arch/sparc/include/asm/cache.h

   1 /* cache.h:  Cache specific code for the Sparc.  These include flushing
   2  *           and direct tag/data line access.
   3  *
   4  * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
   5  */
   6
   7 #ifndef _SPARC_CACHE_H
   8 #define _SPARC_CACHE_H
   9
  10 #define L1_CACHE_SHIFT 5
  11 #define L1_CACHE_BYTES 32
  12 #define L1_CACHE_ALIGN(x) ((((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1)))
  13
  14 #ifdef CONFIG_SPARC32
  15 #define SMP_CACHE_BYTES_SHIFT 5
  16 #else
  17 #define SMP_CACHE_BYTES_SHIFT 6
  18 #endif
  19
  20 #define SMP_CACHE_BYTES (1 << SMP_CACHE_BYTES_SHIFT)
  21
  22 #define __read_mostly __attribute__((__section__(".data.read_mostly")))
  23
  24 #ifdef CONFIG_SPARC32
  25 #include <asm/asi.h>
  26
  27 /* Direct access to the instruction cache is provided through and
  28  * alternate address space.  The IDC bit must be off in the ICCR on
  29  * HyperSparcs for these accesses to work.  The code below does not do
  30  * any checking, the caller must do so.  These routines are for
  31  * diagnostics only, but could end up being useful.  Use with care.
  32  * Also, you are asking for trouble if you execute these in one of the
  33  * three instructions following a %asr/%psr access or modification.
  34  */
  35
  36 /* First, cache-tag access. */
  37 static inline unsigned int get_icache_tag(int setnum, int tagnum)
  38 {
  39         unsigned int vaddr, retval;
  40
  41         vaddr = ((setnum&1) << 12) | ((tagnum&0x7f) << 5);
  42         __asm__ __volatile__("lda [%1] %2, %0\n\t" :
  43                              "=r" (retval) :
  44                              "r" (vaddr), "i" (ASI_M_TXTC_TAG));
  45         return retval;
  46 }
  47
  48 static inline void put_icache_tag(int setnum, int tagnum, unsigned int entry)
  49 {
  50         unsigned int vaddr;
  51
  52         vaddr = ((setnum&1) << 12) | ((tagnum&0x7f) << 5);
  53         __asm__ __volatile__("sta %0, [%1] %2\n\t" : :
  54                              "r" (entry), "r" (vaddr), "i" (ASI_M_TXTC_TAG) :
  55                              "memory");
  56 }
  57
  58 /* Second cache-data access.  The data is returned two-32bit quantities
  59  * at a time.
  60  */
  61 static inline void get_icache_data(int setnum, int tagnum, int subblock,
  62                                        unsigned int *data)
  63 {
  64         unsigned int value1, value2, vaddr;
  65
  66         vaddr = ((setnum&0x1) << 12) | ((tagnum&0x7f) << 5) |
  67                 ((subblock&0x3) << 3);
  68         __asm__ __volatile__("ldda [%2] %3, %%g2\n\t"
  69                              "or %%g0, %%g2, %0\n\t"
  70                              "or %%g0, %%g3, %1\n\t" :
  71                              "=r" (value1), "=r" (value2) :
  72                              "r" (vaddr), "i" (ASI_M_TXTC_DATA) :
  73                              "g2", "g3");
  74         data[0] = value1; data[1] = value2;
  75 }
  76
  77 static inline void put_icache_data(int setnum, int tagnum, int subblock,
  78                                        unsigned int *data)
  79 {
  80         unsigned int value1, value2, vaddr;
  81
  82         vaddr = ((setnum&0x1) << 12) | ((tagnum&0x7f) << 5) |
  83                 ((subblock&0x3) << 3);
  84         value1 = data[0]; value2 = data[1];
  85         __asm__ __volatile__("or %%g0, %0, %%g2\n\t"
  86                              "or %%g0, %1, %%g3\n\t"
  87                              "stda %%g2, [%2] %3\n\t" : :
  88                              "r" (value1), "r" (value2),
  89                              "r" (vaddr), "i" (ASI_M_TXTC_DATA) :
  90                              "g2", "g3", "memory" /* no joke */);
  91 }
  92
  93 /* Different types of flushes with the ICACHE.  Some of the flushes
  94  * affect both the ICACHE and the external cache.  Others only clear
  95  * the ICACHE entries on the cpu itself.  V8's (most) allow
  96  * granularity of flushes on the packet (element in line), whole line,
  97  * and entire cache (ie. all lines) level.  The ICACHE only flushes are
  98  * ROSS HyperSparc specific and are in ross.h
  99  */
 100
 101 /* Flushes which clear out both the on-chip and external caches */
 102 static inline void flush_ei_page(unsigned int addr)
 103 {
 104         __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
 105                              "r" (addr), "i" (ASI_M_FLUSH_PAGE) :
 106                              "memory");
 107 }
 108
 109 static inline void flush_ei_seg(unsigned int addr)
 110 {
 111         __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
 112                              "r" (addr), "i" (ASI_M_FLUSH_SEG) :
 113                              "memory");
 114 }
 115
 116 static inline void flush_ei_region(unsigned int addr)
 117 {
 118         __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
 119                              "r" (addr), "i" (ASI_M_FLUSH_REGION) :
 120                              "memory");
 121 }
 122
 123 static inline void flush_ei_ctx(unsigned int addr)
 124 {
 125         __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
 126                              "r" (addr), "i" (ASI_M_FLUSH_CTX) :
 127                              "memory");
 128 }
 129
 130 static inline void flush_ei_user(unsigned int addr)
 131 {
 132         __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
 133                              "r" (addr), "i" (ASI_M_FLUSH_USER) :
 134                              "memory");
 135 }
 136 #endif /* CONFIG_SPARC32 */
 137
 138 #endif /* !(_SPARC_CACHE_H) */