First Support on Ginger and OMAP TI
[linux-ginger.git] / arch / mips / include / asm / irqflags.h
blob701ec0ba8fa9cdd596369b9de3825b284bae1ec9
1 /*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
6 * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003 by Ralf Baechle
7 * Copyright (C) 1996 by Paul M. Antoine
8 * Copyright (C) 1999 Silicon Graphics
9 * Copyright (C) 2000 MIPS Technologies, Inc.
11 #ifndef _ASM_IRQFLAGS_H
12 #define _ASM_IRQFLAGS_H
14 #ifndef __ASSEMBLY__
16 #include <linux/compiler.h>
17 #include <asm/hazards.h>
19 __asm__(
20 " .macro raw_local_irq_enable \n"
21 " .set push \n"
22 " .set reorder \n"
23 " .set noat \n"
24 #ifdef CONFIG_MIPS_MT_SMTC
25 " mfc0 $1, $2, 1 # SMTC - clear TCStatus.IXMT \n"
26 " ori $1, 0x400 \n"
27 " xori $1, 0x400 \n"
28 " mtc0 $1, $2, 1 \n"
29 #elif defined(CONFIG_CPU_MIPSR2)
30 " ei \n"
31 #else
32 " mfc0 $1,$12 \n"
33 " ori $1,0x1f \n"
34 " xori $1,0x1e \n"
35 " mtc0 $1,$12 \n"
36 #endif
37 " irq_enable_hazard \n"
38 " .set pop \n"
39 " .endm");
41 extern void smtc_ipi_replay(void);
43 static inline void raw_local_irq_enable(void)
45 #ifdef CONFIG_MIPS_MT_SMTC
47 * SMTC kernel needs to do a software replay of queued
48 * IPIs, at the cost of call overhead on each local_irq_enable()
50 smtc_ipi_replay();
51 #endif
52 __asm__ __volatile__(
53 "raw_local_irq_enable"
54 : /* no outputs */
55 : /* no inputs */
56 : "memory");
61 * For cli() we have to insert nops to make sure that the new value
62 * has actually arrived in the status register before the end of this
63 * macro.
64 * R4000/R4400 need three nops, the R4600 two nops and the R10000 needs
65 * no nops at all.
68 * For TX49, operating only IE bit is not enough.
70 * If mfc0 $12 follows store and the mfc0 is last instruction of a
71 * page and fetching the next instruction causes TLB miss, the result
72 * of the mfc0 might wrongly contain EXL bit.
74 * ERT-TX49H2-027, ERT-TX49H3-012, ERT-TX49HL3-006, ERT-TX49H4-008
76 * Workaround: mask EXL bit of the result or place a nop before mfc0.
78 __asm__(
79 " .macro raw_local_irq_disable\n"
80 " .set push \n"
81 " .set noat \n"
82 #ifdef CONFIG_MIPS_MT_SMTC
83 " mfc0 $1, $2, 1 \n"
84 " ori $1, 0x400 \n"
85 " .set noreorder \n"
86 " mtc0 $1, $2, 1 \n"
87 #elif defined(CONFIG_CPU_MIPSR2)
88 " di \n"
89 #else
90 " mfc0 $1,$12 \n"
91 " ori $1,0x1f \n"
92 " xori $1,0x1f \n"
93 " .set noreorder \n"
94 " mtc0 $1,$12 \n"
95 #endif
96 " irq_disable_hazard \n"
97 " .set pop \n"
98 " .endm \n");
100 static inline void raw_local_irq_disable(void)
102 __asm__ __volatile__(
103 "raw_local_irq_disable"
104 : /* no outputs */
105 : /* no inputs */
106 : "memory");
109 __asm__(
110 " .macro raw_local_save_flags flags \n"
111 " .set push \n"
112 " .set reorder \n"
113 #ifdef CONFIG_MIPS_MT_SMTC
114 " mfc0 \\flags, $2, 1 \n"
115 #else
116 " mfc0 \\flags, $12 \n"
117 #endif
118 " .set pop \n"
119 " .endm \n");
121 #define raw_local_save_flags(x) \
122 __asm__ __volatile__( \
123 "raw_local_save_flags %0" \
124 : "=r" (x))
126 __asm__(
127 " .macro raw_local_irq_save result \n"
128 " .set push \n"
129 " .set reorder \n"
130 " .set noat \n"
131 #ifdef CONFIG_MIPS_MT_SMTC
132 " mfc0 \\result, $2, 1 \n"
133 " ori $1, \\result, 0x400 \n"
134 " .set noreorder \n"
135 " mtc0 $1, $2, 1 \n"
136 " andi \\result, \\result, 0x400 \n"
137 #elif defined(CONFIG_CPU_MIPSR2)
138 " di \\result \n"
139 " andi \\result, 1 \n"
140 #else
141 " mfc0 \\result, $12 \n"
142 " ori $1, \\result, 0x1f \n"
143 " xori $1, 0x1f \n"
144 " .set noreorder \n"
145 " mtc0 $1, $12 \n"
146 #endif
147 " irq_disable_hazard \n"
148 " .set pop \n"
149 " .endm \n");
151 #define raw_local_irq_save(x) \
152 __asm__ __volatile__( \
153 "raw_local_irq_save\t%0" \
154 : "=r" (x) \
155 : /* no inputs */ \
156 : "memory")
158 __asm__(
159 " .macro raw_local_irq_restore flags \n"
160 " .set push \n"
161 " .set noreorder \n"
162 " .set noat \n"
163 #ifdef CONFIG_MIPS_MT_SMTC
164 "mfc0 $1, $2, 1 \n"
165 "andi \\flags, 0x400 \n"
166 "ori $1, 0x400 \n"
167 "xori $1, 0x400 \n"
168 "or \\flags, $1 \n"
169 "mtc0 \\flags, $2, 1 \n"
170 #elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
172 * Slow, but doesn't suffer from a relativly unlikely race
173 * condition we're having since days 1.
175 " beqz \\flags, 1f \n"
176 " di \n"
177 " ei \n"
178 "1: \n"
179 #elif defined(CONFIG_CPU_MIPSR2)
181 * Fast, dangerous. Life is fun, life is good.
183 " mfc0 $1, $12 \n"
184 " ins $1, \\flags, 0, 1 \n"
185 " mtc0 $1, $12 \n"
186 #else
187 " mfc0 $1, $12 \n"
188 " andi \\flags, 1 \n"
189 " ori $1, 0x1f \n"
190 " xori $1, 0x1f \n"
191 " or \\flags, $1 \n"
192 " mtc0 \\flags, $12 \n"
193 #endif
194 " irq_disable_hazard \n"
195 " .set pop \n"
196 " .endm \n");
199 static inline void raw_local_irq_restore(unsigned long flags)
201 unsigned long __tmp1;
203 #ifdef CONFIG_MIPS_MT_SMTC
205 * SMTC kernel needs to do a software replay of queued
206 * IPIs, at the cost of branch and call overhead on each
207 * local_irq_restore()
209 if (unlikely(!(flags & 0x0400)))
210 smtc_ipi_replay();
211 #endif
213 __asm__ __volatile__(
214 "raw_local_irq_restore\t%0"
215 : "=r" (__tmp1)
216 : "0" (flags)
217 : "memory");
220 static inline void __raw_local_irq_restore(unsigned long flags)
222 unsigned long __tmp1;
224 __asm__ __volatile__(
225 "raw_local_irq_restore\t%0"
226 : "=r" (__tmp1)
227 : "0" (flags)
228 : "memory");
231 static inline int raw_irqs_disabled_flags(unsigned long flags)
233 #ifdef CONFIG_MIPS_MT_SMTC
235 * SMTC model uses TCStatus.IXMT to disable interrupts for a thread/CPU
237 return flags & 0x400;
238 #else
239 return !(flags & 1);
240 #endif
243 #endif
246 * Do the CPU's IRQ-state tracing from assembly code.
248 #ifdef CONFIG_TRACE_IRQFLAGS
249 /* Reload some registers clobbered by trace_hardirqs_on */
250 #ifdef CONFIG_64BIT
251 # define TRACE_IRQS_RELOAD_REGS \
252 LONG_L $11, PT_R11(sp); \
253 LONG_L $10, PT_R10(sp); \
254 LONG_L $9, PT_R9(sp); \
255 LONG_L $8, PT_R8(sp); \
256 LONG_L $7, PT_R7(sp); \
257 LONG_L $6, PT_R6(sp); \
258 LONG_L $5, PT_R5(sp); \
259 LONG_L $4, PT_R4(sp); \
260 LONG_L $2, PT_R2(sp)
261 #else
262 # define TRACE_IRQS_RELOAD_REGS \
263 LONG_L $7, PT_R7(sp); \
264 LONG_L $6, PT_R6(sp); \
265 LONG_L $5, PT_R5(sp); \
266 LONG_L $4, PT_R4(sp); \
267 LONG_L $2, PT_R2(sp)
268 #endif
269 # define TRACE_IRQS_ON \
270 CLI; /* make sure trace_hardirqs_on() is called in kernel level */ \
271 jal trace_hardirqs_on
272 # define TRACE_IRQS_ON_RELOAD \
273 TRACE_IRQS_ON; \
274 TRACE_IRQS_RELOAD_REGS
275 # define TRACE_IRQS_OFF \
276 jal trace_hardirqs_off
277 #else
278 # define TRACE_IRQS_ON
279 # define TRACE_IRQS_ON_RELOAD
280 # define TRACE_IRQS_OFF
281 #endif
283 #endif /* _ASM_IRQFLAGS_H */