OMAP3: SR: Reset voltage level on SR disable
[linux-ginger.git] / arch / arm / mach-orion5x / mpp.c
blobbc4c3b9aaf83346fc054b5cb23eb19287b3e2fc0
1 /*
2 * arch/arm/mach-orion5x/mpp.c
4 * MPP functions for Marvell Orion 5x SoCs
6 * This file is licensed under the terms of the GNU General Public
7 * License version 2. This program is licensed "as is" without any
8 * warranty of any kind, whether express or implied.
9 */
11 #include <linux/kernel.h>
12 #include <linux/init.h>
13 #include <linux/mbus.h>
14 #include <linux/io.h>
15 #include <asm/gpio.h>
16 #include <mach/hardware.h>
17 #include "common.h"
18 #include "mpp.h"
20 static int is_5181l(void)
22 u32 dev;
23 u32 rev;
25 orion5x_pcie_id(&dev, &rev);
27 return !!(dev == MV88F5181_DEV_ID && rev >= MV88F5181L_REV_A0);
30 static int is_5182(void)
32 u32 dev;
33 u32 rev;
35 orion5x_pcie_id(&dev, &rev);
37 return !!(dev == MV88F5182_DEV_ID);
40 static int is_5281(void)
42 u32 dev;
43 u32 rev;
45 orion5x_pcie_id(&dev, &rev);
47 return !!(dev == MV88F5281_DEV_ID);
50 static int __init determine_type_encoding(int mpp, enum orion5x_mpp_type type)
52 switch (type) {
53 case MPP_UNUSED:
54 case MPP_GPIO:
55 if (mpp == 0)
56 return 3;
57 if (mpp >= 1 && mpp <= 15)
58 return 0;
59 if (mpp >= 16 && mpp <= 19) {
60 if (is_5182())
61 return 5;
62 if (type == MPP_UNUSED)
63 return 0;
65 return -1;
67 case MPP_PCIE_RST_OUTn:
68 if (mpp == 0)
69 return 0;
70 return -1;
72 case MPP_PCI_ARB:
73 if (mpp >= 0 && mpp <= 7)
74 return 2;
75 return -1;
77 case MPP_PCI_PMEn:
78 if (mpp == 2)
79 return 3;
80 return -1;
82 case MPP_GIGE:
83 if (mpp >= 8 && mpp <= 19)
84 return 1;
85 return -1;
87 case MPP_NAND:
88 if (is_5182() || is_5281()) {
89 if (mpp >= 4 && mpp <= 7)
90 return 4;
91 if (mpp >= 12 && mpp <= 17)
92 return 4;
94 return -1;
96 case MPP_PCI_CLK:
97 if (is_5181l() && mpp >= 6 && mpp <= 7)
98 return 5;
99 return -1;
101 case MPP_SATA_LED:
102 if (is_5182()) {
103 if (mpp >= 4 && mpp <= 7)
104 return 5;
105 if (mpp >= 12 && mpp <= 15)
106 return 5;
108 return -1;
110 case MPP_UART:
111 if (mpp >= 16 && mpp <= 19)
112 return 0;
113 return -1;
116 printk(KERN_INFO "unknown MPP type %d\n", type);
118 return -1;
121 void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode)
123 u32 mpp_0_7_ctrl = readl(MPP_0_7_CTRL);
124 u32 mpp_8_15_ctrl = readl(MPP_8_15_CTRL);
125 u32 mpp_16_19_ctrl = readl(MPP_16_19_CTRL);
127 /* Initialize gpiolib. */
128 orion_gpio_init();
130 while (mode->mpp >= 0) {
131 u32 *reg;
132 int num_type;
133 int shift;
135 if (mode->mpp >= 0 && mode->mpp <= 7)
136 reg = &mpp_0_7_ctrl;
137 else if (mode->mpp >= 8 && mode->mpp <= 15)
138 reg = &mpp_8_15_ctrl;
139 else if (mode->mpp >= 16 && mode->mpp <= 19)
140 reg = &mpp_16_19_ctrl;
141 else {
142 printk(KERN_ERR "orion5x_mpp_conf: invalid MPP "
143 "(%d)\n", mode->mpp);
144 continue;
147 num_type = determine_type_encoding(mode->mpp, mode->type);
148 if (num_type < 0) {
149 printk(KERN_ERR "orion5x_mpp_conf: invalid MPP "
150 "combination (%d, %d)\n", mode->mpp,
151 mode->type);
152 continue;
155 shift = (mode->mpp & 7) << 2;
156 *reg &= ~(0xf << shift);
157 *reg |= (num_type & 0xf) << shift;
159 if (mode->type == MPP_UNUSED && (mode->mpp < 16 || is_5182()))
160 orion_gpio_set_unused(mode->mpp);
162 orion_gpio_set_valid(mode->mpp, !!(mode->type == MPP_GPIO));
164 mode++;
167 writel(mpp_0_7_ctrl, MPP_0_7_CTRL);
168 writel(mpp_8_15_ctrl, MPP_8_15_CTRL);
169 writel(mpp_16_19_ctrl, MPP_16_19_CTRL);