?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
OMAP3: SR: Remove redundant defines
[linux-ginger.git] / arch / cris / arch-v32 / drivers / mach-a3 / gpio.c
blob97357cfd17bbc90a0f72da1f732d00c47af67079
1 /*
2 * Artec-3 general port I/O device
3 *
4 * Copyright (c) 2007 Axis Communications AB
5 *
6 * Authors: Bjorn Wesen (initial version)
7 * Ola Knutsson (LED handling)
8 * Johan Adolfsson (read/set directions, write, port G,
9 * port to ETRAX FS.
10 * Ricard Wanderlof (PWM for Artpec-3)
11 *
12 */
13
14 #include <linux/module.h>
15 #include <linux/sched.h>
16 #include <linux/slab.h>
17 #include <linux/ioport.h>
18 #include <linux/errno.h>
19 #include <linux/kernel.h>
20 #include <linux/fs.h>
21 #include <linux/string.h>
22 #include <linux/poll.h>
23 #include <linux/init.h>
24 #include <linux/interrupt.h>
25 #include <linux/spinlock.h>
26 #include <linux/smp_lock.h>
27
28 #include <asm/etraxgpio.h>
29 #include <hwregs/reg_map.h>
30 #include <hwregs/reg_rdwr.h>
31 #include <hwregs/gio_defs.h>
32 #include <hwregs/intr_vect_defs.h>
33 #include <asm/io.h>
34 #include <asm/system.h>
35 #include <asm/irq.h>
36 #include <mach/pinmux.h>
37
38 #ifdef CONFIG_ETRAX_VIRTUAL_GPIO
39 #include "../i2c.h"
40
41 #define VIRT_I2C_ADDR 0x40
42 #endif
43
44 /* The following gio ports on ARTPEC-3 is available:
45 * pa 32 bits
46 * pb 32 bits
47 * pc 16 bits
48 * each port has a rw_px_dout, r_px_din and rw_px_oe register.
49 */
50
51 #define GPIO_MAJOR 120 /* experimental MAJOR number */
52
53 #define I2C_INTERRUPT_BITS 0x300 /* i2c0_done and i2c1_done bits */
54
55 #define D(x)
56
57 #if 0
58 static int dp_cnt;
59 #define DP(x) \
60 do { \
61 dp_cnt++; \
62 if (dp_cnt % 1000 == 0) \
63 x; \
64 } while (0)
65 #else
66 #define DP(x)
67 #endif
68
69 static char gpio_name[] = "etrax gpio";
70
71 #ifdef CONFIG_ETRAX_VIRTUAL_GPIO
72 static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
73 unsigned long arg);
74 #endif
75 static int gpio_ioctl(struct inode *inode, struct file *file,
76 unsigned int cmd, unsigned long arg);
77 static ssize_t gpio_write(struct file *file, const char __user *buf,
78 size_t count, loff_t *off);
79 static int gpio_open(struct inode *inode, struct file *filp);
80 static int gpio_release(struct inode *inode, struct file *filp);
81 static unsigned int gpio_poll(struct file *filp,
82 struct poll_table_struct *wait);
83
84 /* private data per open() of this driver */
85
86 struct gpio_private {
87 struct gpio_private *next;
88 /* The IO_CFG_WRITE_MODE_VALUE only support 8 bits: */
89 unsigned char clk_mask;
90 unsigned char data_mask;
91 unsigned char write_msb;
92 unsigned char pad1;
93 /* These fields are generic */
94 unsigned long highalarm, lowalarm;
95 wait_queue_head_t alarm_wq;
96 int minor;
97 };
98
99 static void gpio_set_alarm(struct gpio_private *priv);
100 static int gpio_leds_ioctl(unsigned int cmd, unsigned long arg);
101 static int gpio_pwm_ioctl(struct gpio_private *priv, unsigned int cmd,
102 unsigned long arg);
103
104
105 /* linked list of alarms to check for */
106
107 static struct gpio_private *alarmlist;
108
109 static int wanted_interrupts;
110
111 static DEFINE_SPINLOCK(gpio_lock);
112
113 #define NUM_PORTS (GPIO_MINOR_LAST+1)
114 #define GIO_REG_RD_ADDR(reg) \
115 (unsigned long *)(regi_gio + REG_RD_ADDR_gio_##reg)
116 #define GIO_REG_WR_ADDR(reg) \
117 (unsigned long *)(regi_gio + REG_WR_ADDR_gio_##reg)
118 static unsigned long led_dummy;
119 static unsigned long port_d_dummy; /* Only input on Artpec-3 */
120 #ifdef CONFIG_ETRAX_VIRTUAL_GPIO
121 static unsigned long port_e_dummy; /* Non existent on Artpec-3 */
122 static unsigned long virtual_dummy;
123 static unsigned long virtual_rw_pv_oe = CONFIG_ETRAX_DEF_GIO_PV_OE;
124 static unsigned short cached_virtual_gpio_read;
125 #endif
126
127 static unsigned long *data_out[NUM_PORTS] = {
128 GIO_REG_WR_ADDR(rw_pa_dout),
129 GIO_REG_WR_ADDR(rw_pb_dout),
130 &led_dummy,
131 GIO_REG_WR_ADDR(rw_pc_dout),
132 &port_d_dummy,
133 #ifdef CONFIG_ETRAX_VIRTUAL_GPIO
134 &port_e_dummy,
135 &virtual_dummy,
136 #endif
137 };
138
139 static unsigned long *data_in[NUM_PORTS] = {
140 GIO_REG_RD_ADDR(r_pa_din),
141 GIO_REG_RD_ADDR(r_pb_din),
142 &led_dummy,
143 GIO_REG_RD_ADDR(r_pc_din),
144 GIO_REG_RD_ADDR(r_pd_din),
145 #ifdef CONFIG_ETRAX_VIRTUAL_GPIO
146 &port_e_dummy,
147 &virtual_dummy,
148 #endif
149 };
150
151 static unsigned long changeable_dir[NUM_PORTS] = {
152 CONFIG_ETRAX_PA_CHANGEABLE_DIR,
153 CONFIG_ETRAX_PB_CHANGEABLE_DIR,
154 0,
155 CONFIG_ETRAX_PC_CHANGEABLE_DIR,
156 0,
157 #ifdef CONFIG_ETRAX_VIRTUAL_GPIO
158 0,
159 CONFIG_ETRAX_PV_CHANGEABLE_DIR,
160 #endif
161 };
162
163 static unsigned long changeable_bits[NUM_PORTS] = {
164 CONFIG_ETRAX_PA_CHANGEABLE_BITS,
165 CONFIG_ETRAX_PB_CHANGEABLE_BITS,
166 0,
167 CONFIG_ETRAX_PC_CHANGEABLE_BITS,
168 0,
169 #ifdef CONFIG_ETRAX_VIRTUAL_GPIO
170 0,
171 CONFIG_ETRAX_PV_CHANGEABLE_BITS,
172 #endif
173 };
174
175 static unsigned long *dir_oe[NUM_PORTS] = {
176 GIO_REG_WR_ADDR(rw_pa_oe),
177 GIO_REG_WR_ADDR(rw_pb_oe),
178 &led_dummy,
179 GIO_REG_WR_ADDR(rw_pc_oe),
180 &port_d_dummy,
181 #ifdef CONFIG_ETRAX_VIRTUAL_GPIO
182 &port_e_dummy,
183 &virtual_rw_pv_oe,
184 #endif
185 };
186
187 static void gpio_set_alarm(struct gpio_private *priv)
188 {
189 int bit;
190 int intr_cfg;
191 int mask;
192 int pins;
193 unsigned long flags;
194
195 spin_lock_irqsave(&gpio_lock, flags);
196 intr_cfg = REG_RD_INT(gio, regi_gio, rw_intr_cfg);
197 pins = REG_RD_INT(gio, regi_gio, rw_intr_pins);
198 mask = REG_RD_INT(gio, regi_gio, rw_intr_mask) & I2C_INTERRUPT_BITS;
199
200 for (bit = 0; bit < 32; bit++) {
201 int intr = bit % 8;
202 int pin = bit / 8;
203 if (priv->minor < GPIO_MINOR_LEDS)
204 pin += priv->minor * 4;
205 else
206 pin += (priv->minor - 1) * 4;
207
208 if (priv->highalarm & (1<<bit)) {
209 intr_cfg |= (regk_gio_hi << (intr * 3));
210 mask |= 1 << intr;
211 wanted_interrupts = mask & 0xff;
212 pins |= pin << (intr * 4);
213 } else if (priv->lowalarm & (1<<bit)) {
214 intr_cfg |= (regk_gio_lo << (intr * 3));
215 mask |= 1 << intr;
216 wanted_interrupts = mask & 0xff;
217 pins |= pin << (intr * 4);
218 }
219 }
220
221 REG_WR_INT(gio, regi_gio, rw_intr_cfg, intr_cfg);
222 REG_WR_INT(gio, regi_gio, rw_intr_pins, pins);
223 REG_WR_INT(gio, regi_gio, rw_intr_mask, mask);
224
225 spin_unlock_irqrestore(&gpio_lock, flags);
226 }
227
228 static unsigned int gpio_poll(struct file *file, struct poll_table_struct *wait)
229 {
230 unsigned int mask = 0;
231 struct gpio_private *priv = file->private_data;
232 unsigned long data;
233 unsigned long tmp;
234
235 if (priv->minor >= GPIO_MINOR_PWM0 &&
236 priv->minor <= GPIO_MINOR_LAST_PWM)
237 return 0;
238
239 poll_wait(file, &priv->alarm_wq, wait);
240 if (priv->minor <= GPIO_MINOR_D) {
241 data = readl(data_in[priv->minor]);
242 REG_WR_INT(gio, regi_gio, rw_ack_intr, wanted_interrupts);
243 tmp = REG_RD_INT(gio, regi_gio, rw_intr_mask);
244 tmp &= I2C_INTERRUPT_BITS;
245 tmp |= wanted_interrupts;
246 REG_WR_INT(gio, regi_gio, rw_intr_mask, tmp);
247 } else
248 return 0;
249
250 if ((data & priv->highalarm) || (~data & priv->lowalarm))
251 mask = POLLIN|POLLRDNORM;
252
253 DP(printk(KERN_DEBUG "gpio_poll ready: mask 0x%08X\n", mask));
254 return mask;
255 }
256
257 static irqreturn_t gpio_interrupt(int irq, void *dev_id)
258 {
259 reg_gio_rw_intr_mask intr_mask;
260 reg_gio_r_masked_intr masked_intr;
261 reg_gio_rw_ack_intr ack_intr;
262 unsigned long flags;
263 unsigned long tmp;
264 unsigned long tmp2;
265 #ifdef CONFIG_ETRAX_VIRTUAL_GPIO
266 unsigned char enable_gpiov_ack = 0;
267 #endif
268
269 /* Find what PA interrupts are active */
270 masked_intr = REG_RD(gio, regi_gio, r_masked_intr);
271 tmp = REG_TYPE_CONV(unsigned long, reg_gio_r_masked_intr, masked_intr);
272
273 /* Find those that we have enabled */
274 spin_lock_irqsave(&gpio_lock, flags);
275 tmp &= wanted_interrupts;
276 spin_unlock_irqrestore(&gpio_lock, flags);
277
278 #ifdef CONFIG_ETRAX_VIRTUAL_GPIO
279 /* Something changed on virtual GPIO. Interrupt is acked by
280 * reading the device.
281 */
282 if (tmp & (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN)) {
283 i2c_read(VIRT_I2C_ADDR, (void *)&cached_virtual_gpio_read,
284 sizeof(cached_virtual_gpio_read));
285 enable_gpiov_ack = 1;
286 }
287 #endif
288
289 /* Ack them */
290 ack_intr = REG_TYPE_CONV(reg_gio_rw_ack_intr, unsigned long, tmp);
291 REG_WR(gio, regi_gio, rw_ack_intr, ack_intr);
292
293 /* Disable those interrupts.. */
294 intr_mask = REG_RD(gio, regi_gio, rw_intr_mask);
295 tmp2 = REG_TYPE_CONV(unsigned long, reg_gio_rw_intr_mask, intr_mask);
296 tmp2 &= ~tmp;
297 #ifdef CONFIG_ETRAX_VIRTUAL_GPIO
298 /* Do not disable interrupt on virtual GPIO. Changes on virtual
299 * pins are only noticed by an interrupt.
300 */
301 if (enable_gpiov_ack)
302 tmp2 |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
303 #endif
304 intr_mask = REG_TYPE_CONV(reg_gio_rw_intr_mask, unsigned long, tmp2);
305 REG_WR(gio, regi_gio, rw_intr_mask, intr_mask);
306
307 return IRQ_RETVAL(tmp);
308 }
309
310 static void gpio_write_bit(unsigned long *port, unsigned char data, int bit,
311 unsigned char clk_mask, unsigned char data_mask)
312 {
313 unsigned long shadow = readl(port) & ~clk_mask;
314 writel(shadow, port);
315 if (data & 1 << bit)
316 shadow |= data_mask;
317 else
318 shadow &= ~data_mask;
319 writel(shadow, port);
320 /* For FPGA: min 5.0ns (DCC) before CCLK high */
321 shadow |= clk_mask;
322 writel(shadow, port);
323 }
324
325 static void gpio_write_byte(struct gpio_private *priv, unsigned long *port,
326 unsigned char data)
327 {
328 int i;
329
330 if (priv->write_msb)
331 for (i = 7; i >= 0; i--)
332 gpio_write_bit(port, data, i, priv->clk_mask,
333 priv->data_mask);
334 else
335 for (i = 0; i <= 7; i++)
336 gpio_write_bit(port, data, i, priv->clk_mask,
337 priv->data_mask);
338 }
339
340
341 static ssize_t gpio_write(struct file *file, const char __user *buf,
342 size_t count, loff_t *off)
343 {
344 struct gpio_private *priv = file->private_data;
345 unsigned long flags;
346 ssize_t retval = count;
347 /* Only bits 0-7 may be used for write operations but allow all
348 devices except leds... */
349 #ifdef CONFIG_ETRAX_VIRTUAL_GPIO
350 if (priv->minor == GPIO_MINOR_V)
351 return -EFAULT;
352 #endif
353 if (priv->minor == GPIO_MINOR_LEDS)
354 return -EFAULT;
355
356 if (priv->minor >= GPIO_MINOR_PWM0 &&
357 priv->minor <= GPIO_MINOR_LAST_PWM)
358 return -EFAULT;
359
360 if (!access_ok(VERIFY_READ, buf, count))
361 return -EFAULT;
362
363 /* It must have been configured using the IO_CFG_WRITE_MODE */
364 /* Perhaps a better error code? */
365 if (priv->clk_mask == 0 || priv->data_mask == 0)
366 return -EPERM;
367
368 D(printk(KERN_DEBUG "gpio_write: %lu to data 0x%02X clk 0x%02X "
369 "msb: %i\n",
370 count, priv->data_mask, priv->clk_mask, priv->write_msb));
371
372 spin_lock_irqsave(&gpio_lock, flags);
373
374 while (count--)
375 gpio_write_byte(priv, data_out[priv->minor], *buf++);
376
377 spin_unlock_irqrestore(&gpio_lock, flags);
378 return retval;
379 }
380
381 static int gpio_open(struct inode *inode, struct file *filp)
382 {
383 struct gpio_private *priv;
384 int p = iminor(inode);
385
386 if (p > GPIO_MINOR_LAST_PWM ||
387 (p > GPIO_MINOR_LAST && p < GPIO_MINOR_PWM0))
388 return -EINVAL;
389
390 priv = kmalloc(sizeof(struct gpio_private), GFP_KERNEL);
391
392 if (!priv)
393 return -ENOMEM;
394
395 lock_kernel();
396 memset(priv, 0, sizeof(*priv));
397
398 priv->minor = p;
399 filp->private_data = priv;
400
401 /* initialize the io/alarm struct, not for PWM ports though */
402 if (p <= GPIO_MINOR_LAST) {
403
404 priv->clk_mask = 0;
405 priv->data_mask = 0;
406 priv->highalarm = 0;
407 priv->lowalarm = 0;
408
409 init_waitqueue_head(&priv->alarm_wq);
410
411 /* link it into our alarmlist */
412 spin_lock_irq(&gpio_lock);
413 priv->next = alarmlist;
414 alarmlist = priv;
415 spin_unlock_irq(&gpio_lock);
416 }
417
418 unlock_kernel();
419 return 0;
420 }
421
422 static int gpio_release(struct inode *inode, struct file *filp)
423 {
424 struct gpio_private *p;
425 struct gpio_private *todel;
426 /* local copies while updating them: */
427 unsigned long a_high, a_low;
428
429 /* prepare to free private structure */
430 todel = filp->private_data;
431
432 /* unlink from alarmlist - only for non-PWM ports though */
433 if (todel->minor <= GPIO_MINOR_LAST) {
434 spin_lock_irq(&gpio_lock);
435 p = alarmlist;
436
437 if (p == todel)
438 alarmlist = todel->next;
439 else {
440 while (p->next != todel)
441 p = p->next;
442 p->next = todel->next;
443 }
444
445 /* Check if there are still any alarms set */
446 p = alarmlist;
447 a_high = 0;
448 a_low = 0;
449 while (p) {
450 if (p->minor == GPIO_MINOR_A) {
451 #ifdef CONFIG_ETRAX_VIRTUAL_GPIO
452 p->lowalarm |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
453 #endif
454 a_high |= p->highalarm;
455 a_low |= p->lowalarm;
456 }
457
458 p = p->next;
459 }
460
461 #ifdef CONFIG_ETRAX_VIRTUAL_GPIO
462 /* Variable 'a_low' needs to be set here again
463 * to ensure that interrupt for virtual GPIO is handled.
464 */
465 a_low |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
466 #endif
467
468 spin_unlock_irq(&gpio_lock);
469 }
470 kfree(todel);
471
472 return 0;
473 }
474
475 /* Main device API. ioctl's to read/set/clear bits, as well as to
476 * set alarms to wait for using a subsequent select().
477 */
478
479 inline unsigned long setget_input(struct gpio_private *priv, unsigned long arg)
480 {
481 /* Set direction 0=unchanged 1=input,
482 * return mask with 1=input
483 */
484 unsigned long flags;
485 unsigned long dir_shadow;
486
487 spin_lock_irqsave(&gpio_lock, flags);
488
489 dir_shadow = readl(dir_oe[priv->minor]) &
490 ~(arg & changeable_dir[priv->minor]);
491 writel(dir_shadow, dir_oe[priv->minor]);
492
493 spin_unlock_irqrestore(&gpio_lock, flags);
494
495 if (priv->minor == GPIO_MINOR_C)
496 dir_shadow ^= 0xFFFF; /* Only 16 bits */
497 #ifdef CONFIG_ETRAX_VIRTUAL_GPIO
498 else if (priv->minor == GPIO_MINOR_V)
499 dir_shadow ^= 0xFFFF; /* Only 16 bits */
500 #endif
501 else
502 dir_shadow ^= 0xFFFFFFFF; /* PA, PB and PD 32 bits */
503
504 return dir_shadow;
505
506 } /* setget_input */
507
508 static inline unsigned long setget_output(struct gpio_private *priv,
509 unsigned long arg)
510 {
511 unsigned long flags;
512 unsigned long dir_shadow;
513
514 spin_lock_irqsave(&gpio_lock, flags);
515
516 dir_shadow = readl(dir_oe[priv->minor]) |
517 (arg & changeable_dir[priv->minor]);
518 writel(dir_shadow, dir_oe[priv->minor]);
519
520 spin_unlock_irqrestore(&gpio_lock, flags);
521 return dir_shadow;
522 } /* setget_output */
523
524 static int gpio_ioctl(struct inode *inode, struct file *file,
525 unsigned int cmd, unsigned long arg)
526 {
527 unsigned long flags;
528 unsigned long val;
529 unsigned long shadow;
530 struct gpio_private *priv = file->private_data;
531
532 if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE)
533 return -ENOTTY;
534
535 /* Check for special ioctl handlers first */
536
537 #ifdef CONFIG_ETRAX_VIRTUAL_GPIO
538 if (priv->minor == GPIO_MINOR_V)
539 return virtual_gpio_ioctl(file, cmd, arg);
540 #endif
541
542 if (priv->minor == GPIO_MINOR_LEDS)
543 return gpio_leds_ioctl(cmd, arg);
544
545 if (priv->minor >= GPIO_MINOR_PWM0 &&
546 priv->minor <= GPIO_MINOR_LAST_PWM)
547 return gpio_pwm_ioctl(priv, cmd, arg);
548
549 switch (_IOC_NR(cmd)) {
550 case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */
551 /* Read the port. */
552 return readl(data_in[priv->minor]);
553 case IO_SETBITS:
554 spin_lock_irqsave(&gpio_lock, flags);
555 /* Set changeable bits with a 1 in arg. */
556 shadow = readl(data_out[priv->minor]) |
557 (arg & changeable_bits[priv->minor]);
558 writel(shadow, data_out[priv->minor]);
559 spin_unlock_irqrestore(&gpio_lock, flags);
560 break;
561 case IO_CLRBITS:
562 spin_lock_irqsave(&gpio_lock, flags);
563 /* Clear changeable bits with a 1 in arg. */
564 shadow = readl(data_out[priv->minor]) &
565 ~(arg & changeable_bits[priv->minor]);
566 writel(shadow, data_out[priv->minor]);
567 spin_unlock_irqrestore(&gpio_lock, flags);
568 break;
569 case IO_HIGHALARM:
570 /* Set alarm when bits with 1 in arg go high. */
571 priv->highalarm |= arg;
572 gpio_set_alarm(priv);
573 break;
574 case IO_LOWALARM:
575 /* Set alarm when bits with 1 in arg go low. */
576 priv->lowalarm |= arg;
577 gpio_set_alarm(priv);
578 break;
579 case IO_CLRALARM:
580 /* Clear alarm for bits with 1 in arg. */
581 priv->highalarm &= ~arg;
582 priv->lowalarm &= ~arg;
583 gpio_set_alarm(priv);
584 break;
585 case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */
586 /* Read direction 0=input 1=output */
587 return readl(dir_oe[priv->minor]);
588
589 case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */
590 /* Set direction 0=unchanged 1=input,
591 * return mask with 1=input
592 */
593 return setget_input(priv, arg);
594
595 case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */
596 /* Set direction 0=unchanged 1=output,
597 * return mask with 1=output
598 */
599 return setget_output(priv, arg);
600
601 case IO_CFG_WRITE_MODE:
602 {
603 int res = -EPERM;
604 unsigned long dir_shadow, clk_mask, data_mask, write_msb;
605
606 clk_mask = arg & 0xFF;
607 data_mask = (arg >> 8) & 0xFF;
608 write_msb = (arg >> 16) & 0x01;
609
610 /* Check if we're allowed to change the bits and
611 * the direction is correct
612 */
613 spin_lock_irqsave(&gpio_lock, flags);
614 dir_shadow = readl(dir_oe[priv->minor]);
615 if ((clk_mask & changeable_bits[priv->minor]) &&
616 (data_mask & changeable_bits[priv->minor]) &&
617 (clk_mask & dir_shadow) &&
618 (data_mask & dir_shadow)) {
619 priv->clk_mask = clk_mask;
620 priv->data_mask = data_mask;
621 priv->write_msb = write_msb;
622 res = 0;
623 }
624 spin_unlock_irqrestore(&gpio_lock, flags);
625
626 return res;
627 }
628 case IO_READ_INBITS:
629 /* *arg is result of reading the input pins */
630 val = readl(data_in[priv->minor]);
631 if (copy_to_user((void __user *)arg, &val, sizeof(val)))
632 return -EFAULT;
633 return 0;
634 case IO_READ_OUTBITS:
635 /* *arg is result of reading the output shadow */
636 val = *data_out[priv->minor];
637 if (copy_to_user((void __user *)arg, &val, sizeof(val)))
638 return -EFAULT;
639 break;
640 case IO_SETGET_INPUT:
641 /* bits set in *arg is set to input,
642 * *arg updated with current input pins.
643 */
644 if (copy_from_user(&val, (void __user *)arg, sizeof(val)))
645 return -EFAULT;
646 val = setget_input(priv, val);
647 if (copy_to_user((void __user *)arg, &val, sizeof(val)))
648 return -EFAULT;
649 break;
650 case IO_SETGET_OUTPUT:
651 /* bits set in *arg is set to output,
652 * *arg updated with current output pins.
653 */
654 if (copy_from_user(&val, (void __user *)arg, sizeof(val)))
655 return -EFAULT;
656 val = setget_output(priv, val);
657 if (copy_to_user((void __user *)arg, &val, sizeof(val)))
658 return -EFAULT;
659 break;
660 default:
661 return -EINVAL;
662 } /* switch */
663
664 return 0;
665 }
666
667 #ifdef CONFIG_ETRAX_VIRTUAL_GPIO
668 static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
669 unsigned long arg)
670 {
671 unsigned long flags;
672 unsigned short val;
673 unsigned short shadow;
674 struct gpio_private *priv = file->private_data;
675
676 switch (_IOC_NR(cmd)) {
677 case IO_SETBITS:
678 spin_lock_irqsave(&gpio_lock, flags);
679 /* Set changeable bits with a 1 in arg. */
680 i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
681 shadow |= ~readl(dir_oe[priv->minor]) |
682 (arg & changeable_bits[priv->minor]);
683 i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
684 spin_unlock_irqrestore(&gpio_lock, flags);
685 break;
686 case IO_CLRBITS:
687 spin_lock_irqsave(&gpio_lock, flags);
688 /* Clear changeable bits with a 1 in arg. */
689 i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
690 shadow |= ~readl(dir_oe[priv->minor]) &
691 ~(arg & changeable_bits[priv->minor]);
692 i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
693 spin_unlock_irqrestore(&gpio_lock, flags);
694 break;
695 case IO_HIGHALARM:
696 /* Set alarm when bits with 1 in arg go high. */
697 priv->highalarm |= arg;
698 break;
699 case IO_LOWALARM:
700 /* Set alarm when bits with 1 in arg go low. */
701 priv->lowalarm |= arg;
702 break;
703 case IO_CLRALARM:
704 /* Clear alarm for bits with 1 in arg. */
705 priv->highalarm &= ~arg;
706 priv->lowalarm &= ~arg;
707 break;
708 case IO_CFG_WRITE_MODE:
709 {
710 unsigned long dir_shadow;
711 dir_shadow = readl(dir_oe[priv->minor]);
712
713 priv->clk_mask = arg & 0xFF;
714 priv->data_mask = (arg >> 8) & 0xFF;
715 priv->write_msb = (arg >> 16) & 0x01;
716 /* Check if we're allowed to change the bits and
717 * the direction is correct
718 */
719 if (!((priv->clk_mask & changeable_bits[priv->minor]) &&
720 (priv->data_mask & changeable_bits[priv->minor]) &&
721 (priv->clk_mask & dir_shadow) &&
722 (priv->data_mask & dir_shadow))) {
723 priv->clk_mask = 0;
724 priv->data_mask = 0;
725 return -EPERM;
726 }
727 break;
728 }
729 case IO_READ_INBITS:
730 /* *arg is result of reading the input pins */
731 val = cached_virtual_gpio_read & ~readl(dir_oe[priv->minor]);
732 if (copy_to_user((void __user *)arg, &val, sizeof(val)))
733 return -EFAULT;
734 return 0;
735
736 case IO_READ_OUTBITS:
737 /* *arg is result of reading the output shadow */
738 i2c_read(VIRT_I2C_ADDR, (void *)&val, sizeof(val));
739 val &= readl(dir_oe[priv->minor]);
740 if (copy_to_user((void __user *)arg, &val, sizeof(val)))
741 return -EFAULT;
742 break;
743 case IO_SETGET_INPUT:
744 {
745 /* bits set in *arg is set to input,
746 * *arg updated with current input pins.
747 */
748 unsigned short input_mask = ~readl(dir_oe[priv->minor]);
749 if (copy_from_user(&val, (void __user *)arg, sizeof(val)))
750 return -EFAULT;
751 val = setget_input(priv, val);
752 if (copy_to_user((void __user *)arg, &val, sizeof(val)))
753 return -EFAULT;
754 if ((input_mask & val) != input_mask) {
755 /* Input pins changed. All ports desired as input
756 * should be set to logic 1.
757 */
758 unsigned short change = input_mask ^ val;
759 i2c_read(VIRT_I2C_ADDR, (void *)&shadow,
760 sizeof(shadow));
761 shadow &= ~change;
762 shadow |= val;
763 i2c_write(VIRT_I2C_ADDR, (void *)&shadow,
764 sizeof(shadow));
765 }
766 break;
767 }
768 case IO_SETGET_OUTPUT:
769 /* bits set in *arg is set to output,
770 * *arg updated with current output pins.
771 */
772 if (copy_from_user(&val, (void __user *)arg, sizeof(val)))
773 return -EFAULT;
774 val = setget_output(priv, val);
775 if (copy_to_user((void __user *)arg, &val, sizeof(val)))
776 return -EFAULT;
777 break;
778 default:
779 return -EINVAL;
780 } /* switch */
781 return 0;
782 }
783 #endif /* CONFIG_ETRAX_VIRTUAL_GPIO */
784
785 static int gpio_leds_ioctl(unsigned int cmd, unsigned long arg)
786 {
787 unsigned char green;
788 unsigned char red;
789
790 switch (_IOC_NR(cmd)) {
791 case IO_LEDACTIVE_SET:
792 green = ((unsigned char) arg) & 1;
793 red = (((unsigned char) arg) >> 1) & 1;
794 CRIS_LED_ACTIVE_SET_G(green);
795 CRIS_LED_ACTIVE_SET_R(red);
796 break;
797
798 default:
799 return -EINVAL;
800 } /* switch */
801
802 return 0;
803 }
804
805 static int gpio_pwm_set_mode(unsigned long arg, int pwm_port)
806 {
807 int pinmux_pwm = pinmux_pwm0 + pwm_port;
808 int mode;
809 reg_gio_rw_pwm0_ctrl rw_pwm_ctrl = {
810 .ccd_val = 0,
811 .ccd_override = regk_gio_no,
812 .mode = regk_gio_no
813 };
814 int allocstatus;
815
816 if (get_user(mode, &((struct io_pwm_set_mode *) arg)->mode))
817 return -EFAULT;
818 rw_pwm_ctrl.mode = mode;
819 if (mode != PWM_OFF)
820 allocstatus = crisv32_pinmux_alloc_fixed(pinmux_pwm);
821 else
822 allocstatus = crisv32_pinmux_dealloc_fixed(pinmux_pwm);
823 if (allocstatus)
824 return allocstatus;
825 REG_WRITE(reg_gio_rw_pwm0_ctrl, REG_ADDR(gio, regi_gio, rw_pwm0_ctrl) +
826 12 * pwm_port, rw_pwm_ctrl);
827 return 0;
828 }
829
830 static int gpio_pwm_set_period(unsigned long arg, int pwm_port)
831 {
832 struct io_pwm_set_period periods;
833 reg_gio_rw_pwm0_var rw_pwm_widths;
834
835 if (copy_from_user(&periods, (void __user *)arg, sizeof(periods)))
836 return -EFAULT;
837 if (periods.lo > 8191 || periods.hi > 8191)
838 return -EINVAL;
839 rw_pwm_widths.lo = periods.lo;
840 rw_pwm_widths.hi = periods.hi;
841 REG_WRITE(reg_gio_rw_pwm0_var, REG_ADDR(gio, regi_gio, rw_pwm0_var) +
842 12 * pwm_port, rw_pwm_widths);
843 return 0;
844 }
845
846 static int gpio_pwm_set_duty(unsigned long arg, int pwm_port)
847 {
848 unsigned int duty;
849 reg_gio_rw_pwm0_data rw_pwm_duty;
850
851 if (get_user(duty, &((struct io_pwm_set_duty *) arg)->duty))
852 return -EFAULT;
853 if (duty > 255)
854 return -EINVAL;
855 rw_pwm_duty.data = duty;
856 REG_WRITE(reg_gio_rw_pwm0_data, REG_ADDR(gio, regi_gio, rw_pwm0_data) +
857 12 * pwm_port, rw_pwm_duty);
858 return 0;
859 }
860
861 static int gpio_pwm_ioctl(struct gpio_private *priv, unsigned int cmd,
862 unsigned long arg)
863 {
864 int pwm_port = priv->minor - GPIO_MINOR_PWM0;
865
866 switch (_IOC_NR(cmd)) {
867 case IO_PWM_SET_MODE:
868 return gpio_pwm_set_mode(arg, pwm_port);
869 case IO_PWM_SET_PERIOD:
870 return gpio_pwm_set_period(arg, pwm_port);
871 case IO_PWM_SET_DUTY:
872 return gpio_pwm_set_duty(arg, pwm_port);
873 default:
874 return -EINVAL;
875 }
876 return 0;
877 }
878
879 static const struct file_operations gpio_fops = {
880 .owner = THIS_MODULE,
881 .poll = gpio_poll,
882 .ioctl = gpio_ioctl,
883 .write = gpio_write,
884 .open = gpio_open,
885 .release = gpio_release,
886 };
887
888 #ifdef CONFIG_ETRAX_VIRTUAL_GPIO
889 static void __init virtual_gpio_init(void)
890 {
891 reg_gio_rw_intr_cfg intr_cfg;
892 reg_gio_rw_intr_mask intr_mask;
893 unsigned short shadow;
894
895 shadow = ~virtual_rw_pv_oe; /* Input ports should be set to logic 1 */
896 shadow |= CONFIG_ETRAX_DEF_GIO_PV_OUT;
897 i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
898
899 /* Set interrupt mask and on what state the interrupt shall trigger.
900 * For virtual gpio the interrupt shall trigger on logic '0'.
901 */
902 intr_cfg = REG_RD(gio, regi_gio, rw_intr_cfg);
903 intr_mask = REG_RD(gio, regi_gio, rw_intr_mask);
904
905 switch (CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN) {
906 case 0:
907 intr_cfg.pa0 = regk_gio_lo;
908 intr_mask.pa0 = regk_gio_yes;
909 break;
910 case 1:
911 intr_cfg.pa1 = regk_gio_lo;
912 intr_mask.pa1 = regk_gio_yes;
913 break;
914 case 2:
915 intr_cfg.pa2 = regk_gio_lo;
916 intr_mask.pa2 = regk_gio_yes;
917 break;
918 case 3:
919 intr_cfg.pa3 = regk_gio_lo;
920 intr_mask.pa3 = regk_gio_yes;
921 break;
922 case 4:
923 intr_cfg.pa4 = regk_gio_lo;
924 intr_mask.pa4 = regk_gio_yes;
925 break;
926 case 5:
927 intr_cfg.pa5 = regk_gio_lo;
928 intr_mask.pa5 = regk_gio_yes;
929 break;
930 case 6:
931 intr_cfg.pa6 = regk_gio_lo;
932 intr_mask.pa6 = regk_gio_yes;
933 break;
934 case 7:
935 intr_cfg.pa7 = regk_gio_lo;
936 intr_mask.pa7 = regk_gio_yes;
937 break;
938 }
939
940 REG_WR(gio, regi_gio, rw_intr_cfg, intr_cfg);
941 REG_WR(gio, regi_gio, rw_intr_mask, intr_mask);
942 }
943 #endif
944
945 /* main driver initialization routine, called from mem.c */
946
947 static int __init gpio_init(void)
948 {
949 int res;
950
951 printk(KERN_INFO "ETRAX FS GPIO driver v2.7, (c) 2003-2008 "
952 "Axis Communications AB\n");
953
954 /* do the formalities */
955
956 res = register_chrdev(GPIO_MAJOR, gpio_name, &gpio_fops);
957 if (res < 0) {
958 printk(KERN_ERR "gpio: couldn't get a major number.\n");
959 return res;
960 }
961
962 /* Clear all leds */
963 CRIS_LED_NETWORK_GRP0_SET(0);
964 CRIS_LED_NETWORK_GRP1_SET(0);
965 CRIS_LED_ACTIVE_SET(0);
966 CRIS_LED_DISK_READ(0);
967 CRIS_LED_DISK_WRITE(0);
968
969 int res2 = request_irq(GIO_INTR_VECT, gpio_interrupt,
970 IRQF_SHARED | IRQF_DISABLED, "gpio", &alarmlist);
971 if (res2) {
972 printk(KERN_ERR "err: irq for gpio\n");
973 return res2;
974 }
975
976 /* No IRQs by default. */
977 REG_WR_INT(gio, regi_gio, rw_intr_pins, 0);
978
979 #ifdef CONFIG_ETRAX_VIRTUAL_GPIO
980 virtual_gpio_init();
981 #endif
982
983 return res;
984 }
985
986 /* this makes sure that gpio_init is called during kernel boot */
987
988 module_init(gpio_init);
Linux for Ginger Game Console