?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
PM: OMAP3: Removed a couple of unused variables from DVFS code
[linux-ginger.git] / drivers / usb / serial / cp210x.c
blob698252a4dc5d9b59878a26b64a9a5caf00c8efef
1 /*
2 * Silicon Laboratories CP210x USB to RS232 serial adaptor driver
3 *
4 * Copyright (C) 2005 Craig Shelley (craig@microtron.org.uk)
5 *
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License version
8 * 2 as published by the Free Software Foundation.
9 *
10 * Support to set flow control line levels using TIOCMGET and TIOCMSET
11 * thanks to Karl Hiramoto karl@hiramoto.org. RTSCTS hardware flow
12 * control thanks to Munir Nassar nassarmu@real-time.com
13 *
14 */
15
16 #include <linux/kernel.h>
17 #include <linux/errno.h>
18 #include <linux/slab.h>
19 #include <linux/tty.h>
20 #include <linux/tty_flip.h>
21 #include <linux/module.h>
22 #include <linux/moduleparam.h>
23 #include <linux/usb.h>
24 #include <linux/uaccess.h>
25 #include <linux/usb/serial.h>
26
27 /*
28 * Version Information
29 */
30 #define DRIVER_VERSION "v0.09"
31 #define DRIVER_DESC "Silicon Labs CP210x RS232 serial adaptor driver"
32
33 /*
34 * Function Prototypes
35 */
36 static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *);
37 static void cp210x_cleanup(struct usb_serial_port *);
38 static void cp210x_close(struct usb_serial_port *);
39 static void cp210x_get_termios(struct tty_struct *,
40 struct usb_serial_port *port);
41 static void cp210x_get_termios_port(struct usb_serial_port *port,
42 unsigned int *cflagp, unsigned int *baudp);
43 static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *,
44 struct ktermios*);
45 static int cp210x_tiocmget(struct tty_struct *, struct file *);
46 static int cp210x_tiocmset(struct tty_struct *, struct file *,
47 unsigned int, unsigned int);
48 static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *,
49 unsigned int, unsigned int);
50 static void cp210x_break_ctl(struct tty_struct *, int);
51 static int cp210x_startup(struct usb_serial *);
52 static void cp210x_disconnect(struct usb_serial *);
53
54 static int debug;
55
56 static struct usb_device_id id_table [] = {
57 { USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */
58 { USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
59 { USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */
60 { USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
61 { USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
62 { USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
63 { USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */
64 { USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */
65 { USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
66 { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
67 { USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
68 { USB_DEVICE(0x10C4, 0x0F91) }, /* Vstabi */
69 { USB_DEVICE(0x10C4, 0x1101) }, /* Arkham Technology DS101 Bus Monitor */
70 { USB_DEVICE(0x10C4, 0x1601) }, /* Arkham Technology DS101 Adapter */
71 { USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */
72 { USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */
73 { USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */
74 { USB_DEVICE(0x10C4, 0x8054) }, /* Enfora GSM2228 */
75 { USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */
76 { USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */
77 { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
78 { USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */
79 { USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
80 { USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */
81 { USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
82 { USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
83 { USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
84 { USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
85 { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
86 { USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */
87 { USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */
88 { USB_DEVICE(0x10C4, 0x81AC) }, /* MSD Dash Hawk */
89 { USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
90 { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
91 { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
92 { USB_DEVICE(0x10C4, 0x81F2) }, /* C1007 HF band RFID controller */
93 { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
94 { USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
95 { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */
96 { USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
97 { USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
98 { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
99 { USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */
100 { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
101 { USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
102 { USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
103 { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
104 { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
105 { USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
106 { USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12 */
107 { USB_DEVICE(0x10C4, 0xF003) }, /* Elan Digital Systems USBpulse100 */
108 { USB_DEVICE(0x10C4, 0xF004) }, /* Elan Digital Systems USBcount50 */
109 { USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */
110 { USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */
111 { USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
112 { USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
113 { USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
114 { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
115 { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
116 { USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
117 { } /* Terminating Entry */
118 };
119
120 MODULE_DEVICE_TABLE(usb, id_table);
121
122 static struct usb_driver cp210x_driver = {
123 .name = "cp210x",
124 .probe = usb_serial_probe,
125 .disconnect = usb_serial_disconnect,
126 .id_table = id_table,
127 .no_dynamic_id = 1,
128 };
129
130 static struct usb_serial_driver cp210x_device = {
131 .driver = {
132 .owner = THIS_MODULE,
133 .name = "cp210x",
134 },
135 .usb_driver = &cp210x_driver,
136 .id_table = id_table,
137 .num_ports = 1,
138 .open = cp210x_open,
139 .close = cp210x_close,
140 .break_ctl = cp210x_break_ctl,
141 .set_termios = cp210x_set_termios,
142 .tiocmget = cp210x_tiocmget,
143 .tiocmset = cp210x_tiocmset,
144 .attach = cp210x_startup,
145 .disconnect = cp210x_disconnect,
146 };
147
148 /* Config request types */
149 #define REQTYPE_HOST_TO_DEVICE 0x41
150 #define REQTYPE_DEVICE_TO_HOST 0xc1
151
152 /* Config request codes */
153 #define CP210X_IFC_ENABLE 0x00
154 #define CP210X_SET_BAUDDIV 0x01
155 #define CP210X_GET_BAUDDIV 0x02
156 #define CP210X_SET_LINE_CTL 0x03
157 #define CP210X_GET_LINE_CTL 0x04
158 #define CP210X_SET_BREAK 0x05
159 #define CP210X_IMM_CHAR 0x06
160 #define CP210X_SET_MHS 0x07
161 #define CP210X_GET_MDMSTS 0x08
162 #define CP210X_SET_XON 0x09
163 #define CP210X_SET_XOFF 0x0A
164 #define CP210X_SET_EVENTMASK 0x0B
165 #define CP210X_GET_EVENTMASK 0x0C
166 #define CP210X_SET_CHAR 0x0D
167 #define CP210X_GET_CHARS 0x0E
168 #define CP210X_GET_PROPS 0x0F
169 #define CP210X_GET_COMM_STATUS 0x10
170 #define CP210X_RESET 0x11
171 #define CP210X_PURGE 0x12
172 #define CP210X_SET_FLOW 0x13
173 #define CP210X_GET_FLOW 0x14
174 #define CP210X_EMBED_EVENTS 0x15
175 #define CP210X_GET_EVENTSTATE 0x16
176 #define CP210X_SET_CHARS 0x19
177
178 /* CP210X_IFC_ENABLE */
179 #define UART_ENABLE 0x0001
180 #define UART_DISABLE 0x0000
181
182 /* CP210X_(SET|GET)_BAUDDIV */
183 #define BAUD_RATE_GEN_FREQ 0x384000
184
185 /* CP210X_(SET|GET)_LINE_CTL */
186 #define BITS_DATA_MASK 0X0f00
187 #define BITS_DATA_5 0X0500
188 #define BITS_DATA_6 0X0600
189 #define BITS_DATA_7 0X0700
190 #define BITS_DATA_8 0X0800
191 #define BITS_DATA_9 0X0900
192
193 #define BITS_PARITY_MASK 0x00f0
194 #define BITS_PARITY_NONE 0x0000
195 #define BITS_PARITY_ODD 0x0010
196 #define BITS_PARITY_EVEN 0x0020
197 #define BITS_PARITY_MARK 0x0030
198 #define BITS_PARITY_SPACE 0x0040
199
200 #define BITS_STOP_MASK 0x000f
201 #define BITS_STOP_1 0x0000
202 #define BITS_STOP_1_5 0x0001
203 #define BITS_STOP_2 0x0002
204
205 /* CP210X_SET_BREAK */
206 #define BREAK_ON 0x0000
207 #define BREAK_OFF 0x0001
208
209 /* CP210X_(SET_MHS|GET_MDMSTS) */
210 #define CONTROL_DTR 0x0001
211 #define CONTROL_RTS 0x0002
212 #define CONTROL_CTS 0x0010
213 #define CONTROL_DSR 0x0020
214 #define CONTROL_RING 0x0040
215 #define CONTROL_DCD 0x0080
216 #define CONTROL_WRITE_DTR 0x0100
217 #define CONTROL_WRITE_RTS 0x0200
218
219 /*
220 * cp210x_get_config
221 * Reads from the CP210x configuration registers
222 * 'size' is specified in bytes.
223 * 'data' is a pointer to a pre-allocated array of integers large
224 * enough to hold 'size' bytes (with 4 bytes to each integer)
225 */
226 static int cp210x_get_config(struct usb_serial_port *port, u8 request,
227 unsigned int *data, int size)
228 {
229 struct usb_serial *serial = port->serial;
230 __le32 *buf;
231 int result, i, length;
232
233 /* Number of integers required to contain the array */
234 length = (((size - 1) | 3) + 1)/4;
235
236 buf = kcalloc(length, sizeof(__le32), GFP_KERNEL);
237 if (!buf) {
238 dev_err(&port->dev, "%s - out of memory.\n", __func__);
239 return -ENOMEM;
240 }
241
242 /* Issue the request, attempting to read 'size' bytes */
243 result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
244 request, REQTYPE_DEVICE_TO_HOST, 0x0000,
245 0, buf, size, 300);
246
247 /* Convert data into an array of integers */
248 for (i = 0; i < length; i++)
249 data[i] = le32_to_cpu(buf[i]);
250
251 kfree(buf);
252
253 if (result != size) {
254 dbg("%s - Unable to send config request, "
255 "request=0x%x size=%d result=%d\n",
256 __func__, request, size, result);
257 return -EPROTO;
258 }
259
260 return 0;
261 }
262
263 /*
264 * cp210x_set_config
265 * Writes to the CP210x configuration registers
266 * Values less than 16 bits wide are sent directly
267 * 'size' is specified in bytes.
268 */
269 static int cp210x_set_config(struct usb_serial_port *port, u8 request,
270 unsigned int *data, int size)
271 {
272 struct usb_serial *serial = port->serial;
273 __le32 *buf;
274 int result, i, length;
275
276 /* Number of integers required to contain the array */
277 length = (((size - 1) | 3) + 1)/4;
278
279 buf = kmalloc(length * sizeof(__le32), GFP_KERNEL);
280 if (!buf) {
281 dev_err(&port->dev, "%s - out of memory.\n",
282 __func__);
283 return -ENOMEM;
284 }
285
286 /* Array of integers into bytes */
287 for (i = 0; i < length; i++)
288 buf[i] = cpu_to_le32(data[i]);
289
290 if (size > 2) {
291 result = usb_control_msg(serial->dev,
292 usb_sndctrlpipe(serial->dev, 0),
293 request, REQTYPE_HOST_TO_DEVICE, 0x0000,
294 0, buf, size, 300);
295 } else {
296 result = usb_control_msg(serial->dev,
297 usb_sndctrlpipe(serial->dev, 0),
298 request, REQTYPE_HOST_TO_DEVICE, data[0],
299 0, NULL, 0, 300);
300 }
301
302 kfree(buf);
303
304 if ((size > 2 && result != size) || result < 0) {
305 dbg("%s - Unable to send request, "
306 "request=0x%x size=%d result=%d\n",
307 __func__, request, size, result);
308 return -EPROTO;
309 }
310
311 /* Single data value */
312 result = usb_control_msg(serial->dev,
313 usb_sndctrlpipe(serial->dev, 0),
314 request, REQTYPE_HOST_TO_DEVICE, data[0],
315 0, NULL, 0, 300);
316 return 0;
317 }
318
319 /*
320 * cp210x_set_config_single
321 * Convenience function for calling cp210x_set_config on single data values
322 * without requiring an integer pointer
323 */
324 static inline int cp210x_set_config_single(struct usb_serial_port *port,
325 u8 request, unsigned int data)
326 {
327 return cp210x_set_config(port, request, &data, 2);
328 }
329
330 /*
331 * cp210x_quantise_baudrate
332 * Quantises the baud rate as per AN205 Table 1
333 */
334 static unsigned int cp210x_quantise_baudrate(unsigned int baud) {
335 if (baud <= 56) baud = 0;
336 else if (baud <= 300) baud = 300;
337 else if (baud <= 600) baud = 600;
338 else if (baud <= 1200) baud = 1200;
339 else if (baud <= 1800) baud = 1800;
340 else if (baud <= 2400) baud = 2400;
341 else if (baud <= 4000) baud = 4000;
342 else if (baud <= 4803) baud = 4800;
343 else if (baud <= 7207) baud = 7200;
344 else if (baud <= 9612) baud = 9600;
345 else if (baud <= 14428) baud = 14400;
346 else if (baud <= 16062) baud = 16000;
347 else if (baud <= 19250) baud = 19200;
348 else if (baud <= 28912) baud = 28800;
349 else if (baud <= 38601) baud = 38400;
350 else if (baud <= 51558) baud = 51200;
351 else if (baud <= 56280) baud = 56000;
352 else if (baud <= 58053) baud = 57600;
353 else if (baud <= 64111) baud = 64000;
354 else if (baud <= 77608) baud = 76800;
355 else if (baud <= 117028) baud = 115200;
356 else if (baud <= 129347) baud = 128000;
357 else if (baud <= 156868) baud = 153600;
358 else if (baud <= 237832) baud = 230400;
359 else if (baud <= 254234) baud = 250000;
360 else if (baud <= 273066) baud = 256000;
361 else if (baud <= 491520) baud = 460800;
362 else if (baud <= 567138) baud = 500000;
363 else if (baud <= 670254) baud = 576000;
364 else if (baud <= 1053257) baud = 921600;
365 else if (baud <= 1474560) baud = 1228800;
366 else if (baud <= 2457600) baud = 1843200;
367 else baud = 3686400;
368 return baud;
369 }
370
371 static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
372 {
373 struct usb_serial *serial = port->serial;
374 int result;
375
376 dbg("%s - port %d", __func__, port->number);
377
378 if (cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_ENABLE)) {
379 dev_err(&port->dev, "%s - Unable to enable UART\n",
380 __func__);
381 return -EPROTO;
382 }
383
384 /* Start reading from the device */
385 usb_fill_bulk_urb(port->read_urb, serial->dev,
386 usb_rcvbulkpipe(serial->dev,
387 port->bulk_in_endpointAddress),
388 port->read_urb->transfer_buffer,
389 port->read_urb->transfer_buffer_length,
390 serial->type->read_bulk_callback,
391 port);
392 result = usb_submit_urb(port->read_urb, GFP_KERNEL);
393 if (result) {
394 dev_err(&port->dev, "%s - failed resubmitting read urb, "
395 "error %d\n", __func__, result);
396 return result;
397 }
398
399 /* Configure the termios structure */
400 cp210x_get_termios(tty, port);
401 return 0;
402 }
403
404 static void cp210x_cleanup(struct usb_serial_port *port)
405 {
406 struct usb_serial *serial = port->serial;
407
408 dbg("%s - port %d", __func__, port->number);
409
410 if (serial->dev) {
411 /* shutdown any bulk reads that might be going on */
412 if (serial->num_bulk_out)
413 usb_kill_urb(port->write_urb);
414 if (serial->num_bulk_in)
415 usb_kill_urb(port->read_urb);
416 }
417 }
418
419 static void cp210x_close(struct usb_serial_port *port)
420 {
421 dbg("%s - port %d", __func__, port->number);
422
423 /* shutdown our urbs */
424 dbg("%s - shutting down urbs", __func__);
425 usb_kill_urb(port->write_urb);
426 usb_kill_urb(port->read_urb);
427
428 mutex_lock(&port->serial->disc_mutex);
429 if (!port->serial->disconnected)
430 cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE);
431 mutex_unlock(&port->serial->disc_mutex);
432 }
433
434 /*
435 * cp210x_get_termios
436 * Reads the baud rate, data bits, parity, stop bits and flow control mode
437 * from the device, corrects any unsupported values, and configures the
438 * termios structure to reflect the state of the device
439 */
440 static void cp210x_get_termios(struct tty_struct *tty,
441 struct usb_serial_port *port)
442 {
443 unsigned int baud;
444
445 if (tty) {
446 cp210x_get_termios_port(tty->driver_data,
447 &tty->termios->c_cflag, &baud);
448 tty_encode_baud_rate(tty, baud, baud);
449 }
450
451 else {
452 unsigned int cflag;
453 cflag = 0;
454 cp210x_get_termios_port(port, &cflag, &baud);
455 }
456 }
457
458 /*
459 * cp210x_get_termios_port
460 * This is the heart of cp210x_get_termios which always uses a &usb_serial_port.
461 */
462 static void cp210x_get_termios_port(struct usb_serial_port *port,
463 unsigned int *cflagp, unsigned int *baudp)
464 {
465 unsigned int cflag, modem_ctl[4];
466 unsigned int baud;
467 unsigned int bits;
468
469 dbg("%s - port %d", __func__, port->number);
470
471 cp210x_get_config(port, CP210X_GET_BAUDDIV, &baud, 2);
472 /* Convert to baudrate */
473 if (baud)
474 baud = cp210x_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud);
475
476 dbg("%s - baud rate = %d", __func__, baud);
477 *baudp = baud;
478
479 cflag = *cflagp;
480
481 cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
482 cflag &= ~CSIZE;
483 switch (bits & BITS_DATA_MASK) {
484 case BITS_DATA_5:
485 dbg("%s - data bits = 5", __func__);
486 cflag |= CS5;
487 break;
488 case BITS_DATA_6:
489 dbg("%s - data bits = 6", __func__);
490 cflag |= CS6;
491 break;
492 case BITS_DATA_7:
493 dbg("%s - data bits = 7", __func__);
494 cflag |= CS7;
495 break;
496 case BITS_DATA_8:
497 dbg("%s - data bits = 8", __func__);
498 cflag |= CS8;
499 break;
500 case BITS_DATA_9:
501 dbg("%s - data bits = 9 (not supported, using 8 data bits)",
502 __func__);
503 cflag |= CS8;
504 bits &= ~BITS_DATA_MASK;
505 bits |= BITS_DATA_8;
506 cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
507 break;
508 default:
509 dbg("%s - Unknown number of data bits, using 8", __func__);
510 cflag |= CS8;
511 bits &= ~BITS_DATA_MASK;
512 bits |= BITS_DATA_8;
513 cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
514 break;
515 }
516
517 switch (bits & BITS_PARITY_MASK) {
518 case BITS_PARITY_NONE:
519 dbg("%s - parity = NONE", __func__);
520 cflag &= ~PARENB;
521 break;
522 case BITS_PARITY_ODD:
523 dbg("%s - parity = ODD", __func__);
524 cflag |= (PARENB|PARODD);
525 break;
526 case BITS_PARITY_EVEN:
527 dbg("%s - parity = EVEN", __func__);
528 cflag &= ~PARODD;
529 cflag |= PARENB;
530 break;
531 case BITS_PARITY_MARK:
532 dbg("%s - parity = MARK (not supported, disabling parity)",
533 __func__);
534 cflag &= ~PARENB;
535 bits &= ~BITS_PARITY_MASK;
536 cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
537 break;
538 case BITS_PARITY_SPACE:
539 dbg("%s - parity = SPACE (not supported, disabling parity)",
540 __func__);
541 cflag &= ~PARENB;
542 bits &= ~BITS_PARITY_MASK;
543 cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
544 break;
545 default:
546 dbg("%s - Unknown parity mode, disabling parity", __func__);
547 cflag &= ~PARENB;
548 bits &= ~BITS_PARITY_MASK;
549 cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
550 break;
551 }
552
553 cflag &= ~CSTOPB;
554 switch (bits & BITS_STOP_MASK) {
555 case BITS_STOP_1:
556 dbg("%s - stop bits = 1", __func__);
557 break;
558 case BITS_STOP_1_5:
559 dbg("%s - stop bits = 1.5 (not supported, using 1 stop bit)",
560 __func__);
561 bits &= ~BITS_STOP_MASK;
562 cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
563 break;
564 case BITS_STOP_2:
565 dbg("%s - stop bits = 2", __func__);
566 cflag |= CSTOPB;
567 break;
568 default:
569 dbg("%s - Unknown number of stop bits, using 1 stop bit",
570 __func__);
571 bits &= ~BITS_STOP_MASK;
572 cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
573 break;
574 }
575
576 cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16);
577 if (modem_ctl[0] & 0x0008) {
578 dbg("%s - flow control = CRTSCTS", __func__);
579 cflag |= CRTSCTS;
580 } else {
581 dbg("%s - flow control = NONE", __func__);
582 cflag &= ~CRTSCTS;
583 }
584
585 *cflagp = cflag;
586 }
587
588 static void cp210x_set_termios(struct tty_struct *tty,
589 struct usb_serial_port *port, struct ktermios *old_termios)
590 {
591 unsigned int cflag, old_cflag;
592 unsigned int baud = 0, bits;
593 unsigned int modem_ctl[4];
594
595 dbg("%s - port %d", __func__, port->number);
596
597 if (!tty)
598 return;
599
600 tty->termios->c_cflag &= ~CMSPAR;
601 cflag = tty->termios->c_cflag;
602 old_cflag = old_termios->c_cflag;
603 baud = cp210x_quantise_baudrate(tty_get_baud_rate(tty));
604
605 /* If the baud rate is to be updated*/
606 if (baud != tty_termios_baud_rate(old_termios) && baud != 0) {
607 dbg("%s - Setting baud rate to %d baud", __func__,
608 baud);
609 if (cp210x_set_config_single(port, CP210X_SET_BAUDDIV,
610 ((BAUD_RATE_GEN_FREQ + baud/2) / baud))) {
611 dbg("Baud rate requested not supported by device\n");
612 baud = tty_termios_baud_rate(old_termios);
613 }
614 }
615 /* Report back the resulting baud rate */
616 tty_encode_baud_rate(tty, baud, baud);
617
618 /* If the number of data bits is to be updated */
619 if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
620 cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
621 bits &= ~BITS_DATA_MASK;
622 switch (cflag & CSIZE) {
623 case CS5:
624 bits |= BITS_DATA_5;
625 dbg("%s - data bits = 5", __func__);
626 break;
627 case CS6:
628 bits |= BITS_DATA_6;
629 dbg("%s - data bits = 6", __func__);
630 break;
631 case CS7:
632 bits |= BITS_DATA_7;
633 dbg("%s - data bits = 7", __func__);
634 break;
635 case CS8:
636 bits |= BITS_DATA_8;
637 dbg("%s - data bits = 8", __func__);
638 break;
639 /*case CS9:
640 bits |= BITS_DATA_9;
641 dbg("%s - data bits = 9", __func__);
642 break;*/
643 default:
644 dbg("cp210x driver does not "
645 "support the number of bits requested,"
646 " using 8 bit mode\n");
647 bits |= BITS_DATA_8;
648 break;
649 }
650 if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
651 dbg("Number of data bits requested "
652 "not supported by device\n");
653 }
654
655 if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))) {
656 cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
657 bits &= ~BITS_PARITY_MASK;
658 if (cflag & PARENB) {
659 if (cflag & PARODD) {
660 bits |= BITS_PARITY_ODD;
661 dbg("%s - parity = ODD", __func__);
662 } else {
663 bits |= BITS_PARITY_EVEN;
664 dbg("%s - parity = EVEN", __func__);
665 }
666 }
667 if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
668 dbg("Parity mode not supported "
669 "by device\n");
670 }
671
672 if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
673 cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
674 bits &= ~BITS_STOP_MASK;
675 if (cflag & CSTOPB) {
676 bits |= BITS_STOP_2;
677 dbg("%s - stop bits = 2", __func__);
678 } else {
679 bits |= BITS_STOP_1;
680 dbg("%s - stop bits = 1", __func__);
681 }
682 if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
683 dbg("Number of stop bits requested "
684 "not supported by device\n");
685 }
686
687 if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
688 cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16);
689 dbg("%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x",
690 __func__, modem_ctl[0], modem_ctl[1],
691 modem_ctl[2], modem_ctl[3]);
692
693 if (cflag & CRTSCTS) {
694 modem_ctl[0] &= ~0x7B;
695 modem_ctl[0] |= 0x09;
696 modem_ctl[1] = 0x80;
697 dbg("%s - flow control = CRTSCTS", __func__);
698 } else {
699 modem_ctl[0] &= ~0x7B;
700 modem_ctl[0] |= 0x01;
701 modem_ctl[1] |= 0x40;
702 dbg("%s - flow control = NONE", __func__);
703 }
704
705 dbg("%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x",
706 __func__, modem_ctl[0], modem_ctl[1],
707 modem_ctl[2], modem_ctl[3]);
708 cp210x_set_config(port, CP210X_SET_FLOW, modem_ctl, 16);
709 }
710
711 }
712
713 static int cp210x_tiocmset (struct tty_struct *tty, struct file *file,
714 unsigned int set, unsigned int clear)
715 {
716 struct usb_serial_port *port = tty->driver_data;
717 return cp210x_tiocmset_port(port, file, set, clear);
718 }
719
720 static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *file,
721 unsigned int set, unsigned int clear)
722 {
723 unsigned int control = 0;
724
725 dbg("%s - port %d", __func__, port->number);
726
727 if (set & TIOCM_RTS) {
728 control |= CONTROL_RTS;
729 control |= CONTROL_WRITE_RTS;
730 }
731 if (set & TIOCM_DTR) {
732 control |= CONTROL_DTR;
733 control |= CONTROL_WRITE_DTR;
734 }
735 if (clear & TIOCM_RTS) {
736 control &= ~CONTROL_RTS;
737 control |= CONTROL_WRITE_RTS;
738 }
739 if (clear & TIOCM_DTR) {
740 control &= ~CONTROL_DTR;
741 control |= CONTROL_WRITE_DTR;
742 }
743
744 dbg("%s - control = 0x%.4x", __func__, control);
745
746 return cp210x_set_config(port, CP210X_SET_MHS, &control, 2);
747 }
748
749 static int cp210x_tiocmget (struct tty_struct *tty, struct file *file)
750 {
751 struct usb_serial_port *port = tty->driver_data;
752 unsigned int control;
753 int result;
754
755 dbg("%s - port %d", __func__, port->number);
756
757 cp210x_get_config(port, CP210X_GET_MDMSTS, &control, 1);
758
759 result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
760 |((control & CONTROL_RTS) ? TIOCM_RTS : 0)
761 |((control & CONTROL_CTS) ? TIOCM_CTS : 0)
762 |((control & CONTROL_DSR) ? TIOCM_DSR : 0)
763 |((control & CONTROL_RING)? TIOCM_RI : 0)
764 |((control & CONTROL_DCD) ? TIOCM_CD : 0);
765
766 dbg("%s - control = 0x%.2x", __func__, control);
767
768 return result;
769 }
770
771 static void cp210x_break_ctl (struct tty_struct *tty, int break_state)
772 {
773 struct usb_serial_port *port = tty->driver_data;
774 unsigned int state;
775
776 dbg("%s - port %d", __func__, port->number);
777 if (break_state == 0)
778 state = BREAK_OFF;
779 else
780 state = BREAK_ON;
781 dbg("%s - turning break %s", __func__,
782 state == BREAK_OFF ? "off" : "on");
783 cp210x_set_config(port, CP210X_SET_BREAK, &state, 2);
784 }
785
786 static int cp210x_startup(struct usb_serial *serial)
787 {
788 /* cp210x buffers behave strangely unless device is reset */
789 usb_reset_device(serial->dev);
790 return 0;
791 }
792
793 static void cp210x_disconnect(struct usb_serial *serial)
794 {
795 int i;
796
797 dbg("%s", __func__);
798
799 /* Stop reads and writes on all ports */
800 for (i = 0; i < serial->num_ports; ++i)
801 cp210x_cleanup(serial->port[i]);
802 }
803
804 static int __init cp210x_init(void)
805 {
806 int retval;
807
808 retval = usb_serial_register(&cp210x_device);
809 if (retval)
810 return retval; /* Failed to register */
811
812 retval = usb_register(&cp210x_driver);
813 if (retval) {
814 /* Failed to register */
815 usb_serial_deregister(&cp210x_device);
816 return retval;
817 }
818
819 /* Success */
820 printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
821 DRIVER_DESC "\n");
822 return 0;
823 }
824
825 static void __exit cp210x_exit(void)
826 {
827 usb_deregister(&cp210x_driver);
828 usb_serial_deregister(&cp210x_device);
829 }
830
831 module_init(cp210x_init);
832 module_exit(cp210x_exit);
833
834 MODULE_DESCRIPTION(DRIVER_DESC);
835 MODULE_VERSION(DRIVER_VERSION);
836 MODULE_LICENSE("GPL");
837
838 module_param(debug, bool, S_IRUGO | S_IWUSR);
839 MODULE_PARM_DESC(debug, "Enable verbose debugging messages");
Linux for Ginger Game Console