OMAP3: SR: Reset voltage level on SR disable
[linux-ginger.git] / arch / arm / mach-orion5x / rd88f5181l-fxo-setup.c
blob9c1ca41730ba4fc00d248029dedfb0d7bc8d8417
1 /*
2 * arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
4 * Marvell Orion-VoIP FXO Reference Design Setup
6 * This file is licensed under the terms of the GNU General Public
7 * License version 2. This program is licensed "as is" without any
8 * warranty of any kind, whether express or implied.
9 */
11 #include <linux/kernel.h>
12 #include <linux/init.h>
13 #include <linux/platform_device.h>
14 #include <linux/pci.h>
15 #include <linux/irq.h>
16 #include <linux/mtd/physmap.h>
17 #include <linux/mv643xx_eth.h>
18 #include <linux/ethtool.h>
19 #include <net/dsa.h>
20 #include <asm/mach-types.h>
21 #include <asm/gpio.h>
22 #include <asm/leds.h>
23 #include <asm/mach/arch.h>
24 #include <asm/mach/pci.h>
25 #include <mach/orion5x.h>
26 #include "common.h"
27 #include "mpp.h"
29 /*****************************************************************************
30 * RD-88F5181L FXO Info
31 ****************************************************************************/
33 * 8M NOR flash Device bus boot chip select
35 #define RD88F5181L_FXO_NOR_BOOT_BASE 0xff800000
36 #define RD88F5181L_FXO_NOR_BOOT_SIZE SZ_8M
39 /*****************************************************************************
40 * 8M NOR Flash on Device bus Boot chip select
41 ****************************************************************************/
42 static struct physmap_flash_data rd88f5181l_fxo_nor_boot_flash_data = {
43 .width = 1,
46 static struct resource rd88f5181l_fxo_nor_boot_flash_resource = {
47 .flags = IORESOURCE_MEM,
48 .start = RD88F5181L_FXO_NOR_BOOT_BASE,
49 .end = RD88F5181L_FXO_NOR_BOOT_BASE +
50 RD88F5181L_FXO_NOR_BOOT_SIZE - 1,
53 static struct platform_device rd88f5181l_fxo_nor_boot_flash = {
54 .name = "physmap-flash",
55 .id = 0,
56 .dev = {
57 .platform_data = &rd88f5181l_fxo_nor_boot_flash_data,
59 .num_resources = 1,
60 .resource = &rd88f5181l_fxo_nor_boot_flash_resource,
64 /*****************************************************************************
65 * General Setup
66 ****************************************************************************/
67 static struct orion5x_mpp_mode rd88f5181l_fxo_mpp_modes[] __initdata = {
68 { 0, MPP_GPIO }, /* LED1 CardBus LED (front panel) */
69 { 1, MPP_GPIO }, /* PCI_intA */
70 { 2, MPP_GPIO }, /* Hard Reset / Factory Init*/
71 { 3, MPP_GPIO }, /* FXS or DAA select */
72 { 4, MPP_GPIO }, /* LED6 - phone LED (front panel) */
73 { 5, MPP_GPIO }, /* LED5 - phone LED (front panel) */
74 { 6, MPP_PCI_CLK }, /* CPU PCI refclk */
75 { 7, MPP_PCI_CLK }, /* PCI/PCIe refclk */
76 { 8, MPP_GPIO }, /* CardBus reset */
77 { 9, MPP_GPIO }, /* GE_RXERR */
78 { 10, MPP_GPIO }, /* LED2 MiniPCI LED (front panel) */
79 { 11, MPP_GPIO }, /* Lifeline control */
80 { 12, MPP_GIGE }, /* GE_TXD[4] */
81 { 13, MPP_GIGE }, /* GE_TXD[5] */
82 { 14, MPP_GIGE }, /* GE_TXD[6] */
83 { 15, MPP_GIGE }, /* GE_TXD[7] */
84 { 16, MPP_GIGE }, /* GE_RXD[4] */
85 { 17, MPP_GIGE }, /* GE_RXD[5] */
86 { 18, MPP_GIGE }, /* GE_RXD[6] */
87 { 19, MPP_GIGE }, /* GE_RXD[7] */
88 { -1 },
91 static struct mv643xx_eth_platform_data rd88f5181l_fxo_eth_data = {
92 .phy_addr = MV643XX_ETH_PHY_NONE,
93 .speed = SPEED_1000,
94 .duplex = DUPLEX_FULL,
97 static struct dsa_chip_data rd88f5181l_fxo_switch_chip_data = {
98 .port_names[0] = "lan2",
99 .port_names[1] = "lan1",
100 .port_names[2] = "wan",
101 .port_names[3] = "cpu",
102 .port_names[5] = "lan4",
103 .port_names[7] = "lan3",
106 static struct dsa_platform_data rd88f5181l_fxo_switch_plat_data = {
107 .nr_chips = 1,
108 .chip = &rd88f5181l_fxo_switch_chip_data,
111 static void __init rd88f5181l_fxo_init(void)
114 * Setup basic Orion functions. Need to be called early.
116 orion5x_init();
118 orion5x_mpp_conf(rd88f5181l_fxo_mpp_modes);
121 * Configure peripherals.
123 orion5x_ehci0_init();
124 orion5x_eth_init(&rd88f5181l_fxo_eth_data);
125 orion5x_eth_switch_init(&rd88f5181l_fxo_switch_plat_data, NO_IRQ);
126 orion5x_uart0_init();
128 orion5x_setup_dev_boot_win(RD88F5181L_FXO_NOR_BOOT_BASE,
129 RD88F5181L_FXO_NOR_BOOT_SIZE);
130 platform_device_register(&rd88f5181l_fxo_nor_boot_flash);
133 static int __init
134 rd88f5181l_fxo_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
136 int irq;
139 * Check for devices with hard-wired IRQs.
141 irq = orion5x_pci_map_irq(dev, slot, pin);
142 if (irq != -1)
143 return irq;
146 * Mini-PCI / Cardbus slot.
148 return gpio_to_irq(1);
151 static struct hw_pci rd88f5181l_fxo_pci __initdata = {
152 .nr_controllers = 2,
153 .swizzle = pci_std_swizzle,
154 .setup = orion5x_pci_sys_setup,
155 .scan = orion5x_pci_sys_scan_bus,
156 .map_irq = rd88f5181l_fxo_pci_map_irq,
159 static int __init rd88f5181l_fxo_pci_init(void)
161 if (machine_is_rd88f5181l_fxo()) {
162 orion5x_pci_set_cardbus_mode();
163 pci_common_init(&rd88f5181l_fxo_pci);
166 return 0;
168 subsys_initcall(rd88f5181l_fxo_pci_init);
170 MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design")
171 /* Maintainer: Nicolas Pitre <nico@marvell.com> */
172 .phys_io = ORION5X_REGS_PHYS_BASE,
173 .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
174 .boot_params = 0x00000100,
175 .init_machine = rd88f5181l_fxo_init,
176 .map_io = orion5x_map_io,
177 .init_irq = orion5x_init_irq,
178 .timer = &orion5x_timer,
179 .fixup = tag_fixup_mem32,
180 MACHINE_END