1 # Helper to resolve issues with configs that have SPI enabled but I2C
2 # modular, meaning we can't build the codec driver in with I2C support.
3 # We use an ordered list of conditional defaults to pick the appropriate
4 # setting - SPI can't be modular so that case doesn't need to be covered.
5 config SND_SOC_I2C_AND_SPI
9 default y if SPI_MASTER=y
11 config SND_SOC_ALL_CODECS
12 tristate "Build all ASoC CODEC drivers"
14 select SND_SOC_AC97_CODEC if SND_SOC_AC97_BUS
15 select SND_SOC_AD1836 if SPI_MASTER
16 select SND_SOC_AD1938 if SPI_MASTER
17 select SND_SOC_AD1980 if SND_SOC_AC97_BUS
18 select SND_SOC_AD73311 if I2C
19 select SND_SOC_AK4104 if SPI_MASTER
20 select SND_SOC_AK4535 if I2C
21 select SND_SOC_AK4642 if I2C
22 select SND_SOC_CS4270 if I2C
23 select SND_SOC_MAX9877 if I2C
24 select SND_SOC_PCM3008
26 select SND_SOC_SSM2602 if I2C
27 select SND_SOC_STAC9766 if SND_SOC_AC97_BUS
28 select SND_SOC_TLV320AIC23 if I2C
29 select SND_SOC_TLV320AIC26 if SPI_MASTER
30 select SND_SOC_TLV320AIC3X if I2C
31 select SND_SOC_TWL4030 if TWL4030_CORE
32 select SND_SOC_UDA134X
33 select SND_SOC_UDA1380 if I2C
34 select SND_SOC_WM8350 if MFD_WM8350
35 select SND_SOC_WM8400 if MFD_WM8400
36 select SND_SOC_WM8510 if SND_SOC_I2C_AND_SPI
37 select SND_SOC_WM8523 if I2C
38 select SND_SOC_WM8580 if I2C
39 select SND_SOC_WM8728 if SND_SOC_I2C_AND_SPI
40 select SND_SOC_WM8731 if SND_SOC_I2C_AND_SPI
41 select SND_SOC_WM8750 if SND_SOC_I2C_AND_SPI
42 select SND_SOC_WM8753 if SND_SOC_I2C_AND_SPI
43 select SND_SOC_WM8776 if SND_SOC_I2C_AND_SPI
44 select SND_SOC_WM8900 if I2C
45 select SND_SOC_WM8903 if I2C
46 select SND_SOC_WM8940 if I2C
47 select SND_SOC_WM8960 if I2C
48 select SND_SOC_WM8961 if I2C
49 select SND_SOC_WM8971 if I2C
50 select SND_SOC_WM8974 if I2C
51 select SND_SOC_WM8988 if SND_SOC_I2C_AND_SPI
52 select SND_SOC_WM8990 if I2C
53 select SND_SOC_WM8993 if I2C
54 select SND_SOC_WM9081 if I2C
55 select SND_SOC_WM9705 if SND_SOC_AC97_BUS
56 select SND_SOC_WM9712 if SND_SOC_AC97_BUS
57 select SND_SOC_WM9713 if SND_SOC_AC97_BUS
59 Normally ASoC codec drivers are only built if a machine driver which
60 uses them is also built since they are only usable with a machine
61 driver. Selecting this option will allow these drivers to be built
62 without an explicit machine driver for test and development purposes.
64 Support for the bus types used to access the codecs to be built must
65 be selected separately.
69 config SND_SOC_WM_HUBS
71 default y if SND_SOC_WM8993=y
72 default m if SND_SOC_WM8993=m
74 config SND_SOC_AC97_CODEC
87 config SND_SOC_AD73311
99 # Cirrus Logic CS4270 Codec
100 config SND_SOC_CS4270
103 # Cirrus Logic CS4270 Codec VD = 3.3V Errata
104 # Select if you are affected by the errata where the part will not function
105 # if MCLK divide-by-1.5 is selected and VD is set to 3.3V. The driver will
106 # not select any sample rates that require MCLK to be divided by 1.5.
107 config SND_SOC_CS4270_VD33_ERRATA
109 depends on SND_SOC_CS4270
111 config SND_SOC_CX20442
117 config SND_SOC_PCM3008
123 config SND_SOC_SSM2602
126 config SND_SOC_STAC9766
129 config SND_SOC_TLV320AIC23
132 config SND_SOC_TLV320AIC26
133 tristate "TI TLV320AIC26 Codec support" if SND_SOC_OF_SIMPLE
136 config SND_SOC_TLV320AIC3X
139 config SND_SOC_TWL4030
142 config SND_SOC_UDA134X
145 config SND_SOC_UDA1380
148 config SND_SOC_WM8350
151 config SND_SOC_WM8400
154 config SND_SOC_WM8510
157 config SND_SOC_WM8523
160 config SND_SOC_WM8580
163 config SND_SOC_WM8728
166 config SND_SOC_WM8731
169 config SND_SOC_WM8750
172 config SND_SOC_WM8753
175 config SND_SOC_WM8776
178 config SND_SOC_WM8900
181 config SND_SOC_WM8903
184 config SND_SOC_WM8940
187 config SND_SOC_WM8960
190 config SND_SOC_WM8961
193 config SND_SOC_WM8971
196 config SND_SOC_WM8974
199 config SND_SOC_WM8988
202 config SND_SOC_WM8990
205 config SND_SOC_WM8993
208 config SND_SOC_WM9081
211 config SND_SOC_WM9705
214 config SND_SOC_WM9712
217 config SND_SOC_WM9713
221 config SND_SOC_MAX9877