First Support on Ginger and OMAP TI
[linux-ginger.git] / arch / x86 / include / asm / pgtable-3level.h
blob177b0165ea01fa8aeeb1f8749252d422de52b3a6
1 #ifndef _ASM_X86_PGTABLE_3LEVEL_H
2 #define _ASM_X86_PGTABLE_3LEVEL_H
4 /*
5 * Intel Physical Address Extension (PAE) Mode - three-level page
6 * tables on PPro+ CPUs.
8 * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
9 */
11 #define pte_ERROR(e) \
12 printk("%s:%d: bad pte %p(%08lx%08lx).\n", \
13 __FILE__, __LINE__, &(e), (e).pte_high, (e).pte_low)
14 #define pmd_ERROR(e) \
15 printk("%s:%d: bad pmd %p(%016Lx).\n", \
16 __FILE__, __LINE__, &(e), pmd_val(e))
17 #define pgd_ERROR(e) \
18 printk("%s:%d: bad pgd %p(%016Lx).\n", \
19 __FILE__, __LINE__, &(e), pgd_val(e))
21 /* Rules for using set_pte: the pte being assigned *must* be
22 * either not present or in a state where the hardware will
23 * not attempt to update the pte. In places where this is
24 * not possible, use pte_get_and_clear to obtain the old pte
25 * value and then use set_pte to update it. -ben
27 static inline void native_set_pte(pte_t *ptep, pte_t pte)
29 ptep->pte_high = pte.pte_high;
30 smp_wmb();
31 ptep->pte_low = pte.pte_low;
34 static inline void native_set_pte_atomic(pte_t *ptep, pte_t pte)
36 set_64bit((unsigned long long *)(ptep), native_pte_val(pte));
39 static inline void native_set_pmd(pmd_t *pmdp, pmd_t pmd)
41 set_64bit((unsigned long long *)(pmdp), native_pmd_val(pmd));
44 static inline void native_set_pud(pud_t *pudp, pud_t pud)
46 set_64bit((unsigned long long *)(pudp), native_pud_val(pud));
50 * For PTEs and PDEs, we must clear the P-bit first when clearing a page table
51 * entry, so clear the bottom half first and enforce ordering with a compiler
52 * barrier.
54 static inline void native_pte_clear(struct mm_struct *mm, unsigned long addr,
55 pte_t *ptep)
57 ptep->pte_low = 0;
58 smp_wmb();
59 ptep->pte_high = 0;
62 static inline void native_pmd_clear(pmd_t *pmd)
64 u32 *tmp = (u32 *)pmd;
65 *tmp = 0;
66 smp_wmb();
67 *(tmp + 1) = 0;
70 static inline void pud_clear(pud_t *pudp)
72 unsigned long pgd;
74 set_pud(pudp, __pud(0));
77 * According to Intel App note "TLBs, Paging-Structure Caches,
78 * and Their Invalidation", April 2007, document 317080-001,
79 * section 8.1: in PAE mode we explicitly have to flush the
80 * TLB via cr3 if the top-level pgd is changed...
82 * Make sure the pud entry we're updating is within the
83 * current pgd to avoid unnecessary TLB flushes.
85 pgd = read_cr3();
86 if (__pa(pudp) >= pgd && __pa(pudp) <
87 (pgd + sizeof(pgd_t)*PTRS_PER_PGD))
88 write_cr3(pgd);
91 #ifdef CONFIG_SMP
92 static inline pte_t native_ptep_get_and_clear(pte_t *ptep)
94 pte_t res;
96 /* xchg acts as a barrier before the setting of the high bits */
97 res.pte_low = xchg(&ptep->pte_low, 0);
98 res.pte_high = ptep->pte_high;
99 ptep->pte_high = 0;
101 return res;
103 #else
104 #define native_ptep_get_and_clear(xp) native_local_ptep_get_and_clear(xp)
105 #endif
108 * Bits 0, 6 and 7 are taken in the low part of the pte,
109 * put the 32 bits of offset into the high part.
111 #define pte_to_pgoff(pte) ((pte).pte_high)
112 #define pgoff_to_pte(off) \
113 ((pte_t) { { .pte_low = _PAGE_FILE, .pte_high = (off) } })
114 #define PTE_FILE_MAX_BITS 32
116 /* Encode and de-code a swap entry */
117 #define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > 5)
118 #define __swp_type(x) (((x).val) & 0x1f)
119 #define __swp_offset(x) ((x).val >> 5)
120 #define __swp_entry(type, offset) ((swp_entry_t){(type) | (offset) << 5})
121 #define __pte_to_swp_entry(pte) ((swp_entry_t){ (pte).pte_high })
122 #define __swp_entry_to_pte(x) ((pte_t){ { .pte_high = (x).val } })
124 #endif /* _ASM_X86_PGTABLE_3LEVEL_H */