682 /* Is the page fully outside i_size? (truncate in progress) */
2683 offset
= i_size
& (PAGE_CACHE_SIZE
-1);
2684 if (page
->index
>= end_index
+1 || !offset
) {
2686 * The page may have dirty, unmapped buffers. For example,
2687 * they may have been added in ext3_writepage(). Make them
2688 * freeable here, so the page does not leak.
2691 /* Not really sure about this - do we need this ? */
2692 if (page
->mapping
->a_ops
->invalidatepage
)
2693 page
->mapping
->a_ops
->invalidatepage(page
, offset
);
2696 return 0; /* don't care */
2700 * The page straddles i_size. It must be zeroed out on each and every
2701 * writepage invocation because it may be mmapped. "A file is mapped
2702 * in multiples of the page size. For a file that is not a multiple of
2703 * the page size, the remaining memory is zeroed when mapped, and
2704 * writes to that region are not written out to the file."
2706 zero_user_segment(page
, offset
, PAGE_CACHE_SIZE
);
2708 ret
= mpage_writepage(page
, get_block
, wbc
);
2710 ret
= __block_write_full_page(inode
, page
, get_block
, wbc
,
2711 end_buffer_async_write
);
2714 EXPORT_SYMBOL(nobh_writepage
);
2716 int nobh_truncate_page(struct address_space
*mapping
,
2717 loff_t from
, get_block_t
*get_block
)
2719 pgoff_t index
= from
>> PAGE_CACHE_SHIFT
;
2720 unsigned offset
= from
& (PAGE_CACHE_SIZE
-1);
2723 unsigned length
, pos
;
2724 struct inode
*inode
= mapping
->host
;
2726 struct buffer_head map_bh
;
2729 blocksize
= 1 << inode
->i_blkbits
;
2730 length
= offset
& (blocksize
- 1);
2732 /* Block boundary? Nothing to do */
2736 length
= blocksize
- length
;
2737 iblock
= (sector_t
)index
<< (PAGE_CACHE_SHIFT
- inode
->i_blkbits
);
2739 page
= grab_cache_page(mapping
, index
);
2744 if (page_has_buffers(page
)) {
2747 page_cache_release(page
);
2748 return block_truncate_page(mapping
, from
, get_block
);
2751 /* Find the buffer that contains "offset" */
2753 while (offset
>= pos
) {
2758 map_bh
.b_size
= blocksize
;
2760 err
= get_block(inode
, iblock
, &map_bh
, 0);
2763 /* unmapped? It's a hole - nothing to do */
2764 if (!buffer_mapped(&map_bh
))
2767 /* Ok, it's mapped. Make sure it's up-to-date */
2768 if (!PageUptodate(page
)) {
2769 err
= mapping
->a_ops
->readpage(NULL
, page
);
2771 page_cache_release(page
);
2775 if (!PageUptodate(page
)) {
2779 if (page_has_buffers(page
))
2782 zero_user(page
, offset
, length
);
2783 set_page_dirty(page
);
2788 page_cache_release(page
);
2792 EXPORT_SYMBOL(nobh_truncate_page
);
2794 int block_truncate_page(struct address_space
*mapping
,
2795 loff_t from
, get_block_t
*get_block
)
2797 pgoff_t index
= from
>> PAGE_CACHE_SHIFT
;
2798 unsigned offset
= from
& (PAGE_CACHE_SIZE
-1);
2801 unsigned length
, pos
;
2802 struct inode
*inode
= mapping
->host
;
2804 struct buffer_head
*bh
;
2807 blocksize
= 1 << inode
->i_blkbits
;
2808 length
= offset
& (blocksize
- 1);
2810 /* Block boundary? Nothing to do */
2814 length
= blocksize
- length
;
2815 iblock
= (sector_t
)index
<< (PAGE_CACHE_SHIFT
- inode
->i_blkbits
);
2817 page
= grab_cache_page(mapping
, index
);
2822 if (!page_has_buffers(page
))
2823 create_empty_buffers(page
, blocksize
, 0);
2825 /* Find the buffer that contains "offset" */
2826 bh
= page_buffers(page
);
2828 while (offset
>= pos
) {
2829 bh
= bh
->b_this_page
;
2835 if (!buffer_mapped(bh
)) {
2836 WARN_ON(bh
->b_size
!= blocksize
);
2837 err
= get_block(inode
, iblock
, bh
, 0);
2840 /* unmapped? It's a hole - nothing to do */
2841 if (!buffer_mapped(bh
))
2845 /* Ok, it's mapped. Make sure it's up-to-date */
2846 if (PageUptodate(page
))
2847 set_buffer_uptodate(bh
);
2849 if (!buffer_uptodate(bh
) && !buffer_delay(bh
) && !buffer_unwritten(bh
)) {
2851 ll_rw_block(READ
, 1, &bh
);
2853 /* Uhhuh. Read error. Complain and punt. */
2854 if (!buffer_uptodate(bh
))
2858 zero_user(page
, offset
, length
);
2859 mark_buffer_dirty(bh
);
2864 page_cache_release(page
);
2868 EXPORT_SYMBOL(block_truncate_page
);
2871 * The generic ->writepage function for buffer-backed address_spaces
2872 * this form passes in the end_io handler used to finish the IO.
2874 int block_write_full_page_endio(struct page
*page
, get_block_t
*get_block
,
2875 struct writeback_control
*wbc
, bh_end_io_t
*handler
)
2877 struct inode
* const inode
= page
->mapping
->host
;
2878 loff_t i_size
= i_size_read(inode
);
2879 const pgoff_t end_index
= i_size
>> PAGE_CACHE_SHIFT
;
2882 /* Is the page fully inside i_size? */
2883 if (page
->index
< end_index
)
2884 return __block_write_full_page(inode
, page
, get_block
, wbc
,
2887 /* Is the page fully outside i_size? (truncate in progress) */
2888 offset
= i_size
& (PAGE_CACHE_SIZE
-1);
2889 if (page
->index
>= end_index
+1 || !offset
) {
2891 * The page may have dirty, unmapped buffers. For example,
2892 * they may have been added in ext3_writepage(). Make them
2893 * freeable here, so the page does not leak.
2895 do_invalidatepage(page
, 0);
2897 return 0; /* don't care */
2901 * The page straddles i_size. It must be zeroed out on each and every
2902 * writepage invokation because it may be mmapped. "A file is mapped
2903 * in multiples of the page size. For a file that is not a multiple of
2904 * the page size, the remaining memory is zeroed when mapped, and
2905 * writes to that region are not written out to the file."
2907 zero_user_segment(page
, offset
, PAGE_CACHE_SIZE
);
2908 return __block_write_full_page(inode
, page
, get_block
, wbc
, handler
);
2910 EXPORT_SYMBOL(block_write_full_page_endio
);
2913 * The generic ->writepage function for buffer-backed address_spaces
2915 int block_write_full_page(struct page
*page
, get_block_t
*get_block
,
2916 struct writeback_control
*wbc
)
2918 return block_write_full_page_endio(page
, get_block
, wbc
,
2919 end_buffer_async_write
);
2921 EXPORT_SYMBOL(block_write_full_page
);
2923 sector_t
generic_block_bmap(struct address_space
*mapping
, sector_t block
,
2924 get_block_t
*get_block
)
2926 struct buffer_head tmp
;
2927 struct inode
*inode
= mapping
->host
;
2930 tmp
.b_size
= 1 << inode
->i_blkbits
;
2931 get_block(inode
, block
, &tmp
, 0);
2932 return tmp
.b_blocknr
;
2934 EXPORT_SYMBOL(generic_block_bmap
);
2936 static void end_bio_bh_io_sync(struct bio
*bio
, int err
)
2938 struct buffer_head
*bh
= bio
->bi_private
;
2940 if (err
== -EOPNOTSUPP
) {
2941 set_bit(BIO_EOPNOTSUPP
, &bio
->bi_flags
);
2942 set_bit(BH_Eopnotsupp
, &bh
->b_state
);
2945 if (unlikely (test_bit(BIO_QUIET
,&bio
->bi_flags
)))
2946 set_bit(BH_Quiet
, &bh
->b_state
);
2948 bh
->b_end_io(bh
, test_bit(BIO_UPTODATE
, &bio
->bi_flags
));
2952 int submit_bh(int rw
, struct buffer_head
* bh
)
2957 BUG_ON(!buffer_locked(bh
));
2958 BUG_ON(!buffer_mapped(bh
));
2959 BUG_ON(!bh
->b_end_io
);
2960 BUG_ON(buffer_delay(bh
));
2961 BUG_ON(buffer_unwritten(bh
));
2964 * Mask in barrier bit for a write (could be either a WRITE or a
2967 if (buffer_ordered(bh
) && (rw
& WRITE
))
2968 rw
|= WRITE_BARRIER
;
2971 * Only clear out a write error when rewriting
2973 if (test_set_buffer_req(bh
) && (rw
& WRITE
))
2974 clear_buffer_write_io_error(bh
);
2977 * from here on down, it's all bio -- do the initial mapping,
2978 * submit_bio -> generic_make_request may further map this bio around
2980 bio
= bio_alloc(GFP_NOIO
, 1);
2982 bio
->bi_sector
= bh
->b_blocknr
* (bh
->b_size
>> 9);
2983 bio
->bi_bdev
= bh
->b_bdev
;
2984 bio
->bi_io_vec
[0].bv_page
= bh
->b_page
;
2985 bio
->bi_io_vec
[0].bv_len
= bh
->b_size
;
2986 bio
->bi_io_vec
[0].bv_offset
= bh_offset(bh
);
2990 bio
->bi_size
= bh
->b_size
;
2992 bio
->bi_end_io
= end_bio_bh_io_sync
;
2993 bio
->bi_private
= bh
;
2996 submit_bio(rw
, bio
);
2998 if (bio_flagged(bio
, BIO_EOPNOTSUPP
))
3004 EXPORT_SYMBOL(submit_bh
);
3007 * ll_rw_block: low-level access to block devices (DEPRECATED)
3008 * @rw: whether to %READ or %WRITE or %SWRITE or maybe %READA (readahead)
3009 * @nr: number of &struct buffer_heads in the array
3010 * @bhs: array of pointers to &struct buffer_head
3012 * ll_rw_block() takes an array of pointers to &struct buffer_heads, and
3013 * requests an I/O operation on them, either a %READ or a %WRITE. The third
3014 * %SWRITE is like %WRITE only we make sure that the *current* data in buffers
3015 * are sent to disk. The fourth %READA option is described in the documentation
3016 * for generic_make_request() which ll_rw_block() calls.
3018 * This function drops any buffer that it cannot get a lock on (with the
3019 * BH_Lock state bit) unless SWRITE is required, any buffer that appears to be
3020 * clean when doing a write request, and any buffer that appears to be
3021 * up-to-date when doing read request. Further it marks as clean buffers that
3022 * are processed for writing (the buffer cache won't assume that they are
3023 * actually clean until the buffer gets unlocked).
3025 * ll_rw_block sets b_end_io to simple completion handler that marks
3026 * the buffer up-to-date (if approriate), unlocks the buffer and wakes
3029 * All of the buffers must be for the same device, and must also be a
3030 * multiple of the current approved size for the device.
3032 void ll_rw_block(int rw
, int nr
, struct buffer_head
*bhs
[])
3036 for (i
= 0; i
< nr
; i
++) {
3037 struct buffer_head
*bh
= bhs
[i
];
3039 if (rw
== SWRITE
|| rw
== SWRITE_SYNC
|| rw
== SWRITE_SYNC_PLUG
)
3041 else if (!trylock_buffer(bh
))
3044 if (rw
== WRITE
|| rw
== SWRITE
|| rw
== SWRITE_SYNC
||
3045 rw
== SWRITE_SYNC_PLUG
) {
3046 if (test_clear_buffer_dirty(bh
)) {
3047 bh
->b_end_io
= end_buffer_write_sync
;
3049 if (rw
== SWRITE_SYNC
)
3050 submit_bh(WRITE_SYNC
, bh
);
3052 submit_bh(WRITE
, bh
);
3056 if (!buffer_uptodate(bh
)) {
3057 bh
->b_end_io
= end_buffer_read_sync
;
3066 EXPORT_SYMBOL(ll_rw_block
);
3069 * For a data-integrity writeout, we need to wait upon any in-progress I/O
3070 * and then start new I/O and then wait upon it. The caller must have a ref on
3073 int sync_dirty_buffer(struct buffer_head
*bh
)
3077 WARN_ON(atomic_read(&bh
->b_count
) < 1);
3079 if (test_clear_buffer_dirty(bh
)) {
3081 bh
->b_end_io
= end_buffer_write_sync
;
3082 ret
= submit_bh(WRITE_SYNC
, bh
);
3084 if (buffer_eopnotsupp(bh
)) {
3085 clear_buffer_eopnotsupp(bh
);
3088 if (!ret
&& !buffer_uptodate(bh
))
3095 EXPORT_SYMBOL(sync_dirty_buffer
);
3098 * try_to_free_buffers() checks if all the buffers on this particular page
3099 * are unused, and releases them if so.
3101 * Exclusion against try_to_free_buffers may be obtained by either
3102 * locking the page or by holding its mapping's private_lock.
3104 * If the page is dirty but all the buffers are clean then we need to
3105 * be sure to mark the page clean as well. This is because the page
3106 * may be against a block device, and a later reattachment of buffers
3107 * to a dirty page will set *all* buffers dirty. Which would corrupt
3108 * filesystem data on the same device.
3110 * The same applies to regular filesystem pages: if all the buffers are
3111 * clean then we set the page clean and proceed. To do that, we require
3112 * total exclusion from __set_page_dirty_buffers(). That is obtained with
3115 * try_to_free_buffers() is non-blocking.
3117 static inline int buffer_busy(struct buffer_head
*bh
)
3119 return atomic_read(&bh
->b_count
) |
3120 (bh
->b_state
& ((1 << BH_Dirty
) | (1 << BH_Lock
)));
3124 drop_buffers(struct page
*page
, struct buffer_head
**buffers_to_free
)
3126 struct buffer_head
*head
= page_buffers(page
);
3127 struct buffer_head
*bh
;
3131 if (buffer_write_io_error(bh
) && page
->mapping
)
3132 set_bit(AS_EIO
, &page
->mapping
->flags
);
3133 if (buffer_busy(bh
))
3135 bh
= bh
->b_this_page
;
3136 } while (bh
!= head
);
3139 struct buffer_head
*next
= bh
->b_this_page
;
3141 if (bh
->b_assoc_map
)
3142 __remove_assoc_queue(bh
);
3144 } while (bh
!= head
);
3145 *buffers_to_free
= head
;
3146 __clear_page_buffers(page
);
3152 int try_to_free_buffers(struct page
*page
)
3154 struct address_space
* const mapping
= page
->mapping
;
3155 struct buffer_head
*buffers_to_free
= NULL
;
3158 BUG_ON(!PageLocked(page
));
3159 if (PageWriteback(page
))
3162 if (mapping
== NULL
) { /* can this still happen? */
3163 ret
= drop_buffers(page
, &buffers_to_free
);
3167 spin_lock(&mapping
->private_lock
);
3168 ret
= drop_buffers(page
, &buffers_to_free
);
3171 * If the filesystem writes its buffers by hand (eg ext3)
3172 * then we can have clean buffers against a dirty page. We
3173 * clean the page here; otherwise the VM will never notice
3174 * that the filesystem did any IO at all.
3176 * Also, during truncate, discard_buffer will have marked all
3177 * the page's buffers clean. We discover that here and clean
3180 * private_lock must be held over this entire operation in order
3181 * to synchronise against __set_page_dirty_buffers and prevent the
3182 * dirty bit from being lost.
3185 cancel_dirty_page(page
, PAGE_CACHE_SIZE
);
3186 spin_unlock(&mapping
->private_lock
);
3188 if (buffers_to_free
) {
3189 struct buffer_head
*bh
= buffers_to_free
;
3192 struct buffer_head
*next
= bh
->b_this_page
;
3193 free_buffer_head(bh
);
3195 } while (bh
!= buffers_to_free
);
3199 EXPORT_SYMBOL(try_to_free_buffers
);
3201 void block_sync_page(struct page
*page
)
3203 struct address_space
*mapping
;
3206 mapping
= page_mapping(page
);
3208 blk_run_backing_dev(mapping
->backing_dev_info
, page
);
3210 EXPORT_SYMBOL(block_sync_page
);
3213 * There are no bdflush tunables left. But distributions are
3214 * still running obsolete flush daemons, so we terminate them here.
3216 * Use of bdflush() is deprecated and will be removed in a future kernel.
3217 * The `pdflush' kernel threads fully replace bdflush daemons and this call.
3219 SYSCALL_DEFINE2(bdflush
, int, func
, long, data
)
3221 static int msg_count
;
3223 if (!capable(CAP_SYS_ADMIN
))
3226 if (msg_count
< 5) {
3229 "warning: process `%s' used the obsolete bdflush"
3230 " system call\n", current
->comm
);
3231 printk(KERN_INFO
"Fix your initscripts?\n");
3240 * Buffer-head allocation
3242 static struct kmem_cache
*bh_cachep
;
3245 * Once the number of bh's in the machine exceeds this level, we start
3246 * stripping them in writeback.
3248 static int max_buffer_heads
;
3250 int buffer_heads_over_limit
;
3252 struct bh_accounting
{
3253 int nr
; /* Number of live bh's */
3254 int ratelimit
; /* Limit cacheline bouncing */
3257 static DEFINE_PER_CPU(struct bh_accounting
, bh_accounting
) = {0, 0};
3259 static void recalc_bh_state(void)
3264 if (__get_cpu_var(bh_accounting
).ratelimit
++ < 4096)
3266 __get_cpu_var(bh_accounting
).ratelimit
= 0;
3267 for_each_online_cpu(i
)
3268 tot
+= per_cpu(bh_accounting
, i
).nr
;
3269 buffer_heads_over_limit
= (tot
> max_buffer_heads
);
3272 struct buffer_head
*alloc_buffer_head(gfp_t gfp_flags
)
3274 struct buffer_head
*ret
= kmem_cache_alloc(bh_cachep
, gfp_flags
);
3276 INIT_LIST_HEAD(&ret
->b_assoc_buffers
);
3277 get_cpu_var(bh_accounting
).nr
++;
3279 put_cpu_var(bh_accounting
);
3283 EXPORT_SYMBOL(alloc_buffer_head
);
3285 void free_buffer_head(struct buffer_head
*bh
)
3287 BUG_ON(!list_empty(&bh
->b_assoc_buffers
));
3288 kmem_cache_free(bh_cachep
, bh
);
3289 get_cpu_var(bh_accounting
).nr
--;
3291 put_cpu_var(bh_accounting
);
3293 EXPORT_SYMBOL(free_buffer_head
);
3295 static void buffer_exit_cpu(int cpu
)
3298 struct bh_lru
*b
= &per_cpu(bh_lrus
, cpu
);
3300 for (i
= 0; i
< BH_LRU_SIZE
; i
++) {
3304 get_cpu_var(bh_accounting
).nr
+= per_cpu(bh_accounting
, cpu
).nr
;
3305 per_cpu(bh_accounting
, cpu
).nr
= 0;
3306 put_cpu_var(bh_accounting
);
3309 static int buffer_cpu_notify(struct notifier_block
*self
,
3310 unsigned long action
, void *hcpu
)
3312 if (action
== CPU_DEAD
|| action
== CPU_DEAD_FROZEN
)
3313 buffer_exit_cpu((unsigned long)hcpu
);
3318 * bh_uptodate_or_lock - Test whether the buffer is uptodate
3319 * @bh: struct buffer_head
3321 * Return true if the buffer is up-to-date and false,
3322 * with the buffer locked, if not.
3324 int bh_uptodate_or_lock(struct buffer_head
*bh
)
3326 if (!buffer_uptodate(bh
)) {
3328 if (!buffer_uptodate(bh
))
3334 EXPORT_SYMBOL(bh_uptodate_or_lock
);
3337 * bh_submit_read - Submit a locked buffer for reading
3338 * @bh: struct buffer_head
3340 * Returns zero on success and -EIO on error.
3342 int bh_submit_read(struct buffer_head
*bh
)
3344 BUG_ON(!buffer_locked(bh
));
3346 if (buffer_uptodate(bh
)) {
3352 bh
->b_end_io
= end_buffer_read_sync
;
3353 submit_bh(READ
, bh
);
3355 if (buffer_uptodate(bh
))
3359 EXPORT_SYMBOL(bh_submit_read
);
3362 init_buffer_head(void *data
)
3364 struct buffer_head
*bh
= data
;
3366 memset(bh
, 0, sizeof(*bh
));
3367 INIT_LIST_HEAD(&bh
->b_assoc_buffers
);
3370 void __init
buffer_init(void)
3374 bh_cachep
= kmem_cache_create("buffer_head",
3375 sizeof(struct buffer_head
), 0,
3376 (SLAB_RECLAIM_ACCOUNT
|SLAB_PANIC
|
3381 * Limit the bh occupancy to 10% of ZONE_NORMAL
3383 nrpages
= (nr_free_buffer_pages() * 10) / 100;
3384 max_buffer_heads
= nrpages
* (PAGE_SIZE
/ sizeof(struct buffer_head
));
3385 hotcpu_notifier(buffer_cpu_notify
, 0);