drivers/net/irda/mcs7780.c

   1 /*****************************************************************************
   2 *
   3 * Filename:      mcs7780.c
   4 * Version:       0.4-alpha
   5 * Description:   Irda MosChip USB Dongle Driver
   6 * Authors:       Lukasz Stelmach <stlman@poczta.fm>
   7 *                Brian Pugh <bpugh@cs.pdx.edu>
   8 *                Judy Fischbach <jfisch@cs.pdx.edu>
   9 *
  10 *       Based on stir4200 driver, but some things done differently.
  11 *       Based on earlier driver by Paul Stewart <stewart@parc.com>
  12 *
  13 *       Copyright (C) 2000, Roman Weissgaerber <weissg@vienna.at>
  14 *       Copyright (C) 2001, Dag Brattli <dag@brattli.net>
  15 *       Copyright (C) 2001, Jean Tourrilhes <jt@hpl.hp.com>
  16 *       Copyright (C) 2004, Stephen Hemminger <shemminger@osdl.org>
  17 *       Copyright (C) 2005, Lukasz Stelmach <stlman@poczta.fm>
  18 *       Copyright (C) 2005, Brian Pugh <bpugh@cs.pdx.edu>
  19 *       Copyright (C) 2005, Judy Fischbach <jfisch@cs.pdx.edu>
  20 *
  21 *       This program is free software; you can redistribute it and/or modify
  22 *       it under the terms of the GNU General Public License as published by
  23 *       the Free Software Foundation; either version 2 of the License, or
  24 *       (at your option) any later version.
  25 *
  26 *       This program is distributed in the hope that it will be useful,
  27 *       but WITHOUT ANY WARRANTY; without even the implied warranty of
  28 *       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  29 *       GNU General Public License for more details.
  30 *
  31 *       You should have received a copy of the GNU General Public License
  32 *       along with this program; if not, write to the Free Software
  33 *       Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  34 *
  35 *****************************************************************************/
  36
  37 /*
  38  * MCS7780 is a simple USB to IrDA bridge by MosChip. It is neither
  39  * compatibile with irda-usb nor with stir4200. Although it is quite
  40  * similar to the later as far as general idea of operation is concerned.
  41  * That is it requires the software to do all the framing job at SIR speeds.
  42  * The hardware does take care of the framing at MIR and FIR speeds.
  43  * It supports all speeds from 2400 through 4Mbps
  44  */
  45
  46 #include <linux/module.h>
  47 #include <linux/moduleparam.h>
  48 #include <linux/kernel.h>
  49 #include <linux/types.h>
  50 #include <linux/errno.h>
  51 #include <linux/init.h>
  52 #include <linux/slab.h>
  53 #include <linux/kref.h>
  54 #include <linux/usb.h>
  55 #include <linux/device.h>
  56 #include <linux/crc32.h>
  57
  58 #include <asm/unaligned.h>
  59 #include <asm/byteorder.h>
  60 #include <asm/uaccess.h>
  61
  62 #include <net/irda/irda.h>
  63 #include <net/irda/wrapper.h>
  64 #include <net/irda/crc.h>
  65
  66 #include "mcs7780.h"
  67
  68 #define MCS_VENDOR_ID 0x9710
  69 #define MCS_PRODUCT_ID 0x7780
  70
  71 static struct usb_device_id mcs_table[] = {
  72         /* MosChip Corp.,  MCS7780 FIR-USB Adapter */
  73         {USB_DEVICE(MCS_VENDOR_ID, MCS_PRODUCT_ID)},
  74         {},
  75 };
  76
  77 MODULE_AUTHOR("Brian Pugh <bpugh@cs.pdx.edu>");
  78 MODULE_DESCRIPTION("IrDA-USB Dongle Driver for MosChip MCS7780");
  79 MODULE_VERSION("0.3alpha");
  80 MODULE_LICENSE("GPL");
  81
  82 MODULE_DEVICE_TABLE(usb, mcs_table);
  83
  84 static int qos_mtt_bits = 0x07 /* > 1ms */ ;
  85 module_param(qos_mtt_bits, int, 0);
  86 MODULE_PARM_DESC(qos_mtt_bits, "Minimum Turn Time");
  87
  88 static int receive_mode = 0x1;
  89 module_param(receive_mode, int, 0);
  90 MODULE_PARM_DESC(receive_mode,
  91                  "Receive mode of the device (1:fast, 0:slow, default:1)");
  92
  93 static int sir_tweak = 1;
  94 module_param(sir_tweak, int, 0444);
  95 MODULE_PARM_DESC(sir_tweak,
  96                  "Default pulse width (1:1.6us, 0:3/16 bit, default:1).");
  97
  98 static int transceiver_type = MCS_TSC_VISHAY;
  99 module_param(transceiver_type, int, 0444);
 100 MODULE_PARM_DESC(transceiver_type, "IR transceiver type, see mcs7780.h.");
 101
 102 static struct usb_driver mcs_driver = {
 103         .name = "mcs7780",
 104         .probe = mcs_probe,
 105         .disconnect = mcs_disconnect,
 106         .id_table = mcs_table,
 107 };
 108
 109 /* speed flag selection by direct addressing.
 110 addr = (speed >> 8) & 0x0f
 111
 112 0x1   57600      0x2  115200     0x4 1152000     0x5    9600
 113 0x6   38400      0x9    2400     0xa  576000     0xb   19200
 114
 115 4Mbps (or 2400) must be checked separately. Since it also has
 116 to be programmed in a different manner that is not a big problem.
 117 */
 118 static __u16 mcs_speed_set[16] = { 0,
 119         MCS_SPEED_57600,
 120         MCS_SPEED_115200,
 121         0,
 122         MCS_SPEED_1152000,
 123         MCS_SPEED_9600,
 124         MCS_SPEED_38400,
 125         0, 0,
 126         MCS_SPEED_2400,
 127         MCS_SPEED_576000,
 128         MCS_SPEED_19200,
 129         0, 0, 0,
 130 };
 131
 132 /* Set given 16 bit register with a 16 bit value. Send control message
 133  * to set dongle register. */
 134 static int mcs_set_reg(struct mcs_cb *mcs, __u16 reg, __u16 val)
 135 {
 136         struct usb_device *dev = mcs->usbdev;
 137         return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ,
 138                                MCS_WR_RTYPE, val, reg, NULL, 0,
 139                                msecs_to_jiffies(MCS_CTRL_TIMEOUT));
 140 }
 141
 142 /* Get 16 bit register value. Send contol message to read dongle register. */
 143 static int mcs_get_reg(struct mcs_cb *mcs, __u16 reg, __u16 * val)
 144 {
 145         struct usb_device *dev = mcs->usbdev;
 146         int ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ,
 147                                   MCS_RD_RTYPE, 0, reg, val, 2,
 148                                   msecs_to_jiffies(MCS_CTRL_TIMEOUT));
 149
 150         return ret;
 151 }
 152
 153 /* Setup a communication between mcs7780 and TFDU chips.  It is described
 154  * in more detail in the data sheet.  The setup sequence puts the the
 155  * vishay tranceiver into high speed mode.  It will also receive SIR speed
 156  * packets but at reduced sensitivity.
 157  */
 158
 159 /* 0: OK 1:ERROR */
 160 static inline int mcs_setup_transceiver_vishay(struct mcs_cb *mcs)
 161 {
 162         int ret = 0;
 163         __u16 rval;
 164
 165         /* mcs_get_reg should read exactly two bytes from the dongle */
 166         ret = mcs_get_reg(mcs, MCS_XCVR_REG, &rval);
 167         if (unlikely(ret != 2)) {
 168                 ret = -EIO;
 169                 goto error;
 170         }
 171
 172         /* The MCS_XCVR_CONF bit puts the transceiver into configuration
 173          * mode.  The MCS_MODE0 bit must start out high (1) and then
 174          * transition to low and the MCS_STFIR and MCS_MODE1 bits must
 175          * be low.
 176          */
 177         rval |= (MCS_MODE0 | MCS_XCVR_CONF);
 178         rval &= ~MCS_STFIR;
 179         rval &= ~MCS_MODE1;
 180         ret = mcs_set_reg(mcs, MCS_XCVR_REG, rval);
 181         if (unlikely(ret))
 182                 goto error;
 183
 184         rval &= ~MCS_MODE0;
 185         ret = mcs_set_reg(mcs, MCS_XCVR_REG, rval);
 186         if (unlikely(ret))
 187                 goto error;
 188
 189         rval &= ~MCS_XCVR_CONF;
 190         ret = mcs_set_reg(mcs, MCS_XCVR_REG, rval);
 191         if (unlikely(ret))
 192                 goto error;
 193
 194         ret = 0;
 195         error:
 196                 return ret;
 197 }
 198
 199 /* Setup a communication between mcs7780 and agilent chip. */
 200 static inline int mcs_setup_transceiver_agilent(struct mcs_cb *mcs)
 201 {
 202         IRDA_WARNING("This transceiver type is not supported yet.\n");
 203         return 1;
 204 }
 205
 206 /* Setup a communication between mcs7780 and sharp chip. */
 207 static inline int mcs_setup_transceiver_sharp(struct mcs_cb *mcs)
 208 {
 209         IRDA_WARNING("This transceiver type is not supported yet.\n");
 210         return 1;
 211 }
 212
 213 /* Common setup for all transceivers */
 214 static inline int mcs_setup_transceiver(struct mcs_cb *mcs)
 215 {
 216         int ret = 0;
 217         __u16 rval;
 218         char *msg;
 219
 220         msg = "Basic transceiver setup error.";
 221
 222         /* read value of MODE Register, set the DRIVER and RESET bits
 223         * and write value back out to MODE Register
 224         */
 225         ret = mcs_get_reg(mcs, MCS_MODE_REG, &rval);
 226         if(unlikely(ret != 2))
 227                 goto error;
 228         rval |= MCS_DRIVER;     /* put the mcs7780 into configuration mode. */
 229         ret = mcs_set_reg(mcs, MCS_MODE_REG, rval);
 230         if(unlikely(ret))
 231                 goto error;
 232
 233         rval = 0;               /* set min pulse width to 0 initially. */
 234         ret = mcs_set_reg(mcs, MCS_MINRXPW_REG, rval);
 235         if(unlikely(ret))
 236                 goto error;
 237
 238         ret = mcs_get_reg(mcs, MCS_MODE_REG, &rval);
 239         if(unlikely(ret != 2))
 240                 goto error;
 241
 242         rval &= ~MCS_FIR;       /* turn off fir mode. */
 243         if(mcs->sir_tweak)
 244                 rval |= MCS_SIR16US;    /* 1.6us pulse width */
 245         else
 246                 rval &= ~MCS_SIR16US;   /* 3/16 bit time pulse width */
 247
 248         /* make sure ask mode and back to back packets are off. */
 249         rval &= ~(MCS_BBTG | MCS_ASK);
 250
 251         rval &= ~MCS_SPEED_MASK;
 252         rval |= MCS_SPEED_9600;         /* make sure initial speed is 9600. */
 253         mcs->speed = 9600;
 254         mcs->new_speed = 0;             /* new_speed is set to 0 */
 255         rval &= ~MCS_PLLPWDN;           /* disable power down. */
 256
 257         /* make sure device determines direction and that the auto send sip
 258          * pulse are on.
 259          */
 260         rval |= MCS_DTD | MCS_SIPEN;
 261
 262         ret = mcs_set_reg(mcs, MCS_MODE_REG, rval);
 263         if(unlikely(ret))
 264                 goto error;
 265
 266         msg = "transceiver model specific setup error.";
 267         switch (mcs->transceiver_type) {
 268         case MCS_TSC_VISHAY:
 269                 ret = mcs_setup_transceiver_vishay(mcs);
 270                 break;
 271
 272         case MCS_TSC_SHARP:
 273                 ret = mcs_setup_transceiver_sharp(mcs);
 274                 break;
 275
 276         case MCS_TSC_AGILENT:
 277                 ret = mcs_setup_transceiver_agilent(mcs);
 278                 break;
 279
 280         default:
 281                 IRDA_WARNING("Unknown transceiver type: %d\n",
 282                              mcs->transceiver_type);
 283                 ret = 1;
 284         }
 285         if (unlikely(ret))
 286                 goto error;
 287
 288         /* If transceiver is not SHARP, then if receive mode set
 289         * on the RXFAST bit in the XCVR Register otherwise unset it
 290         */
 291         if (mcs->transceiver_type != MCS_TSC_SHARP) {
 292
 293                 ret = mcs_get_reg(mcs, MCS_XCVR_REG, &rval);
 294                 if (unlikely(ret != 2))
 295                         goto error;
 296                 if (mcs->receive_mode)
 297                         rval |= MCS_RXFAST;
 298                 else
 299                         rval &= ~MCS_RXFAST;
 300                 ret = mcs_set_reg(mcs, MCS_XCVR_REG, rval);
 301                 if (unlikely(ret))
 302                         goto error;
 303         }
 304
 305         msg = "transceiver reset.";
 306
 307         ret = mcs_get_reg(mcs, MCS_MODE_REG, &rval);
 308         if (unlikely(ret != 2))
 309                 goto error;
 310
 311         /* reset the mcs7780 so all changes take effect. */
 312         rval &= ~MCS_RESET;
 313         ret = mcs_set_reg(mcs, MCS_MODE_REG, rval);
 314         if (unlikely(ret))
 315                 goto error;
 316         else
 317                 return ret;
 318
 319 error:
 320         IRDA_ERROR("%s\n", msg);
 321         return ret;
 322 }
 323
 324 /* Wraps the data in format for SIR */
 325 static inline int mcs_wrap_sir_skb(struct sk_buff *skb, __u8 * buf)
 326 {
 327         int wraplen;
 328
 329         /* 2: full frame length, including "the length" */
 330         wraplen = async_wrap_skb(skb, buf + 2, 4094);
 331
 332         wraplen += 2;
 333         buf[0] = wraplen & 0xff;
 334         buf[1] = (wraplen >> 8) & 0xff;
 335
 336         return wraplen;
 337 }
 338
 339 /* Wraps the data in format for FIR */
 340 static unsigned mcs_wrap_fir_skb(const struct sk_buff *skb, __u8 *buf)
 341 {
 342         unsigned int len = 0;
 343         __u32 fcs = ~(crc32_le(~0, skb->data, skb->len));
 344
 345         /* add 2 bytes for length value and 4 bytes for fcs. */
 346         len = skb->len + 6;
 347
 348         /* The mcs7780 requires that the first two bytes are the packet
 349          * length in little endian order.  Note: the length value includes
 350          * the two bytes for the length value itself.
 351          */
 352         buf[0] = len & 0xff;
 353         buf[1] = (len >> 8) & 0xff;
 354         /* copy the data into the tx buffer. */
 355         skb_copy_from_linear_data(skb, buf + 2, skb->len);
 356         /* put the fcs in the last four bytes in little endian order. */
 357         buf[len - 4] = fcs & 0xff;
 358         buf[len - 3] = (fcs >> 8) & 0xff;
 359         buf[len - 2] = (fcs >> 16) & 0xff;
 360         buf[len - 1] = (fcs >> 24) & 0xff;
 361
 362         return len;
 363 }
 364
 365 /* Wraps the data in format for MIR */
 366 static unsigned mcs_wrap_mir_skb(const struct sk_buff *skb, __u8 *buf)
 367 {
 368         __u16 fcs = 0;
 369         int len = skb->len + 4;
 370
 371         fcs = ~(irda_calc_crc16(~fcs, skb->data, skb->len));
 372         /* put the total packet length in first.  Note: packet length
 373          * value includes the two bytes that hold the packet length
 374          * itself.
 375          */
 376         buf[0] = len & 0xff;
 377         buf[1] = (len >> 8) & 0xff;
 378         /* copy the data */
 379         skb_copy_from_linear_data(skb, buf + 2, skb->len);
 380         /* put the fcs in last two bytes in little endian order. */
 381         buf[len - 2] = fcs & 0xff;
 382         buf[len - 1] = (fcs >> 8) & 0xff;
 383
 384         return len;
 385 }
 386
 387 /* Unwrap received packets at MIR speed.  A 16 bit crc_ccitt checksum is
 388  * used for the fcs.  When performed over the entire packet the result
 389  * should be GOOD_FCS = 0xf0b8.  Hands the unwrapped data off to the IrDA
 390  * layer via a sk_buff.
 391  */
 392 static void mcs_unwrap_mir(struct mcs_cb *mcs, __u8 *buf, int len)
 393 {
 394         __u16 fcs;
 395         int new_len;
 396         struct sk_buff *skb;
 397
 398         /* Assume that the frames are going to fill a single packet
 399          * rather than span multiple packets.
 400          */
 401
 402         new_len = len - 2;
 403         if(unlikely(new_len <= 0)) {
 404                 IRDA_ERROR("%s short frame length %d\n",
 405                              mcs->netdev->name, new_len);
 406                 ++mcs->stats.rx_errors;
 407                 ++mcs->stats.rx_length_errors;
 408                 return;
 409         }
 410         fcs = 0;
 411         fcs = irda_calc_crc16(~fcs, buf, len);
 412
 413         if(fcs != GOOD_FCS) {
 414                 IRDA_ERROR("crc error calc 0x%x len %d\n",
 415                            fcs, new_len);
 416                 mcs->stats.rx_errors++;
 417                 mcs->stats.rx_crc_errors++;
 418                 return;
 419         }
 420
 421         skb = dev_alloc_skb(new_len + 1);
 422         if(unlikely(!skb)) {
 423                 ++mcs->stats.rx_dropped;
 424                 return;
 425         }
 426
 427         skb_reserve(skb, 1);
 428         skb_copy_to_linear_data(skb, buf, new_len);
 429         skb_put(skb, new_len);
 430         skb_reset_mac_header(skb);
 431         skb->protocol = htons(ETH_P_IRDA);
 432         skb->dev = mcs->netdev;
 433
 434         netif_rx(skb);
 435
 436         mcs->stats.rx_packets++;
 437         mcs->stats.rx_bytes += new_len;
 438
 439         return;
 440 }
 441
 442 /* Unwrap received packets at FIR speed.  A 32 bit crc_ccitt checksum is
 443  * used for the fcs.  Hands the unwrapped data off to the IrDA
 444  * layer via a sk_buff.
 445  */
 446 static void mcs_unwrap_fir(struct mcs_cb *mcs, __u8 *buf, int len)
 447 {
 448         __u32 fcs;
 449         int new_len;
 450         struct sk_buff *skb;
 451
 452         /* Assume that the frames are going to fill a single packet
 453          * rather than span multiple packets.  This is most likely a false
 454          * assumption.
 455          */
 456
 457         new_len = len - 4;
 458         if(unlikely(new_len <= 0)) {
 459                 IRDA_ERROR("%s short frame length %d\n",
 460                            mcs->netdev->name, new_len);
 461                 ++mcs->stats.rx_errors;
 462                 ++mcs->stats.rx_length_errors;
 463                 return;
 464         }
 465
 466         fcs = ~(crc32_le(~0, buf, new_len));
 467         if(fcs != get_unaligned_le32(buf + new_len)) {
 468                 IRDA_ERROR("crc error calc 0x%x len %d\n", fcs, new_len);
 469                 mcs->stats.rx_errors++;
 470                 mcs->stats.rx_crc_errors++;
 471                 return;
 472         }
 473
 474         skb = dev_alloc_skb(new_len + 1);
 475         if(unlikely(!skb)) {
 476                 ++mcs->stats.rx_dropped;
 477                 return;
 478         }
 479
 480         skb_reserve(skb, 1);
 481         skb_copy_to_linear_data(skb, buf, new_len);
 482         skb_put(skb, new_len);
 483         skb_reset_mac_header(skb);
 484         skb->protocol = htons(ETH_P_IRDA);
 485         skb->dev = mcs->netdev;
 486
 487         netif_rx(skb);
 488
 489         mcs->stats.rx_packets++;
 490         mcs->stats.rx_bytes += new_len;
 491
 492         return;
 493 }
 494
 495
 496 /* Allocates urbs for both receive and transmit.
 497  * If alloc fails return error code 0 (fail) otherwise
 498  * return error code 1 (success).
 499  */
 500 static inline int mcs_setup_urbs(struct mcs_cb *mcs)
 501 {
 502         mcs->rx_urb = NULL;
 503
 504         mcs->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
 505         if (!mcs->tx_urb)
 506                 return 0;
 507
 508         mcs->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
 509         if (!mcs->rx_urb)
 510                 return 0;
 511
 512         return 1;
 513 }
 514
 515 /* Sets up state to be initially outside frame, gets receive urb,
 516  * sets status to successful and then submits the urb to start
 517  * receiving the data.
 518  */
 519 static inline int mcs_receive_start(struct mcs_cb *mcs)
 520 {
 521         mcs->rx_buff.in_frame = FALSE;
 522         mcs->rx_buff.state = OUTSIDE_FRAME;
 523
 524         usb_fill_bulk_urb(mcs->rx_urb, mcs->usbdev,
 525                           usb_rcvbulkpipe(mcs->usbdev, mcs->ep_in),
 526                           mcs->in_buf, 4096, mcs_receive_irq, mcs);
 527
 528         mcs->rx_urb->status = 0;
 529         return usb_submit_urb(mcs->rx_urb, GFP_KERNEL);
 530 }
 531
 532 /* Finds the in and out endpoints for the mcs control block */
 533 static inline int mcs_find_endpoints(struct mcs_cb *mcs,
 534                                      struct usb_host_endpoint *ep, int epnum)
 535 {
 536         int i;
 537         int ret = 0;
 538
 539         /* If no place to store the endpoints just return */
 540         if (!ep)
 541                 return ret;
 542
 543         /* cycle through all endpoints, find the first two that are DIR_IN */
 544         for (i = 0; i < epnum; i++) {
 545                 if (ep[i].desc.bEndpointAddress & USB_DIR_IN)
 546                         mcs->ep_in = ep[i].desc.bEndpointAddress;
 547                 else
 548                         mcs->ep_out = ep[i].desc.bEndpointAddress;
 549
 550                 /* MosChip says that the chip has only two bulk
 551                  * endpoints. Find one for each direction and move on.
 552                  */
 553                 if ((mcs->ep_in != 0) && (mcs->ep_out != 0)) {
 554                         ret = 1;
 555                         break;
 556                 }
 557         }
 558
 559         return ret;
 560 }
 561
 562 static void mcs_speed_work(struct work_struct *work)
 563 {
 564         struct mcs_cb *mcs = container_of(work, struct mcs_cb, work);
 565         struct net_device *netdev = mcs->netdev;
 566
 567         mcs_speed_change(mcs);
 568         netif_wake_queue(netdev);
 569 }
 570
 571 /* Function to change the speed of the mcs7780.  Fully supports SIR,
 572  * MIR, and FIR speeds.
 573  */
 574 static int mcs_speed_change(struct mcs_cb *mcs)
 575 {
 576         int ret = 0;
 577         int rst = 0;
 578         int cnt = 0;
 579         __u16 nspeed;
 580         __u16 rval;
 581
 582         nspeed = mcs_speed_set[(mcs->new_speed >> 8) & 0x0f];
 583
 584         do {
 585                 mcs_get_reg(mcs, MCS_RESV_REG, &rval);
 586         } while(cnt++ < 100 && (rval & MCS_IRINTX));
 587
 588         if(cnt >= 100) {
 589                 IRDA_ERROR("unable to change speed\n");
 590                 ret = -EIO;
 591                 goto error;
 592         }
 593
 594         mcs_get_reg(mcs, MCS_MODE_REG, &rval);
 595
 596         /* MINRXPW values recomended by MosChip */
 597         if (mcs->new_speed <= 115200) {
 598                 rval &= ~MCS_FIR;
 599
 600                 if ((rst = (mcs->speed > 115200)))
 601                         mcs_set_reg(mcs, MCS_MINRXPW_REG, 0);
 602
 603         } else if (mcs->new_speed <= 1152000) {
 604                 rval &= ~MCS_FIR;
 605
 606                 if ((rst = !(mcs->speed == 576000 || mcs->speed == 1152000)))
 607                         mcs_set_reg(mcs, MCS_MINRXPW_REG, 5);
 608
 609         } else {
 610                 rval |= MCS_FIR;
 611
 612                 if ((rst = (mcs->speed != 4000000)))
 613                         mcs_set_reg(mcs, MCS_MINRXPW_REG, 5);
 614
 615         }
 616
 617         rval &= ~MCS_SPEED_MASK;
 618         rval |= nspeed;
 619
 620         ret = mcs_set_reg(mcs, MCS_MODE_REG, rval);
 621         if (unlikely(ret))
 622                 goto error;
 623
 624         if (rst)
 625                 switch (mcs->transceiver_type) {
 626                 case MCS_TSC_VISHAY:
 627                         ret = mcs_setup_transceiver_vishay(mcs);
 628                         break;
 629
 630                 case MCS_TSC_SHARP:
 631                         ret = mcs_setup_transceiver_sharp(mcs);
 632                         break;
 633
 634                 case MCS_TSC_AGILENT:
 635                         ret = mcs_setup_transceiver_agilent(mcs);
 636                         break;
 637
 638                 default:
 639                         ret = 1;
 640                         IRDA_WARNING("Unknown transceiver type: %d\n",
 641                                      mcs->transceiver_type);
 642                 }
 643         if (unlikely(ret))
 644                 goto error;
 645
 646         mcs_get_reg(mcs, MCS_MODE_REG, &rval);
 647         rval &= ~MCS_RESET;
 648         ret = mcs_set_reg(mcs, MCS_MODE_REG, rval);
 649
 650         mcs->speed = mcs->new_speed;
 651         error:
 652                 mcs->new_speed = 0;
 653                 return ret;
 654 }
 655
 656 /* Ioctl calls not supported at this time.  Can be an area of future work. */
 657 static int mcs_net_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
 658 {
 659         /* struct if_irda_req *irq = (struct if_irda_req *)rq; */
 660         /* struct mcs_cb *mcs = netdev_priv(netdev); */
 661         int ret = 0;
 662
 663         switch (cmd) {
 664         default:
 665                 ret = -EOPNOTSUPP;
 666         }
 667
 668         return ret;
 669 }
 670
 671 /* Network device is taken down, done by "ifconfig irda0 down" */
 672 static int mcs_net_close(struct net_device *netdev)
 673 {
 674         int ret = 0;
 675         struct mcs_cb *mcs = netdev_priv(netdev);
 676
 677         /* Stop transmit processing */
 678         netif_stop_queue(netdev);
 679
 680         kfree_skb(mcs->rx_buff.skb);
 681
 682         /* kill and free the receive and transmit URBs */
 683         usb_kill_urb(mcs->rx_urb);
 684         usb_free_urb(mcs->rx_urb);
 685         usb_kill_urb(mcs->tx_urb);
 686         usb_free_urb(mcs->tx_urb);
 687
 688         /* Stop and remove instance of IrLAP */
 689         if (mcs->irlap)
 690                 irlap_close(mcs->irlap);
 691
 692         mcs->irlap = NULL;
 693         return ret;
 694 }
 695
 696 /* Network device is taken up, done by "ifconfig irda0 up" */
 697 static int mcs_net_open(struct net_device *netdev)
 698 {
 699         struct mcs_cb *mcs = netdev_priv(netdev);
 700         char hwname[16];
 701         int ret = 0;
 702
 703         ret = usb_clear_halt(mcs->usbdev,
 704                              usb_sndbulkpipe(mcs->usbdev, mcs->ep_in));
 705         if (ret)
 706                 goto error1;
 707         ret = usb_clear_halt(mcs->usbdev,
 708                              usb_rcvbulkpipe(mcs->usbdev, mcs->ep_out));
 709         if (ret)
 710                 goto error1;
 711
 712         ret = mcs_setup_transceiver(mcs);
 713         if (ret)
 714                 goto error1;
 715
 716         ret = -ENOMEM;
 717
 718         /* Initialize for SIR/FIR to copy data directly into skb.  */
 719         mcs->receiving = 0;
 720         mcs->rx_buff.truesize = IRDA_SKB_MAX_MTU;
 721         mcs->rx_buff.skb = dev_alloc_skb(IRDA_SKB_MAX_MTU);
 722         if (!mcs->rx_buff.skb)
 723                 goto error1;
 724
 725         skb_reserve(mcs->rx_buff.skb, 1);
 726         mcs->rx_buff.head = mcs->rx_buff.skb->data;
 727         do_gettimeofday(&mcs->rx_time);
 728
 729         /*
 730          * Now that everything should be initialized properly,
 731          * Open new IrLAP layer instance to take care of us...
 732          * Note : will send immediately a speed change...
 733          */
 734         sprintf(hwname, "usb#%d", mcs->usbdev->devnum);
 735         mcs->irlap = irlap_open(netdev, &mcs->qos, hwname);
 736         if (!mcs->irlap) {
 737                 IRDA_ERROR("mcs7780: irlap_open failed\n");
 738                 goto error2;
 739         }
 740
 741         if (!mcs_setup_urbs(mcs))
 742         goto error3;
 743
 744         ret = mcs_receive_start(mcs);
 745         if (ret)
 746                 goto error3;
 747
 748         netif_start_queue(netdev);
 749         return 0;
 750
 751         error3:
 752                 irlap_close(mcs->irlap);
 753         error2:
 754                 kfree_skb(mcs->rx_buff.skb);
 755         error1:
 756                 return ret;
 757 }
 758
 759
 760 /* Get device stats for /proc/net/dev and ifconfig */
 761 static struct net_device_stats *mcs_net_get_stats(struct net_device *netdev)
 762 {
 763         struct mcs_cb *mcs = netdev_priv(netdev);
 764         return &mcs->stats;
 765 }
 766
 767 /* Receive callback function.  */
 768 static void mcs_receive_irq(struct urb *urb)
 769 {
 770         __u8 *bytes;
 771         struct mcs_cb *mcs = urb->context;
 772         int i;
 773         int ret;
 774
 775         if (!netif_running(mcs->netdev))
 776                 return;
 777
 778         if (urb->status)
 779                 return;
 780
 781         if (urb->actual_length > 0) {
 782                 bytes = urb->transfer_buffer;
 783
 784                 /* MCS returns frames without BOF and EOF
 785                  * I assume it returns whole frames.
 786                  */
 787                 /* SIR speed */
 788                 if(mcs->speed < 576000) {
 789                         async_unwrap_char(mcs->netdev, &mcs->stats,
 790                                   &mcs->rx_buff, 0xc0);
 791
 792                         for (i = 0; i < urb->actual_length; i++)
 793                                 async_unwrap_char(mcs->netdev, &mcs->stats,
 794                                           &mcs->rx_buff, bytes[i]);
 795
 796                         async_unwrap_char(mcs->netdev, &mcs->stats,
 797                                   &mcs->rx_buff, 0xc1);
 798                 }
 799                 /* MIR speed */
 800                 else if(mcs->speed == 576000 || mcs->speed == 1152000) {
 801                         mcs_unwrap_mir(mcs, urb->transfer_buffer,
 802                                 urb->actual_length);
 803                 }
 804                 /* FIR speed */
 805                 else {
 806                         mcs_unwrap_fir(mcs, urb->transfer_buffer,
 807                                 urb->actual_length);
 808                 }
 809                 mcs->netdev->last_rx = jiffies;
 810                 do_gettimeofday(&mcs->rx_time);
 811         }
 812
 813         ret = usb_submit_urb(urb, GFP_ATOMIC);
 814 }
 815
 816 /* Transmit callback funtion.  */
 817 static void mcs_send_irq(struct urb *urb)
 818 {
 819         struct mcs_cb *mcs = urb->context;
 820         struct net_device *ndev = mcs->netdev;
 821
 822         if (unlikely(mcs->new_speed))
 823                 schedule_work(&mcs->work);
 824         else
 825                 netif_wake_queue(ndev);
 826 }
 827
 828 /* Transmit callback funtion.  */
 829 static int mcs_hard_xmit(struct sk_buff *skb, struct net_device *ndev)
 830 {
 831         unsigned long flags;
 832         struct mcs_cb *mcs;
 833         int wraplen;
 834         int ret = 0;
 835
 836
 837         if (skb == NULL || ndev == NULL)
 838                 return -EINVAL;
 839
 840         netif_stop_queue(ndev);
 841         mcs = netdev_priv(ndev);
 842
 843         spin_lock_irqsave(&mcs->lock, flags);
 844
 845         mcs->new_speed = irda_get_next_speed(skb);
 846         if (likely(mcs->new_speed == mcs->speed))
 847                 mcs->new_speed = 0;
 848
 849         /* SIR speed */
 850         if(mcs->speed < 576000) {
 851                 wraplen = mcs_wrap_sir_skb(skb, mcs->out_buf);
 852         }
 853         /* MIR speed */
 854         else if(mcs->speed == 576000 || mcs->speed == 1152000) {
 855                 wraplen = mcs_wrap_mir_skb(skb, mcs->out_buf);
 856         }
 857         /* FIR speed */
 858         else {
 859                 wraplen = mcs_wrap_fir_skb(skb, mcs->out_buf);
 860         }
 861         usb_fill_bulk_urb(mcs->tx_urb, mcs->usbdev,
 862                           usb_sndbulkpipe(mcs->usbdev, mcs->ep_out),
 863                           mcs->out_buf, wraplen, mcs_send_irq, mcs);
 864
 865         if ((ret = usb_submit_urb(mcs->tx_urb, GFP_ATOMIC))) {
 866                 IRDA_ERROR("failed tx_urb: %d\n", ret);
 867                 switch (ret) {
 868                 case -ENODEV:
 869                 case -EPIPE:
 870                         break;
 871                 default:
 872                         mcs->stats.tx_errors++;
 873                         netif_start_queue(ndev);
 874                 }
 875         } else {
 876                 mcs->stats.tx_packets++;
 877                 mcs->stats.tx_bytes += skb->len;
 878         }
 879
 880         dev_kfree_skb(skb);
 881         spin_unlock_irqrestore(&mcs->lock, flags);
 882         return ret;
 883 }
 884
 885 /*
 886  * This function is called by the USB subsystem for each new device in the
 887  * system.  Need to verify the device and if it is, then start handling it.
 888  */
 889 static int mcs_probe(struct usb_interface *intf,
 890                      const struct usb_device_id *id)
 891 {
 892         struct usb_device *udev = interface_to_usbdev(intf);
 893         struct net_device *ndev = NULL;
 894         struct mcs_cb *mcs;
 895         int ret = -ENOMEM;
 896
 897         ndev = alloc_irdadev(sizeof(*mcs));
 898         if (!ndev)
 899                 goto error1;
 900
 901         IRDA_DEBUG(1, "MCS7780 USB-IrDA bridge found at %d.\n", udev->devnum);
 902
 903         SET_NETDEV_DEV(ndev, &intf->dev);
 904
 905         ret = usb_reset_configuration(udev);
 906         if (ret != 0) {
 907                 IRDA_ERROR("mcs7780: usb reset configuration failed\n");
 908                 goto error2;
 909         }
 910
 911         mcs = netdev_priv(ndev);
 912         mcs->usbdev = udev;
 913         mcs->netdev = ndev;
 914         spin_lock_init(&mcs->lock);
 915
 916         /* Initialize QoS for this device */
 917         irda_init_max_qos_capabilies(&mcs->qos);
 918
 919         /* That's the Rx capability. */
 920         mcs->qos.baud_rate.bits &=
 921             IR_2400 | IR_9600 | IR_19200 | IR_38400 | IR_57600 | IR_115200
 922                 | IR_576000 | IR_1152000 | (IR_4000000 << 8);
 923
 924
 925         mcs->qos.min_turn_time.bits &= qos_mtt_bits;
 926         irda_qos_bits_to_value(&mcs->qos);
 927
 928         /* Speed change work initialisation*/
 929         INIT_WORK(&mcs->work, mcs_speed_work);
 930
 931         /* Override the network functions we need to use */
 932         ndev->hard_start_xmit = mcs_hard_xmit;
 933         ndev->open = mcs_net_open;
 934         ndev->stop = mcs_net_close;
 935         ndev->get_stats = mcs_net_get_stats;
 936         ndev->do_ioctl = mcs_net_ioctl;
 937
 938         if (!intf->cur_altsetting)
 939                 goto error2;
 940
 941         ret = mcs_find_endpoints(mcs, intf->cur_altsetting->endpoint,
 942                                  intf->cur_altsetting->desc.bNumEndpoints);
 943         if (!ret) {
 944                 ret = -ENODEV;
 945                 goto error2;
 946         }
 947
 948         ret = register_netdev(ndev);
 949         if (ret != 0)
 950                 goto error2;
 951
 952         IRDA_DEBUG(1, "IrDA: Registered MosChip MCS7780 device as %s\n",
 953                    ndev->name);
 954
 955         mcs->transceiver_type = transceiver_type;
 956         mcs->sir_tweak = sir_tweak;
 957         mcs->receive_mode = receive_mode;
 958
 959         usb_set_intfdata(intf, mcs);
 960         return 0;
 961
 962         error2:
 963                 free_netdev(ndev);
 964
 965         error1:
 966                 return ret;
 967 }
 968
 969 /* The current device is removed, the USB layer tells us to shut down. */
 970 static void mcs_disconnect(struct usb_interface *intf)
 971 {
 972         struct mcs_cb *mcs = usb_get_intfdata(intf);
 973
 974         if (!mcs)
 975                 return;
 976
 977         flush_scheduled_work();
 978
 979         unregister_netdev(mcs->netdev);
 980         free_netdev(mcs->netdev);
 981
 982         usb_set_intfdata(intf, NULL);
 983         IRDA_DEBUG(0, "MCS7780 now disconnected.\n");
 984 }
 985
 986 /* Module insertion */
 987 static int __init mcs_init(void)
 988 {
 989         int result;
 990
 991         /* register this driver with the USB subsystem */
 992         result = usb_register(&mcs_driver);
 993         if (result)
 994                 IRDA_ERROR("usb_register failed. Error number %d\n", result);
 995
 996         return result;
 997 }
 998 module_init(mcs_init);
 999
1000 /* Module removal */
1001 static void __exit mcs_exit(void)
1002 {
1003         /* deregister this driver with the USB subsystem */
1004         usb_deregister(&mcs_driver);
1005 }
1006 module_exit(mcs_exit);
1007