2 * drivers/s390/char/tape_3590.c
3 * tape device discipline for 3590 tapes.
5 * Copyright IBM Corp. 2001, 2009
6 * Author(s): Stefan Bader <shbader@de.ibm.com>
7 * Michael Holzheu <holzheu@de.ibm.com>
8 * Martin Schwidefsky <schwidefsky@de.ibm.com>
11 #define KMSG_COMPONENT "tape_3590"
13 #include <linux/module.h>
14 #include <linux/init.h>
15 #include <linux/bio.h>
16 #include <asm/ebcdic.h>
18 #define TAPE_DBF_AREA tape_3590_dbf
19 #define BUFSIZE 512 /* size of buffers for dynamic generated messages */
23 #include "tape_3590.h"
26 * Pointer to debug area.
28 debug_info_t
*TAPE_DBF_AREA
= NULL
;
29 EXPORT_SYMBOL(TAPE_DBF_AREA
);
31 /*******************************************************************
32 * Error Recovery fuctions:
33 * - Read Opposite: implemented
34 * - Read Device (buffered) log: BRA
35 * - Read Library log: BRA
37 * - Long Busy: implemented
38 * - Special Intercept: BRA
39 * - Read Alternate: implemented
40 *******************************************************************/
42 static const char *tape_3590_msg
[TAPE_3590_MAX_MSG
] = {
44 [0x10] = "Lost Sense",
45 [0x11] = "Assigned Elsewhere",
46 [0x12] = "Allegiance Reset",
47 [0x13] = "Shared Access Violation",
48 [0x20] = "Command Reject",
49 [0x21] = "Configuration Error",
50 [0x22] = "Protection Exception",
51 [0x23] = "Write Protect",
52 [0x24] = "Write Length",
53 [0x25] = "Read-Only Format",
54 [0x31] = "Beginning of Partition",
55 [0x33] = "End of Partition",
56 [0x34] = "End of Data",
57 [0x35] = "Block not found",
58 [0x40] = "Device Intervention",
59 [0x41] = "Loader Intervention",
60 [0x42] = "Library Intervention",
61 [0x50] = "Write Error",
62 [0x51] = "Erase Error",
63 [0x52] = "Formatting Error",
64 [0x53] = "Read Error",
65 [0x54] = "Unsupported Format",
66 [0x55] = "No Formatting",
67 [0x56] = "Positioning lost",
68 [0x57] = "Read Length",
69 [0x60] = "Unsupported Medium",
70 [0x61] = "Medium Length Error",
71 [0x62] = "Medium removed",
72 [0x64] = "Load Check",
73 [0x65] = "Unload Check",
74 [0x70] = "Equipment Check",
75 [0x71] = "Bus out Check",
76 [0x72] = "Protocol Error",
77 [0x73] = "Interface Error",
79 [0x75] = "Halt Signal",
80 [0x90] = "Device fenced",
81 [0x91] = "Device Path fenced",
82 [0xa0] = "Volume misplaced",
83 [0xa1] = "Volume inaccessible",
84 [0xa2] = "Volume in input",
85 [0xa3] = "Volume ejected",
86 [0xa4] = "All categories reserved",
87 [0xa5] = "Duplicate Volume",
88 [0xa6] = "Library Manager Offline",
89 [0xa7] = "Library Output Station full",
90 [0xa8] = "Vision System non-operational",
91 [0xa9] = "Library Manager Equipment Check",
92 [0xaa] = "Library Equipment Check",
93 [0xab] = "All Library Cells full",
94 [0xac] = "No Cleaner Volumes in Library",
95 [0xad] = "I/O Station door open",
96 [0xae] = "Subsystem environmental alert",
99 static int crypt_supported(struct tape_device
*device
)
101 return TAPE390_CRYPT_SUPPORTED(TAPE_3590_CRYPT_INFO(device
));
104 static int crypt_enabled(struct tape_device
*device
)
106 return TAPE390_CRYPT_ON(TAPE_3590_CRYPT_INFO(device
));
109 static void ext_to_int_kekl(struct tape390_kekl
*in
,
110 struct tape3592_kekl
*out
)
114 memset(out
, 0, sizeof(*out
));
115 if (in
->type
== TAPE390_KEKL_TYPE_HASH
)
117 if (in
->type_on_tape
== TAPE390_KEKL_TYPE_HASH
)
119 strncpy(out
->label
, in
->label
, 64);
120 for (i
= strlen(in
->label
); i
< sizeof(out
->label
); i
++)
122 ASCEBC(out
->label
, sizeof(out
->label
));
125 static void int_to_ext_kekl(struct tape3592_kekl
*in
,
126 struct tape390_kekl
*out
)
128 memset(out
, 0, sizeof(*out
));
130 out
->type
= TAPE390_KEKL_TYPE_HASH
;
132 out
->type
= TAPE390_KEKL_TYPE_LABEL
;
134 out
->type_on_tape
= TAPE390_KEKL_TYPE_HASH
;
136 out
->type_on_tape
= TAPE390_KEKL_TYPE_LABEL
;
137 memcpy(out
->label
, in
->label
, sizeof(in
->label
));
138 EBCASC(out
->label
, sizeof(in
->label
));
139 strstrip(out
->label
);
142 static void int_to_ext_kekl_pair(struct tape3592_kekl_pair
*in
,
143 struct tape390_kekl_pair
*out
)
145 if (in
->count
== 0) {
146 out
->kekl
[0].type
= TAPE390_KEKL_TYPE_NONE
;
147 out
->kekl
[0].type_on_tape
= TAPE390_KEKL_TYPE_NONE
;
148 out
->kekl
[1].type
= TAPE390_KEKL_TYPE_NONE
;
149 out
->kekl
[1].type_on_tape
= TAPE390_KEKL_TYPE_NONE
;
150 } else if (in
->count
== 1) {
151 int_to_ext_kekl(&in
->kekl
[0], &out
->kekl
[0]);
152 out
->kekl
[1].type
= TAPE390_KEKL_TYPE_NONE
;
153 out
->kekl
[1].type_on_tape
= TAPE390_KEKL_TYPE_NONE
;
154 } else if (in
->count
== 2) {
155 int_to_ext_kekl(&in
->kekl
[0], &out
->kekl
[0]);
156 int_to_ext_kekl(&in
->kekl
[1], &out
->kekl
[1]);
158 printk("Invalid KEKL number: %d\n", in
->count
);
163 static int check_ext_kekl(struct tape390_kekl
*kekl
)
165 if (kekl
->type
== TAPE390_KEKL_TYPE_NONE
)
167 if (kekl
->type
> TAPE390_KEKL_TYPE_HASH
)
169 if (kekl
->type_on_tape
== TAPE390_KEKL_TYPE_NONE
)
171 if (kekl
->type_on_tape
> TAPE390_KEKL_TYPE_HASH
)
173 if ((kekl
->type
== TAPE390_KEKL_TYPE_HASH
) &&
174 (kekl
->type_on_tape
== TAPE390_KEKL_TYPE_LABEL
))
182 static int check_ext_kekl_pair(struct tape390_kekl_pair
*kekls
)
184 if (check_ext_kekl(&kekls
->kekl
[0]))
186 if (check_ext_kekl(&kekls
->kekl
[1]))
197 static int tape_3592_kekl_query(struct tape_device
*device
,
198 struct tape390_kekl_pair
*ext_kekls
)
200 struct tape_request
*request
;
201 struct tape3592_kekl_query_order
*order
;
202 struct tape3592_kekl_query_data
*int_kekls
;
205 DBF_EVENT(6, "tape3592_kekl_query\n");
206 int_kekls
= kmalloc(sizeof(*int_kekls
), GFP_KERNEL
|GFP_DMA
);
209 request
= tape_alloc_request(2, sizeof(*order
));
210 if (IS_ERR(request
)) {
211 rc
= PTR_ERR(request
);
214 order
= request
->cpdata
;
215 memset(order
,0,sizeof(*order
));
217 order
->max_count
= 2;
218 request
->op
= TO_KEKL_QUERY
;
219 tape_ccw_cc(request
->cpaddr
, PERF_SUBSYS_FUNC
, sizeof(*order
), order
);
220 tape_ccw_end(request
->cpaddr
+ 1, READ_SS_DATA
, sizeof(*int_kekls
),
222 rc
= tape_do_io(device
, request
);
225 int_to_ext_kekl_pair(&int_kekls
->kekls
, ext_kekls
);
229 tape_free_request(request
);
238 static int tape_3592_ioctl_kekl_query(struct tape_device
*device
,
242 struct tape390_kekl_pair
*ext_kekls
;
244 DBF_EVENT(6, "tape_3592_ioctl_kekl_query\n");
245 if (!crypt_supported(device
))
247 if (!crypt_enabled(device
))
249 ext_kekls
= kmalloc(sizeof(*ext_kekls
), GFP_KERNEL
);
252 rc
= tape_3592_kekl_query(device
, ext_kekls
);
255 if (copy_to_user((char __user
*) arg
, ext_kekls
, sizeof(*ext_kekls
))) {
265 static int tape_3590_mttell(struct tape_device
*device
, int mt_count
);
270 static int tape_3592_kekl_set(struct tape_device
*device
,
271 struct tape390_kekl_pair
*ext_kekls
)
273 struct tape_request
*request
;
274 struct tape3592_kekl_set_order
*order
;
276 DBF_EVENT(6, "tape3592_kekl_set\n");
277 if (check_ext_kekl_pair(ext_kekls
)) {
278 DBF_EVENT(6, "invalid kekls\n");
281 if (tape_3590_mttell(device
, 0) != 0)
283 request
= tape_alloc_request(1, sizeof(*order
));
285 return PTR_ERR(request
);
286 order
= request
->cpdata
;
287 memset(order
, 0, sizeof(*order
));
289 order
->kekls
.count
= 2;
290 ext_to_int_kekl(&ext_kekls
->kekl
[0], &order
->kekls
.kekl
[0]);
291 ext_to_int_kekl(&ext_kekls
->kekl
[1], &order
->kekls
.kekl
[1]);
292 request
->op
= TO_KEKL_SET
;
293 tape_ccw_end(request
->cpaddr
, PERF_SUBSYS_FUNC
, sizeof(*order
), order
);
295 return tape_do_io_free(device
, request
);
301 static int tape_3592_ioctl_kekl_set(struct tape_device
*device
,
305 struct tape390_kekl_pair
*ext_kekls
;
307 DBF_EVENT(6, "tape_3592_ioctl_kekl_set\n");
308 if (!crypt_supported(device
))
310 if (!crypt_enabled(device
))
312 ext_kekls
= kmalloc(sizeof(*ext_kekls
), GFP_KERNEL
);
315 if (copy_from_user(ext_kekls
, (char __user
*)arg
, sizeof(*ext_kekls
))) {
319 rc
= tape_3592_kekl_set(device
, ext_kekls
);
328 static int tape_3592_enable_crypt(struct tape_device
*device
)
330 struct tape_request
*request
;
333 DBF_EVENT(6, "tape_3592_enable_crypt\n");
334 if (!crypt_supported(device
))
336 request
= tape_alloc_request(2, 72);
338 return PTR_ERR(request
);
339 data
= request
->cpdata
;
347 data
[36 + 14] = 0x2f;
348 data
[36 + 18] = 0xc3;
349 data
[36 + 35] = 0x72;
350 request
->op
= TO_CRYPT_ON
;
351 tape_ccw_cc(request
->cpaddr
, MODE_SET_CB
, 36, data
);
352 tape_ccw_end(request
->cpaddr
+ 1, MODE_SET_CB
, 36, data
+ 36);
353 return tape_do_io_free(device
, request
);
359 static int tape_3592_disable_crypt(struct tape_device
*device
)
361 struct tape_request
*request
;
364 DBF_EVENT(6, "tape_3592_disable_crypt\n");
365 if (!crypt_supported(device
))
367 request
= tape_alloc_request(2, 72);
369 return PTR_ERR(request
);
370 data
= request
->cpdata
;
376 data
[36 + 35] = 0x32;
378 request
->op
= TO_CRYPT_OFF
;
379 tape_ccw_cc(request
->cpaddr
, MODE_SET_CB
, 36, data
);
380 tape_ccw_end(request
->cpaddr
+ 1, MODE_SET_CB
, 36, data
+ 36);
382 return tape_do_io_free(device
, request
);
386 * IOCTL: Set encryption status
388 static int tape_3592_ioctl_crypt_set(struct tape_device
*device
,
391 struct tape390_crypt_info info
;
393 DBF_EVENT(6, "tape_3592_ioctl_crypt_set\n");
394 if (!crypt_supported(device
))
396 if (copy_from_user(&info
, (char __user
*)arg
, sizeof(info
)))
398 if (info
.status
& ~TAPE390_CRYPT_ON_MASK
)
400 if (info
.status
& TAPE390_CRYPT_ON_MASK
)
401 return tape_3592_enable_crypt(device
);
403 return tape_3592_disable_crypt(device
);
406 static int tape_3590_sense_medium(struct tape_device
*device
);
409 * IOCTL: Query enryption status
411 static int tape_3592_ioctl_crypt_query(struct tape_device
*device
,
414 DBF_EVENT(6, "tape_3592_ioctl_crypt_query\n");
415 if (!crypt_supported(device
))
417 tape_3590_sense_medium(device
);
418 if (copy_to_user((char __user
*) arg
, &TAPE_3590_CRYPT_INFO(device
),
419 sizeof(TAPE_3590_CRYPT_INFO(device
))))
426 * 3590 IOCTL Overload
429 tape_3590_ioctl(struct tape_device
*device
, unsigned int cmd
, unsigned long arg
)
432 case TAPE390_DISPLAY
: {
433 struct display_struct disp
;
435 if (copy_from_user(&disp
, (char __user
*) arg
, sizeof(disp
)))
438 return tape_std_display(device
, &disp
);
440 case TAPE390_KEKL_SET
:
441 return tape_3592_ioctl_kekl_set(device
, arg
);
442 case TAPE390_KEKL_QUERY
:
443 return tape_3592_ioctl_kekl_query(device
, arg
);
444 case TAPE390_CRYPT_SET
:
445 return tape_3592_ioctl_crypt_set(device
, arg
);
446 case TAPE390_CRYPT_QUERY
:
447 return tape_3592_ioctl_crypt_query(device
, arg
);
449 return -EINVAL
; /* no additional ioctls */
454 * SENSE Medium: Get Sense data about medium state
457 tape_3590_sense_medium(struct tape_device
*device
)
459 struct tape_request
*request
;
461 request
= tape_alloc_request(1, 128);
463 return PTR_ERR(request
);
464 request
->op
= TO_MSEN
;
465 tape_ccw_end(request
->cpaddr
, MEDIUM_SENSE
, 128, request
->cpdata
);
466 return tape_do_io_free(device
, request
);
470 * MTTELL: Tell block. Return the number of block relative to current file.
473 tape_3590_mttell(struct tape_device
*device
, int mt_count
)
478 rc
= tape_std_read_block_id(device
, &block_id
);
481 return block_id
>> 32;
485 * MTSEEK: seek to the specified block.
488 tape_3590_mtseek(struct tape_device
*device
, int count
)
490 struct tape_request
*request
;
492 DBF_EVENT(6, "xsee id: %x\n", count
);
493 request
= tape_alloc_request(3, 4);
495 return PTR_ERR(request
);
496 request
->op
= TO_LBL
;
497 tape_ccw_cc(request
->cpaddr
, MODE_SET_DB
, 1, device
->modeset_byte
);
498 *(__u32
*) request
->cpdata
= count
;
499 tape_ccw_cc(request
->cpaddr
+ 1, LOCATE
, 4, request
->cpdata
);
500 tape_ccw_end(request
->cpaddr
+ 2, NOP
, 0, NULL
);
501 return tape_do_io_free(device
, request
);
505 * Read Opposite Error Recovery Function:
506 * Used, when Read Forward does not work
509 tape_3590_read_opposite(struct tape_device
*device
,
510 struct tape_request
*request
)
512 struct tape_3590_disc_data
*data
;
515 * We have allocated 4 ccws in tape_std_read, so we can now
516 * transform the request to a read backward, followed by a
517 * forward space block.
519 request
->op
= TO_RBA
;
520 tape_ccw_cc(request
->cpaddr
, MODE_SET_DB
, 1, device
->modeset_byte
);
521 data
= device
->discdata
;
522 tape_ccw_cc_idal(request
->cpaddr
+ 1, data
->read_back_op
,
523 device
->char_data
.idal_buf
);
524 tape_ccw_cc(request
->cpaddr
+ 2, FORSPACEBLOCK
, 0, NULL
);
525 tape_ccw_end(request
->cpaddr
+ 3, NOP
, 0, NULL
);
526 DBF_EVENT(6, "xrop ccwg\n");
531 * This should be done after an interrupt with attention bit (0x80)
534 * After a "read attention message" request there are two possible
537 * 1. A unit check is presented, when attention sense is present (e.g. when
538 * a medium has been unloaded). The attention sense comes then
539 * together with the unit check. The recovery action is either "retry"
540 * (in case there is an attention message pending) or "permanent error".
542 * 2. The attention msg is written to the "read subsystem data" buffer.
543 * In this case we probably should print it to the console.
546 tape_3590_read_attmsg(struct tape_device
*device
)
548 struct tape_request
*request
;
551 request
= tape_alloc_request(3, 4096);
553 return PTR_ERR(request
);
554 request
->op
= TO_READ_ATTMSG
;
555 buf
= request
->cpdata
;
556 buf
[0] = PREP_RD_SS_DATA
;
557 buf
[6] = RD_ATTMSG
; /* read att msg */
558 tape_ccw_cc(request
->cpaddr
, PERFORM_SS_FUNC
, 12, buf
);
559 tape_ccw_cc(request
->cpaddr
+ 1, READ_SS_DATA
, 4096 - 12, buf
+ 12);
560 tape_ccw_end(request
->cpaddr
+ 2, NOP
, 0, NULL
);
561 return tape_do_io_free(device
, request
);
565 * These functions are used to schedule follow-up actions from within an
566 * interrupt context (like unsolicited interrupts).
568 struct work_handler_data
{
569 struct tape_device
*device
;
571 struct work_struct work
;
575 tape_3590_work_handler(struct work_struct
*work
)
577 struct work_handler_data
*p
=
578 container_of(work
, struct work_handler_data
, work
);
582 tape_3590_sense_medium(p
->device
);
585 tape_3590_read_attmsg(p
->device
);
588 tape_3592_enable_crypt(p
->device
);
591 tape_3592_disable_crypt(p
->device
);
594 DBF_EVENT(3, "T3590: work handler undefined for "
595 "operation 0x%02x\n", p
->op
);
597 tape_put_device(p
->device
);
602 tape_3590_schedule_work(struct tape_device
*device
, enum tape_op op
)
604 struct work_handler_data
*p
;
606 if ((p
= kzalloc(sizeof(*p
), GFP_ATOMIC
)) == NULL
)
609 INIT_WORK(&p
->work
, tape_3590_work_handler
);
611 p
->device
= tape_get_device_reference(device
);
614 schedule_work(&p
->work
);
618 #ifdef CONFIG_S390_TAPE_BLOCK
622 static struct tape_request
*
623 tape_3590_bread(struct tape_device
*device
, struct request
*req
)
625 struct tape_request
*request
;
627 int count
= 0, start_block
;
631 struct req_iterator iter
;
633 DBF_EVENT(6, "xBREDid:");
634 start_block
= blk_rq_pos(req
) >> TAPEBLOCK_HSEC_S2B
;
635 DBF_EVENT(6, "start_block = %i\n", start_block
);
637 rq_for_each_segment(bv
, req
, iter
)
638 count
+= bv
->bv_len
>> (TAPEBLOCK_HSEC_S2B
+ 9);
640 request
= tape_alloc_request(2 + count
+ 1, 4);
643 request
->op
= TO_BLOCK
;
644 *(__u32
*) request
->cpdata
= start_block
;
645 ccw
= request
->cpaddr
;
646 ccw
= tape_ccw_cc(ccw
, MODE_SET_DB
, 1, device
->modeset_byte
);
649 * We always setup a nop after the mode set ccw. This slot is
650 * used in tape_std_check_locate to insert a locate ccw if the
651 * current tape position doesn't match the start block to be read.
653 ccw
= tape_ccw_cc(ccw
, NOP
, 0, NULL
);
655 rq_for_each_segment(bv
, req
, iter
) {
656 dst
= page_address(bv
->bv_page
) + bv
->bv_offset
;
657 for (off
= 0; off
< bv
->bv_len
; off
+= TAPEBLOCK_HSEC_SIZE
) {
658 ccw
->flags
= CCW_FLAG_CC
;
659 ccw
->cmd_code
= READ_FORWARD
;
660 ccw
->count
= TAPEBLOCK_HSEC_SIZE
;
661 set_normalized_cda(ccw
, (void *) __pa(dst
));
663 dst
+= TAPEBLOCK_HSEC_SIZE
;
665 BUG_ON(off
> bv
->bv_len
);
667 ccw
= tape_ccw_end(ccw
, NOP
, 0, NULL
);
668 DBF_EVENT(6, "xBREDccwg\n");
673 tape_3590_free_bread(struct tape_request
*request
)
677 /* Last ccw is a nop and doesn't need clear_normalized_cda */
678 for (ccw
= request
->cpaddr
; ccw
->flags
& CCW_FLAG_CC
; ccw
++)
679 if (ccw
->cmd_code
== READ_FORWARD
)
680 clear_normalized_cda(ccw
);
681 tape_free_request(request
);
685 * check_locate is called just before the tape request is passed to
686 * the common io layer for execution. It has to check the current
687 * tape position and insert a locate ccw if it doesn't match the
688 * start block for the request.
691 tape_3590_check_locate(struct tape_device
*device
, struct tape_request
*request
)
695 start_block
= (__u32
*) request
->cpdata
;
696 if (*start_block
!= device
->blk_data
.block_position
) {
697 /* Add the start offset of the file to get the real block. */
698 *start_block
+= device
->bof
;
699 tape_ccw_cc(request
->cpaddr
+ 1, LOCATE
, 4, request
->cpdata
);
704 static void tape_3590_med_state_set(struct tape_device
*device
,
705 struct tape_3590_med_sense
*sense
)
707 struct tape390_crypt_info
*c_info
;
709 c_info
= &TAPE_3590_CRYPT_INFO(device
);
711 DBF_EVENT(6, "medium state: %x:%x\n", sense
->macst
, sense
->masst
);
712 switch (sense
->macst
) {
716 tape_med_state_set(device
, MS_UNLOADED
);
717 TAPE_3590_CRYPT_INFO(device
).medium_status
= 0;
721 tape_med_state_set(device
, MS_LOADED
);
724 tape_med_state_set(device
, MS_UNKNOWN
);
727 c_info
->medium_status
|= TAPE390_MEDIUM_LOADED_MASK
;
728 if (sense
->flags
& MSENSE_CRYPT_MASK
) {
729 DBF_EVENT(6, "Medium is encrypted (%04x)\n", sense
->flags
);
730 c_info
->medium_status
|= TAPE390_MEDIUM_ENCRYPTED_MASK
;
732 DBF_EVENT(6, "Medium is not encrypted %04x\n", sense
->flags
);
733 c_info
->medium_status
&= ~TAPE390_MEDIUM_ENCRYPTED_MASK
;
738 * The done handler is called at device/channel end and wakes up the sleeping
742 tape_3590_done(struct tape_device
*device
, struct tape_request
*request
)
744 struct tape_3590_disc_data
*disc_data
;
746 DBF_EVENT(6, "%s done\n", tape_op_verbose
[request
->op
]);
747 disc_data
= device
->discdata
;
749 switch (request
->op
) {
763 tape_med_state_set(device
, MS_LOADED
);
766 tape_med_state_set(device
, MS_UNLOADED
);
767 tape_3590_schedule_work(device
, TO_CRYPT_OFF
);
770 tape_3590_med_state_set(device
, request
->cpdata
);
773 TAPE_3590_CRYPT_INFO(device
).status
774 |= TAPE390_CRYPT_ON_MASK
;
775 *(device
->modeset_byte
) |= 0x03;
778 TAPE_3590_CRYPT_INFO(device
).status
779 &= ~TAPE390_CRYPT_ON_MASK
;
780 *(device
->modeset_byte
) &= ~0x03;
782 case TO_RBI
: /* RBI seems to succeed even without medium loaded. */
783 case TO_NOP
: /* Same to NOP. */
795 return TAPE_IO_SUCCESS
;
799 * This fuction is called, when error recovery was successfull
802 tape_3590_erp_succeded(struct tape_device
*device
, struct tape_request
*request
)
804 DBF_EVENT(3, "Error Recovery successful for %s\n",
805 tape_op_verbose
[request
->op
]);
806 return tape_3590_done(device
, request
);
810 * This fuction is called, when error recovery was not successfull
813 tape_3590_erp_failed(struct tape_device
*device
, struct tape_request
*request
,
814 struct irb
*irb
, int rc
)
816 DBF_EVENT(3, "Error Recovery failed for %s\n",
817 tape_op_verbose
[request
->op
]);
818 tape_dump_sense_dbf(device
, request
, irb
);
823 * Error Recovery do retry
826 tape_3590_erp_retry(struct tape_device
*device
, struct tape_request
*request
,
829 DBF_EVENT(2, "Retry: %s\n", tape_op_verbose
[request
->op
]);
830 tape_dump_sense_dbf(device
, request
, irb
);
831 return TAPE_IO_RETRY
;
835 * Handle unsolicited interrupts
838 tape_3590_unsolicited_irq(struct tape_device
*device
, struct irb
*irb
)
840 if (irb
->scsw
.cmd
.dstat
== DEV_STAT_CHN_END
)
841 /* Probably result of halt ssch */
842 return TAPE_IO_PENDING
;
843 else if (irb
->scsw
.cmd
.dstat
== 0x85)
845 DBF_EVENT(3, "unsol.irq! tape ready: %08x\n", device
->cdev_id
);
846 else if (irb
->scsw
.cmd
.dstat
& DEV_STAT_ATTENTION
) {
847 tape_3590_schedule_work(device
, TO_READ_ATTMSG
);
849 DBF_EVENT(3, "unsol.irq! dev end: %08x\n", device
->cdev_id
);
850 tape_dump_sense_dbf(device
, NULL
, irb
);
852 /* check medium state */
853 tape_3590_schedule_work(device
, TO_MSEN
);
854 return TAPE_IO_SUCCESS
;
858 * Basic Recovery routine
861 tape_3590_erp_basic(struct tape_device
*device
, struct tape_request
*request
,
862 struct irb
*irb
, int rc
)
864 struct tape_3590_sense
*sense
;
866 sense
= (struct tape_3590_sense
*) irb
->ecw
;
868 switch (sense
->bra
) {
870 return tape_3590_erp_failed(device
, request
, irb
, rc
);
872 return tape_3590_erp_succeded(device
, request
);
874 return tape_3590_erp_retry(device
, request
, irb
);
876 return tape_3590_erp_failed(device
, request
, irb
, rc
);
884 * RDL: Read Device (buffered) log
887 tape_3590_erp_read_buf_log(struct tape_device
*device
,
888 struct tape_request
*request
, struct irb
*irb
)
891 * We just do the basic error recovery at the moment (retry).
892 * Perhaps in the future, we read the log and dump it somewhere...
894 return tape_3590_erp_basic(device
, request
, irb
, -EIO
);
901 tape_3590_erp_swap(struct tape_device
*device
, struct tape_request
*request
,
905 * This error recovery should swap the tapes
906 * if the original has a problem. The operation
907 * should proceed with the new tape... this
908 * should probably be done in user space!
910 dev_warn (&device
->cdev
->dev
, "The tape medium must be loaded into a "
911 "different tape unit\n");
912 return tape_3590_erp_basic(device
, request
, irb
, -EIO
);
919 tape_3590_erp_long_busy(struct tape_device
*device
,
920 struct tape_request
*request
, struct irb
*irb
)
922 DBF_EVENT(6, "Device is busy\n");
923 return TAPE_IO_LONG_BUSY
;
927 * SPI: Special Intercept
930 tape_3590_erp_special_interrupt(struct tape_device
*device
,
931 struct tape_request
*request
, struct irb
*irb
)
933 return tape_3590_erp_basic(device
, request
, irb
, -EIO
);
937 * RDA: Read Alternate
940 tape_3590_erp_read_alternate(struct tape_device
*device
,
941 struct tape_request
*request
, struct irb
*irb
)
943 struct tape_3590_disc_data
*data
;
946 * The issued Read Backward or Read Previous command is not
947 * supported by the device
948 * The recovery action should be to issue another command:
949 * Read Revious: if Read Backward is not supported
950 * Read Backward: if Read Previous is not supported
952 data
= device
->discdata
;
953 if (data
->read_back_op
== READ_PREVIOUS
) {
954 DBF_EVENT(2, "(%08x): No support for READ_PREVIOUS command\n",
956 data
->read_back_op
= READ_BACKWARD
;
958 DBF_EVENT(2, "(%08x): No support for READ_BACKWARD command\n",
960 data
->read_back_op
= READ_PREVIOUS
;
962 tape_3590_read_opposite(device
, request
);
963 return tape_3590_erp_retry(device
, request
, irb
);
967 * Error Recovery read opposite
970 tape_3590_erp_read_opposite(struct tape_device
*device
,
971 struct tape_request
*request
, struct irb
*irb
)
973 switch (request
->op
) {
976 * We did read forward, but the data could not be read.
977 * We will read backward and then skip forward again.
979 tape_3590_read_opposite(device
, request
);
980 return tape_3590_erp_retry(device
, request
, irb
);
982 /* We tried to read forward and backward, but hat no success */
983 return tape_3590_erp_failed(device
, request
, irb
, -EIO
);
986 return tape_3590_erp_failed(device
, request
, irb
, -EIO
);
991 * Print an MIM (Media Information Message) (message code f0)
994 tape_3590_print_mim_msg_f0(struct tape_device
*device
, struct irb
*irb
)
996 struct tape_3590_sense
*sense
;
997 char *exception
, *service
;
999 exception
= kmalloc(BUFSIZE
, GFP_ATOMIC
);
1000 service
= kmalloc(BUFSIZE
, GFP_ATOMIC
);
1002 if (!exception
|| !service
)
1005 sense
= (struct tape_3590_sense
*) irb
->ecw
;
1006 /* Exception Message */
1007 switch (sense
->fmt
.f70
.emc
) {
1009 snprintf(exception
, BUFSIZE
, "Data degraded");
1012 snprintf(exception
, BUFSIZE
, "Data degraded in partion %i",
1016 snprintf(exception
, BUFSIZE
, "Medium degraded");
1019 snprintf(exception
, BUFSIZE
, "Medium degraded in partition %i",
1023 snprintf(exception
, BUFSIZE
, "Block 0 Error");
1026 snprintf(exception
, BUFSIZE
, "Medium Exception 0x%02x",
1030 snprintf(exception
, BUFSIZE
, "0x%02x",
1031 sense
->fmt
.f70
.emc
);
1034 /* Service Message */
1035 switch (sense
->fmt
.f70
.smc
) {
1037 snprintf(service
, BUFSIZE
, "Reference Media maintenance "
1038 "procedure %i", sense
->fmt
.f70
.md
);
1041 snprintf(service
, BUFSIZE
, "0x%02x",
1042 sense
->fmt
.f70
.smc
);
1046 dev_warn (&device
->cdev
->dev
, "Tape media information: exception %s, "
1047 "service %s\n", exception
, service
);
1055 * Print an I/O Subsystem Service Information Message (message code f1)
1058 tape_3590_print_io_sim_msg_f1(struct tape_device
*device
, struct irb
*irb
)
1060 struct tape_3590_sense
*sense
;
1061 char *exception
, *service
;
1063 exception
= kmalloc(BUFSIZE
, GFP_ATOMIC
);
1064 service
= kmalloc(BUFSIZE
, GFP_ATOMIC
);
1066 if (!exception
|| !service
)
1069 sense
= (struct tape_3590_sense
*) irb
->ecw
;
1070 /* Exception Message */
1071 switch (sense
->fmt
.f71
.emc
) {
1073 snprintf(exception
, BUFSIZE
, "Effect of failure is unknown");
1076 snprintf(exception
, BUFSIZE
, "CU Exception - no performance "
1080 snprintf(exception
, BUFSIZE
, "CU Exception on channel "
1081 "interface 0x%02x", sense
->fmt
.f71
.md
[0]);
1084 snprintf(exception
, BUFSIZE
, "CU Exception on device path "
1085 "0x%02x", sense
->fmt
.f71
.md
[0]);
1088 snprintf(exception
, BUFSIZE
, "CU Exception on library path "
1089 "0x%02x", sense
->fmt
.f71
.md
[0]);
1092 snprintf(exception
, BUFSIZE
, "CU Exception on node 0x%02x",
1093 sense
->fmt
.f71
.md
[0]);
1096 snprintf(exception
, BUFSIZE
, "CU Exception on partition "
1097 "0x%02x", sense
->fmt
.f71
.md
[0]);
1100 snprintf(exception
, BUFSIZE
, "0x%02x",
1101 sense
->fmt
.f71
.emc
);
1103 /* Service Message */
1104 switch (sense
->fmt
.f71
.smc
) {
1106 snprintf(service
, BUFSIZE
, "Repair impact is unknown");
1109 snprintf(service
, BUFSIZE
, "Repair will not impact cu "
1113 if (sense
->fmt
.f71
.mdf
== 0)
1114 snprintf(service
, BUFSIZE
, "Repair will disable node "
1115 "0x%x on CU", sense
->fmt
.f71
.md
[1]);
1117 snprintf(service
, BUFSIZE
, "Repair will disable "
1118 "nodes (0x%x-0x%x) on CU", sense
->fmt
.f71
.md
[1],
1119 sense
->fmt
.f71
.md
[2]);
1122 if (sense
->fmt
.f71
.mdf
== 0)
1123 snprintf(service
, BUFSIZE
, "Repair will disable "
1124 "channel path 0x%x on CU",
1125 sense
->fmt
.f71
.md
[1]);
1127 snprintf(service
, BUFSIZE
, "Repair will disable cannel"
1128 " paths (0x%x-0x%x) on CU",
1129 sense
->fmt
.f71
.md
[1], sense
->fmt
.f71
.md
[2]);
1132 if (sense
->fmt
.f71
.mdf
== 0)
1133 snprintf(service
, BUFSIZE
, "Repair will disable device"
1134 " path 0x%x on CU", sense
->fmt
.f71
.md
[1]);
1136 snprintf(service
, BUFSIZE
, "Repair will disable device"
1137 " paths (0x%x-0x%x) on CU",
1138 sense
->fmt
.f71
.md
[1], sense
->fmt
.f71
.md
[2]);
1141 if (sense
->fmt
.f71
.mdf
== 0)
1142 snprintf(service
, BUFSIZE
, "Repair will disable "
1143 "library path 0x%x on CU",
1144 sense
->fmt
.f71
.md
[1]);
1146 snprintf(service
, BUFSIZE
, "Repair will disable "
1147 "library paths (0x%x-0x%x) on CU",
1148 sense
->fmt
.f71
.md
[1], sense
->fmt
.f71
.md
[2]);
1151 snprintf(service
, BUFSIZE
, "Repair will disable access to CU");
1154 snprintf(service
, BUFSIZE
, "0x%02x",
1155 sense
->fmt
.f71
.smc
);
1158 dev_warn (&device
->cdev
->dev
, "I/O subsystem information: exception"
1159 " %s, service %s\n", exception
, service
);
1166 * Print an Device Subsystem Service Information Message (message code f2)
1169 tape_3590_print_dev_sim_msg_f2(struct tape_device
*device
, struct irb
*irb
)
1171 struct tape_3590_sense
*sense
;
1172 char *exception
, *service
;
1174 exception
= kmalloc(BUFSIZE
, GFP_ATOMIC
);
1175 service
= kmalloc(BUFSIZE
, GFP_ATOMIC
);
1177 if (!exception
|| !service
)
1180 sense
= (struct tape_3590_sense
*) irb
->ecw
;
1181 /* Exception Message */
1182 switch (sense
->fmt
.f71
.emc
) {
1184 snprintf(exception
, BUFSIZE
, "Effect of failure is unknown");
1187 snprintf(exception
, BUFSIZE
, "DV Exception - no performance"
1191 snprintf(exception
, BUFSIZE
, "DV Exception on channel "
1192 "interface 0x%02x", sense
->fmt
.f71
.md
[0]);
1195 snprintf(exception
, BUFSIZE
, "DV Exception on loader 0x%02x",
1196 sense
->fmt
.f71
.md
[0]);
1199 snprintf(exception
, BUFSIZE
, "DV Exception on message display"
1200 " 0x%02x", sense
->fmt
.f71
.md
[0]);
1203 snprintf(exception
, BUFSIZE
, "DV Exception in tape path");
1206 snprintf(exception
, BUFSIZE
, "DV Exception in drive");
1209 snprintf(exception
, BUFSIZE
, "0x%02x",
1210 sense
->fmt
.f71
.emc
);
1212 /* Service Message */
1213 switch (sense
->fmt
.f71
.smc
) {
1215 snprintf(service
, BUFSIZE
, "Repair impact is unknown");
1218 snprintf(service
, BUFSIZE
, "Repair will not impact device "
1222 if (sense
->fmt
.f71
.mdf
== 0)
1223 snprintf(service
, BUFSIZE
, "Repair will disable "
1224 "channel path 0x%x on DV",
1225 sense
->fmt
.f71
.md
[1]);
1227 snprintf(service
, BUFSIZE
, "Repair will disable "
1228 "channel path (0x%x-0x%x) on DV",
1229 sense
->fmt
.f71
.md
[1], sense
->fmt
.f71
.md
[2]);
1232 if (sense
->fmt
.f71
.mdf
== 0)
1233 snprintf(service
, BUFSIZE
, "Repair will disable "
1234 "interface 0x%x on DV", sense
->fmt
.f71
.md
[1]);
1236 snprintf(service
, BUFSIZE
, "Repair will disable "
1237 "interfaces (0x%x-0x%x) on DV",
1238 sense
->fmt
.f71
.md
[1], sense
->fmt
.f71
.md
[2]);
1241 if (sense
->fmt
.f71
.mdf
== 0)
1242 snprintf(service
, BUFSIZE
, "Repair will disable loader"
1243 " 0x%x on DV", sense
->fmt
.f71
.md
[1]);
1245 snprintf(service
, BUFSIZE
, "Repair will disable loader"
1246 " (0x%x-0x%x) on DV",
1247 sense
->fmt
.f71
.md
[1], sense
->fmt
.f71
.md
[2]);
1250 snprintf(service
, BUFSIZE
, "Repair will disable access to DV");
1253 if (sense
->fmt
.f71
.mdf
== 0)
1254 snprintf(service
, BUFSIZE
, "Repair will disable "
1255 "message display 0x%x on DV",
1256 sense
->fmt
.f71
.md
[1]);
1258 snprintf(service
, BUFSIZE
, "Repair will disable "
1259 "message displays (0x%x-0x%x) on DV",
1260 sense
->fmt
.f71
.md
[1], sense
->fmt
.f71
.md
[2]);
1263 snprintf(service
, BUFSIZE
, "Clean DV");
1266 snprintf(service
, BUFSIZE
, "0x%02x",
1267 sense
->fmt
.f71
.smc
);
1270 dev_warn (&device
->cdev
->dev
, "Device subsystem information: exception"
1271 " %s, service %s\n", exception
, service
);
1278 * Print standard ERA Message
1281 tape_3590_print_era_msg(struct tape_device
*device
, struct irb
*irb
)
1283 struct tape_3590_sense
*sense
;
1285 sense
= (struct tape_3590_sense
*) irb
->ecw
;
1288 if ((sense
->mc
> 0) && (sense
->mc
< TAPE_3590_MAX_MSG
)) {
1289 if (tape_3590_msg
[sense
->mc
] != NULL
)
1290 dev_warn (&device
->cdev
->dev
, "The tape unit has "
1291 "issued sense message %s\n",
1292 tape_3590_msg
[sense
->mc
]);
1294 dev_warn (&device
->cdev
->dev
, "The tape unit has "
1295 "issued an unknown sense message code 0x%x\n",
1299 if (sense
->mc
== 0xf0) {
1300 /* Standard Media Information Message */
1301 dev_warn (&device
->cdev
->dev
, "MIM SEV=%i, MC=%02x, ES=%x/%x, "
1302 "RC=%02x-%04x-%02x\n", sense
->fmt
.f70
.sev
, sense
->mc
,
1303 sense
->fmt
.f70
.emc
, sense
->fmt
.f70
.smc
,
1304 sense
->fmt
.f70
.refcode
, sense
->fmt
.f70
.mid
,
1305 sense
->fmt
.f70
.fid
);
1306 tape_3590_print_mim_msg_f0(device
, irb
);
1309 if (sense
->mc
== 0xf1) {
1310 /* Standard I/O Subsystem Service Information Message */
1311 dev_warn (&device
->cdev
->dev
, "IOSIM SEV=%i, DEVTYPE=3590/%02x,"
1312 " MC=%02x, ES=%x/%x, REF=0x%04x-0x%04x-0x%04x\n",
1313 sense
->fmt
.f71
.sev
, device
->cdev
->id
.dev_model
,
1314 sense
->mc
, sense
->fmt
.f71
.emc
, sense
->fmt
.f71
.smc
,
1315 sense
->fmt
.f71
.refcode1
, sense
->fmt
.f71
.refcode2
,
1316 sense
->fmt
.f71
.refcode3
);
1317 tape_3590_print_io_sim_msg_f1(device
, irb
);
1320 if (sense
->mc
== 0xf2) {
1321 /* Standard Device Service Information Message */
1322 dev_warn (&device
->cdev
->dev
, "DEVSIM SEV=%i, DEVTYPE=3590/%02x"
1323 ", MC=%02x, ES=%x/%x, REF=0x%04x-0x%04x-0x%04x\n",
1324 sense
->fmt
.f71
.sev
, device
->cdev
->id
.dev_model
,
1325 sense
->mc
, sense
->fmt
.f71
.emc
, sense
->fmt
.f71
.smc
,
1326 sense
->fmt
.f71
.refcode1
, sense
->fmt
.f71
.refcode2
,
1327 sense
->fmt
.f71
.refcode3
);
1328 tape_3590_print_dev_sim_msg_f2(device
, irb
);
1331 if (sense
->mc
== 0xf3) {
1332 /* Standard Library Service Information Message */
1335 dev_warn (&device
->cdev
->dev
, "The tape unit has issued an unknown "
1336 "sense message code %x\n", sense
->mc
);
1339 static int tape_3590_crypt_error(struct tape_device
*device
,
1340 struct tape_request
*request
, struct irb
*irb
)
1348 sense
= ((struct tape_3590_sense
*) irb
->ecw
)->fmt
.data
;
1349 bus_id
= dev_name(&device
->cdev
->dev
);
1351 drv_rc
= *((u32
*) &sense
[5]) & 0xffffff;
1353 ekm_rc2
= *((u16
*) &sense
[10]);
1354 if ((cu_rc
== 0) && (ekm_rc2
== 0xee31))
1355 /* key not defined on EKM */
1356 return tape_3590_erp_basic(device
, request
, irb
, -EKEYREJECTED
);
1357 if ((cu_rc
== 1) || (cu_rc
== 2))
1358 /* No connection to EKM */
1359 return tape_3590_erp_basic(device
, request
, irb
, -ENOTCONN
);
1361 dev_err (&device
->cdev
->dev
, "The tape unit failed to obtain the "
1362 "encryption key from EKM\n");
1364 return tape_3590_erp_basic(device
, request
, irb
, -ENOKEY
);
1368 * 3590 error Recovery routine:
1369 * If possible, it tries to recover from the error. If this is not possible,
1370 * inform the user about the problem.
1373 tape_3590_unit_check(struct tape_device
*device
, struct tape_request
*request
,
1376 struct tape_3590_sense
*sense
;
1379 #ifdef CONFIG_S390_TAPE_BLOCK
1380 if (request
->op
== TO_BLOCK
) {
1382 * Recovery for block device requests. Set the block_position
1383 * to something invalid and retry.
1385 device
->blk_data
.block_position
= -1;
1386 if (request
->retries
-- <= 0)
1387 return tape_3590_erp_failed(device
, request
, irb
, -EIO
);
1389 return tape_3590_erp_retry(device
, request
, irb
);
1393 sense
= (struct tape_3590_sense
*) irb
->ecw
;
1395 DBF_EVENT(6, "Unit Check: RQC = %x\n", sense
->rc_rqc
);
1398 * First check all RC-QRCs where we want to do something special
1399 * - "break": basic error recovery is done
1400 * - "goto out:": just print error message if available
1403 switch (sense
->rc_rqc
) {
1406 tape_3590_print_era_msg(device
, irb
);
1407 return tape_3590_erp_read_buf_log(device
, request
, irb
);
1410 tape_3590_print_era_msg(device
, irb
);
1411 return tape_3590_erp_read_alternate(device
, request
, irb
);
1415 tape_3590_print_era_msg(device
, irb
);
1416 return tape_3590_erp_special_interrupt(device
, request
, irb
);
1418 return tape_3590_crypt_error(device
, request
, irb
);
1421 DBF_EVENT(2, "(%08x): Backward at Beginning of Partition\n",
1423 return tape_3590_erp_basic(device
, request
, irb
, -ENOSPC
);
1425 DBF_EVENT(2, "(%08x): Forward at End of Partition\n",
1427 return tape_3590_erp_basic(device
, request
, irb
, -ENOSPC
);
1429 DBF_EVENT(2, "(%08x): End of Data Mark\n", device
->cdev_id
);
1430 return tape_3590_erp_basic(device
, request
, irb
, -ENOSPC
);
1433 DBF_EVENT(2, "(%08x): Rewind Unload initiated\n",
1435 return tape_3590_erp_basic(device
, request
, irb
, -EIO
);
1437 DBF_EVENT(2, "(%08x): Rewind Unload complete\n",
1439 tape_med_state_set(device
, MS_UNLOADED
);
1440 tape_3590_schedule_work(device
, TO_CRYPT_OFF
);
1441 return tape_3590_erp_basic(device
, request
, irb
, 0);
1445 * print additional msg since default msg
1446 * "device intervention" is not very meaningfull
1448 tape_med_state_set(device
, MS_UNLOADED
);
1449 tape_3590_schedule_work(device
, TO_CRYPT_OFF
);
1450 return tape_3590_erp_basic(device
, request
, irb
, -ENOMEDIUM
);
1451 case 0x4012: /* Device Long Busy */
1452 /* XXX: Also use long busy handling here? */
1453 DBF_EVENT(6, "(%08x): LONG BUSY\n", device
->cdev_id
);
1454 tape_3590_print_era_msg(device
, irb
);
1455 return tape_3590_erp_basic(device
, request
, irb
, -EBUSY
);
1457 DBF_EVENT(6, "(%08x): Crypto LONG BUSY\n", device
->cdev_id
);
1458 return tape_3590_erp_long_busy(device
, request
, irb
);
1461 if (sense
->rac
== 0xd0) {
1463 tape_3590_print_era_msg(device
, irb
);
1464 return tape_3590_erp_swap(device
, request
, irb
);
1466 if (sense
->rac
== 0x26) {
1468 tape_3590_print_era_msg(device
, irb
);
1469 return tape_3590_erp_read_opposite(device
, request
,
1472 return tape_3590_erp_basic(device
, request
, irb
, -EIO
);
1479 tape_3590_print_era_msg(device
, irb
);
1480 return tape_3590_erp_swap(device
, request
, irb
);
1484 return tape_3590_erp_basic(device
, request
, irb
, -EMEDIUMTYPE
);
1488 tape_med_state_set(device
, MS_UNLOADED
);
1489 tape_3590_schedule_work(device
, TO_CRYPT_OFF
);
1490 return tape_3590_erp_basic(device
, request
, irb
, -ENOMEDIUM
);
1493 return tape_3590_erp_basic(device
, request
, irb
, -EMEDIUMTYPE
);
1496 return tape_3590_erp_basic(device
, request
, irb
, -EPERM
);
1498 dev_warn (&device
->cdev
->dev
, "A different host has privileged"
1499 " access to the tape unit\n");
1500 return tape_3590_erp_basic(device
, request
, irb
, -EPERM
);
1502 return tape_3590_erp_basic(device
, request
, irb
, -EIO
);
1507 * 3590 interrupt handler:
1510 tape_3590_irq(struct tape_device
*device
, struct tape_request
*request
,
1513 if (request
== NULL
)
1514 return tape_3590_unsolicited_irq(device
, irb
);
1516 if ((irb
->scsw
.cmd
.dstat
& DEV_STAT_UNIT_EXCEP
) &&
1517 (irb
->scsw
.cmd
.dstat
& DEV_STAT_DEV_END
) &&
1518 (request
->op
== TO_WRI
)) {
1519 /* Write at end of volume */
1520 DBF_EVENT(2, "End of volume\n");
1521 return tape_3590_erp_failed(device
, request
, irb
, -ENOSPC
);
1524 if (irb
->scsw
.cmd
.dstat
& DEV_STAT_UNIT_CHECK
)
1525 return tape_3590_unit_check(device
, request
, irb
);
1527 if (irb
->scsw
.cmd
.dstat
& DEV_STAT_DEV_END
) {
1528 if (irb
->scsw
.cmd
.dstat
== DEV_STAT_UNIT_EXCEP
) {
1529 if (request
->op
== TO_FSB
|| request
->op
== TO_BSB
)
1532 DBF_EVENT(5, "Unit Exception!\n");
1535 return tape_3590_done(device
, request
);
1538 if (irb
->scsw
.cmd
.dstat
& DEV_STAT_CHN_END
) {
1539 DBF_EVENT(2, "cannel end\n");
1540 return TAPE_IO_PENDING
;
1543 if (irb
->scsw
.cmd
.dstat
& DEV_STAT_ATTENTION
) {
1544 DBF_EVENT(2, "Unit Attention when busy..\n");
1545 return TAPE_IO_PENDING
;
1548 DBF_EVENT(6, "xunknownirq\n");
1549 tape_dump_sense_dbf(device
, request
, irb
);
1550 return TAPE_IO_STOP
;
1554 static int tape_3590_read_dev_chars(struct tape_device
*device
,
1555 struct tape_3590_rdc_data
*rdc_data
)
1558 struct tape_request
*request
;
1560 request
= tape_alloc_request(1, sizeof(*rdc_data
));
1561 if (IS_ERR(request
))
1562 return PTR_ERR(request
);
1563 request
->op
= TO_RDC
;
1564 tape_ccw_end(request
->cpaddr
, CCW_CMD_RDC
, sizeof(*rdc_data
),
1566 rc
= tape_do_io(device
, request
);
1568 memcpy(rdc_data
, request
->cpdata
, sizeof(*rdc_data
));
1569 tape_free_request(request
);
1574 * Setup device function
1577 tape_3590_setup_device(struct tape_device
*device
)
1580 struct tape_3590_disc_data
*data
;
1581 struct tape_3590_rdc_data
*rdc_data
;
1583 DBF_EVENT(6, "3590 device setup\n");
1584 data
= kzalloc(sizeof(struct tape_3590_disc_data
), GFP_KERNEL
| GFP_DMA
);
1587 data
->read_back_op
= READ_PREVIOUS
;
1588 device
->discdata
= data
;
1590 rdc_data
= kmalloc(sizeof(*rdc_data
), GFP_KERNEL
| GFP_DMA
);
1595 rc
= tape_3590_read_dev_chars(device
, rdc_data
);
1597 DBF_LH(3, "Read device characteristics failed!\n");
1600 rc
= tape_std_assign(device
);
1603 if (rdc_data
->data
[31] == 0x13) {
1604 data
->crypt_info
.capability
|= TAPE390_CRYPT_SUPPORTED_MASK
;
1605 tape_3592_disable_crypt(device
);
1607 DBF_EVENT(6, "Device has NO crypto support\n");
1609 /* Try to find out if medium is loaded */
1610 rc
= tape_3590_sense_medium(device
);
1612 DBF_LH(3, "3590 medium sense returned %d\n", rc
);
1625 * Cleanup device function
1628 tape_3590_cleanup_device(struct tape_device
*device
)
1630 flush_scheduled_work();
1631 tape_std_unassign(device
);
1633 kfree(device
->discdata
);
1634 device
->discdata
= NULL
;
1638 * List of 3590 magnetic tape commands.
1640 static tape_mtop_fn tape_3590_mtop
[TAPE_NR_MTOPS
] = {
1641 [MTRESET
] = tape_std_mtreset
,
1642 [MTFSF
] = tape_std_mtfsf
,
1643 [MTBSF
] = tape_std_mtbsf
,
1644 [MTFSR
] = tape_std_mtfsr
,
1645 [MTBSR
] = tape_std_mtbsr
,
1646 [MTWEOF
] = tape_std_mtweof
,
1647 [MTREW
] = tape_std_mtrew
,
1648 [MTOFFL
] = tape_std_mtoffl
,
1649 [MTNOP
] = tape_std_mtnop
,
1650 [MTRETEN
] = tape_std_mtreten
,
1651 [MTBSFM
] = tape_std_mtbsfm
,
1652 [MTFSFM
] = tape_std_mtfsfm
,
1653 [MTEOM
] = tape_std_mteom
,
1654 [MTERASE
] = tape_std_mterase
,
1658 [MTSETBLK
] = tape_std_mtsetblk
,
1659 [MTSETDENSITY
] = NULL
,
1660 [MTSEEK
] = tape_3590_mtseek
,
1661 [MTTELL
] = tape_3590_mttell
,
1662 [MTSETDRVBUFFER
] = NULL
,
1668 [MTLOAD
] = tape_std_mtload
,
1669 [MTUNLOAD
] = tape_std_mtunload
,
1670 [MTCOMPRESSION
] = tape_std_mtcompression
,
1676 * Tape discipline structure for 3590.
1678 static struct tape_discipline tape_discipline_3590
= {
1679 .owner
= THIS_MODULE
,
1680 .setup_device
= tape_3590_setup_device
,
1681 .cleanup_device
= tape_3590_cleanup_device
,
1682 .process_eov
= tape_std_process_eov
,
1683 .irq
= tape_3590_irq
,
1684 .read_block
= tape_std_read_block
,
1685 .write_block
= tape_std_write_block
,
1686 #ifdef CONFIG_S390_TAPE_BLOCK
1687 .bread
= tape_3590_bread
,
1688 .free_bread
= tape_3590_free_bread
,
1689 .check_locate
= tape_3590_check_locate
,
1691 .ioctl_fn
= tape_3590_ioctl
,
1692 .mtop_array
= tape_3590_mtop
1695 static struct ccw_device_id tape_3590_ids
[] = {
1696 {CCW_DEVICE_DEVTYPE(0x3590, 0, 0x3590, 0), .driver_info
= tape_3590
},
1697 {CCW_DEVICE_DEVTYPE(0x3592, 0, 0x3592, 0), .driver_info
= tape_3592
},
1698 { /* end of list */ }
1702 tape_3590_online(struct ccw_device
*cdev
)
1704 return tape_generic_online(dev_get_drvdata(&cdev
->dev
),
1705 &tape_discipline_3590
);
1708 static struct ccw_driver tape_3590_driver
= {
1709 .name
= "tape_3590",
1710 .owner
= THIS_MODULE
,
1711 .ids
= tape_3590_ids
,
1712 .probe
= tape_generic_probe
,
1713 .remove
= tape_generic_remove
,
1714 .set_offline
= tape_generic_offline
,
1715 .set_online
= tape_3590_online
,
1716 .freeze
= tape_generic_pm_suspend
,
1720 * Setup discipline structure.
1723 tape_3590_init(void)
1727 TAPE_DBF_AREA
= debug_register("tape_3590", 2, 2, 4 * sizeof(long));
1728 debug_register_view(TAPE_DBF_AREA
, &debug_sprintf_view
);
1729 #ifdef DBF_LIKE_HELL
1730 debug_set_level(TAPE_DBF_AREA
, 6);
1733 DBF_EVENT(3, "3590 init\n");
1734 /* Register driver for 3590 tapes. */
1735 rc
= ccw_driver_register(&tape_3590_driver
);
1737 DBF_EVENT(3, "3590 init failed\n");
1739 DBF_EVENT(3, "3590 registered\n");
1744 tape_3590_exit(void)
1746 ccw_driver_unregister(&tape_3590_driver
);
1748 debug_unregister(TAPE_DBF_AREA
);
1751 MODULE_DEVICE_TABLE(ccw
, tape_3590_ids
);
1752 MODULE_AUTHOR("(C) 2001,2006 IBM Corporation");
1753 MODULE_DESCRIPTION("Linux on zSeries channel attached 3590 tape device driver");
1754 MODULE_LICENSE("GPL");
1756 module_init(tape_3590_init
);
1757 module_exit(tape_3590_exit
);