1 /* Load firmware into Core B on a BF561
3 * Copyright 2004-2009 Analog Devices Inc.
4 * Licensed under the GPL-2 or later.
7 /* The Core B reset func requires code in the application that is loaded into
8 * Core B. In order to reset, the application needs to install an interrupt
9 * handler for Supplemental Interrupt 0, that sets RETI to 0xff600000 and
10 * writes bit 11 of SICB_SYSCR when bit 5 of SICA_SYSCR is 0. This causes Core
11 * B to stall when Supplemental Interrupt 0 is set, and will reset PC to
12 * 0xff600000 when COREB_SRAM_INIT is cleared.
15 #include <linux/device.h>
17 #include <linux/kernel.h>
18 #include <linux/miscdevice.h>
19 #include <linux/module.h>
21 #define CMD_COREB_START 2
22 #define CMD_COREB_STOP 3
23 #define CMD_COREB_RESET 4
26 coreb_ioctl(struct inode
*inode
, struct file
*file
, unsigned int cmd
, unsigned long arg
)
32 bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() & ~0x0020);
35 bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() | 0x0020);
36 bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | 0x0080);
39 bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | 0x0080);
51 static const struct file_operations coreb_fops
= {
56 static struct miscdevice coreb_dev
= {
57 .minor
= MISC_DYNAMIC_MINOR
,
62 static int __init
bf561_coreb_init(void)
64 return misc_register(&coreb_dev
);
66 module_init(bf561_coreb_init
);
68 static void __exit
bf561_coreb_exit(void)
70 misc_deregister(&coreb_dev
);
72 module_exit(bf561_coreb_exit
);
74 MODULE_AUTHOR("Bas Vermeulen <bvermeul@blackstar.xs4all.nl>");
75 MODULE_DESCRIPTION("BF561 Core B Support");