First Support on Ginger and OMAP TI
[linux-ginger.git] / arch / mips / kernel / vpe.c
blob03092ab2a296fcb89472f89ce45c44275bf922d7
1 /*
2 * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved.
4 * This program is free software; you can distribute it and/or modify it
5 * under the terms of the GNU General Public License (Version 2) as
6 * published by the Free Software Foundation.
8 * This program is distributed in the hope it will be useful, but WITHOUT
9 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
10 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
11 * for more details.
13 * You should have received a copy of the GNU General Public License along
14 * with this program; if not, write to the Free Software Foundation, Inc.,
15 * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
19 * VPE support module
21 * Provides support for loading a MIPS SP program on VPE1.
22 * The SP enviroment is rather simple, no tlb's. It needs to be relocatable
23 * (or partially linked). You should initialise your stack in the startup
24 * code. This loader looks for the symbol __start and sets up
25 * execution to resume from there. The MIPS SDE kit contains suitable examples.
27 * To load and run, simply cat a SP 'program file' to /dev/vpe1.
28 * i.e cat spapp >/dev/vpe1.
30 #include <linux/kernel.h>
31 #include <linux/device.h>
32 #include <linux/module.h>
33 #include <linux/fs.h>
34 #include <linux/init.h>
35 #include <asm/uaccess.h>
36 #include <linux/slab.h>
37 #include <linux/list.h>
38 #include <linux/vmalloc.h>
39 #include <linux/elf.h>
40 #include <linux/seq_file.h>
41 #include <linux/smp_lock.h>
42 #include <linux/syscalls.h>
43 #include <linux/moduleloader.h>
44 #include <linux/interrupt.h>
45 #include <linux/poll.h>
46 #include <linux/bootmem.h>
47 #include <asm/mipsregs.h>
48 #include <asm/mipsmtregs.h>
49 #include <asm/cacheflush.h>
50 #include <asm/atomic.h>
51 #include <asm/cpu.h>
52 #include <asm/mips_mt.h>
53 #include <asm/processor.h>
54 #include <asm/system.h>
55 #include <asm/vpe.h>
56 #include <asm/kspd.h>
58 typedef void *vpe_handle;
60 #ifndef ARCH_SHF_SMALL
61 #define ARCH_SHF_SMALL 0
62 #endif
64 /* If this is set, the section belongs in the init part of the module */
65 #define INIT_OFFSET_MASK (1UL << (BITS_PER_LONG-1))
68 * The number of TCs and VPEs physically available on the core
70 static int hw_tcs, hw_vpes;
71 static char module_name[] = "vpe";
72 static int major;
73 static const int minor = 1; /* fixed for now */
75 #ifdef CONFIG_MIPS_APSP_KSPD
76 static struct kspd_notifications kspd_events;
77 static int kspd_events_reqd;
78 #endif
80 /* grab the likely amount of memory we will need. */
81 #ifdef CONFIG_MIPS_VPE_LOADER_TOM
82 #define P_SIZE (2 * 1024 * 1024)
83 #else
84 /* add an overhead to the max kmalloc size for non-striped symbols/etc */
85 #define P_SIZE (256 * 1024)
86 #endif
88 extern unsigned long physical_memsize;
90 #define MAX_VPES 16
91 #define VPE_PATH_MAX 256
93 enum vpe_state {
94 VPE_STATE_UNUSED = 0,
95 VPE_STATE_INUSE,
96 VPE_STATE_RUNNING
99 enum tc_state {
100 TC_STATE_UNUSED = 0,
101 TC_STATE_INUSE,
102 TC_STATE_RUNNING,
103 TC_STATE_DYNAMIC
106 struct vpe {
107 enum vpe_state state;
109 /* (device) minor associated with this vpe */
110 int minor;
112 /* elfloader stuff */
113 void *load_addr;
114 unsigned long len;
115 char *pbuffer;
116 unsigned long plen;
117 unsigned int uid, gid;
118 char cwd[VPE_PATH_MAX];
120 unsigned long __start;
122 /* tc's associated with this vpe */
123 struct list_head tc;
125 /* The list of vpe's */
126 struct list_head list;
128 /* shared symbol address */
129 void *shared_ptr;
131 /* the list of who wants to know when something major happens */
132 struct list_head notify;
134 unsigned int ntcs;
137 struct tc {
138 enum tc_state state;
139 int index;
141 struct vpe *pvpe; /* parent VPE */
142 struct list_head tc; /* The list of TC's with this VPE */
143 struct list_head list; /* The global list of tc's */
146 struct {
147 spinlock_t vpe_list_lock;
148 struct list_head vpe_list; /* Virtual processing elements */
149 spinlock_t tc_list_lock;
150 struct list_head tc_list; /* Thread contexts */
151 } vpecontrol = {
152 .vpe_list_lock = SPIN_LOCK_UNLOCKED,
153 .vpe_list = LIST_HEAD_INIT(vpecontrol.vpe_list),
154 .tc_list_lock = SPIN_LOCK_UNLOCKED,
155 .tc_list = LIST_HEAD_INIT(vpecontrol.tc_list)
158 static void release_progmem(void *ptr);
160 /* get the vpe associated with this minor */
161 static struct vpe *get_vpe(int minor)
163 struct vpe *res, *v;
165 if (!cpu_has_mipsmt)
166 return NULL;
168 res = NULL;
169 spin_lock(&vpecontrol.vpe_list_lock);
170 list_for_each_entry(v, &vpecontrol.vpe_list, list) {
171 if (v->minor == minor) {
172 res = v;
173 break;
176 spin_unlock(&vpecontrol.vpe_list_lock);
178 return res;
181 /* get the vpe associated with this minor */
182 static struct tc *get_tc(int index)
184 struct tc *res, *t;
186 res = NULL;
187 spin_lock(&vpecontrol.tc_list_lock);
188 list_for_each_entry(t, &vpecontrol.tc_list, list) {
189 if (t->index == index) {
190 res = t;
191 break;
194 spin_unlock(&vpecontrol.tc_list_lock);
196 return NULL;
199 /* allocate a vpe and associate it with this minor (or index) */
200 static struct vpe *alloc_vpe(int minor)
202 struct vpe *v;
204 if ((v = kzalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL)
205 return NULL;
207 INIT_LIST_HEAD(&v->tc);
208 spin_lock(&vpecontrol.vpe_list_lock);
209 list_add_tail(&v->list, &vpecontrol.vpe_list);
210 spin_unlock(&vpecontrol.vpe_list_lock);
212 INIT_LIST_HEAD(&v->notify);
213 v->minor = minor;
215 return v;
218 /* allocate a tc. At startup only tc0 is running, all other can be halted. */
219 static struct tc *alloc_tc(int index)
221 struct tc *tc;
223 if ((tc = kzalloc(sizeof(struct tc), GFP_KERNEL)) == NULL)
224 goto out;
226 INIT_LIST_HEAD(&tc->tc);
227 tc->index = index;
229 spin_lock(&vpecontrol.tc_list_lock);
230 list_add_tail(&tc->list, &vpecontrol.tc_list);
231 spin_unlock(&vpecontrol.tc_list_lock);
233 out:
234 return tc;
237 /* clean up and free everything */
238 static void release_vpe(struct vpe *v)
240 list_del(&v->list);
241 if (v->load_addr)
242 release_progmem(v);
243 kfree(v);
246 static void __maybe_unused dump_mtregs(void)
248 unsigned long val;
250 val = read_c0_config3();
251 printk("config3 0x%lx MT %ld\n", val,
252 (val & CONFIG3_MT) >> CONFIG3_MT_SHIFT);
254 val = read_c0_mvpcontrol();
255 printk("MVPControl 0x%lx, STLB %ld VPC %ld EVP %ld\n", val,
256 (val & MVPCONTROL_STLB) >> MVPCONTROL_STLB_SHIFT,
257 (val & MVPCONTROL_VPC) >> MVPCONTROL_VPC_SHIFT,
258 (val & MVPCONTROL_EVP));
260 val = read_c0_mvpconf0();
261 printk("mvpconf0 0x%lx, PVPE %ld PTC %ld M %ld\n", val,
262 (val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT,
263 val & MVPCONF0_PTC, (val & MVPCONF0_M) >> MVPCONF0_M_SHIFT);
266 /* Find some VPE program space */
267 static void *alloc_progmem(unsigned long len)
269 void *addr;
271 #ifdef CONFIG_MIPS_VPE_LOADER_TOM
273 * This means you must tell Linux to use less memory than you
274 * physically have, for example by passing a mem= boot argument.
276 addr = pfn_to_kaddr(max_low_pfn);
277 memset(addr, 0, len);
278 #else
279 /* simple grab some mem for now */
280 addr = kzalloc(len, GFP_KERNEL);
281 #endif
283 return addr;
286 static void release_progmem(void *ptr)
288 #ifndef CONFIG_MIPS_VPE_LOADER_TOM
289 kfree(ptr);
290 #endif
293 /* Update size with this section: return offset. */
294 static long get_offset(unsigned long *size, Elf_Shdr * sechdr)
296 long ret;
298 ret = ALIGN(*size, sechdr->sh_addralign ? : 1);
299 *size = ret + sechdr->sh_size;
300 return ret;
303 /* Lay out the SHF_ALLOC sections in a way not dissimilar to how ld
304 might -- code, read-only data, read-write data, small data. Tally
305 sizes, and place the offsets into sh_entsize fields: high bit means it
306 belongs in init. */
307 static void layout_sections(struct module *mod, const Elf_Ehdr * hdr,
308 Elf_Shdr * sechdrs, const char *secstrings)
310 static unsigned long const masks[][2] = {
311 /* NOTE: all executable code must be the first section
312 * in this array; otherwise modify the text_size
313 * finder in the two loops below */
314 {SHF_EXECINSTR | SHF_ALLOC, ARCH_SHF_SMALL},
315 {SHF_ALLOC, SHF_WRITE | ARCH_SHF_SMALL},
316 {SHF_WRITE | SHF_ALLOC, ARCH_SHF_SMALL},
317 {ARCH_SHF_SMALL | SHF_ALLOC, 0}
319 unsigned int m, i;
321 for (i = 0; i < hdr->e_shnum; i++)
322 sechdrs[i].sh_entsize = ~0UL;
324 for (m = 0; m < ARRAY_SIZE(masks); ++m) {
325 for (i = 0; i < hdr->e_shnum; ++i) {
326 Elf_Shdr *s = &sechdrs[i];
328 // || strncmp(secstrings + s->sh_name, ".init", 5) == 0)
329 if ((s->sh_flags & masks[m][0]) != masks[m][0]
330 || (s->sh_flags & masks[m][1])
331 || s->sh_entsize != ~0UL)
332 continue;
333 s->sh_entsize =
334 get_offset((unsigned long *)&mod->core_size, s);
337 if (m == 0)
338 mod->core_text_size = mod->core_size;
344 /* from module-elf32.c, but subverted a little */
346 struct mips_hi16 {
347 struct mips_hi16 *next;
348 Elf32_Addr *addr;
349 Elf32_Addr value;
352 static struct mips_hi16 *mips_hi16_list;
353 static unsigned int gp_offs, gp_addr;
355 static int apply_r_mips_none(struct module *me, uint32_t *location,
356 Elf32_Addr v)
358 return 0;
361 static int apply_r_mips_gprel16(struct module *me, uint32_t *location,
362 Elf32_Addr v)
364 int rel;
366 if( !(*location & 0xffff) ) {
367 rel = (int)v - gp_addr;
369 else {
370 /* .sbss + gp(relative) + offset */
371 /* kludge! */
372 rel = (int)(short)((int)v + gp_offs +
373 (int)(short)(*location & 0xffff) - gp_addr);
376 if( (rel > 32768) || (rel < -32768) ) {
377 printk(KERN_DEBUG "VPE loader: apply_r_mips_gprel16: "
378 "relative address 0x%x out of range of gp register\n",
379 rel);
380 return -ENOEXEC;
383 *location = (*location & 0xffff0000) | (rel & 0xffff);
385 return 0;
388 static int apply_r_mips_pc16(struct module *me, uint32_t *location,
389 Elf32_Addr v)
391 int rel;
392 rel = (((unsigned int)v - (unsigned int)location));
393 rel >>= 2; // because the offset is in _instructions_ not bytes.
394 rel -= 1; // and one instruction less due to the branch delay slot.
396 if( (rel > 32768) || (rel < -32768) ) {
397 printk(KERN_DEBUG "VPE loader: "
398 "apply_r_mips_pc16: relative address out of range 0x%x\n", rel);
399 return -ENOEXEC;
402 *location = (*location & 0xffff0000) | (rel & 0xffff);
404 return 0;
407 static int apply_r_mips_32(struct module *me, uint32_t *location,
408 Elf32_Addr v)
410 *location += v;
412 return 0;
415 static int apply_r_mips_26(struct module *me, uint32_t *location,
416 Elf32_Addr v)
418 if (v % 4) {
419 printk(KERN_DEBUG "VPE loader: apply_r_mips_26 "
420 " unaligned relocation\n");
421 return -ENOEXEC;
425 * Not desperately convinced this is a good check of an overflow condition
426 * anyway. But it gets in the way of handling undefined weak symbols which
427 * we want to set to zero.
428 * if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
429 * printk(KERN_ERR
430 * "module %s: relocation overflow\n",
431 * me->name);
432 * return -ENOEXEC;
436 *location = (*location & ~0x03ffffff) |
437 ((*location + (v >> 2)) & 0x03ffffff);
438 return 0;
441 static int apply_r_mips_hi16(struct module *me, uint32_t *location,
442 Elf32_Addr v)
444 struct mips_hi16 *n;
447 * We cannot relocate this one now because we don't know the value of
448 * the carry we need to add. Save the information, and let LO16 do the
449 * actual relocation.
451 n = kmalloc(sizeof *n, GFP_KERNEL);
452 if (!n)
453 return -ENOMEM;
455 n->addr = location;
456 n->value = v;
457 n->next = mips_hi16_list;
458 mips_hi16_list = n;
460 return 0;
463 static int apply_r_mips_lo16(struct module *me, uint32_t *location,
464 Elf32_Addr v)
466 unsigned long insnlo = *location;
467 Elf32_Addr val, vallo;
468 struct mips_hi16 *l, *next;
470 /* Sign extend the addend we extract from the lo insn. */
471 vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
473 if (mips_hi16_list != NULL) {
475 l = mips_hi16_list;
476 while (l != NULL) {
477 unsigned long insn;
480 * The value for the HI16 had best be the same.
482 if (v != l->value) {
483 printk(KERN_DEBUG "VPE loader: "
484 "apply_r_mips_lo16/hi16: \t"
485 "inconsistent value information\n");
486 goto out_free;
490 * Do the HI16 relocation. Note that we actually don't
491 * need to know anything about the LO16 itself, except
492 * where to find the low 16 bits of the addend needed
493 * by the LO16.
495 insn = *l->addr;
496 val = ((insn & 0xffff) << 16) + vallo;
497 val += v;
500 * Account for the sign extension that will happen in
501 * the low bits.
503 val = ((val >> 16) + ((val & 0x8000) != 0)) & 0xffff;
505 insn = (insn & ~0xffff) | val;
506 *l->addr = insn;
508 next = l->next;
509 kfree(l);
510 l = next;
513 mips_hi16_list = NULL;
517 * Ok, we're done with the HI16 relocs. Now deal with the LO16.
519 val = v + vallo;
520 insnlo = (insnlo & ~0xffff) | (val & 0xffff);
521 *location = insnlo;
523 return 0;
525 out_free:
526 while (l != NULL) {
527 next = l->next;
528 kfree(l);
529 l = next;
531 mips_hi16_list = NULL;
533 return -ENOEXEC;
536 static int (*reloc_handlers[]) (struct module *me, uint32_t *location,
537 Elf32_Addr v) = {
538 [R_MIPS_NONE] = apply_r_mips_none,
539 [R_MIPS_32] = apply_r_mips_32,
540 [R_MIPS_26] = apply_r_mips_26,
541 [R_MIPS_HI16] = apply_r_mips_hi16,
542 [R_MIPS_LO16] = apply_r_mips_lo16,
543 [R_MIPS_GPREL16] = apply_r_mips_gprel16,
544 [R_MIPS_PC16] = apply_r_mips_pc16
547 static char *rstrs[] = {
548 [R_MIPS_NONE] = "MIPS_NONE",
549 [R_MIPS_32] = "MIPS_32",
550 [R_MIPS_26] = "MIPS_26",
551 [R_MIPS_HI16] = "MIPS_HI16",
552 [R_MIPS_LO16] = "MIPS_LO16",
553 [R_MIPS_GPREL16] = "MIPS_GPREL16",
554 [R_MIPS_PC16] = "MIPS_PC16"
557 static int apply_relocations(Elf32_Shdr *sechdrs,
558 const char *strtab,
559 unsigned int symindex,
560 unsigned int relsec,
561 struct module *me)
563 Elf32_Rel *rel = (void *) sechdrs[relsec].sh_addr;
564 Elf32_Sym *sym;
565 uint32_t *location;
566 unsigned int i;
567 Elf32_Addr v;
568 int res;
570 for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
571 Elf32_Word r_info = rel[i].r_info;
573 /* This is where to make the change */
574 location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
575 + rel[i].r_offset;
576 /* This is the symbol it is referring to */
577 sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
578 + ELF32_R_SYM(r_info);
580 if (!sym->st_value) {
581 printk(KERN_DEBUG "%s: undefined weak symbol %s\n",
582 me->name, strtab + sym->st_name);
583 /* just print the warning, dont barf */
586 v = sym->st_value;
588 res = reloc_handlers[ELF32_R_TYPE(r_info)](me, location, v);
589 if( res ) {
590 char *r = rstrs[ELF32_R_TYPE(r_info)];
591 printk(KERN_WARNING "VPE loader: .text+0x%x "
592 "relocation type %s for symbol \"%s\" failed\n",
593 rel[i].r_offset, r ? r : "UNKNOWN",
594 strtab + sym->st_name);
595 return res;
599 return 0;
602 static inline void save_gp_address(unsigned int secbase, unsigned int rel)
604 gp_addr = secbase + rel;
605 gp_offs = gp_addr - (secbase & 0xffff0000);
607 /* end module-elf32.c */
611 /* Change all symbols so that sh_value encodes the pointer directly. */
612 static void simplify_symbols(Elf_Shdr * sechdrs,
613 unsigned int symindex,
614 const char *strtab,
615 const char *secstrings,
616 unsigned int nsecs, struct module *mod)
618 Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
619 unsigned long secbase, bssbase = 0;
620 unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
621 int size;
623 /* find the .bss section for COMMON symbols */
624 for (i = 0; i < nsecs; i++) {
625 if (strncmp(secstrings + sechdrs[i].sh_name, ".bss", 4) == 0) {
626 bssbase = sechdrs[i].sh_addr;
627 break;
631 for (i = 1; i < n; i++) {
632 switch (sym[i].st_shndx) {
633 case SHN_COMMON:
634 /* Allocate space for the symbol in the .bss section.
635 st_value is currently size.
636 We want it to have the address of the symbol. */
638 size = sym[i].st_value;
639 sym[i].st_value = bssbase;
641 bssbase += size;
642 break;
644 case SHN_ABS:
645 /* Don't need to do anything */
646 break;
648 case SHN_UNDEF:
649 /* ret = -ENOENT; */
650 break;
652 case SHN_MIPS_SCOMMON:
653 printk(KERN_DEBUG "simplify_symbols: ignoring SHN_MIPS_SCOMMON "
654 "symbol <%s> st_shndx %d\n", strtab + sym[i].st_name,
655 sym[i].st_shndx);
656 // .sbss section
657 break;
659 default:
660 secbase = sechdrs[sym[i].st_shndx].sh_addr;
662 if (strncmp(strtab + sym[i].st_name, "_gp", 3) == 0) {
663 save_gp_address(secbase, sym[i].st_value);
666 sym[i].st_value += secbase;
667 break;
672 #ifdef DEBUG_ELFLOADER
673 static void dump_elfsymbols(Elf_Shdr * sechdrs, unsigned int symindex,
674 const char *strtab, struct module *mod)
676 Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
677 unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
679 printk(KERN_DEBUG "dump_elfsymbols: n %d\n", n);
680 for (i = 1; i < n; i++) {
681 printk(KERN_DEBUG " i %d name <%s> 0x%x\n", i,
682 strtab + sym[i].st_name, sym[i].st_value);
685 #endif
687 /* We are prepared so configure and start the VPE... */
688 static int vpe_run(struct vpe * v)
690 unsigned long flags, val, dmt_flag;
691 struct vpe_notifications *n;
692 unsigned int vpeflags;
693 struct tc *t;
695 /* check we are the Master VPE */
696 local_irq_save(flags);
697 val = read_c0_vpeconf0();
698 if (!(val & VPECONF0_MVP)) {
699 printk(KERN_WARNING
700 "VPE loader: only Master VPE's are allowed to configure MT\n");
701 local_irq_restore(flags);
703 return -1;
706 dmt_flag = dmt();
707 vpeflags = dvpe();
709 if (!list_empty(&v->tc)) {
710 if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) {
711 evpe(vpeflags);
712 emt(dmt_flag);
713 local_irq_restore(flags);
715 printk(KERN_WARNING
716 "VPE loader: TC %d is already in use.\n",
717 t->index);
718 return -ENOEXEC;
720 } else {
721 evpe(vpeflags);
722 emt(dmt_flag);
723 local_irq_restore(flags);
725 printk(KERN_WARNING
726 "VPE loader: No TC's associated with VPE %d\n",
727 v->minor);
729 return -ENOEXEC;
732 /* Put MVPE's into 'configuration state' */
733 set_c0_mvpcontrol(MVPCONTROL_VPC);
735 settc(t->index);
737 /* should check it is halted, and not activated */
738 if ((read_tc_c0_tcstatus() & TCSTATUS_A) || !(read_tc_c0_tchalt() & TCHALT_H)) {
739 evpe(vpeflags);
740 emt(dmt_flag);
741 local_irq_restore(flags);
743 printk(KERN_WARNING "VPE loader: TC %d is already active!\n",
744 t->index);
746 return -ENOEXEC;
749 /* Write the address we want it to start running from in the TCPC register. */
750 write_tc_c0_tcrestart((unsigned long)v->__start);
751 write_tc_c0_tccontext((unsigned long)0);
754 * Mark the TC as activated, not interrupt exempt and not dynamically
755 * allocatable
757 val = read_tc_c0_tcstatus();
758 val = (val & ~(TCSTATUS_DA | TCSTATUS_IXMT)) | TCSTATUS_A;
759 write_tc_c0_tcstatus(val);
761 write_tc_c0_tchalt(read_tc_c0_tchalt() & ~TCHALT_H);
764 * The sde-kit passes 'memsize' to __start in $a3, so set something
765 * here... Or set $a3 to zero and define DFLT_STACK_SIZE and
766 * DFLT_HEAP_SIZE when you compile your program
768 mttgpr(6, v->ntcs);
769 mttgpr(7, physical_memsize);
771 /* set up VPE1 */
773 * bind the TC to VPE 1 as late as possible so we only have the final
774 * VPE registers to set up, and so an EJTAG probe can trigger on it
776 write_tc_c0_tcbind((read_tc_c0_tcbind() & ~TCBIND_CURVPE) | 1);
778 write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~(VPECONF0_VPA));
780 back_to_back_c0_hazard();
782 /* Set up the XTC bit in vpeconf0 to point at our tc */
783 write_vpe_c0_vpeconf0( (read_vpe_c0_vpeconf0() & ~(VPECONF0_XTC))
784 | (t->index << VPECONF0_XTC_SHIFT));
786 back_to_back_c0_hazard();
788 /* enable this VPE */
789 write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA);
791 /* clear out any left overs from a previous program */
792 write_vpe_c0_status(0);
793 write_vpe_c0_cause(0);
795 /* take system out of configuration state */
796 clear_c0_mvpcontrol(MVPCONTROL_VPC);
799 * SMTC/SMVP kernels manage VPE enable independently,
800 * but uniprocessor kernels need to turn it on, even
801 * if that wasn't the pre-dvpe() state.
803 #ifdef CONFIG_SMP
804 evpe(vpeflags);
805 #else
806 evpe(EVPE_ENABLE);
807 #endif
808 emt(dmt_flag);
809 local_irq_restore(flags);
811 list_for_each_entry(n, &v->notify, list)
812 n->start(minor);
814 return 0;
817 static int find_vpe_symbols(struct vpe * v, Elf_Shdr * sechdrs,
818 unsigned int symindex, const char *strtab,
819 struct module *mod)
821 Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
822 unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
824 for (i = 1; i < n; i++) {
825 if (strcmp(strtab + sym[i].st_name, "__start") == 0) {
826 v->__start = sym[i].st_value;
829 if (strcmp(strtab + sym[i].st_name, "vpe_shared") == 0) {
830 v->shared_ptr = (void *)sym[i].st_value;
834 if ( (v->__start == 0) || (v->shared_ptr == NULL))
835 return -1;
837 return 0;
841 * Allocates a VPE with some program code space(the load address), copies the
842 * contents of the program (p)buffer performing relocatations/etc, free's it
843 * when finished.
845 static int vpe_elfload(struct vpe * v)
847 Elf_Ehdr *hdr;
848 Elf_Shdr *sechdrs;
849 long err = 0;
850 char *secstrings, *strtab = NULL;
851 unsigned int len, i, symindex = 0, strindex = 0, relocate = 0;
852 struct module mod; // so we can re-use the relocations code
854 memset(&mod, 0, sizeof(struct module));
855 strcpy(mod.name, "VPE loader");
857 hdr = (Elf_Ehdr *) v->pbuffer;
858 len = v->plen;
860 /* Sanity checks against insmoding binaries or wrong arch,
861 weird elf version */
862 if (memcmp(hdr->e_ident, ELFMAG, SELFMAG) != 0
863 || (hdr->e_type != ET_REL && hdr->e_type != ET_EXEC)
864 || !elf_check_arch(hdr)
865 || hdr->e_shentsize != sizeof(*sechdrs)) {
866 printk(KERN_WARNING
867 "VPE loader: program wrong arch or weird elf version\n");
869 return -ENOEXEC;
872 if (hdr->e_type == ET_REL)
873 relocate = 1;
875 if (len < hdr->e_shoff + hdr->e_shnum * sizeof(Elf_Shdr)) {
876 printk(KERN_ERR "VPE loader: program length %u truncated\n",
877 len);
879 return -ENOEXEC;
882 /* Convenience variables */
883 sechdrs = (void *)hdr + hdr->e_shoff;
884 secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
885 sechdrs[0].sh_addr = 0;
887 /* And these should exist, but gcc whinges if we don't init them */
888 symindex = strindex = 0;
890 if (relocate) {
891 for (i = 1; i < hdr->e_shnum; i++) {
892 if (sechdrs[i].sh_type != SHT_NOBITS
893 && len < sechdrs[i].sh_offset + sechdrs[i].sh_size) {
894 printk(KERN_ERR "VPE program length %u truncated\n",
895 len);
896 return -ENOEXEC;
899 /* Mark all sections sh_addr with their address in the
900 temporary image. */
901 sechdrs[i].sh_addr = (size_t) hdr + sechdrs[i].sh_offset;
903 /* Internal symbols and strings. */
904 if (sechdrs[i].sh_type == SHT_SYMTAB) {
905 symindex = i;
906 strindex = sechdrs[i].sh_link;
907 strtab = (char *)hdr + sechdrs[strindex].sh_offset;
910 layout_sections(&mod, hdr, sechdrs, secstrings);
913 v->load_addr = alloc_progmem(mod.core_size);
914 if (!v->load_addr)
915 return -ENOMEM;
917 pr_info("VPE loader: loading to %p\n", v->load_addr);
919 if (relocate) {
920 for (i = 0; i < hdr->e_shnum; i++) {
921 void *dest;
923 if (!(sechdrs[i].sh_flags & SHF_ALLOC))
924 continue;
926 dest = v->load_addr + sechdrs[i].sh_entsize;
928 if (sechdrs[i].sh_type != SHT_NOBITS)
929 memcpy(dest, (void *)sechdrs[i].sh_addr,
930 sechdrs[i].sh_size);
931 /* Update sh_addr to point to copy in image. */
932 sechdrs[i].sh_addr = (unsigned long)dest;
934 printk(KERN_DEBUG " section sh_name %s sh_addr 0x%x\n",
935 secstrings + sechdrs[i].sh_name, sechdrs[i].sh_addr);
938 /* Fix up syms, so that st_value is a pointer to location. */
939 simplify_symbols(sechdrs, symindex, strtab, secstrings,
940 hdr->e_shnum, &mod);
942 /* Now do relocations. */
943 for (i = 1; i < hdr->e_shnum; i++) {
944 const char *strtab = (char *)sechdrs[strindex].sh_addr;
945 unsigned int info = sechdrs[i].sh_info;
947 /* Not a valid relocation section? */
948 if (info >= hdr->e_shnum)
949 continue;
951 /* Don't bother with non-allocated sections */
952 if (!(sechdrs[info].sh_flags & SHF_ALLOC))
953 continue;
955 if (sechdrs[i].sh_type == SHT_REL)
956 err = apply_relocations(sechdrs, strtab, symindex, i,
957 &mod);
958 else if (sechdrs[i].sh_type == SHT_RELA)
959 err = apply_relocate_add(sechdrs, strtab, symindex, i,
960 &mod);
961 if (err < 0)
962 return err;
965 } else {
966 struct elf_phdr *phdr = (struct elf_phdr *) ((char *)hdr + hdr->e_phoff);
968 for (i = 0; i < hdr->e_phnum; i++) {
969 if (phdr->p_type == PT_LOAD) {
970 memcpy((void *)phdr->p_paddr,
971 (char *)hdr + phdr->p_offset,
972 phdr->p_filesz);
973 memset((void *)phdr->p_paddr + phdr->p_filesz,
974 0, phdr->p_memsz - phdr->p_filesz);
976 phdr++;
979 for (i = 0; i < hdr->e_shnum; i++) {
980 /* Internal symbols and strings. */
981 if (sechdrs[i].sh_type == SHT_SYMTAB) {
982 symindex = i;
983 strindex = sechdrs[i].sh_link;
984 strtab = (char *)hdr + sechdrs[strindex].sh_offset;
986 /* mark the symtab's address for when we try to find the
987 magic symbols */
988 sechdrs[i].sh_addr = (size_t) hdr + sechdrs[i].sh_offset;
993 /* make sure it's physically written out */
994 flush_icache_range((unsigned long)v->load_addr,
995 (unsigned long)v->load_addr + v->len);
997 if ((find_vpe_symbols(v, sechdrs, symindex, strtab, &mod)) < 0) {
998 if (v->__start == 0) {
999 printk(KERN_WARNING "VPE loader: program does not contain "
1000 "a __start symbol\n");
1001 return -ENOEXEC;
1004 if (v->shared_ptr == NULL)
1005 printk(KERN_WARNING "VPE loader: "
1006 "program does not contain vpe_shared symbol.\n"
1007 " Unable to use AMVP (AP/SP) facilities.\n");
1010 printk(" elf loaded\n");
1011 return 0;
1014 static void cleanup_tc(struct tc *tc)
1016 unsigned long flags;
1017 unsigned int mtflags, vpflags;
1018 int tmp;
1020 local_irq_save(flags);
1021 mtflags = dmt();
1022 vpflags = dvpe();
1023 /* Put MVPE's into 'configuration state' */
1024 set_c0_mvpcontrol(MVPCONTROL_VPC);
1026 settc(tc->index);
1027 tmp = read_tc_c0_tcstatus();
1029 /* mark not allocated and not dynamically allocatable */
1030 tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
1031 tmp |= TCSTATUS_IXMT; /* interrupt exempt */
1032 write_tc_c0_tcstatus(tmp);
1034 write_tc_c0_tchalt(TCHALT_H);
1035 mips_ihb();
1037 /* bind it to anything other than VPE1 */
1038 // write_tc_c0_tcbind(read_tc_c0_tcbind() & ~TCBIND_CURVPE); // | TCBIND_CURVPE
1040 clear_c0_mvpcontrol(MVPCONTROL_VPC);
1041 evpe(vpflags);
1042 emt(mtflags);
1043 local_irq_restore(flags);
1046 static int getcwd(char *buff, int size)
1048 mm_segment_t old_fs;
1049 int ret;
1051 old_fs = get_fs();
1052 set_fs(KERNEL_DS);
1054 ret = sys_getcwd(buff, size);
1056 set_fs(old_fs);
1058 return ret;
1061 /* checks VPE is unused and gets ready to load program */
1062 static int vpe_open(struct inode *inode, struct file *filp)
1064 enum vpe_state state;
1065 struct vpe_notifications *not;
1066 struct vpe *v;
1067 int ret;
1069 if (minor != iminor(inode)) {
1070 /* assume only 1 device at the moment. */
1071 pr_warning("VPE loader: only vpe1 is supported\n");
1073 return -ENODEV;
1076 if ((v = get_vpe(tclimit)) == NULL) {
1077 pr_warning("VPE loader: unable to get vpe\n");
1079 return -ENODEV;
1082 state = xchg(&v->state, VPE_STATE_INUSE);
1083 if (state != VPE_STATE_UNUSED) {
1084 printk(KERN_DEBUG "VPE loader: tc in use dumping regs\n");
1086 list_for_each_entry(not, &v->notify, list) {
1087 not->stop(tclimit);
1090 release_progmem(v->load_addr);
1091 cleanup_tc(get_tc(tclimit));
1094 /* this of-course trashes what was there before... */
1095 v->pbuffer = vmalloc(P_SIZE);
1096 v->plen = P_SIZE;
1097 v->load_addr = NULL;
1098 v->len = 0;
1100 v->uid = filp->f_cred->fsuid;
1101 v->gid = filp->f_cred->fsgid;
1103 #ifdef CONFIG_MIPS_APSP_KSPD
1104 /* get kspd to tell us when a syscall_exit happens */
1105 if (!kspd_events_reqd) {
1106 kspd_notify(&kspd_events);
1107 kspd_events_reqd++;
1109 #endif
1111 v->cwd[0] = 0;
1112 ret = getcwd(v->cwd, VPE_PATH_MAX);
1113 if (ret < 0)
1114 printk(KERN_WARNING "VPE loader: open, getcwd returned %d\n", ret);
1116 v->shared_ptr = NULL;
1117 v->__start = 0;
1119 unlock_kernel();
1121 return 0;
1124 static int vpe_release(struct inode *inode, struct file *filp)
1126 struct vpe *v;
1127 Elf_Ehdr *hdr;
1128 int ret = 0;
1130 v = get_vpe(tclimit);
1131 if (v == NULL)
1132 return -ENODEV;
1134 hdr = (Elf_Ehdr *) v->pbuffer;
1135 if (memcmp(hdr->e_ident, ELFMAG, SELFMAG) == 0) {
1136 if (vpe_elfload(v) >= 0) {
1137 vpe_run(v);
1138 } else {
1139 printk(KERN_WARNING "VPE loader: ELF load failed.\n");
1140 ret = -ENOEXEC;
1142 } else {
1143 printk(KERN_WARNING "VPE loader: only elf files are supported\n");
1144 ret = -ENOEXEC;
1147 /* It's good to be able to run the SP and if it chokes have a look at
1148 the /dev/rt?. But if we reset the pointer to the shared struct we
1149 lose what has happened. So perhaps if garbage is sent to the vpe
1150 device, use it as a trigger for the reset. Hopefully a nice
1151 executable will be along shortly. */
1152 if (ret < 0)
1153 v->shared_ptr = NULL;
1155 // cleanup any temp buffers
1156 if (v->pbuffer)
1157 vfree(v->pbuffer);
1158 v->plen = 0;
1159 return ret;
1162 static ssize_t vpe_write(struct file *file, const char __user * buffer,
1163 size_t count, loff_t * ppos)
1165 size_t ret = count;
1166 struct vpe *v;
1168 if (iminor(file->f_path.dentry->d_inode) != minor)
1169 return -ENODEV;
1171 v = get_vpe(tclimit);
1172 if (v == NULL)
1173 return -ENODEV;
1175 if (v->pbuffer == NULL) {
1176 printk(KERN_ERR "VPE loader: no buffer for program\n");
1177 return -ENOMEM;
1180 if ((count + v->len) > v->plen) {
1181 printk(KERN_WARNING
1182 "VPE loader: elf size too big. Perhaps strip uneeded symbols\n");
1183 return -ENOMEM;
1186 count -= copy_from_user(v->pbuffer + v->len, buffer, count);
1187 if (!count)
1188 return -EFAULT;
1190 v->len += count;
1191 return ret;
1194 static const struct file_operations vpe_fops = {
1195 .owner = THIS_MODULE,
1196 .open = vpe_open,
1197 .release = vpe_release,
1198 .write = vpe_write
1201 /* module wrapper entry points */
1202 /* give me a vpe */
1203 vpe_handle vpe_alloc(void)
1205 int i;
1206 struct vpe *v;
1208 /* find a vpe */
1209 for (i = 1; i < MAX_VPES; i++) {
1210 if ((v = get_vpe(i)) != NULL) {
1211 v->state = VPE_STATE_INUSE;
1212 return v;
1215 return NULL;
1218 EXPORT_SYMBOL(vpe_alloc);
1220 /* start running from here */
1221 int vpe_start(vpe_handle vpe, unsigned long start)
1223 struct vpe *v = vpe;
1225 v->__start = start;
1226 return vpe_run(v);
1229 EXPORT_SYMBOL(vpe_start);
1231 /* halt it for now */
1232 int vpe_stop(vpe_handle vpe)
1234 struct vpe *v = vpe;
1235 struct tc *t;
1236 unsigned int evpe_flags;
1238 evpe_flags = dvpe();
1240 if ((t = list_entry(v->tc.next, struct tc, tc)) != NULL) {
1242 settc(t->index);
1243 write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA);
1246 evpe(evpe_flags);
1248 return 0;
1251 EXPORT_SYMBOL(vpe_stop);
1253 /* I've done with it thank you */
1254 int vpe_free(vpe_handle vpe)
1256 struct vpe *v = vpe;
1257 struct tc *t;
1258 unsigned int evpe_flags;
1260 if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) {
1261 return -ENOEXEC;
1264 evpe_flags = dvpe();
1266 /* Put MVPE's into 'configuration state' */
1267 set_c0_mvpcontrol(MVPCONTROL_VPC);
1269 settc(t->index);
1270 write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA);
1272 /* halt the TC */
1273 write_tc_c0_tchalt(TCHALT_H);
1274 mips_ihb();
1276 /* mark the TC unallocated */
1277 write_tc_c0_tcstatus(read_tc_c0_tcstatus() & ~TCSTATUS_A);
1279 v->state = VPE_STATE_UNUSED;
1281 clear_c0_mvpcontrol(MVPCONTROL_VPC);
1282 evpe(evpe_flags);
1284 return 0;
1287 EXPORT_SYMBOL(vpe_free);
1289 void *vpe_get_shared(int index)
1291 struct vpe *v;
1293 if ((v = get_vpe(index)) == NULL)
1294 return NULL;
1296 return v->shared_ptr;
1299 EXPORT_SYMBOL(vpe_get_shared);
1301 int vpe_getuid(int index)
1303 struct vpe *v;
1305 if ((v = get_vpe(index)) == NULL)
1306 return -1;
1308 return v->uid;
1311 EXPORT_SYMBOL(vpe_getuid);
1313 int vpe_getgid(int index)
1315 struct vpe *v;
1317 if ((v = get_vpe(index)) == NULL)
1318 return -1;
1320 return v->gid;
1323 EXPORT_SYMBOL(vpe_getgid);
1325 int vpe_notify(int index, struct vpe_notifications *notify)
1327 struct vpe *v;
1329 if ((v = get_vpe(index)) == NULL)
1330 return -1;
1332 list_add(&notify->list, &v->notify);
1333 return 0;
1336 EXPORT_SYMBOL(vpe_notify);
1338 char *vpe_getcwd(int index)
1340 struct vpe *v;
1342 if ((v = get_vpe(index)) == NULL)
1343 return NULL;
1345 return v->cwd;
1348 EXPORT_SYMBOL(vpe_getcwd);
1350 #ifdef CONFIG_MIPS_APSP_KSPD
1351 static void kspd_sp_exit( int sp_id)
1353 cleanup_tc(get_tc(sp_id));
1355 #endif
1357 static ssize_t store_kill(struct device *dev, struct device_attribute *attr,
1358 const char *buf, size_t len)
1360 struct vpe *vpe = get_vpe(tclimit);
1361 struct vpe_notifications *not;
1363 list_for_each_entry(not, &vpe->notify, list) {
1364 not->stop(tclimit);
1367 release_progmem(vpe->load_addr);
1368 cleanup_tc(get_tc(tclimit));
1369 vpe_stop(vpe);
1370 vpe_free(vpe);
1372 return len;
1375 static ssize_t show_ntcs(struct device *cd, struct device_attribute *attr,
1376 char *buf)
1378 struct vpe *vpe = get_vpe(tclimit);
1380 return sprintf(buf, "%d\n", vpe->ntcs);
1383 static ssize_t store_ntcs(struct device *dev, struct device_attribute *attr,
1384 const char *buf, size_t len)
1386 struct vpe *vpe = get_vpe(tclimit);
1387 unsigned long new;
1388 char *endp;
1390 new = simple_strtoul(buf, &endp, 0);
1391 if (endp == buf)
1392 goto out_einval;
1394 if (new == 0 || new > (hw_tcs - tclimit))
1395 goto out_einval;
1397 vpe->ntcs = new;
1399 return len;
1401 out_einval:
1402 return -EINVAL;
1405 static struct device_attribute vpe_class_attributes[] = {
1406 __ATTR(kill, S_IWUSR, NULL, store_kill),
1407 __ATTR(ntcs, S_IRUGO | S_IWUSR, show_ntcs, store_ntcs),
1411 static void vpe_device_release(struct device *cd)
1413 kfree(cd);
1416 struct class vpe_class = {
1417 .name = "vpe",
1418 .owner = THIS_MODULE,
1419 .dev_release = vpe_device_release,
1420 .dev_attrs = vpe_class_attributes,
1423 struct device vpe_device;
1425 static int __init vpe_module_init(void)
1427 unsigned int mtflags, vpflags;
1428 unsigned long flags, val;
1429 struct vpe *v = NULL;
1430 struct tc *t;
1431 int tc, err;
1433 if (!cpu_has_mipsmt) {
1434 printk("VPE loader: not a MIPS MT capable processor\n");
1435 return -ENODEV;
1438 if (vpelimit == 0) {
1439 printk(KERN_WARNING "No VPEs reserved for AP/SP, not "
1440 "initializing VPE loader.\nPass maxvpes=<n> argument as "
1441 "kernel argument\n");
1443 return -ENODEV;
1446 if (tclimit == 0) {
1447 printk(KERN_WARNING "No TCs reserved for AP/SP, not "
1448 "initializing VPE loader.\nPass maxtcs=<n> argument as "
1449 "kernel argument\n");
1451 return -ENODEV;
1454 major = register_chrdev(0, module_name, &vpe_fops);
1455 if (major < 0) {
1456 printk("VPE loader: unable to register character device\n");
1457 return major;
1460 err = class_register(&vpe_class);
1461 if (err) {
1462 printk(KERN_ERR "vpe_class registration failed\n");
1463 goto out_chrdev;
1466 device_initialize(&vpe_device);
1467 vpe_device.class = &vpe_class,
1468 vpe_device.parent = NULL,
1469 dev_set_name(&vpe_device, "vpe1");
1470 vpe_device.devt = MKDEV(major, minor);
1471 err = device_add(&vpe_device);
1472 if (err) {
1473 printk(KERN_ERR "Adding vpe_device failed\n");
1474 goto out_class;
1477 local_irq_save(flags);
1478 mtflags = dmt();
1479 vpflags = dvpe();
1481 /* Put MVPE's into 'configuration state' */
1482 set_c0_mvpcontrol(MVPCONTROL_VPC);
1484 /* dump_mtregs(); */
1486 val = read_c0_mvpconf0();
1487 hw_tcs = (val & MVPCONF0_PTC) + 1;
1488 hw_vpes = ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
1490 for (tc = tclimit; tc < hw_tcs; tc++) {
1492 * Must re-enable multithreading temporarily or in case we
1493 * reschedule send IPIs or similar we might hang.
1495 clear_c0_mvpcontrol(MVPCONTROL_VPC);
1496 evpe(vpflags);
1497 emt(mtflags);
1498 local_irq_restore(flags);
1499 t = alloc_tc(tc);
1500 if (!t) {
1501 err = -ENOMEM;
1502 goto out;
1505 local_irq_save(flags);
1506 mtflags = dmt();
1507 vpflags = dvpe();
1508 set_c0_mvpcontrol(MVPCONTROL_VPC);
1510 /* VPE's */
1511 if (tc < hw_tcs) {
1512 settc(tc);
1514 if ((v = alloc_vpe(tc)) == NULL) {
1515 printk(KERN_WARNING "VPE: unable to allocate VPE\n");
1517 goto out_reenable;
1520 v->ntcs = hw_tcs - tclimit;
1522 /* add the tc to the list of this vpe's tc's. */
1523 list_add(&t->tc, &v->tc);
1525 /* deactivate all but vpe0 */
1526 if (tc >= tclimit) {
1527 unsigned long tmp = read_vpe_c0_vpeconf0();
1529 tmp &= ~VPECONF0_VPA;
1531 /* master VPE */
1532 tmp |= VPECONF0_MVP;
1533 write_vpe_c0_vpeconf0(tmp);
1536 /* disable multi-threading with TC's */
1537 write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE);
1539 if (tc >= vpelimit) {
1541 * Set config to be the same as vpe0,
1542 * particularly kseg0 coherency alg
1544 write_vpe_c0_config(read_c0_config());
1548 /* TC's */
1549 t->pvpe = v; /* set the parent vpe */
1551 if (tc >= tclimit) {
1552 unsigned long tmp;
1554 settc(tc);
1556 /* Any TC that is bound to VPE0 gets left as is - in case
1557 we are running SMTC on VPE0. A TC that is bound to any
1558 other VPE gets bound to VPE0, ideally I'd like to make
1559 it homeless but it doesn't appear to let me bind a TC
1560 to a non-existent VPE. Which is perfectly reasonable.
1562 The (un)bound state is visible to an EJTAG probe so may
1563 notify GDB...
1566 if (((tmp = read_tc_c0_tcbind()) & TCBIND_CURVPE)) {
1567 /* tc is bound >vpe0 */
1568 write_tc_c0_tcbind(tmp & ~TCBIND_CURVPE);
1570 t->pvpe = get_vpe(0); /* set the parent vpe */
1573 /* halt the TC */
1574 write_tc_c0_tchalt(TCHALT_H);
1575 mips_ihb();
1577 tmp = read_tc_c0_tcstatus();
1579 /* mark not activated and not dynamically allocatable */
1580 tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
1581 tmp |= TCSTATUS_IXMT; /* interrupt exempt */
1582 write_tc_c0_tcstatus(tmp);
1586 out_reenable:
1587 /* release config state */
1588 clear_c0_mvpcontrol(MVPCONTROL_VPC);
1590 evpe(vpflags);
1591 emt(mtflags);
1592 local_irq_restore(flags);
1594 #ifdef CONFIG_MIPS_APSP_KSPD
1595 kspd_events.kspd_sp_exit = kspd_sp_exit;
1596 #endif
1597 return 0;
1599 out_class:
1600 class_unregister(&vpe_class);
1601 out_chrdev:
1602 unregister_chrdev(major, module_name);
1604 out:
1605 return err;
1608 static void __exit vpe_module_exit(void)
1610 struct vpe *v, *n;
1612 device_del(&vpe_device);
1613 unregister_chrdev(major, module_name);
1615 /* No locking needed here */
1616 list_for_each_entry_safe(v, n, &vpecontrol.vpe_list, list) {
1617 if (v->state != VPE_STATE_UNUSED)
1618 release_vpe(v);
1622 module_init(vpe_module_init);
1623 module_exit(vpe_module_exit);
1624 MODULE_DESCRIPTION("MIPS VPE Loader");
1625 MODULE_AUTHOR("Elizabeth Oldham, MIPS Technologies, Inc.");
1626 MODULE_LICENSE("GPL");