[ARM] Merge most of the PXA work for initial merge
[linux-ginger.git] / drivers / sbus / char / display7seg.c
blob3279a1b6501d6b2f5c108ecfbc73c91bd293f0f6
1 /* $Id: display7seg.c,v 1.6 2002/01/08 16:00:16 davem Exp $
3 * display7seg - Driver implementation for the 7-segment display
4 * present on Sun Microsystems CP1400 and CP1500
6 * Copyright (c) 2000 Eric Brower (ebrower@usa.net)
8 */
10 #include <linux/kernel.h>
11 #include <linux/module.h>
12 #include <linux/fs.h>
13 #include <linux/errno.h>
14 #include <linux/major.h>
15 #include <linux/init.h>
16 #include <linux/miscdevice.h>
17 #include <linux/ioport.h> /* request_region */
18 #include <linux/smp_lock.h>
19 #include <asm/atomic.h>
20 #include <asm/ebus.h> /* EBus device */
21 #include <asm/oplib.h> /* OpenProm Library */
22 #include <asm/uaccess.h> /* put_/get_user */
23 #include <asm/io.h>
25 #include <asm/display7seg.h>
27 #define D7S_MINOR 193
28 #define D7S_OBPNAME "display7seg"
29 #define D7S_DEVNAME "d7s"
31 static int sol_compat = 0; /* Solaris compatibility mode */
33 #ifdef MODULE
35 /* Solaris compatibility flag -
36 * The Solaris implementation omits support for several
37 * documented driver features (ref Sun doc 806-0180-03).
38 * By default, this module supports the documented driver
39 * abilities, rather than the Solaris implementation:
41 * 1) Device ALWAYS reverts to OBP-specified FLIPPED mode
42 * upon closure of device or module unload.
43 * 2) Device ioctls D7SIOCRD/D7SIOCWR honor toggling of
44 * FLIP bit
46 * If you wish the device to operate as under Solaris,
47 * omitting above features, set this parameter to non-zero.
49 module_param
50 (sol_compat, int, 0);
51 MODULE_PARM_DESC
52 (sol_compat,
53 "Disables documented functionality omitted from Solaris driver");
55 MODULE_AUTHOR
56 ("Eric Brower <ebrower@usa.net>");
57 MODULE_DESCRIPTION
58 ("7-Segment Display driver for Sun Microsystems CP1400/1500");
59 MODULE_LICENSE("GPL");
60 MODULE_SUPPORTED_DEVICE
61 ("d7s");
62 #endif /* ifdef MODULE */
65 * Register block address- see header for details
66 * -----------------------------------------
67 * | DP | ALARM | FLIP | 4 | 3 | 2 | 1 | 0 |
68 * -----------------------------------------
70 * DP - Toggles decimal point on/off
71 * ALARM - Toggles "Alarm" LED green/red
72 * FLIP - Inverts display for upside-down mounted board
73 * bits 0-4 - 7-segment display contents
75 static void __iomem* d7s_regs;
77 static inline void d7s_free(void)
79 iounmap(d7s_regs);
82 static inline int d7s_obpflipped(void)
84 int opt_node;
86 opt_node = prom_getchild(prom_root_node);
87 opt_node = prom_searchsiblings(opt_node, "options");
88 return ((-1 != prom_getintdefault(opt_node, "d7s-flipped?", -1)) ? 0 : 1);
91 static atomic_t d7s_users = ATOMIC_INIT(0);
93 static int d7s_open(struct inode *inode, struct file *f)
95 if (D7S_MINOR != iminor(inode))
96 return -ENODEV;
97 atomic_inc(&d7s_users);
98 return 0;
101 static int d7s_release(struct inode *inode, struct file *f)
103 /* Reset flipped state to OBP default only if
104 * no other users have the device open and we
105 * are not operating in solaris-compat mode
107 if (atomic_dec_and_test(&d7s_users) && !sol_compat) {
108 int regval = 0;
110 regval = readb(d7s_regs);
111 (0 == d7s_obpflipped()) ?
112 writeb(regval |= D7S_FLIP, d7s_regs):
113 writeb(regval &= ~D7S_FLIP, d7s_regs);
116 return 0;
119 static long d7s_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
121 __u8 regs = readb(d7s_regs);
122 __u8 ireg = 0;
123 int error = 0;
125 if (D7S_MINOR != iminor(file->f_path.dentry->d_inode))
126 return -ENODEV;
128 lock_kernel();
129 switch (cmd) {
130 case D7SIOCWR:
131 /* assign device register values
132 * we mask-out D7S_FLIP if in sol_compat mode
134 if (get_user(ireg, (int __user *) arg)) {
135 error = -EFAULT;
136 break;
138 if (0 != sol_compat) {
139 (regs & D7S_FLIP) ?
140 (ireg |= D7S_FLIP) : (ireg &= ~D7S_FLIP);
142 writeb(ireg, d7s_regs);
143 break;
145 case D7SIOCRD:
146 /* retrieve device register values
147 * NOTE: Solaris implementation returns D7S_FLIP bit
148 * as toggled by user, even though it does not honor it.
149 * This driver will not misinform you about the state
150 * of your hardware while in sol_compat mode
152 if (put_user(regs, (int __user *) arg)) {
153 error = -EFAULT;
154 break;
156 break;
158 case D7SIOCTM:
159 /* toggle device mode-- flip display orientation */
160 (regs & D7S_FLIP) ?
161 (regs &= ~D7S_FLIP) : (regs |= D7S_FLIP);
162 writeb(regs, d7s_regs);
163 break;
165 unlock_kernel();
167 return error;
170 static const struct file_operations d7s_fops = {
171 .owner = THIS_MODULE,
172 .unlocked_ioctl = d7s_ioctl,
173 .compat_ioctl = d7s_ioctl,
174 .open = d7s_open,
175 .release = d7s_release,
178 static struct miscdevice d7s_miscdev = { D7S_MINOR, D7S_DEVNAME, &d7s_fops };
180 static int __init d7s_init(void)
182 struct linux_ebus *ebus = NULL;
183 struct linux_ebus_device *edev = NULL;
184 int iTmp = 0, regs = 0;
186 for_each_ebus(ebus) {
187 for_each_ebusdev(edev, ebus) {
188 if (!strcmp(edev->prom_node->name, D7S_OBPNAME))
189 goto ebus_done;
193 ebus_done:
194 if(!edev) {
195 printk("%s: unable to locate device\n", D7S_DEVNAME);
196 return -ENODEV;
199 d7s_regs = ioremap(edev->resource[0].start, sizeof(__u8));
201 iTmp = misc_register(&d7s_miscdev);
202 if (0 != iTmp) {
203 printk("%s: unable to acquire miscdevice minor %i\n",
204 D7S_DEVNAME, D7S_MINOR);
205 iounmap(d7s_regs);
206 return iTmp;
209 /* OBP option "d7s-flipped?" is honored as default
210 * for the device, and reset default when detached
212 regs = readb(d7s_regs);
213 iTmp = d7s_obpflipped();
214 (0 == iTmp) ?
215 writeb(regs |= D7S_FLIP, d7s_regs):
216 writeb(regs &= ~D7S_FLIP, d7s_regs);
218 printk("%s: 7-Segment Display%s at 0x%lx %s\n",
219 D7S_DEVNAME,
220 (0 == iTmp) ? (" (FLIPPED)") : (""),
221 edev->resource[0].start,
222 (0 != sol_compat) ? ("in sol_compat mode") : (""));
224 return 0;
227 static void __exit d7s_cleanup(void)
229 int regs = readb(d7s_regs);
231 /* Honor OBP d7s-flipped? unless operating in solaris-compat mode */
232 if (0 == sol_compat) {
233 (0 == d7s_obpflipped()) ?
234 writeb(regs |= D7S_FLIP, d7s_regs):
235 writeb(regs &= ~D7S_FLIP, d7s_regs);
238 misc_deregister(&d7s_miscdev);
239 d7s_free();
242 module_init(d7s_init);
243 module_exit(d7s_cleanup);