Save sram context after changing MPU, DSP or core clocks
[linux-ginger.git] / drivers / ieee1394 / highlevel.h
blob9dba89fc60ada2e1489a60cc950f39a2f170f5b0
1 #ifndef IEEE1394_HIGHLEVEL_H
2 #define IEEE1394_HIGHLEVEL_H
4 #include <linux/list.h>
5 #include <linux/spinlock.h>
6 #include <linux/types.h>
8 struct module;
10 #include "ieee1394_types.h"
12 struct hpsb_host;
14 /* internal to ieee1394 core */
15 struct hpsb_address_serve {
16 struct list_head host_list; /* per host list */
17 struct list_head hl_list; /* hpsb_highlevel list */
18 const struct hpsb_address_ops *op;
19 struct hpsb_host *host;
20 u64 start; /* first address handled, quadlet aligned */
21 u64 end; /* first address behind, quadlet aligned */
24 /* Only the following structures are of interest to actual highlevel drivers. */
26 struct hpsb_highlevel {
27 const char *name;
29 /* Any of the following pointers can legally be NULL. */
31 /* New host initialized. Will also be called during
32 * hpsb_register_highlevel for all hosts already installed. */
33 void (*add_host)(struct hpsb_host *host);
35 /* Host about to be removed. Will also be called during
36 * hpsb_unregister_highlevel once for each host. */
37 void (*remove_host)(struct hpsb_host *host);
39 /* Host experienced bus reset with possible configuration changes.
40 * Note that this one may occur during interrupt/bottom half handling.
41 * You can not expect to be able to do stock hpsb_reads. */
42 void (*host_reset)(struct hpsb_host *host);
44 /* A write request was received on either the FCP_COMMAND (direction =
45 * 0) or the FCP_RESPONSE (direction = 1) register. The cts arg
46 * contains the cts field (first byte of data). */
47 void (*fcp_request)(struct hpsb_host *host, int nodeid, int direction,
48 int cts, u8 *data, size_t length);
50 /* These are initialized by the subsystem when the
51 * hpsb_higlevel is registered. */
52 struct list_head hl_list;
53 struct list_head irq_list;
54 struct list_head addr_list;
56 struct list_head host_info_list;
57 rwlock_t host_info_lock;
60 struct hpsb_address_ops {
62 * Null function pointers will make the respective operation complete
63 * with RCODE_TYPE_ERROR. Makes for easy to implement read-only
64 * registers (just leave everything but read NULL).
66 * All functions shall return appropriate IEEE 1394 rcodes.
69 /* These functions have to implement block reads for themselves.
71 * These functions either return a response code or a negative number.
72 * In the first case a response will be generated. In the latter case,
73 * no response will be sent and the driver which handled the request
74 * will send the response itself. */
75 int (*read)(struct hpsb_host *host, int nodeid, quadlet_t *buffer,
76 u64 addr, size_t length, u16 flags);
77 int (*write)(struct hpsb_host *host, int nodeid, int destid,
78 quadlet_t *data, u64 addr, size_t length, u16 flags);
80 /* Lock transactions: write results of ext_tcode operation into
81 * *store. */
82 int (*lock)(struct hpsb_host *host, int nodeid, quadlet_t *store,
83 u64 addr, quadlet_t data, quadlet_t arg, int ext_tcode,
84 u16 flags);
85 int (*lock64)(struct hpsb_host *host, int nodeid, octlet_t *store,
86 u64 addr, octlet_t data, octlet_t arg, int ext_tcode,
87 u16 flags);
90 void highlevel_add_host(struct hpsb_host *host);
91 void highlevel_remove_host(struct hpsb_host *host);
92 void highlevel_host_reset(struct hpsb_host *host);
93 int highlevel_read(struct hpsb_host *host, int nodeid, void *data, u64 addr,
94 unsigned int length, u16 flags);
95 int highlevel_write(struct hpsb_host *host, int nodeid, int destid, void *data,
96 u64 addr, unsigned int length, u16 flags);
97 int highlevel_lock(struct hpsb_host *host, int nodeid, quadlet_t *store,
98 u64 addr, quadlet_t data, quadlet_t arg, int ext_tcode,
99 u16 flags);
100 int highlevel_lock64(struct hpsb_host *host, int nodeid, octlet_t *store,
101 u64 addr, octlet_t data, octlet_t arg, int ext_tcode,
102 u16 flags);
103 void highlevel_fcp_request(struct hpsb_host *host, int nodeid, int direction,
104 void *data, size_t length);
107 * hpsb_init_highlevel - initialize a struct hpsb_highlevel
109 * This is only necessary if hpsb_get_hostinfo_bykey can be called
110 * before hpsb_register_highlevel.
112 static inline void hpsb_init_highlevel(struct hpsb_highlevel *hl)
114 rwlock_init(&hl->host_info_lock);
115 INIT_LIST_HEAD(&hl->host_info_list);
117 void hpsb_register_highlevel(struct hpsb_highlevel *hl);
118 void hpsb_unregister_highlevel(struct hpsb_highlevel *hl);
120 u64 hpsb_allocate_and_register_addrspace(struct hpsb_highlevel *hl,
121 struct hpsb_host *host,
122 const struct hpsb_address_ops *ops,
123 u64 size, u64 alignment,
124 u64 start, u64 end);
125 int hpsb_register_addrspace(struct hpsb_highlevel *hl, struct hpsb_host *host,
126 const struct hpsb_address_ops *ops,
127 u64 start, u64 end);
128 int hpsb_unregister_addrspace(struct hpsb_highlevel *hl, struct hpsb_host *host,
129 u64 start);
131 void *hpsb_get_hostinfo(struct hpsb_highlevel *hl, struct hpsb_host *host);
132 void *hpsb_create_hostinfo(struct hpsb_highlevel *hl, struct hpsb_host *host,
133 size_t data_size);
134 void hpsb_destroy_hostinfo(struct hpsb_highlevel *hl, struct hpsb_host *host);
135 void hpsb_set_hostinfo_key(struct hpsb_highlevel *hl, struct hpsb_host *host,
136 unsigned long key);
137 void *hpsb_get_hostinfo_bykey(struct hpsb_highlevel *hl, unsigned long key);
138 int hpsb_set_hostinfo(struct hpsb_highlevel *hl, struct hpsb_host *host,
139 void *data);
141 #endif /* IEEE1394_HIGHLEVEL_H */