OMAP3: PM: Prevented DVFS state switches when enabling off-mode
[linux-ginger.git] / drivers / dma / ipu / ipu_irq.c
blobdd8ebc75b667ad0089a1152fe7dd416a8ad786f6
1 /*
2 * Copyright (C) 2008
3 * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License version 2 as
7 * published by the Free Software Foundation.
8 */
10 #include <linux/init.h>
11 #include <linux/err.h>
12 #include <linux/spinlock.h>
13 #include <linux/delay.h>
14 #include <linux/clk.h>
15 #include <linux/irq.h>
16 #include <linux/io.h>
18 #include <mach/ipu.h>
20 #include "ipu_intern.h"
23 * Register read / write - shall be inlined by the compiler
25 static u32 ipu_read_reg(struct ipu *ipu, unsigned long reg)
27 return __raw_readl(ipu->reg_ipu + reg);
30 static void ipu_write_reg(struct ipu *ipu, u32 value, unsigned long reg)
32 __raw_writel(value, ipu->reg_ipu + reg);
37 * IPU IRQ chip driver
40 #define IPU_IRQ_NR_FN_BANKS 3
41 #define IPU_IRQ_NR_ERR_BANKS 2
42 #define IPU_IRQ_NR_BANKS (IPU_IRQ_NR_FN_BANKS + IPU_IRQ_NR_ERR_BANKS)
44 struct ipu_irq_bank {
45 unsigned int control;
46 unsigned int status;
47 spinlock_t lock;
48 struct ipu *ipu;
51 static struct ipu_irq_bank irq_bank[IPU_IRQ_NR_BANKS] = {
52 /* 3 groups of functional interrupts */
54 .control = IPU_INT_CTRL_1,
55 .status = IPU_INT_STAT_1,
56 }, {
57 .control = IPU_INT_CTRL_2,
58 .status = IPU_INT_STAT_2,
59 }, {
60 .control = IPU_INT_CTRL_3,
61 .status = IPU_INT_STAT_3,
63 /* 2 groups of error interrupts */
65 .control = IPU_INT_CTRL_4,
66 .status = IPU_INT_STAT_4,
67 }, {
68 .control = IPU_INT_CTRL_5,
69 .status = IPU_INT_STAT_5,
73 struct ipu_irq_map {
74 unsigned int irq;
75 int source;
76 struct ipu_irq_bank *bank;
77 struct ipu *ipu;
80 static struct ipu_irq_map irq_map[CONFIG_MX3_IPU_IRQS];
81 /* Protects allocations from the above array of maps */
82 static DEFINE_MUTEX(map_lock);
83 /* Protects register accesses and individual mappings */
84 static DEFINE_SPINLOCK(bank_lock);
86 static struct ipu_irq_map *src2map(unsigned int src)
88 int i;
90 for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++)
91 if (irq_map[i].source == src)
92 return irq_map + i;
94 return NULL;
97 static void ipu_irq_unmask(unsigned int irq)
99 struct ipu_irq_map *map = get_irq_chip_data(irq);
100 struct ipu_irq_bank *bank;
101 uint32_t reg;
102 unsigned long lock_flags;
104 spin_lock_irqsave(&bank_lock, lock_flags);
106 bank = map->bank;
107 if (!bank) {
108 spin_unlock_irqrestore(&bank_lock, lock_flags);
109 pr_err("IPU: %s(%u) - unmapped!\n", __func__, irq);
110 return;
113 reg = ipu_read_reg(bank->ipu, bank->control);
114 reg |= (1UL << (map->source & 31));
115 ipu_write_reg(bank->ipu, reg, bank->control);
117 spin_unlock_irqrestore(&bank_lock, lock_flags);
120 static void ipu_irq_mask(unsigned int irq)
122 struct ipu_irq_map *map = get_irq_chip_data(irq);
123 struct ipu_irq_bank *bank;
124 uint32_t reg;
125 unsigned long lock_flags;
127 spin_lock_irqsave(&bank_lock, lock_flags);
129 bank = map->bank;
130 if (!bank) {
131 spin_unlock_irqrestore(&bank_lock, lock_flags);
132 pr_err("IPU: %s(%u) - unmapped!\n", __func__, irq);
133 return;
136 reg = ipu_read_reg(bank->ipu, bank->control);
137 reg &= ~(1UL << (map->source & 31));
138 ipu_write_reg(bank->ipu, reg, bank->control);
140 spin_unlock_irqrestore(&bank_lock, lock_flags);
143 static void ipu_irq_ack(unsigned int irq)
145 struct ipu_irq_map *map = get_irq_chip_data(irq);
146 struct ipu_irq_bank *bank;
147 unsigned long lock_flags;
149 spin_lock_irqsave(&bank_lock, lock_flags);
151 bank = map->bank;
152 if (!bank) {
153 spin_unlock_irqrestore(&bank_lock, lock_flags);
154 pr_err("IPU: %s(%u) - unmapped!\n", __func__, irq);
155 return;
158 ipu_write_reg(bank->ipu, 1UL << (map->source & 31), bank->status);
159 spin_unlock_irqrestore(&bank_lock, lock_flags);
163 * ipu_irq_status() - returns the current interrupt status of the specified IRQ.
164 * @irq: interrupt line to get status for.
165 * @return: true if the interrupt is pending/asserted or false if the
166 * interrupt is not pending.
168 bool ipu_irq_status(unsigned int irq)
170 struct ipu_irq_map *map = get_irq_chip_data(irq);
171 struct ipu_irq_bank *bank;
172 unsigned long lock_flags;
173 bool ret;
175 spin_lock_irqsave(&bank_lock, lock_flags);
176 bank = map->bank;
177 ret = bank && ipu_read_reg(bank->ipu, bank->status) &
178 (1UL << (map->source & 31));
179 spin_unlock_irqrestore(&bank_lock, lock_flags);
181 return ret;
185 * ipu_irq_map() - map an IPU interrupt source to an IRQ number
186 * @source: interrupt source bit position (see below)
187 * @return: mapped IRQ number or negative error code
189 * The source parameter has to be explained further. On i.MX31 IPU has 137 IRQ
190 * sources, they are broken down in 5 32-bit registers, like 32, 32, 24, 32, 17.
191 * However, the source argument of this function is not the sequence number of
192 * the possible IRQ, but rather its bit position. So, first interrupt in fourth
193 * register has source number 96, and not 88. This makes calculations easier,
194 * and also provides forward compatibility with any future IPU implementations
195 * with any interrupt bit assignments.
197 int ipu_irq_map(unsigned int source)
199 int i, ret = -ENOMEM;
200 struct ipu_irq_map *map;
202 might_sleep();
204 mutex_lock(&map_lock);
205 map = src2map(source);
206 if (map) {
207 pr_err("IPU: Source %u already mapped to IRQ %u\n", source, map->irq);
208 ret = -EBUSY;
209 goto out;
212 for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++) {
213 if (irq_map[i].source < 0) {
214 unsigned long lock_flags;
216 spin_lock_irqsave(&bank_lock, lock_flags);
217 irq_map[i].source = source;
218 irq_map[i].bank = irq_bank + source / 32;
219 spin_unlock_irqrestore(&bank_lock, lock_flags);
221 ret = irq_map[i].irq;
222 pr_debug("IPU: mapped source %u to IRQ %u\n",
223 source, ret);
224 break;
227 out:
228 mutex_unlock(&map_lock);
230 if (ret < 0)
231 pr_err("IPU: couldn't map source %u: %d\n", source, ret);
233 return ret;
237 * ipu_irq_map() - map an IPU interrupt source to an IRQ number
238 * @source: interrupt source bit position (see ipu_irq_map())
239 * @return: 0 or negative error code
241 int ipu_irq_unmap(unsigned int source)
243 int i, ret = -EINVAL;
245 might_sleep();
247 mutex_lock(&map_lock);
248 for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++) {
249 if (irq_map[i].source == source) {
250 unsigned long lock_flags;
252 pr_debug("IPU: unmapped source %u from IRQ %u\n",
253 source, irq_map[i].irq);
255 spin_lock_irqsave(&bank_lock, lock_flags);
256 irq_map[i].source = -EINVAL;
257 irq_map[i].bank = NULL;
258 spin_unlock_irqrestore(&bank_lock, lock_flags);
260 ret = 0;
261 break;
264 mutex_unlock(&map_lock);
266 return ret;
269 /* Chained IRQ handler for IPU error interrupt */
270 static void ipu_irq_err(unsigned int irq, struct irq_desc *desc)
272 struct ipu *ipu = get_irq_data(irq);
273 u32 status;
274 int i, line;
276 for (i = IPU_IRQ_NR_FN_BANKS; i < IPU_IRQ_NR_BANKS; i++) {
277 struct ipu_irq_bank *bank = irq_bank + i;
279 spin_lock(&bank_lock);
280 status = ipu_read_reg(ipu, bank->status);
282 * Don't think we have to clear all interrupts here, they will
283 * be acked by ->handle_irq() (handle_level_irq). However, we
284 * might want to clear unhandled interrupts after the loop...
286 status &= ipu_read_reg(ipu, bank->control);
287 spin_unlock(&bank_lock);
288 while ((line = ffs(status))) {
289 struct ipu_irq_map *map;
291 line--;
292 status &= ~(1UL << line);
294 spin_lock(&bank_lock);
295 map = src2map(32 * i + line);
296 if (map)
297 irq = map->irq;
298 spin_unlock(&bank_lock);
300 if (!map) {
301 pr_err("IPU: Interrupt on unmapped source %u bank %d\n",
302 line, i);
303 continue;
305 generic_handle_irq(irq);
310 /* Chained IRQ handler for IPU function interrupt */
311 static void ipu_irq_fn(unsigned int irq, struct irq_desc *desc)
313 struct ipu *ipu = get_irq_data(irq);
314 u32 status;
315 int i, line;
317 for (i = 0; i < IPU_IRQ_NR_FN_BANKS; i++) {
318 struct ipu_irq_bank *bank = irq_bank + i;
320 spin_lock(&bank_lock);
321 status = ipu_read_reg(ipu, bank->status);
322 /* Not clearing all interrupts, see above */
323 status &= ipu_read_reg(ipu, bank->control);
324 spin_unlock(&bank_lock);
325 while ((line = ffs(status))) {
326 struct ipu_irq_map *map;
328 line--;
329 status &= ~(1UL << line);
331 spin_lock(&bank_lock);
332 map = src2map(32 * i + line);
333 if (map)
334 irq = map->irq;
335 spin_unlock(&bank_lock);
337 if (!map) {
338 pr_err("IPU: Interrupt on unmapped source %u bank %d\n",
339 line, i);
340 continue;
342 generic_handle_irq(irq);
347 static struct irq_chip ipu_irq_chip = {
348 .name = "ipu_irq",
349 .ack = ipu_irq_ack,
350 .mask = ipu_irq_mask,
351 .unmask = ipu_irq_unmask,
354 /* Install the IRQ handler */
355 int __init ipu_irq_attach_irq(struct ipu *ipu, struct platform_device *dev)
357 struct ipu_platform_data *pdata = dev->dev.platform_data;
358 unsigned int irq, irq_base, i;
360 irq_base = pdata->irq_base;
362 for (i = 0; i < IPU_IRQ_NR_BANKS; i++)
363 irq_bank[i].ipu = ipu;
365 for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++) {
366 int ret;
368 irq = irq_base + i;
369 ret = set_irq_chip(irq, &ipu_irq_chip);
370 if (ret < 0)
371 return ret;
372 ret = set_irq_chip_data(irq, irq_map + i);
373 if (ret < 0)
374 return ret;
375 irq_map[i].ipu = ipu;
376 irq_map[i].irq = irq;
377 irq_map[i].source = -EINVAL;
378 set_irq_handler(irq, handle_level_irq);
379 #ifdef CONFIG_ARM
380 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
381 #endif
384 set_irq_data(ipu->irq_fn, ipu);
385 set_irq_chained_handler(ipu->irq_fn, ipu_irq_fn);
387 set_irq_data(ipu->irq_err, ipu);
388 set_irq_chained_handler(ipu->irq_err, ipu_irq_err);
390 return 0;
393 void ipu_irq_detach_irq(struct ipu *ipu, struct platform_device *dev)
395 struct ipu_platform_data *pdata = dev->dev.platform_data;
396 unsigned int irq, irq_base;
398 irq_base = pdata->irq_base;
400 set_irq_chained_handler(ipu->irq_fn, NULL);
401 set_irq_data(ipu->irq_fn, NULL);
403 set_irq_chained_handler(ipu->irq_err, NULL);
404 set_irq_data(ipu->irq_err, NULL);
406 for (irq = irq_base; irq < irq_base + CONFIG_MX3_IPU_IRQS; irq++) {
407 #ifdef CONFIG_ARM
408 set_irq_flags(irq, 0);
409 #endif
410 set_irq_chip(irq, NULL);
411 set_irq_chip_data(irq, NULL);