2 * Merged with mainline ieee80211.h in Aug 2004. Original ieee802_11
3 * remains copyright by the original authors
5 * Portions of the merged code are based on Host AP (software wireless
6 * LAN access point) driver for Intersil Prism2/2.5/3.
8 * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
10 * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
12 * Adaption to a generic IEEE 802.11 stack by James Ketrenos
13 * <jketreno@linux.intel.com>
14 * Copyright (c) 2004, Intel Corporation
16 * Modified for Realtek's wi-fi cards by Andrea Merello
17 * <andreamrl@tiscali.it>
19 * This program is free software; you can redistribute it and/or modify
20 * it under the terms of the GNU General Public License version 2 as
21 * published by the Free Software Foundation. See README and COPYING for
26 #include <linux/if_ether.h> /* ETH_ALEN */
27 #include <linux/kernel.h> /* ARRAY_SIZE */
28 #include <linux/version.h>
29 #include <linux/jiffies.h>
30 #include <linux/timer.h>
31 #include <linux/sched.h>
32 #include <linux/wireless.h>
33 #include <linux/ieee80211.h>
35 #define KEY_TYPE_NA 0x0
36 #define KEY_TYPE_WEP40 0x1
37 #define KEY_TYPE_TKIP 0x2
38 #define KEY_TYPE_CCMP 0x4
39 #define KEY_TYPE_WEP104 0x5
43 #define MGMT_QUEUE_NUM 5
46 #define IEEE_CMD_SET_WPA_PARAM 1
47 #define IEEE_CMD_SET_WPA_IE 2
48 #define IEEE_CMD_SET_ENCRYPTION 3
49 #define IEEE_CMD_MLME 4
51 #define IEEE_PARAM_WPA_ENABLED 1
52 #define IEEE_PARAM_TKIP_COUNTERMEASURES 2
53 #define IEEE_PARAM_DROP_UNENCRYPTED 3
54 #define IEEE_PARAM_PRIVACY_INVOKED 4
55 #define IEEE_PARAM_AUTH_ALGS 5
56 #define IEEE_PARAM_IEEE_802_1X 6
57 //It should consistent with the driver_XXX.c
59 #define IEEE_PARAM_WPAX_SELECT 7
60 //Added for notify the encryption type selection
62 #define IEEE_PROTO_WPA 1
63 #define IEEE_PROTO_RSN 2
64 //Added for notify the encryption type selection
66 #define IEEE_WPAX_USEGROUP 0
67 #define IEEE_WPAX_WEP40 1
68 #define IEEE_WPAX_TKIP 2
69 #define IEEE_WPAX_WRAP 3
70 #define IEEE_WPAX_CCMP 4
71 #define IEEE_WPAX_WEP104 5
73 #define IEEE_KEY_MGMT_IEEE8021X 1
74 #define IEEE_KEY_MGMT_PSK 2
78 #define IEEE_MLME_STA_DEAUTH 1
79 #define IEEE_MLME_STA_DISASSOC 2
82 #define IEEE_CRYPT_ERR_UNKNOWN_ALG 2
83 #define IEEE_CRYPT_ERR_UNKNOWN_ADDR 3
84 #define IEEE_CRYPT_ERR_CRYPT_INIT_FAILED 4
85 #define IEEE_CRYPT_ERR_KEY_SET_FAILED 5
86 #define IEEE_CRYPT_ERR_TX_KEY_SET_FAILED 6
87 #define IEEE_CRYPT_ERR_CARD_CONF_FAILED 7
90 #define IEEE_CRYPT_ALG_NAME_LEN 16
93 typedef struct ieee_param
{
95 u8 sta_addr
[ETH_ALEN
];
111 u8 alg
[IEEE_CRYPT_ALG_NAME_LEN
];
115 u8 seq
[8]; /* sequence counter (set: RX, get: TX) */
124 #define MSECS(t) msecs_to_jiffies(t)
125 #define msleep_interruptible_rtl msleep_interruptible
127 #define IEEE80211_DATA_LEN 2304
128 /* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
131 The figure in section 7.1.2 suggests a body size of up to 2312
132 bytes is allowed, which is a bit confusing, I suspect this
133 represents the 2304 bytes of real data, plus a possible 8 bytes of
134 WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
136 #define IEEE80211_3ADDR_LEN 24
137 #define IEEE80211_4ADDR_LEN 30
138 #define IEEE80211_FCS_LEN 4
139 #define IEEE80211_HLEN IEEE80211_4ADDR_LEN
140 #define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)
141 #define IEEE80211_MGMT_HDR_LEN 24
142 #define IEEE80211_DATA_HDR3_LEN 24
143 #define IEEE80211_DATA_HDR4_LEN 30
145 #define MIN_FRAG_THRESHOLD 256U
146 #define MAX_FRAG_THRESHOLD 2346U
148 /* Frame control field constants */
149 #define IEEE80211_FCTL_DSTODS 0x0300 //added by david
150 #define IEEE80211_FCTL_WEP 0x4000
154 #ifdef CONFIG_IEEE80211_DEBUG
155 extern u32 ieee80211_debug_level
;
156 #define IEEE80211_DEBUG(level, fmt, args...) \
157 do { if (ieee80211_debug_level & (level)) \
158 printk(KERN_DEBUG "ieee80211: %c %s " fmt, \
159 in_interrupt() ? 'I' : 'U', __func__ , ## args); } while (0)
161 #define IEEE80211_DEBUG(level, fmt, args...) do {} while (0)
162 #endif /* CONFIG_IEEE80211_DEBUG */
164 #define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x"
165 #define MAC_ARG(x) ((u8 *)(x))[0], ((u8 *)(x))[1], ((u8 *)(x))[2], \
166 ((u8 *)(x))[3], ((u8 *)(x))[4], ((u8 *)(x))[5]
169 * To use the debug system;
171 * If you are defining a new debug classification, simply add it to the #define
172 * list here in the form of:
174 * #define IEEE80211_DL_xxxx VALUE
176 * shifting value to the left one bit from the previous entry. xxxx should be
177 * the name of the classification (for example, WEP)
179 * You then need to either add a IEEE80211_xxxx_DEBUG() macro definition for your
180 * classification, or use IEEE80211_DEBUG(IEEE80211_DL_xxxx, ...) whenever you want
181 * to send output to that classification.
183 * To add your debug level to the list of levels seen when you perform
185 * % cat /proc/net/ipw/debug_level
187 * you simply need to add your entry to the ipw_debug_levels array.
189 * If you do not see debug_level in /proc/net/ipw then you do not have
190 * CONFIG_IEEE80211_DEBUG defined in your kernel configuration
194 #define IEEE80211_DL_INFO (1<<0)
195 #define IEEE80211_DL_WX (1<<1)
196 #define IEEE80211_DL_SCAN (1<<2)
197 #define IEEE80211_DL_STATE (1<<3)
198 #define IEEE80211_DL_MGMT (1<<4)
199 #define IEEE80211_DL_FRAG (1<<5)
200 #define IEEE80211_DL_EAP (1<<6)
201 #define IEEE80211_DL_DROP (1<<7)
203 #define IEEE80211_DL_TX (1<<8)
204 #define IEEE80211_DL_RX (1<<9)
206 #define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a)
207 #define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a)
208 #define IEEE80211_DEBUG_INFO(f, a...) IEEE80211_DEBUG(IEEE80211_DL_INFO, f, ## a)
210 #define IEEE80211_DEBUG_WX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_WX, f, ## a)
211 #define IEEE80211_DEBUG_SCAN(f, a...) IEEE80211_DEBUG(IEEE80211_DL_SCAN, f, ## a)
212 //#define IEEE_DEBUG_SCAN IEEE80211_WARNING
213 #define IEEE80211_DEBUG_STATE(f, a...) IEEE80211_DEBUG(IEEE80211_DL_STATE, f, ## a)
214 #define IEEE80211_DEBUG_MGMT(f, a...) IEEE80211_DEBUG(IEEE80211_DL_MGMT, f, ## a)
215 #define IEEE80211_DEBUG_FRAG(f, a...) IEEE80211_DEBUG(IEEE80211_DL_FRAG, f, ## a)
216 #define IEEE80211_DEBUG_EAP(f, a...) IEEE80211_DEBUG(IEEE80211_DL_EAP, f, ## a)
217 #define IEEE80211_DEBUG_DROP(f, a...) IEEE80211_DEBUG(IEEE80211_DL_DROP, f, ## a)
218 #define IEEE80211_DEBUG_TX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_TX, f, ## a)
219 #define IEEE80211_DEBUG_RX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_RX, f, ## a)
220 #include <linux/netdevice.h>
221 #include <linux/wireless.h>
222 #include <linux/if_arp.h> /* ARPHRD_ETHER */
225 #define WIRELESS_SPY // enable iwspy support
227 #include <net/iw_handler.h> // new driver API
230 #define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
231 #endif /* ETH_P_PAE */
233 #define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */
235 #ifndef ETH_P_80211_RAW
236 #define ETH_P_80211_RAW (ETH_P_ECONET + 1)
239 /* IEEE 802.11 defines */
241 #define P80211_OUI_LEN 3
243 struct ieee80211_snap_hdr
{
245 u8 dsap
; /* always 0xAA */
246 u8 ssap
; /* always 0xAA */
247 u8 ctrl
; /* always 0x03 */
248 u8 oui
[P80211_OUI_LEN
]; /* organizational universal id */
250 } __attribute__ ((packed
));
252 #define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
254 #define WLAN_FC_GET_TYPE(fc) ((fc) & IEEE80211_FCTL_FTYPE)
255 #define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE)
257 #define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG)
258 #define WLAN_GET_SEQ_SEQ(seq) ((seq) & IEEE80211_SCTL_SEQ)
260 #define WLAN_CAPABILITY_BSS (1<<0)
261 #define WLAN_CAPABILITY_SHORT_SLOT (1<<10)
263 #define IEEE80211_STATMASK_SIGNAL (1<<0)
264 #define IEEE80211_STATMASK_RSSI (1<<1)
265 #define IEEE80211_STATMASK_NOISE (1<<2)
266 #define IEEE80211_STATMASK_RATE (1<<3)
267 #define IEEE80211_STATMASK_WEMASK 0x7
270 #define IEEE80211_CCK_MODULATION (1<<0)
271 #define IEEE80211_OFDM_MODULATION (1<<1)
273 #define IEEE80211_24GHZ_BAND (1<<0)
274 #define IEEE80211_52GHZ_BAND (1<<1)
276 #define IEEE80211_CCK_RATE_LEN 4
277 #define IEEE80211_CCK_RATE_1MB 0x02
278 #define IEEE80211_CCK_RATE_2MB 0x04
279 #define IEEE80211_CCK_RATE_5MB 0x0B
280 #define IEEE80211_CCK_RATE_11MB 0x16
281 #define IEEE80211_OFDM_RATE_LEN 8
282 #define IEEE80211_OFDM_RATE_6MB 0x0C
283 #define IEEE80211_OFDM_RATE_9MB 0x12
284 #define IEEE80211_OFDM_RATE_12MB 0x18
285 #define IEEE80211_OFDM_RATE_18MB 0x24
286 #define IEEE80211_OFDM_RATE_24MB 0x30
287 #define IEEE80211_OFDM_RATE_36MB 0x48
288 #define IEEE80211_OFDM_RATE_48MB 0x60
289 #define IEEE80211_OFDM_RATE_54MB 0x6C
290 #define IEEE80211_BASIC_RATE_MASK 0x80
292 #define IEEE80211_CCK_RATE_1MB_MASK (1<<0)
293 #define IEEE80211_CCK_RATE_2MB_MASK (1<<1)
294 #define IEEE80211_CCK_RATE_5MB_MASK (1<<2)
295 #define IEEE80211_CCK_RATE_11MB_MASK (1<<3)
296 #define IEEE80211_OFDM_RATE_6MB_MASK (1<<4)
297 #define IEEE80211_OFDM_RATE_9MB_MASK (1<<5)
298 #define IEEE80211_OFDM_RATE_12MB_MASK (1<<6)
299 #define IEEE80211_OFDM_RATE_18MB_MASK (1<<7)
300 #define IEEE80211_OFDM_RATE_24MB_MASK (1<<8)
301 #define IEEE80211_OFDM_RATE_36MB_MASK (1<<9)
302 #define IEEE80211_OFDM_RATE_48MB_MASK (1<<10)
303 #define IEEE80211_OFDM_RATE_54MB_MASK (1<<11)
305 #define IEEE80211_CCK_RATES_MASK 0x0000000F
306 #define IEEE80211_CCK_BASIC_RATES_MASK (IEEE80211_CCK_RATE_1MB_MASK | \
307 IEEE80211_CCK_RATE_2MB_MASK)
308 #define IEEE80211_CCK_DEFAULT_RATES_MASK (IEEE80211_CCK_BASIC_RATES_MASK | \
309 IEEE80211_CCK_RATE_5MB_MASK | \
310 IEEE80211_CCK_RATE_11MB_MASK)
312 #define IEEE80211_OFDM_RATES_MASK 0x00000FF0
313 #define IEEE80211_OFDM_BASIC_RATES_MASK (IEEE80211_OFDM_RATE_6MB_MASK | \
314 IEEE80211_OFDM_RATE_12MB_MASK | \
315 IEEE80211_OFDM_RATE_24MB_MASK)
316 #define IEEE80211_OFDM_DEFAULT_RATES_MASK (IEEE80211_OFDM_BASIC_RATES_MASK | \
317 IEEE80211_OFDM_RATE_9MB_MASK | \
318 IEEE80211_OFDM_RATE_18MB_MASK | \
319 IEEE80211_OFDM_RATE_36MB_MASK | \
320 IEEE80211_OFDM_RATE_48MB_MASK | \
321 IEEE80211_OFDM_RATE_54MB_MASK)
322 #define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
323 IEEE80211_CCK_DEFAULT_RATES_MASK)
325 #define IEEE80211_NUM_OFDM_RATES 8
326 #define IEEE80211_NUM_CCK_RATES 4
327 #define IEEE80211_OFDM_SHIFT_MASK_A 4
329 /* this is stolen and modified from the madwifi driver*/
330 #define IEEE80211_FC0_TYPE_MASK 0x0c
331 #define IEEE80211_FC0_TYPE_DATA 0x08
332 #define IEEE80211_FC0_SUBTYPE_MASK 0xB0
333 #define IEEE80211_FC0_SUBTYPE_QOS 0x80
335 #define IEEE80211_QOS_HAS_SEQ(fc) \
336 (((fc) & (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == \
337 (IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_QOS))
339 /* this is stolen from ipw2200 driver */
340 #define IEEE_IBSS_MAC_HASH_SIZE 31
341 struct ieee_ibss_seq
{
345 unsigned long packet_time
[17];
346 struct list_head list
;
349 /* NOTE: This data is for statistical purposes; not all hardware provides this
350 * information for frames received. Not setting these will not cause
351 * any adverse affects. */
352 struct ieee80211_rx_stats
{
358 u16 rate
; /* in 100 kbps */
367 /* IEEE 802.11 requires that STA supports concurrent reception of at least
368 * three fragmented frames. This define can be increased to support more
369 * concurrent frames, but it should be noted that each entry can consume about
370 * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
371 #define IEEE80211_FRAG_CACHE_LEN 4
373 struct ieee80211_frag_entry
{
374 unsigned long first_frag_time
;
376 unsigned int last_frag
;
378 u8 src_addr
[ETH_ALEN
];
379 u8 dst_addr
[ETH_ALEN
];
382 struct ieee80211_stats
{
383 unsigned int tx_unicast_frames
;
384 unsigned int tx_multicast_frames
;
385 unsigned int tx_fragments
;
386 unsigned int tx_unicast_octets
;
387 unsigned int tx_multicast_octets
;
388 unsigned int tx_deferred_transmissions
;
389 unsigned int tx_single_retry_frames
;
390 unsigned int tx_multiple_retry_frames
;
391 unsigned int tx_retry_limit_exceeded
;
392 unsigned int tx_discards
;
393 unsigned int rx_unicast_frames
;
394 unsigned int rx_multicast_frames
;
395 unsigned int rx_fragments
;
396 unsigned int rx_unicast_octets
;
397 unsigned int rx_multicast_octets
;
398 unsigned int rx_fcs_errors
;
399 unsigned int rx_discards_no_buffer
;
400 unsigned int tx_discards_wrong_sa
;
401 unsigned int rx_discards_undecryptable
;
402 unsigned int rx_message_in_msg_fragments
;
403 unsigned int rx_message_in_bad_msg_fragments
;
406 struct ieee80211_device
;
408 #include "ieee80211_crypt.h"
410 #define SEC_KEY_1 (1<<0)
411 #define SEC_KEY_2 (1<<1)
412 #define SEC_KEY_3 (1<<2)
413 #define SEC_KEY_4 (1<<3)
414 #define SEC_ACTIVE_KEY (1<<4)
415 #define SEC_AUTH_MODE (1<<5)
416 #define SEC_UNICAST_GROUP (1<<6)
417 #define SEC_LEVEL (1<<7)
418 #define SEC_ENABLED (1<<8)
420 #define SEC_LEVEL_0 0 /* None */
421 #define SEC_LEVEL_1 1 /* WEP 40 and 104 bit */
422 #define SEC_LEVEL_2 2 /* Level 1 + TKIP */
423 #define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
424 #define SEC_LEVEL_3 4 /* Level 2 + CCMP */
427 #define WEP_KEY_LEN 13
429 #define WEP_KEY_LEN_MODIF 32
431 struct ieee80211_security
{
436 unicast_uses_group
:1;
437 u8 key_sizes
[WEP_KEYS
];
438 u8 keys
[WEP_KEYS
][WEP_KEY_LEN_MODIF
];
441 } __attribute__ ((packed
));
446 802.11 data frame from AP
448 ,-------------------------------------------------------------------.
449 Bytes | 2 | 2 | 6 | 6 | 6 | 2 | 0..2312 | 4 |
450 |------|------|---------|---------|---------|------|---------|------|
451 Desc. | ctrl | dura | DA/RA | TA | SA | Sequ | frame | fcs |
452 | | tion | (BSSID) | | | ence | data | |
453 `-------------------------------------------------------------------'
459 /* Management Frame Information Element Types */
463 MFIE_TYPE_FH_SET
= 2,
464 MFIE_TYPE_DS_SET
= 3,
465 MFIE_TYPE_CF_SET
= 4,
467 MFIE_TYPE_IBSS_SET
= 6,
468 MFIE_TYPE_COUNTRY
= 7,
469 MFIE_TYPE_CHALLENGE
= 16,
472 MFIE_TYPE_RATES_EX
= 50,
473 MFIE_TYPE_GENERIC
= 221,
476 struct ieee80211_header_data
{
485 struct ieee80211_hdr_3addr
{
492 } __attribute__ ((packed
));
494 struct ieee80211_hdr_4addr
{
502 } __attribute__ ((packed
));
504 struct ieee80211_hdr_3addrqos
{
512 } __attribute__ ((packed
));
514 struct ieee80211_hdr_4addrqos
{
523 } __attribute__ ((packed
));
525 struct ieee80211_info_element_hdr
{
528 } __attribute__ ((packed
));
530 struct ieee80211_info_element
{
534 } __attribute__ ((packed
));
536 struct ieee80211_authentication
{
537 struct ieee80211_header_data header
;
541 //struct ieee80211_info_element_hdr info_element;
542 } __attribute__ ((packed
));
544 struct ieee80211_disassoc_frame
{
545 struct ieee80211_hdr_3addr header
;
547 } __attribute__ ((packed
));
549 struct ieee80211_probe_request
{
550 struct ieee80211_header_data header
;
551 /* struct ieee80211_info_element info_element; */
552 } __attribute__ ((packed
));
554 struct ieee80211_probe_response
{
555 struct ieee80211_header_data header
;
559 struct ieee80211_info_element info_element
;
560 } __attribute__ ((packed
));
562 struct ieee80211_assoc_request_frame
{
563 struct ieee80211_hdr_3addr header
;
566 //u8 current_ap[ETH_ALEN];
567 struct ieee80211_info_element_hdr info_element
;
568 } __attribute__ ((packed
));
570 struct ieee80211_assoc_response_frame
{
571 struct ieee80211_hdr_3addr header
;
575 struct ieee80211_info_element info_element
; /* supported rates */
576 } __attribute__ ((packed
));
578 struct ieee80211_txb
{
584 struct sk_buff
*fragments
[0];
587 /* SWEEP TABLE ENTRIES NUMBER */
588 #define MAX_SWEEP_TAB_ENTRIES 42
589 #define MAX_SWEEP_TAB_ENTRIES_PER_PACKET 7
591 /* MAX_RATES_LENGTH needs to be 12. The spec says 8, and many APs
592 * only use 8, and then use extended rates for the remaining supported
593 * rates. Other APs, however, stick all of their supported rates on the
594 * main rates information element... */
595 #define MAX_RATES_LENGTH ((u8)12)
596 #define MAX_RATES_EX_LENGTH ((u8)16)
598 #define MAX_NETWORK_COUNT 128
600 #define MAX_CHANNEL_NUMBER 165
602 #define IEEE80211_SOFTMAC_SCAN_TIME 100 /* (HZ / 2) */
603 #define IEEE80211_SOFTMAC_ASSOC_RETRY_TIME (HZ * 2)
605 #define CRC_LENGTH 4U
607 #define MAX_WPA_IE_LEN 64
609 #define NETWORK_EMPTY_ESSID (1 << 0)
610 #define NETWORK_HAS_OFDM (1 << 1)
611 #define NETWORK_HAS_CCK (1 << 2)
613 struct ieee80211_wmm_ac_param
{
619 struct ieee80211_wmm_ts_info
{
623 } __attribute__ ((packed
));
625 struct ieee80211_wmm_tspec_elem
{
626 struct ieee80211_wmm_ts_info ts_info
;
642 }__attribute__((packed
));
649 EAPOL_ENCAP_ASF_ALERT
652 static const char *eap_types
[] = {
653 [EAP_PACKET
] = "EAP-Packet",
654 [EAPOL_START
] = "EAPOL-Start",
655 [EAPOL_LOGOFF
] = "EAPOL-Logoff",
656 [EAPOL_KEY
] = "EAPOL-Key",
657 [EAPOL_ENCAP_ASF_ALERT
] = "EAPOL-Encap-ASF-Alert"
660 static inline const char *eap_get_type(int type
)
662 return (type
>= ARRAY_SIZE(eap_types
)) ? "Unknown" : eap_types
[type
];
671 } __attribute__ ((packed
));
673 struct ieee80211_softmac_stats
{
674 unsigned int rx_ass_ok
;
675 unsigned int rx_ass_err
;
676 unsigned int rx_probe_rq
;
677 unsigned int tx_probe_rs
;
678 unsigned int tx_beacons
;
679 unsigned int rx_auth_rq
;
680 unsigned int rx_auth_rs_ok
;
681 unsigned int rx_auth_rs_err
;
682 unsigned int tx_auth_rq
;
683 unsigned int no_auth_rs
;
684 unsigned int no_ass_rs
;
685 unsigned int tx_ass_rq
;
686 unsigned int rx_ass_rq
;
687 unsigned int tx_probe_rq
;
688 unsigned int reassoc
;
689 unsigned int swtxstop
;
690 unsigned int swtxawake
;
693 #define BEACON_PROBE_SSID_ID_POSITION 12
696 * These are the data types that can make up management packets
702 u8 current_ap[ETH_ALEN];
705 u16 association_id:14, reserved:2;
706 } __attribute__ ((packed));
712 #define IEEE80211_DEFAULT_TX_ESSID "Penguin"
713 #define IEEE80211_DEFAULT_BASIC_RATE 10
715 enum {WMM_all_frame
, WMM_two_frame
, WMM_four_frame
, WMM_six_frame
};
716 #define MAX_SP_Len (WMM_all_frame << 4)
717 #define IEEE80211_QOS_TID 0x0f
718 #define QOS_CTL_NOTCONTAIN_ACK (0x01 << 5)
720 #define MAX_IE_LEN 0xFF //+YJ,080625
722 typedef struct _CHANNEL_LIST
{
723 u8 Channel
[MAX_CHANNEL_NUMBER
+ 1];
725 }CHANNEL_LIST
, *PCHANNEL_LIST
;
728 #define IEEE80211_WATCH_DOG_TIME 2000
731 #define ANTENNA_DIVERSITY_TIMER_PERIOD 1000 // 1000 m
734 #define IEEE80211_DTIM_MBCAST 4
735 #define IEEE80211_DTIM_UCAST 2
736 #define IEEE80211_DTIM_VALID 1
737 #define IEEE80211_DTIM_INVALID 0
739 #define IEEE80211_PS_DISABLED 0
740 #define IEEE80211_PS_UNICAST IEEE80211_DTIM_UCAST
741 #define IEEE80211_PS_MBCAST IEEE80211_DTIM_MBCAST
742 #define IEEE80211_PS_ENABLE IEEE80211_DTIM_VALID
743 //added by David for QoS 2006/6/30
744 //#define WMM_Hang_8187
749 #define WME_AC_BE 0x00
750 #define WME_AC_BK 0x01
751 #define WME_AC_VI 0x02
752 #define WME_AC_VO 0x03
753 #define WME_ACI_MASK 0x03
754 #define WME_AIFSN_MASK 0x03
755 #define WME_AC_PRAM_LEN 16
757 //UP Mapping to AC, using in MgntQuery_SequenceNumber() and maybe for DSCP
758 //#define UP2AC(up) ((up<3) ? ((up==0)?1:0) : (up>>1))
759 #define UP2AC(up) ( \
760 ((up) < 1) ? WME_AC_BE : \
761 ((up) < 3) ? WME_AC_BK : \
762 ((up) < 4) ? WME_AC_BE : \
763 ((up) < 6) ? WME_AC_VI : \
765 //AC Mapping to UP, using in Tx part for selecting the corresponding TX queue
766 #define AC2UP(_ac) ( \
767 ((_ac) == WME_AC_VO) ? 6 : \
768 ((_ac) == WME_AC_VI) ? 5 : \
769 ((_ac) == WME_AC_BK) ? 1 : \
772 #define ETHER_ADDR_LEN 6 /* length of an Ethernet address */
773 struct ether_header
{
774 u8 ether_dhost
[ETHER_ADDR_LEN
];
775 u8 ether_shost
[ETHER_ADDR_LEN
];
777 } __attribute__((packed
));
779 #ifndef ETHERTYPE_PAE
780 #define ETHERTYPE_PAE 0x888e /* EAPOL PAE/802.1x */
783 #define ETHERTYPE_IP 0x0800 /* IP protocol */
786 struct ieee80211_network
{
787 /* These entries are used to identify a unique network */
790 /* Ensure null-terminated for any debug msgs */
791 u8 ssid
[IW_ESSID_MAX_SIZE
+ 1];
794 /* These are network statistics */
795 struct ieee80211_rx_stats stats
;
797 u8 rates
[MAX_RATES_LENGTH
];
799 u8 rates_ex
[MAX_RATES_EX_LENGTH
];
801 unsigned long last_scanned
;
809 u8 wpa_ie
[MAX_WPA_IE_LEN
];
811 u8 rsn_ie
[MAX_WPA_IE_LEN
];
815 u32 last_dtim_sta_time
[2];
816 struct list_head list
;
819 struct ieee80211_wmm_ac_param wmm_param
[4];
825 u8 Turbo_Enable
;//enable turbo mode, added by thomas
827 u8 CountryIeBuf
[MAX_IE_LEN
];
830 enum ieee80211_state
{
832 /* the card is not linked at all */
833 IEEE80211_NOLINK
= 0,
835 /* IEEE80211_ASSOCIATING* are for BSS client mode
836 * the driver shall not perform RX filtering unless
837 * the state is LINKED.
838 * The driver shall just check for the state LINKED and
839 * defaults to NOLINK for ALL the other states (including
843 /* the association procedure will start (wq scheduling)*/
844 IEEE80211_ASSOCIATING
,
845 IEEE80211_ASSOCIATING_RETRY
,
847 /* the association procedure is sending AUTH request*/
848 IEEE80211_ASSOCIATING_AUTHENTICATING
,
850 /* the association procedure has successfully authentcated
851 * and is sending association request
853 IEEE80211_ASSOCIATING_AUTHENTICATED
,
855 /* the link is ok. the card associated to a BSS or linked
856 * to a ibss cell or acting as an AP and creating the bss
860 /* same as LINKED, but the driver shall apply RX filter
861 * rules as we are in NO_LINK mode. As the card is still
862 * logically linked, but it is doing a syncro site survey
863 * then it will be back to LINKED state.
865 IEEE80211_LINKED_SCANNING
,
869 #define DEFAULT_MAX_SCAN_AGE (15 * HZ)
870 #define DEFAULT_FTS 2346
872 #define CFG_IEEE80211_RESERVE_FCS (1<<0)
873 #define CFG_IEEE80211_COMPUTE_FCS (1<<1)
875 typedef struct tx_pending_t
{
877 struct ieee80211_txb
*txb
;
881 COUNTRY_CODE_FCC
= 0,
883 COUNTRY_CODE_ETSI
= 2,
884 COUNTRY_CODE_SPAIN
= 3,
885 COUNTRY_CODE_FRANCE
= 4,
886 COUNTRY_CODE_MKK
= 5,
887 COUNTRY_CODE_MKK1
= 6,
888 COUNTRY_CODE_ISRAEL
= 7,
889 COUNTRY_CODE_TELEC
= 8,
890 COUNTRY_CODE_GLOBAL_DOMAIN
= 9,
891 COUNTRY_CODE_WORLD_WIDE_13_INDEX
= 10
894 struct ieee80211_device
{
895 struct net_device
*dev
;
897 /* Bookkeeping structures */
898 struct net_device_stats stats
;
899 struct ieee80211_stats ieee_stats
;
900 struct ieee80211_softmac_stats softmac_stats
;
902 /* Probe / Beacon management */
903 struct list_head network_free_list
;
904 struct list_head network_list
;
905 struct ieee80211_network
*networks
;
909 int iw_mode
; /* operating mode (IW_MODE_*) */
912 spinlock_t wpax_suitlist_lock
;
914 int tx_headroom
; /* Set to size of any additional room needed at front
915 * of allocated Tx SKBs */
918 /* WEP and other encryption related settings at the device level */
919 int open_wep
; /* Set to 1 to allow unencrypted frames */
921 int reset_on_keychange
; /* Set to 1 if the HW needs to be reset on
924 /* If the host performs {en,de}cryption, then set to 1 */
927 int ieee802_1x
; /* is IEEE 802.1X used */
931 int drop_unencrypted
;
932 int tkip_countermeasures
;
938 u16 pairwise_key_type
;
939 u16 broadcast_key_type
;
941 struct list_head crypt_deinit_list
;
942 struct ieee80211_crypt_data
*crypt
[WEP_KEYS
];
943 int tx_keyidx
; /* default TX key index (crypt[tx_keyidx]) */
944 struct timer_list crypt_deinit_timer
;
946 int bcrx_sta_key
; /* use individual keys to override default keys even
947 * with RX of broad/multicast frames */
949 /* Fragmentation structures */
950 // each streaming contain a entry
951 struct ieee80211_frag_entry frag_cache
[17][IEEE80211_FRAG_CACHE_LEN
];
952 unsigned int frag_next_idx
[17];
953 u16 fts
; /* Fragmentation Threshold */
955 /* This stores infos for the current network.
956 * Either the network we are associated in INFRASTRUCTURE
957 * or the network that we are creating in MASTER mode.
958 * ad-hoc is a mixture ;-).
959 * Note that in infrastructure mode, even when not associated,
960 * fields bssid and essid may be valid (if wpa_set and essid_set
961 * are true) as thy carry the value set by the user via iwconfig
963 struct ieee80211_network current_network
;
966 enum ieee80211_state state
;
969 int mode
; /* A, B, G */
970 int modulation
; /* CCK, OFDM */
971 int freq_band
; /* 2.4Ghz, 5.2Ghz, Mixed */
972 int abg_true
; /* ABG flag */
974 /* used for forcing the ibss workqueue to terminate
975 * without wait for the syncro scan to terminate
977 short sync_scan_hurryup
;
982 // For Liteon Ch12~13 passive scan
983 u8 MinPassiveChnlNum
;
986 int rate
; /* current rate */
988 //FIXME: pleace callback, see if redundant with softmac_features
991 /* this contains flags for selectively enable softmac support */
992 u16 softmac_features
;
994 /* if the sequence control field is not filled by HW */
997 /* association procedure transaction sequence number */
1000 /* AID for RTXed association responses */
1003 /* power save mode related*/
1007 struct tasklet_struct ps_task
;
1012 /* used if IEEE_SOFTMAC_TX_QUEUE is set */
1015 short proto_started
;
1017 struct semaphore wx_sem
;
1018 struct semaphore scan_sem
;
1020 spinlock_t mgmt_tx_lock
;
1021 spinlock_t beacon_lock
;
1028 u8 wpax_type_set
; //{added by David, 2006.9.28}
1029 u32 wpax_type_notify
; //{added by David, 2006.9.26}
1031 /* QoS related flag */
1032 char init_wmmparam_flag
;
1034 /* for discarding duplicated packets in IBSS */
1035 struct list_head ibss_mac_hash
[IEEE_IBSS_MAC_HASH_SIZE
];
1037 /* for discarding duplicated packets in BSS */
1038 u16 last_rxseq_num
[17]; /* rx seq previous per-tid */
1039 u16 last_rxfrag_num
[17];/* tx frag previous per-tid */
1040 unsigned long last_packet_time
[17];
1043 unsigned long last_rx_ps_time
;
1045 /* used if IEEE_SOFTMAC_SINGLE_QUEUE is set */
1046 struct sk_buff
*mgmt_queue_ring
[MGMT_QUEUE_NUM
];
1047 int mgmt_queue_head
;
1048 int mgmt_queue_tail
;
1051 /* used if IEEE_SOFTMAC_TX_QUEUE is set */
1052 struct tx_pending_t tx_pending
;
1054 /* used if IEEE_SOFTMAC_ASSOCIATE is set */
1055 struct timer_list associate_timer
;
1057 /* used if IEEE_SOFTMAC_BEACONS is set */
1058 struct timer_list beacon_timer
;
1060 struct work_struct associate_complete_wq
;
1061 // struct work_struct associate_retry_wq;
1062 struct work_struct associate_procedure_wq
;
1063 // struct work_struct softmac_scan_wq;
1064 struct work_struct wx_sync_scan_wq
;
1065 struct work_struct wmm_param_update_wq
;
1066 struct work_struct ps_request_tx_ack_wq
;//for ps
1067 // struct work_struct hw_wakeup_wq;
1068 // struct work_struct hw_sleep_wq;
1069 // struct work_struct watch_dog_wq;
1074 unsigned long NumRxDataInPeriod
; //YJ,add,080828
1075 unsigned long NumRxBcnInPeriod
; //YJ,add,080828
1076 unsigned long NumRxOkTotal
;
1077 unsigned long NumRxUnicast
;//YJ,add,080828,for keep alive
1079 struct delayed_work softmac_scan_wq
;
1080 struct delayed_work associate_retry_wq
;
1081 struct delayed_work hw_wakeup_wq
;
1082 struct delayed_work hw_sleep_wq
;//+by amy 080324
1083 struct delayed_work watch_dog_wq
;
1084 struct delayed_work sw_antenna_wq
;
1085 struct delayed_work start_ibss_wq
;
1086 //by amy for rate adaptive 080312
1087 struct delayed_work rate_adapter_wq
;
1088 //by amy for rate adaptive
1089 struct delayed_work hw_dig_wq
;
1090 struct delayed_work tx_pw_wq
;
1092 //Added for RF power on power off by lizhaoming 080512
1093 struct delayed_work GPIOChangeRFWorkItem
;
1095 struct workqueue_struct
*wq
;
1097 /* Callback functions */
1098 void (*set_security
)(struct net_device
*dev
,
1099 struct ieee80211_security
*sec
);
1101 /* Used to TX data frame by using txb structs.
1102 * this is not used if in the softmac_features
1103 * is set the flag IEEE_SOFTMAC_TX_QUEUE
1105 int (*hard_start_xmit
)(struct ieee80211_txb
*txb
,
1106 struct net_device
*dev
);
1108 int (*reset_port
)(struct net_device
*dev
);
1110 /* Softmac-generated frames (mamagement) are TXed via this
1111 * callback if the flag IEEE_SOFTMAC_SINGLE_QUEUE is
1112 * not set. As some cards may have different HW queues that
1113 * one might want to use for data and management frames
1114 * the option to have two callbacks might be useful.
1115 * This fucntion can't sleep.
1117 int (*softmac_hard_start_xmit
)(struct sk_buff
*skb
,
1118 struct net_device
*dev
);
1120 /* used instead of hard_start_xmit (not softmac_hard_start_xmit)
1121 * if the IEEE_SOFTMAC_TX_QUEUE feature is used to TX data
1122 * frames. I the option IEEE_SOFTMAC_SINGLE_QUEUE is also set
1123 * then also management frames are sent via this callback.
1124 * This function can't sleep.
1126 void (*softmac_data_hard_start_xmit
)(struct sk_buff
*skb
,
1127 struct net_device
*dev
,int rate
);
1129 /* stops the HW queue for DATA frames. Useful to avoid
1130 * waste time to TX data frame when we are reassociating
1131 * This function can sleep.
1133 void (*data_hard_stop
)(struct net_device
*dev
);
1135 /* OK this is complementar to data_poll_hard_stop */
1136 void (*data_hard_resume
)(struct net_device
*dev
);
1138 /* ask to the driver to retune the radio .
1139 * This function can sleep. the driver should ensure
1140 * the radio has been swithced before return.
1142 void (*set_chan
)(struct net_device
*dev
,short ch
);
1144 /* These are not used if the ieee stack takes care of
1145 * scanning (IEEE_SOFTMAC_SCAN feature set).
1146 * In this case only the set_chan is used.
1148 * The syncro version is similar to the start_scan but
1149 * does not return until all channels has been scanned.
1150 * this is called in user context and should sleep,
1151 * it is called in a work_queue when swithcing to ad-hoc mode
1152 * or in behalf of iwlist scan when the card is associated
1153 * and root user ask for a scan.
1154 * the fucntion stop_scan should stop both the syncro and
1155 * background scanning and can sleep.
1156 * The fucntion start_scan should initiate the background
1157 * scanning and can't sleep.
1159 void (*scan_syncro
)(struct net_device
*dev
);
1160 void (*start_scan
)(struct net_device
*dev
);
1161 void (*stop_scan
)(struct net_device
*dev
);
1163 /* indicate the driver that the link state is changed
1164 * for example it may indicate the card is associated now.
1165 * Driver might be interested in this to apply RX filter
1166 * rules or simply light the LINK led
1168 void (*link_change
)(struct net_device
*dev
);
1170 /* these two function indicates to the HW when to start
1171 * and stop to send beacons. This is used when the
1172 * IEEE_SOFTMAC_BEACONS is not set. For now the
1173 * stop_send_bacons is NOT guaranteed to be called only
1174 * after start_send_beacons.
1176 void (*start_send_beacons
) (struct net_device
*dev
);
1177 void (*stop_send_beacons
) (struct net_device
*dev
);
1179 /* power save mode related */
1180 void (*sta_wake_up
) (struct net_device
*dev
);
1181 void (*ps_request_tx_ack
) (struct net_device
*dev
);
1182 void (*enter_sleep_state
) (struct net_device
*dev
, u32 th
, u32 tl
);
1183 short (*ps_is_queue_empty
) (struct net_device
*dev
);
1186 //void (*wmm_param_update) (struct net_device *dev, u8 *ac_param);
1187 //void (*wmm_param_update) (struct ieee80211_device *ieee);
1189 /* This must be the last item so that it points to the data
1190 * allocated beyond this structure by alloc_ieee80211 */
1194 #define IEEE_A (1<<0)
1195 #define IEEE_B (1<<1)
1196 #define IEEE_G (1<<2)
1197 #define IEEE_MODE_MASK (IEEE_A|IEEE_B|IEEE_G)
1199 /* Generate a 802.11 header */
1201 /* Uses the channel change callback directly
1202 * instead of [start/stop] scan callbacks
1204 #define IEEE_SOFTMAC_SCAN (1<<2)
1206 /* Perform authentication and association handshake */
1207 #define IEEE_SOFTMAC_ASSOCIATE (1<<3)
1209 /* Generate probe requests */
1210 #define IEEE_SOFTMAC_PROBERQ (1<<4)
1212 /* Generate respones to probe requests */
1213 #define IEEE_SOFTMAC_PROBERS (1<<5)
1215 /* The ieee802.11 stack will manages the netif queue
1216 * wake/stop for the driver, taking care of 802.11
1217 * fragmentation. See softmac.c for details. */
1218 #define IEEE_SOFTMAC_TX_QUEUE (1<<7)
1220 /* Uses only the softmac_data_hard_start_xmit
1221 * even for TX management frames.
1223 #define IEEE_SOFTMAC_SINGLE_QUEUE (1<<8)
1225 /* Generate beacons. The stack will enqueue beacons
1228 #define IEEE_SOFTMAC_BEACONS (1<<6)
1232 static inline void *ieee80211_priv(struct net_device
*dev
)
1234 return ((struct ieee80211_device
*)netdev_priv(dev
))->priv
;
1237 extern inline int ieee80211_is_empty_essid(const char *essid
, int essid_len
)
1239 /* Single white space is for Linksys APs */
1240 if (essid_len
== 1 && essid
[0] == ' ')
1243 /* Otherwise, if the entire essid is 0, we assume it is hidden */
1246 if (essid
[essid_len
] != '\0')
1253 extern inline int ieee80211_is_valid_mode(struct ieee80211_device
*ieee
, int mode
)
1256 * It is possible for both access points and our device to support
1257 * combinations of modes, so as long as there is one valid combination
1258 * of ap/device supported modes, then return success
1261 if ((mode
& IEEE_A
) &&
1262 (ieee
->modulation
& IEEE80211_OFDM_MODULATION
) &&
1263 (ieee
->freq_band
& IEEE80211_52GHZ_BAND
))
1266 if ((mode
& IEEE_G
) &&
1267 (ieee
->modulation
& IEEE80211_OFDM_MODULATION
) &&
1268 (ieee
->freq_band
& IEEE80211_24GHZ_BAND
))
1271 if ((mode
& IEEE_B
) &&
1272 (ieee
->modulation
& IEEE80211_CCK_MODULATION
) &&
1273 (ieee
->freq_band
& IEEE80211_24GHZ_BAND
))
1279 extern inline int ieee80211_get_hdrlen(u16 fc
)
1283 switch (WLAN_FC_GET_TYPE(fc
)) {
1284 case IEEE80211_FTYPE_DATA
:
1285 if ((fc
& IEEE80211_FCTL_FROMDS
) && (fc
& IEEE80211_FCTL_TODS
))
1286 hdrlen
= 30; /* Addr4 */
1287 if(IEEE80211_QOS_HAS_SEQ(fc
))
1288 hdrlen
+= 2; /* QOS ctrl*/
1290 case IEEE80211_FTYPE_CTL
:
1291 switch (WLAN_FC_GET_STYPE(fc
)) {
1292 case IEEE80211_STYPE_CTS
:
1293 case IEEE80211_STYPE_ACK
:
1309 extern void free_ieee80211(struct net_device
*dev
);
1310 extern struct net_device
*alloc_ieee80211(int sizeof_priv
);
1312 extern int ieee80211_set_encryption(struct ieee80211_device
*ieee
);
1314 /* ieee80211_tx.c */
1316 extern int ieee80211_encrypt_fragment(
1317 struct ieee80211_device
*ieee
,
1318 struct sk_buff
*frag
,
1321 extern int ieee80211_xmit(struct sk_buff
*skb
,
1322 struct net_device
*dev
);
1323 extern void ieee80211_txb_free(struct ieee80211_txb
*);
1326 /* ieee80211_rx.c */
1327 extern int ieee80211_rx(struct ieee80211_device
*ieee
, struct sk_buff
*skb
,
1328 struct ieee80211_rx_stats
*rx_stats
);
1329 extern void ieee80211_rx_mgt(struct ieee80211_device
*ieee
,
1330 struct ieee80211_hdr_4addr
*header
,
1331 struct ieee80211_rx_stats
*stats
);
1333 /* ieee80211_wx.c */
1334 extern int ieee80211_wx_get_scan(struct ieee80211_device
*ieee
,
1335 struct iw_request_info
*info
,
1336 union iwreq_data
*wrqu
, char *key
);
1337 extern int ieee80211_wx_set_encode(struct ieee80211_device
*ieee
,
1338 struct iw_request_info
*info
,
1339 union iwreq_data
*wrqu
, char *key
);
1340 extern int ieee80211_wx_get_encode(struct ieee80211_device
*ieee
,
1341 struct iw_request_info
*info
,
1342 union iwreq_data
*wrqu
, char *key
);
1343 extern int ieee80211_wx_set_encode_ext(struct ieee80211_device
*ieee
,
1344 struct iw_request_info
*info
,
1345 union iwreq_data
* wrqu
, char *extra
);
1346 int ieee80211_wx_set_auth(struct ieee80211_device
*ieee
,
1347 struct iw_request_info
*info
,
1348 struct iw_param
*data
, char *extra
);
1349 int ieee80211_wx_set_mlme(struct ieee80211_device
*ieee
,
1350 struct iw_request_info
*info
,
1351 union iwreq_data
*wrqu
, char *extra
);
1353 int ieee80211_wx_set_gen_ie(struct ieee80211_device
*ieee
, u8
*ie
, size_t len
);
1354 /* ieee80211_softmac.c */
1355 extern short ieee80211_is_54g(struct ieee80211_network net
);
1356 extern short ieee80211_is_shortslot(struct ieee80211_network net
);
1357 extern int ieee80211_rx_frame_softmac(struct ieee80211_device
*ieee
, struct sk_buff
*skb
,
1358 struct ieee80211_rx_stats
*rx_stats
, u16 type
,
1360 extern void ieee80211_softmac_new_net(struct ieee80211_device
*ieee
, struct ieee80211_network
*net
);
1362 extern void ieee80211_softmac_xmit(struct ieee80211_txb
*txb
, struct ieee80211_device
*ieee
);
1363 extern void ieee80211_softmac_check_all_nets(struct ieee80211_device
*ieee
);
1364 extern void ieee80211_start_bss(struct ieee80211_device
*ieee
);
1365 extern void ieee80211_start_master_bss(struct ieee80211_device
*ieee
);
1366 extern void ieee80211_start_ibss(struct ieee80211_device
*ieee
);
1367 extern void ieee80211_softmac_init(struct ieee80211_device
*ieee
);
1368 extern void ieee80211_softmac_free(struct ieee80211_device
*ieee
);
1369 extern void ieee80211_associate_abort(struct ieee80211_device
*ieee
);
1370 extern void ieee80211_disassociate(struct ieee80211_device
*ieee
);
1371 extern void ieee80211_stop_scan(struct ieee80211_device
*ieee
);
1372 extern void ieee80211_start_scan_syncro(struct ieee80211_device
*ieee
);
1373 extern void ieee80211_check_all_nets(struct ieee80211_device
*ieee
);
1374 extern void ieee80211_start_protocol(struct ieee80211_device
*ieee
);
1375 extern void ieee80211_stop_protocol(struct ieee80211_device
*ieee
);
1376 extern void ieee80211_softmac_start_protocol(struct ieee80211_device
*ieee
);
1377 extern void ieee80211_softmac_stop_protocol(struct ieee80211_device
*ieee
);
1378 extern void ieee80211_reset_queue(struct ieee80211_device
*ieee
);
1379 extern void ieee80211_wake_queue(struct ieee80211_device
*ieee
);
1380 extern void ieee80211_stop_queue(struct ieee80211_device
*ieee
);
1381 extern struct sk_buff
*ieee80211_get_beacon(struct ieee80211_device
*ieee
);
1382 extern void ieee80211_start_send_beacons(struct ieee80211_device
*ieee
);
1383 extern void ieee80211_stop_send_beacons(struct ieee80211_device
*ieee
);
1384 extern int ieee80211_wpa_supplicant_ioctl(struct ieee80211_device
*ieee
, struct iw_point
*p
);
1385 extern void notify_wx_assoc_event(struct ieee80211_device
*ieee
);
1386 extern void ieee80211_ps_tx_ack(struct ieee80211_device
*ieee
, short success
);
1387 extern void SendDisassociation(struct ieee80211_device
*ieee
,u8
* asSta
,u8 asRsn
);
1388 extern void ieee80211_start_scan(struct ieee80211_device
*ieee
);
1390 //Add for RF power on power off by lizhaoming 080512
1391 extern void SendDisassociation(struct ieee80211_device
*ieee
,
1395 /* ieee80211_crypt_ccmp&tkip&wep.c */
1396 extern void ieee80211_tkip_null(void);
1397 extern void ieee80211_wep_null(void);
1398 extern void ieee80211_ccmp_null(void);
1399 /* ieee80211_softmac_wx.c */
1401 extern int ieee80211_wx_get_wap(struct ieee80211_device
*ieee
,
1402 struct iw_request_info
*info
,
1403 union iwreq_data
*wrqu
, char *ext
);
1405 extern int ieee80211_wx_set_wap(struct ieee80211_device
*ieee
,
1406 struct iw_request_info
*info
,
1407 union iwreq_data
*awrq
,
1410 extern int ieee80211_wx_get_essid(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,union iwreq_data
*wrqu
,char *b
);
1412 extern int ieee80211_wx_set_rate(struct ieee80211_device
*ieee
,
1413 struct iw_request_info
*info
,
1414 union iwreq_data
*wrqu
, char *extra
);
1416 extern int ieee80211_wx_get_rate(struct ieee80211_device
*ieee
,
1417 struct iw_request_info
*info
,
1418 union iwreq_data
*wrqu
, char *extra
);
1420 extern int ieee80211_wx_set_mode(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,
1421 union iwreq_data
*wrqu
, char *b
);
1423 extern int ieee80211_wx_set_scan(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,
1424 union iwreq_data
*wrqu
, char *b
);
1426 extern int ieee80211_wx_set_essid(struct ieee80211_device
*ieee
,
1427 struct iw_request_info
*a
,
1428 union iwreq_data
*wrqu
, char *extra
);
1430 extern int ieee80211_wx_get_mode(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,
1431 union iwreq_data
*wrqu
, char *b
);
1433 extern int ieee80211_wx_set_freq(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,
1434 union iwreq_data
*wrqu
, char *b
);
1436 extern int ieee80211_wx_get_freq(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,
1437 union iwreq_data
*wrqu
, char *b
);
1439 extern void ieee80211_wx_sync_scan_wq(struct work_struct
*work
);
1441 extern int ieee80211_wx_set_rawtx(struct ieee80211_device
*ieee
,
1442 struct iw_request_info
*info
,
1443 union iwreq_data
*wrqu
, char *extra
);
1445 extern int ieee80211_wx_get_name(struct ieee80211_device
*ieee
,
1446 struct iw_request_info
*info
,
1447 union iwreq_data
*wrqu
, char *extra
);
1449 extern int ieee80211_wx_set_power(struct ieee80211_device
*ieee
,
1450 struct iw_request_info
*info
,
1451 union iwreq_data
*wrqu
, char *extra
);
1453 extern int ieee80211_wx_get_power(struct ieee80211_device
*ieee
,
1454 struct iw_request_info
*info
,
1455 union iwreq_data
*wrqu
, char *extra
);
1457 extern void ieee80211_softmac_ips_scan_syncro(struct ieee80211_device
*ieee
);
1459 extern void ieee80211_sta_ps_send_null_frame(struct ieee80211_device
*ieee
, short pwr
);
1461 extern const long ieee80211_wlan_frequencies
[];
1463 extern inline void ieee80211_increment_scans(struct ieee80211_device
*ieee
)
1468 extern inline int ieee80211_get_scans(struct ieee80211_device
*ieee
)
1473 static inline const char *escape_essid(const char *essid
, u8 essid_len
) {
1474 static char escaped
[IW_ESSID_MAX_SIZE
* 2 + 1];
1475 const char *s
= essid
;
1478 if (ieee80211_is_empty_essid(essid
, essid_len
)) {
1479 memcpy(escaped
, "<hidden>", sizeof("<hidden>"));
1483 essid_len
= min(essid_len
, (u8
)IW_ESSID_MAX_SIZE
);
1484 while (essid_len
--) {
1496 #endif /* IEEE80211_H */