drivers/mtd/nand/h1910.c

   1 /*
   2  *  drivers/mtd/nand/h1910.c
   3  *
   4  *  Copyright (C) 2003 Joshua Wise (joshua@joshuawise.com)
   5  *
   6  *  Derived from drivers/mtd/nand/edb7312.c
   7  *       Copyright (C) 2002 Marius Gröger (mag@sysgo.de)
   8  *       Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13  *
  14  *  Overview:
  15  *   This is a device driver for the NAND flash device found on the
  16  *   iPAQ h1910 board which utilizes the Samsung K9F2808 part. This is
  17  *   a 128Mibit (16MiB x 8 bits) NAND flash device.
  18  */
  19
  20 #include <linux/slab.h>
  21 #include <linux/init.h>
  22 #include <linux/module.h>
  23 #include <linux/mtd/mtd.h>
  24 #include <linux/mtd/nand.h>
  25 #include <linux/mtd/partitions.h>
  26 #include <asm/io.h>
  27 #include <mach/hardware.h>      /* for CLPS7111_VIRT_BASE */
  28 #include <asm/sizes.h>
  29 #include <mach/h1900-gpio.h>
  30 #include <mach/ipaq.h>
  31
  32 /*
  33  * MTD structure for EDB7312 board
  34  */
  35 static struct mtd_info *h1910_nand_mtd = NULL;
  36
  37 /*
  38  * Module stuff
  39  */
  40
  41 #ifdef CONFIG_MTD_PARTITIONS
  42 /*
  43  * Define static partitions for flash device
  44  */
  45 static struct mtd_partition partition_info[] = {
  46       {name:"h1910 NAND Flash",
  47               offset:0,
  48       size:16 * 1024 * 1024}
  49 };
  50
  51 #define NUM_PARTITIONS 1
  52
  53 #endif
  54
  55 /*
  56  *      hardware specific access to control-lines
  57  *
  58  *      NAND_NCE: bit 0 - don't care
  59  *      NAND_CLE: bit 1 - address bit 2
  60  *      NAND_ALE: bit 2 - address bit 3
  61  */
  62 static void h1910_hwcontrol(struct mtd_info *mtd, int cmd,
  63                             unsigned int ctrl)
  64 {
  65         struct nand_chip *chip = mtd->priv;
  66
  67         if (cmd != NAND_CMD_NONE)
  68                 writeb(cmd, chip->IO_ADDR_W | ((ctrl & 0x6) << 1));
  69 }
  70
  71 /*
  72  *      read device ready pin
  73  */
  74 #if 0
  75 static int h1910_device_ready(struct mtd_info *mtd)
  76 {
  77         return (GPLR(55) & GPIO_bit(55));
  78 }
  79 #endif
  80
  81 /*
  82  * Main initialization routine
  83  */
  84 static int __init h1910_init(void)
  85 {
  86         struct nand_chip *this;
  87         const char *part_type = 0;
  88         int mtd_parts_nb = 0;
  89         struct mtd_partition *mtd_parts = 0;
  90         void __iomem *nandaddr;
  91
  92         if (!machine_is_h1900())
  93                 return -ENODEV;
  94
  95         nandaddr = ioremap(0x08000000, 0x1000);
  96         if (!nandaddr) {
  97                 printk("Failed to ioremap nand flash.\n");
  98                 return -ENOMEM;
  99         }
 100
 101         /* Allocate memory for MTD device structure and private data */
 102         h1910_nand_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
 103         if (!h1910_nand_mtd) {
 104                 printk("Unable to allocate h1910 NAND MTD device structure.\n");
 105                 iounmap((void *)nandaddr);
 106                 return -ENOMEM;
 107         }
 108
 109         /* Get pointer to private data */
 110         this = (struct nand_chip *)(&h1910_nand_mtd[1]);
 111
 112         /* Initialize structures */
 113         memset(h1910_nand_mtd, 0, sizeof(struct mtd_info));
 114         memset(this, 0, sizeof(struct nand_chip));
 115
 116         /* Link the private data with the MTD structure */
 117         h1910_nand_mtd->priv = this;
 118         h1910_nand_mtd->owner = THIS_MODULE;
 119
 120         /*
 121          * Enable VPEN
 122          */
 123         GPSR(37) = GPIO_bit(37);
 124
 125         /* insert callbacks */
 126         this->IO_ADDR_R = nandaddr;
 127         this->IO_ADDR_W = nandaddr;
 128         this->cmd_ctrl = h1910_hwcontrol;
 129         this->dev_ready = NULL; /* unknown whether that was correct or not so we will just do it like this */
 130         /* 15 us command delay time */
 131         this->chip_delay = 50;
 132         this->ecc.mode = NAND_ECC_SOFT;
 133         this->options = NAND_NO_AUTOINCR;
 134
 135         /* Scan to find existence of the device */
 136         if (nand_scan(h1910_nand_mtd, 1)) {
 137                 printk(KERN_NOTICE "No NAND device - returning -ENXIO\n");
 138                 kfree(h1910_nand_mtd);
 139                 iounmap((void *)nandaddr);
 140                 return -ENXIO;
 141         }
 142 #ifdef CONFIG_MTD_CMDLINE_PARTS
 143         mtd_parts_nb = parse_cmdline_partitions(h1910_nand_mtd, &mtd_parts, "h1910-nand");
 144         if (mtd_parts_nb > 0)
 145                 part_type = "command line";
 146         else
 147                 mtd_parts_nb = 0;
 148 #endif
 149         if (mtd_parts_nb == 0) {
 150                 mtd_parts = partition_info;
 151                 mtd_parts_nb = NUM_PARTITIONS;
 152                 part_type = "static";
 153         }
 154
 155         /* Register the partitions */
 156         printk(KERN_NOTICE "Using %s partition definition\n", part_type);
 157         add_mtd_partitions(h1910_nand_mtd, mtd_parts, mtd_parts_nb);
 158
 159         /* Return happy */
 160         return 0;
 161 }
 162
 163 module_init(h1910_init);
 164
 165 /*
 166  * Clean up routine
 167  */
 168 static void __exit h1910_cleanup(void)
 169 {
 170         struct nand_chip *this = (struct nand_chip *)&h1910_nand_mtd[1];
 171
 172         /* Release resources, unregister device */
 173         nand_release(h1910_nand_mtd);
 174
 175         /* Release io resource */
 176         iounmap((void *)this->IO_ADDR_W);
 177
 178         /* Free the MTD device structure */
 179         kfree(h1910_nand_mtd);
 180 }
 181
 182 module_exit(h1910_cleanup);
 183
 184 MODULE_LICENSE("GPL");
 185 MODULE_AUTHOR("Joshua Wise <joshua at joshuawise dot com>");
 186 MODULE_DESCRIPTION("NAND flash driver for iPAQ h1910");