OMAP3: SR: Reset voltage level on SR disable
[linux-ginger.git] / arch / arm / mach-mx2 / mx21ads.c
blobcf5f77cbc2f1c6d9685e7baf33150690fb3ff53b
1 /*
2 * Copyright (C) 2000 Deep Blue Solutions Ltd
3 * Copyright (C) 2002 Shane Nay (shane@minirl.com)
4 * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
21 #include <linux/platform_device.h>
22 #include <linux/mtd/mtd.h>
23 #include <linux/mtd/physmap.h>
24 #include <linux/gpio.h>
25 #include <mach/common.h>
26 #include <mach/hardware.h>
27 #include <asm/mach-types.h>
28 #include <asm/mach/arch.h>
29 #include <asm/mach/time.h>
30 #include <asm/mach/map.h>
31 #include <mach/imx-uart.h>
32 #include <mach/imxfb.h>
33 #include <mach/iomux.h>
34 #include <mach/mxc_nand.h>
35 #include <mach/mmc.h>
36 #include <mach/board-mx21ads.h>
38 #include "devices.h"
40 static unsigned int mx21ads_pins[] = {
42 /* CS8900A */
43 (GPIO_PORTE | GPIO_GPIO | GPIO_IN | 11),
45 /* UART1 */
46 PE12_PF_UART1_TXD,
47 PE13_PF_UART1_RXD,
48 PE14_PF_UART1_CTS,
49 PE15_PF_UART1_RTS,
51 /* UART3 (IrDA) - only TXD and RXD */
52 PE8_PF_UART3_TXD,
53 PE9_PF_UART3_RXD,
55 /* UART4 */
56 PB26_AF_UART4_RTS,
57 PB28_AF_UART4_TXD,
58 PB29_AF_UART4_CTS,
59 PB31_AF_UART4_RXD,
61 /* LCDC */
62 PA5_PF_LSCLK,
63 PA6_PF_LD0,
64 PA7_PF_LD1,
65 PA8_PF_LD2,
66 PA9_PF_LD3,
67 PA10_PF_LD4,
68 PA11_PF_LD5,
69 PA12_PF_LD6,
70 PA13_PF_LD7,
71 PA14_PF_LD8,
72 PA15_PF_LD9,
73 PA16_PF_LD10,
74 PA17_PF_LD11,
75 PA18_PF_LD12,
76 PA19_PF_LD13,
77 PA20_PF_LD14,
78 PA21_PF_LD15,
79 PA22_PF_LD16,
80 PA24_PF_REV, /* Sharp panel dedicated signal */
81 PA25_PF_CLS, /* Sharp panel dedicated signal */
82 PA26_PF_PS, /* Sharp panel dedicated signal */
83 PA27_PF_SPL_SPR, /* Sharp panel dedicated signal */
84 PA28_PF_HSYNC,
85 PA29_PF_VSYNC,
86 PA30_PF_CONTRAST,
87 PA31_PF_OE_ACD,
89 /* MMC/SDHC */
90 PE18_PF_SD1_D0,
91 PE19_PF_SD1_D1,
92 PE20_PF_SD1_D2,
93 PE21_PF_SD1_D3,
94 PE22_PF_SD1_CMD,
95 PE23_PF_SD1_CLK,
97 /* NFC */
98 PF0_PF_NRFB,
99 PF1_PF_NFCE,
100 PF2_PF_NFWP,
101 PF3_PF_NFCLE,
102 PF4_PF_NFALE,
103 PF5_PF_NFRE,
104 PF6_PF_NFWE,
105 PF7_PF_NFIO0,
106 PF8_PF_NFIO1,
107 PF9_PF_NFIO2,
108 PF10_PF_NFIO3,
109 PF11_PF_NFIO4,
110 PF12_PF_NFIO5,
111 PF13_PF_NFIO6,
112 PF14_PF_NFIO7,
115 /* ADS's NOR flash: 2x AM29BDS128HE9VKI on 32-bit bus */
116 static struct physmap_flash_data mx21ads_flash_data = {
117 .width = 4,
120 static struct resource mx21ads_flash_resource = {
121 .start = CS0_BASE_ADDR,
122 .end = CS0_BASE_ADDR + 0x02000000 - 1,
123 .flags = IORESOURCE_MEM,
126 static struct platform_device mx21ads_nor_mtd_device = {
127 .name = "physmap-flash",
128 .id = 0,
129 .dev = {
130 .platform_data = &mx21ads_flash_data,
132 .num_resources = 1,
133 .resource = &mx21ads_flash_resource,
136 static struct imxuart_platform_data uart_pdata = {
137 .flags = IMXUART_HAVE_RTSCTS,
140 static struct imxuart_platform_data uart_norts_pdata = {
144 static int mx21ads_fb_init(struct platform_device *pdev)
146 u16 tmp;
148 tmp = __raw_readw(MX21ADS_IO_REG);
149 tmp |= MX21ADS_IO_LCDON;
150 __raw_writew(tmp, MX21ADS_IO_REG);
151 return 0;
154 static void mx21ads_fb_exit(struct platform_device *pdev)
156 u16 tmp;
158 tmp = __raw_readw(MX21ADS_IO_REG);
159 tmp &= ~MX21ADS_IO_LCDON;
160 __raw_writew(tmp, MX21ADS_IO_REG);
164 * Connected is a portrait Sharp-QVGA display
165 * of type: LQ035Q7DB02
167 static struct imx_fb_videomode mx21ads_modes[] = {
169 .mode = {
170 .name = "Sharp-LQ035Q7",
171 .refresh = 60,
172 .xres = 240,
173 .yres = 320,
174 .pixclock = 188679, /* in ps (5.3MHz) */
175 .hsync_len = 2,
176 .left_margin = 6,
177 .right_margin = 16,
178 .vsync_len = 1,
179 .upper_margin = 8,
180 .lower_margin = 10,
182 .pcr = 0xfb108bc7,
183 .bpp = 16,
187 static struct imx_fb_platform_data mx21ads_fb_data = {
188 .mode = mx21ads_modes,
189 .num_modes = ARRAY_SIZE(mx21ads_modes),
191 .pwmr = 0x00a903ff,
192 .lscr1 = 0x00120300,
193 .dmacr = 0x00020008,
195 .init = mx21ads_fb_init,
196 .exit = mx21ads_fb_exit,
199 static int mx21ads_sdhc_get_ro(struct device *dev)
201 return (__raw_readw(MX21ADS_IO_REG) & MX21ADS_IO_SD_WP) ? 1 : 0;
204 static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq,
205 void *data)
207 int ret;
209 ret = request_irq(IRQ_GPIOD(25), detect_irq,
210 IRQF_TRIGGER_FALLING, "mmc-detect", data);
211 if (ret)
212 goto out;
213 return 0;
214 out:
215 return ret;
218 static void mx21ads_sdhc_exit(struct device *dev, void *data)
220 free_irq(IRQ_GPIOD(25), data);
223 static struct imxmmc_platform_data mx21ads_sdhc_pdata = {
224 .ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31, /* 3.0V */
225 .get_ro = mx21ads_sdhc_get_ro,
226 .init = mx21ads_sdhc_init,
227 .exit = mx21ads_sdhc_exit,
230 static struct mxc_nand_platform_data mx21ads_nand_board_info = {
231 .width = 1,
232 .hw_ecc = 1,
235 static struct map_desc mx21ads_io_desc[] __initdata = {
237 * Memory-mapped I/O on MX21ADS Base board:
238 * - CS8900A Ethernet controller
239 * - ST16C2552CJ UART
240 * - CPU and Base board version
241 * - Base board I/O register
244 .virtual = MX21ADS_MMIO_BASE_ADDR,
245 .pfn = __phys_to_pfn(CS1_BASE_ADDR),
246 .length = MX21ADS_MMIO_SIZE,
247 .type = MT_DEVICE,
251 static void __init mx21ads_map_io(void)
253 mx21_map_io();
254 iotable_init(mx21ads_io_desc, ARRAY_SIZE(mx21ads_io_desc));
257 static struct platform_device *platform_devices[] __initdata = {
258 &mx21ads_nor_mtd_device,
261 static void __init mx21ads_board_init(void)
263 mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins),
264 "mx21ads");
266 mxc_register_device(&mxc_uart_device0, &uart_pdata);
267 mxc_register_device(&mxc_uart_device2, &uart_norts_pdata);
268 mxc_register_device(&mxc_uart_device3, &uart_pdata);
269 mxc_register_device(&mxc_fb_device, &mx21ads_fb_data);
270 mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata);
271 mxc_register_device(&mxc_nand_device, &mx21ads_nand_board_info);
273 platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
276 static void __init mx21ads_timer_init(void)
278 mx21_clocks_init(32768, 26000000);
281 static struct sys_timer mx21ads_timer = {
282 .init = mx21ads_timer_init,
285 MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
286 /* maintainer: Freescale Semiconductor, Inc. */
287 .phys_io = AIPI_BASE_ADDR,
288 .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
289 .boot_params = PHYS_OFFSET + 0x100,
290 .map_io = mx21ads_map_io,
291 .init_irq = mx21_init_irq,
292 .init_machine = mx21ads_board_init,
293 .timer = &mx21ads_timer,
294 MACHINE_END