2 mainmenu "Linux Kernel Configuration for x86"
6 bool "64-bit kernel" if ARCH = "x86"
7 default ARCH = "x86_64"
9 Say yes to build a 64-bit kernel - formerly known as x86_64
10 Say no to build a 32-bit kernel - formerly known as i386
21 select HAVE_AOUT if X86_32
24 select HAVE_UNSTABLE_SCHED_CLOCK
27 select HAVE_PERF_EVENTS if (!M386 && !M486)
28 select HAVE_IOREMAP_PROT
30 select ARCH_WANT_OPTIONAL_GPIOLIB
31 select ARCH_WANT_FRAME_POINTERS
33 select HAVE_KRETPROBES
34 select HAVE_FTRACE_MCOUNT_RECORD
35 select HAVE_DYNAMIC_FTRACE
36 select HAVE_FUNCTION_TRACER
37 select HAVE_FUNCTION_GRAPH_TRACER
38 select HAVE_FUNCTION_GRAPH_FP_TEST
39 select HAVE_FUNCTION_TRACE_MCOUNT_TEST
40 select HAVE_FTRACE_NMI_ENTER if DYNAMIC_FTRACE
41 select HAVE_SYSCALL_TRACEPOINTS
44 select HAVE_ARCH_TRACEHOOK
45 select HAVE_GENERIC_DMA_COHERENT if X86_32
46 select HAVE_EFFICIENT_UNALIGNED_ACCESS
47 select USER_STACKTRACE_SUPPORT
48 select HAVE_DMA_API_DEBUG
49 select HAVE_KERNEL_GZIP
50 select HAVE_KERNEL_BZIP2
51 select HAVE_KERNEL_LZMA
52 select HAVE_ARCH_KMEMCHECK
56 default "elf32-i386" if X86_32
57 default "elf64-x86-64" if X86_64
61 default "arch/x86/configs/i386_defconfig" if X86_32
62 default "arch/x86/configs/x86_64_defconfig" if X86_64
67 config GENERIC_CMOS_UPDATE
70 config CLOCKSOURCE_WATCHDOG
73 config GENERIC_CLOCKEVENTS
76 config GENERIC_CLOCKEVENTS_BROADCAST
78 depends on X86_64 || (X86_32 && X86_LOCAL_APIC)
80 config LOCKDEP_SUPPORT
83 config STACKTRACE_SUPPORT
86 config HAVE_LATENCYTOP_SUPPORT
98 config GENERIC_ISA_DMA
107 select GENERIC_BUG_RELATIVE_POINTERS if X86_64
109 config GENERIC_BUG_RELATIVE_POINTERS
112 config GENERIC_HWEIGHT
118 config ARCH_MAY_HAVE_PC_FDC
121 config RWSEM_GENERIC_SPINLOCK
124 config RWSEM_XCHGADD_ALGORITHM
127 config ARCH_HAS_CPU_IDLE_WAIT
130 config GENERIC_CALIBRATE_DELAY
133 config GENERIC_TIME_VSYSCALL
137 config ARCH_HAS_CPU_RELAX
140 config ARCH_HAS_DEFAULT_IDLE
143 config ARCH_HAS_CACHE_LINE_SIZE
146 config HAVE_SETUP_PER_CPU_AREA
149 config NEED_PER_CPU_EMBED_FIRST_CHUNK
152 config NEED_PER_CPU_PAGE_FIRST_CHUNK
155 config HAVE_CPUMASK_OF_CPU_MAP
158 config ARCH_HIBERNATION_POSSIBLE
161 config ARCH_SUSPEND_POSSIBLE
168 config ARCH_POPULATES_NODE_MAP
175 config ARCH_SUPPORTS_OPTIMIZED_INLINING
178 config ARCH_SUPPORTS_DEBUG_PAGEALLOC
181 config HAVE_INTEL_TXT
183 depends on EXPERIMENTAL && DMAR && ACPI
185 # Use the generic interrupt handling code in kernel/irq/:
186 config GENERIC_HARDIRQS
190 config GENERIC_HARDIRQS_NO__DO_IRQ
193 config GENERIC_IRQ_PROBE
197 config GENERIC_PENDING_IRQ
199 depends on GENERIC_HARDIRQS && SMP
202 config USE_GENERIC_SMP_HELPERS
208 depends on X86_32 && SMP
212 depends on X86_64 && SMP
219 config X86_TRAMPOLINE
221 depends on SMP || (64BIT && ACPI_SLEEP)
224 config X86_32_LAZY_GS
226 depends on X86_32 && !CC_STACKPROTECTOR
230 source "init/Kconfig"
231 source "kernel/Kconfig.freezer"
233 menu "Processor type and features"
235 source "kernel/time/Kconfig"
238 bool "Symmetric multi-processing support"
240 This enables support for systems with more than one CPU. If you have
241 a system with only one CPU, like most personal computers, say N. If
242 you have a system with more than one CPU, say Y.
244 If you say N here, the kernel will run on single and multiprocessor
245 machines, but will use only one CPU of a multiprocessor machine. If
246 you say Y here, the kernel will run on many, but not all,
247 singleprocessor machines. On a singleprocessor machine, the kernel
248 will run faster if you say N here.
250 Note that if you say Y here and choose architecture "586" or
251 "Pentium" under "Processor family", the kernel will not work on 486
252 architectures. Similarly, multiprocessor kernels for the "PPro"
253 architecture may not work on all Pentium based boards.
255 People using multiprocessor machines who say Y here should also say
256 Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
257 Management" code will be disabled if you say Y here.
259 See also <file:Documentation/i386/IO-APIC.txt>,
260 <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
261 <http://www.tldp.org/docs.html#howto>.
263 If you don't know what to do here, say N.
266 bool "Support x2apic"
267 depends on X86_LOCAL_APIC && X86_64 && INTR_REMAP
269 This enables x2apic support on CPUs that have this feature.
271 This allows 32-bit apic IDs (so it can support very large systems),
272 and accesses the local apic via MSRs not via mmio.
274 If you don't know what to do here, say N.
277 bool "Support sparse irq numbering"
278 depends on PCI_MSI || HT_IRQ
280 This enables support for sparse irqs. This is useful for distro
281 kernels that want to define a high CONFIG_NR_CPUS value but still
282 want to have low kernel memory footprint on smaller machines.
284 ( Sparse IRQs can also be beneficial on NUMA boxes, as they spread
285 out the irq_desc[] array in a more NUMA-friendly way. )
287 If you don't know what to do here, say N.
291 depends on SPARSE_IRQ && NUMA
294 bool "Enable MPS table" if ACPI
296 depends on X86_LOCAL_APIC
298 For old smp systems that do not have proper acpi support. Newer systems
299 (esp with 64bit cpus) with acpi support, MADT and DSDT will override it
302 bool "Support for big SMP systems with more than 8 CPUs"
303 depends on X86_32 && SMP
305 This option is needed for the systems that have more than 8 CPUs
308 config X86_EXTENDED_PLATFORM
309 bool "Support for extended (non-PC) x86 platforms"
312 If you disable this option then the kernel will only support
313 standard PC platforms. (which covers the vast majority of
316 If you enable this option then you'll be able to select support
317 for the following (non-PC) 32 bit x86 platforms:
321 SGI 320/540 (Visual Workstation)
322 Summit/EXA (IBM x440)
323 Unisys ES7000 IA32 series
324 Moorestown MID devices
326 If you have one of these systems, or if you want to build a
327 generic distribution kernel, say Y here - otherwise say N.
331 config X86_EXTENDED_PLATFORM
332 bool "Support for extended (non-PC) x86 platforms"
335 If you disable this option then the kernel will only support
336 standard PC platforms. (which covers the vast majority of
339 If you enable this option then you'll be able to select support
340 for the following (non-PC) 64 bit x86 platforms:
344 If you have one of these systems, or if you want to build a
345 generic distribution kernel, say Y here - otherwise say N.
347 # This is an alphabetically sorted list of 64 bit extended platforms
348 # Please maintain the alphabetic order if and when there are additions
353 depends on X86_64 && PCI
354 depends on X86_EXTENDED_PLATFORM
356 Support for ScaleMP vSMP systems. Say 'Y' here if this kernel is
357 supposed to run on these EM64T-based machines. Only choose this option
358 if you have one of these machines.
361 bool "SGI Ultraviolet"
363 depends on X86_EXTENDED_PLATFORM
365 depends on X86_X2APIC
367 This option is needed in order to support SGI Ultraviolet systems.
368 If you don't have one of these, you should say N here.
370 # Following is an alphabetically sorted list of 32 bit extended platforms
371 # Please maintain the alphabetic order if and when there are additions
376 depends on X86_EXTENDED_PLATFORM
378 Select this for an AMD Elan processor.
380 Do not use this option for K6/Athlon/Opteron processors!
382 If unsure, choose "PC-compatible" instead.
385 bool "Moorestown MID platform"
387 depends on X86_EXTENDED_PLATFORM
389 Moorestown is Intel's Low Power Intel Architecture (LPIA) based Moblin
390 Internet Device(MID) platform. Moorestown consists of two chips:
391 Lincroft (CPU core, graphics, and memory controller) and Langwell IOH.
392 Unlike standard x86 PCs, Moorestown does not have many legacy devices
393 nor standard legacy replacement devices/features. e.g. Moorestown does
394 not contain i8259, i8254, HPET, legacy BIOS, most of the io ports.
397 bool "RDC R-321x SoC"
399 depends on X86_EXTENDED_PLATFORM
401 select X86_REBOOTFIXUPS
403 This option is needed for RDC R-321x system-on-chip, also known
405 If you don't have one of these chips, you should say N here.
407 config X86_32_NON_STANDARD
408 bool "Support non-standard 32-bit SMP architectures"
409 depends on X86_32 && SMP
410 depends on X86_EXTENDED_PLATFORM
412 This option compiles in the NUMAQ, Summit, bigsmp, ES7000, default
413 subarchitectures. It is intended for a generic binary kernel.
414 if you select them all, kernel will probe it one by one. and will
417 # Alphabetically sorted list of Non standard 32 bit platforms
420 bool "NUMAQ (IBM/Sequent)"
421 depends on X86_32_NON_STANDARD
425 This option is used for getting Linux to run on a NUMAQ (IBM/Sequent)
426 NUMA multiquad box. This changes the way that processors are
427 bootstrapped, and uses Clustered Logical APIC addressing mode instead
428 of Flat Logical. You will need a new lynxer.elf file to flash your
429 firmware with - send email to <Martin.Bligh@us.ibm.com>.
431 config X86_SUPPORTS_MEMORY_FAILURE
433 # MCE code calls memory_failure():
435 # On 32-bit this adds too big of NODES_SHIFT and we run out of page flags:
436 depends on !X86_NUMAQ
437 # On 32-bit SPARSEMEM adds too big of SECTIONS_WIDTH:
438 depends on X86_64 || !SPARSEMEM
439 select ARCH_SUPPORTS_MEMORY_FAILURE
443 bool "SGI 320/540 (Visual Workstation)"
444 depends on X86_32 && PCI && X86_MPPARSE && PCI_GODIRECT
445 depends on X86_32_NON_STANDARD
447 The SGI Visual Workstation series is an IA32-based workstation
448 based on SGI systems chips with some legacy PC hardware attached.
450 Say Y here to create a kernel to run on the SGI 320 or 540.
452 A kernel compiled for the Visual Workstation will run on general
453 PCs as well. See <file:Documentation/sgi-visws.txt> for details.
456 bool "Summit/EXA (IBM x440)"
457 depends on X86_32_NON_STANDARD
459 This option is needed for IBM systems that use the Summit/EXA chipset.
460 In particular, it is needed for the x440.
463 bool "Unisys ES7000 IA32 series"
464 depends on X86_32_NON_STANDARD && X86_BIGSMP
466 Support for Unisys ES7000 systems. Say 'Y' here if this kernel is
467 supposed to run on an IA32-based Unisys ES7000 system.
469 config SCHED_OMIT_FRAME_POINTER
471 prompt "Single-depth WCHAN output"
474 Calculate simpler /proc/<PID>/wchan values. If this option
475 is disabled then wchan values will recurse back to the
476 caller function. This provides more accurate wchan values,
477 at the expense of slightly more scheduling overhead.
479 If in doubt, say "Y".
481 menuconfig PARAVIRT_GUEST
482 bool "Paravirtualized guest support"
484 Say Y here to get to see options related to running Linux under
485 various hypervisors. This option alone does not add any kernel code.
487 If you say N, all options in this submenu will be skipped and disabled.
491 source "arch/x86/xen/Kconfig"
494 bool "VMI Guest support (DEPRECATED)"
498 VMI provides a paravirtualized interface to the VMware ESX server
499 (it could be used by other hypervisors in theory too, but is not
500 at the moment), by linking the kernel to a GPL-ed ROM module
501 provided by the hypervisor.
503 As of September 2009, VMware has started a phased retirement
504 of this feature from VMware's products. Please see
505 feature-removal-schedule.txt for details. If you are
506 planning to enable this option, please note that you cannot
507 live migrate a VMI enabled VM to a future VMware product,
508 which doesn't support VMI. So if you expect your kernel to
509 seamlessly migrate to newer VMware products, keep this
513 bool "KVM paravirtualized clock"
515 select PARAVIRT_CLOCK
517 Turning on this option will allow you to run a paravirtualized clock
518 when running over the KVM hypervisor. Instead of relying on a PIT
519 (or probably other) emulation by the underlying device model, the host
520 provides the guest with timing infrastructure such as time of day, and
524 bool "KVM Guest support"
527 This option enables various optimizations for running under the KVM
530 source "arch/x86/lguest/Kconfig"
533 bool "Enable paravirtualization code"
535 This changes the kernel so it can modify itself when it is run
536 under a hypervisor, potentially improving performance significantly
537 over full virtualization. However, when run without a hypervisor
538 the kernel is theoretically slower and slightly larger.
540 config PARAVIRT_SPINLOCKS
541 bool "Paravirtualization layer for spinlocks"
542 depends on PARAVIRT && SMP && EXPERIMENTAL
544 Paravirtualized spinlocks allow a pvops backend to replace the
545 spinlock implementation with something virtualization-friendly
546 (for example, block the virtual CPU rather than spinning).
548 Unfortunately the downside is an up to 5% performance hit on
549 native kernels, with various workloads.
551 If you are unsure how to answer this question, answer N.
553 config PARAVIRT_CLOCK
559 config PARAVIRT_DEBUG
560 bool "paravirt-ops debugging"
561 depends on PARAVIRT && DEBUG_KERNEL
563 Enable to debug paravirt_ops internals. Specifically, BUG if
564 a paravirt_op is missing when it is called.
569 This option adds a kernel parameter 'memtest', which allows memtest
571 memtest=0, mean disabled; -- default
572 memtest=1, mean do 1 test pattern;
574 memtest=4, mean do 4 test patterns.
575 If you are unsure how to answer this question, answer N.
577 config X86_SUMMIT_NUMA
579 depends on X86_32 && NUMA && X86_32_NON_STANDARD
581 config X86_CYCLONE_TIMER
583 depends on X86_32_NON_STANDARD
585 source "arch/x86/Kconfig.cpu"
589 prompt "HPET Timer Support" if X86_32
591 Use the IA-PC HPET (High Precision Event Timer) to manage
592 time in preference to the PIT and RTC, if a HPET is
594 HPET is the next generation timer replacing legacy 8254s.
595 The HPET provides a stable time base on SMP
596 systems, unlike the TSC, but it is more expensive to access,
597 as it is off-chip. You can find the HPET spec at
598 <http://www.intel.com/hardwaredesign/hpetspec_1.pdf>.
600 You can safely choose Y here. However, HPET will only be
601 activated if the platform and the BIOS support this feature.
602 Otherwise the 8254 will be used for timing services.
604 Choose N to continue using the legacy 8254 timer.
606 config HPET_EMULATE_RTC
608 depends on HPET_TIMER && (RTC=y || RTC=m || RTC_DRV_CMOS=m || RTC_DRV_CMOS=y)
610 # Mark as embedded because too many people got it wrong.
611 # The code disables itself when not needed.
614 bool "Enable DMI scanning" if EMBEDDED
616 Enabled scanning of DMI to identify machine quirks. Say Y
617 here unless you have verified that your setup is not
618 affected by entries in the DMI blacklist. Required by PNP
622 bool "GART IOMMU support" if EMBEDDED
625 depends on X86_64 && PCI
627 Support for full DMA access of devices with 32bit memory access only
628 on systems with more than 3GB. This is usually needed for USB,
629 sound, many IDE/SATA chipsets and some other devices.
630 Provides a driver for the AMD Athlon64/Opteron/Turion/Sempron GART
631 based hardware IOMMU and a software bounce buffer based IOMMU used
632 on Intel systems and as fallback.
633 The code is only active when needed (enough memory and limited
634 device) unless CONFIG_IOMMU_DEBUG or iommu=force is specified
638 bool "IBM Calgary IOMMU support"
640 depends on X86_64 && PCI && EXPERIMENTAL
642 Support for hardware IOMMUs in IBM's xSeries x366 and x460
643 systems. Needed to run systems with more than 3GB of memory
644 properly with 32-bit PCI devices that do not support DAC
645 (Double Address Cycle). Calgary also supports bus level
646 isolation, where all DMAs pass through the IOMMU. This
647 prevents them from going anywhere except their intended
648 destination. This catches hard-to-find kernel bugs and
649 mis-behaving drivers and devices that do not use the DMA-API
650 properly to set up their DMA buffers. The IOMMU can be
651 turned off at boot time with the iommu=off parameter.
652 Normally the kernel will make the right choice by itself.
655 config CALGARY_IOMMU_ENABLED_BY_DEFAULT
657 prompt "Should Calgary be enabled by default?"
658 depends on CALGARY_IOMMU
660 Should Calgary be enabled by default? if you choose 'y', Calgary
661 will be used (if it exists). If you choose 'n', Calgary will not be
662 used even if it exists. If you choose 'n' and would like to use
663 Calgary anyway, pass 'iommu=calgary' on the kernel command line.
667 bool "AMD IOMMU support"
670 depends on X86_64 && PCI && ACPI
672 With this option you can enable support for AMD IOMMU hardware in
673 your system. An IOMMU is a hardware component which provides
674 remapping of DMA memory accesses from devices. With an AMD IOMMU you
675 can isolate the the DMA memory of different devices and protect the
676 system from misbehaving device drivers or hardware.
678 You can find out if your system has an AMD IOMMU if you look into
679 your BIOS for an option to enable it or if you have an IVRS ACPI
682 config AMD_IOMMU_STATS
683 bool "Export AMD IOMMU statistics to debugfs"
687 This option enables code in the AMD IOMMU driver to collect various
688 statistics about whats happening in the driver and exports that
689 information to userspace via debugfs.
692 # need this always selected by IOMMU for the VIA workaround
696 Support for software bounce buffers used on x86-64 systems
697 which don't have a hardware IOMMU (e.g. the current generation
698 of Intel's x86-64 CPUs). Using this PCI devices which can only
699 access 32-bits of memory can be used on systems with more than
700 3 GB of memory. If unsure, say Y.
703 def_bool (CALGARY_IOMMU || GART_IOMMU || SWIOTLB || AMD_IOMMU)
706 def_bool (AMD_IOMMU || DMAR)
709 bool "Configure Maximum number of SMP Processors and NUMA Nodes"
710 depends on X86_64 && SMP && DEBUG_KERNEL && EXPERIMENTAL
711 select CPUMASK_OFFSTACK
714 Configure maximum number of CPUS and NUMA Nodes for this architecture.
718 int "Maximum number of CPUs" if SMP && !MAXSMP
719 range 2 8 if SMP && X86_32 && !X86_BIGSMP
720 range 2 512 if SMP && !MAXSMP
722 default "4096" if MAXSMP
723 default "32" if SMP && (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000)
726 This allows you to specify the maximum number of CPUs which this
727 kernel will support. The maximum supported value is 512 and the
728 minimum value which makes sense is 2.
730 This is purely to save memory - each supported CPU adds
731 approximately eight kilobytes to the kernel image.
734 bool "SMT (Hyperthreading) scheduler support"
737 SMT scheduler support improves the CPU scheduler's decision making
738 when dealing with Intel Pentium 4 chips with HyperThreading at a
739 cost of slightly increased overhead in some places. If unsure say
744 prompt "Multi-core scheduler support"
747 Multi-core scheduler support improves the CPU scheduler's decision
748 making when dealing with multi-core CPU chips at a cost of slightly
749 increased overhead in some places. If unsure say N here.
751 source "kernel/Kconfig.preempt"
754 bool "Local APIC support on uniprocessors"
755 depends on X86_32 && !SMP && !X86_32_NON_STANDARD
757 A local APIC (Advanced Programmable Interrupt Controller) is an
758 integrated interrupt controller in the CPU. If you have a single-CPU
759 system which has a processor with a local APIC, you can say Y here to
760 enable and use it. If you say Y here even though your machine doesn't
761 have a local APIC, then the kernel will still run with no slowdown at
762 all. The local APIC supports CPU-generated self-interrupts (timer,
763 performance counters), and the NMI watchdog which detects hard
767 bool "IO-APIC support on uniprocessors"
768 depends on X86_UP_APIC
770 An IO-APIC (I/O Advanced Programmable Interrupt Controller) is an
771 SMP-capable replacement for PC-style interrupt controllers. Most
772 SMP systems and many recent uniprocessor systems have one.
774 If you have a single-CPU system with an IO-APIC, you can say Y here
775 to use it. If you say Y here even though your machine doesn't have
776 an IO-APIC, then the kernel will still run with no slowdown at all.
778 config X86_LOCAL_APIC
780 depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC
784 depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC
786 config X86_VISWS_APIC
788 depends on X86_32 && X86_VISWS
790 config X86_REROUTE_FOR_BROKEN_BOOT_IRQS
791 bool "Reroute for broken boot IRQs"
793 depends on X86_IO_APIC
795 This option enables a workaround that fixes a source of
796 spurious interrupts. This is recommended when threaded
797 interrupt handling is used on systems where the generation of
798 superfluous "boot interrupts" cannot be disabled.
800 Some chipsets generate a legacy INTx "boot IRQ" when the IRQ
801 entry in the chipset's IO-APIC is masked (as, e.g. the RT
802 kernel does during interrupt handling). On chipsets where this
803 boot IRQ generation cannot be disabled, this workaround keeps
804 the original IRQ line masked so that only the equivalent "boot
805 IRQ" is delivered to the CPUs. The workaround also tells the
806 kernel to set up the IRQ handler on the boot IRQ line. In this
807 way only one interrupt is delivered to the kernel. Otherwise
808 the spurious second interrupt may cause the kernel to bring
809 down (vital) interrupt lines.
811 Only affects "broken" chipsets. Interrupt sharing may be
812 increased on these systems.
815 bool "Machine Check / overheating reporting"
817 Machine Check support allows the processor to notify the
818 kernel if it detects a problem (e.g. overheating, data corruption).
819 The action the kernel takes depends on the severity of the problem,
820 ranging from warning messages to halting the machine.
824 prompt "Intel MCE features"
825 depends on X86_MCE && X86_LOCAL_APIC
827 Additional support for intel specific MCE features such as
832 prompt "AMD MCE features"
833 depends on X86_MCE && X86_LOCAL_APIC
835 Additional support for AMD specific MCE features such as
836 the DRAM Error Threshold.
838 config X86_ANCIENT_MCE
840 depends on X86_32 && X86_MCE
841 prompt "Support for old Pentium 5 / WinChip machine checks"
843 Include support for machine check handling on old Pentium 5 or WinChip
844 systems. These typically need to be enabled explicitely on the command
847 config X86_MCE_THRESHOLD
848 depends on X86_MCE_AMD || X86_MCE_INTEL
852 config X86_MCE_INJECT
854 tristate "Machine check injector support"
856 Provide support for injecting machine checks for testing purposes.
857 If you don't know what a machine check is and you don't do kernel
858 QA it is safe to say n.
860 config X86_THERMAL_VECTOR
862 depends on X86_MCE_INTEL
865 bool "Enable VM86 support" if EMBEDDED
869 This option is required by programs like DOSEMU to run 16-bit legacy
870 code on X86 processors. It also may be needed by software like
871 XFree86 to initialize some video cards via BIOS. Disabling this
872 option saves about 6k.
875 tristate "Toshiba Laptop support"
878 This adds a driver to safely access the System Management Mode of
879 the CPU on Toshiba portables with a genuine Toshiba BIOS. It does
880 not work on models with a Phoenix BIOS. The System Management Mode
881 is used to set the BIOS and power saving options on Toshiba portables.
883 For information on utilities to make use of this driver see the
884 Toshiba Linux utilities web site at:
885 <http://www.buzzard.org.uk/toshiba/>.
887 Say Y if you intend to run this kernel on a Toshiba portable.
891 tristate "Dell laptop support"
893 This adds a driver to safely access the System Management Mode
894 of the CPU on the Dell Inspiron 8000. The System Management Mode
895 is used to read cpu temperature and cooling fan status and to
896 control the fans on the I8K portables.
898 This driver has been tested only on the Inspiron 8000 but it may
899 also work with other Dell laptops. You can force loading on other
900 models by passing the parameter `force=1' to the module. Use at
903 For information on utilities to make use of this driver see the
904 I8K Linux utilities web site at:
905 <http://people.debian.org/~dz/i8k/>
907 Say Y if you intend to run this kernel on a Dell Inspiron 8000.
910 config X86_REBOOTFIXUPS
911 bool "Enable X86 board specific fixups for reboot"
914 This enables chipset and/or board specific fixups to be done
915 in order to get reboot to work correctly. This is only needed on
916 some combinations of hardware and BIOS. The symptom, for which
917 this config is intended, is when reboot ends with a stalled/hung
920 Currently, the only fixup is for the Geode machines using
921 CS5530A and CS5536 chipsets and the RDC R-321x SoC.
923 Say Y if you want to enable the fixup. Currently, it's safe to
924 enable this option even if you don't need it.
928 tristate "/dev/cpu/microcode - microcode support"
931 If you say Y here, you will be able to update the microcode on
932 certain Intel and AMD processors. The Intel support is for the
933 IA32 family, e.g. Pentium Pro, Pentium II, Pentium III,
934 Pentium 4, Xeon etc. The AMD support is for family 0x10 and
935 0x11 processors, e.g. Opteron, Phenom and Turion 64 Ultra.
936 You will obviously need the actual microcode binary data itself
937 which is not shipped with the Linux kernel.
939 This option selects the general module only, you need to select
940 at least one vendor specific module as well.
942 To compile this driver as a module, choose M here: the
943 module will be called microcode.
945 config MICROCODE_INTEL
946 bool "Intel microcode patch loading support"
951 This options enables microcode patch loading support for Intel
954 For latest news and information on obtaining all the required
955 Intel ingredients for this driver, check:
956 <http://www.urbanmyth.org/microcode/>.
959 bool "AMD microcode patch loading support"
963 If you select this option, microcode patch loading support for AMD
964 processors will be enabled.
966 config MICROCODE_OLD_INTERFACE
971 tristate "/dev/cpu/*/msr - Model-specific register support"
973 This device gives privileged processes access to the x86
974 Model-Specific Registers (MSRs). It is a character device with
975 major 202 and minors 0 to 31 for /dev/cpu/0/msr to /dev/cpu/31/msr.
976 MSR accesses are directed to a specific CPU on multi-processor
980 tristate "/dev/cpu/*/cpuid - CPU information support"
982 This device gives processes access to the x86 CPUID instruction to
983 be executed on a specific processor. It is a character device
984 with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to
988 tristate "/sys/kernel/debug/x86/cpu/* - CPU Debug support"
990 If you select this option, this will provide various x86 CPUs
991 information through debugfs.
994 prompt "High Memory Support"
995 default HIGHMEM4G if !X86_NUMAQ
996 default HIGHMEM64G if X86_NUMAQ
1001 depends on !X86_NUMAQ
1003 Linux can use up to 64 Gigabytes of physical memory on x86 systems.
1004 However, the address space of 32-bit x86 processors is only 4
1005 Gigabytes large. That means that, if you have a large amount of
1006 physical memory, not all of it can be "permanently mapped" by the
1007 kernel. The physical memory that's not permanently mapped is called
1010 If you are compiling a kernel which will never run on a machine with
1011 more than 1 Gigabyte total physical RAM, answer "off" here (default
1012 choice and suitable for most users). This will result in a "3GB/1GB"
1013 split: 3GB are mapped so that each process sees a 3GB virtual memory
1014 space and the remaining part of the 4GB virtual memory space is used
1015 by the kernel to permanently map as much physical memory as
1018 If the machine has between 1 and 4 Gigabytes physical RAM, then
1021 If more than 4 Gigabytes is used then answer "64GB" here. This
1022 selection turns Intel PAE (Physical Address Extension) mode on.
1023 PAE implements 3-level paging on IA32 processors. PAE is fully
1024 supported by Linux, PAE mode is implemented on all recent Intel
1025 processors (Pentium Pro and better). NOTE: If you say "64GB" here,
1026 then the kernel will not boot on CPUs that don't support PAE!
1028 The actual amount of total physical memory will either be
1029 auto detected or can be forced by using a kernel command line option
1030 such as "mem=256M". (Try "man bootparam" or see the documentation of
1031 your boot loader (lilo or loadlin) about how to pass options to the
1032 kernel at boot time.)
1034 If unsure, say "off".
1038 depends on !X86_NUMAQ
1040 Select this if you have a 32-bit processor and between 1 and 4
1041 gigabytes of physical RAM.
1045 depends on !M386 && !M486
1048 Select this if you have a 32-bit processor and more than 4
1049 gigabytes of physical RAM.
1054 depends on EXPERIMENTAL
1055 prompt "Memory split" if EMBEDDED
1059 Select the desired split between kernel and user memory.
1061 If the address range available to the kernel is less than the
1062 physical memory installed, the remaining memory will be available
1063 as "high memory". Accessing high memory is a little more costly
1064 than low memory, as it needs to be mapped into the kernel first.
1065 Note that increasing the kernel address space limits the range
1066 available to user programs, making the address space there
1067 tighter. Selecting anything other than the default 3G/1G split
1068 will also likely make your kernel incompatible with binary-only
1071 If you are not absolutely sure what you are doing, leave this
1075 bool "3G/1G user/kernel split"
1076 config VMSPLIT_3G_OPT
1078 bool "3G/1G user/kernel split (for full 1G low memory)"
1080 bool "2G/2G user/kernel split"
1081 config VMSPLIT_2G_OPT
1083 bool "2G/2G user/kernel split (for full 2G low memory)"
1085 bool "1G/3G user/kernel split"
1090 default 0xB0000000 if VMSPLIT_3G_OPT
1091 default 0x80000000 if VMSPLIT_2G
1092 default 0x78000000 if VMSPLIT_2G_OPT
1093 default 0x40000000 if VMSPLIT_1G
1099 depends on X86_32 && (HIGHMEM64G || HIGHMEM4G)
1102 bool "PAE (Physical Address Extension) Support"
1103 depends on X86_32 && !HIGHMEM4G
1105 PAE is required for NX support, and furthermore enables
1106 larger swapspace support for non-overcommit purposes. It
1107 has the cost of more pagetable lookup overhead, and also
1108 consumes more pagetable space per process.
1110 config ARCH_PHYS_ADDR_T_64BIT
1111 def_bool X86_64 || X86_PAE
1113 config DIRECT_GBPAGES
1114 bool "Enable 1GB pages for kernel pagetables" if EMBEDDED
1118 Allow the kernel linear mapping to use 1GB pages on CPUs that
1119 support it. This can improve the kernel's performance a tiny bit by
1120 reducing TLB pressure. If in doubt, say "Y".
1122 # Common NUMA Features
1124 bool "Numa Memory Allocation and Scheduler Support"
1126 depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI) && EXPERIMENTAL)
1127 default y if (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP)
1129 Enable NUMA (Non Uniform Memory Access) support.
1131 The kernel will try to allocate memory used by a CPU on the
1132 local memory controller of the CPU and add some more
1133 NUMA awareness to the kernel.
1135 For 64-bit this is recommended if the system is Intel Core i7
1136 (or later), AMD Opteron, or EM64T NUMA.
1138 For 32-bit this is only needed on (rare) 32-bit-only platforms
1139 that support NUMA topologies, such as NUMAQ / Summit, or if you
1140 boot a 32-bit kernel on a 64-bit NUMA platform.
1142 Otherwise, you should say N.
1144 comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI"
1145 depends on X86_32 && X86_SUMMIT && (!HIGHMEM64G || !ACPI)
1149 prompt "Old style AMD Opteron NUMA detection"
1150 depends on X86_64 && NUMA && PCI
1152 Enable K8 NUMA node topology detection. You should say Y here if
1153 you have a multi processor AMD K8 system. This uses an old
1154 method to read the NUMA configuration directly from the builtin
1155 Northbridge of Opteron. It is recommended to use X86_64_ACPI_NUMA
1156 instead, which also takes priority if both are compiled in.
1158 config X86_64_ACPI_NUMA
1160 prompt "ACPI NUMA detection"
1161 depends on X86_64 && NUMA && ACPI && PCI
1164 Enable ACPI SRAT based node topology detection.
1166 # Some NUMA nodes have memory ranges that span
1167 # other nodes. Even though a pfn is valid and
1168 # between a node's start and end pfns, it may not
1169 # reside on that node. See memmap_init_zone()
1171 config NODES_SPAN_OTHER_NODES
1173 depends on X86_64_ACPI_NUMA
1176 bool "NUMA emulation"
1177 depends on X86_64 && NUMA
1179 Enable NUMA emulation. A flat machine will be split
1180 into virtual nodes when booted with "numa=fake=N", where N is the
1181 number of nodes. This is only useful for debugging.
1184 int "Maximum NUMA Nodes (as a power of 2)" if !MAXSMP
1186 default "9" if MAXSMP
1187 default "6" if X86_64
1188 default "4" if X86_NUMAQ
1190 depends on NEED_MULTIPLE_NODES
1192 Specify the maximum number of NUMA Nodes available on the target
1193 system. Increases memory reserved to accommodate various tables.
1195 config HAVE_ARCH_BOOTMEM
1197 depends on X86_32 && NUMA
1199 config ARCH_HAVE_MEMORY_PRESENT
1201 depends on X86_32 && DISCONTIGMEM
1203 config NEED_NODE_MEMMAP_SIZE
1205 depends on X86_32 && (DISCONTIGMEM || SPARSEMEM)
1207 config HAVE_ARCH_ALLOC_REMAP
1209 depends on X86_32 && NUMA
1211 config ARCH_FLATMEM_ENABLE
1213 depends on X86_32 && ARCH_SELECT_MEMORY_MODEL && !NUMA
1215 config ARCH_DISCONTIGMEM_ENABLE
1217 depends on NUMA && X86_32
1219 config ARCH_DISCONTIGMEM_DEFAULT
1221 depends on NUMA && X86_32
1223 config ARCH_PROC_KCORE_TEXT
1225 depends on X86_64 && PROC_KCORE
1227 config ARCH_SPARSEMEM_DEFAULT
1231 config ARCH_SPARSEMEM_ENABLE
1233 depends on X86_64 || NUMA || (EXPERIMENTAL && X86_32) || X86_32_NON_STANDARD
1234 select SPARSEMEM_STATIC if X86_32
1235 select SPARSEMEM_VMEMMAP_ENABLE if X86_64
1237 config ARCH_SELECT_MEMORY_MODEL
1239 depends on ARCH_SPARSEMEM_ENABLE
1241 config ARCH_MEMORY_PROBE
1243 depends on MEMORY_HOTPLUG
1248 bool "Allocate 3rd-level pagetables from highmem"
1249 depends on X86_32 && (HIGHMEM4G || HIGHMEM64G)
1251 The VM uses one page table entry for each page of physical memory.
1252 For systems with a lot of RAM, this can be wasteful of precious
1253 low memory. Setting this option will put user-space page table
1254 entries in high memory.
1256 config X86_CHECK_BIOS_CORRUPTION
1257 bool "Check for low memory corruption"
1259 Periodically check for memory corruption in low memory, which
1260 is suspected to be caused by BIOS. Even when enabled in the
1261 configuration, it is disabled at runtime. Enable it by
1262 setting "memory_corruption_check=1" on the kernel command
1263 line. By default it scans the low 64k of memory every 60
1264 seconds; see the memory_corruption_check_size and
1265 memory_corruption_check_period parameters in
1266 Documentation/kernel-parameters.txt to adjust this.
1268 When enabled with the default parameters, this option has
1269 almost no overhead, as it reserves a relatively small amount
1270 of memory and scans it infrequently. It both detects corruption
1271 and prevents it from affecting the running system.
1273 It is, however, intended as a diagnostic tool; if repeatable
1274 BIOS-originated corruption always affects the same memory,
1275 you can use memmap= to prevent the kernel from using that
1278 config X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK
1279 bool "Set the default setting of memory_corruption_check"
1280 depends on X86_CHECK_BIOS_CORRUPTION
1283 Set whether the default state of memory_corruption_check is
1286 config X86_RESERVE_LOW_64K
1287 bool "Reserve low 64K of RAM on AMI/Phoenix BIOSen"
1290 Reserve the first 64K of physical RAM on BIOSes that are known
1291 to potentially corrupt that memory range. A numbers of BIOSes are
1292 known to utilize this area during suspend/resume, so it must not
1293 be used by the kernel.
1295 Set this to N if you are absolutely sure that you trust the BIOS
1296 to get all its memory reservations and usages right.
1298 If you have doubts about the BIOS (e.g. suspend/resume does not
1299 work or there's kernel crashes after certain hardware hotplug
1300 events) and it's not AMI or Phoenix, then you might want to enable
1301 X86_CHECK_BIOS_CORRUPTION=y to allow the kernel to check typical
1302 corruption patterns.
1306 config MATH_EMULATION
1308 prompt "Math emulation" if X86_32
1310 Linux can emulate a math coprocessor (used for floating point
1311 operations) if you don't have one. 486DX and Pentium processors have
1312 a math coprocessor built in, 486SX and 386 do not, unless you added
1313 a 487DX or 387, respectively. (The messages during boot time can
1314 give you some hints here ["man dmesg"].) Everyone needs either a
1315 coprocessor or this emulation.
1317 If you don't have a math coprocessor, you need to say Y here; if you
1318 say Y here even though you have a coprocessor, the coprocessor will
1319 be used nevertheless. (This behavior can be changed with the kernel
1320 command line option "no387", which comes handy if your coprocessor
1321 is broken. Try "man bootparam" or see the documentation of your boot
1322 loader (lilo or loadlin) about how to pass options to the kernel at
1323 boot time.) This means that it is a good idea to say Y here if you
1324 intend to use this kernel on different machines.
1326 More information about the internals of the Linux math coprocessor
1327 emulation can be found in <file:arch/x86/math-emu/README>.
1329 If you are not sure, say Y; apart from resulting in a 66 KB bigger
1330 kernel, it won't hurt.
1333 bool "MTRR (Memory Type Range Register) support"
1335 On Intel P6 family processors (Pentium Pro, Pentium II and later)
1336 the Memory Type Range Registers (MTRRs) may be used to control
1337 processor access to memory ranges. This is most useful if you have
1338 a video (VGA) card on a PCI or AGP bus. Enabling write-combining
1339 allows bus write transfers to be combined into a larger transfer
1340 before bursting over the PCI/AGP bus. This can increase performance
1341 of image write operations 2.5 times or more. Saying Y here creates a
1342 /proc/mtrr file which may be used to manipulate your processor's
1343 MTRRs. Typically the X server should use this.
1345 This code has a reasonably generic interface so that similar
1346 control registers on other processors can be easily supported
1349 The Cyrix 6x86, 6x86MX and M II processors have Address Range
1350 Registers (ARRs) which provide a similar functionality to MTRRs. For
1351 these, the ARRs are used to emulate the MTRRs.
1352 The AMD K6-2 (stepping 8 and above) and K6-3 processors have two
1353 MTRRs. The Centaur C6 (WinChip) has 8 MCRs, allowing
1354 write-combining. All of these processors are supported by this code
1355 and it makes sense to say Y here if you have one of them.
1357 Saying Y here also fixes a problem with buggy SMP BIOSes which only
1358 set the MTRRs for the boot CPU and not for the secondary CPUs. This
1359 can lead to all sorts of problems, so it's good to say Y here.
1361 You can safely say Y even if your machine doesn't have MTRRs, you'll
1362 just add about 9 KB to your kernel.
1364 See <file:Documentation/x86/mtrr.txt> for more information.
1366 config MTRR_SANITIZER
1368 prompt "MTRR cleanup support"
1371 Convert MTRR layout from continuous to discrete, so X drivers can
1372 add writeback entries.
1374 Can be disabled with disable_mtrr_cleanup on the kernel command line.
1375 The largest mtrr entry size for a continuous block can be set with
1380 config MTRR_SANITIZER_ENABLE_DEFAULT
1381 int "MTRR cleanup enable value (0-1)"
1384 depends on MTRR_SANITIZER
1386 Enable mtrr cleanup default value
1388 config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT
1389 int "MTRR cleanup spare reg num (0-7)"
1392 depends on MTRR_SANITIZER
1394 mtrr cleanup spare entries default, it can be changed via
1395 mtrr_spare_reg_nr=N on the kernel command line.
1399 prompt "x86 PAT support"
1402 Use PAT attributes to setup page level cache control.
1404 PATs are the modern equivalents of MTRRs and are much more
1405 flexible than MTRRs.
1407 Say N here if you see bootup problems (boot crash, boot hang,
1408 spontaneous reboots) or a non-working video driver.
1412 config ARCH_USES_PG_UNCACHED
1417 bool "EFI runtime service support"
1420 This enables the kernel to use EFI runtime services that are
1421 available (such as the EFI variable services).
1423 This option is only useful on systems that have EFI firmware.
1424 In addition, you should use the latest ELILO loader available
1425 at <http://elilo.sourceforge.net> in order to take advantage
1426 of EFI runtime services. However, even with this option, the
1427 resultant kernel should continue to boot on existing non-EFI
1432 prompt "Enable seccomp to safely compute untrusted bytecode"
1434 This kernel feature is useful for number crunching applications
1435 that may need to compute untrusted bytecode during their
1436 execution. By using pipes or other transports made available to
1437 the process as file descriptors supporting the read/write
1438 syscalls, it's possible to isolate those applications in
1439 their own address space using seccomp. Once seccomp is
1440 enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
1441 and the task is only allowed to execute a few safe syscalls
1442 defined by each seccomp mode.
1444 If unsure, say Y. Only embedded should say N here.
1446 config CC_STACKPROTECTOR_ALL
1449 config CC_STACKPROTECTOR
1450 bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
1451 select CC_STACKPROTECTOR_ALL
1453 This option turns on the -fstack-protector GCC feature. This
1454 feature puts, at the beginning of functions, a canary value on
1455 the stack just before the return address, and validates
1456 the value just before actually returning. Stack based buffer
1457 overflows (that need to overwrite this return address) now also
1458 overwrite the canary, which gets detected and the attack is then
1459 neutralized via a kernel panic.
1461 This feature requires gcc version 4.2 or above, or a distribution
1462 gcc with the feature backported. Older versions are automatically
1463 detected and for those versions, this configuration option is
1464 ignored. (and a warning is printed during bootup)
1466 source kernel/Kconfig.hz
1469 bool "kexec system call"
1471 kexec is a system call that implements the ability to shutdown your
1472 current kernel, and to start another kernel. It is like a reboot
1473 but it is independent of the system firmware. And like a reboot
1474 you can start any kernel with it, not just Linux.
1476 The name comes from the similarity to the exec system call.
1478 It is an ongoing process to be certain the hardware in a machine
1479 is properly shutdown, so do not be surprised if this code does not
1480 initially work for you. It may help to enable device hotplugging
1481 support. As of this writing the exact hardware interface is
1482 strongly in flux, so no good recommendation can be made.
1485 bool "kernel crash dumps"
1486 depends on X86_64 || (X86_32 && HIGHMEM)
1488 Generate crash dump after being started by kexec.
1489 This should be normally only set in special crash dump kernels
1490 which are loaded in the main kernel with kexec-tools into
1491 a specially reserved region and then later executed after
1492 a crash by kdump/kexec. The crash dump kernel must be compiled
1493 to a memory address not used by the main kernel or BIOS using
1494 PHYSICAL_START, or it must be built as a relocatable image
1495 (CONFIG_RELOCATABLE=y).
1496 For more details see Documentation/kdump/kdump.txt
1499 bool "kexec jump (EXPERIMENTAL)"
1500 depends on EXPERIMENTAL
1501 depends on KEXEC && HIBERNATION
1503 Jump between original kernel and kexeced kernel and invoke
1504 code in physical address mode via KEXEC
1506 config PHYSICAL_START
1507 hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
1510 This gives the physical address where the kernel is loaded.
1512 If kernel is a not relocatable (CONFIG_RELOCATABLE=n) then
1513 bzImage will decompress itself to above physical address and
1514 run from there. Otherwise, bzImage will run from the address where
1515 it has been loaded by the boot loader and will ignore above physical
1518 In normal kdump cases one does not have to set/change this option
1519 as now bzImage can be compiled as a completely relocatable image
1520 (CONFIG_RELOCATABLE=y) and be used to load and run from a different
1521 address. This option is mainly useful for the folks who don't want
1522 to use a bzImage for capturing the crash dump and want to use a
1523 vmlinux instead. vmlinux is not relocatable hence a kernel needs
1524 to be specifically compiled to run from a specific memory area
1525 (normally a reserved region) and this option comes handy.
1527 So if you are using bzImage for capturing the crash dump,
1528 leave the value here unchanged to 0x1000000 and set
1529 CONFIG_RELOCATABLE=y. Otherwise if you plan to use vmlinux
1530 for capturing the crash dump change this value to start of
1531 the reserved region. In other words, it can be set based on
1532 the "X" value as specified in the "crashkernel=YM@XM"
1533 command line boot parameter passed to the panic-ed
1534 kernel. Please take a look at Documentation/kdump/kdump.txt
1535 for more details about crash dumps.
1537 Usage of bzImage for capturing the crash dump is recommended as
1538 one does not have to build two kernels. Same kernel can be used
1539 as production kernel and capture kernel. Above option should have
1540 gone away after relocatable bzImage support is introduced. But it
1541 is present because there are users out there who continue to use
1542 vmlinux for dump capture. This option should go away down the
1545 Don't change this unless you know what you are doing.
1548 bool "Build a relocatable kernel"
1551 This builds a kernel image that retains relocation information
1552 so it can be loaded someplace besides the default 1MB.
1553 The relocations tend to make the kernel binary about 10% larger,
1554 but are discarded at runtime.
1556 One use is for the kexec on panic case where the recovery kernel
1557 must live at a different physical address than the primary
1560 Note: If CONFIG_RELOCATABLE=y, then the kernel runs from the address
1561 it has been loaded at and the compile time physical address
1562 (CONFIG_PHYSICAL_START) is ignored.
1564 # Relocation on x86-32 needs some additional build support
1565 config X86_NEED_RELOCS
1567 depends on X86_32 && RELOCATABLE
1569 config PHYSICAL_ALIGN
1571 prompt "Alignment value to which kernel should be aligned" if X86_32
1573 range 0x2000 0x1000000
1575 This value puts the alignment restrictions on physical address
1576 where kernel is loaded and run from. Kernel is compiled for an
1577 address which meets above alignment restriction.
1579 If bootloader loads the kernel at a non-aligned address and
1580 CONFIG_RELOCATABLE is set, kernel will move itself to nearest
1581 address aligned to above value and run from there.
1583 If bootloader loads the kernel at a non-aligned address and
1584 CONFIG_RELOCATABLE is not set, kernel will ignore the run time
1585 load address and decompress itself to the address it has been
1586 compiled for and run from there. The address for which kernel is
1587 compiled already meets above alignment restrictions. Hence the
1588 end result is that kernel runs from a physical address meeting
1589 above alignment restrictions.
1591 Don't change this unless you know what you are doing.
1594 bool "Support for hot-pluggable CPUs"
1595 depends on SMP && HOTPLUG
1597 Say Y here to allow turning CPUs off and on. CPUs can be
1598 controlled through /sys/devices/system/cpu.
1599 ( Note: power management support will enable this option
1600 automatically on SMP systems. )
1601 Say N if you want to disable CPU hotplug.
1605 prompt "Compat VDSO support"
1606 depends on X86_32 || IA32_EMULATION
1608 Map the 32-bit VDSO to the predictable old-style address too.
1610 Say N here if you are running a sufficiently recent glibc
1611 version (2.3.3 or later), to remove the high-mapped
1612 VDSO mapping and to exclusively use the randomized VDSO.
1617 bool "Built-in kernel command line"
1620 Allow for specifying boot arguments to the kernel at
1621 build time. On some systems (e.g. embedded ones), it is
1622 necessary or convenient to provide some or all of the
1623 kernel boot arguments with the kernel itself (that is,
1624 to not rely on the boot loader to provide them.)
1626 To compile command line arguments into the kernel,
1627 set this option to 'Y', then fill in the
1628 the boot arguments in CONFIG_CMDLINE.
1630 Systems with fully functional boot loaders (i.e. non-embedded)
1631 should leave this option set to 'N'.
1634 string "Built-in kernel command string"
1635 depends on CMDLINE_BOOL
1638 Enter arguments here that should be compiled into the kernel
1639 image and used at boot time. If the boot loader provides a
1640 command line at boot time, it is appended to this string to
1641 form the full kernel command line, when the system boots.
1643 However, you can use the CONFIG_CMDLINE_OVERRIDE option to
1644 change this behavior.
1646 In most cases, the command line (whether built-in or provided
1647 by the boot loader) should specify the device for the root
1650 config CMDLINE_OVERRIDE
1651 bool "Built-in command line overrides boot loader arguments"
1653 depends on CMDLINE_BOOL
1655 Set this option to 'Y' to have the kernel ignore the boot loader
1656 command line, and use ONLY the built-in command line.
1658 This is used to work around broken boot loaders. This should
1659 be set to 'N' under normal conditions.
1663 config ARCH_ENABLE_MEMORY_HOTPLUG
1665 depends on X86_64 || (X86_32 && HIGHMEM)
1667 config ARCH_ENABLE_MEMORY_HOTREMOVE
1669 depends on MEMORY_HOTPLUG
1671 config HAVE_ARCH_EARLY_PFN_TO_NID
1675 menu "Power management and ACPI options"
1677 config ARCH_HIBERNATION_HEADER
1679 depends on X86_64 && HIBERNATION
1681 source "kernel/power/Kconfig"
1683 source "drivers/acpi/Kconfig"
1685 source "drivers/sfi/Kconfig"
1690 depends on APM || APM_MODULE
1693 tristate "APM (Advanced Power Management) BIOS support"
1694 depends on X86_32 && PM_SLEEP
1696 APM is a BIOS specification for saving power using several different
1697 techniques. This is mostly useful for battery powered laptops with
1698 APM compliant BIOSes. If you say Y here, the system time will be
1699 reset after a RESUME operation, the /proc/apm device will provide
1700 battery status information, and user-space programs will receive
1701 notification of APM "events" (e.g. battery status change).
1703 If you select "Y" here, you can disable actual use of the APM
1704 BIOS by passing the "apm=off" option to the kernel at boot time.
1706 Note that the APM support is almost completely disabled for
1707 machines with more than one CPU.
1709 In order to use APM, you will need supporting software. For location
1710 and more information, read <file:Documentation/power/pm.txt> and the
1711 Battery Powered Linux mini-HOWTO, available from
1712 <http://www.tldp.org/docs.html#howto>.
1714 This driver does not spin down disk drives (see the hdparm(8)
1715 manpage ("man 8 hdparm") for that), and it doesn't turn off
1716 VESA-compliant "green" monitors.
1718 This driver does not support the TI 4000M TravelMate and the ACER
1719 486/DX4/75 because they don't have compliant BIOSes. Many "green"
1720 desktop machines also don't have compliant BIOSes, and this driver
1721 may cause those machines to panic during the boot phase.
1723 Generally, if you don't have a battery in your machine, there isn't
1724 much point in using this driver and you should say N. If you get
1725 random kernel OOPSes or reboots that don't seem to be related to
1726 anything, try disabling/enabling this option (or disabling/enabling
1729 Some other things you should try when experiencing seemingly random,
1732 1) make sure that you have enough swap space and that it is
1734 2) pass the "no-hlt" option to the kernel
1735 3) switch on floating point emulation in the kernel and pass
1736 the "no387" option to the kernel
1737 4) pass the "floppy=nodma" option to the kernel
1738 5) pass the "mem=4M" option to the kernel (thereby disabling
1739 all but the first 4 MB of RAM)
1740 6) make sure that the CPU is not over clocked.
1741 7) read the sig11 FAQ at <http://www.bitwizard.nl/sig11/>
1742 8) disable the cache from your BIOS settings
1743 9) install a fan for the video card or exchange video RAM
1744 10) install a better fan for the CPU
1745 11) exchange RAM chips
1746 12) exchange the motherboard.
1748 To compile this driver as a module, choose M here: the
1749 module will be called apm.
1753 config APM_IGNORE_USER_SUSPEND
1754 bool "Ignore USER SUSPEND"
1756 This option will ignore USER SUSPEND requests. On machines with a
1757 compliant APM BIOS, you want to say N. However, on the NEC Versa M
1758 series notebooks, it is necessary to say Y because of a BIOS bug.
1760 config APM_DO_ENABLE
1761 bool "Enable PM at boot time"
1763 Enable APM features at boot time. From page 36 of the APM BIOS
1764 specification: "When disabled, the APM BIOS does not automatically
1765 power manage devices, enter the Standby State, enter the Suspend
1766 State, or take power saving steps in response to CPU Idle calls."
1767 This driver will make CPU Idle calls when Linux is idle (unless this
1768 feature is turned off -- see "Do CPU IDLE calls", below). This
1769 should always save battery power, but more complicated APM features
1770 will be dependent on your BIOS implementation. You may need to turn
1771 this option off if your computer hangs at boot time when using APM
1772 support, or if it beeps continuously instead of suspending. Turn
1773 this off if you have a NEC UltraLite Versa 33/C or a Toshiba
1774 T400CDT. This is off by default since most machines do fine without
1778 bool "Make CPU Idle calls when idle"
1780 Enable calls to APM CPU Idle/CPU Busy inside the kernel's idle loop.
1781 On some machines, this can activate improved power savings, such as
1782 a slowed CPU clock rate, when the machine is idle. These idle calls
1783 are made after the idle loop has run for some length of time (e.g.,
1784 333 mS). On some machines, this will cause a hang at boot time or
1785 whenever the CPU becomes idle. (On machines with more than one CPU,
1786 this option does nothing.)
1788 config APM_DISPLAY_BLANK
1789 bool "Enable console blanking using APM"
1791 Enable console blanking using the APM. Some laptops can use this to
1792 turn off the LCD backlight when the screen blanker of the Linux
1793 virtual console blanks the screen. Note that this is only used by
1794 the virtual console screen blanker, and won't turn off the backlight
1795 when using the X Window system. This also doesn't have anything to
1796 do with your VESA-compliant power-saving monitor. Further, this
1797 option doesn't work for all laptops -- it might not turn off your
1798 backlight at all, or it might print a lot of errors to the console,
1799 especially if you are using gpm.
1801 config APM_ALLOW_INTS
1802 bool "Allow interrupts during APM BIOS calls"
1804 Normally we disable external interrupts while we are making calls to
1805 the APM BIOS as a measure to lessen the effects of a badly behaving
1806 BIOS implementation. The BIOS should reenable interrupts if it
1807 needs to. Unfortunately, some BIOSes do not -- especially those in
1808 many of the newer IBM Thinkpads. If you experience hangs when you
1809 suspend, try setting this to Y. Otherwise, say N.
1813 source "arch/x86/kernel/cpu/cpufreq/Kconfig"
1815 source "drivers/cpuidle/Kconfig"
1817 source "drivers/idle/Kconfig"
1822 menu "Bus options (PCI etc.)"
1827 select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC)
1829 Find out whether you have a PCI motherboard. PCI is the name of a
1830 bus system, i.e. the way the CPU talks to the other stuff inside
1831 your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
1832 VESA. If you have PCI, say Y, otherwise N.
1835 prompt "PCI access mode"
1836 depends on X86_32 && PCI
1839 On PCI systems, the BIOS can be used to detect the PCI devices and
1840 determine their configuration. However, some old PCI motherboards
1841 have BIOS bugs and may crash if this is done. Also, some embedded
1842 PCI-based systems don't have any BIOS at all. Linux can also try to
1843 detect the PCI hardware directly without using the BIOS.
1845 With this option, you can specify how Linux should detect the
1846 PCI devices. If you choose "BIOS", the BIOS will be used,
1847 if you choose "Direct", the BIOS won't be used, and if you
1848 choose "MMConfig", then PCI Express MMCONFIG will be used.
1849 If you choose "Any", the kernel will try MMCONFIG, then the
1850 direct access method and falls back to the BIOS if that doesn't
1851 work. If unsure, go with the default, which is "Any".
1856 config PCI_GOMMCONFIG
1873 depends on X86_32 && PCI && (PCI_GOBIOS || PCI_GOANY)
1875 # x86-64 doesn't support PCI BIOS access from long mode so always go direct.
1878 depends on PCI && (X86_64 || (PCI_GODIRECT || PCI_GOANY || PCI_GOOLPC))
1882 depends on X86_32 && PCI && (ACPI || SFI) && (PCI_GOMMCONFIG || PCI_GOANY)
1886 depends on PCI && OLPC && (PCI_GOOLPC || PCI_GOANY)
1893 bool "Support mmconfig PCI config space access"
1894 depends on X86_64 && PCI && ACPI
1897 bool "Support for DMA Remapping Devices (EXPERIMENTAL)"
1898 depends on PCI_MSI && ACPI && EXPERIMENTAL
1900 DMA remapping (DMAR) devices support enables independent address
1901 translations for Direct Memory Access (DMA) from devices.
1902 These DMA remapping devices are reported via ACPI tables
1903 and include PCI device scope covered by these DMA
1906 config DMAR_DEFAULT_ON
1908 prompt "Enable DMA Remapping Devices by default"
1911 Selecting this option will enable a DMAR device at boot time if
1912 one is found. If this option is not selected, DMAR support can
1913 be enabled by passing intel_iommu=on to the kernel. It is
1914 recommended you say N here while the DMAR code remains
1917 config DMAR_BROKEN_GFX_WA
1919 prompt "Workaround broken graphics drivers (going away soon)"
1920 depends on DMAR && BROKEN
1922 Current Graphics drivers tend to use physical address
1923 for DMA and avoid using DMA APIs. Setting this config
1924 option permits the IOMMU driver to set a unity map for
1925 all the OS-visible memory. Hence the driver can continue
1926 to use physical addresses for DMA, at least until this
1927 option is removed in the 2.6.32 kernel.
1929 config DMAR_FLOPPY_WA
1933 Floppy disk drivers are known to bypass DMA API calls
1934 thereby failing to work when IOMMU is enabled. This
1935 workaround will setup a 1:1 mapping for the first
1936 16MiB to make floppy (an ISA device) work.
1939 bool "Support for Interrupt Remapping (EXPERIMENTAL)"
1940 depends on X86_64 && X86_IO_APIC && PCI_MSI && ACPI && EXPERIMENTAL
1942 Supports Interrupt remapping for IO-APIC and MSI devices.
1943 To use x2apic mode in the CPU's which support x2APIC enhancements or
1944 to support platforms with CPU's having > 8 bit APIC ID, say Y.
1946 source "drivers/pci/pcie/Kconfig"
1948 source "drivers/pci/Kconfig"
1950 # x86_64 have no ISA slots, but do have ISA-style DMA.
1959 Find out whether you have ISA slots on your motherboard. ISA is the
1960 name of a bus system, i.e. the way the CPU talks to the other stuff
1961 inside your box. Other bus systems are PCI, EISA, MicroChannel
1962 (MCA) or VESA. ISA is an older system, now being displaced by PCI;
1963 newer boards don't support it. If you have ISA, say Y, otherwise N.
1969 The Extended Industry Standard Architecture (EISA) bus was
1970 developed as an open alternative to the IBM MicroChannel bus.
1972 The EISA bus provided some of the features of the IBM MicroChannel
1973 bus while maintaining backward compatibility with cards made for
1974 the older ISA bus. The EISA bus saw limited use between 1988 and
1975 1995 when it was made obsolete by the PCI bus.
1977 Say Y here if you are building a kernel for an EISA-based machine.
1981 source "drivers/eisa/Kconfig"
1986 MicroChannel Architecture is found in some IBM PS/2 machines and
1987 laptops. It is a bus system similar to PCI or ISA. See
1988 <file:Documentation/mca.txt> (and especially the web page given
1989 there) before attempting to build an MCA bus kernel.
1991 source "drivers/mca/Kconfig"
1994 tristate "NatSemi SCx200 support"
1996 This provides basic support for National Semiconductor's
1997 (now AMD's) Geode processors. The driver probes for the
1998 PCI-IDs of several on-chip devices, so its a good dependency
1999 for other scx200_* drivers.
2001 If compiled as a module, the driver is named scx200.
2003 config SCx200HR_TIMER
2004 tristate "NatSemi SCx200 27MHz High-Resolution Timer Support"
2005 depends on SCx200 && GENERIC_TIME
2008 This driver provides a clocksource built upon the on-chip
2009 27MHz high-resolution timer. Its also a workaround for
2010 NSC Geode SC-1100's buggy TSC, which loses time when the
2011 processor goes idle (as is done by the scheduler). The
2012 other workaround is idle=poll boot option.
2014 config GEODE_MFGPT_TIMER
2016 prompt "Geode Multi-Function General Purpose Timer (MFGPT) events"
2017 depends on MGEODE_LX && GENERIC_TIME && GENERIC_CLOCKEVENTS
2019 This driver provides a clock event source based on the MFGPT
2020 timer(s) in the CS5535 and CS5536 companion chip for the geode.
2021 MFGPTs have a better resolution and max interval than the
2022 generic PIT, and are suitable for use as high-res timers.
2025 bool "One Laptop Per Child support"
2028 Add support for detecting the unique features of the OLPC
2035 depends on AGP_AMD64 || (X86_64 && (GART_IOMMU || (PCI && NUMA)))
2037 source "drivers/pcmcia/Kconfig"
2039 source "drivers/pci/hotplug/Kconfig"
2044 menu "Executable file formats / Emulations"
2046 source "fs/Kconfig.binfmt"
2048 config IA32_EMULATION
2049 bool "IA32 Emulation"
2051 select COMPAT_BINFMT_ELF
2053 Include code to run 32-bit programs under a 64-bit kernel. You should
2054 likely turn this on, unless you're 100% sure that you don't have any
2055 32-bit programs left.
2058 tristate "IA32 a.out support"
2059 depends on IA32_EMULATION
2061 Support old a.out binaries in the 32bit emulation.
2065 depends on IA32_EMULATION
2067 config COMPAT_FOR_U64_ALIGNMENT
2071 config SYSVIPC_COMPAT
2073 depends on COMPAT && SYSVIPC
2078 config HAVE_ATOMIC_IOMAP
2082 source "net/Kconfig"
2084 source "drivers/Kconfig"
2086 source "drivers/firmware/Kconfig"
2090 source "arch/x86/Kconfig.debug"
2092 source "security/Kconfig"
2094 source "crypto/Kconfig"
2096 source "arch/x86/kvm/Kconfig"
2098 source "lib/Kconfig"