drivers/usb/host/ohci-hcd.c

   1 /*
   2  * OHCI HCD (Host Controller Driver) for USB.
   3  *
   4  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
   5  * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
   6  *
   7  * [ Initialisation is based on Linus'  ]
   8  * [ uhci code and gregs ohci fragments ]
   9  * [ (C) Copyright 1999 Linus Torvalds  ]
  10  * [ (C) Copyright 1999 Gregory P. Smith]
  11  *
  12  *
  13  * OHCI is the main "non-Intel/VIA" standard for USB 1.1 host controller
  14  * interfaces (though some non-x86 Intel chips use it).  It supports
  15  * smarter hardware than UHCI.  A download link for the spec available
  16  * through the http://www.usb.org website.
  17  *
  18  * This file is licenced under the GPL.
  19  */
  20
  21 #include <linux/module.h>
  22 #include <linux/moduleparam.h>
  23 #include <linux/pci.h>
  24 #include <linux/kernel.h>
  25 #include <linux/delay.h>
  26 #include <linux/ioport.h>
  27 #include <linux/sched.h>
  28 #include <linux/slab.h>
  29 #include <linux/errno.h>
  30 #include <linux/init.h>
  31 #include <linux/timer.h>
  32 #include <linux/list.h>
  33 #include <linux/usb.h>
  34 #include <linux/usb/otg.h>
  35 #include <linux/dma-mapping.h>
  36 #include <linux/dmapool.h>
  37 #include <linux/workqueue.h>
  38 #include <linux/debugfs.h>
  39
  40 #include <asm/io.h>
  41 #include <asm/irq.h>
  42 #include <asm/system.h>
  43 #include <asm/unaligned.h>
  44 #include <asm/byteorder.h>
  45
  46 #include "../core/hcd.h"
  47
  48 #define DRIVER_AUTHOR "Roman Weissgaerber, David Brownell"
  49 #define DRIVER_DESC "USB 1.1 'Open' Host Controller (OHCI) Driver"
  50
  51 /*-------------------------------------------------------------------------*/
  52
  53 #undef OHCI_VERBOSE_DEBUG       /* not always helpful */
  54
  55 /* For initializing controller (mask in an HCFS mode too) */
  56 #define OHCI_CONTROL_INIT       OHCI_CTRL_CBSR
  57 #define OHCI_INTR_INIT \
  58                 (OHCI_INTR_MIE | OHCI_INTR_RHSC | OHCI_INTR_UE \
  59                 | OHCI_INTR_RD | OHCI_INTR_WDH)
  60
  61 #ifdef __hppa__
  62 /* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */
  63 #define IR_DISABLE
  64 #endif
  65
  66 #ifdef CONFIG_ARCH_OMAP
  67 /* OMAP doesn't support IR (no SMM; not needed) */
  68 #define IR_DISABLE
  69 #endif
  70
  71 /*-------------------------------------------------------------------------*/
  72
  73 static const char       hcd_name [] = "ohci_hcd";
  74
  75 #define STATECHANGE_DELAY       msecs_to_jiffies(300)
  76
  77 #include "ohci.h"
  78
  79 static void ohci_dump (struct ohci_hcd *ohci, int verbose);
  80 static int ohci_init (struct ohci_hcd *ohci);
  81 static void ohci_stop (struct usb_hcd *hcd);
  82
  83 #if defined(CONFIG_PM) || defined(CONFIG_PCI)
  84 static int ohci_restart (struct ohci_hcd *ohci);
  85 #endif
  86
  87 #ifdef CONFIG_PCI
  88 static void quirk_amd_pll(int state);
  89 static void amd_iso_dev_put(void);
  90 #else
  91 static inline void quirk_amd_pll(int state)
  92 {
  93         return;
  94 }
  95 static inline void amd_iso_dev_put(void)
  96 {
  97         return;
  98 }
  99 #endif
 100
 101
 102 #include "ohci-hub.c"
 103 #include "ohci-dbg.c"
 104 #include "ohci-mem.c"
 105 #include "ohci-q.c"
 106
 107
 108 /*
 109  * On architectures with edge-triggered interrupts we must never return
 110  * IRQ_NONE.
 111  */
 112 #if defined(CONFIG_SA1111)  /* ... or other edge-triggered systems */
 113 #define IRQ_NOTMINE     IRQ_HANDLED
 114 #else
 115 #define IRQ_NOTMINE     IRQ_NONE
 116 #endif
 117
 118
 119 /* Some boards misreport power switching/overcurrent */
 120 static int distrust_firmware = 1;
 121 module_param (distrust_firmware, bool, 0);
 122 MODULE_PARM_DESC (distrust_firmware,
 123         "true to distrust firmware power/overcurrent setup");
 124
 125 /* Some boards leave IR set wrongly, since they fail BIOS/SMM handshakes */
 126 static int no_handshake = 0;
 127 module_param (no_handshake, bool, 0);
 128 MODULE_PARM_DESC (no_handshake, "true (not default) disables BIOS handshake");
 129
 130 /*-------------------------------------------------------------------------*/
 131
 132 /*
 133  * queue up an urb for anything except the root hub
 134  */
 135 static int ohci_urb_enqueue (
 136         struct usb_hcd  *hcd,
 137         struct urb      *urb,
 138         gfp_t           mem_flags
 139 ) {
 140         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
 141         struct ed       *ed;
 142         urb_priv_t      *urb_priv;
 143         unsigned int    pipe = urb->pipe;
 144         int             i, size = 0;
 145         unsigned long   flags;
 146         int             retval = 0;
 147
 148 #ifdef OHCI_VERBOSE_DEBUG
 149         urb_print(urb, "SUB", usb_pipein(pipe), -EINPROGRESS);
 150 #endif
 151
 152         /* every endpoint has a ed, locate and maybe (re)initialize it */
 153         if (! (ed = ed_get (ohci, urb->ep, urb->dev, pipe, urb->interval)))
 154                 return -ENOMEM;
 155
 156         /* for the private part of the URB we need the number of TDs (size) */
 157         switch (ed->type) {
 158                 case PIPE_CONTROL:
 159                         /* td_submit_urb() doesn't yet handle these */
 160                         if (urb->transfer_buffer_length > 4096)
 161                                 return -EMSGSIZE;
 162
 163                         /* 1 TD for setup, 1 for ACK, plus ... */
 164                         size = 2;
 165                         /* FALLTHROUGH */
 166                 // case PIPE_INTERRUPT:
 167                 // case PIPE_BULK:
 168                 default:
 169                         /* one TD for every 4096 Bytes (can be upto 8K) */
 170                         size += urb->transfer_buffer_length / 4096;
 171                         /* ... and for any remaining bytes ... */
 172                         if ((urb->transfer_buffer_length % 4096) != 0)
 173                                 size++;
 174                         /* ... and maybe a zero length packet to wrap it up */
 175                         if (size == 0)
 176                                 size++;
 177                         else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0
 178                                 && (urb->transfer_buffer_length
 179                                         % usb_maxpacket (urb->dev, pipe,
 180                                                 usb_pipeout (pipe))) == 0)
 181                                 size++;
 182                         break;
 183                 case PIPE_ISOCHRONOUS: /* number of packets from URB */
 184                         size = urb->number_of_packets;
 185                         break;
 186         }
 187
 188         /* allocate the private part of the URB */
 189         urb_priv = kzalloc (sizeof (urb_priv_t) + size * sizeof (struct td *),
 190                         mem_flags);
 191         if (!urb_priv)
 192                 return -ENOMEM;
 193         INIT_LIST_HEAD (&urb_priv->pending);
 194         urb_priv->length = size;
 195         urb_priv->ed = ed;
 196
 197         /* allocate the TDs (deferring hash chain updates) */
 198         for (i = 0; i < size; i++) {
 199                 urb_priv->td [i] = td_alloc (ohci, mem_flags);
 200                 if (!urb_priv->td [i]) {
 201                         urb_priv->length = i;
 202                         urb_free_priv (ohci, urb_priv);
 203                         return -ENOMEM;
 204                 }
 205         }
 206
 207         spin_lock_irqsave (&ohci->lock, flags);
 208
 209         /* don't submit to a dead HC */
 210         if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
 211                 retval = -ENODEV;
 212                 goto fail;
 213         }
 214         if (!HC_IS_RUNNING(hcd->state)) {
 215                 retval = -ENODEV;
 216                 goto fail;
 217         }
 218         retval = usb_hcd_link_urb_to_ep(hcd, urb);
 219         if (retval)
 220                 goto fail;
 221
 222         /* schedule the ed if needed */
 223         if (ed->state == ED_IDLE) {
 224                 retval = ed_schedule (ohci, ed);
 225                 if (retval < 0) {
 226                         usb_hcd_unlink_urb_from_ep(hcd, urb);
 227                         goto fail;
 228                 }
 229                 if (ed->type == PIPE_ISOCHRONOUS) {
 230                         u16     frame = ohci_frame_no(ohci);
 231
 232                         /* delay a few frames before the first TD */
 233                         frame += max_t (u16, 8, ed->interval);
 234                         frame &= ~(ed->interval - 1);
 235                         frame |= ed->branch;
 236                         urb->start_frame = frame;
 237
 238                         /* yes, only URB_ISO_ASAP is supported, and
 239                          * urb->start_frame is never used as input.
 240                          */
 241                 }
 242         } else if (ed->type == PIPE_ISOCHRONOUS)
 243                 urb->start_frame = ed->last_iso + ed->interval;
 244
 245         /* fill the TDs and link them to the ed; and
 246          * enable that part of the schedule, if needed
 247          * and update count of queued periodic urbs
 248          */
 249         urb->hcpriv = urb_priv;
 250         td_submit_urb (ohci, urb);
 251
 252 fail:
 253         if (retval)
 254                 urb_free_priv (ohci, urb_priv);
 255         spin_unlock_irqrestore (&ohci->lock, flags);
 256         return retval;
 257 }
 258
 259 /*
 260  * decouple the URB from the HC queues (TDs, urb_priv).
 261  * reporting is always done
 262  * asynchronously, and we might be dealing with an urb that's
 263  * partially transferred, or an ED with other urbs being unlinked.
 264  */
 265 static int ohci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 266 {
 267         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
 268         unsigned long           flags;
 269         int                     rc;
 270
 271 #ifdef OHCI_VERBOSE_DEBUG
 272         urb_print(urb, "UNLINK", 1, status);
 273 #endif
 274
 275         spin_lock_irqsave (&ohci->lock, flags);
 276         rc = usb_hcd_check_unlink_urb(hcd, urb, status);
 277         if (rc) {
 278                 ;       /* Do nothing */
 279         } else if (HC_IS_RUNNING(hcd->state)) {
 280                 urb_priv_t  *urb_priv;
 281
 282                 /* Unless an IRQ completed the unlink while it was being
 283                  * handed to us, flag it for unlink and giveback, and force
 284                  * some upcoming INTR_SF to call finish_unlinks()
 285                  */
 286                 urb_priv = urb->hcpriv;
 287                 if (urb_priv) {
 288                         if (urb_priv->ed->state == ED_OPER)
 289                                 start_ed_unlink (ohci, urb_priv->ed);
 290                 }
 291         } else {
 292                 /*
 293                  * with HC dead, we won't respect hc queue pointers
 294                  * any more ... just clean up every urb's memory.
 295                  */
 296                 if (urb->hcpriv)
 297                         finish_urb(ohci, urb, status);
 298         }
 299         spin_unlock_irqrestore (&ohci->lock, flags);
 300         return rc;
 301 }
 302
 303 /*-------------------------------------------------------------------------*/
 304
 305 /* frees config/altsetting state for endpoints,
 306  * including ED memory, dummy TD, and bulk/intr data toggle
 307  */
 308
 309 static void
 310 ohci_endpoint_disable (struct usb_hcd *hcd, struct usb_host_endpoint *ep)
 311 {
 312         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
 313         unsigned long           flags;
 314         struct ed               *ed = ep->hcpriv;
 315         unsigned                limit = 1000;
 316
 317         /* ASSERT:  any requests/urbs are being unlinked */
 318         /* ASSERT:  nobody can be submitting urbs for this any more */
 319
 320         if (!ed)
 321                 return;
 322
 323 rescan:
 324         spin_lock_irqsave (&ohci->lock, flags);
 325
 326         if (!HC_IS_RUNNING (hcd->state)) {
 327 sanitize:
 328                 ed->state = ED_IDLE;
 329                 if (quirk_zfmicro(ohci) && ed->type == PIPE_INTERRUPT)
 330                         ohci->eds_scheduled--;
 331                 finish_unlinks (ohci, 0);
 332         }
 333
 334         switch (ed->state) {
 335         case ED_UNLINK:         /* wait for hw to finish? */
 336                 /* major IRQ delivery trouble loses INTR_SF too... */
 337                 if (limit-- == 0) {
 338                         ohci_warn(ohci, "ED unlink timeout\n");
 339                         if (quirk_zfmicro(ohci)) {
 340                                 ohci_warn(ohci, "Attempting ZF TD recovery\n");
 341                                 ohci->ed_to_check = ed;
 342                                 ohci->zf_delay = 2;
 343                         }
 344                         goto sanitize;
 345                 }
 346                 spin_unlock_irqrestore (&ohci->lock, flags);
 347                 schedule_timeout_uninterruptible(1);
 348                 goto rescan;
 349         case ED_IDLE:           /* fully unlinked */
 350                 if (list_empty (&ed->td_list)) {
 351                         td_free (ohci, ed->dummy);
 352                         ed_free (ohci, ed);
 353                         break;
 354                 }
 355                 /* else FALL THROUGH */
 356         default:
 357                 /* caller was supposed to have unlinked any requests;
 358                  * that's not our job.  can't recover; must leak ed.
 359                  */
 360                 ohci_err (ohci, "leak ed %p (#%02x) state %d%s\n",
 361                         ed, ep->desc.bEndpointAddress, ed->state,
 362                         list_empty (&ed->td_list) ? "" : " (has tds)");
 363                 td_free (ohci, ed->dummy);
 364                 break;
 365         }
 366         ep->hcpriv = NULL;
 367         spin_unlock_irqrestore (&ohci->lock, flags);
 368         return;
 369 }
 370
 371 static int ohci_get_frame (struct usb_hcd *hcd)
 372 {
 373         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
 374
 375         return ohci_frame_no(ohci);
 376 }
 377
 378 static void ohci_usb_reset (struct ohci_hcd *ohci)
 379 {
 380         ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
 381         ohci->hc_control &= OHCI_CTRL_RWC;
 382         ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
 383 }
 384
 385 /* ohci_shutdown forcibly disables IRQs and DMA, helping kexec and
 386  * other cases where the next software may expect clean state from the
 387  * "firmware".  this is bus-neutral, unlike shutdown() methods.
 388  */
 389 static void
 390 ohci_shutdown (struct usb_hcd *hcd)
 391 {
 392         struct ohci_hcd *ohci;
 393
 394         ohci = hcd_to_ohci (hcd);
 395         ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
 396         ohci_usb_reset (ohci);
 397         /* flush the writes */
 398         (void) ohci_readl (ohci, &ohci->regs->control);
 399 }
 400
 401 static int check_ed(struct ohci_hcd *ohci, struct ed *ed)
 402 {
 403         return (hc32_to_cpu(ohci, ed->hwINFO) & ED_IN) != 0
 404                 && (hc32_to_cpu(ohci, ed->hwHeadP) & TD_MASK)
 405                         == (hc32_to_cpu(ohci, ed->hwTailP) & TD_MASK)
 406                 && !list_empty(&ed->td_list);
 407 }
 408
 409 /* ZF Micro watchdog timer callback. The ZF Micro chipset sometimes completes
 410  * an interrupt TD but neglects to add it to the donelist.  On systems with
 411  * this chipset, we need to periodically check the state of the queues to look
 412  * for such "lost" TDs.
 413  */
 414 static void unlink_watchdog_func(unsigned long _ohci)
 415 {
 416         unsigned long   flags;
 417         unsigned        max;
 418         unsigned        seen_count = 0;
 419         unsigned        i;
 420         struct ed       **seen = NULL;
 421         struct ohci_hcd *ohci = (struct ohci_hcd *) _ohci;
 422
 423         spin_lock_irqsave(&ohci->lock, flags);
 424         max = ohci->eds_scheduled;
 425         if (!max)
 426                 goto done;
 427
 428         if (ohci->ed_to_check)
 429                 goto out;
 430
 431         seen = kcalloc(max, sizeof *seen, GFP_ATOMIC);
 432         if (!seen)
 433                 goto out;
 434
 435         for (i = 0; i < NUM_INTS; i++) {
 436                 struct ed       *ed = ohci->periodic[i];
 437
 438                 while (ed) {
 439                         unsigned        temp;
 440
 441                         /* scan this branch of the periodic schedule tree */
 442                         for (temp = 0; temp < seen_count; temp++) {
 443                                 if (seen[temp] == ed) {
 444                                         /* we've checked it and what's after */
 445                                         ed = NULL;
 446                                         break;
 447                                 }
 448                         }
 449                         if (!ed)
 450                                 break;
 451                         seen[seen_count++] = ed;
 452                         if (!check_ed(ohci, ed)) {
 453                                 ed = ed->ed_next;
 454                                 continue;
 455                         }
 456
 457                         /* HC's TD list is empty, but HCD sees at least one
 458                          * TD that's not been sent through the donelist.
 459                          */
 460                         ohci->ed_to_check = ed;
 461                         ohci->zf_delay = 2;
 462
 463                         /* The HC may wait until the next frame to report the
 464                          * TD as done through the donelist and INTR_WDH.  (We
 465                          * just *assume* it's not a multi-TD interrupt URB;
 466                          * those could defer the IRQ more than one frame, using
 467                          * DI...)  Check again after the next INTR_SF.
 468                          */
 469                         ohci_writel(ohci, OHCI_INTR_SF,
 470                                         &ohci->regs->intrstatus);
 471                         ohci_writel(ohci, OHCI_INTR_SF,
 472                                         &ohci->regs->intrenable);
 473
 474                         /* flush those writes */
 475                         (void) ohci_readl(ohci, &ohci->regs->control);
 476
 477                         goto out;
 478                 }
 479         }
 480 out:
 481         kfree(seen);
 482         if (ohci->eds_scheduled)
 483                 mod_timer(&ohci->unlink_watchdog, round_jiffies(jiffies + HZ));
 484 done:
 485         spin_unlock_irqrestore(&ohci->lock, flags);
 486 }
 487
 488 /*-------------------------------------------------------------------------*
 489  * HC functions
 490  *-------------------------------------------------------------------------*/
 491
 492 /* init memory, and kick BIOS/SMM off */
 493
 494 static int ohci_init (struct ohci_hcd *ohci)
 495 {
 496         int ret;
 497         struct usb_hcd *hcd = ohci_to_hcd(ohci);
 498
 499         if (distrust_firmware)
 500                 ohci->flags |= OHCI_QUIRK_HUB_POWER;
 501
 502         disable (ohci);
 503         ohci->regs = hcd->regs;
 504
 505         /* REVISIT this BIOS handshake is now moved into PCI "quirks", and
 506          * was never needed for most non-PCI systems ... remove the code?
 507          */
 508
 509 #ifndef IR_DISABLE
 510         /* SMM owns the HC?  not for long! */
 511         if (!no_handshake && ohci_readl (ohci,
 512                                         &ohci->regs->control) & OHCI_CTRL_IR) {
 513                 u32 temp;
 514
 515                 ohci_dbg (ohci, "USB HC TakeOver from BIOS/SMM\n");
 516
 517                 /* this timeout is arbitrary.  we make it long, so systems
 518                  * depending on usb keyboards may be usable even if the
 519                  * BIOS/SMM code seems pretty broken.
 520                  */
 521                 temp = 500;     /* arbitrary: five seconds */
 522
 523                 ohci_writel (ohci, OHCI_INTR_OC, &ohci->regs->intrenable);
 524                 ohci_writel (ohci, OHCI_OCR, &ohci->regs->cmdstatus);
 525                 while (ohci_readl (ohci, &ohci->regs->control) & OHCI_CTRL_IR) {
 526                         msleep (10);
 527                         if (--temp == 0) {
 528                                 ohci_err (ohci, "USB HC takeover failed!"
 529                                         "  (BIOS/SMM bug)\n");
 530                                 return -EBUSY;
 531                         }
 532                 }
 533                 ohci_usb_reset (ohci);
 534         }
 535 #endif
 536
 537         /* Disable HC interrupts */
 538         ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
 539
 540         /* flush the writes, and save key bits like RWC */
 541         if (ohci_readl (ohci, &ohci->regs->control) & OHCI_CTRL_RWC)
 542                 ohci->hc_control |= OHCI_CTRL_RWC;
 543
 544         /* Read the number of ports unless overridden */
 545         if (ohci->num_ports == 0)
 546                 ohci->num_ports = roothub_a(ohci) & RH_A_NDP;
 547
 548         if (ohci->hcca)
 549                 return 0;
 550
 551         ohci->hcca = dma_alloc_coherent (hcd->self.controller,
 552                         sizeof *ohci->hcca, &ohci->hcca_dma, 0);
 553         if (!ohci->hcca)
 554                 return -ENOMEM;
 555
 556         if ((ret = ohci_mem_init (ohci)) < 0)
 557                 ohci_stop (hcd);
 558         else {
 559                 create_debug_files (ohci);
 560         }
 561
 562         return ret;
 563 }
 564
 565 /*-------------------------------------------------------------------------*/
 566
 567 /* Start an OHCI controller, set the BUS operational
 568  * resets USB and controller
 569  * enable interrupts
 570  */
 571 static int ohci_run (struct ohci_hcd *ohci)
 572 {
 573         u32                     mask, val;
 574         int                     first = ohci->fminterval == 0;
 575         struct usb_hcd          *hcd = ohci_to_hcd(ohci);
 576
 577         disable (ohci);
 578
 579         /* boot firmware should have set this up (5.1.1.3.1) */
 580         if (first) {
 581
 582                 val = ohci_readl (ohci, &ohci->regs->fminterval);
 583                 ohci->fminterval = val & 0x3fff;
 584                 if (ohci->fminterval != FI)
 585                         ohci_dbg (ohci, "fminterval delta %d\n",
 586                                 ohci->fminterval - FI);
 587                 ohci->fminterval |= FSMP (ohci->fminterval) << 16;
 588                 /* also: power/overcurrent flags in roothub.a */
 589         }
 590
 591         /* Reset USB nearly "by the book".  RemoteWakeupConnected has
 592          * to be checked in case boot firmware (BIOS/SMM/...) has set up
 593          * wakeup in a way the bus isn't aware of (e.g., legacy PCI PM).
 594          * If the bus glue detected wakeup capability then it should
 595          * already be enabled; if so we'll just enable it again.
 596          */
 597         if ((ohci->hc_control & OHCI_CTRL_RWC) != 0)
 598                 device_set_wakeup_capable(hcd->self.controller, 1);
 599
 600         switch (ohci->hc_control & OHCI_CTRL_HCFS) {
 601         case OHCI_USB_OPER:
 602                 val = 0;
 603                 break;
 604         case OHCI_USB_SUSPEND:
 605         case OHCI_USB_RESUME:
 606                 ohci->hc_control &= OHCI_CTRL_RWC;
 607                 ohci->hc_control |= OHCI_USB_RESUME;
 608                 val = 10 /* msec wait */;
 609                 break;
 610         // case OHCI_USB_RESET:
 611         default:
 612                 ohci->hc_control &= OHCI_CTRL_RWC;
 613                 ohci->hc_control |= OHCI_USB_RESET;
 614                 val = 50 /* msec wait */;
 615                 break;
 616         }
 617         ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
 618         // flush the writes
 619         (void) ohci_readl (ohci, &ohci->regs->control);
 620         msleep(val);
 621
 622         memset (ohci->hcca, 0, sizeof (struct ohci_hcca));
 623
 624         /* 2msec timelimit here means no irqs/preempt */
 625         spin_lock_irq (&ohci->lock);
 626
 627 retry:
 628         /* HC Reset requires max 10 us delay */
 629         ohci_writel (ohci, OHCI_HCR,  &ohci->regs->cmdstatus);
 630         val = 30;       /* ... allow extra time */
 631         while ((ohci_readl (ohci, &ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
 632                 if (--val == 0) {
 633                         spin_unlock_irq (&ohci->lock);
 634                         ohci_err (ohci, "USB HC reset timed out!\n");
 635                         return -1;
 636                 }
 637                 udelay (1);
 638         }
 639
 640         /* now we're in the SUSPEND state ... must go OPERATIONAL
 641          * within 2msec else HC enters RESUME
 642          *
 643          * ... but some hardware won't init fmInterval "by the book"
 644          * (SiS, OPTi ...), so reset again instead.  SiS doesn't need
 645          * this if we write fmInterval after we're OPERATIONAL.
 646          * Unclear about ALi, ServerWorks, and others ... this could
 647          * easily be a longstanding bug in chip init on Linux.
 648          */
 649         if (ohci->flags & OHCI_QUIRK_INITRESET) {
 650                 ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
 651                 // flush those writes
 652                 (void) ohci_readl (ohci, &ohci->regs->control);
 653         }
 654
 655         /* Tell the controller where the control and bulk lists are
 656          * The lists are empty now. */
 657         ohci_writel (ohci, 0, &ohci->regs->ed_controlhead);
 658         ohci_writel (ohci, 0, &ohci->regs->ed_bulkhead);
 659
 660         /* a reset clears this */
 661         ohci_writel (ohci, (u32) ohci->hcca_dma, &ohci->regs->hcca);
 662
 663         periodic_reinit (ohci);
 664
 665         /* some OHCI implementations are finicky about how they init.
 666          * bogus values here mean not even enumeration could work.
 667          */
 668         if ((ohci_readl (ohci, &ohci->regs->fminterval) & 0x3fff0000) == 0
 669                         || !ohci_readl (ohci, &ohci->regs->periodicstart)) {
 670                 if (!(ohci->flags & OHCI_QUIRK_INITRESET)) {
 671                         ohci->flags |= OHCI_QUIRK_INITRESET;
 672                         ohci_dbg (ohci, "enabling initreset quirk\n");
 673                         goto retry;
 674                 }
 675                 spin_unlock_irq (&ohci->lock);
 676                 ohci_err (ohci, "init err (%08x %04x)\n",
 677                         ohci_readl (ohci, &ohci->regs->fminterval),
 678                         ohci_readl (ohci, &ohci->regs->periodicstart));
 679                 return -EOVERFLOW;
 680         }
 681
 682         /* use rhsc irqs after khubd is fully initialized */
 683         hcd->poll_rh = 1;
 684         hcd->uses_new_polling = 1;
 685
 686         /* start controller operations */
 687         ohci->hc_control &= OHCI_CTRL_RWC;
 688         ohci->hc_control |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
 689         ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
 690         hcd->state = HC_STATE_RUNNING;
 691
 692         /* wake on ConnectStatusChange, matching external hubs */
 693         ohci_writel (ohci, RH_HS_DRWE, &ohci->regs->roothub.status);
 694
 695         /* Choose the interrupts we care about now, others later on demand */
 696         mask = OHCI_INTR_INIT;
 697         ohci_writel (ohci, ~0, &ohci->regs->intrstatus);
 698         ohci_writel (ohci, mask, &ohci->regs->intrenable);
 699
 700         /* handle root hub init quirks ... */
 701         val = roothub_a (ohci);
 702         val &= ~(RH_A_PSM | RH_A_OCPM);
 703         if (ohci->flags & OHCI_QUIRK_SUPERIO) {
 704                 /* NSC 87560 and maybe others */
 705                 val |= RH_A_NOCP;
 706                 val &= ~(RH_A_POTPGT | RH_A_NPS);
 707                 ohci_writel (ohci, val, &ohci->regs->roothub.a);
 708         } else if ((ohci->flags & OHCI_QUIRK_AMD756) ||
 709                         (ohci->flags & OHCI_QUIRK_HUB_POWER)) {
 710                 /* hub power always on; required for AMD-756 and some
 711                  * Mac platforms.  ganged overcurrent reporting, if any.
 712                  */
 713                 val |= RH_A_NPS;
 714                 ohci_writel (ohci, val, &ohci->regs->roothub.a);
 715         }
 716         ohci_writel (ohci, RH_HS_LPSC, &ohci->regs->roothub.status);
 717         ohci_writel (ohci, (val & RH_A_NPS) ? 0 : RH_B_PPCM,
 718                                                 &ohci->regs->roothub.b);
 719         // flush those writes
 720         (void) ohci_readl (ohci, &ohci->regs->control);
 721
 722         ohci->next_statechange = jiffies + STATECHANGE_DELAY;
 723         spin_unlock_irq (&ohci->lock);
 724
 725         // POTPGT delay is bits 24-31, in 2 ms units.
 726         mdelay ((val >> 23) & 0x1fe);
 727         hcd->state = HC_STATE_RUNNING;
 728
 729         if (quirk_zfmicro(ohci)) {
 730                 /* Create timer to watch for bad queue state on ZF Micro */
 731                 setup_timer(&ohci->unlink_watchdog, unlink_watchdog_func,
 732                                 (unsigned long) ohci);
 733
 734                 ohci->eds_scheduled = 0;
 735                 ohci->ed_to_check = NULL;
 736         }
 737
 738         ohci_dump (ohci, 1);
 739
 740         return 0;
 741 }
 742
 743 /*-------------------------------------------------------------------------*/
 744
 745 /* an interrupt happens */
 746
 747 static irqreturn_t ohci_irq (struct usb_hcd *hcd)
 748 {
 749         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
 750         struct ohci_regs __iomem *regs = ohci->regs;
 751         int                     ints;
 752
 753         /* Read interrupt status (and flush pending writes).  We ignore the
 754          * optimization of checking the LSB of hcca->done_head; it doesn't
 755          * work on all systems (edge triggering for OHCI can be a factor).
 756          */
 757         ints = ohci_readl(ohci, &regs->intrstatus);
 758
 759         /* Check for an all 1's result which is a typical consequence
 760          * of dead, unclocked, or unplugged (CardBus...) devices
 761          */
 762         if (ints == ~(u32)0) {
 763                 disable (ohci);
 764                 ohci_dbg (ohci, "device removed!\n");
 765                 return IRQ_HANDLED;
 766         }
 767
 768         /* We only care about interrupts that are enabled */
 769         ints &= ohci_readl(ohci, &regs->intrenable);
 770
 771         /* interrupt for some other device? */
 772         if (ints == 0)
 773                 return IRQ_NOTMINE;
 774
 775         if (ints & OHCI_INTR_UE) {
 776                 // e.g. due to PCI Master/Target Abort
 777                 if (quirk_nec(ohci)) {
 778                         /* Workaround for a silicon bug in some NEC chips used
 779                          * in Apple's PowerBooks. Adapted from Darwin code.
 780                          */
 781                         ohci_err (ohci, "OHCI Unrecoverable Error, scheduling NEC chip restart\n");
 782
 783                         ohci_writel (ohci, OHCI_INTR_UE, &regs->intrdisable);
 784
 785                         schedule_work (&ohci->nec_work);
 786                 } else {
 787                         disable (ohci);
 788                         ohci_err (ohci, "OHCI Unrecoverable Error, disabled\n");
 789                 }
 790
 791                 ohci_dump (ohci, 1);
 792                 ohci_usb_reset (ohci);
 793         }
 794
 795         if (ints & OHCI_INTR_RHSC) {
 796                 ohci_vdbg(ohci, "rhsc\n");
 797                 ohci->next_statechange = jiffies + STATECHANGE_DELAY;
 798                 ohci_writel(ohci, OHCI_INTR_RD | OHCI_INTR_RHSC,
 799                                 &regs->intrstatus);
 800
 801                 /* NOTE: Vendors didn't always make the same implementation
 802                  * choices for RHSC.  Many followed the spec; RHSC triggers
 803                  * on an edge, like setting and maybe clearing a port status
 804                  * change bit.  With others it's level-triggered, active
 805                  * until khubd clears all the port status change bits.  We'll
 806                  * always disable it here and rely on polling until khubd
 807                  * re-enables it.
 808                  */
 809                 ohci_writel(ohci, OHCI_INTR_RHSC, &regs->intrdisable);
 810                 usb_hcd_poll_rh_status(hcd);
 811         }
 812
 813         /* For connect and disconnect events, we expect the controller
 814          * to turn on RHSC along with RD.  But for remote wakeup events
 815          * this might not happen.
 816          */
 817         else if (ints & OHCI_INTR_RD) {
 818                 ohci_vdbg(ohci, "resume detect\n");
 819                 ohci_writel(ohci, OHCI_INTR_RD, &regs->intrstatus);
 820                 hcd->poll_rh = 1;
 821                 if (ohci->autostop) {
 822                         spin_lock (&ohci->lock);
 823                         ohci_rh_resume (ohci);
 824                         spin_unlock (&ohci->lock);
 825                 } else
 826                         usb_hcd_resume_root_hub(hcd);
 827         }
 828
 829         if (ints & OHCI_INTR_WDH) {
 830                 spin_lock (&ohci->lock);
 831                 dl_done_list (ohci);
 832                 spin_unlock (&ohci->lock);
 833         }
 834
 835         if (quirk_zfmicro(ohci) && (ints & OHCI_INTR_SF)) {
 836                 spin_lock(&ohci->lock);
 837                 if (ohci->ed_to_check) {
 838                         struct ed *ed = ohci->ed_to_check;
 839
 840                         if (check_ed(ohci, ed)) {
 841                                 /* HC thinks the TD list is empty; HCD knows
 842                                  * at least one TD is outstanding
 843                                  */
 844                                 if (--ohci->zf_delay == 0) {
 845                                         struct td *td = list_entry(
 846                                                 ed->td_list.next,
 847                                                 struct td, td_list);
 848                                         ohci_warn(ohci,
 849                                                   "Reclaiming orphan TD %p\n",
 850                                                   td);
 851                                         takeback_td(ohci, td);
 852                                         ohci->ed_to_check = NULL;
 853                                 }
 854                         } else
 855                                 ohci->ed_to_check = NULL;
 856                 }
 857                 spin_unlock(&ohci->lock);
 858         }
 859
 860         /* could track INTR_SO to reduce available PCI/... bandwidth */
 861
 862         /* handle any pending URB/ED unlinks, leaving INTR_SF enabled
 863          * when there's still unlinking to be done (next frame).
 864          */
 865         spin_lock (&ohci->lock);
 866         if (ohci->ed_rm_list)
 867                 finish_unlinks (ohci, ohci_frame_no(ohci));
 868         if ((ints & OHCI_INTR_SF) != 0
 869                         && !ohci->ed_rm_list
 870                         && !ohci->ed_to_check
 871                         && HC_IS_RUNNING(hcd->state))
 872                 ohci_writel (ohci, OHCI_INTR_SF, &regs->intrdisable);
 873         spin_unlock (&ohci->lock);
 874
 875         if (HC_IS_RUNNING(hcd->state)) {
 876                 ohci_writel (ohci, ints, &regs->intrstatus);
 877                 ohci_writel (ohci, OHCI_INTR_MIE, &regs->intrenable);
 878                 // flush those writes
 879                 (void) ohci_readl (ohci, &ohci->regs->control);
 880         }
 881
 882         return IRQ_HANDLED;
 883 }
 884
 885 /*-------------------------------------------------------------------------*/
 886
 887 static void ohci_stop (struct usb_hcd *hcd)
 888 {
 889         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
 890
 891         ohci_dump (ohci, 1);
 892
 893         flush_scheduled_work();
 894
 895         ohci_usb_reset (ohci);
 896         ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
 897         free_irq(hcd->irq, hcd);
 898         hcd->irq = -1;
 899
 900         if (quirk_zfmicro(ohci))
 901                 del_timer(&ohci->unlink_watchdog);
 902         if (quirk_amdiso(ohci))
 903                 amd_iso_dev_put();
 904
 905         remove_debug_files (ohci);
 906         ohci_mem_cleanup (ohci);
 907         if (ohci->hcca) {
 908                 dma_free_coherent (hcd->self.controller,
 909                                 sizeof *ohci->hcca,
 910                                 ohci->hcca, ohci->hcca_dma);
 911                 ohci->hcca = NULL;
 912                 ohci->hcca_dma = 0;
 913         }
 914 }
 915
 916 /*-------------------------------------------------------------------------*/
 917
 918 #if defined(CONFIG_PM) || defined(CONFIG_PCI)
 919
 920 /* must not be called from interrupt context */
 921 static int ohci_restart (struct ohci_hcd *ohci)
 922 {
 923         int temp;
 924         int i;
 925         struct urb_priv *priv;
 926
 927         spin_lock_irq(&ohci->lock);
 928         disable (ohci);
 929
 930         /* Recycle any "live" eds/tds (and urbs). */
 931         if (!list_empty (&ohci->pending))
 932                 ohci_dbg(ohci, "abort schedule...\n");
 933         list_for_each_entry (priv, &ohci->pending, pending) {
 934                 struct urb      *urb = priv->td[0]->urb;
 935                 struct ed       *ed = priv->ed;
 936
 937                 switch (ed->state) {
 938                 case ED_OPER:
 939                         ed->state = ED_UNLINK;
 940                         ed->hwINFO |= cpu_to_hc32(ohci, ED_DEQUEUE);
 941                         ed_deschedule (ohci, ed);
 942
 943                         ed->ed_next = ohci->ed_rm_list;
 944                         ed->ed_prev = NULL;
 945                         ohci->ed_rm_list = ed;
 946                         /* FALLTHROUGH */
 947                 case ED_UNLINK:
 948                         break;
 949                 default:
 950                         ohci_dbg(ohci, "bogus ed %p state %d\n",
 951                                         ed, ed->state);
 952                 }
 953
 954                 if (!urb->unlinked)
 955                         urb->unlinked = -ESHUTDOWN;
 956         }
 957         finish_unlinks (ohci, 0);
 958         spin_unlock_irq(&ohci->lock);
 959
 960         /* paranoia, in case that didn't work: */
 961
 962         /* empty the interrupt branches */
 963         for (i = 0; i < NUM_INTS; i++) ohci->load [i] = 0;
 964         for (i = 0; i < NUM_INTS; i++) ohci->hcca->int_table [i] = 0;
 965
 966         /* no EDs to remove */
 967         ohci->ed_rm_list = NULL;
 968
 969         /* empty control and bulk lists */
 970         ohci->ed_controltail = NULL;
 971         ohci->ed_bulktail    = NULL;
 972
 973         if ((temp = ohci_run (ohci)) < 0) {
 974                 ohci_err (ohci, "can't restart, %d\n", temp);
 975                 return temp;
 976         }
 977         ohci_dbg(ohci, "restart complete\n");
 978         return 0;
 979 }
 980
 981 #endif
 982
 983 /*-------------------------------------------------------------------------*/
 984
 985 MODULE_AUTHOR (DRIVER_AUTHOR);
 986 MODULE_DESCRIPTION(DRIVER_DESC);
 987 MODULE_LICENSE ("GPL");
 988
 989 #ifdef CONFIG_PCI
 990 #include "ohci-pci.c"
 991 #define PCI_DRIVER              ohci_pci_driver
 992 #endif
 993
 994 #if defined(CONFIG_ARCH_SA1100) && defined(CONFIG_SA1111)
 995 #include "ohci-sa1111.c"
 996 #define SA1111_DRIVER           ohci_hcd_sa1111_driver
 997 #endif
 998
 999 #if defined(CONFIG_ARCH_S3C2410) || defined(CONFIG_ARCH_S3C64XX)
1000 #include "ohci-s3c2410.c"
1001 #define PLATFORM_DRIVER         ohci_hcd_s3c2410_driver
1002 #endif
1003
1004 #ifdef CONFIG_ARCH_OMAP
1005 #include "ohci-omap.c"
1006 #define PLATFORM_DRIVER         ohci_hcd_omap_driver
1007 #endif
1008
1009 #ifdef CONFIG_ARCH_LH7A404
1010 #include "ohci-lh7a404.c"
1011 #define PLATFORM_DRIVER         ohci_hcd_lh7a404_driver
1012 #endif
1013
1014 #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
1015 #include "ohci-pxa27x.c"
1016 #define PLATFORM_DRIVER         ohci_hcd_pxa27x_driver
1017 #endif
1018
1019 #ifdef CONFIG_ARCH_EP93XX
1020 #include "ohci-ep93xx.c"
1021 #define PLATFORM_DRIVER         ohci_hcd_ep93xx_driver
1022 #endif
1023
1024 #ifdef CONFIG_SOC_AU1X00
1025 #include "ohci-au1xxx.c"
1026 #define PLATFORM_DRIVER         ohci_hcd_au1xxx_driver
1027 #endif
1028
1029 #ifdef CONFIG_PNX8550
1030 #include "ohci-pnx8550.c"
1031 #define PLATFORM_DRIVER         ohci_hcd_pnx8550_driver
1032 #endif
1033
1034 #ifdef CONFIG_USB_OHCI_HCD_PPC_SOC
1035 #include "ohci-ppc-soc.c"
1036 #define PLATFORM_DRIVER         ohci_hcd_ppc_soc_driver
1037 #endif
1038
1039 #ifdef CONFIG_ARCH_AT91
1040 #include "ohci-at91.c"
1041 #define PLATFORM_DRIVER         ohci_hcd_at91_driver
1042 #endif
1043
1044 #ifdef CONFIG_ARCH_PNX4008
1045 #include "ohci-pnx4008.c"
1046 #define PLATFORM_DRIVER         usb_hcd_pnx4008_driver
1047 #endif
1048
1049 #if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
1050     defined(CONFIG_CPU_SUBTYPE_SH7721) || \
1051     defined(CONFIG_CPU_SUBTYPE_SH7763) || \
1052     defined(CONFIG_CPU_SUBTYPE_SH7786)
1053 #include "ohci-sh.c"
1054 #define PLATFORM_DRIVER         ohci_hcd_sh_driver
1055 #endif
1056
1057
1058 #ifdef CONFIG_USB_OHCI_HCD_PPC_OF
1059 #include "ohci-ppc-of.c"
1060 #define OF_PLATFORM_DRIVER      ohci_hcd_ppc_of_driver
1061 #endif
1062
1063 #ifdef CONFIG_PPC_PS3
1064 #include "ohci-ps3.c"
1065 #define PS3_SYSTEM_BUS_DRIVER   ps3_ohci_driver
1066 #endif
1067
1068 #ifdef CONFIG_USB_OHCI_HCD_SSB
1069 #include "ohci-ssb.c"
1070 #define SSB_OHCI_DRIVER         ssb_ohci_driver
1071 #endif
1072
1073 #ifdef CONFIG_MFD_SM501
1074 #include "ohci-sm501.c"
1075 #define SM501_OHCI_DRIVER       ohci_hcd_sm501_driver
1076 #endif
1077
1078 #ifdef CONFIG_MFD_TC6393XB
1079 #include "ohci-tmio.c"
1080 #define TMIO_OHCI_DRIVER        ohci_hcd_tmio_driver
1081 #endif
1082
1083 #if     !defined(PCI_DRIVER) &&         \
1084         !defined(PLATFORM_DRIVER) &&    \
1085         !defined(OF_PLATFORM_DRIVER) && \
1086         !defined(SA1111_DRIVER) &&      \
1087         !defined(PS3_SYSTEM_BUS_DRIVER) && \
1088         !defined(SM501_OHCI_DRIVER) && \
1089         !defined(TMIO_OHCI_DRIVER) && \
1090         !defined(SSB_OHCI_DRIVER)
1091 #error "missing bus glue for ohci-hcd"
1092 #endif
1093
1094 static int __init ohci_hcd_mod_init(void)
1095 {
1096         int retval = 0;
1097
1098         if (usb_disabled())
1099                 return -ENODEV;
1100
1101         printk(KERN_INFO "%s: " DRIVER_DESC "\n", hcd_name);
1102         pr_debug ("%s: block sizes: ed %Zd td %Zd\n", hcd_name,
1103                 sizeof (struct ed), sizeof (struct td));
1104         set_bit(USB_OHCI_LOADED, &usb_hcds_loaded);
1105
1106 #ifdef DEBUG
1107         ohci_debug_root = debugfs_create_dir("ohci", usb_debug_root);
1108         if (!ohci_debug_root) {
1109                 retval = -ENOENT;
1110                 goto error_debug;
1111         }
1112 #endif
1113
1114 #ifdef PS3_SYSTEM_BUS_DRIVER
1115         retval = ps3_ohci_driver_register(&PS3_SYSTEM_BUS_DRIVER);
1116         if (retval < 0)
1117                 goto error_ps3;
1118 #endif
1119
1120 #ifdef PLATFORM_DRIVER
1121         retval = platform_driver_register(&PLATFORM_DRIVER);
1122         if (retval < 0)
1123                 goto error_platform;
1124 #endif
1125
1126 #ifdef OF_PLATFORM_DRIVER
1127         retval = of_register_platform_driver(&OF_PLATFORM_DRIVER);
1128         if (retval < 0)
1129                 goto error_of_platform;
1130 #endif
1131
1132 #ifdef SA1111_DRIVER
1133         retval = sa1111_driver_register(&SA1111_DRIVER);
1134         if (retval < 0)
1135                 goto error_sa1111;
1136 #endif
1137
1138 #ifdef PCI_DRIVER
1139         retval = pci_register_driver(&PCI_DRIVER);
1140         if (retval < 0)
1141                 goto error_pci;
1142 #endif
1143
1144 #ifdef SSB_OHCI_DRIVER
1145         retval = ssb_driver_register(&SSB_OHCI_DRIVER);
1146         if (retval)
1147                 goto error_ssb;
1148 #endif
1149
1150 #ifdef SM501_OHCI_DRIVER
1151         retval = platform_driver_register(&SM501_OHCI_DRIVER);
1152         if (retval < 0)
1153                 goto error_sm501;
1154 #endif
1155
1156 #ifdef TMIO_OHCI_DRIVER
1157         retval = platform_driver_register(&TMIO_OHCI_DRIVER);
1158         if (retval < 0)
1159                 goto error_tmio;
1160 #endif
1161
1162         return retval;
1163
1164         /* Error path */
1165 #ifdef TMIO_OHCI_DRIVER
1166         platform_driver_unregister(&TMIO_OHCI_DRIVER);
1167  error_tmio:
1168 #endif
1169 #ifdef SM501_OHCI_DRIVER
1170         platform_driver_unregister(&SM501_OHCI_DRIVER);
1171  error_sm501:
1172 #endif
1173 #ifdef SSB_OHCI_DRIVER
1174         ssb_driver_unregister(&SSB_OHCI_DRIVER);
1175  error_ssb:
1176 #endif
1177 #ifdef PCI_DRIVER
1178         pci_unregister_driver(&PCI_DRIVER);
1179  error_pci:
1180 #endif
1181 #ifdef SA1111_DRIVER
1182         sa1111_driver_unregister(&SA1111_DRIVER);
1183  error_sa1111:
1184 #endif
1185 #ifdef OF_PLATFORM_DRIVER
1186         of_unregister_platform_driver(&OF_PLATFORM_DRIVER);
1187  error_of_platform:
1188 #endif
1189 #ifdef PLATFORM_DRIVER
1190         platform_driver_unregister(&PLATFORM_DRIVER);
1191  error_platform:
1192 #endif
1193 #ifdef PS3_SYSTEM_BUS_DRIVER
1194         ps3_ohci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
1195  error_ps3:
1196 #endif
1197 #ifdef DEBUG
1198         debugfs_remove(ohci_debug_root);
1199         ohci_debug_root = NULL;
1200  error_debug:
1201 #endif
1202
1203         clear_bit(USB_OHCI_LOADED, &usb_hcds_loaded);
1204         return retval;
1205 }
1206 module_init(ohci_hcd_mod_init);
1207
1208 static void __exit ohci_hcd_mod_exit(void)
1209 {
1210 #ifdef TMIO_OHCI_DRIVER
1211         platform_driver_unregister(&TMIO_OHCI_DRIVER);
1212 #endif
1213 #ifdef SM501_OHCI_DRIVER
1214         platform_driver_unregister(&SM501_OHCI_DRIVER);
1215 #endif
1216 #ifdef SSB_OHCI_DRIVER
1217         ssb_driver_unregister(&SSB_OHCI_DRIVER);
1218 #endif
1219 #ifdef PCI_DRIVER
1220         pci_unregister_driver(&PCI_DRIVER);
1221 #endif
1222 #ifdef SA1111_DRIVER
1223         sa1111_driver_unregister(&SA1111_DRIVER);
1224 #endif
1225 #ifdef OF_PLATFORM_DRIVER
1226         of_unregister_platform_driver(&OF_PLATFORM_DRIVER);
1227 #endif
1228 #ifdef PLATFORM_DRIVER
1229         platform_driver_unregister(&PLATFORM_DRIVER);
1230 #endif
1231 #ifdef PS3_SYSTEM_BUS_DRIVER
1232         ps3_ohci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
1233 #endif
1234 #ifdef DEBUG
1235         debugfs_remove(ohci_debug_root);
1236 #endif
1237         clear_bit(USB_OHCI_LOADED, &usb_hcds_loaded);
1238 }
1239 module_exit(ohci_hcd_mod_exit);
1240