arch/arm/mach-omap1/pm.c

   1 /*
   2  * linux/arch/arm/mach-omap1/pm.c
   3  *
   4  * OMAP Power Management Routines
   5  *
   6  * Original code for the SA11x0:
   7  * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
   8  *
   9  * Modified for the PXA250 by Nicolas Pitre:
  10  * Copyright (c) 2002 Monta Vista Software, Inc.
  11  *
  12  * Modified for the OMAP1510 by David Singleton:
  13  * Copyright (c) 2002 Monta Vista Software, Inc.
  14  *
  15  * Cleanup 2004 for OMAP1510/1610 by Dirk Behme <dirk.behme@de.bosch.com>
  16  *
  17  * This program is free software; you can redistribute it and/or modify it
  18  * under the terms of the GNU General Public License as published by the
  19  * Free Software Foundation; either version 2 of the License, or (at your
  20  * option) any later version.
  21  *
  22  * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
  23  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
  24  * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
  25  * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  26  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  27  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
  28  * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
  29  * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  30  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  31  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  32  *
  33  * You should have received a copy of the GNU General Public License along
  34  * with this program; if not, write to the Free Software Foundation, Inc.,
  35  * 675 Mass Ave, Cambridge, MA 02139, USA.
  36  */
  37
  38 #include <linux/suspend.h>
  39 #include <linux/sched.h>
  40 #include <linux/proc_fs.h>
  41 #include <linux/interrupt.h>
  42 #include <linux/sysfs.h>
  43 #include <linux/module.h>
  44 #include <linux/io.h>
  45
  46 #include <asm/irq.h>
  47 #include <asm/atomic.h>
  48 #include <asm/mach/time.h>
  49 #include <asm/mach/irq.h>
  50
  51 #include <plat/cpu.h>
  52 #include <mach/irqs.h>
  53 #include <plat/clock.h>
  54 #include <plat/sram.h>
  55 #include <plat/tc.h>
  56 #include <plat/mux.h>
  57 #include <plat/dma.h>
  58 #include <plat/dmtimer.h>
  59
  60 #include "pm.h"
  61
  62 static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
  63 static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE];
  64 static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE];
  65 static unsigned int mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_SIZE];
  66 static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE];
  67 static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
  68
  69 #ifdef CONFIG_OMAP_32K_TIMER
  70
  71 static unsigned short enable_dyn_sleep = 1;
  72
  73 static ssize_t idle_show(struct kobject *kobj, struct kobj_attribute *attr,
  74                          char *buf)
  75 {
  76         return sprintf(buf, "%hu\n", enable_dyn_sleep);
  77 }
  78
  79 static ssize_t idle_store(struct kobject *kobj, struct kobj_attribute *attr,
  80                           const char * buf, size_t n)
  81 {
  82         unsigned short value;
  83         if (sscanf(buf, "%hu", &value) != 1 ||
  84             (value != 0 && value != 1)) {
  85                 printk(KERN_ERR "idle_sleep_store: Invalid value\n");
  86                 return -EINVAL;
  87         }
  88         enable_dyn_sleep = value;
  89         return n;
  90 }
  91
  92 static struct kobj_attribute sleep_while_idle_attr =
  93         __ATTR(sleep_while_idle, 0644, idle_show, idle_store);
  94
  95 #endif
  96
  97 static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL;
  98
  99 /*
 100  * Let's power down on idle, but only if we are really
 101  * idle, because once we start down the path of
 102  * going idle we continue to do idle even if we get
 103  * a clock tick interrupt . .
 104  */
 105 void omap1_pm_idle(void)
 106 {
 107         extern __u32 arm_idlect1_mask;
 108         __u32 use_idlect1 = arm_idlect1_mask;
 109         int do_sleep = 0;
 110
 111         local_irq_disable();
 112         local_fiq_disable();
 113         if (need_resched()) {
 114                 local_fiq_enable();
 115                 local_irq_enable();
 116                 return;
 117         }
 118
 119 #ifdef CONFIG_OMAP_MPU_TIMER
 120 #warning Enable 32kHz OS timer in order to allow sleep states in idle
 121         use_idlect1 = use_idlect1 & ~(1 << 9);
 122 #else
 123
 124         while (enable_dyn_sleep) {
 125
 126 #ifdef CONFIG_CBUS_TAHVO_USB
 127                 extern int vbus_active;
 128                 /* Clock requirements? */
 129                 if (vbus_active)
 130                         break;
 131 #endif
 132                 do_sleep = 1;
 133                 break;
 134         }
 135
 136 #endif
 137
 138 #ifdef CONFIG_OMAP_DM_TIMER
 139         use_idlect1 = omap_dm_timer_modify_idlect_mask(use_idlect1);
 140 #endif
 141
 142         if (omap_dma_running())
 143                 use_idlect1 &= ~(1 << 6);
 144
 145         /* We should be able to remove the do_sleep variable and multiple
 146          * tests above as soon as drivers, timer and DMA code have been fixed.
 147          * Even the sleep block count should become obsolete. */
 148         if ((use_idlect1 != ~0) || !do_sleep) {
 149
 150                 __u32 saved_idlect1 = omap_readl(ARM_IDLECT1);
 151                 if (cpu_is_omap15xx())
 152                         use_idlect1 &= OMAP1510_BIG_SLEEP_REQUEST;
 153                 else
 154                         use_idlect1 &= OMAP1610_IDLECT1_SLEEP_VAL;
 155                 omap_writel(use_idlect1, ARM_IDLECT1);
 156                 __asm__ volatile ("mcr  p15, 0, r0, c7, c0, 4");
 157                 omap_writel(saved_idlect1, ARM_IDLECT1);
 158
 159                 local_fiq_enable();
 160                 local_irq_enable();
 161                 return;
 162         }
 163         omap_sram_suspend(omap_readl(ARM_IDLECT1),
 164                           omap_readl(ARM_IDLECT2));
 165
 166         local_fiq_enable();
 167         local_irq_enable();
 168 }
 169
 170 /*
 171  * Configuration of the wakeup event is board specific. For the
 172  * moment we put it into this helper function. Later it may move
 173  * to board specific files.
 174  */
 175 static void omap_pm_wakeup_setup(void)
 176 {
 177         u32 level1_wake = 0;
 178         u32 level2_wake = OMAP_IRQ_BIT(INT_UART2);
 179
 180         /*
 181          * Turn off all interrupts except GPIO bank 1, L1-2nd level cascade,
 182          * and the L2 wakeup interrupts: keypad and UART2. Note that the
 183          * drivers must still separately call omap_set_gpio_wakeup() to
 184          * wake up to a GPIO interrupt.
 185          */
 186         if (cpu_is_omap7xx())
 187                 level1_wake = OMAP_IRQ_BIT(INT_7XX_GPIO_BANK1) |
 188                         OMAP_IRQ_BIT(INT_7XX_IH2_IRQ);
 189         else if (cpu_is_omap15xx())
 190                 level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) |
 191                         OMAP_IRQ_BIT(INT_1510_IH2_IRQ);
 192         else if (cpu_is_omap16xx())
 193                 level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) |
 194                         OMAP_IRQ_BIT(INT_1610_IH2_IRQ);
 195
 196         omap_writel(~level1_wake, OMAP_IH1_MIR);
 197
 198         if (cpu_is_omap7xx()) {
 199                 omap_writel(~level2_wake, OMAP_IH2_0_MIR);
 200                 omap_writel(~(OMAP_IRQ_BIT(INT_7XX_WAKE_UP_REQ) |
 201                                 OMAP_IRQ_BIT(INT_7XX_MPUIO_KEYPAD)),
 202                                 OMAP_IH2_1_MIR);
 203         } else if (cpu_is_omap15xx()) {
 204                 level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD);
 205                 omap_writel(~level2_wake,  OMAP_IH2_MIR);
 206         } else if (cpu_is_omap16xx()) {
 207                 level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD);
 208                 omap_writel(~level2_wake, OMAP_IH2_0_MIR);
 209
 210                 /* INT_1610_WAKE_UP_REQ is needed for GPIO wakeup... */
 211                 omap_writel(~OMAP_IRQ_BIT(INT_1610_WAKE_UP_REQ),
 212                             OMAP_IH2_1_MIR);
 213                 omap_writel(~0x0, OMAP_IH2_2_MIR);
 214                 omap_writel(~0x0, OMAP_IH2_3_MIR);
 215         }
 216
 217         /*  New IRQ agreement, recalculate in cascade order */
 218         omap_writel(1, OMAP_IH2_CONTROL);
 219         omap_writel(1, OMAP_IH1_CONTROL);
 220 }
 221
 222 #define EN_DSPCK        13      /* ARM_CKCTL */
 223 #define EN_APICK        6       /* ARM_IDLECT2 */
 224 #define DSP_EN          1       /* ARM_RSTCT1 */
 225
 226 void omap1_pm_suspend(void)
 227 {
 228         unsigned long arg0 = 0, arg1 = 0;
 229
 230         printk(KERN_INFO "PM: OMAP%x is trying to enter deep sleep...\n",
 231                 omap_rev());
 232
 233         omap_serial_wake_trigger(1);
 234
 235         if (!cpu_is_omap15xx())
 236                 omap_writew(0xffff, ULPD_SOFT_DISABLE_REQ_REG);
 237
 238         /*
 239          * Step 1: turn off interrupts (FIXME: NOTE: already disabled)
 240          */
 241
 242         local_irq_disable();
 243         local_fiq_disable();
 244
 245         /*
 246          * Step 2: save registers
 247          *
 248          * The omap is a strange/beautiful device. The caches, memory
 249          * and register state are preserved across power saves.
 250          * We have to save and restore very little register state to
 251          * idle the omap.
 252          *
 253          * Save interrupt, MPUI, ARM and UPLD control registers.
 254          */
 255
 256         if (cpu_is_omap7xx()) {
 257                 MPUI7XX_SAVE(OMAP_IH1_MIR);
 258                 MPUI7XX_SAVE(OMAP_IH2_0_MIR);
 259                 MPUI7XX_SAVE(OMAP_IH2_1_MIR);
 260                 MPUI7XX_SAVE(MPUI_CTRL);
 261                 MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG);
 262                 MPUI7XX_SAVE(MPUI_DSP_API_CONFIG);
 263                 MPUI7XX_SAVE(EMIFS_CONFIG);
 264                 MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG);
 265
 266         } else if (cpu_is_omap15xx()) {
 267                 MPUI1510_SAVE(OMAP_IH1_MIR);
 268                 MPUI1510_SAVE(OMAP_IH2_MIR);
 269                 MPUI1510_SAVE(MPUI_CTRL);
 270                 MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG);
 271                 MPUI1510_SAVE(MPUI_DSP_API_CONFIG);
 272                 MPUI1510_SAVE(EMIFS_CONFIG);
 273                 MPUI1510_SAVE(EMIFF_SDRAM_CONFIG);
 274         } else if (cpu_is_omap16xx()) {
 275                 MPUI1610_SAVE(OMAP_IH1_MIR);
 276                 MPUI1610_SAVE(OMAP_IH2_0_MIR);
 277                 MPUI1610_SAVE(OMAP_IH2_1_MIR);
 278                 MPUI1610_SAVE(OMAP_IH2_2_MIR);
 279                 MPUI1610_SAVE(OMAP_IH2_3_MIR);
 280                 MPUI1610_SAVE(MPUI_CTRL);
 281                 MPUI1610_SAVE(MPUI_DSP_BOOT_CONFIG);
 282                 MPUI1610_SAVE(MPUI_DSP_API_CONFIG);
 283                 MPUI1610_SAVE(EMIFS_CONFIG);
 284                 MPUI1610_SAVE(EMIFF_SDRAM_CONFIG);
 285         }
 286
 287         ARM_SAVE(ARM_CKCTL);
 288         ARM_SAVE(ARM_IDLECT1);
 289         ARM_SAVE(ARM_IDLECT2);
 290         if (!(cpu_is_omap15xx()))
 291                 ARM_SAVE(ARM_IDLECT3);
 292         ARM_SAVE(ARM_EWUPCT);
 293         ARM_SAVE(ARM_RSTCT1);
 294         ARM_SAVE(ARM_RSTCT2);
 295         ARM_SAVE(ARM_SYSST);
 296         ULPD_SAVE(ULPD_CLOCK_CTRL);
 297         ULPD_SAVE(ULPD_STATUS_REQ);
 298
 299         /* (Step 3 removed - we now allow deep sleep by default) */
 300
 301         /*
 302          * Step 4: OMAP DSP Shutdown
 303          */
 304
 305         /* stop DSP */
 306         omap_writew(omap_readw(ARM_RSTCT1) & ~(1 << DSP_EN), ARM_RSTCT1);
 307
 308                 /* shut down dsp_ck */
 309         if (!cpu_is_omap7xx())
 310                 omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL);
 311
 312         /* temporarily enabling api_ck to access DSP registers */
 313         omap_writew(omap_readw(ARM_IDLECT2) | 1 << EN_APICK, ARM_IDLECT2);
 314
 315         /* save DSP registers */
 316         DSP_SAVE(DSP_IDLECT2);
 317
 318         /* Stop all DSP domain clocks */
 319         __raw_writew(0, DSP_IDLECT2);
 320
 321         /*
 322          * Step 5: Wakeup Event Setup
 323          */
 324
 325         omap_pm_wakeup_setup();
 326
 327         /*
 328          * Step 6: ARM and Traffic controller shutdown
 329          */
 330
 331         /* disable ARM watchdog */
 332         omap_writel(0x00F5, OMAP_WDT_TIMER_MODE);
 333         omap_writel(0x00A0, OMAP_WDT_TIMER_MODE);
 334
 335         /*
 336          * Step 6b: ARM and Traffic controller shutdown
 337          *
 338          * Step 6 continues here. Prepare jump to power management
 339          * assembly code in internal SRAM.
 340          *
 341          * Since the omap_cpu_suspend routine has been copied to
 342          * SRAM, we'll do an indirect procedure call to it and pass the
 343          * contents of arm_idlect1 and arm_idlect2 so it can restore
 344          * them when it wakes up and it will return.
 345          */
 346
 347         arg0 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT1];
 348         arg1 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT2];
 349
 350         /*
 351          * Step 6c: ARM and Traffic controller shutdown
 352          *
 353          * Jump to assembly code. The processor will stay there
 354          * until wake up.
 355          */
 356         omap_sram_suspend(arg0, arg1);
 357
 358         /*
 359          * If we are here, processor is woken up!
 360          */
 361
 362         /*
 363          * Restore DSP clocks
 364          */
 365
 366         /* again temporarily enabling api_ck to access DSP registers */
 367         omap_writew(omap_readw(ARM_IDLECT2) | 1 << EN_APICK, ARM_IDLECT2);
 368
 369         /* Restore DSP domain clocks */
 370         DSP_RESTORE(DSP_IDLECT2);
 371
 372         /*
 373          * Restore ARM state, except ARM_IDLECT1/2 which omap_cpu_suspend did
 374          */
 375
 376         if (!(cpu_is_omap15xx()))
 377                 ARM_RESTORE(ARM_IDLECT3);
 378         ARM_RESTORE(ARM_CKCTL);
 379         ARM_RESTORE(ARM_EWUPCT);
 380         ARM_RESTORE(ARM_RSTCT1);
 381         ARM_RESTORE(ARM_RSTCT2);
 382         ARM_RESTORE(ARM_SYSST);
 383         ULPD_RESTORE(ULPD_CLOCK_CTRL);
 384         ULPD_RESTORE(ULPD_STATUS_REQ);
 385
 386         if (cpu_is_omap7xx()) {
 387                 MPUI7XX_RESTORE(EMIFS_CONFIG);
 388                 MPUI7XX_RESTORE(EMIFF_SDRAM_CONFIG);
 389                 MPUI7XX_RESTORE(OMAP_IH1_MIR);
 390                 MPUI7XX_RESTORE(OMAP_IH2_0_MIR);
 391                 MPUI7XX_RESTORE(OMAP_IH2_1_MIR);
 392         } else if (cpu_is_omap15xx()) {
 393                 MPUI1510_RESTORE(MPUI_CTRL);
 394                 MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG);
 395                 MPUI1510_RESTORE(MPUI_DSP_API_CONFIG);
 396                 MPUI1510_RESTORE(EMIFS_CONFIG);
 397                 MPUI1510_RESTORE(EMIFF_SDRAM_CONFIG);
 398                 MPUI1510_RESTORE(OMAP_IH1_MIR);
 399                 MPUI1510_RESTORE(OMAP_IH2_MIR);
 400         } else if (cpu_is_omap16xx()) {
 401                 MPUI1610_RESTORE(MPUI_CTRL);
 402                 MPUI1610_RESTORE(MPUI_DSP_BOOT_CONFIG);
 403                 MPUI1610_RESTORE(MPUI_DSP_API_CONFIG);
 404                 MPUI1610_RESTORE(EMIFS_CONFIG);
 405                 MPUI1610_RESTORE(EMIFF_SDRAM_CONFIG);
 406
 407                 MPUI1610_RESTORE(OMAP_IH1_MIR);
 408                 MPUI1610_RESTORE(OMAP_IH2_0_MIR);
 409                 MPUI1610_RESTORE(OMAP_IH2_1_MIR);
 410                 MPUI1610_RESTORE(OMAP_IH2_2_MIR);
 411                 MPUI1610_RESTORE(OMAP_IH2_3_MIR);
 412         }
 413
 414         if (!cpu_is_omap15xx())
 415                 omap_writew(0, ULPD_SOFT_DISABLE_REQ_REG);
 416
 417         /*
 418          * Re-enable interrupts
 419          */
 420
 421         local_irq_enable();
 422         local_fiq_enable();
 423
 424         omap_serial_wake_trigger(0);
 425
 426         printk(KERN_INFO "PM: OMAP%x is re-starting from deep sleep...\n",
 427                 omap_rev());
 428 }
 429
 430 #if defined(DEBUG) && defined(CONFIG_PROC_FS)
 431 static int g_read_completed;
 432
 433 /*
 434  * Read system PM registers for debugging
 435  */
 436 static int omap_pm_read_proc(
 437         char *page_buffer,
 438         char **my_first_byte,
 439         off_t virtual_start,
 440         int length,
 441         int *eof,
 442         void *data)
 443 {
 444         int my_buffer_offset = 0;
 445         char * const my_base = page_buffer;
 446
 447         ARM_SAVE(ARM_CKCTL);
 448         ARM_SAVE(ARM_IDLECT1);
 449         ARM_SAVE(ARM_IDLECT2);
 450         if (!(cpu_is_omap15xx()))
 451                 ARM_SAVE(ARM_IDLECT3);
 452         ARM_SAVE(ARM_EWUPCT);
 453         ARM_SAVE(ARM_RSTCT1);
 454         ARM_SAVE(ARM_RSTCT2);
 455         ARM_SAVE(ARM_SYSST);
 456
 457         ULPD_SAVE(ULPD_IT_STATUS);
 458         ULPD_SAVE(ULPD_CLOCK_CTRL);
 459         ULPD_SAVE(ULPD_SOFT_REQ);
 460         ULPD_SAVE(ULPD_STATUS_REQ);
 461         ULPD_SAVE(ULPD_DPLL_CTRL);
 462         ULPD_SAVE(ULPD_POWER_CTRL);
 463
 464         if (cpu_is_omap7xx()) {
 465                 MPUI7XX_SAVE(MPUI_CTRL);
 466                 MPUI7XX_SAVE(MPUI_DSP_STATUS);
 467                 MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG);
 468                 MPUI7XX_SAVE(MPUI_DSP_API_CONFIG);
 469                 MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG);
 470                 MPUI7XX_SAVE(EMIFS_CONFIG);
 471         } else if (cpu_is_omap15xx()) {
 472                 MPUI1510_SAVE(MPUI_CTRL);
 473                 MPUI1510_SAVE(MPUI_DSP_STATUS);
 474                 MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG);
 475                 MPUI1510_SAVE(MPUI_DSP_API_CONFIG);
 476                 MPUI1510_SAVE(EMIFF_SDRAM_CONFIG);
 477                 MPUI1510_SAVE(EMIFS_CONFIG);
 478         } else if (cpu_is_omap16xx()) {
 479                 MPUI1610_SAVE(MPUI_CTRL);
 480                 MPUI1610_SAVE(MPUI_DSP_STATUS);
 481                 MPUI1610_SAVE(MPUI_DSP_BOOT_CONFIG);
 482                 MPUI1610_SAVE(MPUI_DSP_API_CONFIG);
 483                 MPUI1610_SAVE(EMIFF_SDRAM_CONFIG);
 484                 MPUI1610_SAVE(EMIFS_CONFIG);
 485         }
 486
 487         if (virtual_start == 0) {
 488                 g_read_completed = 0;
 489
 490                 my_buffer_offset += sprintf(my_base + my_buffer_offset,
 491                    "ARM_CKCTL_REG:            0x%-8x     \n"
 492                    "ARM_IDLECT1_REG:          0x%-8x     \n"
 493                    "ARM_IDLECT2_REG:          0x%-8x     \n"
 494                    "ARM_IDLECT3_REG:          0x%-8x     \n"
 495                    "ARM_EWUPCT_REG:           0x%-8x     \n"
 496                    "ARM_RSTCT1_REG:           0x%-8x     \n"
 497                    "ARM_RSTCT2_REG:           0x%-8x     \n"
 498                    "ARM_SYSST_REG:            0x%-8x     \n"
 499                    "ULPD_IT_STATUS_REG:       0x%-4x     \n"
 500                    "ULPD_CLOCK_CTRL_REG:      0x%-4x     \n"
 501                    "ULPD_SOFT_REQ_REG:        0x%-4x     \n"
 502                    "ULPD_DPLL_CTRL_REG:       0x%-4x     \n"
 503                    "ULPD_STATUS_REQ_REG:      0x%-4x     \n"
 504                    "ULPD_POWER_CTRL_REG:      0x%-4x     \n",
 505                    ARM_SHOW(ARM_CKCTL),
 506                    ARM_SHOW(ARM_IDLECT1),
 507                    ARM_SHOW(ARM_IDLECT2),
 508                    ARM_SHOW(ARM_IDLECT3),
 509                    ARM_SHOW(ARM_EWUPCT),
 510                    ARM_SHOW(ARM_RSTCT1),
 511                    ARM_SHOW(ARM_RSTCT2),
 512                    ARM_SHOW(ARM_SYSST),
 513                    ULPD_SHOW(ULPD_IT_STATUS),
 514                    ULPD_SHOW(ULPD_CLOCK_CTRL),
 515                    ULPD_SHOW(ULPD_SOFT_REQ),
 516                    ULPD_SHOW(ULPD_DPLL_CTRL),
 517                    ULPD_SHOW(ULPD_STATUS_REQ),
 518                    ULPD_SHOW(ULPD_POWER_CTRL));
 519
 520                 if (cpu_is_omap7xx()) {
 521                         my_buffer_offset += sprintf(my_base + my_buffer_offset,
 522                            "MPUI7XX_CTRL_REG         0x%-8x \n"
 523                            "MPUI7XX_DSP_STATUS_REG:      0x%-8x \n"
 524                            "MPUI7XX_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
 525                            "MPUI7XX_DSP_API_CONFIG_REG:  0x%-8x \n"
 526                            "MPUI7XX_SDRAM_CONFIG_REG:    0x%-8x \n"
 527                            "MPUI7XX_EMIFS_CONFIG_REG:    0x%-8x \n",
 528                            MPUI7XX_SHOW(MPUI_CTRL),
 529                            MPUI7XX_SHOW(MPUI_DSP_STATUS),
 530                            MPUI7XX_SHOW(MPUI_DSP_BOOT_CONFIG),
 531                            MPUI7XX_SHOW(MPUI_DSP_API_CONFIG),
 532                            MPUI7XX_SHOW(EMIFF_SDRAM_CONFIG),
 533                            MPUI7XX_SHOW(EMIFS_CONFIG));
 534                 } else if (cpu_is_omap15xx()) {
 535                         my_buffer_offset += sprintf(my_base + my_buffer_offset,
 536                            "MPUI1510_CTRL_REG             0x%-8x \n"
 537                            "MPUI1510_DSP_STATUS_REG:      0x%-8x \n"
 538                            "MPUI1510_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
 539                            "MPUI1510_DSP_API_CONFIG_REG:  0x%-8x \n"
 540                            "MPUI1510_SDRAM_CONFIG_REG:    0x%-8x \n"
 541                            "MPUI1510_EMIFS_CONFIG_REG:    0x%-8x \n",
 542                            MPUI1510_SHOW(MPUI_CTRL),
 543                            MPUI1510_SHOW(MPUI_DSP_STATUS),
 544                            MPUI1510_SHOW(MPUI_DSP_BOOT_CONFIG),
 545                            MPUI1510_SHOW(MPUI_DSP_API_CONFIG),
 546                            MPUI1510_SHOW(EMIFF_SDRAM_CONFIG),
 547                            MPUI1510_SHOW(EMIFS_CONFIG));
 548                 } else if (cpu_is_omap16xx()) {
 549                         my_buffer_offset += sprintf(my_base + my_buffer_offset,
 550                            "MPUI1610_CTRL_REG             0x%-8x \n"
 551                            "MPUI1610_DSP_STATUS_REG:      0x%-8x \n"
 552                            "MPUI1610_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
 553                            "MPUI1610_DSP_API_CONFIG_REG:  0x%-8x \n"
 554                            "MPUI1610_SDRAM_CONFIG_REG:    0x%-8x \n"
 555                            "MPUI1610_EMIFS_CONFIG_REG:    0x%-8x \n",
 556                            MPUI1610_SHOW(MPUI_CTRL),
 557                            MPUI1610_SHOW(MPUI_DSP_STATUS),
 558                            MPUI1610_SHOW(MPUI_DSP_BOOT_CONFIG),
 559                            MPUI1610_SHOW(MPUI_DSP_API_CONFIG),
 560                            MPUI1610_SHOW(EMIFF_SDRAM_CONFIG),
 561                            MPUI1610_SHOW(EMIFS_CONFIG));
 562                 }
 563
 564                 g_read_completed++;
 565         } else if (g_read_completed >= 1) {
 566                  *eof = 1;
 567                  return 0;
 568         }
 569         g_read_completed++;
 570
 571         *my_first_byte = page_buffer;
 572         return  my_buffer_offset;
 573 }
 574
 575 static void omap_pm_init_proc(void)
 576 {
 577         struct proc_dir_entry *entry;
 578
 579         entry = create_proc_read_entry("driver/omap_pm",
 580                                        S_IWUSR | S_IRUGO, NULL,
 581                                        omap_pm_read_proc, NULL);
 582 }
 583
 584 #endif /* DEBUG && CONFIG_PROC_FS */
 585
 586 static void (*saved_idle)(void) = NULL;
 587
 588 /*
 589  *      omap_pm_prepare - Do preliminary suspend work.
 590  *
 591  */
 592 static int omap_pm_prepare(void)
 593 {
 594         /* We cannot sleep in idle until we have resumed */
 595         saved_idle = pm_idle;
 596         pm_idle = NULL;
 597
 598         return 0;
 599 }
 600
 601
 602 /*
 603  *      omap_pm_enter - Actually enter a sleep state.
 604  *      @state:         State we're entering.
 605  *
 606  */
 607
 608 static int omap_pm_enter(suspend_state_t state)
 609 {
 610         switch (state)
 611         {
 612         case PM_SUSPEND_STANDBY:
 613         case PM_SUSPEND_MEM:
 614                 omap1_pm_suspend();
 615                 break;
 616         default:
 617                 return -EINVAL;
 618         }
 619
 620         return 0;
 621 }
 622
 623
 624 /**
 625  *      omap_pm_finish - Finish up suspend sequence.
 626  *
 627  *      This is called after we wake back up (or if entering the sleep state
 628  *      failed).
 629  */
 630
 631 static void omap_pm_finish(void)
 632 {
 633         pm_idle = saved_idle;
 634 }
 635
 636
 637 static irqreturn_t omap_wakeup_interrupt(int irq, void *dev)
 638 {
 639         return IRQ_HANDLED;
 640 }
 641
 642 static struct irqaction omap_wakeup_irq = {
 643         .name           = "peripheral wakeup",
 644         .flags          = IRQF_DISABLED,
 645         .handler        = omap_wakeup_interrupt
 646 };
 647
 648
 649
 650 static struct platform_suspend_ops omap_pm_ops ={
 651         .prepare        = omap_pm_prepare,
 652         .enter          = omap_pm_enter,
 653         .finish         = omap_pm_finish,
 654         .valid          = suspend_valid_only_mem,
 655 };
 656
 657 static int __init omap_pm_init(void)
 658 {
 659
 660 #ifdef CONFIG_OMAP_32K_TIMER
 661         int error;
 662 #endif
 663
 664         printk("Power Management for TI OMAP.\n");
 665
 666         /*
 667          * We copy the assembler sleep/wakeup routines to SRAM.
 668          * These routines need to be in SRAM as that's the only
 669          * memory the MPU can see when it wakes up.
 670          */
 671         if (cpu_is_omap7xx()) {
 672                 omap_sram_suspend = omap_sram_push(omap7xx_cpu_suspend,
 673                                                    omap7xx_cpu_suspend_sz);
 674         } else if (cpu_is_omap15xx()) {
 675                 omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend,
 676                                                    omap1510_cpu_suspend_sz);
 677         } else if (cpu_is_omap16xx()) {
 678                 omap_sram_suspend = omap_sram_push(omap1610_cpu_suspend,
 679                                                    omap1610_cpu_suspend_sz);
 680         }
 681
 682         if (omap_sram_suspend == NULL) {
 683                 printk(KERN_ERR "PM not initialized: Missing SRAM support\n");
 684                 return -ENODEV;
 685         }
 686
 687         pm_idle = omap1_pm_idle;
 688
 689         if (cpu_is_omap7xx())
 690                 setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq);
 691         else if (cpu_is_omap16xx())
 692                 setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq);
 693
 694         /* Program new power ramp-up time
 695          * (0 for most boards since we don't lower voltage when in deep sleep)
 696          */
 697         omap_writew(ULPD_SETUP_ANALOG_CELL_3_VAL, ULPD_SETUP_ANALOG_CELL_3);
 698
 699         /* Setup ULPD POWER_CTRL_REG - enter deep sleep whenever possible */
 700         omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL);
 701
 702         /* Configure IDLECT3 */
 703         if (cpu_is_omap7xx())
 704                 omap_writel(OMAP7XX_IDLECT3_VAL, OMAP7XX_IDLECT3);
 705         else if (cpu_is_omap16xx())
 706                 omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3);
 707
 708         suspend_set_ops(&omap_pm_ops);
 709
 710 #if defined(DEBUG) && defined(CONFIG_PROC_FS)
 711         omap_pm_init_proc();
 712 #endif
 713
 714 #ifdef CONFIG_OMAP_32K_TIMER
 715         error = sysfs_create_file(power_kobj, &sleep_while_idle_attr.attr);
 716         if (error)
 717                 printk(KERN_ERR "sysfs_create_file failed: %d\n", error);
 718 #endif
 719
 720         if (cpu_is_omap16xx()) {
 721                 /* configure LOW_PWR pin */
 722                 omap_cfg_reg(T20_1610_LOW_PWR);
 723         }
 724
 725         return 0;
 726 }
 727 __initcall(omap_pm_init);