First Support on Ginger and OMAP TI
[linux-ginger.git] / drivers / block / paride / pd.c
blob569e39e8f1143fd4c896344fa25e3e653f8e6a89
1 /*
2 pd.c (c) 1997-8 Grant R. Guenther <grant@torque.net>
3 Under the terms of the GNU General Public License.
5 This is the high-level driver for parallel port IDE hard
6 drives based on chips supported by the paride module.
8 By default, the driver will autoprobe for a single parallel
9 port IDE drive, but if their individual parameters are
10 specified, the driver can handle up to 4 drives.
12 The behaviour of the pd driver can be altered by setting
13 some parameters from the insmod command line. The following
14 parameters are adjustable:
16 drive0 These four arguments can be arrays of
17 drive1 1-8 integers as follows:
18 drive2
19 drive3 <prt>,<pro>,<uni>,<mod>,<geo>,<sby>,<dly>,<slv>
21 Where,
23 <prt> is the base of the parallel port address for
24 the corresponding drive. (required)
26 <pro> is the protocol number for the adapter that
27 supports this drive. These numbers are
28 logged by 'paride' when the protocol modules
29 are initialised. (0 if not given)
31 <uni> for those adapters that support chained
32 devices, this is the unit selector for the
33 chain of devices on the given port. It should
34 be zero for devices that don't support chaining.
35 (0 if not given)
37 <mod> this can be -1 to choose the best mode, or one
38 of the mode numbers supported by the adapter.
39 (-1 if not given)
41 <geo> this defaults to 0 to indicate that the driver
42 should use the CHS geometry provided by the drive
43 itself. If set to 1, the driver will provide
44 a logical geometry with 64 heads and 32 sectors
45 per track, to be consistent with most SCSI
46 drivers. (0 if not given)
48 <sby> set this to zero to disable the power saving
49 standby mode, if needed. (1 if not given)
51 <dly> some parallel ports require the driver to
52 go more slowly. -1 sets a default value that
53 should work with the chosen protocol. Otherwise,
54 set this to a small integer, the larger it is
55 the slower the port i/o. In some cases, setting
56 this to zero will speed up the device. (default -1)
58 <slv> IDE disks can be jumpered to master or slave.
59 Set this to 0 to choose the master drive, 1 to
60 choose the slave, -1 (the default) to choose the
61 first drive found.
64 major You may use this parameter to overide the
65 default major number (45) that this driver
66 will use. Be sure to change the device
67 name as well.
69 name This parameter is a character string that
70 contains the name the kernel will use for this
71 device (in /proc output, for instance).
72 (default "pd")
74 cluster The driver will attempt to aggregate requests
75 for adjacent blocks into larger multi-block
76 clusters. The maximum cluster size (in 512
77 byte sectors) is set with this parameter.
78 (default 64)
80 verbose This parameter controls the amount of logging
81 that the driver will do. Set it to 0 for
82 normal operation, 1 to see autoprobe progress
83 messages, or 2 to see additional debugging
84 output. (default 0)
86 nice This parameter controls the driver's use of
87 idle CPU time, at the expense of some speed.
89 If this driver is built into the kernel, you can use kernel
90 the following command line parameters, with the same values
91 as the corresponding module parameters listed above:
93 pd.drive0
94 pd.drive1
95 pd.drive2
96 pd.drive3
97 pd.cluster
98 pd.nice
100 In addition, you can use the parameter pd.disable to disable
101 the driver entirely.
105 /* Changes:
107 1.01 GRG 1997.01.24 Restored pd_reset()
108 Added eject ioctl
109 1.02 GRG 1998.05.06 SMP spinlock changes,
110 Added slave support
111 1.03 GRG 1998.06.16 Eliminate an Ugh.
112 1.04 GRG 1998.08.15 Extra debugging, use HZ in loop timing
113 1.05 GRG 1998.09.24 Added jumbo support
117 #define PD_VERSION "1.05"
118 #define PD_MAJOR 45
119 #define PD_NAME "pd"
120 #define PD_UNITS 4
122 /* Here are things one can override from the insmod command.
123 Most are autoprobed by paride unless set here. Verbose is off
124 by default.
128 static int verbose = 0;
129 static int major = PD_MAJOR;
130 static char *name = PD_NAME;
131 static int cluster = 64;
132 static int nice = 0;
133 static int disable = 0;
135 static int drive0[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
136 static int drive1[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
137 static int drive2[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
138 static int drive3[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
140 static int (*drives[4])[8] = {&drive0, &drive1, &drive2, &drive3};
142 enum {D_PRT, D_PRO, D_UNI, D_MOD, D_GEO, D_SBY, D_DLY, D_SLV};
144 /* end of parameters */
146 #include <linux/init.h>
147 #include <linux/module.h>
148 #include <linux/fs.h>
149 #include <linux/delay.h>
150 #include <linux/hdreg.h>
151 #include <linux/cdrom.h> /* for the eject ioctl */
152 #include <linux/blkdev.h>
153 #include <linux/blkpg.h>
154 #include <linux/kernel.h>
155 #include <asm/uaccess.h>
156 #include <linux/workqueue.h>
158 static DEFINE_SPINLOCK(pd_lock);
160 module_param(verbose, bool, 0);
161 module_param(major, int, 0);
162 module_param(name, charp, 0);
163 module_param(cluster, int, 0);
164 module_param(nice, int, 0);
165 module_param_array(drive0, int, NULL, 0);
166 module_param_array(drive1, int, NULL, 0);
167 module_param_array(drive2, int, NULL, 0);
168 module_param_array(drive3, int, NULL, 0);
170 #include "paride.h"
172 #define PD_BITS 4
174 /* numbers for "SCSI" geometry */
176 #define PD_LOG_HEADS 64
177 #define PD_LOG_SECTS 32
179 #define PD_ID_OFF 54
180 #define PD_ID_LEN 14
182 #define PD_MAX_RETRIES 5
183 #define PD_TMO 800 /* interrupt timeout in jiffies */
184 #define PD_SPIN_DEL 50 /* spin delay in micro-seconds */
186 #define PD_SPIN (1000000*PD_TMO)/(HZ*PD_SPIN_DEL)
188 #define STAT_ERR 0x00001
189 #define STAT_INDEX 0x00002
190 #define STAT_ECC 0x00004
191 #define STAT_DRQ 0x00008
192 #define STAT_SEEK 0x00010
193 #define STAT_WRERR 0x00020
194 #define STAT_READY 0x00040
195 #define STAT_BUSY 0x00080
197 #define ERR_AMNF 0x00100
198 #define ERR_TK0NF 0x00200
199 #define ERR_ABRT 0x00400
200 #define ERR_MCR 0x00800
201 #define ERR_IDNF 0x01000
202 #define ERR_MC 0x02000
203 #define ERR_UNC 0x04000
204 #define ERR_TMO 0x10000
206 #define IDE_READ 0x20
207 #define IDE_WRITE 0x30
208 #define IDE_READ_VRFY 0x40
209 #define IDE_INIT_DEV_PARMS 0x91
210 #define IDE_STANDBY 0x96
211 #define IDE_ACKCHANGE 0xdb
212 #define IDE_DOORLOCK 0xde
213 #define IDE_DOORUNLOCK 0xdf
214 #define IDE_IDENTIFY 0xec
215 #define IDE_EJECT 0xed
217 #define PD_NAMELEN 8
219 struct pd_unit {
220 struct pi_adapter pia; /* interface to paride layer */
221 struct pi_adapter *pi;
222 int access; /* count of active opens ... */
223 int capacity; /* Size of this volume in sectors */
224 int heads; /* physical geometry */
225 int sectors;
226 int cylinders;
227 int can_lba;
228 int drive; /* master=0 slave=1 */
229 int changed; /* Have we seen a disk change ? */
230 int removable; /* removable media device ? */
231 int standby;
232 int alt_geom;
233 char name[PD_NAMELEN]; /* pda, pdb, etc ... */
234 struct gendisk *gd;
237 static struct pd_unit pd[PD_UNITS];
239 static char pd_scratch[512]; /* scratch block buffer */
241 static char *pd_errs[17] = { "ERR", "INDEX", "ECC", "DRQ", "SEEK", "WRERR",
242 "READY", "BUSY", "AMNF", "TK0NF", "ABRT", "MCR",
243 "IDNF", "MC", "UNC", "???", "TMO"
246 static inline int status_reg(struct pd_unit *disk)
248 return pi_read_regr(disk->pi, 1, 6);
251 static inline int read_reg(struct pd_unit *disk, int reg)
253 return pi_read_regr(disk->pi, 0, reg);
256 static inline void write_status(struct pd_unit *disk, int val)
258 pi_write_regr(disk->pi, 1, 6, val);
261 static inline void write_reg(struct pd_unit *disk, int reg, int val)
263 pi_write_regr(disk->pi, 0, reg, val);
266 static inline u8 DRIVE(struct pd_unit *disk)
268 return 0xa0+0x10*disk->drive;
271 /* ide command interface */
273 static void pd_print_error(struct pd_unit *disk, char *msg, int status)
275 int i;
277 printk("%s: %s: status = 0x%x =", disk->name, msg, status);
278 for (i = 0; i < ARRAY_SIZE(pd_errs); i++)
279 if (status & (1 << i))
280 printk(" %s", pd_errs[i]);
281 printk("\n");
284 static void pd_reset(struct pd_unit *disk)
285 { /* called only for MASTER drive */
286 write_status(disk, 4);
287 udelay(50);
288 write_status(disk, 0);
289 udelay(250);
292 #define DBMSG(msg) ((verbose>1)?(msg):NULL)
294 static int pd_wait_for(struct pd_unit *disk, int w, char *msg)
295 { /* polled wait */
296 int k, r, e;
298 k = 0;
299 while (k < PD_SPIN) {
300 r = status_reg(disk);
301 k++;
302 if (((r & w) == w) && !(r & STAT_BUSY))
303 break;
304 udelay(PD_SPIN_DEL);
306 e = (read_reg(disk, 1) << 8) + read_reg(disk, 7);
307 if (k >= PD_SPIN)
308 e |= ERR_TMO;
309 if ((e & (STAT_ERR | ERR_TMO)) && (msg != NULL))
310 pd_print_error(disk, msg, e);
311 return e;
314 static void pd_send_command(struct pd_unit *disk, int n, int s, int h, int c0, int c1, int func)
316 write_reg(disk, 6, DRIVE(disk) + h);
317 write_reg(disk, 1, 0); /* the IDE task file */
318 write_reg(disk, 2, n);
319 write_reg(disk, 3, s);
320 write_reg(disk, 4, c0);
321 write_reg(disk, 5, c1);
322 write_reg(disk, 7, func);
324 udelay(1);
327 static void pd_ide_command(struct pd_unit *disk, int func, int block, int count)
329 int c1, c0, h, s;
331 if (disk->can_lba) {
332 s = block & 255;
333 c0 = (block >>= 8) & 255;
334 c1 = (block >>= 8) & 255;
335 h = ((block >>= 8) & 15) + 0x40;
336 } else {
337 s = (block % disk->sectors) + 1;
338 h = (block /= disk->sectors) % disk->heads;
339 c0 = (block /= disk->heads) % 256;
340 c1 = (block >>= 8);
342 pd_send_command(disk, count, s, h, c0, c1, func);
345 /* The i/o request engine */
347 enum action {Fail = 0, Ok = 1, Hold, Wait};
349 static struct request *pd_req; /* current request */
350 static enum action (*phase)(void);
352 static void run_fsm(void);
354 static void ps_tq_int(struct work_struct *work);
356 static DECLARE_DELAYED_WORK(fsm_tq, ps_tq_int);
358 static void schedule_fsm(void)
360 if (!nice)
361 schedule_delayed_work(&fsm_tq, 0);
362 else
363 schedule_delayed_work(&fsm_tq, nice-1);
366 static void ps_tq_int(struct work_struct *work)
368 run_fsm();
371 static enum action do_pd_io_start(void);
372 static enum action pd_special(void);
373 static enum action do_pd_read_start(void);
374 static enum action do_pd_write_start(void);
375 static enum action do_pd_read_drq(void);
376 static enum action do_pd_write_done(void);
378 static struct request_queue *pd_queue;
379 static int pd_claimed;
381 static struct pd_unit *pd_current; /* current request's drive */
382 static PIA *pi_current; /* current request's PIA */
384 static void run_fsm(void)
386 while (1) {
387 enum action res;
388 unsigned long saved_flags;
389 int stop = 0;
391 if (!phase) {
392 pd_current = pd_req->rq_disk->private_data;
393 pi_current = pd_current->pi;
394 phase = do_pd_io_start;
397 switch (pd_claimed) {
398 case 0:
399 pd_claimed = 1;
400 if (!pi_schedule_claimed(pi_current, run_fsm))
401 return;
402 case 1:
403 pd_claimed = 2;
404 pi_current->proto->connect(pi_current);
407 switch(res = phase()) {
408 case Ok: case Fail:
409 pi_disconnect(pi_current);
410 pd_claimed = 0;
411 phase = NULL;
412 spin_lock_irqsave(&pd_lock, saved_flags);
413 if (!__blk_end_request_cur(pd_req,
414 res == Ok ? 0 : -EIO)) {
415 pd_req = blk_fetch_request(pd_queue);
416 if (!pd_req)
417 stop = 1;
419 spin_unlock_irqrestore(&pd_lock, saved_flags);
420 if (stop)
421 return;
422 case Hold:
423 schedule_fsm();
424 return;
425 case Wait:
426 pi_disconnect(pi_current);
427 pd_claimed = 0;
432 static int pd_retries = 0; /* i/o error retry count */
433 static int pd_block; /* address of next requested block */
434 static int pd_count; /* number of blocks still to do */
435 static int pd_run; /* sectors in current cluster */
436 static int pd_cmd; /* current command READ/WRITE */
437 static char *pd_buf; /* buffer for request in progress */
439 static enum action do_pd_io_start(void)
441 if (blk_special_request(pd_req)) {
442 phase = pd_special;
443 return pd_special();
446 pd_cmd = rq_data_dir(pd_req);
447 if (pd_cmd == READ || pd_cmd == WRITE) {
448 pd_block = blk_rq_pos(pd_req);
449 pd_count = blk_rq_cur_sectors(pd_req);
450 if (pd_block + pd_count > get_capacity(pd_req->rq_disk))
451 return Fail;
452 pd_run = blk_rq_sectors(pd_req);
453 pd_buf = pd_req->buffer;
454 pd_retries = 0;
455 if (pd_cmd == READ)
456 return do_pd_read_start();
457 else
458 return do_pd_write_start();
460 return Fail;
463 static enum action pd_special(void)
465 enum action (*func)(struct pd_unit *) = pd_req->special;
466 return func(pd_current);
469 static int pd_next_buf(void)
471 unsigned long saved_flags;
473 pd_count--;
474 pd_run--;
475 pd_buf += 512;
476 pd_block++;
477 if (!pd_run)
478 return 1;
479 if (pd_count)
480 return 0;
481 spin_lock_irqsave(&pd_lock, saved_flags);
482 __blk_end_request_cur(pd_req, 0);
483 pd_count = blk_rq_cur_sectors(pd_req);
484 pd_buf = pd_req->buffer;
485 spin_unlock_irqrestore(&pd_lock, saved_flags);
486 return 0;
489 static unsigned long pd_timeout;
491 static enum action do_pd_read_start(void)
493 if (pd_wait_for(pd_current, STAT_READY, "do_pd_read") & STAT_ERR) {
494 if (pd_retries < PD_MAX_RETRIES) {
495 pd_retries++;
496 return Wait;
498 return Fail;
500 pd_ide_command(pd_current, IDE_READ, pd_block, pd_run);
501 phase = do_pd_read_drq;
502 pd_timeout = jiffies + PD_TMO;
503 return Hold;
506 static enum action do_pd_write_start(void)
508 if (pd_wait_for(pd_current, STAT_READY, "do_pd_write") & STAT_ERR) {
509 if (pd_retries < PD_MAX_RETRIES) {
510 pd_retries++;
511 return Wait;
513 return Fail;
515 pd_ide_command(pd_current, IDE_WRITE, pd_block, pd_run);
516 while (1) {
517 if (pd_wait_for(pd_current, STAT_DRQ, "do_pd_write_drq") & STAT_ERR) {
518 if (pd_retries < PD_MAX_RETRIES) {
519 pd_retries++;
520 return Wait;
522 return Fail;
524 pi_write_block(pd_current->pi, pd_buf, 512);
525 if (pd_next_buf())
526 break;
528 phase = do_pd_write_done;
529 pd_timeout = jiffies + PD_TMO;
530 return Hold;
533 static inline int pd_ready(void)
535 return !(status_reg(pd_current) & STAT_BUSY);
538 static enum action do_pd_read_drq(void)
540 if (!pd_ready() && !time_after_eq(jiffies, pd_timeout))
541 return Hold;
543 while (1) {
544 if (pd_wait_for(pd_current, STAT_DRQ, "do_pd_read_drq") & STAT_ERR) {
545 if (pd_retries < PD_MAX_RETRIES) {
546 pd_retries++;
547 phase = do_pd_read_start;
548 return Wait;
550 return Fail;
552 pi_read_block(pd_current->pi, pd_buf, 512);
553 if (pd_next_buf())
554 break;
556 return Ok;
559 static enum action do_pd_write_done(void)
561 if (!pd_ready() && !time_after_eq(jiffies, pd_timeout))
562 return Hold;
564 if (pd_wait_for(pd_current, STAT_READY, "do_pd_write_done") & STAT_ERR) {
565 if (pd_retries < PD_MAX_RETRIES) {
566 pd_retries++;
567 phase = do_pd_write_start;
568 return Wait;
570 return Fail;
572 return Ok;
575 /* special io requests */
577 /* According to the ATA standard, the default CHS geometry should be
578 available following a reset. Some Western Digital drives come up
579 in a mode where only LBA addresses are accepted until the device
580 parameters are initialised.
583 static void pd_init_dev_parms(struct pd_unit *disk)
585 pd_wait_for(disk, 0, DBMSG("before init_dev_parms"));
586 pd_send_command(disk, disk->sectors, 0, disk->heads - 1, 0, 0,
587 IDE_INIT_DEV_PARMS);
588 udelay(300);
589 pd_wait_for(disk, 0, "Initialise device parameters");
592 static enum action pd_door_lock(struct pd_unit *disk)
594 if (!(pd_wait_for(disk, STAT_READY, "Lock") & STAT_ERR)) {
595 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORLOCK);
596 pd_wait_for(disk, STAT_READY, "Lock done");
598 return Ok;
601 static enum action pd_door_unlock(struct pd_unit *disk)
603 if (!(pd_wait_for(disk, STAT_READY, "Lock") & STAT_ERR)) {
604 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORUNLOCK);
605 pd_wait_for(disk, STAT_READY, "Lock done");
607 return Ok;
610 static enum action pd_eject(struct pd_unit *disk)
612 pd_wait_for(disk, 0, DBMSG("before unlock on eject"));
613 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORUNLOCK);
614 pd_wait_for(disk, 0, DBMSG("after unlock on eject"));
615 pd_wait_for(disk, 0, DBMSG("before eject"));
616 pd_send_command(disk, 0, 0, 0, 0, 0, IDE_EJECT);
617 pd_wait_for(disk, 0, DBMSG("after eject"));
618 return Ok;
621 static enum action pd_media_check(struct pd_unit *disk)
623 int r = pd_wait_for(disk, STAT_READY, DBMSG("before media_check"));
624 if (!(r & STAT_ERR)) {
625 pd_send_command(disk, 1, 1, 0, 0, 0, IDE_READ_VRFY);
626 r = pd_wait_for(disk, STAT_READY, DBMSG("RDY after READ_VRFY"));
627 } else
628 disk->changed = 1; /* say changed if other error */
629 if (r & ERR_MC) {
630 disk->changed = 1;
631 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_ACKCHANGE);
632 pd_wait_for(disk, STAT_READY, DBMSG("RDY after ACKCHANGE"));
633 pd_send_command(disk, 1, 1, 0, 0, 0, IDE_READ_VRFY);
634 r = pd_wait_for(disk, STAT_READY, DBMSG("RDY after VRFY"));
636 return Ok;
639 static void pd_standby_off(struct pd_unit *disk)
641 pd_wait_for(disk, 0, DBMSG("before STANDBY"));
642 pd_send_command(disk, 0, 0, 0, 0, 0, IDE_STANDBY);
643 pd_wait_for(disk, 0, DBMSG("after STANDBY"));
646 static enum action pd_identify(struct pd_unit *disk)
648 int j;
649 char id[PD_ID_LEN + 1];
651 /* WARNING: here there may be dragons. reset() applies to both drives,
652 but we call it only on probing the MASTER. This should allow most
653 common configurations to work, but be warned that a reset can clear
654 settings on the SLAVE drive.
657 if (disk->drive == 0)
658 pd_reset(disk);
660 write_reg(disk, 6, DRIVE(disk));
661 pd_wait_for(disk, 0, DBMSG("before IDENT"));
662 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_IDENTIFY);
664 if (pd_wait_for(disk, STAT_DRQ, DBMSG("IDENT DRQ")) & STAT_ERR)
665 return Fail;
666 pi_read_block(disk->pi, pd_scratch, 512);
667 disk->can_lba = pd_scratch[99] & 2;
668 disk->sectors = le16_to_cpu(*(__le16 *) (pd_scratch + 12));
669 disk->heads = le16_to_cpu(*(__le16 *) (pd_scratch + 6));
670 disk->cylinders = le16_to_cpu(*(__le16 *) (pd_scratch + 2));
671 if (disk->can_lba)
672 disk->capacity = le32_to_cpu(*(__le32 *) (pd_scratch + 120));
673 else
674 disk->capacity = disk->sectors * disk->heads * disk->cylinders;
676 for (j = 0; j < PD_ID_LEN; j++)
677 id[j ^ 1] = pd_scratch[j + PD_ID_OFF];
678 j = PD_ID_LEN - 1;
679 while ((j >= 0) && (id[j] <= 0x20))
680 j--;
681 j++;
682 id[j] = 0;
684 disk->removable = pd_scratch[0] & 0x80;
686 printk("%s: %s, %s, %d blocks [%dM], (%d/%d/%d), %s media\n",
687 disk->name, id,
688 disk->drive ? "slave" : "master",
689 disk->capacity, disk->capacity / 2048,
690 disk->cylinders, disk->heads, disk->sectors,
691 disk->removable ? "removable" : "fixed");
693 if (disk->capacity)
694 pd_init_dev_parms(disk);
695 if (!disk->standby)
696 pd_standby_off(disk);
698 return Ok;
701 /* end of io request engine */
703 static void do_pd_request(struct request_queue * q)
705 if (pd_req)
706 return;
707 pd_req = blk_fetch_request(q);
708 if (!pd_req)
709 return;
711 schedule_fsm();
714 static int pd_special_command(struct pd_unit *disk,
715 enum action (*func)(struct pd_unit *disk))
717 struct request *rq;
718 int err = 0;
720 rq = blk_get_request(disk->gd->queue, READ, __GFP_WAIT);
722 rq->cmd_type = REQ_TYPE_SPECIAL;
723 rq->special = func;
725 err = blk_execute_rq(disk->gd->queue, disk->gd, rq, 0);
727 blk_put_request(rq);
728 return err;
731 /* kernel glue structures */
733 static int pd_open(struct block_device *bdev, fmode_t mode)
735 struct pd_unit *disk = bdev->bd_disk->private_data;
737 disk->access++;
739 if (disk->removable) {
740 pd_special_command(disk, pd_media_check);
741 pd_special_command(disk, pd_door_lock);
743 return 0;
746 static int pd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
748 struct pd_unit *disk = bdev->bd_disk->private_data;
750 if (disk->alt_geom) {
751 geo->heads = PD_LOG_HEADS;
752 geo->sectors = PD_LOG_SECTS;
753 geo->cylinders = disk->capacity / (geo->heads * geo->sectors);
754 } else {
755 geo->heads = disk->heads;
756 geo->sectors = disk->sectors;
757 geo->cylinders = disk->cylinders;
760 return 0;
763 static int pd_ioctl(struct block_device *bdev, fmode_t mode,
764 unsigned int cmd, unsigned long arg)
766 struct pd_unit *disk = bdev->bd_disk->private_data;
768 switch (cmd) {
769 case CDROMEJECT:
770 if (disk->access == 1)
771 pd_special_command(disk, pd_eject);
772 return 0;
773 default:
774 return -EINVAL;
778 static int pd_release(struct gendisk *p, fmode_t mode)
780 struct pd_unit *disk = p->private_data;
782 if (!--disk->access && disk->removable)
783 pd_special_command(disk, pd_door_unlock);
785 return 0;
788 static int pd_check_media(struct gendisk *p)
790 struct pd_unit *disk = p->private_data;
791 int r;
792 if (!disk->removable)
793 return 0;
794 pd_special_command(disk, pd_media_check);
795 r = disk->changed;
796 disk->changed = 0;
797 return r;
800 static int pd_revalidate(struct gendisk *p)
802 struct pd_unit *disk = p->private_data;
803 if (pd_special_command(disk, pd_identify) == 0)
804 set_capacity(p, disk->capacity);
805 else
806 set_capacity(p, 0);
807 return 0;
810 static const struct block_device_operations pd_fops = {
811 .owner = THIS_MODULE,
812 .open = pd_open,
813 .release = pd_release,
814 .locked_ioctl = pd_ioctl,
815 .getgeo = pd_getgeo,
816 .media_changed = pd_check_media,
817 .revalidate_disk= pd_revalidate
820 /* probing */
822 static void pd_probe_drive(struct pd_unit *disk)
824 struct gendisk *p = alloc_disk(1 << PD_BITS);
825 if (!p)
826 return;
827 strcpy(p->disk_name, disk->name);
828 p->fops = &pd_fops;
829 p->major = major;
830 p->first_minor = (disk - pd) << PD_BITS;
831 disk->gd = p;
832 p->private_data = disk;
833 p->queue = pd_queue;
835 if (disk->drive == -1) {
836 for (disk->drive = 0; disk->drive <= 1; disk->drive++)
837 if (pd_special_command(disk, pd_identify) == 0)
838 return;
839 } else if (pd_special_command(disk, pd_identify) == 0)
840 return;
841 disk->gd = NULL;
842 put_disk(p);
845 static int pd_detect(void)
847 int found = 0, unit, pd_drive_count = 0;
848 struct pd_unit *disk;
850 for (unit = 0; unit < PD_UNITS; unit++) {
851 int *parm = *drives[unit];
852 struct pd_unit *disk = pd + unit;
853 disk->pi = &disk->pia;
854 disk->access = 0;
855 disk->changed = 1;
856 disk->capacity = 0;
857 disk->drive = parm[D_SLV];
858 snprintf(disk->name, PD_NAMELEN, "%s%c", name, 'a'+unit);
859 disk->alt_geom = parm[D_GEO];
860 disk->standby = parm[D_SBY];
861 if (parm[D_PRT])
862 pd_drive_count++;
865 if (pd_drive_count == 0) { /* nothing spec'd - so autoprobe for 1 */
866 disk = pd;
867 if (pi_init(disk->pi, 1, -1, -1, -1, -1, -1, pd_scratch,
868 PI_PD, verbose, disk->name)) {
869 pd_probe_drive(disk);
870 if (!disk->gd)
871 pi_release(disk->pi);
874 } else {
875 for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) {
876 int *parm = *drives[unit];
877 if (!parm[D_PRT])
878 continue;
879 if (pi_init(disk->pi, 0, parm[D_PRT], parm[D_MOD],
880 parm[D_UNI], parm[D_PRO], parm[D_DLY],
881 pd_scratch, PI_PD, verbose, disk->name)) {
882 pd_probe_drive(disk);
883 if (!disk->gd)
884 pi_release(disk->pi);
888 for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) {
889 if (disk->gd) {
890 set_capacity(disk->gd, disk->capacity);
891 add_disk(disk->gd);
892 found = 1;
895 if (!found)
896 printk("%s: no valid drive found\n", name);
897 return found;
900 static int __init pd_init(void)
902 if (disable)
903 goto out1;
905 pd_queue = blk_init_queue(do_pd_request, &pd_lock);
906 if (!pd_queue)
907 goto out1;
909 blk_queue_max_sectors(pd_queue, cluster);
911 if (register_blkdev(major, name))
912 goto out2;
914 printk("%s: %s version %s, major %d, cluster %d, nice %d\n",
915 name, name, PD_VERSION, major, cluster, nice);
916 if (!pd_detect())
917 goto out3;
919 return 0;
921 out3:
922 unregister_blkdev(major, name);
923 out2:
924 blk_cleanup_queue(pd_queue);
925 out1:
926 return -ENODEV;
929 static void __exit pd_exit(void)
931 struct pd_unit *disk;
932 int unit;
933 unregister_blkdev(major, name);
934 for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) {
935 struct gendisk *p = disk->gd;
936 if (p) {
937 disk->gd = NULL;
938 del_gendisk(p);
939 put_disk(p);
940 pi_release(disk->pi);
943 blk_cleanup_queue(pd_queue);
946 MODULE_LICENSE("GPL");
947 module_init(pd_init)
948 module_exit(pd_exit)