First Support on Ginger and OMAP TI
[linux-ginger.git] / arch / powerpc / platforms / cell / smp.c
blobf774530075b749122424549c2c4009a32737cd0f
1 /*
2 * SMP support for BPA machines.
4 * Dave Engebretsen, Peter Bergner, and
5 * Mike Corrigan {engebret|bergner|mikec}@us.ibm.com
7 * Plus various changes from other IBM teams...
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License
11 * as published by the Free Software Foundation; either version
12 * 2 of the License, or (at your option) any later version.
15 #undef DEBUG
17 #include <linux/kernel.h>
18 #include <linux/module.h>
19 #include <linux/sched.h>
20 #include <linux/smp.h>
21 #include <linux/interrupt.h>
22 #include <linux/delay.h>
23 #include <linux/init.h>
24 #include <linux/spinlock.h>
25 #include <linux/cache.h>
26 #include <linux/err.h>
27 #include <linux/sysdev.h>
28 #include <linux/cpu.h>
30 #include <asm/ptrace.h>
31 #include <asm/atomic.h>
32 #include <asm/irq.h>
33 #include <asm/page.h>
34 #include <asm/pgtable.h>
35 #include <asm/io.h>
36 #include <asm/prom.h>
37 #include <asm/smp.h>
38 #include <asm/paca.h>
39 #include <asm/machdep.h>
40 #include <asm/cputable.h>
41 #include <asm/firmware.h>
42 #include <asm/system.h>
43 #include <asm/rtas.h>
44 #include <asm/cputhreads.h>
46 #include "interrupt.h"
47 #include <asm/udbg.h>
49 #ifdef DEBUG
50 #define DBG(fmt...) udbg_printf(fmt)
51 #else
52 #define DBG(fmt...)
53 #endif
56 * The Primary thread of each non-boot processor was started from the OF client
57 * interface by prom_hold_cpus and is spinning on secondary_hold_spinloop.
59 static cpumask_t of_spin_map;
61 /**
62 * smp_startup_cpu() - start the given cpu
64 * At boot time, there is nothing to do for primary threads which were
65 * started from Open Firmware. For anything else, call RTAS with the
66 * appropriate start location.
68 * Returns:
69 * 0 - failure
70 * 1 - success
72 static inline int __devinit smp_startup_cpu(unsigned int lcpu)
74 int status;
75 unsigned long start_here = __pa((u32)*((unsigned long *)
76 generic_secondary_smp_init));
77 unsigned int pcpu;
78 int start_cpu;
80 if (cpu_isset(lcpu, of_spin_map))
81 /* Already started by OF and sitting in spin loop */
82 return 1;
84 pcpu = get_hard_smp_processor_id(lcpu);
86 /* Fixup atomic count: it exited inside IRQ handler. */
87 task_thread_info(paca[lcpu].__current)->preempt_count = 0;
90 * If the RTAS start-cpu token does not exist then presume the
91 * cpu is already spinning.
93 start_cpu = rtas_token("start-cpu");
94 if (start_cpu == RTAS_UNKNOWN_SERVICE)
95 return 1;
97 status = rtas_call(start_cpu, 3, 1, NULL, pcpu, start_here, lcpu);
98 if (status != 0) {
99 printk(KERN_ERR "start-cpu failed: %i\n", status);
100 return 0;
103 return 1;
106 static void smp_iic_message_pass(int target, int msg)
108 unsigned int i;
110 if (target < NR_CPUS) {
111 iic_cause_IPI(target, msg);
112 } else {
113 for_each_online_cpu(i) {
114 if (target == MSG_ALL_BUT_SELF
115 && i == smp_processor_id())
116 continue;
117 iic_cause_IPI(i, msg);
122 static int __init smp_iic_probe(void)
124 iic_request_IPIs();
126 return cpus_weight(cpu_possible_map);
129 static void __devinit smp_cell_setup_cpu(int cpu)
131 if (cpu != boot_cpuid)
132 iic_setup_cpu();
135 * change default DABRX to allow user watchpoints
137 mtspr(SPRN_DABRX, DABRX_KERNEL | DABRX_USER);
140 static void __devinit smp_cell_kick_cpu(int nr)
142 BUG_ON(nr < 0 || nr >= NR_CPUS);
144 if (!smp_startup_cpu(nr))
145 return;
148 * The processor is currently spinning, waiting for the
149 * cpu_start field to become non-zero After we set cpu_start,
150 * the processor will continue on to secondary_start
152 paca[nr].cpu_start = 1;
155 static int smp_cell_cpu_bootable(unsigned int nr)
157 /* Special case - we inhibit secondary thread startup
158 * during boot if the user requests it. Odd-numbered
159 * cpus are assumed to be secondary threads.
161 if (system_state < SYSTEM_RUNNING &&
162 cpu_has_feature(CPU_FTR_SMT) &&
163 !smt_enabled_at_boot && cpu_thread_in_core(nr) != 0)
164 return 0;
166 return 1;
168 static struct smp_ops_t bpa_iic_smp_ops = {
169 .message_pass = smp_iic_message_pass,
170 .probe = smp_iic_probe,
171 .kick_cpu = smp_cell_kick_cpu,
172 .setup_cpu = smp_cell_setup_cpu,
173 .cpu_bootable = smp_cell_cpu_bootable,
176 /* This is called very early */
177 void __init smp_init_cell(void)
179 int i;
181 DBG(" -> smp_init_cell()\n");
183 smp_ops = &bpa_iic_smp_ops;
185 /* Mark threads which are still spinning in hold loops. */
186 if (cpu_has_feature(CPU_FTR_SMT)) {
187 for_each_present_cpu(i) {
188 if (cpu_thread_in_core(i) == 0)
189 cpu_set(i, of_spin_map);
191 } else {
192 of_spin_map = cpu_present_map;
195 cpu_clear(boot_cpuid, of_spin_map);
197 /* Non-lpar has additional take/give timebase */
198 if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) {
199 smp_ops->give_timebase = rtas_give_timebase;
200 smp_ops->take_timebase = rtas_take_timebase;
203 DBG(" <- smp_init_cell()\n");