2 * Copyright 2008 Analog Devices Inc.
4 * Licensed under the ADI BSD license or the GPL-2 (or later)
10 /* Include all Core registers and bit definitions */
11 #include <asm/def_LPBlackfin.h>
13 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */
15 /* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */
16 #include "defBF54x_base.h"
18 /* The following are the #defines needed by ADSP-BF548 that are not in the common header */
22 #define TIMER8_CONFIG 0xffc00600 /* Timer 8 Configuration Register */
23 #define TIMER8_COUNTER 0xffc00604 /* Timer 8 Counter Register */
24 #define TIMER8_PERIOD 0xffc00608 /* Timer 8 Period Register */
25 #define TIMER8_WIDTH 0xffc0060c /* Timer 8 Width Register */
26 #define TIMER9_CONFIG 0xffc00610 /* Timer 9 Configuration Register */
27 #define TIMER9_COUNTER 0xffc00614 /* Timer 9 Counter Register */
28 #define TIMER9_PERIOD 0xffc00618 /* Timer 9 Period Register */
29 #define TIMER9_WIDTH 0xffc0061c /* Timer 9 Width Register */
30 #define TIMER10_CONFIG 0xffc00620 /* Timer 10 Configuration Register */
31 #define TIMER10_COUNTER 0xffc00624 /* Timer 10 Counter Register */
32 #define TIMER10_PERIOD 0xffc00628 /* Timer 10 Period Register */
33 #define TIMER10_WIDTH 0xffc0062c /* Timer 10 Width Register */
35 /* Timer Group of 3 Registers */
37 #define TIMER_ENABLE1 0xffc00640 /* Timer Group of 3 Enable Register */
38 #define TIMER_DISABLE1 0xffc00644 /* Timer Group of 3 Disable Register */
39 #define TIMER_STATUS1 0xffc00648 /* Timer Group of 3 Status Register */
41 /* SPORT0 Registers */
43 #define SPORT0_TCR1 0xffc00800 /* SPORT0 Transmit Configuration 1 Register */
44 #define SPORT0_TCR2 0xffc00804 /* SPORT0 Transmit Configuration 2 Register */
45 #define SPORT0_TCLKDIV 0xffc00808 /* SPORT0 Transmit Serial Clock Divider Register */
46 #define SPORT0_TFSDIV 0xffc0080c /* SPORT0 Transmit Frame Sync Divider Register */
47 #define SPORT0_TX 0xffc00810 /* SPORT0 Transmit Data Register */
48 #define SPORT0_RX 0xffc00818 /* SPORT0 Receive Data Register */
49 #define SPORT0_RCR1 0xffc00820 /* SPORT0 Receive Configuration 1 Register */
50 #define SPORT0_RCR2 0xffc00824 /* SPORT0 Receive Configuration 2 Register */
51 #define SPORT0_RCLKDIV 0xffc00828 /* SPORT0 Receive Serial Clock Divider Register */
52 #define SPORT0_RFSDIV 0xffc0082c /* SPORT0 Receive Frame Sync Divider Register */
53 #define SPORT0_STAT 0xffc00830 /* SPORT0 Status Register */
54 #define SPORT0_CHNL 0xffc00834 /* SPORT0 Current Channel Register */
55 #define SPORT0_MCMC1 0xffc00838 /* SPORT0 Multi channel Configuration Register 1 */
56 #define SPORT0_MCMC2 0xffc0083c /* SPORT0 Multi channel Configuration Register 2 */
57 #define SPORT0_MTCS0 0xffc00840 /* SPORT0 Multi channel Transmit Select Register 0 */
58 #define SPORT0_MTCS1 0xffc00844 /* SPORT0 Multi channel Transmit Select Register 1 */
59 #define SPORT0_MTCS2 0xffc00848 /* SPORT0 Multi channel Transmit Select Register 2 */
60 #define SPORT0_MTCS3 0xffc0084c /* SPORT0 Multi channel Transmit Select Register 3 */
61 #define SPORT0_MRCS0 0xffc00850 /* SPORT0 Multi channel Receive Select Register 0 */
62 #define SPORT0_MRCS1 0xffc00854 /* SPORT0 Multi channel Receive Select Register 1 */
63 #define SPORT0_MRCS2 0xffc00858 /* SPORT0 Multi channel Receive Select Register 2 */
64 #define SPORT0_MRCS3 0xffc0085c /* SPORT0 Multi channel Receive Select Register 3 */
68 #define EPPI0_STATUS 0xffc01000 /* EPPI0 Status Register */
69 #define EPPI0_HCOUNT 0xffc01004 /* EPPI0 Horizontal Transfer Count Register */
70 #define EPPI0_HDELAY 0xffc01008 /* EPPI0 Horizontal Delay Count Register */
71 #define EPPI0_VCOUNT 0xffc0100c /* EPPI0 Vertical Transfer Count Register */
72 #define EPPI0_VDELAY 0xffc01010 /* EPPI0 Vertical Delay Count Register */
73 #define EPPI0_FRAME 0xffc01014 /* EPPI0 Lines per Frame Register */
74 #define EPPI0_LINE 0xffc01018 /* EPPI0 Samples per Line Register */
75 #define EPPI0_CLKDIV 0xffc0101c /* EPPI0 Clock Divide Register */
76 #define EPPI0_CONTROL 0xffc01020 /* EPPI0 Control Register */
77 #define EPPI0_FS1W_HBL 0xffc01024 /* EPPI0 FS1 Width Register / EPPI0 Horizontal Blanking Samples Per Line Register */
78 #define EPPI0_FS1P_AVPL 0xffc01028 /* EPPI0 FS1 Period Register / EPPI0 Active Video Samples Per Line Register */
79 #define EPPI0_FS2W_LVB 0xffc0102c /* EPPI0 FS2 Width Register / EPPI0 Lines of Vertical Blanking Register */
80 #define EPPI0_FS2P_LAVF 0xffc01030 /* EPPI0 FS2 Period Register/ EPPI0 Lines of Active Video Per Field Register */
81 #define EPPI0_CLIP 0xffc01034 /* EPPI0 Clipping Register */
85 #define UART2_DLL 0xffc02100 /* Divisor Latch Low Byte */
86 #define UART2_DLH 0xffc02104 /* Divisor Latch High Byte */
87 #define UART2_GCTL 0xffc02108 /* Global Control Register */
88 #define UART2_LCR 0xffc0210c /* Line Control Register */
89 #define UART2_MCR 0xffc02110 /* Modem Control Register */
90 #define UART2_LSR 0xffc02114 /* Line Status Register */
91 #define UART2_MSR 0xffc02118 /* Modem Status Register */
92 #define UART2_SCR 0xffc0211c /* Scratch Register */
93 #define UART2_IER_SET 0xffc02120 /* Interrupt Enable Register Set */
94 #define UART2_IER_CLEAR 0xffc02124 /* Interrupt Enable Register Clear */
95 #define UART2_RBR 0xffc0212c /* Receive Buffer Register */
97 /* Two Wire Interface Registers (TWI1) */
99 #define TWI1_REGBASE 0xffc02200
100 #define TWI1_CLKDIV 0xffc02200 /* Clock Divider Register */
101 #define TWI1_CONTROL 0xffc02204 /* TWI Control Register */
102 #define TWI1_SLAVE_CTRL 0xffc02208 /* TWI Slave Mode Control Register */
103 #define TWI1_SLAVE_STAT 0xffc0220c /* TWI Slave Mode Status Register */
104 #define TWI1_SLAVE_ADDR 0xffc02210 /* TWI Slave Mode Address Register */
105 #define TWI1_MASTER_CTRL 0xffc02214 /* TWI Master Mode Control Register */
106 #define TWI1_MASTER_STAT 0xffc02218 /* TWI Master Mode Status Register */
107 #define TWI1_MASTER_ADDR 0xffc0221c /* TWI Master Mode Address Register */
108 #define TWI1_INT_STAT 0xffc02220 /* TWI Interrupt Status Register */
109 #define TWI1_INT_MASK 0xffc02224 /* TWI Interrupt Mask Register */
110 #define TWI1_FIFO_CTRL 0xffc02228 /* TWI FIFO Control Register */
111 #define TWI1_FIFO_STAT 0xffc0222c /* TWI FIFO Status Register */
112 #define TWI1_XMT_DATA8 0xffc02280 /* TWI FIFO Transmit Data Single Byte Register */
113 #define TWI1_XMT_DATA16 0xffc02284 /* TWI FIFO Transmit Data Double Byte Register */
114 #define TWI1_RCV_DATA8 0xffc02288 /* TWI FIFO Receive Data Single Byte Register */
115 #define TWI1_RCV_DATA16 0xffc0228c /* TWI FIFO Receive Data Double Byte Register */
119 #define SPI2_REGBASE 0xffc02400
120 #define SPI2_CTL 0xffc02400 /* SPI2 Control Register */
121 #define SPI2_FLG 0xffc02404 /* SPI2 Flag Register */
122 #define SPI2_STAT 0xffc02408 /* SPI2 Status Register */
123 #define SPI2_TDBR 0xffc0240c /* SPI2 Transmit Data Buffer Register */
124 #define SPI2_RDBR 0xffc02410 /* SPI2 Receive Data Buffer Register */
125 #define SPI2_BAUD 0xffc02414 /* SPI2 Baud Rate Register */
126 #define SPI2_SHADOW 0xffc02418 /* SPI2 Receive Data Buffer Shadow Register */
128 /* ATAPI Registers */
130 #define ATAPI_CONTROL 0xffc03800 /* ATAPI Control Register */
131 #define ATAPI_STATUS 0xffc03804 /* ATAPI Status Register */
132 #define ATAPI_DEV_ADDR 0xffc03808 /* ATAPI Device Register Address */
133 #define ATAPI_DEV_TXBUF 0xffc0380c /* ATAPI Device Register Write Data */
134 #define ATAPI_DEV_RXBUF 0xffc03810 /* ATAPI Device Register Read Data */
135 #define ATAPI_INT_MASK 0xffc03814 /* ATAPI Interrupt Mask Register */
136 #define ATAPI_INT_STATUS 0xffc03818 /* ATAPI Interrupt Status Register */
137 #define ATAPI_XFER_LEN 0xffc0381c /* ATAPI Length of Transfer */
138 #define ATAPI_LINE_STATUS 0xffc03820 /* ATAPI Line Status */
139 #define ATAPI_SM_STATE 0xffc03824 /* ATAPI State Machine Status */
140 #define ATAPI_TERMINATE 0xffc03828 /* ATAPI Host Terminate */
141 #define ATAPI_PIO_TFRCNT 0xffc0382c /* ATAPI PIO mode transfer count */
142 #define ATAPI_DMA_TFRCNT 0xffc03830 /* ATAPI DMA mode transfer count */
143 #define ATAPI_UMAIN_TFRCNT 0xffc03834 /* ATAPI UDMAIN transfer count */
144 #define ATAPI_UDMAOUT_TFRCNT 0xffc03838 /* ATAPI UDMAOUT transfer count */
145 #define ATAPI_REG_TIM_0 0xffc03840 /* ATAPI Register Transfer Timing 0 */
146 #define ATAPI_PIO_TIM_0 0xffc03844 /* ATAPI PIO Timing 0 Register */
147 #define ATAPI_PIO_TIM_1 0xffc03848 /* ATAPI PIO Timing 1 Register */
148 #define ATAPI_MULTI_TIM_0 0xffc03850 /* ATAPI Multi-DMA Timing 0 Register */
149 #define ATAPI_MULTI_TIM_1 0xffc03854 /* ATAPI Multi-DMA Timing 1 Register */
150 #define ATAPI_MULTI_TIM_2 0xffc03858 /* ATAPI Multi-DMA Timing 2 Register */
151 #define ATAPI_ULTRA_TIM_0 0xffc03860 /* ATAPI Ultra-DMA Timing 0 Register */
152 #define ATAPI_ULTRA_TIM_1 0xffc03864 /* ATAPI Ultra-DMA Timing 1 Register */
153 #define ATAPI_ULTRA_TIM_2 0xffc03868 /* ATAPI Ultra-DMA Timing 2 Register */
154 #define ATAPI_ULTRA_TIM_3 0xffc0386c /* ATAPI Ultra-DMA Timing 3 Register */
158 #define SDH_PWR_CTL 0xffc03900 /* SDH Power Control */
159 #define SDH_CLK_CTL 0xffc03904 /* SDH Clock Control */
160 #define SDH_ARGUMENT 0xffc03908 /* SDH Argument */
161 #define SDH_COMMAND 0xffc0390c /* SDH Command */
162 #define SDH_RESP_CMD 0xffc03910 /* SDH Response Command */
163 #define SDH_RESPONSE0 0xffc03914 /* SDH Response0 */
164 #define SDH_RESPONSE1 0xffc03918 /* SDH Response1 */
165 #define SDH_RESPONSE2 0xffc0391c /* SDH Response2 */
166 #define SDH_RESPONSE3 0xffc03920 /* SDH Response3 */
167 #define SDH_DATA_TIMER 0xffc03924 /* SDH Data Timer */
168 #define SDH_DATA_LGTH 0xffc03928 /* SDH Data Length */
169 #define SDH_DATA_CTL 0xffc0392c /* SDH Data Control */
170 #define SDH_DATA_CNT 0xffc03930 /* SDH Data Counter */
171 #define SDH_STATUS 0xffc03934 /* SDH Status */
172 #define SDH_STATUS_CLR 0xffc03938 /* SDH Status Clear */
173 #define SDH_MASK0 0xffc0393c /* SDH Interrupt0 Mask */
174 #define SDH_MASK1 0xffc03940 /* SDH Interrupt1 Mask */
175 #define SDH_FIFO_CNT 0xffc03948 /* SDH FIFO Counter */
176 #define SDH_FIFO 0xffc03980 /* SDH Data FIFO */
177 #define SDH_E_STATUS 0xffc039c0 /* SDH Exception Status */
178 #define SDH_E_MASK 0xffc039c4 /* SDH Exception Mask */
179 #define SDH_CFG 0xffc039c8 /* SDH Configuration */
180 #define SDH_RD_WAIT_EN 0xffc039cc /* SDH Read Wait Enable */
181 #define SDH_PID0 0xffc039d0 /* SDH Peripheral Identification0 */
182 #define SDH_PID1 0xffc039d4 /* SDH Peripheral Identification1 */
183 #define SDH_PID2 0xffc039d8 /* SDH Peripheral Identification2 */
184 #define SDH_PID3 0xffc039dc /* SDH Peripheral Identification3 */
185 #define SDH_PID4 0xffc039e0 /* SDH Peripheral Identification4 */
186 #define SDH_PID5 0xffc039e4 /* SDH Peripheral Identification5 */
187 #define SDH_PID6 0xffc039e8 /* SDH Peripheral Identification6 */
188 #define SDH_PID7 0xffc039ec /* SDH Peripheral Identification7 */
190 /* HOST Port Registers */
192 #define HOST_CONTROL 0xffc03a00 /* HOST Control Register */
193 #define HOST_STATUS 0xffc03a04 /* HOST Status Register */
194 #define HOST_TIMEOUT 0xffc03a08 /* HOST Acknowledge Mode Timeout Register */
196 /* USB Control Registers */
198 #define USB_FADDR 0xffc03c00 /* Function address register */
199 #define USB_POWER 0xffc03c04 /* Power management register */
200 #define USB_INTRTX 0xffc03c08 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */
201 #define USB_INTRRX 0xffc03c0c /* Interrupt register for Rx endpoints 1 to 7 */
202 #define USB_INTRTXE 0xffc03c10 /* Interrupt enable register for IntrTx */
203 #define USB_INTRRXE 0xffc03c14 /* Interrupt enable register for IntrRx */
204 #define USB_INTRUSB 0xffc03c18 /* Interrupt register for common USB interrupts */
205 #define USB_INTRUSBE 0xffc03c1c /* Interrupt enable register for IntrUSB */
206 #define USB_FRAME 0xffc03c20 /* USB frame number */
207 #define USB_INDEX 0xffc03c24 /* Index register for selecting the indexed endpoint registers */
208 #define USB_TESTMODE 0xffc03c28 /* Enabled USB 20 test modes */
209 #define USB_GLOBINTR 0xffc03c2c /* Global Interrupt Mask register and Wakeup Exception Interrupt */
210 #define USB_GLOBAL_CTL 0xffc03c30 /* Global Clock Control for the core */
212 /* USB Packet Control Registers */
214 #define USB_TX_MAX_PACKET 0xffc03c40 /* Maximum packet size for Host Tx endpoint */
215 #define USB_CSR0 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
216 #define USB_TXCSR 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
217 #define USB_RX_MAX_PACKET 0xffc03c48 /* Maximum packet size for Host Rx endpoint */
218 #define USB_RXCSR 0xffc03c4c /* Control Status register for Host Rx endpoint */
219 #define USB_COUNT0 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
220 #define USB_RXCOUNT 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
221 #define USB_TXTYPE 0xffc03c54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */
222 #define USB_NAKLIMIT0 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
223 #define USB_TXINTERVAL 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
224 #define USB_RXTYPE 0xffc03c5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */
225 #define USB_RXINTERVAL 0xffc03c60 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */
226 #define USB_TXCOUNT 0xffc03c68 /* Number of bytes to be written to the selected endpoint Tx FIFO */
228 /* USB Endpoint FIFO Registers */
230 #define USB_EP0_FIFO 0xffc03c80 /* Endpoint 0 FIFO */
231 #define USB_EP1_FIFO 0xffc03c88 /* Endpoint 1 FIFO */
232 #define USB_EP2_FIFO 0xffc03c90 /* Endpoint 2 FIFO */
233 #define USB_EP3_FIFO 0xffc03c98 /* Endpoint 3 FIFO */
234 #define USB_EP4_FIFO 0xffc03ca0 /* Endpoint 4 FIFO */
235 #define USB_EP5_FIFO 0xffc03ca8 /* Endpoint 5 FIFO */
236 #define USB_EP6_FIFO 0xffc03cb0 /* Endpoint 6 FIFO */
237 #define USB_EP7_FIFO 0xffc03cb8 /* Endpoint 7 FIFO */
239 /* USB OTG Control Registers */
241 #define USB_OTG_DEV_CTL 0xffc03d00 /* OTG Device Control Register */
242 #define USB_OTG_VBUS_IRQ 0xffc03d04 /* OTG VBUS Control Interrupts */
243 #define USB_OTG_VBUS_MASK 0xffc03d08 /* VBUS Control Interrupt Enable */
245 /* USB Phy Control Registers */
247 #define USB_LINKINFO 0xffc03d48 /* Enables programming of some PHY-side delays */
248 #define USB_VPLEN 0xffc03d4c /* Determines duration of VBUS pulse for VBUS charging */
249 #define USB_HS_EOF1 0xffc03d50 /* Time buffer for High-Speed transactions */
250 #define USB_FS_EOF1 0xffc03d54 /* Time buffer for Full-Speed transactions */
251 #define USB_LS_EOF1 0xffc03d58 /* Time buffer for Low-Speed transactions */
253 /* (APHY_CNTRL is for ADI usage only) */
255 #define USB_APHY_CNTRL 0xffc03de0 /* Register that increases visibility of Analog PHY */
257 /* (APHY_CALIB is for ADI usage only) */
259 #define USB_APHY_CALIB 0xffc03de4 /* Register used to set some calibration values */
260 #define USB_APHY_CNTRL2 0xffc03de8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
262 /* (PHY_TEST is for ADI usage only) */
264 #define USB_PHY_TEST 0xffc03dec /* Used for reducing simulation time and simplifies FIFO testability */
265 #define USB_PLLOSC_CTRL 0xffc03df0 /* Used to program different parameters for USB PLL and Oscillator */
266 #define USB_SRP_CLKDIV 0xffc03df4 /* Used to program clock divide value for the clock fed to the SRP detection logic */
268 /* USB Endpoint 0 Control Registers */
270 #define USB_EP_NI0_TXMAXP 0xffc03e00 /* Maximum packet size for Host Tx endpoint0 */
271 #define USB_EP_NI0_TXCSR 0xffc03e04 /* Control Status register for endpoint 0 */
272 #define USB_EP_NI0_RXMAXP 0xffc03e08 /* Maximum packet size for Host Rx endpoint0 */
273 #define USB_EP_NI0_RXCSR 0xffc03e0c /* Control Status register for Host Rx endpoint0 */
274 #define USB_EP_NI0_RXCOUNT 0xffc03e10 /* Number of bytes received in endpoint 0 FIFO */
275 #define USB_EP_NI0_TXTYPE 0xffc03e14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */
276 #define USB_EP_NI0_TXINTERVAL 0xffc03e18 /* Sets the NAK response timeout on Endpoint 0 */
277 #define USB_EP_NI0_RXTYPE 0xffc03e1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */
278 #define USB_EP_NI0_RXINTERVAL 0xffc03e20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */
280 /* USB Endpoint 1 Control Registers */
282 #define USB_EP_NI0_TXCOUNT 0xffc03e28 /* Number of bytes to be written to the endpoint0 Tx FIFO */
283 #define USB_EP_NI1_TXMAXP 0xffc03e40 /* Maximum packet size for Host Tx endpoint1 */
284 #define USB_EP_NI1_TXCSR 0xffc03e44 /* Control Status register for endpoint1 */
285 #define USB_EP_NI1_RXMAXP 0xffc03e48 /* Maximum packet size for Host Rx endpoint1 */
286 #define USB_EP_NI1_RXCSR 0xffc03e4c /* Control Status register for Host Rx endpoint1 */
287 #define USB_EP_NI1_RXCOUNT 0xffc03e50 /* Number of bytes received in endpoint1 FIFO */
288 #define USB_EP_NI1_TXTYPE 0xffc03e54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */
289 #define USB_EP_NI1_TXINTERVAL 0xffc03e58 /* Sets the NAK response timeout on Endpoint1 */
290 #define USB_EP_NI1_RXTYPE 0xffc03e5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */
291 #define USB_EP_NI1_RXINTERVAL 0xffc03e60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */
293 /* USB Endpoint 2 Control Registers */
295 #define USB_EP_NI1_TXCOUNT 0xffc03e68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
296 #define USB_EP_NI2_TXMAXP 0xffc03e80 /* Maximum packet size for Host Tx endpoint2 */
297 #define USB_EP_NI2_TXCSR 0xffc03e84 /* Control Status register for endpoint2 */
298 #define USB_EP_NI2_RXMAXP 0xffc03e88 /* Maximum packet size for Host Rx endpoint2 */
299 #define USB_EP_NI2_RXCSR 0xffc03e8c /* Control Status register for Host Rx endpoint2 */
300 #define USB_EP_NI2_RXCOUNT 0xffc03e90 /* Number of bytes received in endpoint2 FIFO */
301 #define USB_EP_NI2_TXTYPE 0xffc03e94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */
302 #define USB_EP_NI2_TXINTERVAL 0xffc03e98 /* Sets the NAK response timeout on Endpoint2 */
303 #define USB_EP_NI2_RXTYPE 0xffc03e9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */
304 #define USB_EP_NI2_RXINTERVAL 0xffc03ea0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */
306 /* USB Endpoint 3 Control Registers */
308 #define USB_EP_NI2_TXCOUNT 0xffc03ea8 /* Number of bytes to be written to the endpoint2 Tx FIFO */
309 #define USB_EP_NI3_TXMAXP 0xffc03ec0 /* Maximum packet size for Host Tx endpoint3 */
310 #define USB_EP_NI3_TXCSR 0xffc03ec4 /* Control Status register for endpoint3 */
311 #define USB_EP_NI3_RXMAXP 0xffc03ec8 /* Maximum packet size for Host Rx endpoint3 */
312 #define USB_EP_NI3_RXCSR 0xffc03ecc /* Control Status register for Host Rx endpoint3 */
313 #define USB_EP_NI3_RXCOUNT 0xffc03ed0 /* Number of bytes received in endpoint3 FIFO */
314 #define USB_EP_NI3_TXTYPE 0xffc03ed4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */
315 #define USB_EP_NI3_TXINTERVAL 0xffc03ed8 /* Sets the NAK response timeout on Endpoint3 */
316 #define USB_EP_NI3_RXTYPE 0xffc03edc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */
317 #define USB_EP_NI3_RXINTERVAL 0xffc03ee0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */
319 /* USB Endpoint 4 Control Registers */
321 #define USB_EP_NI3_TXCOUNT 0xffc03ee8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
322 #define USB_EP_NI4_TXMAXP 0xffc03f00 /* Maximum packet size for Host Tx endpoint4 */
323 #define USB_EP_NI4_TXCSR 0xffc03f04 /* Control Status register for endpoint4 */
324 #define USB_EP_NI4_RXMAXP 0xffc03f08 /* Maximum packet size for Host Rx endpoint4 */
325 #define USB_EP_NI4_RXCSR 0xffc03f0c /* Control Status register for Host Rx endpoint4 */
326 #define USB_EP_NI4_RXCOUNT 0xffc03f10 /* Number of bytes received in endpoint4 FIFO */
327 #define USB_EP_NI4_TXTYPE 0xffc03f14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */
328 #define USB_EP_NI4_TXINTERVAL 0xffc03f18 /* Sets the NAK response timeout on Endpoint4 */
329 #define USB_EP_NI4_RXTYPE 0xffc03f1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */
330 #define USB_EP_NI4_RXINTERVAL 0xffc03f20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */
332 /* USB Endpoint 5 Control Registers */
334 #define USB_EP_NI4_TXCOUNT 0xffc03f28 /* Number of bytes to be written to the endpoint4 Tx FIFO */
335 #define USB_EP_NI5_TXMAXP 0xffc03f40 /* Maximum packet size for Host Tx endpoint5 */
336 #define USB_EP_NI5_TXCSR 0xffc03f44 /* Control Status register for endpoint5 */
337 #define USB_EP_NI5_RXMAXP 0xffc03f48 /* Maximum packet size for Host Rx endpoint5 */
338 #define USB_EP_NI5_RXCSR 0xffc03f4c /* Control Status register for Host Rx endpoint5 */
339 #define USB_EP_NI5_RXCOUNT 0xffc03f50 /* Number of bytes received in endpoint5 FIFO */
340 #define USB_EP_NI5_TXTYPE 0xffc03f54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */
341 #define USB_EP_NI5_TXINTERVAL 0xffc03f58 /* Sets the NAK response timeout on Endpoint5 */
342 #define USB_EP_NI5_RXTYPE 0xffc03f5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */
343 #define USB_EP_NI5_RXINTERVAL 0xffc03f60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */
345 /* USB Endpoint 6 Control Registers */
347 #define USB_EP_NI5_TXCOUNT 0xffc03f68 /* Number of bytes to be written to the H145endpoint5 Tx FIFO */
348 #define USB_EP_NI6_TXMAXP 0xffc03f80 /* Maximum packet size for Host Tx endpoint6 */
349 #define USB_EP_NI6_TXCSR 0xffc03f84 /* Control Status register for endpoint6 */
350 #define USB_EP_NI6_RXMAXP 0xffc03f88 /* Maximum packet size for Host Rx endpoint6 */
351 #define USB_EP_NI6_RXCSR 0xffc03f8c /* Control Status register for Host Rx endpoint6 */
352 #define USB_EP_NI6_RXCOUNT 0xffc03f90 /* Number of bytes received in endpoint6 FIFO */
353 #define USB_EP_NI6_TXTYPE 0xffc03f94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */
354 #define USB_EP_NI6_TXINTERVAL 0xffc03f98 /* Sets the NAK response timeout on Endpoint6 */
355 #define USB_EP_NI6_RXTYPE 0xffc03f9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */
356 #define USB_EP_NI6_RXINTERVAL 0xffc03fa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */
358 /* USB Endpoint 7 Control Registers */
360 #define USB_EP_NI6_TXCOUNT 0xffc03fa8 /* Number of bytes to be written to the endpoint6 Tx FIFO */
361 #define USB_EP_NI7_TXMAXP 0xffc03fc0 /* Maximum packet size for Host Tx endpoint7 */
362 #define USB_EP_NI7_TXCSR 0xffc03fc4 /* Control Status register for endpoint7 */
363 #define USB_EP_NI7_RXMAXP 0xffc03fc8 /* Maximum packet size for Host Rx endpoint7 */
364 #define USB_EP_NI7_RXCSR 0xffc03fcc /* Control Status register for Host Rx endpoint7 */
365 #define USB_EP_NI7_RXCOUNT 0xffc03fd0 /* Number of bytes received in endpoint7 FIFO */
366 #define USB_EP_NI7_TXTYPE 0xffc03fd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
367 #define USB_EP_NI7_TXINTERVAL 0xffc03fd8 /* Sets the NAK response timeout on Endpoint7 */
368 #define USB_EP_NI7_RXTYPE 0xffc03fdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
369 #define USB_EP_NI7_RXINTERVAL 0xffc03ff0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
370 #define USB_EP_NI7_TXCOUNT 0xffc03ff8 /* Number of bytes to be written to the endpoint7 Tx FIFO */
371 #define USB_DMA_INTERRUPT 0xffc04000 /* Indicates pending interrupts for the DMA channels */
373 /* USB Channel 0 Config Registers */
375 #define USB_DMA0CONTROL 0xffc04004 /* DMA master channel 0 configuration */
376 #define USB_DMA0ADDRLOW 0xffc04008 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */
377 #define USB_DMA0ADDRHIGH 0xffc0400c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */
378 #define USB_DMA0COUNTLOW 0xffc04010 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */
379 #define USB_DMA0COUNTHIGH 0xffc04014 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */
381 /* USB Channel 1 Config Registers */
383 #define USB_DMA1CONTROL 0xffc04024 /* DMA master channel 1 configuration */
384 #define USB_DMA1ADDRLOW 0xffc04028 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */
385 #define USB_DMA1ADDRHIGH 0xffc0402c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */
386 #define USB_DMA1COUNTLOW 0xffc04030 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */
387 #define USB_DMA1COUNTHIGH 0xffc04034 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */
389 /* USB Channel 2 Config Registers */
391 #define USB_DMA2CONTROL 0xffc04044 /* DMA master channel 2 configuration */
392 #define USB_DMA2ADDRLOW 0xffc04048 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */
393 #define USB_DMA2ADDRHIGH 0xffc0404c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */
394 #define USB_DMA2COUNTLOW 0xffc04050 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */
395 #define USB_DMA2COUNTHIGH 0xffc04054 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */
397 /* USB Channel 3 Config Registers */
399 #define USB_DMA3CONTROL 0xffc04064 /* DMA master channel 3 configuration */
400 #define USB_DMA3ADDRLOW 0xffc04068 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */
401 #define USB_DMA3ADDRHIGH 0xffc0406c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */
402 #define USB_DMA3COUNTLOW 0xffc04070 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */
403 #define USB_DMA3COUNTHIGH 0xffc04074 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */
405 /* USB Channel 4 Config Registers */
407 #define USB_DMA4CONTROL 0xffc04084 /* DMA master channel 4 configuration */
408 #define USB_DMA4ADDRLOW 0xffc04088 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */
409 #define USB_DMA4ADDRHIGH 0xffc0408c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */
410 #define USB_DMA4COUNTLOW 0xffc04090 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */
411 #define USB_DMA4COUNTHIGH 0xffc04094 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */
413 /* USB Channel 5 Config Registers */
415 #define USB_DMA5CONTROL 0xffc040a4 /* DMA master channel 5 configuration */
416 #define USB_DMA5ADDRLOW 0xffc040a8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */
417 #define USB_DMA5ADDRHIGH 0xffc040ac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */
418 #define USB_DMA5COUNTLOW 0xffc040b0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */
419 #define USB_DMA5COUNTHIGH 0xffc040b4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */
421 /* USB Channel 6 Config Registers */
423 #define USB_DMA6CONTROL 0xffc040c4 /* DMA master channel 6 configuration */
424 #define USB_DMA6ADDRLOW 0xffc040c8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */
425 #define USB_DMA6ADDRHIGH 0xffc040cc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */
426 #define USB_DMA6COUNTLOW 0xffc040d0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */
427 #define USB_DMA6COUNTHIGH 0xffc040d4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */
429 /* USB Channel 7 Config Registers */
431 #define USB_DMA7CONTROL 0xffc040e4 /* DMA master channel 7 configuration */
432 #define USB_DMA7ADDRLOW 0xffc040e8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */
433 #define USB_DMA7ADDRHIGH 0xffc040ec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */
434 #define USB_DMA7COUNTLOW 0xffc040f0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */
435 #define USB_DMA7COUNTHIGH 0xffc040f4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */
437 /* Keypad Registers */
439 #define KPAD_CTL 0xffc04100 /* Controls keypad module enable and disable */
440 #define KPAD_PRESCALE 0xffc04104 /* Establish a time base for programing the KPAD_MSEL register */
441 #define KPAD_MSEL 0xffc04108 /* Selects delay parameters for keypad interface sensitivity */
442 #define KPAD_ROWCOL 0xffc0410c /* Captures the row and column output values of the keys pressed */
443 #define KPAD_STAT 0xffc04110 /* Holds and clears the status of the keypad interface interrupt */
444 #define KPAD_SOFTEVAL 0xffc04114 /* Lets software force keypad interface to check for keys being pressed */
446 /* Pixel Compositor (PIXC) Registers */
448 #define PIXC_CTL 0xffc04400 /* Overlay enable, resampling mode, I/O data format, transparency enable, watermark level, FIFO status */
449 #define PIXC_PPL 0xffc04404 /* Holds the number of pixels per line of the display */
450 #define PIXC_LPF 0xffc04408 /* Holds the number of lines per frame of the display */
451 #define PIXC_AHSTART 0xffc0440c /* Contains horizontal start pixel information of the overlay data (set A) */
452 #define PIXC_AHEND 0xffc04410 /* Contains horizontal end pixel information of the overlay data (set A) */
453 #define PIXC_AVSTART 0xffc04414 /* Contains vertical start pixel information of the overlay data (set A) */
454 #define PIXC_AVEND 0xffc04418 /* Contains vertical end pixel information of the overlay data (set A) */
455 #define PIXC_ATRANSP 0xffc0441c /* Contains the transparency ratio (set A) */
456 #define PIXC_BHSTART 0xffc04420 /* Contains horizontal start pixel information of the overlay data (set B) */
457 #define PIXC_BHEND 0xffc04424 /* Contains horizontal end pixel information of the overlay data (set B) */
458 #define PIXC_BVSTART 0xffc04428 /* Contains vertical start pixel information of the overlay data (set B) */
459 #define PIXC_BVEND 0xffc0442c /* Contains vertical end pixel information of the overlay data (set B) */
460 #define PIXC_BTRANSP 0xffc04430 /* Contains the transparency ratio (set B) */
461 #define PIXC_INTRSTAT 0xffc0443c /* Overlay interrupt configuration/status */
462 #define PIXC_RYCON 0xffc04440 /* Color space conversion matrix register. Contains the R/Y conversion coefficients */
463 #define PIXC_GUCON 0xffc04444 /* Color space conversion matrix register. Contains the G/U conversion coefficients */
464 #define PIXC_BVCON 0xffc04448 /* Color space conversion matrix register. Contains the B/V conversion coefficients */
465 #define PIXC_CCBIAS 0xffc0444c /* Bias values for the color space conversion matrix */
466 #define PIXC_TC 0xffc04450 /* Holds the transparent color value */
468 /* Handshake MDMA 0 Registers */
470 #define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */
471 #define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */
472 #define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */
473 #define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshhold Register */
474 #define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */
475 #define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */
476 #define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */
478 /* Handshake MDMA 1 Registers */
480 #define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */
481 #define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */
482 #define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */
483 #define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshhold Register */
484 #define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */
485 #define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */
486 #define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */
489 /* ********************************************************** */
490 /* SINGLE BIT MACRO PAIRS (bit mask and negated one) */
491 /* and MULTI BIT READ MACROS */
492 /* ********************************************************** */
494 /* Bit masks for PIXC_CTL */
496 #define PIXC_EN 0x1 /* Pixel Compositor Enable */
497 #define OVR_A_EN 0x2 /* Overlay A Enable */
498 #define OVR_B_EN 0x4 /* Overlay B Enable */
499 #define IMG_FORM 0x8 /* Image Data Format */
500 #define OVR_FORM 0x10 /* Overlay Data Format */
501 #define OUT_FORM 0x20 /* Output Data Format */
502 #define UDS_MOD 0x40 /* Resampling Mode */
503 #define TC_EN 0x80 /* Transparent Color Enable */
504 #define IMG_STAT 0x300 /* Image FIFO Status */
505 #define OVR_STAT 0xc00 /* Overlay FIFO Status */
506 #define WM_LVL 0x3000 /* FIFO Watermark Level */
508 /* Bit masks for PIXC_AHSTART */
510 #define A_HSTART 0xfff /* Horizontal Start Coordinates */
512 /* Bit masks for PIXC_AHEND */
514 #define A_HEND 0xfff /* Horizontal End Coordinates */
516 /* Bit masks for PIXC_AVSTART */
518 #define A_VSTART 0x3ff /* Vertical Start Coordinates */
520 /* Bit masks for PIXC_AVEND */
522 #define A_VEND 0x3ff /* Vertical End Coordinates */
524 /* Bit masks for PIXC_ATRANSP */
526 #define A_TRANSP 0xf /* Transparency Value */
528 /* Bit masks for PIXC_BHSTART */
530 #define B_HSTART 0xfff /* Horizontal Start Coordinates */
532 /* Bit masks for PIXC_BHEND */
534 #define B_HEND 0xfff /* Horizontal End Coordinates */
536 /* Bit masks for PIXC_BVSTART */
538 #define B_VSTART 0x3ff /* Vertical Start Coordinates */
540 /* Bit masks for PIXC_BVEND */
542 #define B_VEND 0x3ff /* Vertical End Coordinates */
544 /* Bit masks for PIXC_BTRANSP */
546 #define B_TRANSP 0xf /* Transparency Value */
548 /* Bit masks for PIXC_INTRSTAT */
550 #define OVR_INT_EN 0x1 /* Interrupt at End of Last Valid Overlay */
551 #define FRM_INT_EN 0x2 /* Interrupt at End of Frame */
552 #define OVR_INT_STAT 0x4 /* Overlay Interrupt Status */
553 #define FRM_INT_STAT 0x8 /* Frame Interrupt Status */
555 /* Bit masks for PIXC_RYCON */
557 #define A11 0x3ff /* A11 in the Coefficient Matrix */
558 #define A12 0xffc00 /* A12 in the Coefficient Matrix */
559 #define A13 0x3ff00000 /* A13 in the Coefficient Matrix */
560 #define RY_MULT4 0x40000000 /* Multiply Row by 4 */
562 /* Bit masks for PIXC_GUCON */
564 #define A21 0x3ff /* A21 in the Coefficient Matrix */
565 #define A22 0xffc00 /* A22 in the Coefficient Matrix */
566 #define A23 0x3ff00000 /* A23 in the Coefficient Matrix */
567 #define GU_MULT4 0x40000000 /* Multiply Row by 4 */
569 /* Bit masks for PIXC_BVCON */
571 #define A31 0x3ff /* A31 in the Coefficient Matrix */
572 #define A32 0xffc00 /* A32 in the Coefficient Matrix */
573 #define A33 0x3ff00000 /* A33 in the Coefficient Matrix */
574 #define BV_MULT4 0x40000000 /* Multiply Row by 4 */
576 /* Bit masks for PIXC_CCBIAS */
578 #define A14 0x3ff /* A14 in the Bias Vector */
579 #define A24 0xffc00 /* A24 in the Bias Vector */
580 #define A34 0x3ff00000 /* A34 in the Bias Vector */
582 /* Bit masks for PIXC_TC */
584 #define RY_TRANS 0xff /* Transparent Color - R/Y Component */
585 #define GU_TRANS 0xff00 /* Transparent Color - G/U Component */
586 #define BV_TRANS 0xff0000 /* Transparent Color - B/V Component */
588 /* Bit masks for HOST_CONTROL */
590 #define HOST_EN 0x1 /* Host Enable */
591 #define HOST_END 0x2 /* Host Endianess */
592 #define DATA_SIZE 0x4 /* Data Size */
593 #define HOST_RST 0x8 /* Host Reset */
594 #define HRDY_OVR 0x20 /* Host Ready Override */
595 #define INT_MODE 0x40 /* Interrupt Mode */
596 #define BT_EN 0x80 /* Bus Timeout Enable */
597 #define EHW 0x100 /* Enable Host Write */
598 #define EHR 0x200 /* Enable Host Read */
599 #define BDR 0x400 /* Burst DMA Requests */
601 /* Bit masks for HOST_STATUS */
603 #define DMA_READY 0x1 /* DMA Ready */
604 #define FIFOFULL 0x2 /* FIFO Full */
605 #define FIFOEMPTY 0x4 /* FIFO Empty */
606 #define DMA_COMPLETE 0x8 /* DMA Complete */
607 #define HSHK 0x10 /* Host Handshake */
608 #define HSTIMEOUT 0x20 /* Host Timeout */
609 #define HIRQ 0x40 /* Host Interrupt Request */
610 #define ALLOW_CNFG 0x80 /* Allow New Configuration */
611 #define DMA_DIR 0x100 /* DMA Direction */
612 #define BTE 0x200 /* Bus Timeout Enabled */
614 /* Bit masks for HOST_TIMEOUT */
616 #define COUNT_TIMEOUT 0x7ff /* Host Timeout count */
618 /* Bit masks for KPAD_CTL */
620 #define KPAD_EN 0x1 /* Keypad Enable */
621 #define KPAD_IRQMODE 0x6 /* Key Press Interrupt Enable */
622 #define KPAD_ROWEN 0x1c00 /* Row Enable Width */
623 #define KPAD_COLEN 0xe000 /* Column Enable Width */
625 /* Bit masks for KPAD_PRESCALE */
627 #define KPAD_PRESCALE_VAL 0x3f /* Key Prescale Value */
629 /* Bit masks for KPAD_MSEL */
631 #define DBON_SCALE 0xff /* Debounce Scale Value */
632 #define COLDRV_SCALE 0xff00 /* Column Driver Scale Value */
634 /* Bit masks for KPAD_ROWCOL */
636 #define KPAD_ROW 0xff /* Rows Pressed */
637 #define KPAD_COL 0xff00 /* Columns Pressed */
639 /* Bit masks for KPAD_STAT */
641 #define KPAD_IRQ 0x1 /* Keypad Interrupt Status */
642 #define KPAD_MROWCOL 0x6 /* Multiple Row/Column Keypress Status */
643 #define KPAD_PRESSED 0x8 /* Key press current status */
645 /* Bit masks for KPAD_SOFTEVAL */
647 #define KPAD_SOFTEVAL_E 0x2 /* Software Programmable Force Evaluate */
649 /* Bit masks for SDH_COMMAND */
651 #define CMD_IDX 0x3f /* Command Index */
652 #define CMD_RSP 0x40 /* Response */
653 #define CMD_L_RSP 0x80 /* Long Response */
654 #define CMD_INT_E 0x100 /* Command Interrupt */
655 #define CMD_PEND_E 0x200 /* Command Pending */
656 #define CMD_E 0x400 /* Command Enable */
658 /* Bit masks for SDH_PWR_CTL */
660 #define PWR_ON 0x3 /* Power On */
662 #define TBD 0x3c /* TBD */
664 #define SD_CMD_OD 0x40 /* Open Drain Output */
665 #define ROD_CTL 0x80 /* Rod Control */
667 /* Bit masks for SDH_CLK_CTL */
669 #define CLKDIV 0xff /* MC_CLK Divisor */
670 #define CLK_E 0x100 /* MC_CLK Bus Clock Enable */
671 #define PWR_SV_E 0x200 /* Power Save Enable */
672 #define CLKDIV_BYPASS 0x400 /* Bypass Divisor */
673 #define WIDE_BUS 0x800 /* Wide Bus Mode Enable */
675 /* Bit masks for SDH_RESP_CMD */
677 #define RESP_CMD 0x3f /* Response Command */
679 /* Bit masks for SDH_DATA_CTL */
681 #define DTX_E 0x1 /* Data Transfer Enable */
682 #define DTX_DIR 0x2 /* Data Transfer Direction */
683 #define DTX_MODE 0x4 /* Data Transfer Mode */
684 #define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */
685 #define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */
687 /* Bit masks for SDH_STATUS */
689 #define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */
690 #define DAT_CRC_FAIL 0x2 /* Data CRC Fail */
691 #define CMD_TIME_OUT 0x4 /* CMD Time Out */
692 #define DAT_TIME_OUT 0x8 /* Data Time Out */
693 #define TX_UNDERRUN 0x10 /* Transmit Underrun */
694 #define RX_OVERRUN 0x20 /* Receive Overrun */
695 #define CMD_RESP_END 0x40 /* CMD Response End */
696 #define CMD_SENT 0x80 /* CMD Sent */
697 #define DAT_END 0x100 /* Data End */
698 #define START_BIT_ERR 0x200 /* Start Bit Error */
699 #define DAT_BLK_END 0x400 /* Data Block End */
700 #define CMD_ACT 0x800 /* CMD Active */
701 #define TX_ACT 0x1000 /* Transmit Active */
702 #define RX_ACT 0x2000 /* Receive Active */
703 #define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */
704 #define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */
705 #define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */
706 #define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */
707 #define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */
708 #define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */
709 #define TX_DAT_RDY 0x100000 /* Transmit Data Available */
710 #define RX_FIFO_RDY 0x200000 /* Receive Data Available */
712 /* Bit masks for SDH_STATUS_CLR */
714 #define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */
715 #define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */
716 #define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */
717 #define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */
718 #define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */
719 #define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */
720 #define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */
721 #define CMD_SENT_STAT 0x80 /* CMD Sent Status */
722 #define DAT_END_STAT 0x100 /* Data End Status */
723 #define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */
724 #define DAT_BLK_END_STAT 0x400 /* Data Block End Status */
726 /* Bit masks for SDH_MASK0 */
728 #define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */
729 #define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */
730 #define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */
731 #define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */
732 #define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */
733 #define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */
734 #define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */
735 #define CMD_SENT_MASK 0x80 /* CMD Sent Mask */
736 #define DAT_END_MASK 0x100 /* Data End Mask */
737 #define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */
738 #define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */
739 #define CMD_ACT_MASK 0x800 /* CMD Active Mask */
740 #define TX_ACT_MASK 0x1000 /* Transmit Active Mask */
741 #define RX_ACT_MASK 0x2000 /* Receive Active Mask */
742 #define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */
743 #define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */
744 #define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */
745 #define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */
746 #define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */
747 #define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */
748 #define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */
749 #define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */
751 /* Bit masks for SDH_FIFO_CNT */
753 #define FIFO_COUNT 0x7fff /* FIFO Count */
755 /* Bit masks for SDH_E_STATUS */
757 #define SDIO_INT_DET 0x2 /* SDIO Int Detected */
758 #define SD_CARD_DET 0x10 /* SD Card Detect */
760 /* Bit masks for SDH_E_MASK */
762 #define SDIO_MSK 0x2 /* Mask SDIO Int Detected */
763 #define SCD_MSK 0x40 /* Mask Card Detect */
765 /* Bit masks for SDH_CFG */
767 #define CLKS_EN 0x1 /* Clocks Enable */
768 #define SD4E 0x4 /* SDIO 4-Bit Enable */
769 #define MWE 0x8 /* Moving Window Enable */
770 #define SD_RST 0x10 /* SDMMC Reset */
771 #define PUP_SDDAT 0x20 /* Pull-up SD_DAT */
772 #define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */
773 #define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */
775 /* Bit masks for SDH_RD_WAIT_EN */
777 #define RWR 0x1 /* Read Wait Request */
779 /* Bit masks for ATAPI_CONTROL */
781 #define PIO_START 0x1 /* Start PIO/Reg Op */
782 #define MULTI_START 0x2 /* Start Multi-DMA Op */
783 #define ULTRA_START 0x4 /* Start Ultra-DMA Op */
784 #define XFER_DIR 0x8 /* Transfer Direction */
785 #define IORDY_EN 0x10 /* IORDY Enable */
786 #define FIFO_FLUSH 0x20 /* Flush FIFOs */
787 #define SOFT_RST 0x40 /* Soft Reset */
788 #define DEV_RST 0x80 /* Device Reset */
789 #define TFRCNT_RST 0x100 /* Trans Count Reset */
790 #define END_ON_TERM 0x200 /* End/Terminate Select */
791 #define PIO_USE_DMA 0x400 /* PIO-DMA Enable */
792 #define UDMAIN_FIFO_THRS 0xf000 /* Ultra DMA-IN FIFO Threshold */
794 /* Bit masks for ATAPI_STATUS */
796 #define PIO_XFER_ON 0x1 /* PIO transfer in progress */
797 #define MULTI_XFER_ON 0x2 /* Multi-word DMA transfer in progress */
798 #define ULTRA_XFER_ON 0x4 /* Ultra DMA transfer in progress */
799 #define ULTRA_IN_FL 0xf0 /* Ultra DMA Input FIFO Level */
801 /* Bit masks for ATAPI_DEV_ADDR */
803 #define DEV_ADDR 0x1f /* Device Address */
805 /* Bit masks for ATAPI_INT_MASK */
807 #define ATAPI_DEV_INT_MASK 0x1 /* Device interrupt mask */
808 #define PIO_DONE_MASK 0x2 /* PIO transfer done interrupt mask */
809 #define MULTI_DONE_MASK 0x4 /* Multi-DMA transfer done interrupt mask */
810 #define UDMAIN_DONE_MASK 0x8 /* Ultra-DMA in transfer done interrupt mask */
811 #define UDMAOUT_DONE_MASK 0x10 /* Ultra-DMA out transfer done interrupt mask */
812 #define HOST_TERM_XFER_MASK 0x20 /* Host terminate current transfer interrupt mask */
813 #define MULTI_TERM_MASK 0x40 /* Device terminate Multi-DMA transfer interrupt mask */
814 #define UDMAIN_TERM_MASK 0x80 /* Device terminate Ultra-DMA-in transfer interrupt mask */
815 #define UDMAOUT_TERM_MASK 0x100 /* Device terminate Ultra-DMA-out transfer interrupt mask */
817 /* Bit masks for ATAPI_INT_STATUS */
819 #define ATAPI_DEV_INT 0x1 /* Device interrupt status */
820 #define PIO_DONE_INT 0x2 /* PIO transfer done interrupt status */
821 #define MULTI_DONE_INT 0x4 /* Multi-DMA transfer done interrupt status */
822 #define UDMAIN_DONE_INT 0x8 /* Ultra-DMA in transfer done interrupt status */
823 #define UDMAOUT_DONE_INT 0x10 /* Ultra-DMA out transfer done interrupt status */
824 #define HOST_TERM_XFER_INT 0x20 /* Host terminate current transfer interrupt status */
825 #define MULTI_TERM_INT 0x40 /* Device terminate Multi-DMA transfer interrupt status */
826 #define UDMAIN_TERM_INT 0x80 /* Device terminate Ultra-DMA-in transfer interrupt status */
827 #define UDMAOUT_TERM_INT 0x100 /* Device terminate Ultra-DMA-out transfer interrupt status */
829 /* Bit masks for ATAPI_LINE_STATUS */
831 #define ATAPI_INTR 0x1 /* Device interrupt to host line status */
832 #define ATAPI_DASP 0x2 /* Device dasp to host line status */
833 #define ATAPI_CS0N 0x4 /* ATAPI chip select 0 line status */
834 #define ATAPI_CS1N 0x8 /* ATAPI chip select 1 line status */
835 #define ATAPI_ADDR 0x70 /* ATAPI address line status */
836 #define ATAPI_DMAREQ 0x80 /* ATAPI DMA request line status */
837 #define ATAPI_DMAACKN 0x100 /* ATAPI DMA acknowledge line status */
838 #define ATAPI_DIOWN 0x200 /* ATAPI write line status */
839 #define ATAPI_DIORN 0x400 /* ATAPI read line status */
840 #define ATAPI_IORDY 0x800 /* ATAPI IORDY line status */
842 /* Bit masks for ATAPI_SM_STATE */
844 #define PIO_CSTATE 0xf /* PIO mode state machine current state */
845 #define DMA_CSTATE 0xf0 /* DMA mode state machine current state */
846 #define UDMAIN_CSTATE 0xf00 /* Ultra DMA-In mode state machine current state */
847 #define UDMAOUT_CSTATE 0xf000 /* ATAPI IORDY line status */
849 /* Bit masks for ATAPI_TERMINATE */
851 #define ATAPI_HOST_TERM 0x1 /* Host terminationation */
853 /* Bit masks for ATAPI_REG_TIM_0 */
855 #define T2_REG 0xff /* End of cycle time for register access transfers */
856 #define TEOC_REG 0xff00 /* Selects DIOR/DIOW pulsewidth */
858 /* Bit masks for ATAPI_PIO_TIM_0 */
860 #define T1_REG 0xf /* Time from address valid to DIOR/DIOW */
861 #define T2_REG_PIO 0xff0 /* DIOR/DIOW pulsewidth */
862 #define T4_REG 0xf000 /* DIOW data hold */
864 /* Bit masks for ATAPI_PIO_TIM_1 */
866 #define TEOC_REG_PIO 0xff /* End of cycle time for PIO access transfers. */
868 /* Bit masks for ATAPI_MULTI_TIM_0 */
870 #define TD 0xff /* DIOR/DIOW asserted pulsewidth */
871 #define TM 0xff00 /* Time from address valid to DIOR/DIOW */
873 /* Bit masks for ATAPI_MULTI_TIM_1 */
875 #define TKW 0xff /* Selects DIOW negated pulsewidth */
876 #define TKR 0xff00 /* Selects DIOR negated pulsewidth */
878 /* Bit masks for ATAPI_MULTI_TIM_2 */
880 #define TH 0xff /* Selects DIOW data hold */
881 #define TEOC 0xff00 /* Selects end of cycle for DMA */
883 /* Bit masks for ATAPI_ULTRA_TIM_0 */
885 #define TACK 0xff /* Selects setup and hold times for TACK */
886 #define TENV 0xff00 /* Selects envelope time */
888 /* Bit masks for ATAPI_ULTRA_TIM_1 */
890 #define TDVS 0xff /* Selects data valid setup time */
891 #define TCYC_TDVS 0xff00 /* Selects cycle time - TDVS time */
893 /* Bit masks for ATAPI_ULTRA_TIM_2 */
895 #define TSS 0xff /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */
896 #define TMLI 0xff00 /* Selects interlock time */
898 /* Bit masks for ATAPI_ULTRA_TIM_3 */
900 #define TZAH 0xff /* Selects minimum delay required for output */
901 #define READY_PAUSE 0xff00 /* Selects ready to pause */
903 /* Bit masks for TIMER_ENABLE1 */
905 #define TIMEN8 0x1 /* Timer 8 Enable */
906 #define TIMEN9 0x2 /* Timer 9 Enable */
907 #define TIMEN10 0x4 /* Timer 10 Enable */
909 /* Bit masks for TIMER_DISABLE1 */
911 #define TIMDIS8 0x1 /* Timer 8 Disable */
912 #define TIMDIS9 0x2 /* Timer 9 Disable */
913 #define TIMDIS10 0x4 /* Timer 10 Disable */
915 /* Bit masks for TIMER_STATUS1 */
917 #define TIMIL8 0x1 /* Timer 8 Interrupt */
918 #define TIMIL9 0x2 /* Timer 9 Interrupt */
919 #define TIMIL10 0x4 /* Timer 10 Interrupt */
920 #define TOVF_ERR8 0x10 /* Timer 8 Counter Overflow */
921 #define TOVF_ERR9 0x20 /* Timer 9 Counter Overflow */
922 #define TOVF_ERR10 0x40 /* Timer 10 Counter Overflow */
923 #define TRUN8 0x1000 /* Timer 8 Slave Enable Status */
924 #define TRUN9 0x2000 /* Timer 9 Slave Enable Status */
925 #define TRUN10 0x4000 /* Timer 10 Slave Enable Status */
927 /* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */
929 /* Bit masks for USB_FADDR */
931 #define FUNCTION_ADDRESS 0x7f /* Function address */
933 /* Bit masks for USB_POWER */
935 #define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */
936 #define SUSPEND_MODE 0x2 /* Suspend Mode indicator */
937 #define RESUME_MODE 0x4 /* DMA Mode */
938 #define RESET 0x8 /* Reset indicator */
939 #define HS_MODE 0x10 /* High Speed mode indicator */
940 #define HS_ENABLE 0x20 /* high Speed Enable */
941 #define SOFT_CONN 0x40 /* Soft connect */
942 #define ISO_UPDATE 0x80 /* Isochronous update */
944 /* Bit masks for USB_INTRTX */
946 #define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */
947 #define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */
948 #define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */
949 #define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */
950 #define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */
951 #define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */
952 #define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */
953 #define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */
955 /* Bit masks for USB_INTRRX */
957 #define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */
958 #define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */
959 #define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */
960 #define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */
961 #define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */
962 #define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */
963 #define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */
965 /* Bit masks for USB_INTRTXE */
967 #define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */
968 #define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */
969 #define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */
970 #define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */
971 #define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */
972 #define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */
973 #define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */
974 #define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */
976 /* Bit masks for USB_INTRRXE */
978 #define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */
979 #define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */
980 #define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */
981 #define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */
982 #define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */
983 #define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */
984 #define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */
986 /* Bit masks for USB_INTRUSB */
988 #define SUSPEND_B 0x1 /* Suspend indicator */
989 #define RESUME_B 0x2 /* Resume indicator */
990 #define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */
991 #define SOF_B 0x8 /* Start of frame */
992 #define CONN_B 0x10 /* Connection indicator */
993 #define DISCON_B 0x20 /* Disconnect indicator */
994 #define SESSION_REQ_B 0x40 /* Session Request */
995 #define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */
997 /* Bit masks for USB_INTRUSBE */
999 #define SUSPEND_BE 0x1 /* Suspend indicator int enable */
1000 #define RESUME_BE 0x2 /* Resume indicator int enable */
1001 #define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */
1002 #define SOF_BE 0x8 /* Start of frame int enable */
1003 #define CONN_BE 0x10 /* Connection indicator int enable */
1004 #define DISCON_BE 0x20 /* Disconnect indicator int enable */
1005 #define SESSION_REQ_BE 0x40 /* Session Request int enable */
1006 #define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */
1008 /* Bit masks for USB_FRAME */
1010 #define FRAME_NUMBER 0x7ff /* Frame number */
1012 /* Bit masks for USB_INDEX */
1014 #define SELECTED_ENDPOINT 0xf /* selected endpoint */
1016 /* Bit masks for USB_GLOBAL_CTL */
1018 #define GLOBAL_ENA 0x1 /* enables USB module */
1019 #define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */
1020 #define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */
1021 #define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */
1022 #define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */
1023 #define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */
1024 #define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */
1025 #define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */
1026 #define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */
1027 #define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */
1028 #define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */
1029 #define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */
1030 #define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */
1031 #define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */
1032 #define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */
1034 /* Bit masks for USB_OTG_DEV_CTL */
1036 #define SESSION 0x1 /* session indicator */
1037 #define HOST_REQ 0x2 /* Host negotiation request */
1038 #define HOST_MODE 0x4 /* indicates USBDRC is a host */
1039 #define VBUS0 0x8 /* Vbus level indicator[0] */
1040 #define VBUS1 0x10 /* Vbus level indicator[1] */
1041 #define LSDEV 0x20 /* Low-speed indicator */
1042 #define FSDEV 0x40 /* Full or High-speed indicator */
1043 #define B_DEVICE 0x80 /* A' or 'B' device indicator */
1045 /* Bit masks for USB_OTG_VBUS_IRQ */
1047 #define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */
1048 #define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */
1049 #define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */
1050 #define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */
1051 #define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */
1052 #define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */
1054 /* Bit masks for USB_OTG_VBUS_MASK */
1056 #define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */
1057 #define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */
1058 #define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */
1059 #define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */
1060 #define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */
1061 #define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */
1063 /* Bit masks for USB_CSR0 */
1065 #define RXPKTRDY 0x1 /* data packet receive indicator */
1066 #define TXPKTRDY 0x2 /* data packet in FIFO indicator */
1067 #define STALL_SENT 0x4 /* STALL handshake sent */
1068 #define DATAEND 0x8 /* Data end indicator */
1069 #define SETUPEND 0x10 /* Setup end */
1070 #define SENDSTALL 0x20 /* Send STALL handshake */
1071 #define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */
1072 #define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */
1073 #define FLUSHFIFO 0x100 /* flush endpoint FIFO */
1074 #define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */
1075 #define SETUPPKT_H 0x8 /* send Setup token host mode */
1076 #define ERROR_H 0x10 /* timeout error indicator host mode */
1077 #define REQPKT_H 0x20 /* Request an IN transaction host mode */
1078 #define STATUSPKT_H 0x40 /* Status stage transaction host mode */
1079 #define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */
1081 /* Bit masks for USB_COUNT0 */
1083 #define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */
1085 /* Bit masks for USB_NAKLIMIT0 */
1087 #define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */
1089 /* Bit masks for USB_TX_MAX_PACKET */
1091 #define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */
1093 /* Bit masks for USB_RX_MAX_PACKET */
1095 #define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */
1097 /* Bit masks for USB_TXCSR */
1099 #define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */
1100 #define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */
1101 #define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */
1102 #define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */
1103 #define STALL_SEND_T 0x10 /* issue a Stall handshake */
1104 #define STALL_SENT_T 0x20 /* Stall handshake transmitted */
1105 #define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */
1106 #define INCOMPTX_T 0x80 /* indicates that a large packet is split */
1107 #define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */
1108 #define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */
1109 #define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */
1110 #define ISO_T 0x4000 /* enable Isochronous transfers */
1111 #define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */
1112 #define ERROR_TH 0x4 /* error condition host mode */
1113 #define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */
1114 #define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */
1116 /* Bit masks for USB_TXCOUNT */
1118 #define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */
1120 /* Bit masks for USB_RXCSR */
1122 #define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */
1123 #define FIFO_FULL_R 0x2 /* FIFO not empty */
1124 #define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */
1125 #define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */
1126 #define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */
1127 #define STALL_SEND_R 0x20 /* issue a Stall handshake */
1128 #define STALL_SENT_R 0x40 /* Stall handshake transmitted */
1129 #define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */
1130 #define INCOMPRX_R 0x100 /* indicates that a large packet is split */
1131 #define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */
1132 #define DISNYET_R 0x1000 /* disable Nyet handshakes */
1133 #define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */
1134 #define ISO_R 0x4000 /* enable Isochronous transfers */
1135 #define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */
1136 #define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */
1137 #define REQPKT_RH 0x20 /* request an IN transaction host mode */
1138 #define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */
1139 #define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */
1140 #define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */
1141 #define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */
1143 /* Bit masks for USB_RXCOUNT */
1145 #define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */
1147 /* Bit masks for USB_TXTYPE */
1149 #define TARGET_EP_NO_T 0xf /* EP number */
1150 #define PROTOCOL_T 0xc /* transfer type */
1152 /* Bit masks for USB_TXINTERVAL */
1154 #define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */
1156 /* Bit masks for USB_RXTYPE */
1158 #define TARGET_EP_NO_R 0xf /* EP number */
1159 #define PROTOCOL_R 0xc /* transfer type */
1161 /* Bit masks for USB_RXINTERVAL */
1163 #define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */
1165 /* Bit masks for USB_DMA_INTERRUPT */
1167 #define DMA0_INT 0x1 /* DMA0 pending interrupt */
1168 #define DMA1_INT 0x2 /* DMA1 pending interrupt */
1169 #define DMA2_INT 0x4 /* DMA2 pending interrupt */
1170 #define DMA3_INT 0x8 /* DMA3 pending interrupt */
1171 #define DMA4_INT 0x10 /* DMA4 pending interrupt */
1172 #define DMA5_INT 0x20 /* DMA5 pending interrupt */
1173 #define DMA6_INT 0x40 /* DMA6 pending interrupt */
1174 #define DMA7_INT 0x80 /* DMA7 pending interrupt */
1176 /* Bit masks for USB_DMAxCONTROL */
1178 #define DMA_ENA 0x1 /* DMA enable */
1179 #define DIRECTION 0x2 /* direction of DMA transfer */
1180 #define MODE 0x4 /* DMA Bus error */
1181 #define INT_ENA 0x8 /* Interrupt enable */
1182 #define EPNUM 0xf0 /* EP number */
1183 #define BUSERROR 0x100 /* DMA Bus error */
1185 /* Bit masks for USB_DMAxADDRHIGH */
1187 #define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */
1189 /* Bit masks for USB_DMAxADDRLOW */
1191 #define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */
1193 /* Bit masks for USB_DMAxCOUNTHIGH */
1195 #define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */
1197 /* Bit masks for USB_DMAxCOUNTLOW */
1199 #define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */
1201 /* Bit masks for HMDMAx_CONTROL */
1203 #define HMDMAEN 0x1 /* Handshake MDMA Enable */
1204 #define REP 0x2 /* Handshake MDMA Request Polarity */
1205 #define UTE 0x8 /* Urgency Threshold Enable */
1206 #define OIE 0x10 /* Overflow Interrupt Enable */
1207 #define BDIE 0x20 /* Block Done Interrupt Enable */
1208 #define MBDI 0x40 /* Mask Block Done Interrupt */
1209 #define DRQ 0x300 /* Handshake MDMA Request Type */
1210 #define RBC 0x1000 /* Force Reload of BCOUNT */
1211 #define PS 0x2000 /* Pin Status */
1212 #define OI 0x4000 /* Overflow Interrupt Generated */
1213 #define BDI 0x8000 /* Block Done Interrupt Generated */
1215 /* ******************************************* */
1216 /* MULTI BIT MACRO ENUMERATIONS */
1217 /* ******************************************* */
1220 #endif /* _DEF_BF548_H */
