2 * usbmidi.c - ALSA USB MIDI driver
4 * Copyright (c) 2002-2007 Clemens Ladisch
7 * Based on the OSS usb-midi driver by NAGANO Daisuke,
8 * NetBSD's umidi driver by Takuya SHIOZAKI,
9 * the "USB Device Class Definition for MIDI Devices" by Roland
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. The name of the author may not be used to endorse or promote products
18 * derived from this software without specific prior written permission.
20 * Alternatively, this software may be distributed and/or modified under the
21 * terms of the GNU General Public License as published by the Free Software
22 * Foundation; either version 2 of the License, or (at your option) any later
25 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
26 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
27 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
28 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
29 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
30 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
31 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
32 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
33 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
34 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
38 #include <linux/kernel.h>
39 #include <linux/types.h>
40 #include <linux/bitops.h>
41 #include <linux/interrupt.h>
42 #include <linux/spinlock.h>
43 #include <linux/string.h>
44 #include <linux/init.h>
45 #include <linux/slab.h>
46 #include <linux/timer.h>
47 #include <linux/usb.h>
48 #include <linux/wait.h>
49 #include <sound/core.h>
50 #include <sound/rawmidi.h>
51 #include <sound/asequencer.h>
56 * define this to log all USB packets
58 /* #define DUMP_PACKETS */
61 * how long to wait after some USB errors, so that khubd can disconnect() us
62 * without too many spurious errors
64 #define ERROR_DELAY_JIFFIES (HZ / 10)
70 MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
71 MODULE_DESCRIPTION("USB Audio/MIDI helper module");
72 MODULE_LICENSE("Dual BSD/GPL");
75 struct usb_ms_header_descriptor
{
78 __u8 bDescriptorSubtype
;
81 } __attribute__ ((packed
));
83 struct usb_ms_endpoint_descriptor
{
86 __u8 bDescriptorSubtype
;
88 __u8 baAssocJackID
[0];
89 } __attribute__ ((packed
));
91 struct snd_usb_midi_in_endpoint
;
92 struct snd_usb_midi_out_endpoint
;
93 struct snd_usb_midi_endpoint
;
95 struct usb_protocol_ops
{
96 void (*input
)(struct snd_usb_midi_in_endpoint
*, uint8_t*, int);
97 void (*output
)(struct snd_usb_midi_out_endpoint
*ep
, struct urb
*urb
);
98 void (*output_packet
)(struct urb
*, uint8_t, uint8_t, uint8_t, uint8_t);
99 void (*init_out_endpoint
)(struct snd_usb_midi_out_endpoint
*);
100 void (*finish_out_endpoint
)(struct snd_usb_midi_out_endpoint
*);
103 struct snd_usb_midi
{
104 struct snd_usb_audio
*chip
;
105 struct usb_interface
*iface
;
106 const struct snd_usb_audio_quirk
*quirk
;
107 struct snd_rawmidi
*rmidi
;
108 struct usb_protocol_ops
* usb_protocol_ops
;
109 struct list_head list
;
110 struct timer_list error_timer
;
111 spinlock_t disc_lock
;
113 struct snd_usb_midi_endpoint
{
114 struct snd_usb_midi_out_endpoint
*out
;
115 struct snd_usb_midi_in_endpoint
*in
;
116 } endpoints
[MIDI_MAX_ENDPOINTS
];
117 unsigned long input_triggered
;
118 unsigned char disconnected
;
121 struct snd_usb_midi_out_endpoint
{
122 struct snd_usb_midi
* umidi
;
123 struct out_urb_context
{
125 struct snd_usb_midi_out_endpoint
*ep
;
127 unsigned int active_urbs
;
128 unsigned int drain_urbs
;
129 int max_transfer
; /* size of urb buffer */
130 struct tasklet_struct tasklet
;
131 unsigned int next_urb
;
132 spinlock_t buffer_lock
;
134 struct usbmidi_out_port
{
135 struct snd_usb_midi_out_endpoint
* ep
;
136 struct snd_rawmidi_substream
*substream
;
138 uint8_t cable
; /* cable number << 4 */
140 #define STATE_UNKNOWN 0
141 #define STATE_1PARAM 1
142 #define STATE_2PARAM_1 2
143 #define STATE_2PARAM_2 3
144 #define STATE_SYSEX_0 4
145 #define STATE_SYSEX_1 5
146 #define STATE_SYSEX_2 6
151 wait_queue_head_t drain_wait
;
154 struct snd_usb_midi_in_endpoint
{
155 struct snd_usb_midi
* umidi
;
156 struct urb
* urbs
[INPUT_URBS
];
157 struct usbmidi_in_port
{
158 struct snd_rawmidi_substream
*substream
;
159 u8 running_status_length
;
166 static void snd_usbmidi_do_output(struct snd_usb_midi_out_endpoint
* ep
);
168 static const uint8_t snd_usbmidi_cin_length
[] = {
169 0, 0, 2, 3, 3, 1, 2, 3, 3, 3, 3, 3, 2, 2, 3, 1
173 * Submits the URB, with error handling.
175 static int snd_usbmidi_submit_urb(struct urb
* urb
, gfp_t flags
)
177 int err
= usb_submit_urb(urb
, flags
);
178 if (err
< 0 && err
!= -ENODEV
)
179 snd_printk(KERN_ERR
"usb_submit_urb: %d\n", err
);
184 * Error handling for URB completion functions.
186 static int snd_usbmidi_urb_error(int status
)
189 /* manually unlinked, or device gone */
195 /* errors that might occur during unplugging */
201 snd_printk(KERN_ERR
"urb status %d\n", status
);
202 return 0; /* continue */
207 * Receives a chunk of MIDI data.
209 static void snd_usbmidi_input_data(struct snd_usb_midi_in_endpoint
* ep
, int portidx
,
210 uint8_t* data
, int length
)
212 struct usbmidi_in_port
* port
= &ep
->ports
[portidx
];
214 if (!port
->substream
) {
215 snd_printd("unexpected port %d!\n", portidx
);
218 if (!test_bit(port
->substream
->number
, &ep
->umidi
->input_triggered
))
220 snd_rawmidi_receive(port
->substream
, data
, length
);
224 static void dump_urb(const char *type
, const u8
*data
, int length
)
226 snd_printk(KERN_DEBUG
"%s packet: [", type
);
227 for (; length
> 0; ++data
, --length
)
228 printk(" %02x", *data
);
232 #define dump_urb(type, data, length) /* nothing */
236 * Processes the data read from the device.
238 static void snd_usbmidi_in_urb_complete(struct urb
* urb
)
240 struct snd_usb_midi_in_endpoint
* ep
= urb
->context
;
242 if (urb
->status
== 0) {
243 dump_urb("received", urb
->transfer_buffer
, urb
->actual_length
);
244 ep
->umidi
->usb_protocol_ops
->input(ep
, urb
->transfer_buffer
,
247 int err
= snd_usbmidi_urb_error(urb
->status
);
249 if (err
!= -ENODEV
) {
250 ep
->error_resubmit
= 1;
251 mod_timer(&ep
->umidi
->error_timer
,
252 jiffies
+ ERROR_DELAY_JIFFIES
);
258 urb
->dev
= ep
->umidi
->chip
->dev
;
259 snd_usbmidi_submit_urb(urb
, GFP_ATOMIC
);
262 static void snd_usbmidi_out_urb_complete(struct urb
* urb
)
264 struct out_urb_context
*context
= urb
->context
;
265 struct snd_usb_midi_out_endpoint
* ep
= context
->ep
;
266 unsigned int urb_index
;
268 spin_lock(&ep
->buffer_lock
);
269 urb_index
= context
- ep
->urbs
;
270 ep
->active_urbs
&= ~(1 << urb_index
);
271 if (unlikely(ep
->drain_urbs
)) {
272 ep
->drain_urbs
&= ~(1 << urb_index
);
273 wake_up(&ep
->drain_wait
);
275 spin_unlock(&ep
->buffer_lock
);
276 if (urb
->status
< 0) {
277 int err
= snd_usbmidi_urb_error(urb
->status
);
280 mod_timer(&ep
->umidi
->error_timer
,
281 jiffies
+ ERROR_DELAY_JIFFIES
);
285 snd_usbmidi_do_output(ep
);
289 * This is called when some data should be transferred to the device
290 * (from one or more substreams).
292 static void snd_usbmidi_do_output(struct snd_usb_midi_out_endpoint
* ep
)
294 unsigned int urb_index
;
298 spin_lock_irqsave(&ep
->buffer_lock
, flags
);
299 if (ep
->umidi
->chip
->shutdown
) {
300 spin_unlock_irqrestore(&ep
->buffer_lock
, flags
);
304 urb_index
= ep
->next_urb
;
306 if (!(ep
->active_urbs
& (1 << urb_index
))) {
307 urb
= ep
->urbs
[urb_index
].urb
;
308 urb
->transfer_buffer_length
= 0;
309 ep
->umidi
->usb_protocol_ops
->output(ep
, urb
);
310 if (urb
->transfer_buffer_length
== 0)
313 dump_urb("sending", urb
->transfer_buffer
,
314 urb
->transfer_buffer_length
);
315 urb
->dev
= ep
->umidi
->chip
->dev
;
316 if (snd_usbmidi_submit_urb(urb
, GFP_ATOMIC
) < 0)
318 ep
->active_urbs
|= 1 << urb_index
;
320 if (++urb_index
>= OUTPUT_URBS
)
322 if (urb_index
== ep
->next_urb
)
325 ep
->next_urb
= urb_index
;
326 spin_unlock_irqrestore(&ep
->buffer_lock
, flags
);
329 static void snd_usbmidi_out_tasklet(unsigned long data
)
331 struct snd_usb_midi_out_endpoint
* ep
= (struct snd_usb_midi_out_endpoint
*) data
;
333 snd_usbmidi_do_output(ep
);
336 /* called after transfers had been interrupted due to some USB error */
337 static void snd_usbmidi_error_timer(unsigned long data
)
339 struct snd_usb_midi
*umidi
= (struct snd_usb_midi
*)data
;
342 spin_lock(&umidi
->disc_lock
);
343 if (umidi
->disconnected
) {
344 spin_unlock(&umidi
->disc_lock
);
347 for (i
= 0; i
< MIDI_MAX_ENDPOINTS
; ++i
) {
348 struct snd_usb_midi_in_endpoint
*in
= umidi
->endpoints
[i
].in
;
349 if (in
&& in
->error_resubmit
) {
350 in
->error_resubmit
= 0;
351 for (j
= 0; j
< INPUT_URBS
; ++j
) {
352 in
->urbs
[j
]->dev
= umidi
->chip
->dev
;
353 snd_usbmidi_submit_urb(in
->urbs
[j
], GFP_ATOMIC
);
356 if (umidi
->endpoints
[i
].out
)
357 snd_usbmidi_do_output(umidi
->endpoints
[i
].out
);
359 spin_unlock(&umidi
->disc_lock
);
362 /* helper function to send static data that may not DMA-able */
363 static int send_bulk_static_data(struct snd_usb_midi_out_endpoint
* ep
,
364 const void *data
, int len
)
367 void *buf
= kmemdup(data
, len
, GFP_KERNEL
);
370 dump_urb("sending", buf
, len
);
372 err
= usb_bulk_msg(ep
->umidi
->chip
->dev
, ep
->urbs
[0].urb
->pipe
,
373 buf
, len
, NULL
, 250);
379 * Standard USB MIDI protocol: see the spec.
380 * Midiman protocol: like the standard protocol, but the control byte is the
381 * fourth byte in each packet, and uses length instead of CIN.
384 static void snd_usbmidi_standard_input(struct snd_usb_midi_in_endpoint
* ep
,
385 uint8_t* buffer
, int buffer_length
)
389 for (i
= 0; i
+ 3 < buffer_length
; i
+= 4)
390 if (buffer
[i
] != 0) {
391 int cable
= buffer
[i
] >> 4;
392 int length
= snd_usbmidi_cin_length
[buffer
[i
] & 0x0f];
393 snd_usbmidi_input_data(ep
, cable
, &buffer
[i
+ 1], length
);
397 static void snd_usbmidi_midiman_input(struct snd_usb_midi_in_endpoint
* ep
,
398 uint8_t* buffer
, int buffer_length
)
402 for (i
= 0; i
+ 3 < buffer_length
; i
+= 4)
403 if (buffer
[i
+ 3] != 0) {
404 int port
= buffer
[i
+ 3] >> 4;
405 int length
= buffer
[i
+ 3] & 3;
406 snd_usbmidi_input_data(ep
, port
, &buffer
[i
], length
);
411 * Buggy M-Audio device: running status on input results in a packet that has
412 * the data bytes but not the status byte and that is marked with CIN 4.
414 static void snd_usbmidi_maudio_broken_running_status_input(
415 struct snd_usb_midi_in_endpoint
* ep
,
416 uint8_t* buffer
, int buffer_length
)
420 for (i
= 0; i
+ 3 < buffer_length
; i
+= 4)
421 if (buffer
[i
] != 0) {
422 int cable
= buffer
[i
] >> 4;
423 u8 cin
= buffer
[i
] & 0x0f;
424 struct usbmidi_in_port
*port
= &ep
->ports
[cable
];
427 length
= snd_usbmidi_cin_length
[cin
];
428 if (cin
== 0xf && buffer
[i
+ 1] >= 0xf8)
429 ; /* realtime msg: no running status change */
430 else if (cin
>= 0x8 && cin
<= 0xe)
432 port
->running_status_length
= length
- 1;
433 else if (cin
== 0x4 &&
434 port
->running_status_length
!= 0 &&
435 buffer
[i
+ 1] < 0x80)
436 /* CIN 4 that is not a SysEx */
437 length
= port
->running_status_length
;
440 * All other msgs cannot begin running status.
441 * (A channel msg sent as two or three CIN 0xF
442 * packets could in theory, but this device
443 * doesn't use this format.)
445 port
->running_status_length
= 0;
446 snd_usbmidi_input_data(ep
, cable
, &buffer
[i
+ 1], length
);
451 * CME protocol: like the standard protocol, but SysEx commands are sent as a
452 * single USB packet preceded by a 0x0F byte.
454 static void snd_usbmidi_cme_input(struct snd_usb_midi_in_endpoint
*ep
,
455 uint8_t *buffer
, int buffer_length
)
457 if (buffer_length
< 2 || (buffer
[0] & 0x0f) != 0x0f)
458 snd_usbmidi_standard_input(ep
, buffer
, buffer_length
);
460 snd_usbmidi_input_data(ep
, buffer
[0] >> 4,
461 &buffer
[1], buffer_length
- 1);
465 * Adds one USB MIDI packet to the output buffer.
467 static void snd_usbmidi_output_standard_packet(struct urb
* urb
, uint8_t p0
,
468 uint8_t p1
, uint8_t p2
, uint8_t p3
)
471 uint8_t* buf
= (uint8_t*)urb
->transfer_buffer
+ urb
->transfer_buffer_length
;
476 urb
->transfer_buffer_length
+= 4;
480 * Adds one Midiman packet to the output buffer.
482 static void snd_usbmidi_output_midiman_packet(struct urb
* urb
, uint8_t p0
,
483 uint8_t p1
, uint8_t p2
, uint8_t p3
)
486 uint8_t* buf
= (uint8_t*)urb
->transfer_buffer
+ urb
->transfer_buffer_length
;
490 buf
[3] = (p0
& 0xf0) | snd_usbmidi_cin_length
[p0
& 0x0f];
491 urb
->transfer_buffer_length
+= 4;
495 * Converts MIDI commands to USB MIDI packets.
497 static void snd_usbmidi_transmit_byte(struct usbmidi_out_port
* port
,
498 uint8_t b
, struct urb
* urb
)
500 uint8_t p0
= port
->cable
;
501 void (*output_packet
)(struct urb
*, uint8_t, uint8_t, uint8_t, uint8_t) =
502 port
->ep
->umidi
->usb_protocol_ops
->output_packet
;
505 output_packet(urb
, p0
| 0x0f, b
, 0, 0);
506 } else if (b
>= 0xf0) {
510 port
->state
= STATE_SYSEX_1
;
515 port
->state
= STATE_1PARAM
;
519 port
->state
= STATE_2PARAM_1
;
523 port
->state
= STATE_UNKNOWN
;
526 output_packet(urb
, p0
| 0x05, 0xf6, 0, 0);
527 port
->state
= STATE_UNKNOWN
;
530 switch (port
->state
) {
532 output_packet(urb
, p0
| 0x05, 0xf7, 0, 0);
535 output_packet(urb
, p0
| 0x06, port
->data
[0], 0xf7, 0);
538 output_packet(urb
, p0
| 0x07, port
->data
[0], port
->data
[1], 0xf7);
541 port
->state
= STATE_UNKNOWN
;
544 } else if (b
>= 0x80) {
546 if (b
>= 0xc0 && b
<= 0xdf)
547 port
->state
= STATE_1PARAM
;
549 port
->state
= STATE_2PARAM_1
;
550 } else { /* b < 0x80 */
551 switch (port
->state
) {
553 if (port
->data
[0] < 0xf0) {
554 p0
|= port
->data
[0] >> 4;
557 port
->state
= STATE_UNKNOWN
;
559 output_packet(urb
, p0
, port
->data
[0], b
, 0);
563 port
->state
= STATE_2PARAM_2
;
566 if (port
->data
[0] < 0xf0) {
567 p0
|= port
->data
[0] >> 4;
568 port
->state
= STATE_2PARAM_1
;
571 port
->state
= STATE_UNKNOWN
;
573 output_packet(urb
, p0
, port
->data
[0], port
->data
[1], b
);
577 port
->state
= STATE_SYSEX_1
;
581 port
->state
= STATE_SYSEX_2
;
584 output_packet(urb
, p0
| 0x04, port
->data
[0], port
->data
[1], b
);
585 port
->state
= STATE_SYSEX_0
;
591 static void snd_usbmidi_standard_output(struct snd_usb_midi_out_endpoint
* ep
,
596 /* FIXME: lower-numbered ports can starve higher-numbered ports */
597 for (p
= 0; p
< 0x10; ++p
) {
598 struct usbmidi_out_port
* port
= &ep
->ports
[p
];
601 while (urb
->transfer_buffer_length
+ 3 < ep
->max_transfer
) {
603 if (snd_rawmidi_transmit(port
->substream
, &b
, 1) != 1) {
607 snd_usbmidi_transmit_byte(port
, b
, urb
);
612 static struct usb_protocol_ops snd_usbmidi_standard_ops
= {
613 .input
= snd_usbmidi_standard_input
,
614 .output
= snd_usbmidi_standard_output
,
615 .output_packet
= snd_usbmidi_output_standard_packet
,
618 static struct usb_protocol_ops snd_usbmidi_midiman_ops
= {
619 .input
= snd_usbmidi_midiman_input
,
620 .output
= snd_usbmidi_standard_output
,
621 .output_packet
= snd_usbmidi_output_midiman_packet
,
624 static struct usb_protocol_ops snd_usbmidi_maudio_broken_running_status_ops
= {
625 .input
= snd_usbmidi_maudio_broken_running_status_input
,
626 .output
= snd_usbmidi_standard_output
,
627 .output_packet
= snd_usbmidi_output_standard_packet
,
630 static struct usb_protocol_ops snd_usbmidi_cme_ops
= {
631 .input
= snd_usbmidi_cme_input
,
632 .output
= snd_usbmidi_standard_output
,
633 .output_packet
= snd_usbmidi_output_standard_packet
,
637 * Novation USB MIDI protocol: number of data bytes is in the first byte
638 * (when receiving) (+1!) or in the second byte (when sending); data begins
642 static void snd_usbmidi_novation_input(struct snd_usb_midi_in_endpoint
* ep
,
643 uint8_t* buffer
, int buffer_length
)
645 if (buffer_length
< 2 || !buffer
[0] || buffer_length
< buffer
[0] + 1)
647 snd_usbmidi_input_data(ep
, 0, &buffer
[2], buffer
[0] - 1);
650 static void snd_usbmidi_novation_output(struct snd_usb_midi_out_endpoint
* ep
,
653 uint8_t* transfer_buffer
;
656 if (!ep
->ports
[0].active
)
658 transfer_buffer
= urb
->transfer_buffer
;
659 count
= snd_rawmidi_transmit(ep
->ports
[0].substream
,
661 ep
->max_transfer
- 2);
663 ep
->ports
[0].active
= 0;
666 transfer_buffer
[0] = 0;
667 transfer_buffer
[1] = count
;
668 urb
->transfer_buffer_length
= 2 + count
;
671 static struct usb_protocol_ops snd_usbmidi_novation_ops
= {
672 .input
= snd_usbmidi_novation_input
,
673 .output
= snd_usbmidi_novation_output
,
677 * "raw" protocol: used by the MOTU FastLane.
680 static void snd_usbmidi_raw_input(struct snd_usb_midi_in_endpoint
* ep
,
681 uint8_t* buffer
, int buffer_length
)
683 snd_usbmidi_input_data(ep
, 0, buffer
, buffer_length
);
686 static void snd_usbmidi_raw_output(struct snd_usb_midi_out_endpoint
* ep
,
691 if (!ep
->ports
[0].active
)
693 count
= snd_rawmidi_transmit(ep
->ports
[0].substream
,
694 urb
->transfer_buffer
,
697 ep
->ports
[0].active
= 0;
700 urb
->transfer_buffer_length
= count
;
703 static struct usb_protocol_ops snd_usbmidi_raw_ops
= {
704 .input
= snd_usbmidi_raw_input
,
705 .output
= snd_usbmidi_raw_output
,
708 static void snd_usbmidi_us122l_input(struct snd_usb_midi_in_endpoint
*ep
,
709 uint8_t *buffer
, int buffer_length
)
711 if (buffer_length
!= 9)
714 while (buffer_length
&& buffer
[buffer_length
- 1] == 0xFD)
717 snd_usbmidi_input_data(ep
, 0, buffer
, buffer_length
);
720 static void snd_usbmidi_us122l_output(struct snd_usb_midi_out_endpoint
*ep
,
725 if (!ep
->ports
[0].active
)
727 count
= snd_usb_get_speed(ep
->umidi
->chip
->dev
) == USB_SPEED_HIGH
729 count
= snd_rawmidi_transmit(ep
->ports
[0].substream
,
730 urb
->transfer_buffer
,
733 ep
->ports
[0].active
= 0;
737 memset(urb
->transfer_buffer
+ count
, 0xFD, 9 - count
);
738 urb
->transfer_buffer_length
= count
;
741 static struct usb_protocol_ops snd_usbmidi_122l_ops
= {
742 .input
= snd_usbmidi_us122l_input
,
743 .output
= snd_usbmidi_us122l_output
,
747 * Emagic USB MIDI protocol: raw MIDI with "F5 xx" port switching.
750 static void snd_usbmidi_emagic_init_out(struct snd_usb_midi_out_endpoint
* ep
)
752 static const u8 init_data
[] = {
753 /* initialization magic: "get version" */
755 0x00, 0x20, 0x31, /* Emagic */
757 0x0b, /* version number request */
758 0x00, /* command version */
759 0x00, /* EEPROM, box 0 */
762 send_bulk_static_data(ep
, init_data
, sizeof(init_data
));
763 /* while we're at it, pour on more magic */
764 send_bulk_static_data(ep
, init_data
, sizeof(init_data
));
767 static void snd_usbmidi_emagic_finish_out(struct snd_usb_midi_out_endpoint
* ep
)
769 static const u8 finish_data
[] = {
770 /* switch to patch mode with last preset */
772 0x00, 0x20, 0x31, /* Emagic */
774 0x10, /* patch switch command */
775 0x00, /* command version */
776 0x7f, /* to all boxes */
777 0x40, /* last preset in EEPROM */
780 send_bulk_static_data(ep
, finish_data
, sizeof(finish_data
));
783 static void snd_usbmidi_emagic_input(struct snd_usb_midi_in_endpoint
* ep
,
784 uint8_t* buffer
, int buffer_length
)
788 /* FF indicates end of valid data */
789 for (i
= 0; i
< buffer_length
; ++i
)
790 if (buffer
[i
] == 0xff) {
795 /* handle F5 at end of last buffer */
799 while (buffer_length
> 0) {
800 /* determine size of data until next F5 */
801 for (i
= 0; i
< buffer_length
; ++i
)
802 if (buffer
[i
] == 0xf5)
804 snd_usbmidi_input_data(ep
, ep
->current_port
, buffer
, i
);
808 if (buffer_length
<= 0)
810 /* assert(buffer[0] == 0xf5); */
816 if (buffer_length
<= 0)
818 if (buffer
[0] < 0x80) {
819 ep
->current_port
= (buffer
[0] - 1) & 15;
827 static void snd_usbmidi_emagic_output(struct snd_usb_midi_out_endpoint
* ep
,
830 int port0
= ep
->current_port
;
831 uint8_t* buf
= urb
->transfer_buffer
;
832 int buf_free
= ep
->max_transfer
;
835 for (i
= 0; i
< 0x10; ++i
) {
836 /* round-robin, starting at the last current port */
837 int portnum
= (port0
+ i
) & 15;
838 struct usbmidi_out_port
* port
= &ep
->ports
[portnum
];
842 if (snd_rawmidi_transmit_peek(port
->substream
, buf
, 1) != 1) {
847 if (portnum
!= ep
->current_port
) {
850 ep
->current_port
= portnum
;
852 buf
[1] = (portnum
+ 1) & 15;
859 length
= snd_rawmidi_transmit(port
->substream
, buf
, buf_free
);
867 if (buf_free
< ep
->max_transfer
&& buf_free
> 0) {
871 urb
->transfer_buffer_length
= ep
->max_transfer
- buf_free
;
874 static struct usb_protocol_ops snd_usbmidi_emagic_ops
= {
875 .input
= snd_usbmidi_emagic_input
,
876 .output
= snd_usbmidi_emagic_output
,
877 .init_out_endpoint
= snd_usbmidi_emagic_init_out
,
878 .finish_out_endpoint
= snd_usbmidi_emagic_finish_out
,
882 static int snd_usbmidi_output_open(struct snd_rawmidi_substream
*substream
)
884 struct snd_usb_midi
* umidi
= substream
->rmidi
->private_data
;
885 struct usbmidi_out_port
* port
= NULL
;
888 for (i
= 0; i
< MIDI_MAX_ENDPOINTS
; ++i
)
889 if (umidi
->endpoints
[i
].out
)
890 for (j
= 0; j
< 0x10; ++j
)
891 if (umidi
->endpoints
[i
].out
->ports
[j
].substream
== substream
) {
892 port
= &umidi
->endpoints
[i
].out
->ports
[j
];
899 substream
->runtime
->private_data
= port
;
900 port
->state
= STATE_UNKNOWN
;
904 static int snd_usbmidi_output_close(struct snd_rawmidi_substream
*substream
)
909 static void snd_usbmidi_output_trigger(struct snd_rawmidi_substream
*substream
, int up
)
911 struct usbmidi_out_port
* port
= (struct usbmidi_out_port
*)substream
->runtime
->private_data
;
915 if (port
->ep
->umidi
->chip
->shutdown
) {
916 /* gobble up remaining bytes to prevent wait in
917 * snd_rawmidi_drain_output */
918 while (!snd_rawmidi_transmit_empty(substream
))
919 snd_rawmidi_transmit_ack(substream
, 1);
922 tasklet_schedule(&port
->ep
->tasklet
);
926 static void snd_usbmidi_output_drain(struct snd_rawmidi_substream
*substream
)
928 struct usbmidi_out_port
* port
= substream
->runtime
->private_data
;
929 struct snd_usb_midi_out_endpoint
*ep
= port
->ep
;
930 unsigned int drain_urbs
;
932 long timeout
= msecs_to_jiffies(50);
935 * The substream buffer is empty, but some data might still be in the
936 * currently active URBs, so we have to wait for those to complete.
938 spin_lock_irq(&ep
->buffer_lock
);
939 drain_urbs
= ep
->active_urbs
;
941 ep
->drain_urbs
|= drain_urbs
;
943 prepare_to_wait(&ep
->drain_wait
, &wait
,
944 TASK_UNINTERRUPTIBLE
);
945 spin_unlock_irq(&ep
->buffer_lock
);
946 timeout
= schedule_timeout(timeout
);
947 spin_lock_irq(&ep
->buffer_lock
);
948 drain_urbs
&= ep
->drain_urbs
;
949 } while (drain_urbs
&& timeout
);
950 finish_wait(&ep
->drain_wait
, &wait
);
952 spin_unlock_irq(&ep
->buffer_lock
);
955 static int snd_usbmidi_input_open(struct snd_rawmidi_substream
*substream
)
960 static int snd_usbmidi_input_close(struct snd_rawmidi_substream
*substream
)
965 static void snd_usbmidi_input_trigger(struct snd_rawmidi_substream
*substream
, int up
)
967 struct snd_usb_midi
* umidi
= substream
->rmidi
->private_data
;
970 set_bit(substream
->number
, &umidi
->input_triggered
);
972 clear_bit(substream
->number
, &umidi
->input_triggered
);
975 static struct snd_rawmidi_ops snd_usbmidi_output_ops
= {
976 .open
= snd_usbmidi_output_open
,
977 .close
= snd_usbmidi_output_close
,
978 .trigger
= snd_usbmidi_output_trigger
,
979 .drain
= snd_usbmidi_output_drain
,
982 static struct snd_rawmidi_ops snd_usbmidi_input_ops
= {
983 .open
= snd_usbmidi_input_open
,
984 .close
= snd_usbmidi_input_close
,
985 .trigger
= snd_usbmidi_input_trigger
988 static void free_urb_and_buffer(struct snd_usb_midi
*umidi
, struct urb
*urb
,
989 unsigned int buffer_length
)
991 usb_buffer_free(umidi
->chip
->dev
, buffer_length
,
992 urb
->transfer_buffer
, urb
->transfer_dma
);
997 * Frees an input endpoint.
998 * May be called when ep hasn't been initialized completely.
1000 static void snd_usbmidi_in_endpoint_delete(struct snd_usb_midi_in_endpoint
* ep
)
1004 for (i
= 0; i
< INPUT_URBS
; ++i
)
1006 free_urb_and_buffer(ep
->umidi
, ep
->urbs
[i
],
1007 ep
->urbs
[i
]->transfer_buffer_length
);
1012 * Creates an input endpoint.
1014 static int snd_usbmidi_in_endpoint_create(struct snd_usb_midi
* umidi
,
1015 struct snd_usb_midi_endpoint_info
* ep_info
,
1016 struct snd_usb_midi_endpoint
* rep
)
1018 struct snd_usb_midi_in_endpoint
* ep
;
1025 ep
= kzalloc(sizeof(*ep
), GFP_KERNEL
);
1030 for (i
= 0; i
< INPUT_URBS
; ++i
) {
1031 ep
->urbs
[i
] = usb_alloc_urb(0, GFP_KERNEL
);
1033 snd_usbmidi_in_endpoint_delete(ep
);
1037 if (ep_info
->in_interval
)
1038 pipe
= usb_rcvintpipe(umidi
->chip
->dev
, ep_info
->in_ep
);
1040 pipe
= usb_rcvbulkpipe(umidi
->chip
->dev
, ep_info
->in_ep
);
1041 length
= usb_maxpacket(umidi
->chip
->dev
, pipe
, 0);
1042 for (i
= 0; i
< INPUT_URBS
; ++i
) {
1043 buffer
= usb_buffer_alloc(umidi
->chip
->dev
, length
, GFP_KERNEL
,
1044 &ep
->urbs
[i
]->transfer_dma
);
1046 snd_usbmidi_in_endpoint_delete(ep
);
1049 if (ep_info
->in_interval
)
1050 usb_fill_int_urb(ep
->urbs
[i
], umidi
->chip
->dev
,
1051 pipe
, buffer
, length
,
1052 snd_usbmidi_in_urb_complete
,
1053 ep
, ep_info
->in_interval
);
1055 usb_fill_bulk_urb(ep
->urbs
[i
], umidi
->chip
->dev
,
1056 pipe
, buffer
, length
,
1057 snd_usbmidi_in_urb_complete
, ep
);
1058 ep
->urbs
[i
]->transfer_flags
= URB_NO_TRANSFER_DMA_MAP
;
1065 static unsigned int snd_usbmidi_count_bits(unsigned int x
)
1069 for (bits
= 0; x
; ++bits
)
1075 * Frees an output endpoint.
1076 * May be called when ep hasn't been initialized completely.
1078 static void snd_usbmidi_out_endpoint_delete(struct snd_usb_midi_out_endpoint
* ep
)
1082 for (i
= 0; i
< OUTPUT_URBS
; ++i
)
1083 if (ep
->urbs
[i
].urb
)
1084 free_urb_and_buffer(ep
->umidi
, ep
->urbs
[i
].urb
,
1090 * Creates an output endpoint, and initializes output ports.
1092 static int snd_usbmidi_out_endpoint_create(struct snd_usb_midi
* umidi
,
1093 struct snd_usb_midi_endpoint_info
* ep_info
,
1094 struct snd_usb_midi_endpoint
* rep
)
1096 struct snd_usb_midi_out_endpoint
* ep
;
1102 ep
= kzalloc(sizeof(*ep
), GFP_KERNEL
);
1107 for (i
= 0; i
< OUTPUT_URBS
; ++i
) {
1108 ep
->urbs
[i
].urb
= usb_alloc_urb(0, GFP_KERNEL
);
1109 if (!ep
->urbs
[i
].urb
) {
1110 snd_usbmidi_out_endpoint_delete(ep
);
1113 ep
->urbs
[i
].ep
= ep
;
1115 if (ep_info
->out_interval
)
1116 pipe
= usb_sndintpipe(umidi
->chip
->dev
, ep_info
->out_ep
);
1118 pipe
= usb_sndbulkpipe(umidi
->chip
->dev
, ep_info
->out_ep
);
1119 if (umidi
->chip
->usb_id
== USB_ID(0x0a92, 0x1020)) /* ESI M4U */
1120 ep
->max_transfer
= 4;
1122 ep
->max_transfer
= usb_maxpacket(umidi
->chip
->dev
, pipe
, 1);
1123 for (i
= 0; i
< OUTPUT_URBS
; ++i
) {
1124 buffer
= usb_buffer_alloc(umidi
->chip
->dev
,
1125 ep
->max_transfer
, GFP_KERNEL
,
1126 &ep
->urbs
[i
].urb
->transfer_dma
);
1128 snd_usbmidi_out_endpoint_delete(ep
);
1131 if (ep_info
->out_interval
)
1132 usb_fill_int_urb(ep
->urbs
[i
].urb
, umidi
->chip
->dev
,
1133 pipe
, buffer
, ep
->max_transfer
,
1134 snd_usbmidi_out_urb_complete
,
1135 &ep
->urbs
[i
], ep_info
->out_interval
);
1137 usb_fill_bulk_urb(ep
->urbs
[i
].urb
, umidi
->chip
->dev
,
1138 pipe
, buffer
, ep
->max_transfer
,
1139 snd_usbmidi_out_urb_complete
,
1141 ep
->urbs
[i
].urb
->transfer_flags
= URB_NO_TRANSFER_DMA_MAP
;
1144 spin_lock_init(&ep
->buffer_lock
);
1145 tasklet_init(&ep
->tasklet
, snd_usbmidi_out_tasklet
, (unsigned long)ep
);
1146 init_waitqueue_head(&ep
->drain_wait
);
1148 for (i
= 0; i
< 0x10; ++i
)
1149 if (ep_info
->out_cables
& (1 << i
)) {
1150 ep
->ports
[i
].ep
= ep
;
1151 ep
->ports
[i
].cable
= i
<< 4;
1154 if (umidi
->usb_protocol_ops
->init_out_endpoint
)
1155 umidi
->usb_protocol_ops
->init_out_endpoint(ep
);
1164 static void snd_usbmidi_free(struct snd_usb_midi
* umidi
)
1168 for (i
= 0; i
< MIDI_MAX_ENDPOINTS
; ++i
) {
1169 struct snd_usb_midi_endpoint
* ep
= &umidi
->endpoints
[i
];
1171 snd_usbmidi_out_endpoint_delete(ep
->out
);
1173 snd_usbmidi_in_endpoint_delete(ep
->in
);
1179 * Unlinks all URBs (must be done before the usb_device is deleted).
1181 void snd_usbmidi_disconnect(struct list_head
* p
)
1183 struct snd_usb_midi
* umidi
;
1186 umidi
= list_entry(p
, struct snd_usb_midi
, list
);
1188 * an URB's completion handler may start the timer and
1189 * a timer may submit an URB. To reliably break the cycle
1190 * a flag under lock must be used
1192 spin_lock_irq(&umidi
->disc_lock
);
1193 umidi
->disconnected
= 1;
1194 spin_unlock_irq(&umidi
->disc_lock
);
1195 for (i
= 0; i
< MIDI_MAX_ENDPOINTS
; ++i
) {
1196 struct snd_usb_midi_endpoint
* ep
= &umidi
->endpoints
[i
];
1198 tasklet_kill(&ep
->out
->tasklet
);
1200 for (j
= 0; j
< OUTPUT_URBS
; ++j
)
1201 usb_kill_urb(ep
->out
->urbs
[j
].urb
);
1202 if (umidi
->usb_protocol_ops
->finish_out_endpoint
)
1203 umidi
->usb_protocol_ops
->finish_out_endpoint(ep
->out
);
1206 for (j
= 0; j
< INPUT_URBS
; ++j
)
1207 usb_kill_urb(ep
->in
->urbs
[j
]);
1208 /* free endpoints here; later call can result in Oops */
1210 snd_usbmidi_out_endpoint_delete(ep
->out
);
1214 snd_usbmidi_in_endpoint_delete(ep
->in
);
1218 del_timer_sync(&umidi
->error_timer
);
1221 static void snd_usbmidi_rawmidi_free(struct snd_rawmidi
*rmidi
)
1223 struct snd_usb_midi
* umidi
= rmidi
->private_data
;
1224 snd_usbmidi_free(umidi
);
1227 static struct snd_rawmidi_substream
*snd_usbmidi_find_substream(struct snd_usb_midi
* umidi
,
1228 int stream
, int number
)
1230 struct list_head
* list
;
1232 list_for_each(list
, &umidi
->rmidi
->streams
[stream
].substreams
) {
1233 struct snd_rawmidi_substream
*substream
= list_entry(list
, struct snd_rawmidi_substream
, list
);
1234 if (substream
->number
== number
)
1241 * This list specifies names for ports that do not fit into the standard
1242 * "(product) MIDI (n)" schema because they aren't external MIDI ports,
1243 * such as internal control or synthesizer ports.
1245 static struct port_info
{
1250 unsigned int seq_flags
;
1251 } snd_usbmidi_port_info
[] = {
1252 #define PORT_INFO(vendor, product, num, name_, voices_, flags) \
1253 { .id = USB_ID(vendor, product), \
1254 .port = num, .voices = voices_, \
1255 .name = name_, .seq_flags = flags }
1256 #define EXTERNAL_PORT(vendor, product, num, name) \
1257 PORT_INFO(vendor, product, num, name, 0, \
1258 SNDRV_SEQ_PORT_TYPE_MIDI_GENERIC | \
1259 SNDRV_SEQ_PORT_TYPE_HARDWARE | \
1260 SNDRV_SEQ_PORT_TYPE_PORT)
1261 #define CONTROL_PORT(vendor, product, num, name) \
1262 PORT_INFO(vendor, product, num, name, 0, \
1263 SNDRV_SEQ_PORT_TYPE_MIDI_GENERIC | \
1264 SNDRV_SEQ_PORT_TYPE_HARDWARE)
1265 #define ROLAND_SYNTH_PORT(vendor, product, num, name, voices) \
1266 PORT_INFO(vendor, product, num, name, voices, \
1267 SNDRV_SEQ_PORT_TYPE_MIDI_GENERIC | \
1268 SNDRV_SEQ_PORT_TYPE_MIDI_GM | \
1269 SNDRV_SEQ_PORT_TYPE_MIDI_GM2 | \
1270 SNDRV_SEQ_PORT_TYPE_MIDI_GS | \
1271 SNDRV_SEQ_PORT_TYPE_MIDI_XG | \
1272 SNDRV_SEQ_PORT_TYPE_HARDWARE | \
1273 SNDRV_SEQ_PORT_TYPE_SYNTHESIZER)
1274 #define SOUNDCANVAS_PORT(vendor, product, num, name, voices) \
1275 PORT_INFO(vendor, product, num, name, voices, \
1276 SNDRV_SEQ_PORT_TYPE_MIDI_GENERIC | \
1277 SNDRV_SEQ_PORT_TYPE_MIDI_GM | \
1278 SNDRV_SEQ_PORT_TYPE_MIDI_GM2 | \
1279 SNDRV_SEQ_PORT_TYPE_MIDI_GS | \
1280 SNDRV_SEQ_PORT_TYPE_MIDI_XG | \
1281 SNDRV_SEQ_PORT_TYPE_MIDI_MT32 | \
1282 SNDRV_SEQ_PORT_TYPE_HARDWARE | \
1283 SNDRV_SEQ_PORT_TYPE_SYNTHESIZER)
1285 CONTROL_PORT(0x0582, 0x0000, 2, "%s Control"),
1286 /* Roland SC-8850 */
1287 SOUNDCANVAS_PORT(0x0582, 0x0003, 0, "%s Part A", 128),
1288 SOUNDCANVAS_PORT(0x0582, 0x0003, 1, "%s Part B", 128),
1289 SOUNDCANVAS_PORT(0x0582, 0x0003, 2, "%s Part C", 128),
1290 SOUNDCANVAS_PORT(0x0582, 0x0003, 3, "%s Part D", 128),
1291 EXTERNAL_PORT(0x0582, 0x0003, 4, "%s MIDI 1"),
1292 EXTERNAL_PORT(0x0582, 0x0003, 5, "%s MIDI 2"),
1294 EXTERNAL_PORT(0x0582, 0x0004, 0, "%s MIDI"),
1295 CONTROL_PORT(0x0582, 0x0004, 1, "%s Control"),
1296 /* Roland SC-8820 */
1297 SOUNDCANVAS_PORT(0x0582, 0x0007, 0, "%s Part A", 64),
1298 SOUNDCANVAS_PORT(0x0582, 0x0007, 1, "%s Part B", 64),
1299 EXTERNAL_PORT(0x0582, 0x0007, 2, "%s MIDI"),
1301 SOUNDCANVAS_PORT(0x0582, 0x000b, 0, "%s Part A", 64),
1302 SOUNDCANVAS_PORT(0x0582, 0x000b, 1, "%s Part B", 64),
1303 EXTERNAL_PORT(0x0582, 0x000b, 2, "%s MIDI"),
1305 SOUNDCANVAS_PORT(0x0582, 0x000c, 0, "%s Part A", 64),
1306 SOUNDCANVAS_PORT(0x0582, 0x000c, 1, "%s Part B", 64),
1307 EXTERNAL_PORT(0x0582, 0x000c, 2, "%s MIDI"),
1309 CONTROL_PORT(0x0582, 0x0014, 8, "%s Control"),
1311 ROLAND_SYNTH_PORT(0x0582, 0x0016, 0, "%s Part A", 128),
1312 ROLAND_SYNTH_PORT(0x0582, 0x0016, 1, "%s Part B", 128),
1313 EXTERNAL_PORT(0x0582, 0x0016, 2, "%s MIDI 1"),
1314 EXTERNAL_PORT(0x0582, 0x0016, 3, "%s MIDI 2"),
1316 CONTROL_PORT(0x0582, 0x0023, 5, "%s Control"),
1318 ROLAND_SYNTH_PORT(0x0582, 0x0027, 0, "%s Part A", 64),
1319 ROLAND_SYNTH_PORT(0x0582, 0x0027, 1, "%s Part B", 64),
1320 EXTERNAL_PORT(0x0582, 0x0027, 2, "%s MIDI"),
1322 ROLAND_SYNTH_PORT(0x0582, 0x0029, 0, "%s Part A", 128),
1323 ROLAND_SYNTH_PORT(0x0582, 0x0029, 1, "%s Part B", 128),
1324 EXTERNAL_PORT(0x0582, 0x0029, 2, "%s MIDI 1"),
1325 EXTERNAL_PORT(0x0582, 0x0029, 3, "%s MIDI 2"),
1327 EXTERNAL_PORT(0x0582, 0x002b, 0, "%s MIDI"),
1328 CONTROL_PORT(0x0582, 0x002b, 1, "%s Control"),
1330 EXTERNAL_PORT(0x0582, 0x002f, 0, "%s MIDI"),
1331 EXTERNAL_PORT(0x0582, 0x002f, 1, "%s External MIDI"),
1332 EXTERNAL_PORT(0x0582, 0x002f, 2, "%s Sync"),
1334 EXTERNAL_PORT(0x0582, 0x0033, 0, "%s MIDI"),
1335 EXTERNAL_PORT(0x0582, 0x0033, 1, "%s 1"),
1336 EXTERNAL_PORT(0x0582, 0x0033, 2, "%s 2"),
1338 EXTERNAL_PORT(0x0582, 0x003b, 0, "%s MIDI"),
1339 CONTROL_PORT(0x0582, 0x003b, 1, "%s Control"),
1340 /* Edirol UA-1000 */
1341 EXTERNAL_PORT(0x0582, 0x0044, 0, "%s MIDI"),
1342 CONTROL_PORT(0x0582, 0x0044, 1, "%s Control"),
1344 EXTERNAL_PORT(0x0582, 0x0048, 0, "%s MIDI"),
1345 EXTERNAL_PORT(0x0582, 0x0048, 1, "%s 1"),
1346 EXTERNAL_PORT(0x0582, 0x0048, 2, "%s 2"),
1348 EXTERNAL_PORT(0x0582, 0x004d, 0, "%s MIDI"),
1349 EXTERNAL_PORT(0x0582, 0x004d, 1, "%s 1"),
1350 EXTERNAL_PORT(0x0582, 0x004d, 2, "%s 2"),
1352 CONTROL_PORT(0x0582, 0x009a, 3, "%s Control"),
1353 /* M-Audio MidiSport 8x8 */
1354 CONTROL_PORT(0x0763, 0x1031, 8, "%s Control"),
1355 CONTROL_PORT(0x0763, 0x1033, 8, "%s Control"),
1357 EXTERNAL_PORT(0x07fd, 0x0001, 0, "%s MIDI A"),
1358 EXTERNAL_PORT(0x07fd, 0x0001, 1, "%s MIDI B"),
1359 /* Emagic Unitor8/AMT8/MT4 */
1360 EXTERNAL_PORT(0x086a, 0x0001, 8, "%s Broadcast"),
1361 EXTERNAL_PORT(0x086a, 0x0002, 8, "%s Broadcast"),
1362 EXTERNAL_PORT(0x086a, 0x0003, 4, "%s Broadcast"),
1365 static struct port_info
*find_port_info(struct snd_usb_midi
* umidi
, int number
)
1369 for (i
= 0; i
< ARRAY_SIZE(snd_usbmidi_port_info
); ++i
) {
1370 if (snd_usbmidi_port_info
[i
].id
== umidi
->chip
->usb_id
&&
1371 snd_usbmidi_port_info
[i
].port
== number
)
1372 return &snd_usbmidi_port_info
[i
];
1377 static void snd_usbmidi_get_port_info(struct snd_rawmidi
*rmidi
, int number
,
1378 struct snd_seq_port_info
*seq_port_info
)
1380 struct snd_usb_midi
*umidi
= rmidi
->private_data
;
1381 struct port_info
*port_info
;
1383 /* TODO: read port flags from descriptors */
1384 port_info
= find_port_info(umidi
, number
);
1386 seq_port_info
->type
= port_info
->seq_flags
;
1387 seq_port_info
->midi_voices
= port_info
->voices
;
1391 static void snd_usbmidi_init_substream(struct snd_usb_midi
* umidi
,
1392 int stream
, int number
,
1393 struct snd_rawmidi_substream
** rsubstream
)
1395 struct port_info
*port_info
;
1396 const char *name_format
;
1398 struct snd_rawmidi_substream
*substream
= snd_usbmidi_find_substream(umidi
, stream
, number
);
1400 snd_printd(KERN_ERR
"substream %d:%d not found\n", stream
, number
);
1404 /* TODO: read port name from jack descriptor */
1405 port_info
= find_port_info(umidi
, number
);
1406 name_format
= port_info
? port_info
->name
: "%s MIDI %d";
1407 snprintf(substream
->name
, sizeof(substream
->name
),
1408 name_format
, umidi
->chip
->card
->shortname
, number
+ 1);
1410 *rsubstream
= substream
;
1414 * Creates the endpoints and their ports.
1416 static int snd_usbmidi_create_endpoints(struct snd_usb_midi
* umidi
,
1417 struct snd_usb_midi_endpoint_info
* endpoints
)
1420 int out_ports
= 0, in_ports
= 0;
1422 for (i
= 0; i
< MIDI_MAX_ENDPOINTS
; ++i
) {
1423 if (endpoints
[i
].out_cables
) {
1424 err
= snd_usbmidi_out_endpoint_create(umidi
, &endpoints
[i
],
1425 &umidi
->endpoints
[i
]);
1429 if (endpoints
[i
].in_cables
) {
1430 err
= snd_usbmidi_in_endpoint_create(umidi
, &endpoints
[i
],
1431 &umidi
->endpoints
[i
]);
1436 for (j
= 0; j
< 0x10; ++j
) {
1437 if (endpoints
[i
].out_cables
& (1 << j
)) {
1438 snd_usbmidi_init_substream(umidi
, SNDRV_RAWMIDI_STREAM_OUTPUT
, out_ports
,
1439 &umidi
->endpoints
[i
].out
->ports
[j
].substream
);
1442 if (endpoints
[i
].in_cables
& (1 << j
)) {
1443 snd_usbmidi_init_substream(umidi
, SNDRV_RAWMIDI_STREAM_INPUT
, in_ports
,
1444 &umidi
->endpoints
[i
].in
->ports
[j
].substream
);
1449 snd_printdd(KERN_INFO
"created %d output and %d input ports\n",
1450 out_ports
, in_ports
);
1455 * Returns MIDIStreaming device capabilities.
1457 static int snd_usbmidi_get_ms_info(struct snd_usb_midi
* umidi
,
1458 struct snd_usb_midi_endpoint_info
* endpoints
)
1460 struct usb_interface
* intf
;
1461 struct usb_host_interface
*hostif
;
1462 struct usb_interface_descriptor
* intfd
;
1463 struct usb_ms_header_descriptor
* ms_header
;
1464 struct usb_host_endpoint
*hostep
;
1465 struct usb_endpoint_descriptor
* ep
;
1466 struct usb_ms_endpoint_descriptor
* ms_ep
;
1469 intf
= umidi
->iface
;
1472 hostif
= &intf
->altsetting
[0];
1473 intfd
= get_iface_desc(hostif
);
1474 ms_header
= (struct usb_ms_header_descriptor
*)hostif
->extra
;
1475 if (hostif
->extralen
>= 7 &&
1476 ms_header
->bLength
>= 7 &&
1477 ms_header
->bDescriptorType
== USB_DT_CS_INTERFACE
&&
1478 ms_header
->bDescriptorSubtype
== HEADER
)
1479 snd_printdd(KERN_INFO
"MIDIStreaming version %02x.%02x\n",
1480 ms_header
->bcdMSC
[1], ms_header
->bcdMSC
[0]);
1482 snd_printk(KERN_WARNING
"MIDIStreaming interface descriptor not found\n");
1485 for (i
= 0; i
< intfd
->bNumEndpoints
; ++i
) {
1486 hostep
= &hostif
->endpoint
[i
];
1487 ep
= get_ep_desc(hostep
);
1488 if (!usb_endpoint_xfer_bulk(ep
) && !usb_endpoint_xfer_int(ep
))
1490 ms_ep
= (struct usb_ms_endpoint_descriptor
*)hostep
->extra
;
1491 if (hostep
->extralen
< 4 ||
1492 ms_ep
->bLength
< 4 ||
1493 ms_ep
->bDescriptorType
!= USB_DT_CS_ENDPOINT
||
1494 ms_ep
->bDescriptorSubtype
!= MS_GENERAL
)
1496 if (usb_endpoint_dir_out(ep
)) {
1497 if (endpoints
[epidx
].out_ep
) {
1498 if (++epidx
>= MIDI_MAX_ENDPOINTS
) {
1499 snd_printk(KERN_WARNING
"too many endpoints\n");
1503 endpoints
[epidx
].out_ep
= usb_endpoint_num(ep
);
1504 if (usb_endpoint_xfer_int(ep
))
1505 endpoints
[epidx
].out_interval
= ep
->bInterval
;
1506 else if (snd_usb_get_speed(umidi
->chip
->dev
) == USB_SPEED_LOW
)
1508 * Low speed bulk transfers don't exist, so
1509 * force interrupt transfers for devices like
1510 * ESI MIDI Mate that try to use them anyway.
1512 endpoints
[epidx
].out_interval
= 1;
1513 endpoints
[epidx
].out_cables
= (1 << ms_ep
->bNumEmbMIDIJack
) - 1;
1514 snd_printdd(KERN_INFO
"EP %02X: %d jack(s)\n",
1515 ep
->bEndpointAddress
, ms_ep
->bNumEmbMIDIJack
);
1517 if (endpoints
[epidx
].in_ep
) {
1518 if (++epidx
>= MIDI_MAX_ENDPOINTS
) {
1519 snd_printk(KERN_WARNING
"too many endpoints\n");
1523 endpoints
[epidx
].in_ep
= usb_endpoint_num(ep
);
1524 if (usb_endpoint_xfer_int(ep
))
1525 endpoints
[epidx
].in_interval
= ep
->bInterval
;
1526 else if (snd_usb_get_speed(umidi
->chip
->dev
) == USB_SPEED_LOW
)
1527 endpoints
[epidx
].in_interval
= 1;
1528 endpoints
[epidx
].in_cables
= (1 << ms_ep
->bNumEmbMIDIJack
) - 1;
1529 snd_printdd(KERN_INFO
"EP %02X: %d jack(s)\n",
1530 ep
->bEndpointAddress
, ms_ep
->bNumEmbMIDIJack
);
1537 * On Roland devices, use the second alternate setting to be able to use
1538 * the interrupt input endpoint.
1540 static void snd_usbmidi_switch_roland_altsetting(struct snd_usb_midi
* umidi
)
1542 struct usb_interface
* intf
;
1543 struct usb_host_interface
*hostif
;
1544 struct usb_interface_descriptor
* intfd
;
1546 intf
= umidi
->iface
;
1547 if (!intf
|| intf
->num_altsetting
!= 2)
1550 hostif
= &intf
->altsetting
[1];
1551 intfd
= get_iface_desc(hostif
);
1552 if (intfd
->bNumEndpoints
!= 2 ||
1553 (get_endpoint(hostif
, 0)->bmAttributes
& USB_ENDPOINT_XFERTYPE_MASK
) != USB_ENDPOINT_XFER_BULK
||
1554 (get_endpoint(hostif
, 1)->bmAttributes
& USB_ENDPOINT_XFERTYPE_MASK
) != USB_ENDPOINT_XFER_INT
)
1557 snd_printdd(KERN_INFO
"switching to altsetting %d with int ep\n",
1558 intfd
->bAlternateSetting
);
1559 usb_set_interface(umidi
->chip
->dev
, intfd
->bInterfaceNumber
,
1560 intfd
->bAlternateSetting
);
1564 * Try to find any usable endpoints in the interface.
1566 static int snd_usbmidi_detect_endpoints(struct snd_usb_midi
* umidi
,
1567 struct snd_usb_midi_endpoint_info
* endpoint
,
1570 struct usb_interface
* intf
;
1571 struct usb_host_interface
*hostif
;
1572 struct usb_interface_descriptor
* intfd
;
1573 struct usb_endpoint_descriptor
* epd
;
1574 int i
, out_eps
= 0, in_eps
= 0;
1576 if (USB_ID_VENDOR(umidi
->chip
->usb_id
) == 0x0582)
1577 snd_usbmidi_switch_roland_altsetting(umidi
);
1579 if (endpoint
[0].out_ep
|| endpoint
[0].in_ep
)
1582 intf
= umidi
->iface
;
1583 if (!intf
|| intf
->num_altsetting
< 1)
1585 hostif
= intf
->cur_altsetting
;
1586 intfd
= get_iface_desc(hostif
);
1588 for (i
= 0; i
< intfd
->bNumEndpoints
; ++i
) {
1589 epd
= get_endpoint(hostif
, i
);
1590 if (!usb_endpoint_xfer_bulk(epd
) &&
1591 !usb_endpoint_xfer_int(epd
))
1593 if (out_eps
< max_endpoints
&&
1594 usb_endpoint_dir_out(epd
)) {
1595 endpoint
[out_eps
].out_ep
= usb_endpoint_num(epd
);
1596 if (usb_endpoint_xfer_int(epd
))
1597 endpoint
[out_eps
].out_interval
= epd
->bInterval
;
1600 if (in_eps
< max_endpoints
&&
1601 usb_endpoint_dir_in(epd
)) {
1602 endpoint
[in_eps
].in_ep
= usb_endpoint_num(epd
);
1603 if (usb_endpoint_xfer_int(epd
))
1604 endpoint
[in_eps
].in_interval
= epd
->bInterval
;
1608 return (out_eps
|| in_eps
) ? 0 : -ENOENT
;
1612 * Detects the endpoints for one-port-per-endpoint protocols.
1614 static int snd_usbmidi_detect_per_port_endpoints(struct snd_usb_midi
* umidi
,
1615 struct snd_usb_midi_endpoint_info
* endpoints
)
1619 err
= snd_usbmidi_detect_endpoints(umidi
, endpoints
, MIDI_MAX_ENDPOINTS
);
1620 for (i
= 0; i
< MIDI_MAX_ENDPOINTS
; ++i
) {
1621 if (endpoints
[i
].out_ep
)
1622 endpoints
[i
].out_cables
= 0x0001;
1623 if (endpoints
[i
].in_ep
)
1624 endpoints
[i
].in_cables
= 0x0001;
1630 * Detects the endpoints and ports of Yamaha devices.
1632 static int snd_usbmidi_detect_yamaha(struct snd_usb_midi
* umidi
,
1633 struct snd_usb_midi_endpoint_info
* endpoint
)
1635 struct usb_interface
* intf
;
1636 struct usb_host_interface
*hostif
;
1637 struct usb_interface_descriptor
* intfd
;
1640 intf
= umidi
->iface
;
1643 hostif
= intf
->altsetting
;
1644 intfd
= get_iface_desc(hostif
);
1645 if (intfd
->bNumEndpoints
< 1)
1649 * For each port there is one MIDI_IN/OUT_JACK descriptor, not
1650 * necessarily with any useful contents. So simply count 'em.
1652 for (cs_desc
= hostif
->extra
;
1653 cs_desc
< hostif
->extra
+ hostif
->extralen
&& cs_desc
[0] >= 2;
1654 cs_desc
+= cs_desc
[0]) {
1655 if (cs_desc
[1] == USB_DT_CS_INTERFACE
) {
1656 if (cs_desc
[2] == MIDI_IN_JACK
)
1657 endpoint
->in_cables
= (endpoint
->in_cables
<< 1) | 1;
1658 else if (cs_desc
[2] == MIDI_OUT_JACK
)
1659 endpoint
->out_cables
= (endpoint
->out_cables
<< 1) | 1;
1662 if (!endpoint
->in_cables
&& !endpoint
->out_cables
)
1665 return snd_usbmidi_detect_endpoints(umidi
, endpoint
, 1);
1669 * Creates the endpoints and their ports for Midiman devices.
1671 static int snd_usbmidi_create_endpoints_midiman(struct snd_usb_midi
* umidi
,
1672 struct snd_usb_midi_endpoint_info
* endpoint
)
1674 struct snd_usb_midi_endpoint_info ep_info
;
1675 struct usb_interface
* intf
;
1676 struct usb_host_interface
*hostif
;
1677 struct usb_interface_descriptor
* intfd
;
1678 struct usb_endpoint_descriptor
* epd
;
1681 intf
= umidi
->iface
;
1684 hostif
= intf
->altsetting
;
1685 intfd
= get_iface_desc(hostif
);
1687 * The various MidiSport devices have more or less random endpoint
1688 * numbers, so we have to identify the endpoints by their index in
1689 * the descriptor array, like the driver for that other OS does.
1691 * There is one interrupt input endpoint for all input ports, one
1692 * bulk output endpoint for even-numbered ports, and one for odd-
1693 * numbered ports. Both bulk output endpoints have corresponding
1694 * input bulk endpoints (at indices 1 and 3) which aren't used.
1696 if (intfd
->bNumEndpoints
< (endpoint
->out_cables
> 0x0001 ? 5 : 3)) {
1697 snd_printdd(KERN_ERR
"not enough endpoints\n");
1701 epd
= get_endpoint(hostif
, 0);
1702 if (!usb_endpoint_dir_in(epd
) || !usb_endpoint_xfer_int(epd
)) {
1703 snd_printdd(KERN_ERR
"endpoint[0] isn't interrupt\n");
1706 epd
= get_endpoint(hostif
, 2);
1707 if (!usb_endpoint_dir_out(epd
) || !usb_endpoint_xfer_bulk(epd
)) {
1708 snd_printdd(KERN_ERR
"endpoint[2] isn't bulk output\n");
1711 if (endpoint
->out_cables
> 0x0001) {
1712 epd
= get_endpoint(hostif
, 4);
1713 if (!usb_endpoint_dir_out(epd
) ||
1714 !usb_endpoint_xfer_bulk(epd
)) {
1715 snd_printdd(KERN_ERR
"endpoint[4] isn't bulk output\n");
1720 ep_info
.out_ep
= get_endpoint(hostif
, 2)->bEndpointAddress
& USB_ENDPOINT_NUMBER_MASK
;
1721 ep_info
.out_interval
= 0;
1722 ep_info
.out_cables
= endpoint
->out_cables
& 0x5555;
1723 err
= snd_usbmidi_out_endpoint_create(umidi
, &ep_info
, &umidi
->endpoints
[0]);
1727 ep_info
.in_ep
= get_endpoint(hostif
, 0)->bEndpointAddress
& USB_ENDPOINT_NUMBER_MASK
;
1728 ep_info
.in_interval
= get_endpoint(hostif
, 0)->bInterval
;
1729 ep_info
.in_cables
= endpoint
->in_cables
;
1730 err
= snd_usbmidi_in_endpoint_create(umidi
, &ep_info
, &umidi
->endpoints
[0]);
1734 if (endpoint
->out_cables
> 0x0001) {
1735 ep_info
.out_ep
= get_endpoint(hostif
, 4)->bEndpointAddress
& USB_ENDPOINT_NUMBER_MASK
;
1736 ep_info
.out_cables
= endpoint
->out_cables
& 0xaaaa;
1737 err
= snd_usbmidi_out_endpoint_create(umidi
, &ep_info
, &umidi
->endpoints
[1]);
1742 for (cable
= 0; cable
< 0x10; ++cable
) {
1743 if (endpoint
->out_cables
& (1 << cable
))
1744 snd_usbmidi_init_substream(umidi
, SNDRV_RAWMIDI_STREAM_OUTPUT
, cable
,
1745 &umidi
->endpoints
[cable
& 1].out
->ports
[cable
].substream
);
1746 if (endpoint
->in_cables
& (1 << cable
))
1747 snd_usbmidi_init_substream(umidi
, SNDRV_RAWMIDI_STREAM_INPUT
, cable
,
1748 &umidi
->endpoints
[0].in
->ports
[cable
].substream
);
1753 static struct snd_rawmidi_global_ops snd_usbmidi_ops
= {
1754 .get_port_info
= snd_usbmidi_get_port_info
,
1757 static int snd_usbmidi_create_rawmidi(struct snd_usb_midi
* umidi
,
1758 int out_ports
, int in_ports
)
1760 struct snd_rawmidi
*rmidi
;
1763 err
= snd_rawmidi_new(umidi
->chip
->card
, "USB MIDI",
1764 umidi
->chip
->next_midi_device
++,
1765 out_ports
, in_ports
, &rmidi
);
1768 strcpy(rmidi
->name
, umidi
->chip
->card
->shortname
);
1769 rmidi
->info_flags
= SNDRV_RAWMIDI_INFO_OUTPUT
|
1770 SNDRV_RAWMIDI_INFO_INPUT
|
1771 SNDRV_RAWMIDI_INFO_DUPLEX
;
1772 rmidi
->ops
= &snd_usbmidi_ops
;
1773 rmidi
->private_data
= umidi
;
1774 rmidi
->private_free
= snd_usbmidi_rawmidi_free
;
1775 snd_rawmidi_set_ops(rmidi
, SNDRV_RAWMIDI_STREAM_OUTPUT
, &snd_usbmidi_output_ops
);
1776 snd_rawmidi_set_ops(rmidi
, SNDRV_RAWMIDI_STREAM_INPUT
, &snd_usbmidi_input_ops
);
1778 umidi
->rmidi
= rmidi
;
1783 * Temporarily stop input.
1785 void snd_usbmidi_input_stop(struct list_head
* p
)
1787 struct snd_usb_midi
* umidi
;
1790 umidi
= list_entry(p
, struct snd_usb_midi
, list
);
1791 for (i
= 0; i
< MIDI_MAX_ENDPOINTS
; ++i
) {
1792 struct snd_usb_midi_endpoint
* ep
= &umidi
->endpoints
[i
];
1794 for (j
= 0; j
< INPUT_URBS
; ++j
)
1795 usb_kill_urb(ep
->in
->urbs
[j
]);
1799 static void snd_usbmidi_input_start_ep(struct snd_usb_midi_in_endpoint
* ep
)
1805 for (i
= 0; i
< INPUT_URBS
; ++i
) {
1806 struct urb
* urb
= ep
->urbs
[i
];
1807 urb
->dev
= ep
->umidi
->chip
->dev
;
1808 snd_usbmidi_submit_urb(urb
, GFP_KERNEL
);
1813 * Resume input after a call to snd_usbmidi_input_stop().
1815 void snd_usbmidi_input_start(struct list_head
* p
)
1817 struct snd_usb_midi
* umidi
;
1820 umidi
= list_entry(p
, struct snd_usb_midi
, list
);
1821 for (i
= 0; i
< MIDI_MAX_ENDPOINTS
; ++i
)
1822 snd_usbmidi_input_start_ep(umidi
->endpoints
[i
].in
);
1826 * Creates and registers everything needed for a MIDI streaming interface.
1828 int snd_usb_create_midi_interface(struct snd_usb_audio
* chip
,
1829 struct usb_interface
* iface
,
1830 const struct snd_usb_audio_quirk
* quirk
)
1832 struct snd_usb_midi
* umidi
;
1833 struct snd_usb_midi_endpoint_info endpoints
[MIDI_MAX_ENDPOINTS
];
1834 int out_ports
, in_ports
;
1837 umidi
= kzalloc(sizeof(*umidi
), GFP_KERNEL
);
1841 umidi
->iface
= iface
;
1842 umidi
->quirk
= quirk
;
1843 umidi
->usb_protocol_ops
= &snd_usbmidi_standard_ops
;
1844 init_timer(&umidi
->error_timer
);
1845 spin_lock_init(&umidi
->disc_lock
);
1846 umidi
->error_timer
.function
= snd_usbmidi_error_timer
;
1847 umidi
->error_timer
.data
= (unsigned long)umidi
;
1849 /* detect the endpoint(s) to use */
1850 memset(endpoints
, 0, sizeof(endpoints
));
1851 switch (quirk
? quirk
->type
: QUIRK_MIDI_STANDARD_INTERFACE
) {
1852 case QUIRK_MIDI_STANDARD_INTERFACE
:
1853 err
= snd_usbmidi_get_ms_info(umidi
, endpoints
);
1854 if (chip
->usb_id
== USB_ID(0x0763, 0x0150)) /* M-Audio Uno */
1855 umidi
->usb_protocol_ops
=
1856 &snd_usbmidi_maudio_broken_running_status_ops
;
1858 case QUIRK_MIDI_US122L
:
1859 umidi
->usb_protocol_ops
= &snd_usbmidi_122l_ops
;
1861 case QUIRK_MIDI_FIXED_ENDPOINT
:
1862 memcpy(&endpoints
[0], quirk
->data
,
1863 sizeof(struct snd_usb_midi_endpoint_info
));
1864 err
= snd_usbmidi_detect_endpoints(umidi
, &endpoints
[0], 1);
1866 case QUIRK_MIDI_YAMAHA
:
1867 err
= snd_usbmidi_detect_yamaha(umidi
, &endpoints
[0]);
1869 case QUIRK_MIDI_MIDIMAN
:
1870 umidi
->usb_protocol_ops
= &snd_usbmidi_midiman_ops
;
1871 memcpy(&endpoints
[0], quirk
->data
,
1872 sizeof(struct snd_usb_midi_endpoint_info
));
1875 case QUIRK_MIDI_NOVATION
:
1876 umidi
->usb_protocol_ops
= &snd_usbmidi_novation_ops
;
1877 err
= snd_usbmidi_detect_per_port_endpoints(umidi
, endpoints
);
1879 case QUIRK_MIDI_FASTLANE
:
1880 umidi
->usb_protocol_ops
= &snd_usbmidi_raw_ops
;
1882 * Interface 1 contains isochronous endpoints, but with the same
1883 * numbers as in interface 0. Since it is interface 1 that the
1884 * USB core has most recently seen, these descriptors are now
1885 * associated with the endpoint numbers. This will foul up our
1886 * attempts to submit bulk/interrupt URBs to the endpoints in
1887 * interface 0, so we have to make sure that the USB core looks
1888 * again at interface 0 by calling usb_set_interface() on it.
1890 usb_set_interface(umidi
->chip
->dev
, 0, 0);
1891 err
= snd_usbmidi_detect_per_port_endpoints(umidi
, endpoints
);
1893 case QUIRK_MIDI_EMAGIC
:
1894 umidi
->usb_protocol_ops
= &snd_usbmidi_emagic_ops
;
1895 memcpy(&endpoints
[0], quirk
->data
,
1896 sizeof(struct snd_usb_midi_endpoint_info
));
1897 err
= snd_usbmidi_detect_endpoints(umidi
, &endpoints
[0], 1);
1899 case QUIRK_MIDI_CME
:
1900 umidi
->usb_protocol_ops
= &snd_usbmidi_cme_ops
;
1901 err
= snd_usbmidi_detect_per_port_endpoints(umidi
, endpoints
);
1904 snd_printd(KERN_ERR
"invalid quirk type %d\n", quirk
->type
);
1913 /* create rawmidi device */
1916 for (i
= 0; i
< MIDI_MAX_ENDPOINTS
; ++i
) {
1917 out_ports
+= snd_usbmidi_count_bits(endpoints
[i
].out_cables
);
1918 in_ports
+= snd_usbmidi_count_bits(endpoints
[i
].in_cables
);
1920 err
= snd_usbmidi_create_rawmidi(umidi
, out_ports
, in_ports
);
1926 /* create endpoint/port structures */
1927 if (quirk
&& quirk
->type
== QUIRK_MIDI_MIDIMAN
)
1928 err
= snd_usbmidi_create_endpoints_midiman(umidi
, &endpoints
[0]);
1930 err
= snd_usbmidi_create_endpoints(umidi
, endpoints
);
1932 snd_usbmidi_free(umidi
);
1936 list_add(&umidi
->list
, &umidi
->chip
->midi_list
);
1938 for (i
= 0; i
< MIDI_MAX_ENDPOINTS
; ++i
)
1939 snd_usbmidi_input_start_ep(umidi
->endpoints
[i
].in
);
1943 EXPORT_SYMBOL(snd_usb_create_midi_interface
);
1944 EXPORT_SYMBOL(snd_usbmidi_input_stop
);
1945 EXPORT_SYMBOL(snd_usbmidi_input_start
);
1946 EXPORT_SYMBOL(snd_usbmidi_disconnect
);