arch/arm/plat-mxc/gpio.c

   1 /*
   2  * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
   3  * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
   4  *
   5  * Based on code from Freescale,
   6  * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License
  10  * as published by the Free Software Foundation; either version 2
  11  * of the License, or (at your option) any later version.
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  20  */
  21
  22 #include <linux/init.h>
  23 #include <linux/io.h>
  24 #include <linux/irq.h>
  25 #include <linux/gpio.h>
  26 #include <mach/hardware.h>
  27 #include <asm-generic/bug.h>
  28
  29 static struct mxc_gpio_port *mxc_gpio_ports;
  30 static int gpio_table_size;
  31
  32 #define cpu_is_mx1_mx2()        (cpu_is_mx1() || cpu_is_mx2())
  33
  34 #define GPIO_DR         (cpu_is_mx1_mx2() ? 0x1c : 0x00)
  35 #define GPIO_GDIR       (cpu_is_mx1_mx2() ? 0x00 : 0x04)
  36 #define GPIO_PSR        (cpu_is_mx1_mx2() ? 0x24 : 0x08)
  37 #define GPIO_ICR1       (cpu_is_mx1_mx2() ? 0x28 : 0x0C)
  38 #define GPIO_ICR2       (cpu_is_mx1_mx2() ? 0x2C : 0x10)
  39 #define GPIO_IMR        (cpu_is_mx1_mx2() ? 0x30 : 0x14)
  40 #define GPIO_ISR        (cpu_is_mx1_mx2() ? 0x34 : 0x18)
  41 #define GPIO_ISR        (cpu_is_mx1_mx2() ? 0x34 : 0x18)
  42
  43 #define GPIO_INT_LOW_LEV        (cpu_is_mx1_mx2() ? 0x3 : 0x0)
  44 #define GPIO_INT_HIGH_LEV       (cpu_is_mx1_mx2() ? 0x2 : 0x1)
  45 #define GPIO_INT_RISE_EDGE      (cpu_is_mx1_mx2() ? 0x0 : 0x2)
  46 #define GPIO_INT_FALL_EDGE      (cpu_is_mx1_mx2() ? 0x1 : 0x3)
  47 #define GPIO_INT_NONE           0x4
  48
  49 /* Note: This driver assumes 32 GPIOs are handled in one register */
  50
  51 static void _clear_gpio_irqstatus(struct mxc_gpio_port *port, u32 index)
  52 {
  53         __raw_writel(1 << index, port->base + GPIO_ISR);
  54 }
  55
  56 static void _set_gpio_irqenable(struct mxc_gpio_port *port, u32 index,
  57                                 int enable)
  58 {
  59         u32 l;
  60
  61         l = __raw_readl(port->base + GPIO_IMR);
  62         l = (l & (~(1 << index))) | (!!enable << index);
  63         __raw_writel(l, port->base + GPIO_IMR);
  64 }
  65
  66 static void gpio_ack_irq(u32 irq)
  67 {
  68         u32 gpio = irq_to_gpio(irq);
  69         _clear_gpio_irqstatus(&mxc_gpio_ports[gpio / 32], gpio & 0x1f);
  70 }
  71
  72 static void gpio_mask_irq(u32 irq)
  73 {
  74         u32 gpio = irq_to_gpio(irq);
  75         _set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 0);
  76 }
  77
  78 static void gpio_unmask_irq(u32 irq)
  79 {
  80         u32 gpio = irq_to_gpio(irq);
  81         _set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 1);
  82 }
  83
  84 static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset);
  85
  86 static int gpio_set_irq_type(u32 irq, u32 type)
  87 {
  88         u32 gpio = irq_to_gpio(irq);
  89         struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32];
  90         u32 bit, val;
  91         int edge;
  92         void __iomem *reg = port->base;
  93
  94         port->both_edges &= ~(1 << (gpio & 31));
  95         switch (type) {
  96         case IRQ_TYPE_EDGE_RISING:
  97                 edge = GPIO_INT_RISE_EDGE;
  98                 break;
  99         case IRQ_TYPE_EDGE_FALLING:
 100                 edge = GPIO_INT_FALL_EDGE;
 101                 break;
 102         case IRQ_TYPE_EDGE_BOTH:
 103                 val = mxc_gpio_get(&port->chip, gpio & 31);
 104                 if (val) {
 105                         edge = GPIO_INT_LOW_LEV;
 106                         pr_debug("mxc: set GPIO %d to low trigger\n", gpio);
 107                 } else {
 108                         edge = GPIO_INT_HIGH_LEV;
 109                         pr_debug("mxc: set GPIO %d to high trigger\n", gpio);
 110                 }
 111                 port->both_edges |= 1 << (gpio & 31);
 112                 break;
 113         case IRQ_TYPE_LEVEL_LOW:
 114                 edge = GPIO_INT_LOW_LEV;
 115                 break;
 116         case IRQ_TYPE_LEVEL_HIGH:
 117                 edge = GPIO_INT_HIGH_LEV;
 118                 break;
 119         default:
 120                 return -EINVAL;
 121         }
 122
 123         reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
 124         bit = gpio & 0xf;
 125         val = __raw_readl(reg) & ~(0x3 << (bit << 1));
 126         __raw_writel(val | (edge << (bit << 1)), reg);
 127         _clear_gpio_irqstatus(port, gpio & 0x1f);
 128
 129         return 0;
 130 }
 131
 132 static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
 133 {
 134         void __iomem *reg = port->base;
 135         u32 bit, val;
 136         int edge;
 137
 138         reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
 139         bit = gpio & 0xf;
 140         val = __raw_readl(reg);
 141         edge = (val >> (bit << 1)) & 3;
 142         val &= ~(0x3 << (bit << 1));
 143         switch (edge) {
 144         case GPIO_INT_HIGH_LEV:
 145                 edge = GPIO_INT_LOW_LEV;
 146                 pr_debug("mxc: switch GPIO %d to low trigger\n", gpio);
 147                 break;
 148         case GPIO_INT_LOW_LEV:
 149                 edge = GPIO_INT_HIGH_LEV;
 150                 pr_debug("mxc: switch GPIO %d to high trigger\n", gpio);
 151                 break;
 152         default:
 153                 pr_err("mxc: invalid configuration for GPIO %d: %x\n",
 154                        gpio, edge);
 155                 return;
 156         }
 157         __raw_writel(val | (edge << (bit << 1)), reg);
 158 }
 159
 160 /* handle n interrupts in one status register */
 161 static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
 162 {
 163         u32 gpio_irq_no;
 164
 165         gpio_irq_no = port->virtual_irq_start;
 166         for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) {
 167                 u32 gpio = irq_to_gpio(gpio_irq_no);
 168
 169                 if ((irq_stat & 1) == 0)
 170                         continue;
 171
 172                 BUG_ON(!(irq_desc[gpio_irq_no].handle_irq));
 173
 174                 if (port->both_edges & (1 << (gpio & 31)))
 175                         mxc_flip_edge(port, gpio);
 176
 177                 irq_desc[gpio_irq_no].handle_irq(gpio_irq_no,
 178                                 &irq_desc[gpio_irq_no]);
 179         }
 180 }
 181
 182 /* MX1 and MX3 has one interrupt *per* gpio port */
 183 static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 184 {
 185         u32 irq_stat;
 186         struct mxc_gpio_port *port = (struct mxc_gpio_port *)get_irq_data(irq);
 187
 188         irq_stat = __raw_readl(port->base + GPIO_ISR) &
 189                         __raw_readl(port->base + GPIO_IMR);
 190
 191         mxc_gpio_irq_handler(port, irq_stat);
 192 }
 193
 194 /* MX2 has one interrupt *for all* gpio ports */
 195 static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 196 {
 197         int i;
 198         u32 irq_msk, irq_stat;
 199         struct mxc_gpio_port *port = (struct mxc_gpio_port *)get_irq_data(irq);
 200
 201         /* walk through all interrupt status registers */
 202         for (i = 0; i < gpio_table_size; i++) {
 203                 irq_msk = __raw_readl(port[i].base + GPIO_IMR);
 204                 if (!irq_msk)
 205                         continue;
 206
 207                 irq_stat = __raw_readl(port[i].base + GPIO_ISR) & irq_msk;
 208                 if (irq_stat)
 209                         mxc_gpio_irq_handler(&port[i], irq_stat);
 210         }
 211 }
 212
 213 static struct irq_chip gpio_irq_chip = {
 214         .ack = gpio_ack_irq,
 215         .mask = gpio_mask_irq,
 216         .unmask = gpio_unmask_irq,
 217         .set_type = gpio_set_irq_type,
 218 };
 219
 220 static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset,
 221                                 int dir)
 222 {
 223         struct mxc_gpio_port *port =
 224                 container_of(chip, struct mxc_gpio_port, chip);
 225         u32 l;
 226
 227         l = __raw_readl(port->base + GPIO_GDIR);
 228         if (dir)
 229                 l |= 1 << offset;
 230         else
 231                 l &= ~(1 << offset);
 232         __raw_writel(l, port->base + GPIO_GDIR);
 233 }
 234
 235 static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 236 {
 237         struct mxc_gpio_port *port =
 238                 container_of(chip, struct mxc_gpio_port, chip);
 239         void __iomem *reg = port->base + GPIO_DR;
 240         u32 l;
 241
 242         l = (__raw_readl(reg) & (~(1 << offset))) | (value << offset);
 243         __raw_writel(l, reg);
 244 }
 245
 246 static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset)
 247 {
 248         struct mxc_gpio_port *port =
 249                 container_of(chip, struct mxc_gpio_port, chip);
 250
 251         return (__raw_readl(port->base + GPIO_PSR) >> offset) & 1;
 252 }
 253
 254 static int mxc_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 255 {
 256         _set_gpio_direction(chip, offset, 0);
 257         return 0;
 258 }
 259
 260 static int mxc_gpio_direction_output(struct gpio_chip *chip,
 261                                      unsigned offset, int value)
 262 {
 263         mxc_gpio_set(chip, offset, value);
 264         _set_gpio_direction(chip, offset, 1);
 265         return 0;
 266 }
 267
 268 int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
 269 {
 270         int i, j;
 271
 272         /* save for local usage */
 273         mxc_gpio_ports = port;
 274         gpio_table_size = cnt;
 275
 276         printk(KERN_INFO "MXC GPIO hardware\n");
 277
 278         for (i = 0; i < cnt; i++) {
 279                 /* disable the interrupt and clear the status */
 280                 __raw_writel(0, port[i].base + GPIO_IMR);
 281                 __raw_writel(~0, port[i].base + GPIO_ISR);
 282                 for (j = port[i].virtual_irq_start;
 283                         j < port[i].virtual_irq_start + 32; j++) {
 284                         set_irq_chip(j, &gpio_irq_chip);
 285                         set_irq_handler(j, handle_edge_irq);
 286                         set_irq_flags(j, IRQF_VALID);
 287                 }
 288
 289                 /* register gpio chip */
 290                 port[i].chip.direction_input = mxc_gpio_direction_input;
 291                 port[i].chip.direction_output = mxc_gpio_direction_output;
 292                 port[i].chip.get = mxc_gpio_get;
 293                 port[i].chip.set = mxc_gpio_set;
 294                 port[i].chip.base = i * 32;
 295                 port[i].chip.ngpio = 32;
 296
 297                 /* its a serious configuration bug when it fails */
 298                 BUG_ON( gpiochip_add(&port[i].chip) < 0 );
 299
 300                 if (cpu_is_mx1() || cpu_is_mx3() || cpu_is_mx25()) {
 301                         /* setup one handler for each entry */
 302                         set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler);
 303                         set_irq_data(port[i].irq, &port[i]);
 304                 }
 305         }
 306
 307         if (cpu_is_mx2()) {
 308                 /* setup one handler for all GPIO interrupts */
 309                 set_irq_chained_handler(port[0].irq, mx2_gpio_irq_handler);
 310                 set_irq_data(port[0].irq, port);
 311         }
 312
 313         return 0;
 314 }